| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
Pull generic interrupt subsystem updates from Thomas Gleixner:
- Remove pointless NULL checks of the kstats_irqs field. That's a
historical left over and not longer required.
- Add Radu Rendec as reviewer. Radu thankfully stepped up to help
reviewing the interrupt core and the related drivers code.
- The usual small improvements and fixes
* tag 'irq-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add Radu Rendec as reviewer for the interrupt subsystem
genirq/msi: Move misplaced EXPORT_SYMBOL_GPL for msi_domain_free_irqs_all()
parisc: Remove unnecessary NULL check of the kstat_irqs field
genirq: Remove unnecessary NULL check of the kstat_irqs field
irqdomain: Remove unnedded NULL check in __irq_domain_[de]activate_irq()
genirq/manage: Use irqd_get_parent_data() helper in __irq_get_irqchip_state()
irqdomain: Plug leak in irq_domain_alloc_irqs_locked() error path
|
|
While making changes to the refcounted interrupt patch series, at some
point on my local branch I broke something and ended up writing some kunit
tests for testing refcounted interrupts as a result. So, let's include
these tests now that we have refcounted interrupts.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-7-boqun@kernel.org
|
|
EXPORT_SYMBOL_GPL(msi_domain_free_irqs_all) was mistakenly placed after
msi_domain_free_irqs_range() instead of after its intended function
msi_domain_free_irqs_all().
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260717143157.1718-1-lirongqing@baidu.com
|
|
The kstat_irqs field of struct irq_desc is used to store a per-cpu count
of interrupt events. It is initialized in init_desc(), along with all
the other fields in struct irq_desc that need explicit initialization,
and therefore it's always available (non-NULL) for any valid interrupt
descriptor (with a caveat - see below).
When CONFIG_SPARSE_IRQ is enabled, all interrupt descriptors are always
allocated dynamically via alloc_desc(), which calls init_desc(), so in
that case kstat_irqs is guaranteed to be non-NULL before a valid struct
irq_desc pointer is even returned.
By contrast, when CONFIG_SPARSE_IRQ is disabled, interrupt descriptors
are allocated statically in the irq_desc[] array, and kstat_irqs is
initialized implicitly to NULL. The per-cpu pointer is initialized only
later, for all descriptors, via start_kernel() -> early_irq_init() ->
init_desc().
The kstat_irqs field is used mostly for printing interrupt statistics
(i.e. reading /proc/interrupts), and that cannot happen until much
later, when user-space is fully initialized. So, there is no concern
with that use case.
The list below includes all functions where the NULL check is removed,
along with a list of all possible call chains and/or a brief explanation
of why it's safe to remove the NULL check in that case.
* irq_desc_kstat_cpu() [include/linux/irqdesc.h]
- All direct call sites use it for printing IRQ statistics.
- Indirect call site: per_cpu_count_show() - also used for printing
interruptstatistics.
* kstat_irqs_cpu() [kernel/irq/irqdesc.c]
- Called by sun3_int7() and sun3_int5() [arch/m68k/sun3/sun3ints.c]
These are interrupt handlers and cannot be called until their
corresponding interrupts are initialized in sun3_init_IRQ(). The
call chain leading to that is:
start_kernel() -> init_IRQ() [arch/m68k/kernel/ints.c] ->
mach_init_IRQ = sun3_init_IRQ()
The init_IRQ() call happens right *after* the early_irq_init() call,
which means the descriptors are already fully initialized by the
time the interrupt handlers are even registered.
- Called by show_interrupts() [arch/s390/kernel/irq.c] - used for
printing interrupt statistics.
* kstat_irqs() [kernel/irq/irqdesc.c]
The only possible call chain is via fs/proc/stat.c:
stat_open() -> show_stat() -> show_all_irqs() -> kstat_irqs_usr() ->
kstat_irqs()
It is used for printing interrupt statistics.
* kstat_snapshot_irqs()
The only possible call chain is via kernel/watchdog.c:
watchdog_timer_fn() -> is_softlockup() -> start_counting_irqs() ->
kstat_snapshot_irqs()
The watchdog timer cannot fire early, before early_irq_init().
