| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull input updates from Dmitry Torokhov:
- support for game controllers requiring delayed initialization
packets, such as ByoWave Proteus, in xpad driver
- a change to atkbd driver to not reset the keyboard on Loongson
devices
- tweaks to gpio-keys and matrix_keypad drivers
- fixes to documentation for Amiga joysticks
- a fix to ims-pcu driver to better handle malformed firmware
* tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - check record size in ims_pcu_flash_firmware()
Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer()
Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT
Input: amijoy - make headings compliant w/ guidelines in documentation
Input: amijoy - fix grammar in documentation
Input: amijoy - fix Amiga 4-joystick adapter pinout in documentation
Input: amijoy - fix broken table formatting in documentation
Input: atkbd - do not reset keyboard by default on Loongson
Input: xpad - send LED and auth done packets to all Xbox One controllers
Input: xpad - add the ByoWave Proteus controller
Input: xpad - allow delaying init packets
MAINTAINERS: update dlg,da72??.txt to yaml
dt-bindings: input: convert dlg,da7280.txt to dt-schema
dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties
Input: snvs_pwrkey - support power-off-time-sec
dt-bindings: crypto: fsl,sec-v4.0-mon: Add "power-off-time-sec"
Input: matrix_keypad - detect change during scan
Input: matrix_keypad - add function for reading row state
|
|
Pull MTD updates from Miquel Raynal:
"A big core MTD change is the introduction of a new class to always
register a master device. This is a problem that has been there
forever: the "master" device was not always present depending on a
number of heuristics such as the presence of fixed partitions and the
absence of a Kconfig symbol to force its presence. This was a problem
for runtime PM operations which might not have the "master" device
available in all situation.
The SPI NAND subsystem has seen the introduction of DTR operations
(the equivalent of DDR transfers), which involved quite a few
preparation patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for
old legacy SoCs with an update of the ->exec_op() hook, there has been
the introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion"
* tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (42 commits)
mtd: rawnand: brcmnand: legacy exec_op implementation
mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk
mtd: nand: brcmnand: fix NAND timeout when accessing eMMC
mtd: nand: sunxi: Add randomizer configuration before randomizer enable
mtd: spinand: esmt: fix id code for F50D1G41LB
mtd: rawnand: brcmnand: remove unused parameters
mtd: core: always create master device
mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()
mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()
mtd: rawnand: qcom: Fix read len for onfi param page
mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base
dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller
mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd()
mtd: rawnand: Use non-hybrid PCI devres API
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips
mtd: spinand: winbond: Add octal support
mtd: spinand: winbond: Add support for W35N01JW in single mode
mtd: spinand: winbond: Rename DTR variants
...
|
|
Pull rpmsg updates from Bjorn Andersson:
- Remove some dead and unused code from core and virtio modules
- Improve the error messages from the Qualcomm SMD driver and
initialize an uninitialized variable in the send path
* tag 'rpmsg-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send()
rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge
rpmsg: Remove unused method pointers *send_offchannel
rpmsg: virtio: Remove uncallable offchannel functions
rpmsg: core: Remove deadcode
|
|
Pull remoteproc updates from Bjorn Andersson:
- Fix resource cleanup in the remoteproc attach error handling code
paths
- Refactor the various TI K3 drivers to extract and reuse common code
between them
- Add support in the i.MX remoteproc driver for determining from the
firmware if Linux should wait on a "firmware ready" signal at startup
- Improve the Xilinx R5F power down mechanism to handle use cases where
this is shared with other entities in the system
* tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (46 commits)
remoteproc: k3: Refactor release_tsp() functions into common driver
remoteproc: k3: Refactor reserved_mem_init() functions into common driver
remoteproc: k3: Refactor mem_release() functions into common driver
remoteproc: k3: Refactor of_get_memories() functions into common driver
remoteproc: k3: Refactor .da_to_va rproc ops into common driver
remoteproc: k3: Refactor .get_loaded_rsc_table ops into common driver
remoteproc: k3: Refactor .detach rproc ops into common driver
remoteproc: k3: Refactor .attach rproc ops into common driver
remoteproc: k3: Refactor .stop rproc ops into common driver
remoteproc: k3: Refactor .start rproc ops into common driver
remoteproc: k3: Refactor .unprepare rproc ops into common driver
remoteproc: k3: Refactor .prepare rproc ops into common driver
remoteproc: k3-dsp: Assert local reset during .prepare callback
remoteproc: k3-dsp: Don't override rproc ops in IPC-only mode
remoteproc: k3: Refactor rproc_request_mbox() implementations into common driver
remoteproc: k3-m4: Ping the mbox while acquiring the channel
remoteproc: k3: Refactor rproc_release() implementation into common driver
remoteproc: k3-m4: Introduce central function to release rproc from reset
remoteproc: k3-dsp: Correct Reset deassert logic for devices w/o lresets
remoteproc: k3: Refactor rproc_reset() implementation into common driver
...
