aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-11-26drm/amdgpu: fix cyan_skillfish2 gpu info fw handlingAlex Deucher1-0/+2
If the board supports IP discovery, we don't need to parse the gpu info firmware. Backport to 6.18. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4721 Fixes: fa819e3a7c1e ("drm/amdgpu: add support for cyan skillfish gpu_info") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5427e32fa3a0ba9a016db83877851ed277b065fb)
2025-11-26drm/amdgpu: attach tlb fence to the PTs updatePrike Liang1-1/+1
Ensure the userq TLB flush is emitted only after the VM update finishes and the PT BOs have been annotated with bookkeeping fences. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f3854e04b708d73276c4488231a8bd66d30b4671) Cc: stable@vger.kernel.org
2025-11-26drm/amd/display: Increase EDID read retriesMario Limonciello (AMD)1-4/+4
[WHY] When monitor is still booting EDID read can fail while DPCD read is successful. In this case no EDID data will be returned, and this could happen for a while. [HOW] Increase number of attempts to read EDID in dm_helpers_read_local_edid() to 25. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a76d6f2c76c3abac519ba753e2723e6ffe8e461c) Cc: stable@vger.kernel.org
2025-11-26drm/amd/display: Don't change brightness for disabled connectorsMario Limonciello (AMD)1-0/+15
[WHY] When a laptop lid is closed the connector is disabled but userspace can still try to change brightness. This doesn't work because the panel is turned off. It will eventually time out, but there is a lot of stutter along the way. [How] Iterate all connectors to check whether the matching one for the backlight index is enabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f6eeab30323d1174a4cc022e769d248fe8241304) Cc: stable@vger.kernel.org
2025-11-26drm/amd/display: Check NULL before accessingAlex Hung1-3/+8
[WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom #8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 621e55f1919640acab25383362b96e65f2baea3c) Cc: stable@vger.kernel.org
2025-11-26Revert "drm/amd/display: Move setup_stream_attribute"Alex Deucher5-12/+3
This reverts commit 2681bf4ae8d24df950138b8c9ea9c271cd62e414. This results in a blank screen on the HDMI port on some systems. Revert for now so as not to regress 6.18, can be addressed in 6.19 once the issue is root caused. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652 Cc: Sunpeng.Li@amd.com Cc: ivan.lipski@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d0e9de7a81503cdde37fb2d37f1d102f9e0f38fb)
2025-11-24drm/amd/amdgpu: reserve vm invalidation engine for uni_mesMichael Chen1-0/+3
Reserve vm invalidation engine 6 when uni_mes enabled. It is used in processing tlb flush request from host. Signed-off-by: Michael Chen <michael.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 873373739b9b150720ea2c5390b4e904a4d21505) Cc: stable@vger.kernel.org
2025-11-19drm/amdgpu: Add sriov vf check for VCN per queue reset support.Shikang Fan2-2/+4
Add SRIOV check when setting VCN ring's supported reset mask. Signed-off-by: Shikang Fan <shikang.fan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ee9b603ad43f9870eb75184f9fb0a84f8c3cc852) Cc: stable@vger.kernel.org
2025-11-19drm/amdgpu/ttm: Fix crash when handling MMIO_REMAP in PDE flagsSrinivasan Shanmugam1-1/+1
The MMIO_REMAP BO is a special 4K IO page that does not have a ttm_tt behind it. However, amdgpu_ttm_tt_pde_flags() was treating it like normal TT/doorbell/preempt memory and unconditionally accessed ttm->caching. For the MMIO_REMAP BO, ttm is NULL, so this leads to a NULL pointer dereference when computing PDE flags. Fix this by checking that ttm is non-NULL before reading ttm->caching. This prevents the crash for MMIO_REMAP and also makes the code more defensive if other BOs ever come through without a ttm_tt. Fixes: fb5a52dbe9fe ("drm/amdgpu: Implement TTM handling for MMIO_REMAP placement") Suggested-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Tested-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0db94da5a0a1cacda080b9ec8425fcbe4babc141)
2025-11-19drm/amdgpu/vm: Check PRT uAPI flag instead of PTE flagTimur Kristóf1-2/+2
This fixes sparse mappings (aka. partially resident textures). Check the correct flags. Since a recent refactor, the code works with uAPI flags (for mapping buffer objects), and not PTE (page table entry) flags. Fixes: 6716a823d18d ("drm/amdgpu: rework how PTE flags are generated v3") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8feeab26c80635b802f72b3ed986c693ff8f3212)
