aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth (follow)
AgeCommit message (Collapse)AuthorFilesLines
6 daystreewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar5-6/+6
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-30Bluetooth: hci_qca: move the SoC type check to the right placeBartosz Golaszewski1-7/+7
Commit 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") accidentally changed the prevous behavior where power control would be disabled without the BT_EN GPIO only on QCA_WCN6750 and QCA_WCN6855 while also getting the error check wrong. We should treat every IS_ERR() return value from devm_gpiod_get_optional() as a reason to bail-out while we should only set power_ctrl_enabled to false on the two models mentioned above. While at it: use dev_err_probe() to save a LOC. Cc: stable@vger.kernel.org Fixes: 3d05fc82237a ("Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Hsin-chen Chuang <chharry@chromium.org> Reviewed-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-30Bluetooth: btnxpuart: Fix missing devm_request_irq() return value checkKrzysztof Kozlowski1-0/+2
Return value of devm_request_irq() must be checked (function is even annotated) and without it clang W=1 complains: btnxpuart.c:494:6: error: unused variable 'ret' [-Werror,-Wunused-variable] Setting up wakeup IRQ handler is not really critical, because the handler is empty, so just log the informational message so user could submit proper bug report and silences the clang warning. Fixes: c50b56664e48 ("Bluetooth: btnxpuart: Implement host-wakeup feature") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-22Bluetooth: btintel: Check dsbr size from EFI variableKees Cook1-8/+2
Since the size of struct btintel_dsbr is already known, we can just start there instead of querying the EFI variable size. If the final result doesn't match what we expect also fail. This fixes a stack buffer overflow when the EFI variable is larger than struct btintel_dsbr. Reported-by: zepta <z3ptaa@gmail.com> Closes: https://lore.kernel.org/all/CAPBS6KoaWV9=dtjTESZiU6KK__OZX0KpDk-=JEH8jCHFLUYv3Q@mail.gmail.com Fixes: eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-22Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922Liwei Sun1-0/+2
A new variant of MT7922 wireless device has been identified. The device introduces itself as MEDIATEK MT7922, so treat it as MediaTek device. With this patch, btusb driver works as expected: [ 3.151162] Bluetooth: Core ver 2.22 [ 3.151185] Bluetooth: HCI device and connection manager initialized [ 3.151189] Bluetooth: HCI socket layer initialized [ 3.151191] Bluetooth: L2CAP socket layer initialized [ 3.151194] Bluetooth: SCO socket layer initialized [ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512 [ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.676637] Bluetooth: BNEP filters: protocol multicast [ 4.676640] Bluetooth: BNEP socket layer initialized [ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs [ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00 [ 5.619204] Bluetooth: hci0: AOSP quality report is supported [ 5.619301] Bluetooth: MGMT ver 1.23 [ 6.741247] Bluetooth: RFCOMM TTY layer initialized [ 6.741258] Bluetooth: RFCOMM socket layer initialized [ 6.741261] Bluetooth: RFCOMM ver 1.11 lspci output: 04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter USB information: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3584 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Liwei Sun <sunliweis@126.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-22Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handlingEn-Wei Wu1-58/+40
Use skb_pull() and skb_pull_data() to safely parse QCA dump packets. This avoids direct pointer math on skb->data, which could lead to invalid access if the packet is shorter than expected. Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925Jiande Lu1-0/+2
Add VID 13d3 & PID 3630 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3630 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btintel_pcie: Dump debug registers on errorChandrashekar Devegowda2-1/+149
