diff options
Diffstat (limited to 'drivers/usb/gadget/udc/mv_udc_core.c')
| -rw-r--r-- | drivers/usb/gadget/udc/mv_udc_core.c | 2426 |
1 files changed, 0 insertions, 2426 deletions
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c deleted file mode 100644 index ff103e6b3048..000000000000 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ /dev/null @@ -1,2426 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * Author: Chao Xie <chao.xie@marvell.com> - * Neil Zhang <zhangwm@marvell.com> - */ - -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/dmapool.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> -#include <linux/moduleparam.h> -#include <linux/device.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb/otg.h> -#include <linux/pm.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/platform_data/mv_usb.h> -#include <linux/unaligned.h> - -#include "mv_udc.h" - -#define DRIVER_DESC "Marvell PXA USB Device Controller driver" - -#define ep_dir(ep) (((ep)->ep_num == 0) ? \ - ((ep)->udc->ep0_dir) : ((ep)->direction)) - -/* timeout value -- usec */ -#define RESET_TIMEOUT 10000 -#define FLUSH_TIMEOUT 10000 -#define EPSTATUS_TIMEOUT 10000 -#define PRIME_TIMEOUT 10000 -#define READSAFE_TIMEOUT 1000 - -#define LOOPS_USEC_SHIFT 1 -#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) -#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) - -static DECLARE_COMPLETION(release_done); - -static const char driver_name[] = "mv_udc"; - -static void nuke(struct mv_ep *ep, int status); -static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); - -/* for endpoint 0 operations */ -static const struct usb_endpoint_descriptor mv_ep0_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = 0, - .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - .wMaxPacketSize = EP0_MAX_PKT_SIZE, -}; - -static void ep0_reset(struct mv_udc *udc) -{ - struct mv_ep *ep; - u32 epctrlx; - int i = 0; - - /* ep0 in and out */ - for (i = 0; i < 2; i++) { - ep = &udc->eps[i]; - ep->udc = udc; - - /* ep0 dQH */ - ep->dqh = &udc->ep_dqh[i]; - - /* configure ep0 endpoint capabilities in dQH */ - ep->dqh->max_packet_length = - (EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) - | EP_QUEUE_HEAD_IOS; - - ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE; - - epctrlx = readl(&udc->op_regs->epctrlx[0]); - if (i) { /* TX */ - epctrlx |= EPCTRL_TX_ENABLE - | (USB_ENDPOINT_XFER_CONTROL - << EPCTRL_TX_EP_TYPE_SHIFT); - - } else { /* RX */ - epctrlx |= EPCTRL_RX_ENABLE - | (USB_ENDPOINT_XFER_CONTROL - << EPCTRL_RX_EP_TYPE_SHIFT); - } - - writel(epctrlx, &udc->op_regs->epctrlx[0]); - } -} - -/* protocol ep0 stall, will automatically be cleared on new transaction */ -static void ep0_stall(struct mv_udc *udc) -{ - u32 epctrlx; - - /* set TX and RX to stall */ - epctrlx = readl(&udc->op_regs->epctrlx[0]); - epctrlx |= EPCTRL_RX_EP_STALL | EPCTRL_TX_EP_STALL; - writel(epctrlx, &udc->op_regs->epctrlx[0]); - - /* update ep0 state */ - udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = EP_DIR_OUT; -} - -static int process_ep_req(struct mv_udc *udc, int index, - struct mv_req *curr_req) -{ - struct mv_dtd *curr_dtd; - struct mv_dqh *curr_dqh; - int actual, remaining_length; - int i, direction; - int retval = 0; - u32 errors; - u32 bit_pos; - - curr_dqh = &udc->ep_dqh[index]; - direction = index % 2; - - curr_dtd = curr_req->head; - actual = curr_req->req.length; - - for (i = 0; i < curr_req->dtd_count; i++) { - if (curr_dtd->size_ioc_sts & DTD_STATUS_ACTIVE) { - dev_dbg(&udc->dev->dev, "%s, dTD not completed\n", - udc->eps[index].name); - return 1; - } - - errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK; - if (!errors) { - remaining_length = - (curr_dtd->size_ioc_sts & DTD_PACKET_SIZE) - >> DTD_LENGTH_BIT_POS; - actual -= remaining_length; - - if (remaining_length) { - if (direction) { - dev_dbg(&udc->dev->dev, - "TX dTD remains data\n"); - retval = -EPROTO; - break; - } else - break; - } - } else { - dev_info(&udc->dev->dev, - "complete_tr error: ep=%d %s: error = 0x%x\n", - index >> 1, direction ? "SEND" : "RECV", - errors); - if (errors & DTD_STATUS_HALTED) { - /* Clear the errors and Halt condition */ - curr_dqh->size_ioc_int_sts &= ~errors; - retval = -EPIPE; - } else if (errors & DTD_STATUS_DATA_BUFF_ERR) { - retval = -EPROTO; - } else if (errors & DTD_STATUS_TRANSACTION_ERR) { - retval = -EILSEQ; - } - } - if (i != curr_req->dtd_count - 1) - curr_dtd = (struct mv_dtd *)curr_dtd->next_dtd_virt; - } - if (retval) - return retval; - - if (direction == EP_DIR_OUT) - bit_pos = 1 << curr_req->ep->ep_num; - else - bit_pos = 1 << (16 + curr_req->ep->ep_num); - - while (curr_dqh->curr_dtd_ptr == curr_dtd->td_dma) { - if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) { - while (readl(&udc->op_regs->epstatus) & bit_pos) - udelay(1); - break; - } - udelay(1); - } - - curr_req->req.actual = actual; - - return 0; -} - -/* - * done() - retire a request; caller blocked irqs - * @status : request status to be set, only works when - * request is still in progress. - */ -static void done(struct mv_ep *ep, struct mv_req *req, int status) - __releases(&ep->udc->lock) - __acquires(&ep->udc->lock) -{ - struct mv_udc *udc = NULL; - unsigned char stopped = ep->stopped; - struct mv_dtd *curr_td, *next_td; - int j; - - udc = (struct mv_udc *)ep->udc; - /* Removed the req from fsl_ep->queue */ - list_del_init(&req->queue); - - /* req.status should be set as -EINPROGRESS in ep_queue() */ - if (req->req.status == -EINPROGRESS) - req->req.status = status; - else - status = req->req.status; - - /* Free dtd for the request */ - next_td = req->head; - for (j = 0; j < req->dtd_count; j++) { - curr_td = next_td; - if (j != req->dtd_count - 1) - next_td = curr_td->next_dtd_virt; - dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma); - } - - usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep)); - - if (status && (status != -ESHUTDOWN)) - dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u", - ep->ep.name, &req->req, status, - req->req.actual, req->req.length); - - ep->stopped = 1; - - spin_unlock(&ep->udc->lock); - - usb_gadget_giveback_request(&ep->ep, &req->req); - - spin_lock(&ep->udc->lock); - ep->stopped = stopped; -} - -static int queue_dtd(struct mv_ep *ep, struct mv_req *req) -{ - struct mv_udc *udc; - struct mv_dqh *dqh; - u32 bit_pos, direction; - u32 usbcmd, epstatus; - unsigned int loops; - int retval = 0; - - udc = ep->udc; - direction = ep_dir(ep); - dqh = &(udc->ep_dqh[ep->ep_num * 2 + direction]); - bit_pos = 1 << (((direction == EP_DIR_OUT) ? 0 : 16) + ep->ep_num); - - /* check if the pipe is empty */ - if (!(list_empty(&ep->queue))) { - struct mv_req *lastreq; - lastreq = list_entry(ep->queue.prev, struct mv_req, queue); - lastreq->tail->dtd_next = - req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; - - wmb(); - - if (readl(&udc->op_regs->epprime) & bit_pos) - goto done; - - loops = LOOPS(READSAFE_TIMEOUT); - while (1) { - /* start with setting the semaphores */ - usbcmd = readl(&udc->op_regs->usbcmd); - usbcmd |= USBCMD_ATDTW_TRIPWIRE_SET; - writel(usbcmd, &udc->op_regs->usbcmd); - - /* read the endpoint status */ - epstatus = readl(&udc->op_regs->epstatus) & bit_pos; - - /* - * Reread the ATDTW semaphore bit to check if it is - * cleared. When hardware see a hazard, it will clear - * the bit or else we remain set to 1 and we can - * proceed with priming of endpoint if not already - * primed. - */ - if (readl(&udc->op_regs->usbcmd) - & USBCMD_ATDTW_TRIPWIRE_SET) - break; - - loops--; - if (loops == 0) { - dev_err(&udc->dev->dev, - "Timeout for ATDTW_TRIPWIRE...