2025-11-19drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabledYifan Zha1-2/+2
[Why] Accoreding to CP updated to RS64 on gfx11, WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW. That packet is used for MCBP on F32 based system. So it would lead to incorrect GRBM write and FW is not handling that extra case correctly. [How] With gfx11 rs64 enabled, skip emit de meta data. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8366cd442d226463e673bed5d199df916f4ecbcf) Cc: stable@vger.kernel.org
2025-11-19drm/amd: Skip power ungate during suspend for VPEMario Limonciello1-1/+2
During the suspend sequence VPE is already going to be power gated as part of vpe_suspend(). It's unnecessary to call during calls to amdgpu_device_set_pg_state(). It actually can expose a race condition with the firmware if s0i3 sequence starts as well. Drop these calls. Cc: Peyton.Lee@amd.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2a6c826cfeedd7714611ac115371a959ead55bda) Cc: stable@vger.kernel.org
2025-11-18drm/amd/display: Fix pbn to kbps ConversionFangzhi Zuo1-36/+23
[Why] Existing routine has two conversion sequence, pbn_to_kbps and kbps_to_pbn with margin. Non of those has without-margin calculation. kbps_to_pbn with margin conversion includes fec overhead which has already been included in pbn_div calculation with 0.994 factor considered. It is a double counted fec overhead factor that causes potential bw loss. [How] Add without-margin calculation. Fix fec overhead double counted issue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e0dec00f3d05e8c0eceaaebfdca217f8d10d380c) Cc: stable@vger.kernel.org
2025-11-18drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5Ivan Lipski1-0/+8
[Why] On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5, while it's still powered on, the cached cursor_state (dpp_base->pos.cur0_ctl.bits.cur0_enable) and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a double cursor in full screen with non-native scaling. [How] Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673 Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 79b3c037f972dcb13e325a8eabfb8da835764e15) Cc: stable@vger.kernel.org
2025-11-18drm/amd/display: Add an HPD filter for HDMIIvan Lipski2-0/+144
[Why] Some monitors perform rapid “autoscan” HPD re‑assertions right after a disconnect or powersaving mode enablement. These appear as a quick disconnect→reconnect with an identical EDID. Since Linux has no HDMI hotplug detection (HPD) filter, these quick reconnects are seen as hotplug events, which can unintentionally wake a system with DPMS off. An example: https://gitlab.freedesktop.org/drm/amd/-/issues/2876 Such 'fake reconnects' are considered when the interval between a disconnect and a connect is within 1500ms (experimentally chosen using several monitors), and the two connections have the same EDID. [How] Implement a time-based debounce mechanism: 1. On HDMI disconnect detection, instead of immediately processing the HPD event, save the current sink and schedule delayed work (default 1500ms) 2. If another HDMI disconnect HPD event arrives during the debounce period, it reschedules the pending work, ensuring only the final state is processed. 3. When the debounce timer expires, re-detect the display and compare the new sink with the cached one using EDID comparison. 4. If sinks match (same EDID), this was a spontaneous HPD toggle: - Update connector state internally - Skip hotplug event to prevent desktop rearrangement If sinks differ, this was a real display change: - Process normally with the hotplug event The debounce delay is configurable via module parameter 'hdmi_hpd_debounce_delay_ms'. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2876 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c918e75e1ed95be76f8e3156a411188f650fe03f)
2025-11-18drm/amd/display: Increase DPCD read retriesMario Limonciello (AMD)1-1/+1
[Why] Empirical measurement of some monitors that fail to read EDID while booting shows that the number of retries with a 30ms delay between tries is as high as 16. [How] Increase number of retries to 20. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ad1c59ad7cf74ec06e32fe2c330ac1e957222288) Cc: stable@vger.kernel.org
2025-11-18drm/amd/display: Move sleep into each retry for retrieve_link_cap()Mario Limonciello (AMD)1-4/+5
