| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull crypto library test updates from Eric Biggers:
- Add KUnit test suites for SHA-3, BLAKE2b, and POLYVAL. These are the
algorithms that have new crypto library interfaces this cycle.
- Remove the crypto_shash POLYVAL tests. They're no longer needed
because POLYVAL support was removed from crypto_shash. Better POLYVAL
test coverage is now provided via the KUnit test suite.
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Remove polyval tests
lib/crypto: tests: Add KUnit tests for POLYVAL
lib/crypto: tests: Add additional SHAKE tests
lib/crypto: tests: Add SHA3 kunit tests
lib/crypto: tests: Add KUnit tests for BLAKE2b
|
|
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
|
|
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
|
|
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
|
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
|
|
Pull x86 resource control updates from Borislav Petkov:
- Add support for AMD's Smart Data Cache Injection feature which allows
for direct insertion of data from I/O devices into the L3 cache, thus
bypassing DRAM and saving its bandwidth; the resctrl side of the
feature allows the size of the L3 used for data injection to be
controlled
- Add Intel Clearwater Forest to the list of CPUs which support
Sub-NUMA clustering
- Other fixes and cleanups
* tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Update bit_usage to reflect io_alloc
fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks
fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID
fs/resctrl: Introduce interface to display io_alloc CBMs
fs/resctrl: Add user interface to enable/disable io_alloc feature
fs/resctrl: Introduce interface to display "io_alloc" support
x86,fs/resctrl: Implement "io_alloc" enable/disable handlers
x86,fs/resctrl: Detect io_alloc feature
x86/resctrl: Add SDCIAE feature in the command line options
x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement
fs/resctrl: Consider sparse masks when initializing new group's allocation
x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest
|
|
Pull EDAC updates from Borislav Petkov:
- imh_edac: Add a new EDAC driver for Intel Diamond Rapids and future
incarnations of this memory controllers architecture
- amd64_edac: Remove the legacy csrow sysfs interface which has been
deprecated and unused (we assume) for at least a decade
- Add the capability to fallback to BIOS-provided address translation
functionality (ACPI PRM) which can be used on systems unsupported by
the current AMD address translation library
- The usual fixes, fixlets, cleanups and improvements all over the
place
* tag 'edac_updates_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Replace bitwise_xor_bits() with hweight16()
EDAC/igen6: Fix error handling in igen6_edac driver
EDAC/imh: Setup 'imh_test' debugfs testing node
EDAC/{skx_comm,imh}: Detect 2-level memory configuration
EDAC/skx_common: Extend the maximum number of DRAM chip row bits
EDAC/{skx_common,imh}: Add EDAC driver for Intel Diamond Rapids servers
EDAC/skx_common: Prepare for skx_set_hi_lo()
EDAC/skx_common: Prepare for skx_get_edac_list()
EDAC/{skx_common,skx,i10nm}: Make skx_register_mci() independent of pci_dev
EDAC/ghes: Replace deprecated strcpy() in ghes_edac_report_mem_error()
EDAC/ie31200: Fix error handling in ie31200_register_mci
RAS/CEC: Replace use of system_wq with system_percpu_wq
EDAC: Remove the legacy EDAC sysfs interface
EDAC/amd64: Remove NUM_CONTROLLERS macro
EDAC/amd64: Generate ctl_name string at runtime
RAS/AMD/ATL: Require PRM support for future systems
ACPI: PRM: Add acpi_prm_handler_available()
RAS/AMD/ATL: Return error codes from helper functions
|
|
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource and clockevent drivers:
- A new driver for the Realtel system timer
- Prevent the unbinding of timers when the drivers do not support
that
- Expand the timer counter readout for the SPRD driver to 64 bit
to allow IOT devices suspend times of more than 36 hours, which
is the current limit of the 32-bi readout
- The usual small cleanups, fixes and enhancements all over the
place"
* tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers: Add Realtek system timer driver
dt-bindings: timer: Add Realtek SYSTIMER
clocksource/drivers/stm32-lp: Drop unused module alias
clocksource/drivers/rda: Add sched_clock_register for RDA8810PL SoC
clocksource/drivers/nxp-stm: Prevent driver unbind
clocksource/drivers/nxp-pit: Prevent driver unbind