* kstat_get_irq_since_snapshot()
The only possible call chain is via kernel/watchdog.c:
watchdog_timer_fn() -> report_cpu_status() -> print_irq_counts() ->
kstat_get_irq_since_snapshot()
The watchdog timer cannot fire early, before early_irq_init().
Signed-off-by: Radu Rendec <radu@rendec.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260705210951.2717741-2-radu@rendec.net
|
|
Export irq_can_set_affinity() for loadable drivers that need a runtime
check for IRQ affinity capability.
In hierarchical IRQ setups where the effective irqchip path lacks
.irq_set_affinity(), drivers may need to switch to a fallback policy.
Without this export, module drivers cannot use the core helper and have
to open-code equivalent checks.
Signed-off-by: Hangtian Zhu <hangtian.zhu@oss.qualcomm.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260519011627.713068-2-hangtian.zhu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The callers already have a valid irq_data pointer, so the NULL checks in
__irq_domain_[de]activate_irq() is redundant.
Remove it.
[ tglx: Massage changelog, fix subject prefix ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623075134.4432-4-shikemeng@huaweicloud.com
|
|
Replace the open coded version of it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623075134.4432-3-shikemeng@huaweicloud.com
|
|
When irq_domain_trim_hierarchy() fails in irq_domain_alloc_irqs_locked(),
the error handling path fails to undo the hierarchy allocations.
Add the missing cleanup.
[ tglx: Massage change log ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623075134.4432-2-shikemeng@huaweicloud.com
|
|
A comment in kernel/irq/msi.c incorrectly refers to
CONFIG_PCI_MSI_ARCH_FALLBACK instead of CONFIG_PCI_MSI_ARCH_FALLBACKS.
Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260613213544.90613-1-enelsonmoore@gmail.com
|
|
Pull locking updates from Ingo Molnar:
"Futex updates:
- Optimize futex hash bucket access patterns (Peter Zijlstra)
- Large series to address the robust futex unlock race for real, by
Thomas Gleixner:
"The robust futex unlock mechanism is racy in respect to the
clearing of the robust_list_head::list_op_pending pointer because
unlock and clearing the pointer are not atomic.
The race window is between the unlock and clearing the pending op
pointer. If the task is forced to exit in this window, exit will
access a potentially invalid pending op pointer when cleaning up
the robust list.
That happens if another task manages to unmap the object
containing the lock before the cleanup, which results in an UAF.
In the worst case this UAF can lead to memory corruption when
unrelated content has been mapped to the same address by the time
the access happens.
User space can't solve this problem without help from the kernel.
This series provides the kernel side infrastructure to help it
along:
1) Combined unlock, pointer clearing, wake-up for the
contended case
2) VDSO based unlock and pointer clearing helpers with a
fix-up function in the kernel when user space was interrupted
within the critical section.
