| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
|
Pull ACPI updates from Rafael Wysocki:
"These add Microsoft fan extensions support to the ACPI fan driver, fix
a bug in ACPICA, update other ACPI drivers (processor, time and alarm
device), update ACPI power management code and ACPI device properties
management, and fix an ACPI utility:
- Avoid walking the ACPI namespace in the AML interpreter if the
starting node cannot be determined (Cryolitia PukNgae)
- Use min() instead of min_t() in the ACPI device properties handling
code to avoid discarding significant bits (David Laight)
- Fix potential fwnode refcount leak in
acpi_fwnode_graph_parse_endpoint() that may prevent the parent
fwnode from being released (Haotian Zhang)
- Rework acpi_graph_get_next_endpoint() to use ACPI functions only,
remove unnecessary conditionals from it to make it easier to
follow, and make acpi_get_next_subnode() static (Sakari Ailus)
- Drop unused function acpi_get_lps0_constraint(), make some
Low-Power S0 callback functions for suspend-to-idle static, and
rearrange the code retrieving Low-Power S0 constraints so it only
runs when the constraints are actually used (Rafael Wysocki)
- Drop redundant locking from the ACPI battery driver (Rafael
Wysocki)
- Improve runtime PM in the ACPI time and alarm device (TAD) driver
using guard macros and rearrange code related to runtime PM in
acpi_tad_remove() (Rafael Wysocki)
- Add support for Microsoft fan extensions to the ACPI fan driver
along with notification support and work around a 64-bit firmware
bug in that driver (Armin Wolf)
- Use ACPI_FREE() to free ACPI buffer in the ACPI DPTF code
(Kaushlendra Kumar)
- Fix a memory leak and a resource leak in the ACPI pfrut utility
(Malaya Kumar Rout)
- Replace `core::mem::zeroed` with `pin_init::zeroed` in the ACPI
Rust code (Siyuan Huang)
- Update the ACPI code to use the new style of allocating workqueues
and new global workqueues (Marco Crivellari)
- Fix two spelling mistakes in the ACPI code (Chu Guangqing)
- Fix ISAPNP to generate uevents to auto-load modules (René Rebe)
- Relocate the state flags initialization in the ACPI processor idle
driver and drop redundant C-state count checks from it (Huisong Li)
- Fix map_x2apic_id() in the ACPI processor core driver for
amd-pstate on am4 (René Rebe)"
* tag 'acpi-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: PM: Fix a spelling mistake
ACPI: LPSS: Fix a spelling mistake
ACPI: processor_core: fix map_x2apic_id for amd-pstate on am4
ACPICA: Avoid walking the Namespace if start_node is NULL
ACPI: tools: pfrut: fix memory leak and resource leak in pfrut.c
ACPI: property: use min() instead of min_t()
PNP: Fix ISAPNP to generate uevents to auto-load modules
ACPI: property: Fix fwnode refcount leak in acpi_fwnode_graph_parse_endpoint()
ACPI: DPTF: Use ACPI_FREE() for ACPI buffer deallocation
ACPI: processor: idle: Drop redundant C-state count checks
ACPI: thermal: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: Add WQ_PERCPU to alloc_workqueue() users
ACPI: EC: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: replace use of system_wq with system_percpu_wq
ACPI: scan: replace use of system_unbound_wq with system_dfl_wq
ACPI: fan: Add support for Microsoft fan extensions
ACPI: fan: Add hwmon notification support
ACPI: fan: Add basic notification support
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
...
