1 files changed, 0 insertions, 54 deletions
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
deleted file mode 100644
index 76d649b3a25d..000000000000
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Atmel Extensible Direct Memory Access Controller (XDMAC)
-
-* XDMA Controller
-Required properties:
-- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
-  "microchip,sama7g5-dma" or
-  "microchip,sam9x7-dma", "atmel,sama5d4-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain DMA interrupt.
-- #dma-cells: Must be <1>, used to represent the number of integer cells in
-the dmas property of client devices.
-  - The 1st cell specifies the channel configuration register:
-    - bit 13: SIF, source interface identifier, used to get the memory
-    interface identifier,
-    - bit 14: DIF, destination interface identifier, used to get the peripheral
-    interface identifier,
-    - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-dma1: dma-controller@f0004000 {
-	compatible = "atmel,sama5d4-dma";
-	reg = <0xf0004000 0x200>;
-	interrupts = <50 4 0>;
-	#dma-cells = <1>;
-};
-
-
-* DMA clients
-DMA clients connected to the Atmel XDMA controller must use the format
-described in the dma.txt file, using a one-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. Channel configuration register. Configurable fields are:
-    - bit 13: SIF, source interface identifier, used to get the memory
-    interface identifier,
-    - bit 14: DIF, destination interface identifier, used to get the peripheral
-    interface identifier,
-  - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-i2c2: i2c@f8024000 {
-	compatible = "atmel,at91sam9x5-i2c";
-	reg = <0xf8024000 0x4000>;
-	interrupts = <34 4 6>;
-	dmas = <&dma1
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-		 | AT91_XDMAC_DT_PERID(6))>,
-	       <&dma1
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-		| AT91_XDMAC_DT_PERID(7))>;
-	dma-names = "tx", "rx";
-};