|
|
Pull mailbox updates from Jassi Brar:
"Core:
- misc cleanup
sophgo:
- add driver for CV18XX series
qcom:
- add SM7150 APCS compatible
- apcs: added separate clock node
imx:
- fix tx doorbell send
microchip:
- misc compile option fix
mediatek:
- Refine GCE_GCTL_VALUE setting"
* tag 'mailbox-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: qcom-apcs-ipc: Assign OF node to clock controller child device
dt-bindings: mailbox: qcom,apcs: Add separate node for clock-controller
dt-bindings: mailbox: qcom: Add the SM7150 APCS compatible
mailbox: sophgo: add mailbox driver for CV18XX series SoC
dt-bindings: mailbox: add Sophgo CV18XX series SoC
mailbox: Use guard/scoped_guard for spinlock
mailbox: Use guard/scoped_guard for con_mutex
mailbox: Remove devm_mbox_controller_unregister
mailbox: Propagate correct error return value
mailbox: Not protect module_put with spin_lock_irqsave
mailbox: Use dev_err when there is error
mailbox: mtk-cmdq: Refine GCE_GCTL_VALUE setting
mailbox: imx: Fix TXDB_V2 sending
mailbox: mchp-ipc-sbi: Fix COMPILE_TEST build error
|
|
The SPI NAND subsystem has seen the introduction of DTR operations (the
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Aside from this, there is the usual load of misc improvement and fixes.
|
|
Fix a shortcoming in the bindings that doesn't allow for a separate
external clock.
The AXI PWMGEN IP block has a compile option ASYNC_CLK_EN that allows
the use of an external clock for the PWM output separate from the AXI
clock that runs the peripheral.
This was missed in the original bindings and so users were writing dts
files where the one and only clock specified would be the external
clock, if there was one, incorrectly missing the separate AXI clock.
The correct bindings are that the AXI clock is always required and the
external clock is optional (must be given only when HDL compile option
ASYNC_CLK_EN=1).
Fixes: 1edf2c2a2841 ("dt-bindings: pwm: Add AXI PWM generator")
Cc: stable@vger.kernel.org
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250529-pwm-axi-pwmgen-add-external-clock-v3-2-5d8809a7da91@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
As the message of the commit 09e6b306f3ba ("arm64: cpufeature: discover
CPU support for MPAM") already states, if a buggy firmware fails to
either enable MPAM or emulate the trap as if it were disabled, the
kernel will just fail to boot. While upgrading the firmware should be
the best solution, we have some hardware of which the vendor have made
no response 2 months after we requested a firmware update. Allow
overriding it so our devices don't become some e-waste.
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Mingcong Bai <jeffbai@aosc.io>
Cc: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250602043723.216338-1-xry111@xry111.site
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The external crystal can be a second clock input. It is needed for the
SCMP counting method which allows using crystals different than 32768Hz.
It is also needed for an upcoming SoC which only supports the SCMP
method.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250526095801.35781-6-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog timer for the NXP S32 platform
- Add driver for Intel OC WDT
- Add exynos990-wdt
- Various other fixes and improvements
* tag 'linux-watchdog-6.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
watchdog: iTCO_wdt: Update the heartbeat value after clamping timeout
watchdog: Add driver for Intel OC WDT
watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT
watchdog: iTCO: Drop driver-internal locking
watchdog: apple: set max_hw_heartbeat_ms instead of max_timeout
watchdog: qcom: introduce the device data for IPQ5424 watchdog device
dt-bindings: watchdog: renesas,wdt: Document RZ/V2N (R9A09G056) support
watchdog: lenovo_se30_wdt: Fix possible devm_ioremap() NULL pointer dereference in lenovo_se30_wdt_probe()
watchdog: s3c2410_wdt: Add exynos990-wdt compatible data
dt-bindings: watchdog: samsung-wdt: Add exynos990-wdt compatible
dt-bindings: watchdog: Add rk3562 compatible
dt-bindings: watchdog: fsl,scu-wdt: Document imx8qm
watchdog: Add the Watchdog Timer for the NXP S32 platform
dt-bindings: watchdog: Add NXP Software Watchdog Timer
watchdog: Correct kerneldoc warnings
watchdog: stm32: Fix wakeup source leaks on device unbind
watchdog: Do not enable by default during compile testing
watchdog: cros-ec: Avoid -Wflex-array-member-not-at-end warning
watchdog: da9052_wdt: respect TWDMIN
watchdog: da9052_wdt: do not disable wdt during probe
...