[Why] When a monitor is booting it's possible that it isn't ready to retrieve link caps and this can lead to an EDID read failure: ``` [drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed. amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read. ``` [How] Rather than msleep once and try a few times, msleep each time. Should be no changes for existing working monitors, but should correct reading caps on a monitor that is slow to boot. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 669dca37b3348a447db04bbdcbb3def94d5997cc) Cc: stable@vger.kernel.org
2025-11-18drm/amd/display: Prevent Gating DTBCLK before It Is Properly LatchedFangzhi Zuo2-2/+4
[why] 1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes, gating DTBCLK causes the DP2 sink to lose its clock source. 2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk, but gates DTBCLK when either pix_clk or ref_dtbclk is zero. pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched, which can lead to DTBCLK being gated by mistake. [how] Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK; this is more accurate. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701 Fixes: 5949e7c4890c ("drm/amd/display: Enable Dynamic DTBCLK Switch") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d04eb0c402780ca037b62a6aecf23b863545ebca) Cc: stable@vger.kernel.org
2025-11-11drm/amdkfd: Fix GPU mappings for APU after prefetchHarish Kasiviswanathan1-0/+2
Fix the following corner case:- Consider a 2M huge page SVM allocation, followed by prefetch call for the first 4K page. The whole range is initially mapped with single PTE. After the prefetch, this range gets split to first page + rest of the pages. Currently, the first page mapping is not updated on MI300A (APU) since page hasn't migrated. However, after range split PTE mapping it not valid. Fix this by forcing page table update for the whole range when prefetch is called. Calling prefetch on APU doesn't improve performance. If all it deteriotes. However, functionality has to be supported. v2: Use apu_prefer_gtt as this issue doesn't apply to APUs with carveout VRAM v3: Simplify by setting the flag for all ASICs as it doesn't affect dGPU v4: Remove v2 and v3 changes. Force update_mapping when range is split at a size that is not aligned to prange granularity Suggested-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 076470b9f6f8d9c7c8ca73a9f054942a686f9ba7)
2025-11-11drm/amdkfd: relax checks for over allocation of save areaJonathan Kim1-6/+6
Over allocation of save area is not fatal, only under allocation is. ROCm has various components that independently claim authority over save area size. Unless KFD decides to claim single authority, relax size checks. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 15bd4958fe38e763bc17b607ba55155254a01f55) Cc: stable@vger.kernel.org
2025-11-11drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1Sathishkumar S1-0/+1
enable parse_cs callback for JPEG5_0_1. Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 547985579932c1de13f57f8bcf62cd9361b9d3d3) Cc: stable@vger.kernel.org
2025-11-11drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BOSultan Alsawaf1-0/+2
When the BO pointer provided to amdgpu_bo_create_kernel() points to non-NULL, amdgpu_bo_create_kernel() takes it as a hint to pin that address rather than allocate a new BO. This functionality is never desired for allocating ISP buffers. A new BO should always be created when isp_kernel_buffer_alloc() is called, per the description for isp_kernel_buffer_alloc(). Ensure this by zeroing *bo right before the amdgpu_bo_create_kernel() call. Fixes: 55d42f616976 ("drm/amd/amdgpu: Add helper functions for isp buffers") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 73c8c29baac7f0c7e703d92eba009008cbb5228e)
2025-11-11drm/amd/display: Allow VRR params change if unsynced with the streamIvan Lipski1-0/+11
[Why] When changing resolution (e.g., 4K → FHD) in mirror/clone mode with certain monitors, the monitor blanks and loses connection due to an early exit in vrr_settings_require_update(). The function only checks if VRR state, fixed refresh target, or min/max refresh rate range has changed. During mode changes, if the calculated min/max refresh values remain the same even though the stream's v_total changed, the function returns early without updating vrr_params.adjust.v_total_min/max, leaving the monitor's VRR timing parameters unsynced with the new mode, causing it to blank out. [How] Explicitly adjust VRR parameters to the stream's nominal v_total when VRR is supported, but inactive. Fixes: 6d31602a9f57 ("drm/amd/display: more liberal vmin/vmax update for freesync") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 607df8248a011524211ee34850345305a1913f9e)
