aboutsummaryrefslogtreecommitdiffstats
path: root/hw/ppc/spapr_cpu_core.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ppc: Add has_smt_siblings property to CPUPPCStateNicholas Piggin2024-07-261-3/+9
| | | | | | | | | | | The decision to branch out to a slower SMT path in instruction emulation will become a bit more complicated with the way that "big-core" topology that will be implemented in subsequent changes. Hide these details from the wider CPU emulation code with a bool has_smt_siblings flag that can be set by machine initialisation. Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc: Add a core_index to CPUPPCState for SMT vCPUsNicholas Piggin2024-07-261-0/+4
| | | | | | | | | | | | The way SMT thread siblings are matched is clunky, using hard-coded logic that checks the PIR SPR. Change that to use a new core_index variable in the CPUPPCState, where all siblings have the same core_index. CPU realize routines have flexibility in setting core/sibling topology. Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc: Drop support for POWER9 and POWER10 DD1 chipsNicholas Piggin2024-03-131-2/+0
| | | | | | | | The POWER9 DD1 and POWER10 DD1 chips are not public and are no longer of any use in QEMU. Remove them. Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* spapr: set MSR[ME] and MSR[FP] on client entryNicholas Piggin2024-03-131-1/+5
| | | | | | | | The initial MSR state for the OpenFirmware binding specifies MSR[ME] and MSR[FP] are set. Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc/spapr_cpu: Use qdev_is_realized() instead of QOM APIPhilippe Mathieu-Daudé2024-02-221-2/+1
| | | | | | | | Prefer QDev API for QDev objects, avoid the underlying QOM layer. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20240216110313.17039-4-philmd@linaro.org>
* target/ppc/cpu-models: Rename power5+ and power7+ for new QOM naming rulesThomas Huth2024-02-051-2/+2
| | | | | | | | | | | | | | | The character "+" is now forbidden in QOM device names (see commit b447378e1217 - "Limit type names to alphanumerical and some few special characters"). For the "power5+" and "power7+" CPU names, there is currently a hack in type_name_is_valid() to still allow them for compatibility reasons. However, there is a much nicer solution for this: Simply use aliases! This way we can still support the old names without the need for the ugly hack in type_name_is_valid(). Message-ID: <20240117141054.73841-2-thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/ppc/spapr_cpu_core: Access QDev properties with proper APIPhilippe Mathieu-Daudé2024-01-051-1/+1
| | | | | | | | | | | CPUState::start_powered_off field is part of the internal implementation of a QDev CPU. It is exposed as the QDev "start-powered-off" property. External components should use the qdev properties API to access it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20231123143813.42632-2-philmd@linaro.org>
* hw/ppc: Constify VMStateRichard Henderson2023-12-301-6/+6
| | | | | Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-48-richard.henderson@linaro.org>
* hw/ppc: Reset timebase facilities on machine resetNicholas Piggin2023-09-061-0/+2
| | | | | | | | | | | | | | Lower interrupts, delete timers, and set time facility registers back to initial state on machine reset. This is not so important for record-replay since timebase and decrementer are migrated, but it gives a cleaner reset state. Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [ clg: checkpatch.pl fixes ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
* target/ppc: Add LPAR-per-core vs per-thread mode flagNicholas Piggin2023-07-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Power ISA has the concept of sub-processors: Hardware is allowed to sub-divide a multi-threaded processor into "sub-processors" that appear to privileged programs as multi-threaded processors with fewer threads. POWER9 and POWER10 have two modes, either every thread is a sub-processor or all threads appear as one multi-threaded processor. In the user manuals these are known as "LPAR per thread" / "Thread LPAR", and "LPAR per core" / "1 LPAR", respectively. The practical difference is: in thread LPAR mode, non-hypervisor SPRs are not shared between threads and msgsndp can not be used to message siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable. Thrad LPAR allows multiple partitions to run concurrently on the same core, and is a requirement for KVM to run on POWER9/10 (which does not gang-schedule an LPAR on all threads of a core like POWER8 KVM). Traditionally, SMT in PAPR environments including PowerVM and the pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode. In OPAL systems, Thread LPAR is used. When adding SMT to the powernv machine, it is therefore preferable to emulate Thread LPAR. To account for this difference between pseries and powernv, an LPAR mode flag is added such that SPRs can be implemented as per-LPAR shared, and that becomes either per-thread or per-core depending on the flag. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-ID: <20230705120631.27670-2-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* spapr: TCG allow up to 8-thread SMT on POWER8 and newer CPUsNicholas Piggin2023-06-251-2/+5