|
|
Pull i3c updates from Alexandre Belloni:
"There is not much this this, mostly fixes around interrupt and IBI
handling:
- mipi-i3c-hci: interrupt handling fixes
- svc: i.MX94 and i.MX95 support, IBI handling fixes"
* tag 'i3c/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: controllers do not need to depend on I3C
i3c: master: svc: switch to bulk clk API for flexible clock support
dt-bindings: i3c: silvaco,i3c-master: add i.MX94 and i.MX95 I3C
i3c: master: svc: skip address resend on repeat START
i3c: master: svc: Emit STOP asap in the IBI transaction
i3c: master: svc: Receive IBI requests in interrupt context
i3c: mipi-i3c-hci: Move unexpected INTR_STATUS print before IO handler
i3c: mipi-i3c-hci: Change name of INTR_STATUS bit 11
i3c: mipi-i3c-hci: Clear INTR_STATUS unconditionally
i3c: mipi-i3c-hci: Fix handling status of i3c_hci_irq_handler()
i3c: mipi-i3c-hci: Allow only relevant INTR_STATUS bit updates
|
|
Pull OpenRISC updates from Stafford Horne:
"Just a few documentation updates from the community:
- Device tree documentation conversion from txt to yaml
- Documentation addition to help users getting started with initramfs
on OpenRISC
* tag 'for-linus' of https://github.com/openrisc/linux:
dt-bindings: interrupt-controller: Convert openrisc,ompic to DT schema
dt-bindings: interrupt-controller: Convert opencores,or1k-pic to DT schema
Documentation:openrisc: Add build instructions with initramfs
|
|
Document support for the watchdog IP found on the Renesas RZ/V2N
(R9A09G056) SoC. The watchdog IP is identical to that on RZ/V2H(P),
so `renesas,r9a09g057-wdt` will be used as a fallback compatible,
enabling reuse of the existing driver without changes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250502120054.47323-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add a dt-binding compatible for the Exynos990 Watchdog timer.
This watchdog is compatible with the GS101/Exynos850 design, as
such it requires the cluster-index and syscon-phandle properties
to be present. It also contains a cl2 cluster, as such the
cluster-index property has been expanded.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250420-wdt-resends-april-v1-1-f58639673959@mentallysanemainliners.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On systems with NUMA balancing enabled, it has been found that tracking
task activities resulting from NUMA balancing is beneficial. NUMA
balancing employs two mechanisms for task migration: one is to migrate
a task to an idle CPU within its preferred node, and the other is to
swap tasks located on different nodes when they are on each other's
preferred nodes.
The kernel already provides NUMA page migration statistics in
/sys/fs/cgroup/mytest/memory.stat and /proc/{PID}/sched. However, it
lacks statistics regarding task migration and swapping. Therefore,
relevant counts for task migration and swapping should be added.
The following two new fields:
numa_task_migrated
numa_task_swapped
will be shown in /sys/fs/cgroup/{GROUP}/memory.stat, /proc/{PID}/sched
and /proc/vmstat.
Introducing both per-task and per-memory cgroup (memcg) NUMA balancing
statistics facilitates a rapid evaluation of the performance and
resource utilization of the target workload. For instance, users can
first identify the container with high NUMA balancing activity and then
further pinpoint a specific task within that group, and subsequently
adjust the memory policy for that task. In short, although it is
possible to iterate through /proc/$pid/sched to locate the problematic
task, the introduction of aggregated NUMA balancing activity for tasks
within each memcg can assist users in identifying the task more
efficiently through a divide-and-conquer approach.
As Libo Chen pointed out, the memcg event relies on the text names in
vmstat_text, and /proc/vmstat generates corresponding items based on
vmstat_text. Thus, the relevant task migration and swapping events
introduced in vmstat_text also need to be populated by
count_vm_numa_event(), otherwise these values are zero in /proc/vmstat.
In theory, task migration and swap events are part of the scheduler's
activities. The reason for exposing them through the
memory.stat/vmstat interface is that we already have NUMA balancing
statistics in memory.stat/vmstat, and these events are closely related
to each other. Following Shakeel's suggestion, we describe the
end-to-end flow/story of all these events occurring on a timeline for
future reference:
The goal of NUMA balancing is to co-locate a task and its memory pages
on the same NUMA node. There are two strategies: migrate the pages to
the task's node, or migrate the task to the node where its pages
reside.
Suppose a task p1 is running on Node 0, but its pages are located on
Node 1. NUMA page fault statistics for p1 reveal its "page footprint"
across nodes. If NUMA balancing detects that most of p1's pages are on
Node 1:
1.Page Migration Attempt:
The Numa balance first tries to migrate p1's pages to Node 0.