2025-11-11drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_processJesse.Zhang1-2/+3
Fix a potential deadlock caused by inconsistent spinlock usage between interrupt and process contexts in the userq fence driver. The issue occurs when amdgpu_userq_fence_driver_process() is called from both: - Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process() - Process context: amdgpu_eviction_fence_suspend_worker() -> amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process() In interrupt context, the spinlock was acquired without disabling interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock is acquired in process context, the kernel detects inconsistent locking since the process context acquisition would enable interrupts while holding a lock previously acquired in interrupt context. Kernel log shows: [ 4039.310790] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 4039.310804] kworker/7:2/409 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 4039.310818] ffff9284e1bed000 (&fence_drv->fence_list_lock){?...}-{3:3}, [ 4039.310993] {IN-HARDIRQ-W} state was registered at: [ 4039.311004] lock_acquire+0xc6/0x300 [ 4039.311018] _raw_spin_lock+0x39/0x80 [ 4039.311031] amdgpu_userq_fence_driver_process.part.0+0x30/0x180 [amdgpu] [ 4039.311146] amdgpu_userq_fence_driver_process+0x17/0x30 [amdgpu] [ 4039.311257] gfx_v11_0_eop_irq+0x132/0x170 [amdgpu] Fix by using spin_lock_irqsave()/spin_unlock_irqrestore() to properly manage interrupt state regardless of calling context. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ded3ad780cf97a04927773c4600823b84f7f3cc2) Cc: stable@vger.kernel.org
2025-11-11drm/amdgpu: jump to the correct label on failurePierre-Eric Pelloux-Prayer1-1/+1
drm_sched_entity_init wasn't called yet, so the only thing to do is to release allocated memory. This doesn't fix any bug since entity is zero allocated and drm_sched_entity_fini does nothing in this case. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ec49374ccb8da86b465beaf09c367f3dfd648d8f)
2025-11-11drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfacesVitaly Prosyak1-0/+12
Certain multi-GPU configurations (especially GFX12) may hit data corruption when a DCC-compressed VRAM surface is shared across GPUs using peer-to-peer (P2P) DMA transfers. Such surfaces rely on device-local metadata and cannot be safely accessed through a remote GPU’s page tables. Attempting to import a DCC-enabled surface through P2P leads to incorrect rendering or GPU faults. This change disables P2P for DCC-enabled VRAM buffers that are contiguous and allocated on GFX12+ hardware. In these cases, the importer falls back to the standard system-memory path, avoiding invalid access to compressed surfaces. Future work could consider optional migration (VRAM→System→VRAM) if a performance regression is observed when `attach->peer2peer = false`. Tested on: - Dual RX 9700 XT (Navi4x) setup - GNOME and Wayland compositor scenarios - Confirmed no corruption after disabling P2P under these conditions v2: Remove check TTM_PL_VRAM & TTM_PL_FLAG_CONTIGUOUS. v3: simplify for upsteam and fix ip version check (Alex) Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9dff2bb709e6fbd97e263fd12bf12802d2b5a0cf) Cc: stable@vger.kernel.org
2025-11-06drm/amd/display: Enable mst when it's detected but yet to be initializedWayne Lin1-1/+9
[Why] drm_dp_mst_topology_queue_probe() is used under the assumption that mst is already initialized. If we connect system with SST first then switch to the mst branch during suspend, we will fail probing topology by calling the wrong API since the mst manager is yet to be initialized. [How] At dm_resume(), once it's detected as mst branc connected, check if the mst is initialized already. If not, call dm_helpers_dp_mst_start_top_mgr() instead to initialize mst V2: Adjust the commit msg a bit Fixes: bc068194f548 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT") Cc: Fangzhi Zuo <jerry.zuo@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 62320fb8d91a0bddc44a228203cfa9bfbb5395bd) Cc: stable@vger.kernel.org
2025-11-06drm/amdgpu: Fix wait after reset sequence in S3Lijo Lazar2-3/+32
For a mode-1 reset done at the end of S3 on PSPv11 dGPUs, only check if TOS is unloaded. Fixes: 32f73741d6ee ("drm/amdgpu: Wait for bootloader after PSPv11 reset") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4649 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1ad25fd272753db14c5d1cc8c68e20ce01f3f888)
