1 files changed, 0 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
deleted file mode 100644
index 0beafed502f5..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Marvell SEI (System Error Interrupt) Controller
------------------------------------------------
-
-Marvell SEI (System Error Interrupt) controller is an interrupt
-aggregator. It receives interrupts from several sources and aggregates
-them to a single interrupt line (an SPI) on the parent interrupt
-controller.
-
-This interrupt controller can handle up to 64 SEIs, a set comes from the
-AP and is wired while a second set comes from the CPs by the mean of
-MSIs.
-
-Required properties:
-
-- compatible: should be one of:
-              * "marvell,ap806-sei"
-- reg: SEI registers location and length.
-- interrupts: identifies the parent IRQ that will be triggered.
-- #interrupt-cells: number of cells to define an SEI wired interrupt
-                    coming from the AP, should be 1. The cell is the IRQ
-                    number.
-- interrupt-controller: identifies the node as an interrupt controller
-                        for AP interrupts.
-- msi-controller: identifies the node as an MSI controller for the CPs
-                  interrupts.
-
-Example:
-
-        sei: interrupt-controller@3f0200 {
-                compatible = "marvell,ap806-sei";
-                reg = <0x3f0200 0x40>;
-                interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-                #interrupt-cells = <1>;
-                interrupt-controller;
-                msi-controller;
-        };