diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt | 41 |
1 files changed, 0 insertions, 41 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt deleted file mode 100644 index 969b4582ec60..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt +++ /dev/null @@ -1,41 +0,0 @@ -Cirrus Logic CLPS711X Interrupt Controller - -Required properties: - -- compatible: Should be "cirrus,ep7209-intc". -- reg: Specifies base physical address of the registers set. -- interrupt-controller: Identifies the node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value shall be 1. - -The interrupt sources are as follows: -ID Name Description ---------------------------- -1: BLINT Battery low (FIQ) -3: MCINT Media changed (FIQ) -4: CSINT CODEC sound -5: EINT1 External 1 -6: EINT2 External 2 -7: EINT3 External 3 -8: TC1OI TC1 under flow -9: TC2OI TC2 under flow -10: RTCMI RTC compare match -11: TINT 64Hz tick -12: UTXINT1 UART1 transmit FIFO half empty -13: URXINT1 UART1 receive FIFO half full -14: UMSINT UART1 modem status changed -15: SSEOTI SSI1 end of transfer -16: KBDINT Keyboard -17: SS2RX SSI2 receive FIFO half or greater full -18: SS2TX SSI2 transmit FIFO less than half empty -28: UTXINT2 UART2 transmit FIFO half empty -29: URXINT2 UART2 receive FIFO half full -32: DAIINT DAI interface (FIQ) - -Example: - intc: interrupt-controller { - compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc"; - reg = <0x80000000 0x4000>; - interrupt-controller; - #interrupt-cells = <1>; - }; |