2025-11-06drm/amd: Fix suspend failure with secure display TAMario Limonciello1-1/+4
commit c760bcda83571 ("drm/amd: Check whether secure display TA loaded successfully") attempted to fix extra messages, but failed to port the cleanup that was in commit 5c6d52ff4b61e ("drm/amd: Don't try to enable secure display TA multiple times") to prevent multiple tries. Add that to the failure handling path even on a quick failure. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679 Fixes: c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4104c0a454f6a4d1e0d14895d03c0e7bdd0c8240)
2025-11-06drm/amdgpu: fix gpu page fault after hibernation on PF passthroughSamuel Zhang2-2/+5
On PF passthrough environment, after hibernate and then resume, coralgemm will cause gpu page fault. Mode1 reset happens during hibernate, but partition mode is not restored on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right after resume. When CP access the MQD BO, wrong stride size is used, this will cause out of bound access on the MQD BO, resulting page fault. The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called when resume from a hibernation. KFD resume is called separately during a reset recovery or resume from suspend sequence. Hence it's not required to be called as part of partition switch. Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a)
2025-11-04drm/amd/display: Fix NULL deref in debugfs odm_combine_segmentsRong Zhang1-1/+2
When a connector is connected but inactive (e.g., disabled by desktop environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading odm_combine_segments causes kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 16 UID: 0 PID: 26474 Comm: cat Not tainted 6.17.0+ #2 PREEMPT(lazy) e6a17af9ee6db7c63e9d90dbe5b28ccab67520c6 Hardware name: LENOVO 21Q4/LNVNB161216, BIOS PXCN25WW 03/27/2025 RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu] Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00> RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286 RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8 RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0 R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08 R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> seq_read_iter+0x125/0x490 ? __alloc_frozen_pages_noprof+0x18f/0x350 seq_read+0x12c/0x170 full_proxy_read+0x51/0x80 vfs_read+0xbc/0x390 ? __handle_mm_fault+0xa46/0xef0 ? do_syscall_64+0x71/0x900 ksys_read+0x73/0xf0 do_syscall_64+0x71/0x900 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f44d4031687 Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00> RSP: 002b:00007ffdb4b5f0b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007f44d3f9f740 RCX: 00007f44d4031687 RDX: 0000000000040000 RSI: 00007f44d3f5e000 RDI: 0000000000000003 RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007f44d3f5e000 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000040000 </TASK> Modules linked in: tls tcp_diag inet_diag xt_mark ccm snd_hrtimer snd_seq_dummy snd_seq_midi snd_seq_oss snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device x> snd_hda_codec_atihdmi snd_hda_codec_realtek_lib lenovo_wmi_helpers think_lmi snd_hda_codec_generic snd_hda_codec_hdmi snd_soc_core kvm snd_compress uvcvideo sn> platform_profile joydev amd_pmc mousedev mac_hid sch_fq_codel uinput i2c_dev parport_pc ppdev lp parport nvme_fabrics loop nfnetlink ip_tables x_tables dm_cryp> CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu] Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00> RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286 RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8 RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0 R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08 R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0 PKRU: 55555554 Fix this by checking pipe_ctx->stream_res.tg before dereferencing. Fixes: 07926ba8a44f ("drm/amd/display: Add debugfs interface for ODM combine info") Signed-off-by: Rong Zhang <i@rong.moe> Reviewed-by: Mario Limoncello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f19bbecd34e3c15eed7e5e593db2ac0fc7a0e6d8) Cc: stable@vger.kernel.org
2025-11-04drm/amdkfd: Don't clear PT after process killedPhilip Yang1-0/+4
If process is killed. the vm entity is stopped, submit pt update job will trigger the error message "*ERROR* Trying to push to a killed entity", job will not execute. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 10c382ec6c6d1e11975a11962bec21cba6360391) Cc: stable@vger.kernel.org