... with help by André Almeida:
- Add a note about robust list race condition (André Almeida)
- Add self-tests for robust release operations (André Almeida)
Context analysis updates:
- Implement context analysis for 'struct rt_mutex'. (Bart Van Assche)
- Bump required Clang version to 23 (Marco Elver)
Guard infrastructure updates:
- Series to remove NULL check from unconditional guards (Dmitry
Ilvokhin)
Lockdep updates:
- Restore self-test migrate_disable() and sched_rt_mutex state on
PREEMPT_RT (Karl Mehltretter)
Membarriers updates:
- Use per-CPU mutexes for targeted commands (Aniket Gattani)
- Modernize membarrier_global_expedited with cleanup guards (Aniket
Gattani)
- Add rseq stress test for CFS throttle interactions (Aniket Gattani)
percpu-rwsems updates:
- Extract __percpu_up_read() to optimize inlining overhead (Dmitry
Ilvokhin)
Seqlocks updates:
- Allow UBSAN_ALIGNMENT to fail optimizing (Heiko Carstens)
Lock tracing:
- Add contended_release tracepoint to sleepable locks such as
mutexes, percpu-rwsems, rtmutexes, rwsems and semaphores (Dmitry
Ilvokhin)
MAINTAINERS updates:
- MAINTAINERS: Add RUST [SYNC] entry (Boqun Feng)
Misc updates and fixes by Randy Dunlap, YE WEI-HONG, Fabricio Parra,
Dmitry Ilvokhin and Peter Zijlstra"
* tag 'locking-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (36 commits)
locking: Add contended_release tracepoint to sleepable locks
locking/percpu-rwsem: Extract __percpu_up_read()
tracing/lock: Remove unnecessary linux/sched.h include
futex: Optimize futex hash bucket access patterns
rust: sync: completion: Mark inline complete_all and wait_for_completion
MAINTAINERS: Add RUST [SYNC] entry
cleanup: Specify nonnull argument index
selftests: futex: Add tests for robust release operations
Documentation: futex: Add a note about robust list race condition
x86/vdso: Implement __vdso_futex_robust_try_unlock()
x86/vdso: Prepare for robust futex unlock support
futex: Provide infrastructure to plug the non contended robust futex unlock race
futex: Add robust futex unlock IP range
futex: Add support for unlocking robust futexes
futex: Cleanup UAPI defines
x86: Select ARCH_MEMORY_ORDER_TSO
uaccess: Provide unsafe_atomic_store_release_user()
futex: Provide UABI defines for robust list entry modifiers
futex: Move futex related mm_struct data into a struct
futex: Make futex_mm_init() void
...
|
|
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
|
irqdesc_lock uses __DEFINE_UNLOCK_GUARD() directly with a custom
constructor that can set .lock to NULL.
In preparation for removing the NULL check from __DEFINE_UNLOCK_GUARD(),
move the NULL check into the irqdesc_lock unlock expression, making the
NULL handling explicit at the call site.
No functional change.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/ab457810653e4356e29b2d74ba616478bd9328ad.1780064327.git.d@ilvokhin.com
|
|
Reading /proc/interrupts iterates over the interrupt number space one by
one and looks up the descriptors one by one. That's just a waste of time.
When CONFIG_GENERIC_IRQ_SHOW is enabled this can utilize the maple tree and
cache the descriptor pointer efficiently for the sequence file operations.
Implement a CONFIG_GENERIC_IRQ_SHOW specific version in the core code and
leave the fs/proc/ variant for the legacy architectures which ignore generic
code.
This reduces the time wasted for looking up the next record significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.165280601@kernel.org
|
|
The chip name column in the /proc/interrupt output is 8 characters and
right aligned, which causes visual clutter due to the fixed length and the
alignment. Many interrupt chips, e.g. PCI/MSI[X] have way longer names.
Update the length when a chip is assigned to an interrupt and utilize this
information for the output. Align it left so all chip names start at the
begin of the column.
Update the GDB script as well and disentangle the header maze so it
actually works with all .config combinations.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.085786035@kernel.org
|
|
... in preparation for a smarter iterator for /proc/interrupts.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.005787611@kernel.org
|
|
Prepare for a smarter iterator for /proc/interrupts so that the next
interrupt descriptor can be cached after lookup.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194931.917415190@kernel.org
|
|
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
|
|
Calculating the precision of the interrupt number column on every initial
show_interrupt() invocation is a pointless exercise as the underlying
maximum number of interrupts rarely changes.
Calculate it only when that number is modified and let show_interrupts()
use the cached value.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.760664517@kernel.org
|
|
show_interrupts() evaluates a boatload of conditions to establish whether
it should expose an interrupt in /proc/interrupts or not.
That can be simplified by caching the condition in an internal status flag,
which is updated when one of the relevant inputs changes.
The irq_desc::kstat_irq check is dropped because visible interrupt
descriptors always have a valid pointer.