|
|
Pull locking updates from Ingo Molnar:
"Mutexes:
- Redo __mutex_init() to reduce generated code size (Sebastian
Andrzej Siewior)
Seqlocks:
- Introduce scoped_seqlock_read() (Peter Zijlstra)
- Change thread_group_cputime() to use scoped_seqlock_read() (Oleg
Nesterov)
- Change do_task_stat() to use scoped_seqlock_read() (Oleg Nesterov)
- Change do_io_accounting() to use scoped_seqlock_read() (Oleg
Nesterov)
- Fix the incorrect documentation of read_seqbegin_or_lock() /
need_seqretry() (Oleg Nesterov)
- Allow KASAN to fail optimizing (Peter Zijlstra)
Local lock updates:
- Fix all kernel-doc warnings (Randy Dunlap)
- Add the <linux/local_lock*.h> headers to MAINTAINERS (Sebastian
Andrzej Siewior)
- Reduce the risk of shadowing via s/l/__l/ and s/tl/__tl/ (Vincent
Mailhol)
Lock debugging:
- spinlock/debug: Fix data-race in do_raw_write_lock (Alexander
Sverdlin)
Atomic primitives infrastructure:
- atomic: Skip alignment check for try_cmpxchg() old arg (Arnd
Bergmann)
Rust runtime integration:
- sync: atomic: Enable generated Atomic<T> usage (Boqun Feng)
- sync: atomic: Implement Debug for Atomic<Debug> (Boqun Feng)
- debugfs: Remove Rust native atomics and replace them with Linux
versions (Boqun Feng)
- debugfs: Implement Reader for Mutex<T> only when T is Unpin (Boqun
Feng)
- lock: guard: Add T: Unpin bound to DerefMut (Daniel Almeida)
- lock: Pin the inner data (Daniel Almeida)
- lock: Add a Pin<&mut T> accessor (Daniel Almeida)"
* tag 'locking-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/local_lock: Fix all kernel-doc warnings
locking/local_lock: s/l/__l/ and s/tl/__tl/ to reduce the risk of shadowing
locking/local_lock: Add the <linux/local_lock*.h> headers to MAINTAINERS
locking/mutex: Redo __mutex_init() to reduce generated code size
rust: debugfs: Replace the usage of Rust native atomics
rust: sync: atomic: Implement Debug for Atomic<Debug>
rust: sync: atomic: Make Atomic*Ops pub(crate)
seqlock: Allow KASAN to fail optimizing
rust: debugfs: Implement Reader for Mutex<T> only when T is Unpin
seqlock: Change do_io_accounting() to use scoped_seqlock_read()
seqlock: Change do_task_stat() to use scoped_seqlock_read()
seqlock: Change thread_group_cputime() to use scoped_seqlock_read()
seqlock: Introduce scoped_seqlock_read()
documentation: seqlock: fix the wrong documentation of read_seqbegin_or_lock/need_seqretry
atomic: Skip alignment check for try_cmpxchg() old arg
rust: lock: Add a Pin<&mut T> accessor
rust: lock: Pin the inner data
rust: lock: guard: Add T: Unpin bound to DerefMut
locking/spinlock/debug: Fix data-race in do_raw_write_lock
|
|
Merge miscellaneous ACPI support updates and a PNP update for 6.19-rc1:
- Replace `core::mem::zeroed` with `pin_init::zeroed` in the ACPI Rust
code (Siyuan Huang)
- Update the ACPI code to use the new style of allocating workqueues
and new global workqueues (Marco Crivellari)
- Fix two spelling mistakes in the ACPI code (Chu Guangqing)
- Fix ISAPNP to generate uevents to auto-load modules (René Rebe)
* acpi-misc:
ACPI: PM: Fix a spelling mistake
ACPI: LPSS: Fix a spelling mistake
ACPI: thermal: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: Add WQ_PERCPU to alloc_workqueue() users
ACPI: EC: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: replace use of system_wq with system_percpu_wq
ACPI: scan: replace use of system_unbound_wq with system_dfl_wq
rust: acpi: replace `core::mem::zeroed` with `pin_init::zeroed`
* pnp:
PNP: Fix ISAPNP to generate uevents to auto-load modules
|
|
Pull OPP updates for 6.19 from Viresh Kumar:
"- Minor improvements to the Rust interface (Tamir Duberstein).
- Fixes to scope-based pointers (Viresh Kumar)."
* tag 'opp-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
|
|
Rust native atomics are not allowed to use in kernel due to the mismatch
of memory model with Linux kernel memory model, hence remove the usage
of Rust native atomics in debufs.
Reviewed-by: Matthew Maurer <mmaurer@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251022035324.70785-4-boqun.feng@gmail.com
|
|
If `Atomic<T>` is `Debug` then it's a `debugfs::Writer`, therefore make
it so since 1) debugfs needs to support `Atomic<T>` and 2) it's rather
trivial to implement `Debug` for `Atomic<Debug>`.
Tested-by: David Gow <davidgow@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251022035324.70785-3-boqun.feng@gmail.com
|
|
In order to write code over a generate Atomic<T> we need to make
Atomic*Ops public so that functions like `.load()` and `.store()` are
available. Make these pub(crate) at the beginning so the usage in kernel
crate is supported.