Dumping debug registers on GP1 MSIx and error conditions, such as TX completion timeout, aiding in understanding the controller's state during errors. The register dump includes: - Boot stage - IPC control - IPC status - Mailbox registers HCI traces: = Vendor Diagnostic (len 199) 2d 2d 2d 2d 20 44 75 6d 70 20 6f 66 20 64 65 62 ---- Dump of deb 75 67 20 72 65 67 69 73 74 65 72 73 20 2d 2d 2d ug registers --- 62 6f 6f 74 20 73 74 61 67 65 3a 20 30 78 61 30 boot stage: 0xa0 66 61 30 30 34 37 69 70 63 20 73 74 61 74 75 73 fa0047ipc status 3a 20 30 78 30 30 30 30 30 30 30 34 69 70 63 20 : 0x00000004ipc 63 6f 6e 74 72 6f 6c 3a 20 30 78 30 30 30 30 30 control: 0x00000 30 30 30 69 70 63 20 73 6c 65 65 70 20 63 6f 6e 000ipc sleep con 74 72 6f 6c 3a 20 30 78 30 30 30 30 30 30 30 30 trol: 0x00000000 6d 62 6f 78 20 73 74 61 74 75 73 3a 20 30 78 30 mbox status: 0x0 30 30 30 30 30 30 30 72 78 71 3a 20 63 72 5f 74 0000000rxq: cr_t 69 61 3a 20 37 20 63 72 5f 68 69 61 3a 20 37 74 ia: 7 cr_hia: 7t 78 71 3a 20 63 72 5f 74 69 61 3a 20 36 20 63 72 xq: cr_tia: 6 cr 5f 68 69 61 3a 20 36 _hia: 6 Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Revert "Bluetooth: btusb: add sysfs attribute to control USB alt setting"Hsin-chen Chuang1-33/+1
This reverts commit b16b327edb4d030fb4c8fe38c7d299074d47ee3f. The sysfs node introduced by this patch could potentially race with user space. The original motivation - Support configuring altsetting from the user space will be added by another series. Cc: chromeos-bluetooth-upstreaming@chromium.org Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Revert "Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL"Hsin-chen Chuang2-53/+0
This reverts commit 75ddcd5ad40ecd9fbc9f5a7a2ed0e1e74921db3c. This patch doesn't work quite well - It's observed that with this patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. Cc: chromeos-bluetooth-upstreaming@chromium.org Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add HCI Drv commands for configuring altsettingHsin-chen Chuang1-1/+74
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out SCO data through USB Bluetooth chips, it's observed that with the patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. To address the issue above one needs to reset the altsetting back to zero when there is no active SCO connection, which is the same as the BlueZ behavior, and another benefit is the bus doesn't need to reserve bandwidth when no SCO connection. This patch adds "Supported Altsettings" and "Switch Altsetting" commands that allow the user space program to configure the altsetting freely. This patch is tested on ChromeOS devices. The USB Bluetooth models (CVSD, TRANS alt3, and TRANS alt6) could pass the stress HFP test narrow band speech and wide band speech. Cc: chromeos-bluetooth-upstreaming@chromium.org Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting") Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: Introduce HCI Driver protocolHsin-chen Chuang1-6/+63
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out SCO data through USB Bluetooth chips, it's observed that with the patch HFP is flaky on most of the existing USB Bluetooth controllers: Intel chips sometimes send out no packet for Transparent codec; MTK chips may generate SCO data with a wrong handle for CVSD codec; RTK could split the data with a wrong packet size for Transparent codec; ... etc. To address the issue above one needs to reset the altsetting back to zero when there is no active SCO connection, which is the same as the BlueZ behavior, and another benefit is the bus doesn't need to reserve bandwidth when no SCO connection. This patch adds the infrastructure that allow the user space program to talk to Bluetooth drivers directly: - Define the new packet type HCI_DRV_PKT which is specifically used for communication between the user space program and the Bluetooth drviers - hci_send_frame intercepts the packets and invokes drivers' HCI Drv callbacks (so far only defined for btusb) - 2 kinds of events to user space: Command Status and Command Complete, the former simply returns the status while the later may contain additional response data. Cc: chromeos-bluetooth-upstreaming@chromium.org Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting") Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btnxpuart: Implement host-wakeup featureNeeraj Sanjay Kale1-6/+52
This implements host wakeup feature by reading the device tree property wakeup-source and 'wakeup' interrupt, and nxp,wakeout-pin, and configuring it as a FALLING EDGE triggered interrupt. When host is suspended, a trigger from the WAKE_OUT pin of the controller wakes it up. To enable this feature, both device tree properties are needed to be defined. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850WangYuli1-0/+1