As a result the number of instructions and branches for reading
/proc/interrupts is reduced significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.680943749@kernel.org
|
|
Eventually blocking functions cannot be invoked with interrupts disabled
and a raw spin lock held. Restructure the code so this happens outside of
the descriptor lock held region.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260517194931.601972758@kernel.org
|
|
... to avoid function calls in the core code to retrieve the maximum number
of interrupts.
Rename it to 'total_nr_irqs' as 'nr_irqs' is too generic and fix up the
'nr_irqs' reference in the related GDB script as well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.522168332@kernel.org
|
|
Interrupts which are not marked per CPU increment not only the per CPU
statistics, but also the accumulation counter irq_desc::tot_count.
Change the counter to type unsigned long so it does not produce sporadic
zeros due to wrap arounds on 64-bit machines and do a quick check for non
per CPU interrupts. If the counter is zero, then simply emit a full set of
zero strings. That spares the evaluation of the per CPU counters completely
for interrupts with zero events.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.115522199@kernel.org
|
|
A large portion of interrupt count entries are zero. There is no point in
formatting the zero value as it is way cheeper to just emit a constant
string.
Collect the number of consecutive zero counts and emit them in one go
before a non-zero count and at the end of the line.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.034728540@kernel.org
|
|
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260404101001.1-genirq-proc-pengpeng@iscas.ac.cn
|
|
Recently handle_percpu_devid_irq() was changed to call
add_interrupt_randomness(). This introduced a potential deadlock when
handle_percpu_devid_irq() is used to handle an NMI, which can be
detected with lockdep, e.g.
================================
WARNING: inconsistent lock state
7.1.0-rc2-pnmi #465 Not tainted
--------------------------------
inconsistent {INITIAL USE} -> {IN-NMI} usage.
perf/695 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffff00837dfd3a18 (&base->lock){-.-.}-{2:2}, at: lock_timer_base+0x6c/0xac
{INITIAL USE} state was registered at:
_raw_spin_lock_irqsave+0x68/0xb0
lock_timer_base+0x6c/0xac
__mod_timer+0x100/0x32c
add_timer_global+0x2c/0x40
__queue_delayed_work+0xf0/0x140
queue_delayed_work_on+0x134/0x138
mem_cgroup_css_online+0x30c/0x310
online_css+0x34/0x10c
cgroup_init_subsys+0x158/0x1c8
cgroup_init+0x440/0x524
start_kernel+0x888/0x998
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&base->lock);
<Interrupt>
lock(&base->lock);
*** DEADLOCK ***
Call trace:
_raw_spin_lock_irqsave+0x68/0xb0
lock_timer_base+0x6c/0xac
add_timer_on+0x78/0x16c
add_interrupt_randomness+0x124/0x134
handle_percpu_devid_irq+0xd4/0x16c
handle_irq_desc+0x40/0x58
generic_handle_domain_nmi+0x28/0x50
__gic_handle_nmi.isra.0+0x4c/0xa0
gic_handle_irq+0x38/0x2bc
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x98
el1_interrupt+0x90/0xac
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x80/0x84
[...]
During review, Thomas pointed out it wouldn't be safe for
handle_percpu_devid_irq() to call add_interrupt_randomness() if it was
used to handle NMIs:
https://lore.kernel.org/lkml/87bjgik042.ffs@tglx/
... but evidently people missed that handle_percpu_devid_irq() *is* used
for NMIs.
While it might seem that NMIs should be handled with a separate
handle_percpu_devid_nmi() function, for various structural reasons this was
impractical, and handle_percpu_devid_irq() has been expected to be used for
NMIs since commits:
21bbbc50f398f ("irqchip/gic-v3: Switch high priority PPIs over to handle_percpu_devid_irq()")
5ff78c8de9d83 ("genirq: Kill handle_percpu_devid_fasteoi_nmi()")
Taking the above into account, avoid the deadlock by not calling
add_interrupt_randomness() when handle_percpu_devid_irq() is called in an
NMI context. This is consistent with other NNI handling flows, which do not
call add_interrupt_randomness().