clocksource/drivers/arm_arch_timer_mmio: Prevent driver unbind
clocksource/drivers/nxp-stm: Fix section mismatches
clocksource/drivers/sh_cmt: Always leave device running after probe
clocksource/drivers/stm: Fix double deregistration on probe failure
clocksource/drivers/ralink: Fix resource leaks in init error path
clocksource/drivers/timer-sp804: Fix read_current_timer() issue when clock source is not registered
clocksource/drivers/sprd: Enable register for timer counter from 32 bit to 64 bit
|
|
Pull irq driver updates from Thomas Gleixner:
"Boring updates for interrupt drivers:
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation
- More section mismatch fixes
- The usual cleanups and fixes all over the place"
* tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/meson-gpio: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count
irqchip/aclint-sswi: Add Nuclei UX900 support
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
irqchip/irq-bcm7038-l1: Remove unused reg_mask_status()
irqchip/sifive-plic: Fix call to __plic_toggle() in M-Mode code path
irqchip/sifive-plic: Add support for UltraRISC DP1000 PLIC
irqchip/sifive-plic: Cache the interrupt enable state
dt-bindings: interrupt-controller: Add UltraRISC DP1000 PLIC
dt-bindings: vendor-prefixes: Add UltraRISC
irqchip/qcom-irq-combiner: Rename driver structure
irqchip/riscv-imsic: Inline imsic_vector_from_local_id()
irqchip/riscv-imsic: Embed the vector array in lpriv
irqchip/riscv-imsic: Remove redundant irq_data lookups
irqchip/ts4800: Drop unused module alias
irqchip/mvebu-pic: Drop unused module alias
irqchip/meson-gpio: Drop unused module alias
...
|
|
Pull rseq updates from Thomas Gleixner:
"A large overhaul of the restartable sequences and CID management:
The recent enablement of RSEQ in glibc resulted in regressions which
are caused by the related overhead. It turned out that the decision to
invoke the exit to user work was not really a decision. More or less
each context switch caused that. There is a long list of small issues
which sums up nicely and results in a 3-4% regression in I/O
benchmarks.
The other detail which caused issues due to extra work in context
switch and task migration is the CID (memory context ID) management.
It also requires to use a task work to consolidate the CID space,
which is executed in the context of an arbitrary task and results in
sporadic uncontrolled exit latencies.
The rewrite addresses this by:
- Removing deprecated and long unsupported functionality
- Moving the related data into dedicated data structures which are
optimized for fast path processing.
- Caching values so actual decisions can be made
- Replacing the current implementation with a optimized inlined
variant.
- Separating fast and slow path for architectures which use the
generic entry code, so that only fault and error handling goes into
the TIF_NOTIFY_RESUME handler.
- Rewriting the CID management so that it becomes mostly invisible in
the context switch path. That moves the work of switching modes
into the fork/exit path, which is a reasonable tradeoff. That work
is only required when a process creates more threads than the
cpuset it is allowed to run on or when enough threads exit after
that. An artificial thread pool benchmarks which triggers this did
not degrade, it actually improved significantly.
The main effect in migration heavy scenarios is that runqueue lock
held time and therefore contention goes down significantly"
* tag 'core-rseq-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/mmcid: Switch over to the new mechanism
sched/mmcid: Implement deferred mode change
irqwork: Move data struct to a types header
sched/mmcid: Provide CID ownership mode fixup functions
sched/mmcid: Provide new scheduler CID mechanism
sched/mmcid: Introduce per task/CPU ownership infrastructure
sched/mmcid: Serialize sched_mm_cid_fork()/exit() with a mutex
sched/mmcid: Provide precomputed maximal value
sched/mmcid: Move initialization out of line
signal: Move MMCID exit out of sighand lock
sched/mmcid: Convert mm CID mask to a bitmap
cpumask: Cache num_possible_cpus()
sched/mmcid: Use cpumask_weighted_or()
cpumask: Introduce cpumask_weighted_or()
sched/mmcid: Prevent pointless work in mm_update_cpus_allowed()
sched/mmcid: Move scheduler code out of global header
sched: Fixup whitespace damage
sched/mmcid: Cacheline align MM CID storage
sched/mmcid: Use proper data structures
sched/mmcid: Revert the complex CID management
...