\n"); - retval = -ETIME; - goto done; - } - udelay(LOOPS_USEC); - } - - /* Clear the semaphore */ - usbcmd = readl(&udc->op_regs->usbcmd); - usbcmd &= USBCMD_ATDTW_TRIPWIRE_CLEAR; - writel(usbcmd, &udc->op_regs->usbcmd); - - if (epstatus) - goto done; - } - - /* Write dQH next pointer and terminate bit to 0 */ - dqh->next_dtd_ptr = req->head->td_dma - & EP_QUEUE_HEAD_NEXT_POINTER_MASK; - - /* clear active and halt bit, in case set from a previous error */ - dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED); - - /* Ensure that updates to the QH will occur before priming. */ - wmb(); - - /* Prime the Endpoint */ - writel(bit_pos, &udc->op_regs->epprime); - -done: - return retval; -} - -static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, - dma_addr_t *dma, int *is_last) -{ - struct mv_dtd *dtd; - struct mv_udc *udc; - struct mv_dqh *dqh; - u32 temp, mult = 0; - - /* how big will this transfer be? */ - if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) { - dqh = req->ep->dqh; - mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS) - & 0x3; - *length = min(req->req.length - req->req.actual, - (unsigned)(mult * req->ep->ep.maxpacket)); - } else - *length = min(req->req.length - req->req.actual, - (unsigned)EP_MAX_LENGTH_TRANSFER); - - udc = req->ep->udc; - - /* - * Be careful that no _GFP_HIGHMEM is set, - * or we can not use dma_to_virt - */ - dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma); - if (dtd == NULL) - return dtd; - - dtd->td_dma = *dma; - /* initialize buffer page pointers */ - temp = (u32)(req->req.dma + req->req.actual); - dtd->buff_ptr0 = cpu_to_le32(temp); - temp &= ~0xFFF; - dtd->buff_ptr1 = cpu_to_le32(temp + 0x1000); - dtd->buff_ptr2 = cpu_to_le32(temp + 0x2000); - dtd->buff_ptr3 = cpu_to_le32(temp + 0x3000); - dtd->buff_ptr4 = cpu_to_le32(temp + 0x4000); - - req->req.actual += *length; - - /* zlp is needed if req->req.zero is set */ - if (req->req.zero) { - if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) - *is_last = 1; - else - *is_last = 0; - } else if (req->req.length == req->req.actual) - *is_last = 1; - else - *is_last = 0; - - /* Fill in the transfer size; set active bit */ - temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); - - /* Enable interrupt for the last dtd of a request */ - if (*is_last && !req->req.no_interrupt) - temp |= DTD_IOC; - - temp |= mult << 10; - - dtd->size_ioc_sts = temp; - - mb(); - - return dtd; -} - -/* generate dTD linked list for a request */ -static int req_to_dtd(struct mv_req *req) -{ - unsigned count; - int is_last, is_first = 1; - struct mv_dtd *dtd, *last_dtd = NULL; - dma_addr_t dma; - - do { - dtd = build_dtd(req, &count, &dma, &is_last); - if (dtd == NULL) - return -ENOMEM; - - if (is_first) { - is_first = 0; - req->head = dtd; - } else { - last_dtd->dtd_next = dma; - last_dtd->next_dtd_virt = dtd; - } - last_dtd = dtd; - req->dtd_count++; - } while (!is_last); - - /* set terminate bit to 1 for the last dTD */ - dtd->dtd_next = DTD_NEXT_TERMINATE; - - req->tail = dtd; - - return 0; -} - -static int mv_ep_enable(struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct mv_udc *udc; - struct mv_ep *ep; - struct mv_dqh *dqh; - u16 max = 0; - u32 bit_pos, epctrlx, direction; - const unsigned char zlt = 1; - unsigned char ios, mult; - unsigned long flags; - - ep = container_of(_ep, struct mv_ep, ep); - udc = ep->udc; - - if (!_ep || !desc - || desc->bDescriptorType != USB_DT_ENDPOINT) - return -EINVAL; - - if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - direction = ep_dir(ep); - max = usb_endpoint_maxp(desc); - - /* - * disable HW zero length termination select - * driver handles zero length packet through req->req.zero - */ - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); - - /* Check if the Endpoint is Primed */ - if ((readl(&udc->op_regs->epprime) & bit_pos) - || (readl(&udc->op_regs->epstatus) & bit_pos)) { - dev_info(&udc->dev->dev, - "ep=%d %s: Init ERROR: ENDPTPRIME=0x%x," - " ENDPTSTATUS=0x%x, bit_pos=0x%x\n", - (unsigned)ep->ep_num, direction ? "SEND" : "RECV", - (unsigned)readl(&udc->op_regs->epprime), - (unsigned)readl(&udc->op_regs->epstatus), - (unsigned)bit_pos); - goto en_done; - } - - /* Set the max packet length, interrupt on Setup and Mult fields */ - ios = 0; - mult = 0; - switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - break; - case USB_ENDPOINT_XFER_CONTROL: - ios = 1; - break; - case USB_ENDPOINT_XFER_ISOC: - /* Calculate transactions needed for high bandwidth iso */ - mult = usb_endpoint_maxp_mult(desc); - /* 3 transactions at most */ - if (mult > 3) - goto en_done; - break; - default: - goto en_done; - } - - spin_lock_irqsave(&udc->lock, flags); - /* Get the endpoint queue head address */ - dqh = ep->dqh; - dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) - | (mult << EP_QUEUE_HEAD_MULT_POS) - | (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0) - | (ios ? EP_QUEUE_HEAD_IOS : 0); - dqh->next_dtd_ptr = 1; - dqh->size_ioc_int_sts = 0; - - ep->ep.maxpacket = max; - ep->ep.desc = desc; - ep->stopped = 0; - - /* Enable the endpoint for Rx or Tx and set the endpoint type */ - epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); - if (direction == EP_DIR_IN) { - epctrlx &= ~EPCTRL_TX_ALL_MASK; - epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST - | ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - << EPCTRL_TX_EP_TYPE_SHIFT); - } else { - epctrlx &= ~EPCTRL_RX_ALL_MASK; - epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST - | ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - << EPCTRL_RX_EP_TYPE_SHIFT); - } - writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); - - /* - * Implement Guideline (GL# USB-7) The unused endpoint type must - * be programmed to bulk. - */ - epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); - if ((epctrlx & EPCTRL_RX_ENABLE) == 0) { - epctrlx |= (USB_ENDPOINT_XFER_BULK - << EPCTRL_RX_EP_TYPE_SHIFT); - writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); - } - - epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); - if ((epctrlx & EPCTRL_TX_ENABLE) == 0) { - epctrlx |= (USB_ENDPOINT_XFER_BULK - << EPCTRL_TX_EP_TYPE_SHIFT); - writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); - } - - spin_unlock_irqrestore(&udc->lock, flags); - - return 0; -en_done: - return -EINVAL; -} - -static int mv_ep_disable(struct usb_ep *_ep) -{ - struct mv_udc *udc; - struct mv_ep *ep; - struct mv_dqh *dqh; - u32 epctrlx, direction; - unsigned long flags; - - ep = container_of(_ep, struct mv_ep, ep); - if ((_ep == NULL) || !ep->ep.desc) - return -EINVAL; - - udc = ep->udc; - - /* Get the endpoint queue head address */ - dqh = ep->dqh; - - spin_lock_irqsave(&udc->lock, flags); - - direction = ep_dir(ep); - - /* Reset the max packet length and the interrupt on Setup */ - dqh->max_packet_length = 0; - - /* Disable the endpoint for Rx or Tx and reset the endpoint type */ - epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); - epctrlx &= ~((direction == EP_DIR_IN) - ? (EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE) - : (EPCTRL_RX_ENABLE | EPCTRL_RX_TYPE)); - writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); - - /* nuke all pending requests (does flush) */ - nuke(ep, -ESHUTDOWN); - - ep->ep.desc = NULL; - ep->stopped = 1; - - spin_unlock_irqrestore(&udc->lock, flags); - - return 0; -} - -static struct usb_request * -mv_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) -{ - struct mv_req *req; - - req = kzalloc(sizeof *req, gfp_flags); - if (!req) - return NULL; - - req->req.dma = DMA_ADDR_INVALID; - INIT_LIST_HEAD(&req->queue); - - return &req->req; -} - -static void mv_free_request(struct usb_ep *_ep, struct usb_request *_req) -{ - struct mv_req *req = NULL; - - req = container_of(_req, struct mv_req, req); - - if (_req) - kfree(req); -} - -static void mv_ep_fifo_flush(struct usb_ep *_ep) -{ - struct mv_udc *udc; - u32 bit_pos, direction; - struct mv_ep *ep; - unsigned int loops; - - if (!