The numa_page_migrate counter increments.
2.Task Migration Strategies:
After the page migration finishes, Numa balance checks every
1 second to see if p1 can be migrated to Node 1.
Case 2.1: Idle CPU Available
If Node 1 has an idle CPU, p1 is directly scheduled there. This
event is logged as numa_task_migrated.
Case 2.2: No Idle CPU (Task Swap)
If all CPUs on Node1 are busy, direct migration could cause CPU
contention or load imbalance. Instead: The Numa balance selects a
candidate task p2 on Node 1 that prefers Node 0 (e.g., due to its own
page footprint). p1 and p2 are swapped. This cross-node swap is
recorded as numa_task_swapped.
Link: https://lkml.kernel.org/r/d00edb12ba0f0de3c5222f61487e65f2ac58f5b1.1748493462.git.yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/7ef90a88602ed536be46eba7152ed0d33bad5790.1748002400.git.yu.c.chen@intel.com
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aubrey Li <aubrey.li@intel.com>
Cc: Ayush Jain <Ayush.jain3@amd.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Libo Chen <libo.chen@oracle.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
|
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
Explain the restrictions imposed on ublk servers in two cases:
1. When UBLK_F_PER_IO_DAEMON is set (current ublk_drv)
2. When UBLK_F_PER_IO_DAEMON is not set (legacy)
Remove most references to per-queue daemons, as the new
UBLK_F_PER_IO_DAEMON feature renders that concept obsolete.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-9-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull fbdev updates from Helge Deller:
"Many small but important fixes for special cases in the fbdev, fbcon
and vgacon code which were found with Syzkaller, Svace and other tools
by various people and teams (e.g. Linux Verification Center).
Some smaller code cleanups in the nvidiafb, arkfb, atyfb and viafb
drivers and two spelling fixes"
* tag 'fbdev-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_set_var to prevent null-ptr-deref in fb_videomode_to_var
fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var
fbdev: sstfb.rst: Fix spelling mistake
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
fbcon: Make sure modelist not set on unregistered console
vgacon: Add check for vc_origin address range in vgacon_scroll()
fbdev: arkfb: Cast ics5342_init() allocation type
fbdev: nvidiafb: Correct const string length in nvidiafb_setup()
fbdev: atyfb: Remove unused PCI vendor ID
fbdev: carminefb: Fix spelling mistake of CARMINE_TOTAL_DIPLAY_MEM
fbdev: via: use new GPIO line value setter callbacks
|
|
Pull compiler version requirement update from Arnd Bergmann:
"Require gcc-8 and binutils-2.30
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and
binutils 2.30 is the oldest corresponding version on those.
Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
the system compiler but additionally include toolchains that remain
supported.
With the new minimum toolchain versions, a number of workarounds for
older versions can be dropped, in particular on x86_64 and arm64.
Importantly, the updated compiler version allows removing two of the
five remaining gcc plugins, as support for sancov and structeak
features is already included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches
through the asm-generic tree."
* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
Documentation: update binutils-2.30 version reference
gcc-plugins: remove SANCOV gcc plugin
Kbuild: remove structleak gcc plugin
arm64: drop binutils version checks
raid6: skip avx512 checks
kbuild: require gcc-8 and binutils-2.30
|
|
Pull sophgo SoC devicetree updates from Arnd Bergmann:
"The Sophgo SG2044 SoC is their second generation server chip with 64
cores, following the SG2042.
In addition, there are minor updates for the cv180x SoCs"
* tag 'soc-newsoc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: sophgo: switch precise compatible for existed clock device for CV18XX
riscv: dts: sophgo: Add initial device tree of Sophgo SRD3-10
dt-bindings: riscv: sophgo: Add SG2044 compatible string
dt-bindings: interrupt-controller: Add Sophgo SG2044 PLIC
dt-bindings: interrupt-controller: Add Sophgo SG2044 CLINT mswi
riscv: dts: sopgho: use SOC_PERIPHERAL_IRQ to calculate interrupt number
riscv: dts: sophgo: rename header file cv18xx.dtsi to cv180x.dtsi
riscv: dts: sophgo: Move riscv cpu definition to a separate file
riscv: dts: sophgo: Move all soc specific device into soc dtsi file
riscv: sophgo: dts: Add spi controller for SG2042
riscv: dts: sophgo: sg2042: add pinctrl support
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
|
|
Fix spelling: "tweeks" to "tweaks"
Signed-off-by: Rujra Bhatt <braker.noob.kernel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull automount updates from Al Viro:
"Automount wart removal
A bunch of odd boilerplate gone from instances - the reason for
those was the need to protect the yet-to-be-attched mount from
mark_mounts_for_expiry() deciding to take it out.