2025-11-04drm/amdgpu/smu: Handle S0ix for vangoghAlex Deucher2-0/+9
Fix the flows for S0ix. There is no need to stop rlc or reintialize PMFW in S0ix. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reported-by: Antheas Kapenekakis <lkml@antheas.dev> Tested-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fd39b5a5830d8f2553e0c09d4d50bdff28b10080) Cc: <stable@vger.kernel.org> # c81f5cebe849: drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend() Cc: <stable@vger.kernel.org>
2025-11-04drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()Alex Deucher3-24/+0
For S3 on vangogh, PMFW needs to be notified before the driver powers down RLC. This already happens in smu_disable_dpms() so drop the superfluous call in amdgpu_device_suspend(). Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 960e30a61e1a7ca5341a6cf9481e770e1cda24aa)
2025-11-04drm/amd/display: Fix black screen with HDMI outputsAlex Hung1-0/+1
[Why & How] This fixes the black screen issue on certain APUs with HDMI, accompanied by the following messages: amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info frame on connector DP-1: -22 amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm] Cannot find any crtc or sizes Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters") Suggested-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 678c901443a6d2e909e3b51331a20f9d8f84ce82)
2025-11-04drm/amd/display: Don't stretch non-native images by default in eDPMario Limonciello (AMD)1-1/+1
commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native resolutions on eDP") started using the GPU scaler hardware to scale when a non-native resolution was picked on eDP. This scaling was done to fill the screen instead of maintain aspect ratio. The idea was supposed to be that if a different scaling behavior is preferred then the compositor would request it. The not following aspect ratio behavior however isn't desirable, so adjust it to follow aspect ratio and still try to fill screen. Note: This will lead to black bars in some cases for non-native resolutions. Compositors can request the previous behavior if desired. Fixes: 978fa2f6d0b1 ("drm/amd/display: Use scaling for non-native resolutions on eDP") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538 Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 825df7ff4bb1a383ad4827545e09aec60d230770)
2025-11-04drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()Yang Wang1-2/+2
Use the correct label to complete all cleanup work. Fixes: 4d154b1ca580 ("drm/amd/pm: Add support for DPM policies") Fixes: 25e82f2e2c59 ("drm/amd/pm: Add temperature metrics sysfs entry") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4c4c138a1c86775c4d47e24f26357a1f8b64d0a3)
2025-11-04drm/amdgpu: set default gfx reset masks for gfx6-8Alex Deucher3-0/+15
These were not set so soft recovery was inadvertantly disabled. Fixes: 6ac55eab4fc4 ("drm/amdgpu: move reset support type checks into the caller") Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1972763505d728c604b537180727ec8132e619df)
2025-10-28drm/amd/display: Fix incorrect return of vblank enable on unconfigured crtcIvan Lipski1-3/+7
[Why&How] Return -EINVAL when userspace asks us to enable vblank on a crtc that is not yet enabled. Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856 Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cb57b8cdb072dc37723b6906da1c37ff9cbc2da4) Cc: stable@vger.kernel.org
2025-10-28drm/amd/display: Add HDR workaround for a specific eDPAlex Hung1-0/+1
[WHY & HOW] Some eDP panels suffer from flicking when HDR is enabled in KDE or Gnome. This add another quirk to worksaround to skip VSC that is incompatible with an eDP panel. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 99441824bec63549a076cd86631d138ec9a0c71c) Cc: stable@vger.kernel.org
2025-10-28drm/amdgpu: fix SPDX header on cyan_skillfish_reg_init.cAlex Deucher1-1/+1
This should be MIT. The driver in general is MIT and the license text at the top of the file is MIT so fix it. Fixes: e8529dbc75ca ("drm/amdgpu: add ip offset support for cyan skillfish") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 102c4f7c554ac5a5ecf0023fa0612beb58e3b0bd)
2025-10-28drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.hAlex Deucher1-1/+1
This should be MIT. The driver in general is MIT and the license text at the top of the file is MIT so fix it. Fixes: d1bb64651095 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 68c20d7b1779f97d600e61b9e95726c0cd609e2a)
