diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml | 83 |
1 files changed, 83 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml new file mode 100644 index 000000000000..3e13587df310 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-iomuxc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,vf610-iomuxc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Vybrid VF610 IOMUX Controller + +description: + Please refer to fsl,imx-pinctrl.txt in this directory for common binding part + and usage. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,vf610-iomuxc + + reg: + maxItems: 1 + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + two integers array, represents a group of pins mux and config setting. + The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a pin + working on a specific function, CONFIG is the pad setting value such + as pull-up, speed, ode for this pin. Please refer to Vybrid VF610 + datasheet for the valid pad config settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: + PIN_FUN_ID refer to vf610-pinfunc.h in device tree source folder + for all available PIN_FUNC_ID for Vybrid VF610. + - description: | + CONFIG bits definition is + PAD_CTL_SPEED_LOW (1 << 12) + PAD_CTL_SPEED_MED (2 << 12) + PAD_CTL_SPEED_HIGH (3 << 12) + PAD_CTL_SRE_FAST (1 << 11) + PAD_CTL_SRE_SLOW (0 << 11) + PAD_CTL_ODE (1 << 10) + PAD_CTL_HYS (1 << 9) + PAD_CTL_DSE_DISABLE (0 << 6) + PAD_CTL_DSE_150ohm (1 << 6) + PAD_CTL_DSE_75ohm (2 << 6) + PAD_CTL_DSE_50ohm (3 << 6) + PAD_CTL_DSE_37ohm (4 << 6) + PAD_CTL_DSE_30ohm (5 << 6) + PAD_CTL_DSE_25ohm (6 << 6) + PAD_CTL_DSE_20ohm (7 << 6) + PAD_CTL_PUS_100K_DOWN (0 << 4) + PAD_CTL_PUS_47K_UP (1 << 4) + PAD_CTL_PUS_100K_UP (2 << 4) + PAD_CTL_PUS_22K_UP (3 << 4) + PAD_CTL_PKE (1 << 3) + PAD_CTL_PUE (1 << 2) + PAD_CTL_OBE_ENABLE (1 << 1) + PAD_CTL_IBE_ENABLE (1 << 0) + PAD_CTL_OBE_IBE_ENABLE (3 << 0) + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: pinctrl.yaml# + +unevaluatedProperties: false |