1 files changed, 0 insertions, 131 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
deleted file mode 100644
index bdd173056f72..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
-
-The BCM2835 contains a custom top-level interrupt controller, which supports
-72 interrupt sources using a 2-level register scheme. The interrupt
-controller, or the HW block containing it, is referred to occasionally
-as "armctrl" in the SoC documentation, hence naming of this binding.
-
-The BCM2836 contains the same interrupt controller with the same
-interrupts, but the per-CPU interrupt controller is the root, and an
-interrupt there indicates that the ARMCTRL has an interrupt to handle.
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-  The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
-  pending" register, or 1/2 respectively for interrupts in the "IRQ pending
-  1/2" register.
-
-  The 2nd cell contains the interrupt number within the bank. Valid values
-  are 0..7 for bank 0, and 0..31 for bank 1.
-
-Additional required properties for brcm,bcm2836-armctrl-ic:
-- interrupts : Specifies the interrupt on the parent for this interrupt
-  controller to handle.
-
-The interrupt sources are as follows:
-
-Bank 0:
-0: ARM_TIMER
-1: ARM_MAILBOX
-2: ARM_DOORBELL_0
-3: ARM_DOORBELL_1
-4: VPU0_HALTED
-5: VPU1_HALTED
-6: ILLEGAL_TYPE0
-7: ILLEGAL_TYPE1
-
-Bank 1:
-0: TIMER0
-1: TIMER1
-2: TIMER2
-3: TIMER3
-4: CODEC0
-5: CODEC1
-6: CODEC2
-7: VC_JPEG
-8: ISP
-9: VC_USB
-10: VC_3D
-11: TRANSPOSER
-12: MULTICORESYNC0
-13: MULTICORESYNC1
-14: MULTICORESYNC2
-15: MULTICORESYNC3
-16: DMA0
-17: DMA1
-18: VC_DMA2
-19: VC_DMA3
-20: DMA4
-21: DMA5
-22: DMA6
-23: DMA7
-24: DMA8
-25: DMA9
-26: DMA10
-27: DMA11-14 - shared interrupt for DMA 11 to 14
-28: DMAALL - triggers on all dma interrupts (including channel 15)
-29: AUX
-30: ARM
-31: VPUDMA
-
-Bank 2:
-0: HOSTPORT
-1: VIDEOSCALER
-2: CCP2TX
-3: SDC
-4: DSI0
-5: AVE
-6: CAM0
-7: CAM1
-8: HDMI0
-9: HDMI1
-10: PIXELVALVE1
-11: I2CSPISLV
-12: DSI1
-13: PWA0
-14: PWA1
-15: CPR
-16: SMI
-17: GPIO0
-18: GPIO1
-19: GPIO2
-20: GPIO3
-21: VC_I2C
-22: VC_SPI
-23: VC_I2SPCM
-24: VC_SDIO
-25: VC_UART
-26: SLIMBUS
-27: VEC
-28: CPG
-29: RNG
-30: VC_ARASANSDIO
-31: AVSPMON
-
-Example:
-
-/* BCM2835, first level */
-intc: interrupt-controller {
-	compatible = "brcm,bcm2835-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-/* BCM2836, second level */
-intc: interrupt-controller {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
-};