But that's easy to detect and take care of in mark_mounts_for_expiry()
itself; no need to have every instance simulate mount being busy by
grabbing an extra reference to it, with finish_automount() undoing
that once it attaches that mount.
Should've done it that way from the very beginning... This is a
flagday change, thankfully there are very few instances.
vfs_submount() is gone - its sole remaining user (trace_automount)
had been switched to saner primitives"
* tag 'pull-automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill vfs_submount()
saner calling conventions for ->d_automount()
|
|
Make heading adornments compliant with the guidelines to improve
organisation of the page.
Signed-off-by: George Anthony Vernon <contact@gvernon.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250526135957.180254-5-contact@gvernon.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Make small grammar fixes to Amiga joystick documentation.
Signed-off-by: George Anthony Vernon <contact@gvernon.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250526135957.180254-4-contact@gvernon.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pinout incorrectly duplicated pin 18, correct this.
Signed-off-by: George Anthony Vernon <contact@gvernon.com>
Link: https://lore.kernel.org/r/20250526135957.180254-3-contact@gvernon.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Missing '+' led to unintended spanning cell. Correct this.
Signed-off-by: George Anthony Vernon <contact@gvernon.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250526135957.180254-2-contact@gvernon.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull iommu updates from Joerg Roedel:
"Core:
- Introduction of iommu-pages infrastructure to consolitate
page-table allocation code among hardware drivers. This is
ground-work for more generalization in the future
- Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags
- Convert virtio-iommu to domain_alloc_paging()
- KConfig cleanups
- Some small fixes for possible overflows and race conditions
Intel VT-d driver:
- Restore WO permissions on second-level paging entries
- Use ida to manage domain id
- Miscellaneous cleanups
AMD-Vi:
- Make sure notifiers finish running before module unload
- Add support for HTRangeIgnore feature
- Allow matching ACPI HID devices without matching UIDs
ARM-SMMU:
- SMMUv2:
- Recognise the compatible string for SAR2130P MDSS in the
Qualcomm driver, as this device requires an identity domain
- Fix Adreno stall handling so that GPU debugging is more robust
and doesn't e.g. result in deadlock
- SMMUv3:
- Fix ->attach_dev() error reporting for unrecognised domains
- IO-pgtable:
- Allow clients (notably, drivers that process requests from
userspace) to silence warnings when mapping an already-mapped
IOVA
S390:
- Add support for additional table regions
Mediatek:
- Add support for MT6893 MM IOMMU
And some smaller fixes and improvements in various other drivers"
* tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (75 commits)
iommu/vt-d: Restore context entry setup order for aliased devices
iommu/mediatek: Fix compatible typo for mediatek,mt6893-iommu-mm
iommu/arm-smmu-qcom: Make set_stall work when the device is on
iommu/arm-smmu: Move handing of RESUME to the context fault handler
iommu/arm-smmu-qcom: Enable threaded IRQ for Adreno SMMUv2/MMU500
iommu/io-pgtable-arm: Add quirk to quiet WARN_ON()
iommu: Clear the freelist after iommu_put_pages_list()
iommu/vt-d: Change dmar_ats_supported() to return boolean
iommu/vt-d: Eliminate pci_physfn() in dmar_find_matched_satc_unit()
iommu/vt-d: Replace spin_lock with mutex to protect domain ida
iommu/vt-d: Use ida to manage domain id
iommu/vt-d: Restore WO permissions on second-level paging entries
iommu/amd: Allow matching ACPI HID devices without matching UIDs
iommu: make inclusion of arm/arm-smmu-v3 directory conditional
iommu: make inclusion of riscv directory conditional
iommu: make inclusion of amd directory conditional
iommu: make inclusion of intel directory conditional
iommu: remove duplicate selection of DMAR_TABLE
iommu/fsl_pamu: remove trailing space after \n
iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible
...
|
|
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
|
|
Pull pin control updates from Linus Walleij:
"An especially linear and sparse improvement and new drivers release.
Nothing exciting. The biggest change in Bartosz changes to make
gpiochip set/get calls return error codes (something we should have
fixed ages ago but is now finally getting fixed.)