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b850 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Co-developed-by: Hao Li <lihao1@uniontech.com> Signed-off-by: Hao Li <lihao1@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: hci_uart: Remove unnecessary NULL check before release_firmware()Chen Ni1-2/+1
release_firmware() checks for NULL pointers internally. Remove unneeded NULL check for fmw here. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btmtksdio: Fix wakeup source leaks on device unbindKrzysztof Kozlowski1-1/+1
Device can be unbound or probe can fail, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbindKrzysztof Kozlowski1-1/+3
Device can be unbound or probe can fail, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btintel_pcie: Do not generate coredump for diagnostic eventsKiran K3-18/+1
All Intel diagnostic events are part of HCI traces and there is no need to generate coredump for the same. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21Bluetooth: btusb: Add new VID/PID 13d3/3613 for MT7925Youn MÉLOIS1-0/+2
Add VID 13d3 & PID 3613 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3613 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Youn Melois <youn@melois.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-25Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX pathsKiran K1-5/+19
Due to a hardware issue, there is a possibility that the driver may miss an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are independent, when a TX MSIx interrupt occurs, the driver can check the RX queue for any pending data and process it if present. The same approach applies to the RX path. Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-25Bluetooth: btmtksdio: Do close if SDIO card removed without closeChris Lu1-2/+6
To prevent Bluetooth SDIO card from be physically removed suddenly, driver needs to ensure btmtksdio_close is called before btmtksdio_remove to disable interrupts and txrx workqueue. Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-25Bluetooth: btmtksdio: Check function enabled before doing closeChris Lu1-0/+4
Check BTMTKSDIO_FUNC_ENABLED flag before doing close to prevent btmtksdio_close been called twice. Fixes: 6ac4233afb9a ("Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-25Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()En-Wei Wu1-28/+73
A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access. Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-25Bluetooth: btintel_pcie: Avoid redundant buffer allocationKiran K1-21/+12
Reuse the skb buffer provided by the PCIe driver to pass it onto the stack, instead of copying it to a new skb. Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-16Bluetooth: vhci: Avoid needless snprintf() callsKees Cook1-5/+5
Avoid double-copying of string literals. Use a "const char *" for each string instead of copying from .rodata into stack and then into the skb. We can go directly from .rodata to the skb. This also works around a Clang bug (that has since been fixed[1]). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401250927.1poZERd6-lkp@intel.com/ Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support") Link: https://github.com/llvm/llvm-project/commit/ea2e66aa8b6e363b89df66dc44275a0d7ecd70ce [1] Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-11Merge tag 'for-net-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski3-11/+14
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btrtl: Prevent potential NULL dereference - qca: fix NV variant for one of WCN3950 SoCs - l2cap: Check encryption key size on incoming connection - hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address - btnxpuart: Revert baudrate change in nxp_shutdown - btnxpuart: Add an error message if FW dump trigger fails - increment TX timestamping tskey always for stream sockets * tag 'for-net-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: l2cap: Check encryption key size on incoming connection Bluetooth: btnxpuart: Add an error message if FW dump trigger fails Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdown Bluetooth: increment TX timestamping tskey always for stream sockets Bluetooth: qca: fix NV variant for one of WCN3950 SoCs Bluetooth: btrtl: Prevent potential NULL dereference Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address ==================== Link: https://patch.msgid.link/20250410173542.625232-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Bluetooth: btnxpuart: Add an error message if FW dump trigger failsNeeraj Sanjay Kale1-1/+3