Tested-by: David Gow <davidgow@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251022035324.70785-2-boqun.feng@gmail.com
|
|
The future move of pin-init to `syn` uncovers the following broken
intra-doc link:
error: unresolved link to `crate::pin_init`
--> rust/kernel/sync/condvar.rs:39:40
|
39 | /// instances is with the [`pin_init`](crate::pin_init!) and [`new_condvar`] macros.
| ^^^^^^^^^^^^^^^^ no item named `pin_init` in module `kernel`
|
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Currently, when rendered, the link points to a literal `crate::pin_init!`
URL.
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: 129e97be8e28 ("rust: pin-init: fix documentation links")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251029073344.349341-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The future move of pin-init to `syn` uncovers the following private
intra-doc link:
error: public documentation for `Devres` links to private item `Self::inner`
--> rust/kernel/devres.rs:106:7
|
106 | /// [`Self::inner`] is guaranteed to be initialized and is always accessed read-only.
| ^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `-D rustdoc::private-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::private_intra_doc_links)]`
Currently, when rendered, the link points to "nowhere" (an inexistent
anchor for a "method").
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: f5d3ef25d238 ("rust: devres: get rid of Devres' inner Arc")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251029071406.324511-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
All types in `bindings` implement `Zeroable` if they can, so use
`pin_init::zeroed` instead of relying on `unsafe` code.
If this ends up not compiling in the future, something in bindgen or on
the C side changed and is most likely incorrect.
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Siyuan Huang <huangsiyuan@kylinos.cn>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://patch.msgid.link/20251020031204.78917-1-huangsiyuan@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
|
|
Use `Option` combinators to make this a bit less noisy.
Wrap the `dev_pm_opp_set_config` operation in a closure and use type
ascription to leverage the compiler to check for use after free.
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Since we are going to make `Mutex<T>` structurally pin the data (i.e.
`T`), therefore `.lock()` function only returns a `Guard` that can
dereference a mutable reference to `T` if only `T` is `Unpin`, therefore
restrict the impl `Reader` block of `Mutex<T>` to that.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251022034237.70431-1-boqun.feng@gmail.com
|
|
Correct the spelling of "CString" to make the link work.
Fixes: ce32e2d47ce6 ("rust: opp: Add abstractions for the configuration options")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
In order for callers to be able to access the inner T safely if T:
!Unpin, there needs to be a way to get a Pin<&mut T>. Add this accessor
and a corresponding example to tell users how it works.
This requires the pin projection functionality [1] for better ergonomic.
[boqun: Apply Daniel's fix to the code example, add the reference to pin
projection patch and remove out-of-date part in the commit log]
Suggested-by: Benno Lossin <lossin@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1181
Link: https://lore.kernel.org/rust-for-linux/20250912174148.373530-1-lossin@kernel.org/ [1]
|
|
In preparation to support Lock<T> where T is pinned, the first thing
that needs to be done is to structurally pin the 'data' member. This
switches the 't' parameter in Lock<T>::new() to take in an impl
PinInit<T> instead of a plain T. This in turn uses the blanket
implementation "impl PinInit<T> for T".
Subsequent patches will touch on Guard<T>.
Suggested-by: Benno Lossin <lossin@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1181
|
|
A core property of pinned types is not handing a mutable reference to
the inner data in safe code, as this trivially allows that data to be
moved.
Enforce this condition by adding a bound on lock::Guard's DerefMut
implementation, so that it's only implemented for pinning-agnostic
types.
Suggested-by: Benno Lossin <lossin@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1181
|
|
Regardless of the DeviceContext of a device, we can't give any
guarantees about the DeviceContext of its parent device.
This is very subtle, since it's only caused by a simple typo, i.e.
Self::from_raw(parent)
which preserves the DeviceContext in this case, vs.
Device::from_raw(parent)
which discards the DeviceContext.
(I should have noticed it doing the correct thing in auxiliary::Device
subsequently, but somehow missed it.)
Hence, fix both Device::parent() and auxiliary::Device::parent().
Cc: stable@vger.kernel.org
Fixes: a4c9f71e3440 ("rust: device: implement Device::parent()")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We do our best to keep the repository `rustfmt`-clean, thus run the tool
to fix the formatting issue.
Link: https://docs.kernel.org/rust/coding-guidelines.html#style-formatting
Link: https://rust-for-linux.com/contributing#submit-checklist-addendum
Fixes: 0f5878834d6c ("rust: bitmap: clean Rust 1.92.0 `unused_unsafe` warning")
Reviewed-by: Burak Emir <bqe@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We do our best to keep the repository `rustfmt`-clean, thus run the tool
to fix the formatting issue.