|
|
Pull locking updates from Ingo Molnar:
"Mutexes:
- Redo __mutex_init() to reduce generated code size (Sebastian
Andrzej Siewior)
Seqlocks:
- Introduce scoped_seqlock_read() (Peter Zijlstra)
- Change thread_group_cputime() to use scoped_seqlock_read() (Oleg
Nesterov)
- Change do_task_stat() to use scoped_seqlock_read() (Oleg Nesterov)
- Change do_io_accounting() to use scoped_seqlock_read() (Oleg
Nesterov)
- Fix the incorrect documentation of read_seqbegin_or_lock() /
need_seqretry() (Oleg Nesterov)
- Allow KASAN to fail optimizing (Peter Zijlstra)
Local lock updates:
- Fix all kernel-doc warnings (Randy Dunlap)
- Add the <linux/local_lock*.h> headers to MAINTAINERS (Sebastian
Andrzej Siewior)
- Reduce the risk of shadowing via s/l/__l/ and s/tl/__tl/ (Vincent
Mailhol)
Lock debugging:
- spinlock/debug: Fix data-race in do_raw_write_lock (Alexander
Sverdlin)
Atomic primitives infrastructure:
- atomic: Skip alignment check for try_cmpxchg() old arg (Arnd
Bergmann)
Rust runtime integration:
- sync: atomic: Enable generated Atomic<T> usage (Boqun Feng)
- sync: atomic: Implement Debug for Atomic<Debug> (Boqun Feng)
- debugfs: Remove Rust native atomics and replace them with Linux
versions (Boqun Feng)
- debugfs: Implement Reader for Mutex<T> only when T is Unpin (Boqun
Feng)
- lock: guard: Add T: Unpin bound to DerefMut (Daniel Almeida)
- lock: Pin the inner data (Daniel Almeida)
- lock: Add a Pin<&mut T> accessor (Daniel Almeida)"
* tag 'locking-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/local_lock: Fix all kernel-doc warnings
locking/local_lock: s/l/__l/ and s/tl/__tl/ to reduce the risk of shadowing
locking/local_lock: Add the <linux/local_lock*.h> headers to MAINTAINERS
locking/mutex: Redo __mutex_init() to reduce generated code size
rust: debugfs: Replace the usage of Rust native atomics
rust: sync: atomic: Implement Debug for Atomic<Debug>
rust: sync: atomic: Make Atomic*Ops pub(crate)
seqlock: Allow KASAN to fail optimizing
rust: debugfs: Implement Reader for Mutex<T> only when T is Unpin
seqlock: Change do_io_accounting() to use scoped_seqlock_read()
seqlock: Change do_task_stat() to use scoped_seqlock_read()
seqlock: Change thread_group_cputime() to use scoped_seqlock_read()
seqlock: Introduce scoped_seqlock_read()
documentation: seqlock: fix the wrong documentation of read_seqbegin_or_lock/need_seqretry
atomic: Skip alignment check for try_cmpxchg() old arg
rust: lock: Add a Pin<&mut T> accessor
rust: lock: Pin the inner data
rust: lock: guard: Add T: Unpin bound to DerefMut
locking/spinlock/debug: Fix data-race in do_raw_write_lock
|
|
Pull directory locking updates from Christian Brauner:
"This contains the work to add centralized APIs for directory locking
operations.
This series is part of a larger effort to change directory operation
locking to allow multiple concurrent operations in a directory. The
ultimate goal is to lock the target dentry(s) rather than the whole
parent directory.
To help with changing the locking protocol, this series centralizes
locking and lookup in new helper functions. The helpers establish a
pattern where it is the dentry that is being locked and unlocked
(currently the lock is held on dentry->d_parent->d_inode, but that can
change in the future).
This also changes vfs_mkdir() to unlock the parent on failure, as well
as dput()ing the dentry. This allows end_creating() to only require
the target dentry (which may be IS_ERR() after vfs_mkdir()), not the
parent"
* tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nfsd: fix end_creating() conversion
VFS: introduce end_creating_keep()
VFS: change vfs_mkdir() to unlock on failure.