Core changes:
- Add the devres devm_pinctrl_register_mappings() call that can
register some pin control machine mappings and have them go away
with the associated device
New drivers:
- Support for the Mediatek MT6893 and MT8196 SoCs
- Support for the Renesas RZ/V2N SoC
- Support for the NXP Freescale i.MX943 SoC
Improvements:
- Per-SoC suspend/resume callbacks in the Samsung drivers
- Set all pins as input (High-Z) at probe in the MCP23S08 driver
- Switch most GPIO chips to use the setters/getters with a return
value
- EGPIO support in the Qualcomm QCM2290 driver
- Fix up the number of available GPIO lines in Qualcomm QCS8300 and
QCS615"
* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
pinctrl: freescale: Add support for imx943 pinctrl
pinctrl: core: add devm_pinctrl_register_mappings()
pinctrl: remove extern specifier for functions in machine.h
pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
pinctrl: freescale: Enable driver if platform is enabled.
pinctrl: freescale: Depend imx-scu driver on OF
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
pinctrl: at91: Fix possible out-of-boundary access
pinctrl: add stubs for OF-specific pinconf functions
pinctrl: qcom: correct the ngpios entry for QCS8300
pinctrl: qcom: correct the ngpios entry for QCS615
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
...
|
|
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
|
|
Pull f2fs updates from Jaegeuk Kim:
"In this round, Matthew converted most of page operations to using
folio. Beyond the work, we've applied some performance tunings such as
GC and linear lookup, in addition to enhancing fault injection and
sanity checks.
Enhancements:
- large number of folio conversions
- add a control to turn on/off the linear lookup for performance
- tune GC logics for zoned block device
- improve fault injection and sanity checks
Bug fixes:
- handle error cases of memory donation
- fix to correct check conditions in f2fs_cross_rename
- fix to skip f2fs_balance_fs() if checkpoint is disabled
- don't over-report free space or inodes in statvfs
- prevent the current section from being selected as a victim during GC
- fix to calculate first_zoned_segno correctly
- fix to avoid inconsistence between SIT and SSA for zoned block device
As usual, there are several debugging patches and clean-ups as well"
* tag 'f2fs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (195 commits)
f2fs: fix to correct check conditions in f2fs_cross_rename
f2fs: use d_inode(dentry) cleanup dentry->d_inode
f2fs: fix to skip f2fs_balance_fs() if checkpoint is disabled
f2fs: clean up to check bi_status w/ BLK_STS_OK
f2fs: introduce is_{meta,node}_folio
f2fs: add ckpt_valid_blocks to the section entry
f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.
f2fs: introduce FAULT_VMALLOC
f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx
f2fs: add f2fs_bug_on() in f2fs_quota_read()
f2fs: add f2fs_bug_on() to detect potential bug
f2fs: remove unused sbi argument from checksum functions
f2fs: fix 32-bits hexademical number in fault injection doc
f2fs: don't over-report free space or inodes in statvfs
f2fs: return bool from __write_node_folio
f2fs: simplify return value handling in f2fs_fsync_node_pages
f2fs: always unlock the page in f2fs_write_single_data_page
f2fs: remove wbc->for_reclaim handling
f2fs: return bool from __f2fs_write_meta_folio
f2fs: fix to return correct error number in f2fs_sync_node_pages()
...
|
|
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on LoongArch, covering
the vdso.
Link: https://lore.kernel.org/all/25bad37f-273e-4626-999c-e1890be96182@lucifer.local/
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits)
scsi: target: core: Constify struct target_opcode_descriptor
scsi: target: core: Constify enabled() in struct target_opcode_descriptor
scsi: hisi_sas: Fix warning detected by sparse
scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer
scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table()
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller
scsi: mvsas: Fix typos in SAS/SATA VSP register comments
scsi: fnic: Replace memset() with eth_zero_addr()
scsi: ufs: core: Support updating device command timeout
scsi: ufs: core: Change hwq_id type and value
scsi: ufs: core: Increase the UIC command timeout further
scsi: zfcp: Simplify workqueue allocation
scsi: ufs: core: Print error value as hex format in ufshcd_err_handler()
scsi: sd: Remove the stream_status member from scsi_stream_status_header
scsi: docs: Clean up some style in scsi_mid_low_api
scsi: core: Remove unused scsi_dev_info_list_del_keyed()
scsi: isci: Remove unused sci_remote_device_reset()
scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH
scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream()
...
|
|
Pull IPMI updates from Corey Minyard:
"Restructure the IPMI driver.
This is a restructure of the IPMI driver, mostly to remove SRCU. The
locking had issues, and they were not going to be straightforward to
fix. Plus it used tons of memory and was generally a pain.
Most of this moves handling of messages out of bh and interrupt
context and runs it in thread context. Then getting rid of SRCU is
easy.