| | | | | | | | | | | | | | | | | PPC TCG supports SMT CPU configurations for non-hypervisor state, so permit POWER8-10 pseries machines to enable SMT. This requires PIR and TIR be set, because that's how sibling thread matching is done by TCG. spapr's nested-HV capability does not currently coexist with SMT, so that combination is prohibited (interestingly somewhat analogous to LPAR-per-core mode on real hardware which also does not support KVM). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: Also test smp_threads when checking for POWER8 CPU and above ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
* target/ppc: Add POWER9 DD2.2 modelNicholas Piggin2023-05-281-0/+1
| | | | | | | | | | | | | | | | | POWER9 DD2.1 and earlier had significant limitations when running KVM, including lack of "mixed mode" MMU support (ability to run HPT and RPT mode on threads of the same core), and a translation prefetch issue which is worked around by disabling "AIL" mode for the guest. These processors are not widely available, and it's difficult to deal with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU and make it the default POWER9 CPU. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20230515160201.394587-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* hw/ppc: free env->tb_env in spapr_unrealize_vcpu()Daniel Henrique Barboza2022-04-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timebase is allocated during spapr_realize_vcpu() and it's not freed. This results in memory leaks when doing vcpu unplugs: ==636935== ==636935== 144 (96 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 6 ,461 of 8,135 ==636935== at 0x4897468: calloc (vg_replace_malloc.c:760) ==636935== by 0x5077213: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.4) ==636935== by 0x507757F: g_malloc0_n (in /usr/lib64/libglib-2.0.so.0.6400.4) ==636935== by 0x93C3FB: cpu_ppc_tb_init (ppc.c:1066) ==636935== by 0x97BC2B: spapr_realize_vcpu (spapr_cpu_core.c:268) ==636935== by 0x97C01F: spapr_cpu_core_realize (spapr_cpu_core.c:337) ==636935== by 0xD4626F: device_set_realized (qdev.c:531) ==636935== by 0xD55273: property_set_bool (object.c:2273) ==636935== by 0xD523DF: object_property_set (object.c:1408) ==636935== by 0xD588B7: object_property_set_qobject (qom-qobject.c:28) ==636935== by 0xD52897: object_property_set_bool (object.c:1477) ==636935== by 0xD4579B: qdev_realize (qdev.c:333) ==636935== This patch adds a cpu_ppc_tb_free() helper in hw/ppc/ppc.c to allow us to free the timebase. This leak is then solved by calling cpu_ppc_tb_free() in spapr_unrealize_vcpu(). Fixes: 6f4b5c3ec590 ("spapr: CPU hot unplug support") Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20220329124545.529145-2-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* spapr: prevent hdec timer being set up under virtual hypervisorNicholas Piggin2022-02-181-3/+3
| | | | | | | | | | | The spapr virtual hypervisor does not require the hdecr timer. Remove it. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20220216102545.1808018-3-npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* spapr: Force 32bit when resetting a coreAlexey Kardashevskiy2022-01-281-0/+5
| | | | | | | | | | | | | | | | | "PowerPC Processor binding to IEEE 1275" says in "8.2.1. Initial Register Values" that the initial state is defined as 32bit so do it for both SLOF and VOF. This should not cause behavioral change as SLOF switches to 64bit very early anyway. As nothing enforces LE anywhere, this drops it for VOF. The goal is to make VOF work with TCG as otherwise it barfs with qemu: fatal: TCG hflags mismatch (current:0x6c000004 rebuilt:0x6c000000) Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220107072423.2278113-1-aik@ozlabs.ru> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* target/ppc: introduce PMUEventType and PMU overflow timersDaniel Henrique Barboza2021-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch starts an