1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
deleted file mode 100644
index bfa3703a7446..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale i.MX7ULP IOMUX Controller
-
-i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
-ports and IOMUXC DDR for DDR interface.
-
-Note:
-This binding doc is only for the IOMUXC1 support in A7 Domain and it only
-supports generic pin config.
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding
-part and usage.
-
-Required properties:
-- compatible:	"fsl,imx7ulp-iomuxc1".
-- fsl,pins:	Each entry consists of 5 integers which represents the mux
-		and config setting for one pin. The first 4 integers
-		<mux_conf_reg input_reg mux_mode input_val> are specified
-		using a PIN_FUNC_ID macro, which can be found in
-		imx7ulp-pinfunc.h in the device tree source folder.
-		The last integer CONFIG is the pad setting value like
-		pull-up on this pin.
-
-		Please refer to i.MX7ULP Reference Manual for detailed
-		CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_OBE		(1 << 17)
-PAD_CTL_IBE		(1 << 16)
-PAD_CTL_LK		(1 << 16)
-PAD_CTL_DSE_HI		(1 << 6)
-PAD_CTL_DSE_STD		(0 << 6)
-PAD_CTL_ODE		(1 << 5)
-PAD_CTL_PUSH_PULL	(0 << 5)
-PAD_CTL_SRE_SLOW	(1 << 2)
-PAD_CTL_SRE_STD		(0 << 2)
-PAD_CTL_PE		(1 << 0)
-
-Examples:
-#include "imx7ulp-pinfunc.h"
-
-/* Pin Controller Node */
-iomuxc1: pinctrl@40ac0000 {
-	compatible = "fsl,imx7ulp-iomuxc1";
-	reg = <0x40ac0000 0x1000>;
-
-	/* Pin Configuration Node */
-	pinctrl_lpuart4: lpuart4grp {
-		fsl,pins = <
-			IMX7ULP_PAD_PTC3__LPUART4_RX	0x1
-			IMX7ULP_PAD_PTC2__LPUART4_TX	0x1
-		>;
-	};
-};