This also has a minor cleanup to remove a warning on newer GCCs and to
fix some documentation"
* tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi: (26 commits)
docs: ipmi: fix spelling and grammar mistakes
ipmi:msghandler: Fix potential memory corruption in ipmi_create_user()
ipmi:watchdog: Use the new interface for panic messages
ipmi:msghandler: Export and fix panic messaging capability
Documentation:ipmi: Remove comments about interrupt level
ipmi:ssif: Fix a shutdown race
ipmi:msghandler: Don't deliver messages to deleted users
ipmi:si: Rework startup of IPMI devices
ipmi:msghandler: Add a error return from unhandle LAN cmds
ipmi:msghandler: Shut down lower layer first at unregister
ipmi:msghandler: Remove proc_fs.h
ipmi:msghandler: Don't check for shutdown when returning responses
ipmi:msghandler: Don't acquire a user refcount for queued messages
ipmi:msghandler: Fix locking around users and interfaces
ipmi:msghandler: Remove some user level processing in panic mode
ipmi: Add a note about the pretimeout callback
ipmi:watchdog: Change lock to mutex
ipmi:msghandler: Remove srcu for the ipmi_interfaces list
ipmi:msghandler: Remove srcu from the ipmi user structure
ipmi:msghandler: Use the system_wq, not system_bh_wq
...
|
|
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
|
|
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
|
|
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
|
|
Pull driver core updates from Greg KH:
"Here are the driver core / kernfs changes for 6.16-rc1.
Not a huge number of changes this development cycle, here's the
summary of what is included in here:
- kernfs locking tweaks, pushing some global locks down into a per-fs
image lock
- rust driver core and pci device bindings added for new features.
- sysfs const work for bin_attributes.
The final churn of switching away from and removing the
transitional struct members, "read_new", "write_new" and
"bin_attrs_new" will come after the merge window to avoid
unnecesary merge conflicts.
- auxbus device creation helpers added
- fauxbus fix for creating sysfs files after the probe completed
properly
- other tiny updates for driver core things.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
kernfs: Relax constraint in draining guard
Documentation: embargoed-hardware-issues.rst: Remove myself
drivers: hv: fix up const issue with vmbus_chan_bin_attrs
firmware_loader: use SHA-256 library API instead of crypto_shash API
docs: debugfs: do not recommend debugfs_remove_recursive
PM: wakeup: Do not expose 4 device wakeup source APIs
kernfs: switch global kernfs_rename_lock to per-fs lock
kernfs: switch global kernfs_idr_lock to per-fs lock
driver core: auxiliary bus: Fix IS_ERR() vs NULL mixup in __devm_auxiliary_device_create()
sysfs: constify attribute_group::bin_attrs
sysfs: constify bin_attribute argument of bin_attribute::read/write()
software node: Correct a OOB check in software_node_get_reference_args()
devres: simplify devm_kstrdup() using devm_kmemdup()
platform: replace magic number with macro PLATFORM_DEVID_NONE
component: do not try to unbind unbound components
driver core: auxiliary bus: add device creation helpers
driver core: faux: Add sysfs groups after probing
|
|
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
|
Pull IPE update from Fan Wu:
"A single commit from Jasjiv Singh, that adds an errno field to IPE
policy load auditing to log failures with error details, not just
successes.
This improves the security audit trail and helps diagnose policy
deployment issues"
* tag 'ipe-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: add errno field to IPE policy load auditing
|
|
APCS "global" is sort of a "miscellaneous" hardware block that combines
multiple registers inside the application processor subsystem. Two distinct
use cases are currently stuffed together in a single device tree node:
- Mailbox: to communicate with other remoteprocs in the system.
- Clock: for controlling the CPU frequency.
These two use cases have unavoidable circular dependencies: the mailbox is
needed as early as possible during boot to start controlling shared
resources like clocks and power domains, while the clock controller needs
one of these shared clocks as its parent. Currently, there is no way to
distinguish these two use cases for generic mechanisms like fw_devlink.
This is currently blocking conversion of the deprecated custom "qcom,ipc"
properties to the standard "mboxes", see e.g. commit d92e9ea2f0f9
("arm64: dts: qcom: msm8939: revert use of APCS mbox for RPM"):
1. remoteproc &rpm needs mboxes = <&apcs1_mbox 8>;
2. The clock controller inside &apcs1_mbox needs
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>.
3. &rpmcc is a child of remoteproc &rpm
The mailbox itself does not need any clocks and should probe early to
unblock the rest of the boot process. The "clocks" are only needed for the
separate clock controller. In Linux, these are already two separate drivers
that can probe independently.