_ep) - return; - - ep = container_of(_ep, struct mv_ep, ep); - if (!ep->ep.desc) - return; - - udc = ep->udc; - direction = ep_dir(ep); - - if (ep->ep_num == 0) - bit_pos = (1 << 16) | 1; - else if (direction == EP_DIR_OUT) - bit_pos = 1 << ep->ep_num; - else - bit_pos = 1 << (16 + ep->ep_num); - - loops = LOOPS(EPSTATUS_TIMEOUT); - do { - unsigned int inter_loops; - - if (loops == 0) { - dev_err(&udc->dev->dev, - "TIMEOUT for ENDPTSTATUS=0x%x, bit_pos=0x%x\n", - (unsigned)readl(&udc->op_regs->epstatus), - (unsigned)bit_pos); - return; - } - /* Write 1 to the Flush register */ - writel(bit_pos, &udc->op_regs->epflush); - - /* Wait until flushing completed */ - inter_loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush)) { - /* - * ENDPTFLUSH bit should be cleared to indicate this - * operation is complete - */ - if (inter_loops == 0) { - dev_err(&udc->dev->dev, - "TIMEOUT for ENDPTFLUSH=0x%x," - "bit_pos=0x%x\n", - (unsigned)readl(&udc->op_regs->epflush), - (unsigned)bit_pos); - return; - } - inter_loops--; - udelay(LOOPS_USEC); - } - loops--; - } while (readl(&udc->op_regs->epstatus) & bit_pos); -} - -/* queues (submits) an I/O request to an endpoint */ -static int -mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) -{ - struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); - struct mv_req *req = container_of(_req, struct mv_req, req); - struct mv_udc *udc = ep->udc; - unsigned long flags; - int retval; - - /* catch various bogus parameters */ - if (!_req || !req->req.complete || !req->req.buf - || !list_empty(&req->queue)) { - dev_err(&udc->dev->dev, "%s, bad params", __func__); - return -EINVAL; - } - if (unlikely(!_ep || !ep->ep.desc)) { - dev_err(&udc->dev->dev, "%s, bad ep", __func__); - return -EINVAL; - } - - udc = ep->udc; - if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - req->ep = ep; - - /* map virtual address to hardware */ - retval = usb_gadget_map_request(&udc->gadget, _req, ep_dir(ep)); - if (retval) - return retval; - - req->req.status = -EINPROGRESS; - req->req.actual = 0; - req->dtd_count = 0; - - spin_lock_irqsave(&udc->lock, flags); - - /* build dtds and push them to device queue */ - if (!req_to_dtd(req)) { - retval = queue_dtd(ep, req); - if (retval) { - spin_unlock_irqrestore(&udc->lock, flags); - dev_err(&udc->dev->dev, "Failed to queue dtd\n"); - goto err_unmap_dma; - } - } else { - spin_unlock_irqrestore(&udc->lock, flags); - dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n"); - retval = -ENOMEM; - goto err_unmap_dma; - } - - /* Update ep0 state */ - if (ep->ep_num == 0) - udc->ep0_state = DATA_STATE_XMIT; - - /* irq handler advances the queue */ - list_add_tail(&req->queue, &ep->queue); - spin_unlock_irqrestore(&udc->lock, flags); - - return 0; - -err_unmap_dma: - usb_gadget_unmap_request(&udc->gadget, _req, ep_dir(ep)); - - return retval; -} - -static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req) -{ - struct mv_dqh *dqh = ep->dqh; - u32 bit_pos; - - /* Write dQH next pointer and terminate bit to 0 */ - dqh->next_dtd_ptr = req->head->td_dma - & EP_QUEUE_HEAD_NEXT_POINTER_MASK; - - /* clear active and halt bit, in case set from a previous error */ - dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED); - - /* Ensure that updates to the QH will occure before priming. */ - wmb(); - - bit_pos = 1 << (((ep_dir(ep) == EP_DIR_OUT) ? 0 : 16) + ep->ep_num); - - /* Prime the Endpoint */ - writel(bit_pos, &ep->udc->op_regs->epprime); -} - -/* dequeues (cancels, unlinks) an I/O request from an endpoint */ -static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); - struct mv_req *req = NULL, *iter; - struct mv_udc *udc = ep->udc; - unsigned long flags; - int stopped, ret = 0; - u32 epctrlx; - - if (!_ep || !_req) - return -EINVAL; - - spin_lock_irqsave(&ep->udc->lock, flags); - stopped = ep->stopped; - - /* Stop the ep before we deal with the queue */ - ep->stopped = 1; - epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); - if (ep_dir(ep) == EP_DIR_IN) - epctrlx &= ~EPCTRL_TX_ENABLE; - else - epctrlx &= ~EPCTRL_RX_ENABLE; - writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); - - /* make sure it's actually queued on this endpoint */ - list_for_each_entry(iter, &ep->queue, queue) { - if (&iter->req != _req) - continue; - req = iter; - break; - } - if (!req) { - ret = -EINVAL; - goto out; - } - - /* The request is in progress, or completed but not dequeued */ - if (ep->queue.next == &req->queue) { - _req->status = -ECONNRESET; - mv_ep_fifo_flush(_ep); /* flush current transfer */ - - /* The request isn't the last request in this ep queue */ - if (req->queue.next != &ep->queue) { - struct mv_req *next_req; - - next_req = list_entry(req->queue.next, - struct mv_req, queue); - - /* Point the QH to the first TD of next request */ - mv_prime_ep(ep, next_req); - } else { - struct mv_dqh *qh; - - qh = ep->dqh; - qh->next_dtd_ptr = 1; - qh->size_ioc_int_sts = 0; - } - - /* The request hasn't been processed, patch up the TD chain */ - } else { - struct mv_req *prev_req; - - prev_req = list_entry(req->queue.prev, struct mv_req, queue); - writel(readl(&req->tail->dtd_next), - &prev_req->tail->dtd_next); - - } - - done(ep, req, -ECONNRESET); - - /* Enable EP */ -out: - epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); - if (ep_dir(ep) == EP_DIR_IN) - epctrlx |= EPCTRL_TX_ENABLE; - else - epctrlx |= EPCTRL_RX_ENABLE; - writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); - ep->stopped = stopped; - - spin_unlock_irqrestore(&ep->udc->lock, flags); - return ret; -} - -static void ep_set_stall(struct mv_udc *udc, u8 ep_num, u8 direction, int stall) -{ - u32 epctrlx; - - epctrlx = readl(&udc->op_regs->epctrlx[ep_num]); - - if (stall) { - if (direction == EP_DIR_IN) - epctrlx |= EPCTRL_TX_EP_STALL; - else - epctrlx |= EPCTRL_RX_EP_STALL; - } else { - if (direction == EP_DIR_IN) { - epctrlx &= ~EPCTRL_TX_EP_STALL; - epctrlx |= EPCTRL_TX_DATA_TOGGLE_RST; - } else { - epctrlx &= ~EPCTRL_RX_EP_STALL; - epctrlx |= EPCTRL_RX_DATA_TOGGLE_RST; - } - } - writel(epctrlx, &udc->op_regs->epctrlx[ep_num]); -} - -static int ep_is_stall(struct mv_udc *udc, u8 ep_num, u8 direction) -{ - u32 epctrlx; - - epctrlx = readl(&udc->op_regs->epctrlx[ep_num]); - - if (direction == EP_DIR_OUT) - return (epctrlx & EPCTRL_RX_EP_STALL) ? 