1 files changed, 81 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml
new file mode 100644
index 000000000000..ca6a2ff43acd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm6345-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345-style Level 1 interrupt controller
+
+maintainers:
+  - Simon Arlott <simon@octiron.net>
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.
+
+  Key elements of the hardware design include:
+
+    - 32, 64 or 128 incoming level IRQ lines
+
+    - Most onchip peripherals are wired directly to an L1 input
+
+    - A separate instance of the register set for each CPU, allowing individual
+      peripheral IRQs to be routed to any CPU
+
+    - Contains one or more enable/status word pairs per CPU
+
+    - No atomic set/clear operations
+
+    - No polarity/level/edge settings
+
+    - No FIFO or priority encoder logic; software is expected to read all
+      2-4 status words to determine which IRQs are pending
+
+  If multiple reg ranges and interrupt-parent entries are present on an SMP
+  system, the driver will allow IRQ SMP affinity to be set up through the
+  /proc/irq/ interface.  In the simplest possible configuration, only one
+  reg range and one interrupt-parent is needed.
+
+  The driver operates in native CPU endian by default, there is no support for
+  specifying an alternative endianness.
+
+properties:
+  compatible:
+    const: brcm,bcm6345-l1-intc
+
+  reg:
+    description: One entry per CPU core
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: One entry per CPU core
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@10000000 {
+        compatible = "brcm,bcm6345-l1-intc";
+        reg = <0x10000020 0x20>,
+              <0x10000040 0x20>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupts = <2>, <3>;
+    };