1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
deleted file mode 100644
index 77f4b0a7fd2b..000000000000
--- a/Documentation/devicetree/bindings/media/imx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Freescale i.MX Media Video Device
-=================================
-
-Video Media Controller node
----------------------------
-
-This is the media controller node for video capture support. It is a
-virtual device that lists the camera serial interface nodes that the
-media device will control.
-
-Required properties:
-- compatible : "fsl,imx-capture-subsystem";
-- ports      : Should contain a list of phandles pointing to camera
-		sensor interface ports of IPU devices
-
-example:
-
-capture-subsystem {
-	compatible = "fsl,imx-capture-subsystem";
-	ports = <&ipu1_csi0>, <&ipu1_csi1>;
-};
-
-
-mipi_csi2 node
---------------
-
-This is the device node for the MIPI CSI-2 Receiver core in the i.MX
-SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
-combined with a D-PHY core mixed into the same register block. In
-addition this device consists of an i.MX-specific "CSI2IPU gasket"
-glue logic, also controlled from the same register block. The CSI2IPU
-gasket demultiplexes the four virtual channel streams from the host
-controller's 32-bit output image bus onto four 16-bit parallel busses
-to the i.MX IPU CSIs.
-
-Required properties:
-- compatible	: "fsl,imx6-mipi-csi2";
-- reg           : physical base address and length of the register set;
-- clocks	: the MIPI CSI-2 receiver requires three clocks: hsi_tx
-		  (the D-PHY clock), video_27m (D-PHY PLL reference
-		  clock), and eim_podf;
-- clock-names	: must contain "dphy", "ref", "pix";
-- port@*        : five port nodes must exist, containing endpoints
-		  connecting to the source and sink devices according to
-		  of_graph bindings. The first port is an input port,
-		  connecting with a MIPI CSI-2 source, and ports 1
-		  through 4 are output ports connecting with parallel
-		  bus sink endpoint nodes and correspond to the four
-		  MIPI CSI-2 virtual channel outputs.
-
-Optional properties:
-- interrupts	: must contain two level-triggered interrupts,
-		  in order: 100 and 101;