At the same time, update the kernel-doc comment to make it clear that
handle_percpu_devid_irq() can be called in NMI context. The rest of
handle_percpu_devid_irq() is currently NMI safe and doesn't need to change.
Fixes: fd7400cfcbaa ("genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq()")
Reported-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260507110518.3128248-1-mark.rutland@arm.com
|
|
handle_percpu_devid_irq() is a version of handle_percpu_irq() but with the
addition of a pointer to a per-CPU devid.
However, handle_percpu_irq() invokes add_interrupt_randomness(), while
handle_percpu_devid_irq() currently does not.
Add the missing add_interrupt_randomness(), as it is needed when per-CPU
interrupts with devid's are used in VMs for interrupts from the hypervisor.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260402202400.1707-2-mhklkml@zohomail.com
|
|
cpu_possible_mask is set early during boot based on information from the
firmware. After that it remains read only and is never changed. Therefore
there is no need to acquire the CPU-hotplug lock while reading it.
Remove cpus_read_*() while accessing cpu_possible_mask.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260401121334.xeMOSC1v@linutronix.de
|
|
Delete IRQ_MATRIX_BITS leftovers after commit 5b98d210ac1e ("genirq/matrix:
Dynamic bitmap allocation") has made IRQ_MATRIX_BITS obsolete.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260316072850.467995-1-namcao@linutronix.de
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
|
|
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core subsystem:
- Remove the interrupt timing infrastructure
This was added seven years ago to be used for power management
purposes, but that integration never happened.
- Clean up the remaining setup_percpu_irq() users
The memory allocator is available when interrupts can be requested
so there is not need for static irq_action. Move the remaining
users to request_percpu_irq() and delete the historical cruft.
- Warn when interrupt flag inconsistencies are detected in
request*_irq().
Inconsistent flags can lead to hard to diagnose malfunction. The
fallout of this new warning has been addressed in next and the
fixes are coming in via the maintainer trees and the tip
irq/cleanup pull requests.
- Invoke affinity notifier when CPU hotplug breaks affinity
Otherwise the code using the notifier misses the affinity change
and operates on stale information.
- The usual cleanups and improvements"
* tag 'irq-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/proc: Replace snprintf with strscpy in register_handler_proc
genirq/cpuhotplug: Notify about affinity changes breaking the affinity mask
genirq: Move clear of kstat_irqs to free_desc()
genirq: Warn about using IRQF_ONESHOT without a threaded handler
irqdomain: Fix up const problem in irq_domain_set_name()
genirq: Remove setup_percpu_irq()
clocksource/drivers/mips-gic-timer: Move GIC timer to request_percpu_irq()
MIPS: Move IP27 timer to request_percpu_irq()
MIPS: Move IP30 timer to request_percpu_irq()
genirq: Remove __request_percpu_irq() helper
genirq: Remove IRQ timing tracking infrastructure
|
|
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
|
|
Merge updates related to runtime PM for 6.20-rc1/7.0-rc1:
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
* pm-runtime:
drm: Discard pm_runtime_put() return value
genirq/chip: Change irq_chip_pm_put() return type to void
scsi: ufs: core: Discard pm_runtime_put() return values
platform/chrome: cros_hps_i2c: Discard pm_runtime_put() return value
coresight: Discard pm_runtime_put() return values
hwspinlock: omap: Discard pm_runtime_put() return value
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
media: ccs: Discard pm_runtime_put() return value
drm/imagination: Discard pm_runtime_put() return value
USB: core: Discard pm_runtime_put() return value
|
|
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260127224949.441391-2-thorsten.blum@linux.dev
|
|
The interrupts which are handled by the redirection infrastructure provide
a irq_set_affinity() callback, which solely determines the target CPU for
redirection via irq_work and und updates the effective affinity mask.
Contrary to regular MSI interrupts this affinity setting does not change
the underlying interrupt message as the message is only created at setup
time to deliver to the demultiplexing interrupt.
Therefore the message write in msi_domain_set_affinity() is a pointless
exercise. In principle the write is harmless, but a Tegra system exposes a
full system hang during suspend due to that write.