2025-10-28drm/amdgpu: fix SPDX header on amd_cper.hAlex Deucher1-1/+1
This should be MIT. The driver in general is MIT and the license text at the top of the file is MIT so fix it. Fixes: 523b69c65445 ("drm/amd/include: Add amd cper header") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 72c5482cb0f3d3c772c9de50e5a4265258a53f81)
2025-10-28drm/amdgpu: fix SPDX headers on amdgpu_cper.c/hAlex Deucher2-2/+2
These should be MIT. The driver in general is MIT and the license text at the top of the files is MIT so fix it. Fixes: 92d5d2a09de1 ("drm/amdgpu: Introduce funcs for populating CPER") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit abd3f876404cafb107cb34bacb74706bfee11cbe)
2025-10-28drm/amd/pm/powerplay/smumgr: Fix PCIeBootLinkLevel value on IcelandJohn Smith1-1/+1
Previously this was initialized with zero which represented PCIe Gen 1.0 instead of using the maximum value from the speed table which is the behaviour of all other smumgr implementations. Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.") Signed-off-by: John Smith <itistotalbotnet@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 92b0a6ae6672857ddeabf892223943d2f0e06c97)
2025-10-28drm/amd/pm/powerplay/smumgr: Fix PCIeBootLinkLevel value on FijiJohn Smith1-1/+1
Previously this was initialized with zero which represented PCIe Gen 1.0 instead of using the maximum value from the speed table which is the behaviour of all other smumgr implementations. Fixes: 18edef19ea44 ("drm/amd/powerplay: implement fw image related smu interface for Fiji.") Signed-off-by: John Smith <itistotalbotnet@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c52238c9fb414555c68340cd80e487d982c1921c)
2025-10-28drm/amd/pm: fix smu table id bound check issue in smu_cmn_update_table()Yang Wang1-1/+1
'table_index' is a variable defined by the smu driver (kmd) 'table_id' is a variable defined by the hw smu (pmfw) This code should use table_index as a bounds check. Fixes: caad2613dc4bd ("drm/amd/powerplay: move table setting common code to smu_cmn.c") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fca0c66b22303de0d1d6313059baf4dc960a4753)
2025-10-28drm/amd/display: Don't program BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled on DCN30Matthew Schwartz1-3/+0
Before commit 33056a97ae5e ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL) checked the low-power debug flag before calling dpp3_power_on_blnd_lut(false). After commit 33056a97ae5e ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL) unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing immediate SRAM power toggles instead of deferring at vupdate. This can disrupt atomic color/LUT sequencing during transitions between direct scanout and composition within gamescope's DRM backend on Steam Deck OLED. To fix this, leave the BLNDGAM power state unchanged when low-power is disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper. Fixes: 33056a97ae5e ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`") Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 13ff4f63fcddfc84ec8632f1443936b00aa26725) Cc: stable@vger.kernel.org
2025-10-28drm/amd/display: pause the workload setting in dmKenneth Feng1-0/+11
v1: Pause the workload setting in dm when doinn idle optimization v2: Rebase patch to latest kernel code base (kernel 6.16) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit bc6d54ac7e7436721a19443265f971f890c13cc5)
2025-10-28drm/amd: Check that VPE has reached DPM0 in idle handlerMario Limonciello1-4/+30
[Why] Newer VPE microcode has functionality that will decrease DPM level only when a workload has run for 2 or more seconds. If VPE is turned off before this DPM decrease and the PMFW doesn't reset it when power gating VPE, the SOC can get stuck with a higher DPM level. This can happen from amdgpu's ring buffer test because it's a short quick workload for VPE and VPE is turned off after 1s. [How] In idle handler besides checking fences are drained check PMFW version to determine if it will reset DPM when power gating VPE. If PMFW will not do this, then check VPE DPM level. If it is not DPM0 reschedule delayed work again until it is. v2: squash in return fix (Alex) Cc: Peyton.Lee@amd.com Reported-by: Sultan Alsawaf <sultan@kerneltoast.com> Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com> Tested-by: Sultan Alsawaf <sultan@kerneltoast.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3ac635367eb589bee8edcc722f812a89970e14b7) Cc: stable@vger.kernel.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.