diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/obsolete/sysfs-selinux-disable | 26 | ||||
| -rw-r--r-- | Documentation/ABI/stable/sysfs-class-tpm | 33 | ||||
| -rw-r--r-- | Documentation/ABI/stable/sysfs-driver-dma-idxd | 171 | ||||
| -rw-r--r-- | Documentation/ABI/stable/sysfs-driver-mlxreg-io | 92 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-mdio | 63 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-devfreq | 18 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-system-cpu | 6 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-asus-wmi | 10 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-power | 13 |
9 files changed, 404 insertions, 28 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-selinux-disable b/Documentation/ABI/obsolete/sysfs-selinux-disable new file mode 100644 index 000000000000..c340278e3cf8 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-selinux-disable @@ -0,0 +1,26 @@ +What: /sys/fs/selinux/disable +Date: April 2005 (predates git) +KernelVersion: 2.6.12-rc2 (predates git) +Contact: selinux@vger.kernel.org +Description: + + The selinuxfs "disable" node allows SELinux to be disabled at runtime + prior to a policy being loaded into the kernel. If disabled via this + mechanism, SELinux will remain disabled until the system is rebooted. + + The preferred method of disabling SELinux is via the "selinux=0" boot + parameter, but the selinuxfs "disable" node was created to make it + easier for systems with primitive bootloaders that did not allow for + easy modification of the kernel command line. Unfortunately, allowing + for SELinux to be disabled at runtime makes it difficult to secure the + kernel's LSM hooks using the "__ro_after_init" feature. + + Thankfully, the need for the SELinux runtime disable appears to be + gone, the default Kconfig configuration disables this selinuxfs node, + and only one of the major distributions, Fedora, supports disabling + SELinux at runtime. Fedora is in the process of removing the + selinuxfs "disable" node and once that is complete we will start the + slow process of removing this code from the kernel. + + More information on /sys/fs/selinux/disable can be found under the + CONFIG_SECURITY_SELINUX_DISABLE Kconfig option. diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm index c0e23830f56a..58e94e7d55be 100644 --- a/Documentation/ABI/stable/sysfs-class-tpm +++ b/Documentation/ABI/stable/sysfs-class-tpm @@ -1,7 +1,7 @@ What: /sys/class/tpm/tpmX/device/ Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The device/ directory under a specific TPM instance exposes the properties of that TPM chip @@ -9,7 +9,7 @@ Description: The device/ directory under a specific TPM instance exposes What: /sys/class/tpm/tpmX/device/active Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "active" property prints a '1' if the TPM chip is accepting commands. An inactive TPM chip still contains all the state of an active chip (Storage Root Key, NVRAM, etc), and can be @@ -21,7 +21,7 @@ Description: The "active" property prints a '1' if the TPM chip is accepting What: /sys/class/tpm/tpmX/device/cancel Date: June 2005 KernelVersion: 2.6.13 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "cancel" property allows you to cancel the currently pending TPM command. Writing any value to cancel will call the TPM vendor specific cancel operation. @@ -29,7 +29,7 @@ Description: The "cancel" property allows you to cancel the currently What: /sys/class/tpm/tpmX/device/caps Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "caps" property contains TPM manufacturer and version info. Example output: @@ -46,7 +46,7 @@ Description: The "caps" property contains TPM manufacturer and version info. What: /sys/class/tpm/tpmX/device/durations Date: March 2011 KernelVersion: 3.1 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "durations" property shows the 3 vendor-specific values used to wait for a short, medium and long TPM command. All TPM commands are categorized as short, medium or long in @@ -69,7 +69,7 @@ Description: The "durations" property shows the 3 vendor-specific values What: /sys/class/tpm/tpmX/device/enabled Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "enabled" property prints a '1' if the TPM chip is enabled, meaning that it should be visible to the OS. This property may be visible but produce a '0' after some operation that @@ -78,7 +78,7 @@ Description: The "enabled" property prints a '1' if the TPM chip is enabled, What: /sys/class/tpm/tpmX/device/owned Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "owned" property produces a '1' if the TPM_TakeOwnership ordinal has been executed successfully in the chip. A '0' indicates that ownership hasn't been taken. @@ -86,7 +86,7 @@ Description: The "owned" property produces a '1' if the TPM_TakeOwnership What: /sys/class/tpm/tpmX/device/pcrs Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "pcrs" property will dump the current value of all Platform Configuration Registers in the TPM. Note that since these values may be constantly changing, the output is only valid @@ -109,7 +109,7 @@ Description: The "pcrs" property will dump the current value of all Platform What: /sys/class/tpm/tpmX/device/pubek Date: April 2005 KernelVersion: 2.6.12 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "pubek" property will return the TPM's public endorsement key if possible. If the TPM has had ownership established and is version 1.2, the pubek will not be available without the @@ -161,7 +161,7 @@ Description: The "pubek" property will return the TPM's public endorsement What: /sys/class/tpm/tpmX/device/temp_deactivated Date: April 2006 KernelVersion: 2.6.17 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "temp_deactivated" property returns a '1' if the chip has been temporarily deactivated, usually until the next power cycle. Whether a warm boot (reboot) will clear a TPM chip @@ -170,7 +170,7 @@ Description: The "temp_deactivated" property returns a '1' if the chip has What: /sys/class/tpm/tpmX/device/timeouts Date: March 2011 KernelVersion: 3.1 -Contact: tpmdd-devel@lists.sf.net +Contact: linux-integrity@vger.kernel.org Description: The "timeouts" property shows the 4 vendor-specific values for the TPM's interface spec timeouts. The use of these timeouts is defined by the TPM interface spec that the chip @@ -183,3 +183,14 @@ Description: The "timeouts" property shows the 4 vendor-specific values The four timeout values are shown in usecs, with a trailing "[original]" or "[adjusted]" depending on whether the values were scaled by the driver to be reported in usec from msecs. + +What: /sys/class/tpm/tpmX/tpm_version_major +Date: October 2019 +KernelVersion: 5.5 +Contact: linux-integrity@vger.kernel.org +Description: The "tpm_version_major" property shows the TCG spec major version + implemented by the TPM device. + + Example output: + + 2 diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd new file mode 100644 index 000000000000..f4be46cc6cb6 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd @@ -0,0 +1,171 @@ +What: sys/bus/dsa/devices/dsa<m>/cdev_major +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The major number that the character device driver assigned to + this device. + +What: sys/bus/dsa/devices/dsa<m>/errors +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The error information for this device. + +What: sys/bus/dsa/devices/dsa<m>/max_batch_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The largest number of work descriptors in a batch. + +What: sys/bus/dsa/devices/dsa<m>/max_work_queues_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum work queue size supported by this device. + +What: sys/bus/dsa/devices/dsa<m>/max_engines +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of engines supported by this device. + +What: sys/bus/dsa/devices/dsa<m>/max_groups +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of groups can be created under this device. + +What: sys/bus/dsa/devices/dsa<m>/max_tokens +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The total number of bandwidth tokens supported by this device. + The bandwidth tokens represent resources within the DSA + implementation, and these resources are allocated by engines to + support operations. + +What: sys/bus/dsa/devices/dsa<m>/max_transfer_size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The number of bytes to be read from the source address to + perform the operation. The maximum transfer size is dependent on + the workqueue the descriptor was submitted to. + +What: sys/bus/dsa/devices/dsa<m>/max_work_queues +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum work queue number that this device supports. + +What: sys/bus/dsa/devices/dsa<m>/numa_node +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The numa node number for this device. + +What: sys/bus/dsa/devices/dsa<m>/op_cap +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The operation capability bit mask specify the operation types + supported by the this device. + +What: sys/bus/dsa/devices/dsa<m>/state +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The state information of this device. It can be either enabled + or disabled. + +What: sys/bus/dsa/devices/dsa<m>/group<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned group under this device. + +What: sys/bus/dsa/devices/dsa<m>/engine<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned engine under this device. + +What: sys/bus/dsa/devices/dsa<m>/wq<m>.<n> +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The assigned work queue under this device. + +What: sys/bus/dsa/devices/dsa<m>/configurable +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: To indicate if this device is configurable or not. + +What: sys/bus/dsa/devices/dsa<m>/token_limit +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The maximum number of bandwidth tokens that may be in use at + one time by operations that access low bandwidth memory in the + device. + +What: sys/bus/dsa/devices/wq<m>.<n>/group_id +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The group id that this work queue belongs to. + +What: sys/bus/dsa/devices/wq<m>.<n>/size +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The work queue size for this work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/type +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The type of this work queue, it can be "kernel" type for work + queue usages in the kernel space or "user" type for work queue + usages by applications in user space. + +What: sys/bus/dsa/devices/wq<m>.<n>/cdev_minor +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The minor number assigned to this work queue by the character + device driver. + +What: sys/bus/dsa/devices/wq<m>.<n>/mode +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The work queue mode type for this work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/priority +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The priority value of this work queue, it is a vlue relative to + other work queue in the same group to control quality of service + for dispatching work from multiple workqueues in the same group. + +What: sys/bus/dsa/devices/wq<m>.<n>/state +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The current state of the work queue. + +What: sys/bus/dsa/devices/wq<m>.<n>/threshold +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The number of entries in this work queue that may be filled + via a limited portal. + +What: sys/bus/dsa/devices/engine<m>.<n>/group_id +Date: Oct 25, 2019 +KernelVersion: 5.6.0 +Contact: dmaengine@vger.kernel.org +Description: The group that this engine belongs to. diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 8ca498447aeb..b0d90cc696a8 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -1,5 +1,4 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health - Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -19,7 +18,6 @@ Description: These files show with which CPLD versions have been burned The files are read only. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir - Date: December 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -29,18 +27,16 @@ Description: This file shows the system fans direction: The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable - +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> Description: These files show with which CPLD versions have been burned - on LED board. + on LED or Gearbox board. The files are read only. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable - Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -108,7 +104,6 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail - Date: November 2018 KernelVersion: 5.0 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -121,6 +116,21 @@ Description: These files show the system reset cause, as following: ComEx The files are read only. +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on LED board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd Date: June 2019 KernelVersion: 5.3 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -134,9 +144,65 @@ Description: These files show the system reset cause, as following: The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show system static topology identification + like system's static I2C topology, number and type of FPGA + devices within the system and so on. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset causes, as following: reset + due to AC power failure, reset invoked from software by + assertion reset signal through CPLD. reset caused by signal + asserted by SOC through ACPI register, reset invoked from + software by assertion power off signal through CPLD. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows to retain ASIC up during PCIe root complex + reset, when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows to overwrite system VPD hardware wrtie + protection when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file exposes the configuration update status of burnable + voltage regulator devices. The status values are as following: + 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file exposes the firmware version of burnable voltage + regulator devices. + + The file is read only. diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio new file mode 100644 index 000000000000..da86efc7781b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-mdio @@ -0,0 +1,63 @@ +What: /sys/bus/mdio_bus/devices/.../statistics/ +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + This folder contains statistics about global and per + MDIO bus address statistics. + +What: /sys/bus/mdio_bus/devices/.../statistics/transfers +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfers for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/errors +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfer errors for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/writes +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of write transactions for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/reads +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of read transactions for this MDIO bus. + +What: /sys/bus/mdio_bus/devices/.../statistics/transfers_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfers for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/errors_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of transfer errors for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/writes_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of write transactions for this MDIO bus address. + +What: /sys/bus/mdio_bus/devices/.../statistics/reads_<addr> +Date: January 2020 +KernelVersion: 5.6 +Contact: netdev@vger.kernel.org +Description: + Total number of read transactions for this MDIO bus address. diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 01196e19afca..9758eb85ade3 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -7,6 +7,13 @@ Description: The name of devfreq object denoted as ... is same as the name of device using devfreq. +What: /sys/class/devfreq/.../name +Date: November 2019 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq/.../name shows the name of device + of the corresponding devfreq object. + What: /sys/class/devfreq/.../governor Date: September 2011 Contact: MyungJoo Ham <myungjoo.ham@samsung.com> @@ -48,12 +55,15 @@ What: /sys/class/devfreq/.../trans_stat Date: October 2012 Contact: MyungJoo Ham <myungjoo.ham@samsung.com> Description: - This ABI shows the statistics of devfreq behavior on a - specific device. It shows the time spent in each state and - the number of transitions between states. + This ABI shows or clears the statistics of devfreq behavior + on a specific device. It shows the time spent in each state + and the number of transitions between states. In order to activate this ABI, the devfreq target device driver should provide the list of available frequencies - with its profile. + with its profile. If need to reset the statistics of devfreq + behavior on a specific device, enter 0(zero) to 'trans_stat' + as following: + echo 0 > /sys/class/devfreq/.../trans_stat What: /sys/class/devfreq/.../userspace/set_freq Date: September 2011 diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index fc20cde63d1e..2e0e3b45d02a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -196,6 +196,12 @@ Description: does not reflect it. Likewise, if one enables a deep state but a lighter state still is disabled, then this has no effect. +What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/default_status +Date: December 2019 +KernelVersion: v5.6 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: + (RO) The default status of this state, "enabled" or "disabled". What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/residency Date: March 2014 diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 9e99f2909612..1efac0ddb417 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -46,3 +46,13 @@ Description: * 0 - normal, * 1 - overboost, * 2 - silent + +What: /sys/devices/platform/<platform>/throttle_thermal_policy +Date: Dec 2019 +KernelVersion: 5.6 +Contact: "Leonid Maksymchuk" <leonmaxx@gmail.com> +Description: + Throttle thermal policy mode: + * 0 - default, + * 1 - overboost, + * 2 - silent diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 6f87b9dd384b..5e6ead29124c 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -407,3 +407,16 @@ Contact: Kalesh Singh <kaleshsingh96@gmail.com> Description: The /sys/power/suspend_stats/last_failed_step file contains the last failed step in the suspend/resume path. + +What: /sys/power/sync_on_suspend +Date: October 2019 +Contact: Jonas Meurer <jonas@freesources.org> +Description: + This file controls whether or not the kernel will sync() + filesystems during system suspend (after freezing user space + and before suspending devices). + + Writing a "1" to this file enables the sync() and writing a "0" + disables it. Reads from the file return the current value. + The default is "1" if the build-time "SUSPEND_SKIP_SYNC" config + flag is unset, or "0" otherwise. |