1 : 0; - else - return (epctrlx & EPCTRL_TX_EP_STALL) ? 1 : 0; -} - -static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) -{ - struct mv_ep *ep; - unsigned long flags; - int status = 0; - struct mv_udc *udc; - - ep = container_of(_ep, struct mv_ep, ep); - udc = ep->udc; - if (!_ep || !ep->ep.desc) { - status = -EINVAL; - goto out; - } - - if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - status = -EOPNOTSUPP; - goto out; - } - - /* - * Attempt to halt IN ep will fail if any transfer requests - * are still queue - */ - if (halt && (ep_dir(ep) == EP_DIR_IN) && !list_empty(&ep->queue)) { - status = -EAGAIN; - goto out; - } - - spin_lock_irqsave(&ep->udc->lock, flags); - ep_set_stall(udc, ep->ep_num, ep_dir(ep), halt); - if (halt && wedge) - ep->wedge = 1; - else if (!halt) - ep->wedge = 0; - spin_unlock_irqrestore(&ep->udc->lock, flags); - - if (ep->ep_num == 0) { - udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = EP_DIR_OUT; - } -out: - return status; -} - -static int mv_ep_set_halt(struct usb_ep *_ep, int halt) -{ - return mv_ep_set_halt_wedge(_ep, halt, 0); -} - -static int mv_ep_set_wedge(struct usb_ep *_ep) -{ - return mv_ep_set_halt_wedge(_ep, 1, 1); -} - -static const struct usb_ep_ops mv_ep_ops = { - .enable = mv_ep_enable, - .disable = mv_ep_disable, - - .alloc_request = mv_alloc_request, - .free_request = mv_free_request, - - .queue = mv_ep_queue, - .dequeue = mv_ep_dequeue, - - .set_wedge = mv_ep_set_wedge, - .set_halt = mv_ep_set_halt, - .fifo_flush = mv_ep_fifo_flush, /* flush fifo */ -}; - -static int udc_clock_enable(struct mv_udc *udc) -{ - return clk_prepare_enable(udc->clk); -} - -static void udc_clock_disable(struct mv_udc *udc) -{ - clk_disable_unprepare(udc->clk); -} - -static void udc_stop(struct mv_udc *udc) -{ - u32 tmp; - - /* Disable interrupts */ - tmp = readl(&udc->op_regs->usbintr); - tmp &= ~(USBINTR_INT_EN | USBINTR_ERR_INT_EN | - USBINTR_PORT_CHANGE_DETECT_EN | USBINTR_RESET_EN); - writel(tmp, &udc->op_regs->usbintr); - - udc->stopped = 1; - - /* Reset the Run the bit in the command register to stop VUSB */ - tmp = readl(&udc->op_regs->usbcmd); - tmp &= ~USBCMD_RUN_STOP; - writel(tmp, &udc->op_regs->usbcmd); -} - -static void udc_start(struct mv_udc *udc) -{ - u32 usbintr; - - usbintr = USBINTR_INT_EN | USBINTR_ERR_INT_EN - | USBINTR_PORT_CHANGE_DETECT_EN - | USBINTR_RESET_EN | USBINTR_DEVICE_SUSPEND; - /* Enable interrupts */ - writel(usbintr, &udc->op_regs->usbintr); - - udc->stopped = 0; - - /* Set the Run bit in the command register */ - writel(USBCMD_RUN_STOP, &udc->op_regs->usbcmd); -} - -static int udc_reset(struct mv_udc *udc) -{ - unsigned int loops; - u32 tmp, portsc; - - /* Stop the controller */ - tmp = readl(&udc->op_regs->usbcmd); - tmp &= ~USBCMD_RUN_STOP; - writel(tmp, &udc->op_regs->usbcmd); - - /* Reset the controller to get default values */ - writel(USBCMD_CTRL_RESET, &udc->op_regs->usbcmd); - - /* wait for reset to complete */ - loops = LOOPS(RESET_TIMEOUT); - while (readl(&udc->op_regs->usbcmd) & USBCMD_CTRL_RESET) { - if (loops == 0) { - dev_err(&udc->dev->dev, - "Wait for RESET completed TIMEOUT\n"); - return -ETIMEDOUT; - } - loops--; - udelay(LOOPS_USEC); - } - - /* set controller to device mode */ - tmp = readl(&udc->op_regs->usbmode); - tmp |= USBMODE_CTRL_MODE_DEVICE; - - /* turn setup lockout off, require setup tripwire in usbcmd */ - tmp |= USBMODE_SETUP_LOCK_OFF; - - writel(tmp, &udc->op_regs->usbmode); - - writel(0x0, &udc->op_regs->epsetupstat); - - /* Configure the Endpoint List Address */ - writel(udc->ep_dqh_dma & USB_EP_LIST_ADDRESS_MASK, - &udc->op_regs->eplistaddr); - - portsc = readl(&udc->op_regs->portsc[0]); - if (readl(&udc->cap_regs->hcsparams) & HCSPARAMS_PPC) - portsc &= (~PORTSCX_W1C_BITS | ~PORTSCX_PORT_POWER); - - if (udc->force_fs) - portsc |= PORTSCX_FORCE_FULL_SPEED_CONNECT; - else - portsc &= (~PORTSCX_FORCE_FULL_SPEED_CONNECT); - - writel(portsc, &udc->op_regs->portsc[0]); - - tmp = readl(&udc->op_regs->epctrlx[0]); - tmp &= ~(EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL); - writel(tmp, &udc->op_regs->epctrlx[0]); - - return 0; -} - -static int mv_udc_enable_internal(struct mv_udc *udc) -{ - int retval; - - if (udc->active) - return 0; - - dev_dbg(&udc->dev->dev, "enable udc\n"); - retval = udc_clock_enable(udc); - if (retval) - return retval; - - if (udc->pdata->phy_init) { - retval = udc->pdata->phy_init(udc->phy_regs); - if (retval) { - dev_err(&udc->dev->dev, - "init phy error %d\n", retval); - udc_clock_disable(udc); - return retval; - } - } - udc->active = 1; - - return 0; -} - -static int mv_udc_enable(struct mv_udc *udc) -{ - if (udc->clock_gating) - return mv_udc_enable_internal(udc); - - return 0; -} - -static void mv_udc_disable_internal(struct mv_udc *udc) -{ - if (udc->active) { - dev_dbg(&udc->dev->dev, "disable udc\n"); - if (udc->pdata->phy_deinit) - udc->pdata->phy_deinit(udc->phy_regs); - udc_clock_disable(udc); - udc->active = 0; - } -} - -static void mv_udc_disable(struct mv_udc *udc) -{ - if (udc->clock_gating) - mv_udc_disable_internal(udc); -} - -static int mv_udc_get_frame(struct usb_gadget *gadget) -{ - struct mv_udc *udc; - u16 retval; - - if (!gadget) - return -ENODEV; - - udc = container_of(gadget, struct mv_udc, gadget); - - retval = readl(&udc->op_regs->frindex) & USB_FRINDEX_MASKS; - - return retval; -} - -/* Tries to wake up the host connected to this gadget */ -static int mv_udc_wakeup(struct usb_gadget *gadget) -{ - struct mv_udc *udc = container_of(gadget, struct mv_udc, gadget); - u32 portsc; - - /* Remote wakeup feature not enabled by host */ - if (!udc->remote_wakeup) - return -ENOTSUPP; - - portsc = readl(&udc->op_regs->portsc); - /* not suspended? */ - if (!(portsc & PORTSCX_PORT_SUSPEND)) - return 0; - /* trigger force resume */ - portsc |= PORTSCX_PORT_FORCE_RESUME; - writel(portsc, &udc->op_regs->portsc[0]); - return 0; -} - -static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) -{ - struct mv_udc *udc; - unsigned long flags; - int retval = 0; - - udc = container_of(gadget, struct mv_udc, gadget); - spin_lock_irqsave(&udc->lock, flags); - - udc->vbus_active = (is_active != 0); - - dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", - __func__, udc->softconnect, udc->vbus_active); - - if (udc->driver && udc->softconnect && udc->vbus_active) { - retval = mv_udc_enable(udc); - if (retval == 0) { - /* Clock is disabled, need re-init registers */ - udc_reset(udc); - ep0_reset(udc); - udc_start(udc); - } - } else if (udc->driver && udc->softconnect) { - if (!udc->active) - goto out; - - /* stop all the transfer in queue*/ - stop_activity(udc, udc->driver); - udc_stop(udc); - mv_udc_disable(udc); - } - -out: - spin_unlock_irqrestore(&udc->lock, flags); - return retval; -} - -static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) -{ - struct mv_udc *udc; - unsigned long flags; - int retval = 0; - - udc = container_of(gadget, struct mv_udc, gadget); - spin_lock_irqsave(&udc->lock, flags); - - udc->softconnect = (is_on != 0); - - dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", - __func__, udc->softconnect, udc->vbus_active); - - if (udc->driver && udc->softconnect && udc->vbus_active) { - retval = mv_udc_enable(udc); - if (retval == 0) { - /* Clock is disabled, need re-init registers */ - udc_reset(udc); - ep0_reset(udc); - udc_start(udc); - } - } else