This prints an error message if the FW Dump trigger command fails. This scenario is mainly observed in legacy chipsets 8987 and 8997 and also IW416, where this feature is unavailable due to memory constraints. Fixes: 998e447f443f ("Bluetooth: btnxpuart: Add support for HCI coredump feature") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdownNeeraj Sanjay Kale1-9/+8
This reverts the change baudrate logic in nxp_shutdown. Earlier, when the driver was removed, it restored the controller baudrate to fw_init_baudrate, so that on re-loading the driver, things work fine. However, if the driver was removed while hci0 interface is down, the change baudrate vendor command could not be sent by the driver. When the driver was re-loaded, host and controller baudrate would be mismatched and hci initialization would fail. The only way to recover would be to reboot the system. This issue was fixed by moving the restore baudrate logic from nxp_serdev_remove() to nxp_shutdown(). This fix however caused another issue with the command "hciconfig hci0 reset", which makes hci0 DOWN and UP immediately. Running "bluetoothctl power off" and "bluetoothctl power on" in a tight loop works fine. To maintain support for "hciconfig reset" command, the above mentioned fix is reverted. Fixes: 6fca6781d19d ("Bluetooth: btnxpuart: Move vendor specific initialization to .post_init") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: qca: fix NV variant for one of WCN3950 SoCsDmitry Baryshkov1-1/+1
The QCA_WCN3950_SOC_ID_S should be using qca/cmnv13s.bin, rather than qca/cmnv13u.bin file. Correct the variant suffix to be used for this SoC ID. Fixes: d5712c511cb3 ("Bluetooth: qca: add WCN3950 support") Reported-by: Wojciech Slenska <wsl@trackunit.com> Closes: https://github.com/qualcomm-linux/meta-qcom/pull/817#discussion_r2022866431 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: btrtl: Prevent potential NULL dereferenceDan Carpenter1-0/+2
The btrtl_initialize() function checks that rtl_load_file() either had an error or it loaded a zero length file. However, if it loaded a zero length file then the error code is not set correctly. It results in an error pointer vs NULL bug, followed by a NULL pointer dereference. This was detected by Smatch: drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR' Fixes: 26503ad25de8 ("Bluetooth: btrtl: split the device initialization into smaller parts") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner4-11/+11
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-25Bluetooth: btnxpuart: Fix kernel panic during FW releaseNeeraj Sanjay Kale1-2/+4
This fixes a kernel panic seen during release FW in a stress test scenario where WLAN and BT FW download occurs simultaneously, and due to a HW bug, chip sends out only 1 bootloader signatures. When driver receives the bootloader signature, it enters FW download mode, but since no consequtive bootloader signatures seen, FW file is not requested. After 60 seconds, when FW download times out, release_firmware causes a kernel panic. [ 2601.949184] Unable to handle kernel paging request at virtual address 0000312e6f006573 [ 2601.992076] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111802000 [ 2601.992080] [0000312e6f006573] pgd=0000000000000000, p4d=0000000000000000 [ 2601.992087] Internal error: Oops: 0000000096000021 [#1] PREEMPT SMP [ 2601.992091] Modules linked in: algif_hash algif_skcipher af_alg btnxpuart(O) pciexxx(O) mlan(O) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce snd_soc_fsl_easrc snd_soc_fsl_asoc_card imx8_media_dev(C) snd_soc_fsl_micfil polyval_generic snd_soc_fsl_xcvr snd_soc_fsl_sai snd_soc_imx_audmux snd_soc_fsl_asrc snd_soc_imx_card snd_soc_imx_hdmi snd_soc_fsl_aud2htx snd_soc_fsl_utils imx_pcm_dma dw_hdmi_cec flexcan can_dev [ 2602.001825] CPU: 2 PID: 20060 Comm: hciconfig Tainted: G C O 6.6.23-lts-next-06236-gb586a521770e #1 [ 2602.010182] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 2602.010185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2602.010191] pc : _raw_spin_lock+0x34/0x68 [ 2602.010201] lr : free_fw_priv+0x20/0xfc [ 2602.020561] sp : ffff800089363b30 [ 2602.020563] x29: ffff800089363b30 x28: ffff0000d0eb5880 x27: 0000000000000000 [ 2602.020570] x26: 0000000000000000 x25: ffff0000d728b330 x24: 0000000000000000 [ 2602.020577] x23: ffff0000dc856f38 [ 2602.033797] x22: ffff800089363b70 x21: ffff0000dc856000 [ 2602.033802] x20: ff00312e6f006573 x19: ffff0000d0d9ea80 