ecryptfs: use new start_creating/start_removing APIs
Add start_renaming_two_dentries()
VFS/ovl/smb: introduce start_renaming_dentry()
VFS/nfsd/ovl: introduce start_renaming() and end_renaming()
VFS: add start_creating_killable() and start_removing_killable()
VFS: introduce start_removing_dentry()
smb/server: use end_removing_noperm for for target of smb2_create_link()
VFS: introduce start_creating_noperm() and start_removing_noperm()
VFS/nfsd/cachefiles/ovl: introduce start_removing() and end_removing()
VFS/nfsd/cachefiles/ovl: add start_creating() and end_creating()
VFS: tidy up do_unlinkat()
VFS: introduce start_dirop() and end_dirop()
debugfs: rename end_creating() to debugfs_end_creating()
|
|
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
|
|
Pull iomap updates from Christian Brauner:
"FUSE iomap Support for Buffered Reads:
This adds iomap support for FUSE buffered reads and readahead. This
enables granular uptodate tracking with large folios so only
non-uptodate portions need to be read. Also fixes a race condition
with large folios + writeback cache that could cause data corruption
on partial writes followed by reads.
- Refactored iomap read/readahead bio logic into helpers
- Added caller-provided callbacks for read operations
- Moved buffered IO bio logic into new file
- FUSE now uses iomap for read_folio and readahead
Zero Range Folio Batch Support:
Add folio batch support for iomap_zero_range() to handle dirty
folios over unwritten mappings. Fix raciness issues where dirty data
could be lost during zero range operations.
- filemap_get_folios_tag_range() helper for dirty folio lookup
- Optional zero range dirty folio processing
- XFS fills dirty folios on zero range of unwritten mappings
- Removed old partial EOF zeroing optimization
DIO Write Completions from Interrupt Context:
Restore pre-iomap behavior where pure overwrite completions run
inline rather than being deferred to workqueue. Reduces context
switches for high-performance workloads like ScyllaDB.
- Removed unused IOCB_DIO_CALLER_COMP code
- Error completions always run in user context (fixes zonefs)
- Reworked REQ_FUA selection logic
- Inverted IOMAP_DIO_INLINE_COMP to IOMAP_DIO_OFFLOAD_COMP
Buffered IO Cleanups:
Some performance and code clarity improvements:
- Replace manual bitmap scanning with find_next_bit()
- Simplify read skip logic for writes
- Optimize pending async writeback accounting
- Better variable naming
- Documentation for iomap_finish_folio_write() requirements
Misaligned Vectors for Zoned XFS:
Enables sub-block aligned vectors in XFS always-COW mode for zoned
devices via new IOMAP_DIO_FSBLOCK_ALIGNED flag.
Bug Fixes:
- Allocate s_dio_done_wq for async reads (fixes syzbot report after
error completion changes)
- Fix iomap_read_end() for already uptodate folios (regression fix)"
* tag 'vfs-6.19-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (40 commits)
iomap: allocate s_dio_done_wq for async reads as well
iomap: fix iomap_read_end() for already uptodate folios
iomap: invert the polarity of IOMAP_DIO_INLINE_COMP
iomap: support write completions from interrupt context
iomap: rework REQ_FUA selection
iomap: always run error completions in user context
fs, iomap: remove IOCB_DIO_CALLER_COMP
iomap: use find_next_bit() for uptodate bitmap scanning
iomap: use find_next_bit() for dirty bitmap scanning
iomap: simplify when reads can be skipped for writes
iomap: simplify ->read_folio_range() error handling for reads
iomap: optimize pending async writeback accounting
docs: document iomap writeback's iomap_finish_folio_write() requirement
iomap: account for unaligned end offsets when truncating read range
iomap: rename bytes_pending/bytes_accounted to bytes_submitted/bytes_not_submitted
xfs: support sub-block aligned vectors in always COW mode
iomap: add IOMAP_DIO_FSBLOCK_ALIGNED flag
xfs: error tag to force zeroing on debug kernels
iomap: remove old partial eof zeroing optimization
xfs: fill dirty folios on zero range of unwritten mappings
...