if (udc->driver && udc->vbus_active) { - /* stop all the transfer in queue*/ - stop_activity(udc, udc->driver); - udc_stop(udc); - mv_udc_disable(udc); - } - - spin_unlock_irqrestore(&udc->lock, flags); - return retval; -} - -static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *); -static int mv_udc_stop(struct usb_gadget *); -/* device controller usb_gadget_ops structure */ -static const struct usb_gadget_ops mv_ops = { - - /* returns the current frame number */ - .get_frame = mv_udc_get_frame, - - /* tries to wake up the host connected to this gadget */ - .wakeup = mv_udc_wakeup, - - /* notify controller that VBUS is powered or not */ - .vbus_session = mv_udc_vbus_session, - - /* D+ pullup, software-controlled connect/disconnect to USB host */ - .pullup = mv_udc_pullup, - .udc_start = mv_udc_start, - .udc_stop = mv_udc_stop, -}; - -static int eps_init(struct mv_udc *udc) -{ - struct mv_ep *ep; - char name[14]; - int i; - - /* initialize ep0 */ - ep = &udc->eps[0]; - ep->udc = udc; - strncpy(ep->name, "ep0", sizeof(ep->name)); - ep->ep.name = ep->name; - ep->ep.ops = &mv_ep_ops; - ep->wedge = 0; - ep->stopped = 0; - usb_ep_set_maxpacket_limit(&ep->ep, EP0_MAX_PKT_SIZE); - ep->ep.caps.type_control = true; - ep->ep.caps.dir_in = true; - ep->ep.caps.dir_out = true; - ep->ep_num = 0; - ep->ep.desc = &mv_ep0_desc; - INIT_LIST_HEAD(&ep->queue); - - ep->ep_type = USB_ENDPOINT_XFER_CONTROL; - - /* initialize other endpoints */ - for (i = 2; i < udc->max_eps * 2; i++) { - ep = &udc->eps[i]; - if (i % 2) { - snprintf(name, sizeof(name), "ep%din", i / 2); - ep->direction = EP_DIR_IN; - ep->ep.caps.dir_in = true; - } else { - snprintf(name, sizeof(name), "ep%dout", i / 2); - ep->direction = EP_DIR_OUT; - ep->ep.caps.dir_out = true; - } - ep->udc = udc; - strncpy(ep->name, name, sizeof(ep->name)); - ep->ep.name = ep->name; - - ep->ep.caps.type_iso = true; - ep->ep.caps.type_bulk = true; - ep->ep.caps.type_int = true; - - ep->ep.ops = &mv_ep_ops; - ep->stopped = 0; - usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0); - ep->ep_num = i / 2; - - INIT_LIST_HEAD(&ep->queue); - list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); - - ep->dqh = &udc->ep_dqh[i]; - } - - return 0; -} - -/* delete all endpoint requests, called with spinlock held */ -static void nuke(struct mv_ep *ep, int status) -{ - /* called with spinlock held */ - ep->stopped = 1; - - /* endpoint fifo flush */ - mv_ep_fifo_flush(&ep->ep); - - while (!list_empty(&ep->queue)) { - struct mv_req *req = NULL; - req = list_entry(ep->queue.next, struct mv_req, queue); - done(ep, req, status); - } -} - -static void gadget_reset(struct mv_udc *udc, struct usb_gadget_driver *driver) -{ - struct mv_ep *ep; - - nuke(&udc->eps[0], -ESHUTDOWN); - - list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - nuke(ep, -ESHUTDOWN); - } - - /* report reset; the driver is already quiesced */ - if (driver) { - spin_unlock(&udc->lock); - usb_gadget_udc_reset(&udc->gadget, driver); - spin_lock(&udc->lock); - } -} -/* stop all USB activities */ -static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver) -{ - struct mv_ep *ep; - - nuke(&udc->eps[0], -ESHUTDOWN); - - list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - nuke(ep, -ESHUTDOWN); - } - - /* report disconnect; the driver is already quiesced */ - if (driver) { - spin_unlock(&udc->lock); - driver->disconnect(&udc->gadget); - spin_lock(&udc->lock); - } -} - -static int mv_udc_start(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct mv_udc *udc; - int retval = 0; - unsigned long flags; - - udc = container_of(gadget, struct mv_udc, gadget); - - if (udc->driver) - return -EBUSY; - - spin_lock_irqsave(&udc->lock, flags); - - /* hook up the driver ... */ - udc->driver = driver; - - udc->usb_state = USB_STATE_ATTACHED; - udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = EP_DIR_OUT; - - spin_unlock_irqrestore(&udc->lock, flags); - - if (udc->transceiver) { - retval = otg_set_peripheral(udc->transceiver->otg, - &udc->gadget); - if (retval) { - dev_err(&udc->dev->dev, - "unable to register peripheral to otg\n"); - udc->driver = NULL; - return retval; - } - } - - /* When boot with cable attached, there will be no vbus irq occurred */ - if (udc->qwork) - queue_work(udc->qwork, &udc->vbus_work); - - return 0; -} - -static int mv_udc_stop(struct usb_gadget *gadget) -{ - struct mv_udc *udc; - unsigned long flags; - - udc = container_of(gadget, struct mv_udc, gadget); - - spin_lock_irqsave(&udc->lock, flags); - - mv_udc_enable(udc); - udc_stop(udc); - - /* stop all usb activities */ - udc->gadget.speed = USB_SPEED_UNKNOWN; - stop_activity(udc, NULL); - mv_udc_disable(udc); - - spin_unlock_irqrestore(&udc->lock, flags); - - /* unbind gadget driver */ - udc->driver = NULL; - - return 0; -} - -static void mv_set_ptc(struct mv_udc *udc, u32 mode) -{ - u32 portsc; - - portsc = readl(&udc->op_regs->portsc[0]); - portsc |= mode << 16; - writel(portsc, &udc->op_regs->portsc[0]); -} - -static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req) -{ - struct mv_ep *mvep = container_of(ep, struct mv_ep, ep); - struct mv_req *req = container_of(_req, struct mv_req, req); - struct mv_udc *udc; - unsigned long flags; - - udc = mvep->udc; - - dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode); - - spin_lock_irqsave(&udc->lock, flags); - if (req->test_mode) { - mv_set_ptc(udc, req->test_mode); - req->test_mode = 0; - } - spin_unlock_irqrestore(&udc->lock, flags); -} - -static int -udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) -{ - int retval = 0; - struct mv_req *req; - struct mv_ep *ep; - - ep = &udc->eps[0]; - udc->ep0_dir = direction; - udc->ep0_state = WAIT_FOR_OUT_STATUS; - - req = udc->status_req; - - /* fill in the request structure */ - if (empty == false) { - *((u16 *) req->req.buf) = cpu_to_le16(status); - req->req.length = 2; - } else - req->req.length = 0; - - req->ep = ep; - req->req.status = -EINPROGRESS; - req->req.actual = 0; - if (udc->test_mode) { - req->req.complete = prime_status_complete; - req->test_mode = udc->test_mode; - udc->test_mode = 0; - } else - req->req.complete = NULL; - req->dtd_count = 0; - - if (req->req.dma == DMA_ADDR_INVALID) { - req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, - req->req.buf, req->req.length, - ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - req->mapped = 1; - } - - /* prime the data phase */ - if (!req_to_dtd(req)) { - retval = queue_dtd(ep, req); - if (retval) { - dev_err(&udc->dev->dev, - "Failed to queue dtd when prime status\n"); - goto out; - } - } else{ /* no mem */ - retval = -ENOMEM; - dev_err(&udc->dev->dev, - "Failed to dma_pool_alloc when prime status\n"); - goto out; - } - - list_add_tail(&req->queue, &ep->queue); - - return 0; -out: - usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep)); - - return retval; -} - -static void mv_udc_testmode(struct mv_udc *udc, u16 index) -{ - if (index <= USB_TEST_FORCE_ENABLE) { - udc->test_mode = index; - if (udc_prime_status(udc, EP_DIR_IN, 0, true)) - ep0_stall(udc); - } else - dev_err(&udc->dev->dev, - "This test mode(%d) is not supported\n", index); -} - -static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) -{ - udc->dev_addr = (u8)setup->wValue; - - /* update usb state */ - udc->usb_state = USB_STATE_ADDRESS; - - if (udc_prime_status(udc, EP_DIR_IN, 0, true)) - ep0_stall(udc); -} - -static void ch9getstatus(struct mv_udc *udc, u8 ep_num, - struct usb_ctrlrequest *setup) -{ - u16 status = 0; - int retval; - - if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) - != (USB_DIR_IN | USB_TYPE_STANDARD)) - return; - - if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { - status = 1 << USB_DEVICE_SELF_POWERED; - status |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; - } else if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_INTERFACE) { - /* get interface status */ - status = 0; - } else if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_ENDPOINT) { - u8 ep_num, direction; - - ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK; - direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK) - ? EP_DIR_IN : EP_DIR_OUT; - status = ep_is_stall(udc, ep_num, direction) - << USB_ENDPOINT_HALT; - } - - retval = udc_prime_status(udc, EP_DIR_IN, status, false); - if (retval) - ep0_stall(udc); - else - udc->ep0_state = DATA_STATE_XMIT; -} - -static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) -{ - u8 ep_num; - u8 direction; - struct mv_ep *ep; - - if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) - == ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) { - switch (setup->wValue) { - case USB_DEVICE_REMOTE_WAKEUP: - udc->remote_wakeup = 0; - break; - default: - goto out; - } - } else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) - == ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) { - switch (setup->wValue) { - case USB_ENDPOINT_HALT: - ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK; - direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK) - ? EP_DIR_IN : EP_DIR_OUT; - if (setup->wValue != 0 || setup->wLength != 0 - || ep_num > udc->max_eps) - goto out; - ep = &udc->eps[ep_num * 2 + direction]; - if (ep->wedge == 1) - break; - spin_unlock(&udc->lock); - ep_set_stall(udc, ep_num, direction, 0); - spin_lock(&udc->lock); - break; - default: - goto out; - } - } else - goto out; - - if (udc_prime_status(udc, EP_DIR_IN, 0, true)) - ep0_stall(udc); -out: - return; -} - -static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) -{ - u8 ep_num; - u8 direction; - - if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) - == ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) { - switch (setup->wValue) { - case USB_DEVICE_REMOTE_WAKEUP: - udc->remote_wakeup = 1; - break; - case USB_DEVICE_TEST_MODE: - if (setup->wIndex & 0xFF - || udc->gadget.speed != USB_SPEED_HIGH) - ep0_stall(udc); - - if (udc->usb_state != USB_STATE_CONFIGURED - && udc->usb_state != USB_STATE_ADDRESS - && udc->usb_state != USB_STATE_DEFAULT) - ep0_stall(udc); - - mv_udc_testmode(udc, (setup->wIndex >> 8)); - goto out; - default: - goto out; - } - } else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK)) - == ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) { - switch (setup->wValue) { - case USB_ENDPOINT_HALT: - ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK; - direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK) - ? EP_DIR_IN : EP_DIR_OUT; - if (setup->wValue != 0 || setup->wLength != 0 - || ep_num > udc->max_eps) - goto out; - spin_unlock(&udc->lock); - ep_set_stall(udc, ep_num, direction, 1); - spin_lock(&udc->lock); - break; - default: - goto out; - } - } else - goto out; - - if (udc_prime_status(udc, EP_DIR_IN, 0, true)) - ep0_stall(udc); -out: - return; -} - -static void handle_setup_packet(struct mv_udc *udc, u8 ep_num, - struct usb_ctrlrequest *setup) - __releases(&ep->udc->lock) - __acquires(&ep->udc->lock) -{ - bool delegate = false; - - nuke(&udc->eps[ep_num * 2 + EP_DIR_OUT], -ESHUTDOWN); - - dev_dbg(&udc->dev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", - setup->bRequestType, setup->bRequest, - setup->wValue, setup->wIndex, setup->wLength); - /* We process some standard setup requests here */ - if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { - switch (setup->bRequest) { - case USB_REQ_GET_STATUS: - ch9getstatus(udc, ep_num, setup); - break; - - case USB_REQ_SET_ADDRESS: - ch9setaddress(udc, setup); - break; - - case USB_REQ_CLEAR_FEATURE: - ch9clearfeature(udc, setup); - break; - - case USB_REQ_SET_FEATURE: - ch9setfeature(udc, setup); - break; - - default: - delegate = true; - } - } else - delegate = true; - - /* delegate USB standard requests to the gadget driver */ - if (delegate == true) { - /* USB requests handled by gadget */ - if (setup->wLength) { - /* DATA phase from gadget, STATUS phase from udc */ - udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) - ? EP_DIR_IN : EP_DIR_OUT; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0_stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = (setup->bRequestType & USB_DIR_IN) - ? DATA_STATE_XMIT : DATA_STATE_RECV; - } else { - /* no DATA phase, IN STATUS phase from gadget */ - udc->ep0_dir = EP_DIR_IN; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0_stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = WAIT_FOR_OUT_STATUS; - } - } -} - -/* complete DATA or STATUS phase of ep0 prime status phase if needed */ -static void ep0_req_complete(struct mv_udc *udc, - struct mv_ep *ep0, struct mv_req *req) -{ - u32 new_addr; - - if (udc->usb_state == USB_STATE_ADDRESS) { - /* set the new address */ - new_addr = (u32)udc->dev_addr; - writel(new_addr << USB_DEVICE_ADDRESS_BIT_SHIFT, - &udc->op_regs->deviceaddr); - } - - done(ep0, req, 0); - - switch (udc->ep0_state) { - case DATA_STATE_XMIT: - /* receive status phase */ - if (udc_prime_status(udc, EP_DIR_OUT, 0, true)) - ep0_stall(udc); - break; - case DATA_STATE_RECV: - /* send status phase */ - if (udc_prime_status(udc, EP_DIR_IN, 0 , true)) - ep0_stall(udc); - break; - case WAIT_FOR_OUT_STATUS: - udc->ep0_state = WAIT_FOR_SETUP; - break; - case WAIT_FOR_SETUP: - dev_err(&udc->dev->dev, "unexpect ep0 packets\n"); - break; - default: - ep0_stall(udc); - break; - } -} - -static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr) -{ - u32 temp; - struct mv_dqh *dqh; - - dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT]; - - /* Clear bit in ENDPTSETUPSTAT */ - writel((1 << ep_num), &udc->op_regs->epsetupstat); - - /* while a hazard exists when setup package arrives */ - do { - /* Set Setup Tripwire */ - temp = readl(&udc->op_regs->usbcmd); - writel(temp | USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd); - - /* Copy the setup packet to local buffer */ - memcpy(buffer_ptr, (u8 *) dqh->setup_buffer, 8); - } while (!(readl(&udc->op_regs->usbcmd) & USBCMD_SETUP_TRIPWIRE_SET)); - - /* Clear Setup Tripwire */ - temp = readl(&udc->op_regs->usbcmd); - writel(temp & ~USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd); -} - -static void irq_process_tr_complete(struct mv_udc *udc) -{ - u32 tmp, bit_pos; - int i, ep_num = 0, direction = 0; - struct mv_ep *curr_ep; - struct mv_req *curr_req, *temp_req; - int status; - - /* - * We use separate loops for ENDPTSETUPSTAT and ENDPTCOMPLETE - * because the setup packets are to be read ASAP - */ - - /* Process all Setup packet received interrupts */ - tmp = readl(&udc->op_regs->epsetupstat); - - if (tmp) { - for (i = 0; i < udc->max_eps; i++) { - if (tmp & (1 << i)) { - get_setup_data(udc, i, - (u8 *)(&udc->local_setup_buff)); - handle_setup_packet(udc, i, - &udc->local_setup_buff); - } - } - } - - /* Don't clear the endpoint setup status register here. - * It is cleared as a setup packet is read out of the buffer - */ - - /* Process non-setup transaction complete interrupts */ - tmp = readl(&udc->op_regs->epcomplete); - - if (!tmp) - return; - - writel(tmp, &udc->op_regs->epcomplete); - - for (i = 0; i < udc->max_eps * 2; i++) { - ep_num = i >> 1; - direction = i % 2; - - bit_pos = 1 << (ep_num + 16 * direction); - - if (!