It's unclear why the check for the PCI device state PCI_D0 in
pci_msi_domain_write_msg(), which prevents the actual hardware access if
a device is in powered down state, fails on this particular system, but
that's a different problem which needs to be investigated by the Tegra
experts.
The irq_set_affinity() callback can advise msi_domain_set_affinity() not to
write the MSI message by returning IRQ_SET_MASK_OK_DONE instead of
IRQ_SET_MASK_OK. Do exactly that.
Just to make it clear again:
This is not a correctness issue of the redirection code as returning
IRQ_SET_MASK_OK in that context is completely correct. From the core
code point of view this is solely a optimization to avoid an redundant
hardware write.
As a byproduct it papers over the underlying problem on the Tegra platform,
which fails to put the PCIe device[s] out of PCI_D0 despite the fact that
the devices and busses have been shut down. The redirect infrastructure
just unearthed the underlying issue, which is prone to happen in quite some
other code paths which use the PCI_D0 check to prevent hardware access to
powered down devices.
This therefore has neither a 'Fixes:' nor a 'Closes:' tag associated as the
underlying problem, which is outside the scope of the interrupt code, is
still unresolved.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/all/4e5b349c-6599-4871-9e3b-e10352ae0ca0@nvidia.com
Link: https://patch.msgid.link/87tsw6aglz.ffs@tglx
|
|
The GICv5 driver IRQ domain hierarchy requires adding a parent field to
struct irqchip_fwid so that core code can reference a fwnode_handle parent
for a given fwnode.
Add a parent field to struct irqchip_fwid and update the related kernel API
functions to initialize and handle it.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-1-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The irq_chip_pm_put() return value is only used in __irq_do_set_handler()
to trigger a WARN_ON() if it is negative, but doing so is not useful
because irq_chip_pm_put() simply passes the pm_runtime_put() return value
to its callers.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
For this reason, modify irq_chip_pm_put() to discard the pm_runtime_put()
return value, change its return type to void, and drop the WARN_ON()
around the irq_chip_pm_put() invocation from __irq_do_set_handler().
Also update the irq_chip_pm_put() kerneldoc comment to be more accurate.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/5075294.31r3eYUQgx@rafael.j.wysocki
|
|
During CPU offlining the interrupts affined to that CPU are moved to other
online CPUs, which might break the original affinity mask if the outgoing
CPU was the last online CPU in that mask. This change is not propagated to
irq_desc::affinity_notify(), which leaves users of the affinity notifier
mechanism with stale information.
Avoid this by scheduling affinity change notification work for interrupts
that were affined to the CPU being offlined, if the new target CPU is not
part of the original affinity mask.
Since irq_set_affinity_locked() uses the same logic to schedule affinity
change notification work, split out this logic into a dedicated function
and use that at both places.
[ tglx: Removed the EXPORT(), removed the !SMP stub, moved the prototype,
added a lockdep assert instead of a comment, fixed up coding style
and name space. Polished and clarified the change log ]
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113143727.1041265-1-imran.f.khan@oracle.com
|
|
desc_set_defaults() has a loop to clear the per-cpu counters kstats_irq.
This is only needed in free_desc(), which is used with non-sparse IRQs so
that the interrupt descriptor can be recycled. For newly allocated
descriptors, the memory comes from alloc_percpu() and is already zeroed
out.
Move the loop to free_desc() to avoid wasting time unnecessarily.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260112083234.2665832-1-lrizzo@google.com
|
|
For redirected interrupts, irq_chip_redirect_set_affinity() does not
update the effective affinity mask, which then triggers the warning in
irq_validate_effective_affinity(). Also, because the effective affinity
mask is empty, the cpumask_test_cpu(smp_processor_id(), m) condition in
demux_redirect_remote() is always false, and the interrupt is always
redirected, even if it's already running on the target CPU.
Set the effective affinity mask to be the same as the requested affinity
mask. It's worth noting that irq_do_set_affinity() filters out offline
CPUs before calling chip->irq_set_affinity() (unless `force` is set), so
the mask passed to irq_chip_redirect_set_affinity() is already filtered.