Link: https://docs.kernel.org/rust/coding-guidelines.html#style-formatting
Link: https://rust-for-linux.com/contributing#submit-checklist-addendum
Fixes: f97aef092e19 ("cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Apply the formatting guidelines introduced in the previous commit to
make the file `rustfmt`-clean again.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull vfs fixes from Christian Brauner:
- Handle inode number mismatches in nsfs file handles
- Update the comment to init_file()
- Add documentation link for EBADF in the rust file code
- Skip read lock assertion for read-only filesystems when using dax
- Don't leak disconnected dentries during umount
- Fix new coredump input pattern validation
- Handle ENOIOCTLCMD conversion in vfs_fileattr_{g,s}et() correctly
- Remove redundant IOCB_DIO_CALLER_COMP clearing in overlayfs
* tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: remove redundant IOCB_DIO_CALLER_COMP clearing
fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
coredump: fix core_pattern input validation
vfs: Don't leak disconnected dentries on umount
dax: skip read lock assertion for read-only filesystems
rust: file: add intra-doc link for 'EBADF'
fs: update comment in init_file()
nsfs: handle inode number mismatches gracefully in file handles
|
|
Starting with Rust 1.92.0 (expected 2025-12-11), Rust allows to safely
take the address of a union field [1][2]:
CLIPPY L rust/kernel.o
error: unnecessary `unsafe` block
--> rust/kernel/bitmap.rs:169:13
|
169 | unsafe { core::ptr::addr_of!(self.repr.bitmap) }
| ^^^^^^ unnecessary `unsafe` block
|
= note: `-D unused-unsafe` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_unsafe)]`
error: unnecessary `unsafe` block
--> rust/kernel/bitmap.rs:185:13
|
185 | unsafe { core::ptr::addr_of_mut!(self.repr.bitmap) }
| ^^^^^^ unnecessary `unsafe` block
Thus allow both instances to clean the warning in newer compilers.
Link: https://github.com/rust-lang/rust/issues/141264 [1]
Link: https://github.com/rust-lang/rust/pull/141469 [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Pull more power management updates from Rafael Wysocki:
"These are cpufreq fixes and cleanups on top of the material merged
previously, a power management core code fix and updates of the
runtime PM framework including unit tests, documentation updates and
introduction of auto-cleanup macros for runtime PM "resume and get"
and "get without resuming" operations.
Specifics:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6
cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency()
to indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the given
device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update
return values in kerneldoc comments for the runtime PM API (Brian
Norris, Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)"
* tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
|
|
The `BadFdError` doc comment mentions the `EBADF` constant but does
not currently provide a navigation target for readers of the
generated docs. Turning the references into intra-doc links matches
the rest of the module and makes the documentation easier to
explore.
Suggested-by: Onur Özkan <work@onurozkan.dev>
Link: https://github.com/Rust-for-Linux/linux/issues/1186
Signed-off-by: Tong Li <djfkvcing117@gmail.com>
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Merge cpufreq fixes and cleanups, mostly on top of those fixes, for
6.18-rc1:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6 cycle
that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency() to
indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
* pm-cpufreq:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
|
|
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
|
Pull bitmap updates from Yury Norov:
- FIELD_PREP_WM16() consolidation (Nicolas)
- bitmaps for Rust (Burak)
- __fls() fix for arc (Kees)
* tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits)
rust: add dynamic ID pool abstraction for bitmap
rust: add find_bit_benchmark_rust module.
rust: add bitmap API.
rust: add bindings for bitops.h
rust: add bindings for bitmap.h
phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
clk: sp7021: switch to FIELD_PREP_WM16 macro
PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
PCI: rockchip: Switch to FIELD_PREP_WM16* macros
net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
...
|
|
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
|
|
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
|
|
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
|
Pull regulator updates from Mark Brown:
"This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust
bindings.