(bit_pos & tmp)) - continue; - - if (i == 1) - curr_ep = &udc->eps[0]; - else - curr_ep = &udc->eps[i]; - /* process the req queue until an uncomplete request */ - list_for_each_entry_safe(curr_req, temp_req, - &curr_ep->queue, queue) { - status = process_ep_req(udc, i, curr_req); - if (status) - break; - - /* write back status to req */ - curr_req->req.status = status; - - /* ep0 request completion */ - if (ep_num == 0) { - ep0_req_complete(udc, curr_ep, curr_req); - break; - } else { - done(curr_ep, curr_req, status); - } - } - } -} - -static void irq_process_reset(struct mv_udc *udc) -{ - u32 tmp; - unsigned int loops; - - udc->ep0_dir = EP_DIR_OUT; - udc->ep0_state = WAIT_FOR_SETUP; - udc->remote_wakeup = 0; /* default to 0 on reset */ - - /* The address bits are past bit 25-31. Set the address */ - tmp = readl(&udc->op_regs->deviceaddr); - tmp &= ~(USB_DEVICE_ADDRESS_MASK); - writel(tmp, &udc->op_regs->deviceaddr); - - /* Clear all the setup token semaphores */ - tmp = readl(&udc->op_regs->epsetupstat); - writel(tmp, &udc->op_regs->epsetupstat); - - /* Clear all the endpoint complete status bits */ - tmp = readl(&udc->op_regs->epcomplete); - writel(tmp, &udc->op_regs->epcomplete); - - /* wait until all endptprime bits cleared */ - loops = LOOPS(PRIME_TIMEOUT); - while (readl(&udc->op_regs->epprime) & 0xFFFFFFFF) { - if (loops == 0) { - dev_err(&udc->dev->dev, - "Timeout for ENDPTPRIME = 0x%x\n", - readl(&udc->op_regs->epprime)); - break; - } - loops--; - udelay(LOOPS_USEC); - } - - /* Write 1s to the Flush register */ - writel((u32)~0, &udc->op_regs->epflush); - - if (readl(&udc->op_regs->portsc[0]) & PORTSCX_PORT_RESET) { - dev_info(&udc->dev->dev, "usb bus reset\n"); - udc->usb_state = USB_STATE_DEFAULT; - /* reset all the queues, stop all USB activities */ - gadget_reset(udc, udc->driver); - } else { - dev_info(&udc->dev->dev, "USB reset portsc 0x%x\n", - readl(&udc->op_regs->portsc)); - - /* - * re-initialize - * controller reset - */ - udc_reset(udc); - - /* reset all the queues, stop all USB activities */ - stop_activity(udc, udc->driver); - - /* reset ep0 dQH and endptctrl */ - ep0_reset(udc); - - /* enable interrupt and set controller to run state */ - udc_start(udc); - - udc->usb_state = USB_STATE_ATTACHED; - } -} - -static void handle_bus_resume(struct mv_udc *udc) -{ - udc->usb_state = udc->resume_state; - udc->resume_state = 0; - - /* report resume to the driver */ - if (udc->driver) { - if (udc->driver->resume) { - spin_unlock(&udc->lock); - udc->driver->resume(&udc->gadget); - spin_lock(&udc->lock); - } - } -} - -static void irq_process_suspend(struct mv_udc *udc) -{ - udc->resume_state = udc->usb_state; - udc->usb_state = USB_STATE_SUSPENDED; - - if (udc->driver->suspend) { - spin_unlock(&udc->lock); - udc->driver->suspend(&udc->gadget); - spin_lock(&udc->lock); - } -} - -static void irq_process_port_change(struct mv_udc *udc) -{ - u32 portsc; - - portsc = readl(&udc->op_regs->portsc[0]); - if (!(portsc & PORTSCX_PORT_RESET)) { - /* Get the speed */ - u32 speed = portsc & PORTSCX_PORT_SPEED_MASK; - switch (speed) { - case PORTSCX_PORT_SPEED_HIGH: - udc->gadget.speed = USB_SPEED_HIGH; - break; - case PORTSCX_PORT_SPEED_FULL: - udc->gadget.speed = USB_SPEED_FULL; - break; - case PORTSCX_PORT_SPEED_LOW: - udc->gadget.speed = USB_SPEED_LOW; - break; - default: - udc->gadget.speed = USB_SPEED_UNKNOWN; - break; - } - } - - if (portsc & PORTSCX_PORT_SUSPEND) { - udc->resume_state = udc->usb_state; - udc->usb_state = USB_STATE_SUSPENDED; - if (udc->driver->suspend) { - spin_unlock(&udc->lock); - udc->driver->suspend(&udc->gadget); - spin_lock(&udc->lock); - } - } - - if (!(portsc & PORTSCX_PORT_SUSPEND) - && udc->usb_state == USB_STATE_SUSPENDED) { - handle_bus_resume(udc); - } - - if (!udc->resume_state) - udc->usb_state = USB_STATE_DEFAULT; -} - -static void irq_process_error(struct mv_udc *udc) -{ - /* Increment the error count */ - udc->errors++; -} - -static irqreturn_t mv_udc_irq(int irq, void *dev) -{ - struct mv_udc *udc = (struct mv_udc *)dev; - u32 status, intr; - - /* Disable ISR when stopped bit is set */ - if (udc->stopped) - return IRQ_NONE; - - spin_lock(&udc->lock); - - status = readl(&udc->op_regs->usbsts); - intr = readl(&udc->op_regs->usbintr); - status &= intr; - - if (status == 0) { - spin_unlock(&udc->lock); - return IRQ_NONE; - } - - /* Clear all the interrupts occurred */ - writel(status, &udc->op_regs->usbsts); - - if (status & USBSTS_ERR) - irq_process_error(udc); - - if (status & USBSTS_RESET) - irq_process_reset(udc); - - if (status & USBSTS_PORT_CHANGE) - irq_process_port_change(udc); - - if (status & USBSTS_INT) - irq_process_tr_complete(udc); - - if (status & USBSTS_SUSPEND) - irq_process_suspend(udc); - - spin_unlock(&udc->lock); - - return IRQ_HANDLED; -} - -static irqreturn_t mv_udc_vbus_irq(int irq, void *dev) -{ - struct mv_udc *udc = (struct mv_udc *)dev; - - /* polling VBUS and init phy may cause too much time*/ - if (udc->qwork) - queue_work(udc->qwork, &udc->vbus_work); - - return IRQ_HANDLED; -} - -static void mv_udc_vbus_work(struct work_struct *work) -{ - struct mv_udc *udc; - unsigned int vbus; - - udc = container_of(work, struct mv_udc, vbus_work); - if (!udc->pdata->vbus) - return; - - vbus = udc->pdata->vbus->poll(); - dev_info(&udc->dev->dev, "vbus is %d\n", vbus); - - if (vbus == VBUS_HIGH) - mv_udc_vbus_session(&udc->gadget, 1); - else if (vbus == VBUS_LOW) - mv_udc_vbus_session(&udc->gadget, 0); -} - -/* release device structure */ -static void gadget_release(struct device *_dev) -{ - struct mv_udc *udc; - - udc = dev_get_drvdata(_dev); - - complete(udc->done); -} - -static void mv_udc_remove(struct platform_device *pdev) -{ - struct mv_udc *udc; - - udc = platform_get_drvdata(pdev); - - usb_del_gadget_udc(&udc->gadget); - - if (udc->qwork) - destroy_workqueue(udc->qwork); - - /* free memory allocated in probe */ - dma_pool_destroy(udc->dtd_pool); - - if (udc->ep_dqh) - dma_free_coherent(&pdev->dev, udc->ep_dqh_size, - udc->ep_dqh, udc->ep_dqh_dma); - - mv_udc_disable(udc); - - /* free dev, wait for the release() finished */ - wait_for_completion(udc->done); -} - -static int mv_udc_probe(struct platform_device *pdev) -{ - struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct mv_udc *udc; - int retval = 0; - struct resource *r; - size_t size; - - if (pdata == NULL) { - dev_err(&pdev->dev, "missing platform_data\n"); - return -ENODEV; - } - - udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); - if (udc == NULL) - return -ENOMEM; - - udc->done = &release_done; - udc->pdata = dev_get_platdata(&pdev->dev); - spin_lock_init(&udc->lock); - - udc->dev = pdev; - - if (pdata->mode == MV_USB_MODE_OTG) { - udc->transceiver = devm_usb_get_phy(&pdev->dev, - USB_PHY_TYPE_USB2); - if (IS_ERR(udc->transceiver)) { - retval = PTR_ERR(udc->transceiver); - - if (retval == -ENXIO) - return retval; - - udc->transceiver = NULL; - return -EPROBE_DEFER; - } - } - - /* udc only have one sysclk. */ - udc->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(udc->clk)) - return PTR_ERR(udc->clk); - - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); - if (r == NULL) { - dev_err(&pdev->dev, "no I/O memory resource defined\n"); - return -ENODEV; - } - - udc->cap_regs = (struct mv_cap_regs __iomem *) - devm_ioremap(&pdev->dev, r->start, resource_size(r)); - if (udc->cap_regs == NULL) { - dev_err(&pdev->dev, "failed to map I/O memory\n"); - return -EBUSY; - } - - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); - if (r == NULL) { - dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); - return -ENODEV; - } - - udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); - if (udc->phy_regs == NULL) { - dev_err(&pdev->dev, "failed to map phy I/O memory\n"); - return -EBUSY; - } - - /* we will acces controller register, so enable the clk */ - retval = mv_udc_enable_internal(udc); - if (retval) - return retval; - - udc->op_regs = - (struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs - + (readl(&udc->cap_regs->caplength_hciversion) - & CAPLENGTH_MASK)); - udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK; - - /* - * some platform will use usb to download image, it may not disconnect - * usb gadget before loading kernel. So first stop udc here. - */ - udc_stop(udc); - writel(0xFFFFFFFF, &udc->op_regs->usbsts); - - size = udc->max_eps * sizeof(struct mv_dqh) *2; - size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1); - udc->ep_dqh = dma_alloc_coherent(&pdev->dev, size, - &udc->ep_dqh_dma, GFP_KERNEL); - - if (udc->ep_dqh == NULL) { - dev_err(&pdev->dev, "allocate dQH memory failed\n"); - retval = -ENOMEM; - goto err_disable_clock; - } - udc->ep_dqh_size = size; - - /* create dTD dma_pool resource */ - udc->dtd_pool = dma_pool_create("mv_dtd", - &pdev->dev, - sizeof(struct mv_dtd), - DTD_ALIGNMENT, - DMA_BOUNDARY); - - if (!udc->dtd_pool) { - retval = -ENOMEM; - goto err_free_dma; - } - - size = udc->max_eps * sizeof(struct mv_ep) *2; - udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (udc->eps == NULL) { - retval = -ENOMEM; - goto err_destroy_dma; - } - - /* initialize ep0 status request structure */ - udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req), - GFP_KERNEL); - if (!udc->status_req) { - retval = -ENOMEM; - goto err_destroy_dma; - } - INIT_LIST_HEAD(&udc->status_req->queue); - - /* allocate a small amount of memory to get valid address */ - udc->status_req->req.buf = devm_kzalloc(&pdev->dev, 8, GFP_KERNEL); - if (!udc->status_req->req.buf) { - retval = -ENOMEM; - goto err_destroy_dma; - } - udc->status_req->req.dma = DMA_ADDR_INVALID; - - udc->resume_state = USB_STATE_NOTATTACHED; - udc->usb_state = USB_STATE_POWERED; - udc->ep0_dir = EP_DIR_OUT; - udc->remote_wakeup = 0; - - r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - retval = -ENODEV; - goto err_destroy_dma; - } - udc->irq = r->start; - if (devm_request_irq(&pdev->dev, udc->irq, mv_udc_irq, - IRQF_SHARED, driver_name, udc)) { - dev_err(&pdev->dev, "Request irq %d for UDC failed\n", - udc->irq); - retval = -ENODEV; - goto err_destroy_dma; - } - - /* initialize gadget structure */ - udc->gadget.ops = &mv_ops; /* usb_gadget_ops */ - udc->gadget.ep0 = &udc->eps[0].ep; /* gadget ep0 */ - INIT_LIST_HEAD(&udc->gadget.ep_list); /* ep_list */ - udc->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ - udc->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ - - /* the "gadget" abstracts/virtualizes the controller */ - udc->gadget.name = driver_name; /* gadget name */ - - eps_init(udc); - - /* VBUS detect: we can disable/enable clock on demand.*/ - if (udc->transceiver) - udc->clock_gating = 1; - else if (pdata->vbus) { - udc->clock_gating = 1; - retval = devm_request_threaded_irq(&pdev->dev, - pdata->vbus->irq, NULL, - mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc); - if (retval) { - dev_info(&pdev->dev, - "Can not request irq for VBUS, " - "disable clock gating\n"); - udc->clock_gating = 0; - } - - udc->qwork = create_singlethread_workqueue("mv_udc_queue"); - if (!udc->qwork) { - dev_err(&pdev->dev, "cannot create workqueue\n"); - retval = -ENOMEM; - goto err_destroy_dma; - } - - INIT_WORK(&udc->vbus_work, mv_udc_vbus_work); - } - - /* - * When clock gating is supported, we can disable clk and phy. - * If not, it means that VBUS detection is not supported, we - * have to enable vbus active all the time to let controller work. - */ - if (udc->clock_gating) - mv_udc_disable_internal(udc); - else - udc->vbus_active = 1; - - retval = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, - gadget_release); - if (retval) - goto err_create_workqueue; - - platform_set_drvdata(pdev, udc); - dev_info(&pdev->dev, "successful probe UDC device %s clock gating.\n", - udc->clock_gating ? "with" : "without"); - - return 0; - -err_create_workqueue: - if (udc->qwork) - destroy_workqueue(udc->qwork); -err_destroy_dma: - dma_pool_destroy(udc->dtd_pool); -err_free_dma: - dma_free_coherent(&pdev->dev, udc->ep_dqh_size, - udc->ep_dqh, udc->ep_dqh_dma); -err_disable_clock: - mv_udc_disable_internal(udc); - - return retval; -} - -#ifdef CONFIG_PM -static int mv_udc_suspend(struct device *dev) -{ - struct mv_udc *udc; - - udc = dev_get_drvdata(dev); - - /* if OTG is enabled, the following will be done in OTG driver*/ - if (udc->transceiver) - return 0; - - if (udc->pdata->vbus && udc->pdata->vbus->poll) - if (udc->pdata->vbus->poll() == VBUS_HIGH) { - dev_info(&udc->dev->dev, "USB cable is connected!\n"); - return -EAGAIN; - } - - /* - * only cable is unplugged, udc can suspend. - * So do not care about clock_gating == 1. - */ - if (!udc->clock_gating) { - udc_stop(udc); - - spin_lock_irq(&udc->lock); - /* stop all usb activities */ - stop_activity(udc, udc->driver); - spin_unlock_irq(&udc->lock); - - mv_udc_disable_internal(udc); - } - - return 0; -} - -static int mv_udc_resume(struct device *dev) -{ - struct mv_udc *udc; - int retval; - - udc = dev_get_drvdata(dev); - - /* if OTG is enabled, the following will be done in OTG driver*/ - if (udc->transceiver) - return 0; - - if (!udc->clock_gating) { - retval = mv_udc_enable_internal(udc); - if (retval) - return retval; - - if (udc->driver && udc->softconnect) { - udc_reset(udc); - ep0_reset(udc); - udc_start(udc); - } - } - - return 0; -} - -static const struct dev_pm_ops mv_udc_pm_ops = { - .suspend = mv_udc_suspend, - .resume = mv_udc_resume, -}; -#endif - -static void mv_udc_shutdown(struct platform_device *pdev) -{ - struct mv_udc *udc; - u32 mode; - - udc = platform_get_drvdata(pdev); - /* reset controller mode to IDLE */ - mv_udc_enable(udc); - mode = readl(&udc->op_regs->usbmode); - mode &= ~3; - writel(mode, &udc->op_regs->usbmode); - mv_udc_disable(udc); -} - -static struct platform_driver udc_driver = { - .probe = mv_udc_probe, - .remove = mv_udc_remove, - .shutdown = mv_udc_shutdown, - .driver = { - .name = "mv-udc", -#ifdef CONFIG_PM - .pm = &mv_udc_pm_ops, -#endif - }, -}; - -module_platform_driver(udc_driver); -MODULE_ALIAS("platform:mv-udc"); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>"); -MODULE_LICENSE("GPL"); |