Break up the circular dependency chain in the device tree by separating the
clock controller into a separate child node. Deprecate the old approach of
specifying the clock properties as part of the root node, but keep them for
backwards compatibility.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
* clk-amlogic:
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
* clk-allwinner:
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: sunxi: Do not enable by default during compile testing
clk: sunxi-ng: Do not enable by default during compile testing
* clk-rockchip:
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
dt-bindings: clock: rk3036: add SCLK_USB480M clock-id
clk: rockchip: rk3528: Add SD/SDIO tuning clocks in GRF region
clk: rockchip: Support MMC clocks in GRF region
dt-bindings: clock: Add GRF clock definition for RK3528
clk: rockchip: add GATE_GRFs for SAI MCLKOUT to rk3576
clk: rockchip: introduce GRF gates
clk: rockchip: introduce auxiliary GRFs
dt-bindings: clock: rk3576: add IOC gated clocks
clk: rockchip: rk3568: Add PLL rate for 33.3MHz
clk: rockchip: Drop empty init callback for rk3588 PLL type
clk: rockchip: rk3588: Add PLL rate for 1500 MHz
* clk-qcom:
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: qcom: gpucc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: gcc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: dispcc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: camcc-sm6350: Add *_wait_val values for GDSCs
clk: qcom: Fix missing error check for dev_pm_domain_attach()
|
|
* clk-socfpga:
clk: socfpga: stratix10: Optimize local variables
clk: socfpga: clk-pll: Optimize local variables
* clk-sophgo:
clk: sophgo: Add clock controller support for SG2044 SoC
clk: sophgo: Add PLL clock controller support for SG2044 SoC
dt-bindings: clock: sophgo: add clock controller for SG2044
dt-bindings: soc: sophgo: Add SG2044 top syscon device
clk: sophgo: Add support for newly added precise compatible
dt-bindings: clock: sophgo: Use precise compatible for CV1800 series SoC
* clk-thead:
clk: thead: Add clock support for VO subsystem in T-HEAD TH1520 SoC
dt-bindings: clock: thead: Add TH1520 VO clock controller
* clk-samsung:
clk: samsung: correct clock summary for hsi1 block
clk: samsung: exynosautov920: Fix incorrect CLKS_NR_CPUCL0 definition
clk: samsung: exynosautov920: add cpucl1/2 clock support
dt-bindings: clock: exynosautov920: add cpucl1/2 clock definitions
clk: samsung: exynosautov920: add cpucl0 clock support
dt-bindings: clock: exynosautov920: add cpucl0 clock definitions
clk: samsung: Use samsung CCF common function
|
|
* clk-bindings:
dt-bindings: clock: Drop st,stm32h7-rcc.txt
dt-bindings: clock: convert bcm2835-aux-clock to yaml
dt-bindings: clock: Drop maxim,max77686.txt
dt-bindings: clock: convert vf610-clock.txt to yaml format
* clk-renesas: (26 commits)
clk: renesas: r9a09g047: Add XSPI clock/reset
clk: renesas: r9a09g047: Add support for xspi mux and divider
dt-bindings: clock: renesas,r9a09g047-cpg: Add XSPI and GBETH PTP core clocks
clk: renesas: Use str_on_off() helper
clk: renesas: r9a09g057: Add clock and reset entries for USB2
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB2 PHY and GBETH PTP core clocks
clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validation
clk: renesas: rzv2h: Use str_on_off() helper in rzv2h_mod_clock_endisable()
clk: renesas: rzv2h: Support static dividers without RMW
clk: renesas: rzv2h: Add macro for defining static dividers
clk: renesas: rzv2h: Add support for static mux clocks
clk: renesas: r9a09g047: Add clock and reset entries for GE3D
clk: renesas: rzv2h: Fix a typo
clk: renesas: rzv2h: Add support for RZ/V2N SoC
clk: renesas: rzv2h: Sort compatible list based on SoC part number
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
clk: renesas: rzv2h: Simplify rzv2h_cpg_assert()/rzv2h_cpg_deassert()
...
* clk-spacemit:
clk: spacemit: k1: Add TWSI8 bus and function clocks
clk: spacemit: Add clock support for SpacemiT K1 SoC
dt-bindings: clock: spacemit: Add spacemit,k1-pll
dt-bindings: soc: spacemit: Add spacemit,k1-syscon
* clk-cleanup:
clk: test: Forward-declare struct of_phandle_args in kunit/clk.h
clk: davinci: Use of_get_available_child_by_name()
clk: bcm: rpi: Add NULL check in raspberrypi_clk_register()
clk: bcm: rpi: Drop module alias
clk: bcm: kona: Remove unused scaled_div_build
|
|
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
|
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
Linus Torvalds
Miquel Raynal
David Lechner
Xi Ruoyao
Wolfram Sang
Lad Prabhakar
Igor Belwon
Chen Yu
Uday Shankar
Rujra Bhatt
George Anthony Vernon
Yuli Wang
Stephan Gerhold
Stephen Boyd