x18: 0000000000000000 [ 2602.033809] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaad80dd480 [ 2602.083320] x14: 0000000000000000 x13: 00000000000001b9 x12: 0000000000000002 [ 2602.083326] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff800089363a30 [ 2602.083333] x8 : ffff0001793d75c0 x7 : ffff0000d6dbc400 x6 : 0000000000000000 [ 2602.083339] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000001 [ 2602.083346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ff00312e6f006573 [ 2602.083354] Call trace: [ 2602.083356] _raw_spin_lock+0x34/0x68 [ 2602.083364] release_firmware+0x48/0x6c [ 2602.083370] nxp_setup+0x3c4/0x540 [btnxpuart] [ 2602.083383] hci_dev_open_sync+0xf0/0xa34 [ 2602.083391] hci_dev_open+0xd8/0x178 [ 2602.083399] hci_sock_ioctl+0x3b0/0x590 [ 2602.083405] sock_do_ioctl+0x60/0x118 [ 2602.083413] sock_ioctl+0x2f4/0x374 [ 2602.091430] __arm64_sys_ioctl+0xac/0xf0 [ 2602.091437] invoke_syscall+0x48/0x110 [ 2602.091445] el0_svc_common.constprop.0+0xc0/0xe0 [ 2602.091452] do_el0_svc+0x1c/0x28 [ 2602.091457] el0_svc+0x40/0xe4 [ 2602.091465] el0t_64_sync_handler+0x120/0x12c [ 2602.091470] el0t_64_sync+0x190/0x194 Fixes: e3c4891098c8 ("Bluetooth: btnxpuart: Handle FW Download Abort scenario") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7Neeraj Sanjay Kale1-18/+43
This handles the scenario where the driver receives an error code after sending cmd5 or cmd7 in the bootloader signature during FW download. The bootloader error code is handled by the driver and FW offset is corrected accordingly, and the cmd5 or cmd7 is re-sent to the controller in case of CRC error. Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add correct bootloader error codesNeeraj Sanjay Kale1-22/+35
This corrects the bootloader error codes for NXP chipsets. Since we have a common handling for all error codes, there is no backward compatibility issue. Added error handling for CRC error code in V3 bootloader signature. Fixes: 27489364299a ("Bluetooth: btnxpuart: Add handling for boot-signature timeout errors") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25t blameBluetooth: btintel: Fix leading white spaceKiran K2-2/+2
Remove the unwanted leading whitespace. Fixes: 6ed83047389c ("Bluetooth: btintel_pcie: Setup buffers for firmware traces") Fixes: bb3569ac3604 ("Bluetooth: btintel: Add DSBR support for ScP") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel: Add support to configure TX powerVijay Satija2-0/+356
BRDS - Bluetooth Regulatory Domain Specific absorption rate Bluetooth has regulatory limitations which prohibit or allow usage of certain bands or channels as well as limiting Tx power. The Tx power values can be configured in ACPI table. This patch reads from ACPI entry configures the controller accordingly. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removalSean Wang1-1/+2
Ensure interrupts are not re-enabled when the IRQ handler has already been removed. This prevents unexpected IRQ handler execution due to stale or unhandled interrupts. Modify btmtksdio_txrx_work to check if bdev->func->irq_handler exists before calling sdio_writel to enable interrupts. Co-developed-by: Pedro Tsai <pedro.tsai@mediatek.com> Signed-off-by: Pedro Tsai <pedro.tsai@mediatek.com> Co-developed-by: Felix Freimann <felix.freimann@mediatek.com> Signed-off-by: Felix Freimann <felix.freimann@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btmtk: Remove the resetting step before downloading the fwHao Qin1-10/+0
Remove the resetting step before downloading the fw, as it may cause other usb devices to fail to initialise when connected during boot on kernels 6.11 and newer. Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: hci_vhci: Mark Sync Flow Control as supportedLuiz Augusto von Dentz1-0/+1
This sets HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED which indicates that controllers created by vhci driver support Sync Flow Control. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pci: Fix build warningLuiz Augusto von Dentz1-14/+0
This fixes the following warning: drivers/bluetooth/btintel_pcie.c:695:20: warning: unused function 'btintel_pcie_in_rom' [-Wunused-function] 695 | static inline bool btintel_pcie_in_rom(struct btintel_pcie_data *data) | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Trigger device coredump on hardware exceptionKiran K1-0/+6
Driver dumps device core dump on firmware exception. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add support to set BD addressNeeraj Sanjay Kale1-5/+54