The solution is not ideal because it may lie about the effective
affinity of the demultiplexed ("child") interrupt. If the requested
affinity mask includes multiple CPUs, the effective affinity, in
reality, is the intersection between the requested mask and the
demultiplexing ("parent") interrupt's effective affinity mask, plus
the first CPU in the requested mask.
Accurately describing the effective affinity of the demultiplexed
interrupt is not trivial because it requires keeping track of the
demultiplexing interrupt's effective affinity. That is tricky in the
context of CPU hot(un)plugging, where interrupt migration ordering is
not guaranteed. The solution in the initial version of the fixed patch,
which stored the first CPU of the demultiplexing interrupt's effective
affinity in the `target_cpu` field, has its own drawbacks and
limitations.
Fixes: fcc1d0dabdb6 ("genirq: Add interrupt redirection infrastructure")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260112211402.2927336-1-rrendec@redhat.com
Closes: https://lore.kernel.org/all/44509520-f29b-4b8a-8986-5eae3e022eb7@nvidia.com/
|
|
IRQF_ONESHOT disables the interrupt source until after the threaded
handler completed its work. This is needed to allow the threaded handler
to run - otherwise the CPU will get back to the interrupt handler
because the interrupt source remains active and the threaded handler
will not able to do its work.
Specifying IRQF_ONESHOT without a threaded handler does not make sense.
It could be a leftover if the handler _was_ threaded and changed back to
primary and the flag was not removed. This can be problematic in the
`threadirqs' case because the handler is exempt from forced-threading.
This in turn can become a problem on a PREEMPT_RT system if the handler
attempts to acquire sleeping locks.
Warn about missing threaded handlers with the IRQF_ONESHOT flag.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260112134013.eQWyReHR@linutronix.de
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Export irq_domain_free_irqs() to allow PCI/MSI drivers like pci-tegra to be
built as a module.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250731-pci-tegra-module-v7-1-cad4b088b8fb@gmail.com
|
|
Pull irq fix from Ingo Molnar:
"Fix IRQ thread affinity flags setup regression"
* tag 'irq-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Don't overwrite interrupt thread flags on setup
|
|
In irq_domain_set_name() a const pointer is passed in, and then the
const is "lost" when container_of() is called. Fix this up by properly
preserving the const pointer attribute when container_of() is used to
enforce the fact that this pointer should not have anything at it
changed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/2025121731-facing-unhitched-63ae@gregkh
|
|
Add infrastructure to redirect interrupt handler execution to a
different CPU when the current CPU is not part of the interrupt's CPU
affinity mask.
This is primarily aimed at (de)multiplexed interrupts, where the child
interrupt handler runs in the context of the parent interrupt handler,
and therefore CPU affinity control for the child interrupt is typically
not available.
With the new infrastructure, the child interrupt is allowed to freely
change its affinity setting, independently of the parent. If the
interrupt handler happens to be triggered on an "incompatible" CPU (a
CPU that's not part of the child interrupt's affinity mask), the handler
is redirected and runs in IRQ work context on a "compatible" CPU.
No functional change is being made to any existing irqchip driver, and
irqchip drivers must be explicitly modified to use the newly added
infrastructure to support interrupt redirection.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-pci/878qpg4o4t.ffs@tglx/
Link: https://patch.msgid.link/20251128212055.1409093-2-rrendec@redhat.com
|
Linus Torvalds
Lyude Paul
Li RongQing
Radu Rendec
Hangtian Zhu
Kemeng Shi
Ethan Nelson-Moore
Dmitry Ilvokhin
Thomas Gleixner
Pengpeng Hou
Mark Rutland
Michael Kelley
Sebastian Andrzej Siewior
Nam Cao
Kees Cook
Rafael J. Wysocki
Thorsten Blum
Lorenzo Pieralisi
Imran Khan
Luigi Rizzo
Radu Rendec
Aaron Kling
Greg Kroah-Hartman