1 files changed, 0 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
deleted file mode 100644
index f39c77ee36ea..000000000000
--- a/Documentation/devicetree/bindings/display/truly,nt35597.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Truly model NT35597 DSI display driver
-
-The Truly NT35597 is a generic display driver, currently only configured
-for use in the 2K display on the Qualcomm SDM845 MTP board.
-
-Required properties:
-- compatible: should be "truly,nt35597-2K-display"
-- vdda-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply
-- vdispp-supply: phandle of the regulator that provides the supply voltage
-  for positive LCD bias
-- vdispn-supply: phandle of the regulator that provides the supply voltage
-  for negative LCD bias
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  (active low)
-- mode-gpios: phandle of the gpio for choosing the mode of the display
-  for single DSI or Dual DSI
-  This should be low for dual DSI and high for single DSI mode
-- ports: This device has two video ports driven by two DSIs. Their connections
-  are modeled using the OF graph bindings specified in
-  Documentation/devicetree/bindings/graph.txt.
-  - port@0: DSI input port driven by master DSI
-  - port@1: DSI input port driven by secondary DSI
-
-Example:
-
-	dsi@ae94000 {
-		panel@0 {
-			compatible = "truly,nt35597-2K-display";
-			reg = <0>;
-			vdda-supply = <&pm8998_l14>;
-			vdispp-supply = <&lab_regulator>;
-			vdispn-supply = <&ibb_regulator>;
-			pinctrl-names = "default", "suspend";
-			pinctrl-0 = <&dpu_dsi_active>;
-			pinctrl-1 = <&dpu_dsi_suspend>;
-
-			reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-			mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					panel0_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					panel1_in: endpoint {
-						remote-endpoint = <&dsi1_out>;
-					};
-				};
-			};
-		};
-	};