This adds support for setting BD address during hci registration. NXP FW does not allow vendor commands unless it receives a reset command after FW download and initialization done. As a workaround, the .set_bdaddr callback function will first send the HCI reset command, followed by the actual vendor command to set BD address. The driver checks for the local-bd-address property in device tree, and if preset, it sets the HCI_QUIRK_USE_BDADDR_PROPERTY quirk. With this quirk set, the driver's set_bdaddr callback function is called after FW download is complete and before HCI initialization, which sends the hci reset and 3f 22 commands. During initialization, kernel reads the newly set BD address from the controller. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no> Signed-off-by: Kristian Krohn <kristian.krohn@remarkable.no> Tested-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Add support for HCI coredump featureNeeraj Sanjay Kale1-15/+132
This adds support for Bluetooth Coredump feature to BTNXPUART driver to collect FW dumps on demand, or in case FW goes in a bad state. To trigger manual FW dump, following command can be used: echo 1 > /sys/class/bluetooth/hci0/device/coredump Once FW dump is complete, it can be written to a file: cat /sys/class/bluetooth/hci0/devcoredump/data > fw_dump While FW dump is in progress, any HCI command will return -EBUSY. After FW dump is complete, driver will give HCI_NXP_IND_RESET command which soft-resets the chip, allowing FW re-download. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btnxpuart: Move vendor specific initialization to .post_initNeeraj Sanjay Kale1-18/+27
This moves change baudrate and power save vendor commands from nxp_setup() to nxp_post_init(). This also moves the baudrate restore logic from nxp_serdev_remove() to nxp_shutdown() which ensure baudrate is restored even when HCI dev is down, preventing baudrate mismatch between host and controller when device is probed again next time. In case of removal when the hdev is up and running, we have to call the shutdown procedure explicitly before unregistering the hdev. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Co-developed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Add support for device coredumpKiran K3-7/+291
1. Driver registers device coredump callback 2. Dumps firmware traces as part of coredump Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btusb: Fix regression in the initialization of fake Bluetooth controllersPedro Nishiyama1-0/+2
Set HCI_READ_VOICE_SETTING and HCI_READ_PAGE_SCAN_TYPE as broken. Once the min/max length of the commands began to be asserted, these fake controllers can no longer be initialized because they return a smaller report for these commands. This affects various fake controllers reusing the 0A12:0001 VID/PID. Fixes: c8992cffbe74 ("Bluetooth: hci_event: Use of a function table to handle Command Complete") Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Read hardware exception dataKiran K3-1/+247
On hardware error, controller writes hardware error event and optional vendor specific hci events in device memory in TLV format and raises MSIX interrupt. Driver reads the device memory and passes the events to the stack for further processing. Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Setup buffers for firmware tracesKiran K2-0/+121
This patch allocates the host memory which is used by controller to dump the firmware traces. The memory needs to be shared with controller via context information. Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-25Bluetooth: qca: add WCN3950 supportDmitry Baryshkov3-0/+43
WCN3950 is another example of the WCN39xx BT/WiFI family of chips. It requires different firmware files and has different current requirements, so add it as a separate SoC type. The firmware for these chips has been recently added to the linux-firmware repository and will be a part of the upcoming release: - qca/cmbtfw12.tlv - qca/cmbtfw13.tlv - qca/cmnv12.bin - qca/cmnv13.bin - qca/cmnv13s.bin - qca/cmnv13t.bin Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: qca: simplify WCN399x NVM loadingDmitry Baryshkov1-7/+6
The WCN399x code has two separate cases for loading the NVM data. In preparation to adding support for WCN3950, which also requires similar quirk, split the "variant" to be specified explicitly and merge two snprintfs into a single one. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.