|
|
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
|
|
'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
|
|
Merge energy model management updates and operating performance points
(OPP) library changes for 6.19-rc1:
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
* pm-em:
PM: EM: Add to em_pd_list only when no failure
PM: EM: Notify an event when the performance domain changes
PM: EM: Implement em_notify_pd_created/updated()
PM: EM: Implement em_notify_pd_deleted()
PM: EM: Implement em_nl_get_pd_table_doit()
PM: EM: Implement em_nl_get_pds_doit()
PM: EM: Add an iterator and accessor for the performance domain
PM: EM: Add a skeleton code for netlink notification
PM: EM: Add em.yaml and autogen files
PM: EM: Expose the ID of a performance domain via debugfs
PM: EM: Assign a unique ID when creating a performance domain
* pm-opp:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
|
|
Merge cpufreq updates for 6.19-rc1:
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate cpufreq
driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking in
it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi, Hal
Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
* pm-cpufreq: (27 commits)
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
cpufreq: ACPI: Replace udelay() with usleep_range()
cpufreq: intel_pstate: Eliminate some code duplication
cpufreq: intel_pstate: Use mutex guard for driver locking
cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs
cpufreq/amd-pstate: Add static asserts for EPP indices
cpufreq/amd-pstate: Fix some whitespace issues
cpufreq/amd-pstate: Adjust return values in amd_pstate_update_status()
cpufreq/amd-pstate: Make amd_pstate_get_mode_string() never return NULL
cpufreq/amd-pstate: Drop NULL value from amd_pstate_mode_string
cpufreq/amd-pstate: Use sysfs_match_string() for epp
cpufreq: tegra194: add WQ_PERCPU to alloc_workqueue users
cpufreq: qcom-nvmem: add compatible fallback for ipq806x for no SMEM
Documentation: intel-pstate: Use :ref: directive for internal linking
cpufreq: intel_pstate: Add Diamond Rapids OOB mode support
Documentation: intel_pstate: fix duplicate hyperlink target errors
cpufreq: CPPC: Don't warn if FIE init fails to read counters
cpufreq: nforce2: fix reference count leak in nforce2
cpufreq: tegra186: add OPP support and set bandwidth
cpufreq: dt-platdev: Add JH7110S SOC to the allowlist
...
|
|
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
|
|
Merge a core power management update and runtime PM framework updates
for 6.19-rc1:
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
* pm-core:
PM: WQ_UNBOUND added to pm_wq workqueue
* pm-runtime:
PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR()
PM: runtime: fix typos in runtime.c comments
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
PM: runtime: docs: Update pm_runtime_allow/forbid() documentation
|
|
Pull thermal control changes for 6.19-rc1 from Daniel Lezcano:
"- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS in the R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for the QCom Tsens (Gaurav Kohli)
- Add the support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)
* tag 'thermal-v6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
|
|
Add bindings documentation for i.MX91 thermal modules.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020-imx91tmu-v7-1-48d7d9f25055@nxp.com
|
|
Add compatibility string for the thermal sensors on QCS8300 platform.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://patch.msgid.link/20250822042316.1762153-2-quic_gkohli@quicinc.com
|
|
The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter
operating at a fixed 1MHz frequency. Thanks to its compare match
interrupt capability, the timer natively supports oneshot mode for tick
broadcast functionality.
Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251126060110.198330-2-haowen.ting@realtek.com
|
|
Let's document how the new CPU system wakeup latency QoS limit can be used
from user space, along with how the constraint is taken into account for
s2idle and cpuidle.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-7-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The tsens IP found in the IPQ5018 SoC should not use qcom,tsens-v1 as
fallback since it has no RPM and, as such, must deviate from the
standard v1 init routine as this version of tsens needs to be explicitly
reset and enabled in the driver.
So let's make qcom,ipq5018-tsens a standalone compatible in the bindings.
Fixes: 77c6d28192ef ("dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250818-ipq5018-tsens-fix-v1-1-0f08cf09182d@outlook.com
|
|
The register name 'HWFGWTR_EL2' and 'HWFGRTR_EL2' is wrong, should be 'HFGWTR_EL2' and 'HFGRTR_EL2'.
Find the register description on arm website here,
https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGWTR-EL2--Hypervisor-Fine-Grained-Write-Trap-Register
https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGRTR-EL2--Hypervisor-Fine-Grained-Read-Trap-Register?lang=en
Signed-off-by: Zenon Xiu <zenonxiu@outlook.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This was added by commit 099ada2c8726 ("io_uring/rw: add write support
for IOCB_DIO_CALLER_COMP") and disabled a little later by commit
838b35bb6a89 ("io_uring/rw: disable IOCB_DIO_CALLER_COMP") because it
didn't work. Remove all the related code that sat unused for 2 years.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251113170633.1453259-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add compatible string fsl,imx8qm-ddr-pmu, fsl,imx8qxp-ddr-pmu, which
fallback to fsl,imx8-ddr-pmu and fsl,imx8dxl-db-pmu (for data bus fabric).