- Additional APIs added to the Rust bindings
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
and SpacemiT P1"
* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
regulator: Fix MAX77838 selection
regulator: spacemit: support SpacemiT P1 regulators
regulator: max77838: add max77838 regulator driver
dt-bindings: regulator: document max77838 pmic
rust: regulator: add devm_enable and devm_enable_optional
rust: regulator: remove Regulator<Dynamic>
regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
regulator: pf530x: Add a driver for the NXP PF5300 Regulator
regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
regulator: scmi: Use int type to store negative error codes
regulator: core: Remove redundant ternary operators
rust: regulator: use `to_result` for error handling
regulator: consumer.rst: document bulk operations
regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
regulator: bd718x7: Use kcalloc() instead of kzalloc()
regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
regulator: remove unneeded 'fast_io' parameter in regmap_config
regulator: rt5133: Add RT5133 PMIC regulator Support
regulator: dt-bindings: Add Richtek RT5133 Support
...
|
|
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
|
Commit a755d0e2d41b ("cpufreq: Honour transition_latency over
transition_delay_us") caused platforms where cpuinfo.transition_latency
is CPUFREQ_ETERNAL to get a very large transition latency whereas
previously it had been capped at 10 ms (and later at 2 ms).
This led to a user-observable regression between 6.6 and 6.12 as
described by Shawn:
"The dbs sampling_rate was 10000 us on 6.6 and suddently becomes
6442450 us (4294967295 / 1000 * 1.5) on 6.12 for these platforms
because the default transition delay was dropped [...].
It slows down dbs governor's reacting to CPU loading change
dramatically. Also, as transition_delay_us is used by schedutil
governor as rate_limit_us, it shows a negative impact on device
idle power consumption, because the device gets slightly less time
in the lowest OPP."
Evidently, the expectation of the drivers using CPUFREQ_ETERNAL as
cpuinfo.transition_latency was that it would be capped by the core,
but they may as well return a default transition latency value instead
of CPUFREQ_ETERNAL and the core need not do anything with it.
Accordingly, introduce CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS and make
all of the drivers in question use it instead of CPUFREQ_ETERNAL. Also
update the related Rust binding.
Fixes: a755d0e2d41b ("cpufreq: Honour transition_latency over transition_delay_us")
Closes: https://lore.kernel.org/linux-pm/20250922125929.453444-1-shawnguo2@yeah.net/
Reported-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2264949.irdbgypaU6@rafael.j.wysocki
[ rjw: Fix typo in new symbol name, drop redundant type cast from Rust binding ]
Tested-by: Shawn Guo <shawnguo@kernel.org> # with cpufreq-dt driver
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment::new::<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment::new::<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment::new::<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment::new::<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
|
|
Pull locking updates from Ingo Molnar:
"Mostly Rust runtime enhancements:
- Add initial support for generic LKMM atomic variables in Rust (Boqun Feng)
- Add the wrapper for `refcount_t` in Rust (Gary Guo)
- Add a new reviewer, Gary Guo"
* tag 'locking-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: update atomic infrastructure entry to include Rust
rust: block: convert `block::mq` to use `Refcount`
rust: convert `Arc` to use `Refcount`
rust: make `Arc::into_unique_or_drop` associated function
rust: implement `kernel::sync::Refcount`
rust: sync: Add memory barriers
rust: sync: atomic: Add Atomic<{usize,isize}>
rust: sync: atomic: Add Atomic<u{32,64}>
rust: sync: atomic: Add the framework of arithmetic operations
rust: sync: atomic: Add atomic {cmp,}xchg operations
rust: sync: atomic: Add generic atomics
rust: sync: atomic: Add ordering annotation types
rust: sync: Add basic atomic operation mapping framework
rust: Introduce atomic API helpers
|
|
Pull lsm updates from Paul Moore:
- Move the management of the LSM BPF security blobs into the framework
In order to enable multiple LSMs we need to allocate and free the
various security blobs in the LSM framework and not the individual
LSMs as they would end up stepping all over each other.
- Leverage the lsm_bdev_alloc() helper in lsm_bdev_alloc()
Make better use of our existing helper functions to reduce some code
duplication.
- Update the Rust cred code to use 'sync::aref'
Part of a larger effort to move the Rust code over to the 'sync'
module.
- Make CONFIG_LSM dependent on CONFIG_SECURITY
As the CONFIG_LSM Kconfig setting is an ordered list of the LSMs to
enable a boot, it obviously doesn't make much sense to enable this
when CONFIG_SECURITY is disabled.
- Update the LSM and CREDENTIALS sections in MAINTAINERS with Rusty
bits
Add the Rust helper files to the associated LSM and CREDENTIALS
entries int the MAINTAINERS file. We're trying to improve the
communication between the two groups and making sure we're all aware
of what is going on via cross-posting to the relevant lists is a good
way to start.
* tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: CONFIG_LSM can depend on CONFIG_SECURITY
MAINTAINERS: add the associated Rust helper to the CREDENTIALS section
MAINTAINERS: add the associated Rust helper to the LSM section
rust,cred: update AlwaysRefCounted import to sync::aref
security: use umax() to improve code
lsm,selinux: Add LSM blob support for BPF objects
lsm: use lsm_blob_alloc() in lsm_bdev_alloc()
|
|
Pull vfs rust updates from Christian Brauner:
"This contains a few minor vfs rust changes:
- Add the pid namespace Rust wrappers to the correct MAINTAINERS
entry
- Use to_result() in the Rust file error handling code
- Update imports for fs and pid_namespce Rust wrappers"
* tag 'vfs-6.18-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: file: use to_result for error handling
pid: add Rust files to MAINTAINERS
rust: fs: update ARef and AlwaysRefCounted imports from sync::aref
rust: pid_namespace: update AlwaysRefCounted imports from sync::aref
|
|
Merge energy model management, OPP (operating performance points) and
devfreq updates for 6.18-rc1:
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not sufficient
to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi devfreq
driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance in
the mtk-cci devfreq driver probe and remove a redundant condition from
an if () statement in that driver (Dan Carpenter, Liao Yuanhong)
* pm-em:
PM: EM: Fix late boot with holes in CPU topology
* pm-opp:
OPP: Add support to find OPP for a set of keys
rust: opp: use to_result for error handling
* pm-devfreq:
PM / devfreq: rockchip-dfi: add support for LPDDR5
PM / devfreq: rockchip-dfi: double count on RK3588
PM / devfreq: mtk-cci: avoid redundant conditions
PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()
|
|
The USB abstractions target to support USB interface drivers.
While internally the abstraction has to deal with the interface's parent
USB device, there shouldn't be a need for users to deal with the parent
USB device directly.
Functions, such as for preparing and sending USB URBs, can be
implemented for the usb::Interface structure directly. Whether this
internal implementation has to deal with the parent USB device can
remain transparent to USB interface drivers.
Hence, keep the usb::Device structure private for now, in order to avoid
confusion for users and to make it less likely to accidentally expose
APIs with unnecessary indirections.
Should we start supporting USB device drivers, or need it for any other
reason we do not foresee yet, it should be trivial to make it public
again.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250925190400.144699-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When deriving the parent USB device (struct usb_device) from a USB
interface (struct usb_interface), do not retain the device context.
For the Bound context, as pointed out by Alan in [1], it is not
guaranteed that the parent USB device is always bound when the interface
is bound.
The bigger problem, however, is that we can't infer the Core context,
since eventually it indicates that the device lock is held. However,
there is no guarantee that if the device lock of the interface is held,
also the device lock of the parent USB device is held.
Hence, fix this by not inferring any device context information; while
at it, fix up the (affected) safety comments.
Link: https://lore.kernel.org/all/0ff2a825-1115-426a-a6f9-df544cd0c5fc@rowland.harvard.edu/ [1]
Fixes: e7e2296b0ecf ("rust: usb: add basic USB abstractions")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250925190400.144699-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Display implementation for Vendor was forwarding directly to Debug
printing, resulting in raw hex values instead of PCI Vendor strings.
Improve things by doing a stringify!() call for each PCI Vendor item.
This now prints symbolic names such as "NVIDIA", instead of
"Vendor(0x10de)". It still falls back to Debug formatting for unknown
class values.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
[ Remove #[inline] for Vendor::fmt(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The Display implementation for Class was forwarding directly to Debug
printing, resulting in raw hex values instead of PCI Class strings.
Improve things by doing a stringify!() call for each PCI Class item.
This now prints symbolic names such as "DISPLAY_VGA", instead of
"Class(0x030000)". It still falls back to Debug formatting for unknown
class values.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The rust USB bindings as submitted are a good start, but they don't
really seem to be correct in a number of minor places, so just disable
them from the build entirely at this point in time. When they are ready
to be re-enabled, this commit can be reverted.
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Linus Torvalds
Rafael J. Wysocki
Boqun Feng
Miguel Ojeda
Siyuan Huang
Tamir Duberstein
Tamir Duberstein
Daniel Almeida
Danilo Krummrich
Tong Li
John Hubbard
Greg Kroah-Hartman