Add clocks, clock-names for fsl,imx8dxl-db-pmu and keep the same
restriction for existing compatible strings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
|
|
The "shareable_bits" and "bit_usage" resctrl files associated with cache
resources give insight into how instances of a cache is used.
Update the annotated capacity bitmasks displayed by "bit_usage" to include the
cache portions allocated for I/O via the "io_alloc" feature. "shareable_bits"
is a global bitmask of shareable cache with I/O and can thus not present the
per-domain I/O allocations possible with the "io_alloc" feature. Revise the
"shareable_bits" documentation to direct users to "bit_usage" for accurate
cache usage information.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e02a0d424129fd7f3e45822a559b1c614ae4652a.1762995456.git.babu.moger@amd.com
|
|
The io_alloc feature in resctrl enables system software to configure the
portion of the cache allocated for I/O traffic. When supported, the
io_alloc_cbm file in resctrl provides access to capacity bitmasks (CBMs)
allocated for I/O devices.
Enable users to modify io_alloc CBMs by writing to the io_alloc_cbm resctrl
file when the io_alloc feature is enabled.
Mirror the CBMs between CDP_CODE and CDP_DATA when CDP is enabled to present
consistent I/O allocation information to user space.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/67609641b03ccfba18a8ee0bf9dbd1f3dcbecda3.1762995456.git.babu.moger@amd.com
|
|
Introduce the "io_alloc_cbm" resctrl file to display the capacity bitmasks
(CBMs) that represent the portions of each cache instance allocated
for I/O traffic on a cache resource that supports the "io_alloc" feature.
io_alloc_cbm resides in the info directory of a cache resource, for example,
/sys/fs/resctrl/info/L3/. Since the resource name is part of the path, it
is not necessary to display the resource name as done in the schemata file.
When CDP is enabled, io_alloc routes traffic using the highest CLOSID
associated with the CDP_CODE resource and that CLOSID becomes unusable for
the CDP_DATA resource. The highest CLOSID of CDP_CODE and CDP_DATA resources
will be kept in sync to ensure consistent user interface. In preparation for
this, access the CBMs for I/O traffic through highest CLOSID of either
CDP_CODE or CDP_DATA resource.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/55a3ff66a70e7ce8239f022e62b334e9d64af604.1762995456.git.babu.moger@amd.com
|
|
AMD's SDCIAE forces all SDCI lines to be placed into the L3 cache portions
identified by the highest-supported L3_MASK_n register, where n is the maximum
supported CLOSID.
To support this, when io_alloc resctrl feature is enabled, reserve the highest
CLOSID exclusively for I/O allocation traffic making it no longer available for
general CPU cache allocation.
Introduce user interface to enable/disable io_alloc feature and encourage users
to enable io_alloc only when running workloads that can benefit from this
functionality. On enable, initialize the io_alloc CLOSID with all usable CBMs
across all the domains.
Since CLOSIDs are managed by resctrl fs, it is least invasive to make "io_alloc
is supported by maximum supported CLOSID" part of the initial resctrl fs
support for io_alloc. Take care to minimally (only in error messages) expose
this use of CLOSID for io_alloc to user space so that this is not required from
other architectures that may support io_alloc differently in the future.
When resctrl is mounted with "-o cdp" to enable code/data prioritization,
there are two L3 resources that can support I/O allocation: L3CODE and
L3DATA. From resctrl fs perspective the two resources share a CLOSID and
the architecture's available CLOSID are halved to support this.
The architecture's underlying CLOSID used by SDCIAE when CDP is enabled is the
CLOSID associated with the CDP_CODE resource, but from resctrl's perspective
there is only one CLOSID for both CDP_CODE and CDP_DATA. CDP_DATA is thus not
usable for general (CPU) cache allocation nor I/O allocation.
Keep the CDP_CODE and CDP_DATA I/O alloc status in sync to avoid any confusion
to user space. That is, enabling io_alloc on CDP_CODE does so on CDP_DATA and
vice-versa, and keep the I/O allocation CBMs of CDP_CODE and CDP_DATA in sync.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c7d3037795e653e22b02d8fc73ca80d9b075031c.1762995456.git.babu.moger@amd.com
|
|
Introduce the "io_alloc" resctrl file to the "info" area of a cache resource,
for example /sys/fs/resctrl/info/L3/io_alloc. "io_alloc" indicates support for
the "io_alloc" feature that allows direct insertion of data from I/O
devices into the cache.
Restrict exposing support for "io_alloc" to the L3 resource that is the only
resource where this feature can be backed by AMD's L3 Smart Data Cache
Injection Allocation Enforcement (SDCIAE). With that, the "io_alloc" file is
only visible to user space if the L3 resource supports "io_alloc".
Doing so makes the file visible for all cache resources though, for example
also L2 cache (if it supports cache allocation). As a consequence, add
capability for file to report expected "enabled" and "disabled", as well as
"not supported".
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e8b116a8f424128b227734bb1d433c14af478d90.1762995456.git.babu.moger@amd.com
|
|
Add a kernel command-line parameter to enable or disable the exposure of
the L3 Smart Data Cache Injection Allocation Enforcement (SDCIAE) hardware
feature to resctrl.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c623edf7cb369ba9da966de47d9f1b666778a40e.1762995456.git.babu.moger@amd.com
|
|
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
|
|
|
|
Add documentation for longer term classification of workload type for
power or performance.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251118223620.554798-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
|
|
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38a3 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9db ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently it is not possible to disable streaming mode via ptrace on SME
only systems, the interface for doing this is to write via NT_ARM_SVE but
such writes will be rejected on a system without SVE support. Enable this
functionality by allowing userspace to write SVE_PT_REGS_FPSIMD format data
via NT_ARM_SVE with the vector length set to 0 on SME only systems. Such
writes currently error since we require that a vector length is specified
which should minimise the risk that existing software is relying on current
behaviour.
Reads are not supported since I am not aware of any use case for this and
there is some risk that an existing userspace application may be confused if
it reads NT_ARM_SVE on a system without SVE. Existing kernels will return
FPSIMD formatted register state from NT_ARM_SVE if full SVE state is not
stored, for example if the task has not used SVE. Returning a vector length
of 0 would create a risk that software would try to do things like allocate
space for register state with zero sizes, while returning a vector length of
128 bits would look like SVE is supported. It seems safer to just not make
the changes to add read support.
It remains possible for userspace to detect a SME only system via the ptrace
interface only since reads of NT_ARM_SSVE and NT_ARM_ZA will succeed while
reads of NT_ARM_SVE will fail. Read/write access to the FPSIMD registers in
non-streaming mode is available via REGSET_FPR.
sve_set_common() already avoids allocating SVE storage when doing a FPSIMD
formatted write and allocating SME storage when doing a NT_ARM_SVE write so
we change the function to validate the new case and skip setting a vector
length for it.
The aim is to make a minimally invasive change, no operation that would
previously have succeeded will be affected, and we use a previously
defined interface in new circumstances rather than define completely new
ABI.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: David Spickett <david.spickett@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
With commit 1204777867e8 ("s390/debug: keep debug data on resize")
the behavior of a debug area resize operation was changed. Update the
associated documentation to reflect this change.
Fixes: 1204777867e8 ("s390/debug: keep debug data on resize")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
|
|
Add documentation for Intel thermal throttling reporting events.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment, file name change, minor edits ]
Link: https://patch.msgid.link/20251113212104.221632-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
vfs_mkdir() already drops the reference to the dentry on failure but it
leaves the parent locked.
This complicates end_creating() which needs to unlock the parent even
though the dentry is no longer available.
If we change vfs_mkdir() to unlock on failure as well as releasing the
dentry, we can remove the "parent" arg from end_creating() and simplify
the rules for calling it.
Note that cachefiles_get_directory() can choose to substitute an error
instead of actually calling vfs_mkdir(), for fault injection. In that
case it needs to call end_creating(), just as vfs_mkdir() now does on
error.
ovl_create_real() will now unlock on error. So the conditional
end_creating() after the call is removed, and end_creating() is called
internally on error.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-15-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
Linus Torvalds
Rafael J. Wysocki
Catalin Marinas
Pengfei Li
Gaurav Kohli
Hao-Wen Ting
Ulf Hansson
George Moussalem
Zenon Xiu
Christoph Hellwig
Frank Li
Babu Moger
Srinivas Pandruvada
Rob Herring (Arm)
Peter Hutterer
Mark Brown
Peter Oberparleiter
NeilBrown