IBM Power8+ compatible PMU implementation by adding the representation of PMU events that we are going to sample, PMUEventType. This enum represents a Perf event that is being sampled by a specific counter 'sprn'. Events that aren't available (i.e. no event was set in MMCR1) will be of type 'PMU_EVENT_INVALID'. Events that are inactive due to frozen counter bits state are of type 'PMU_EVENT_INACTIVE'. Other types added in this patch are PMU_EVENT_CYCLES and PMU_EVENT_INSTRUCTIONS. More types will be added later on. Let's also add the required PMU cycle overflow timers. They will be used to trigger cycle overflows when cycle events are being sampled. This timer will call cpu_ppc_pmu_timer_cb(), which in turn calls fire_PMC_interrupt(). Both functions are stubs that will be implemented later on when EBB support is added. Two new helper files are created to host this new logic. cpu_ppc_pmu_init() will init all overflow timers during CPU init time. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20211201151734.654994-2-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* ppc/spapr: Add a POWER10 DD2 CPUCédric Le Goater2021-09-291-0/+1
| | | | | | | Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901094153.227671-3-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr_cpu_core.c: use g_auto* in spapr_create_vcpu()Daniel Henrique Barboza2021-01-191-9/+3
| | | | | | | | | Use g_autoptr() with Object and g_autofree with the string to avoid the need of a cleanup path. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210114180628.1675603-6-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize()Greg Kurz2020-10-281-13/+3
| | | | | | | | | | | | Now that the error path of spapr_cpu_core_realize() is just to call idempotent spapr_cpu_core_unrealize() for rollback, no need to create and realize the vCPUs in two separate loops. Merge them and do them same in spapr_cpu_core_unrealize() for symmetry. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279673321.1808373.2248221100790367912.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Make spapr_cpu_core_unrealize() idempotentGreg Kurz2020-10-281-20/+21
| | | | | | | | | | | | | | | | | spapr_cpu_core_realize() has a rollback path which partially duplicates the code of spapr_cpu_core_unrealize(). Let's make spapr_cpu_core_unrealize() idempotent and call it instead. This requires to: - move the registration and unregistration of the reset handler around but it is harmless, - allocate the array of vCPUs with g_new0() to be able to filter out unused slots, - make sure to only unrealize vCPUs that have been already realized. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279672626.1808373.14142129300586424514.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Drop spapr_delete_vcpu() unused argumentGreg Kurz2020-10-281-3/+3
| | | | | | | | The 'sc' argument is unused. Drop it. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279671929.1808373.10333672533575251075.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Unrealize vCPUs with qdev_unrealize()Greg Kurz2020-10-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we introduced CPU hot-unplug in sPAPR, we don't unrealize the vCPU objects explicitly. Instead, we let QOM handle that for us under object_property_del_all() when the CPU core object is finalized. The only thing we do is calling cpu_remove_sync() to tear the vCPU thread down. This happens to work but it is ugly because: - we call qdev_realize() but the corresponding qdev_unrealize() is buried deep in the QOM code - we call cpu_remove_sync() to undo qemu_init_vcpu() called by ppc_cpu_realize() in target/ppc/translate_init.c.inc - the CPU init and teardown paths aren't really symmetrical The latter didn't bite us so far but a future patch that greatly simplifies the CPU core realize path needs it to avoid a crash in QOM. For all these reasons, have ppc_cpu_unrealize() to undo the changes of ppc_cpu_realize() by calling cpu_remove_sync() at the right place, and have the sPAPR CPU core code to call qdev_unrealize(). This requires to add a missing stub because translate_init.c.inc is also compiled for user mode. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279671236.1808373.14732005038172874990.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Fix leak of CPU machine specific dataGreg Kurz2020-10-281-10/+12
| | | | | | | | | | | | | When a CPU core is being removed, the machine specific data of each CPU thread object is leaked. Fix this by calling the dedicated helper we have for that instead of simply unparenting the CPU object. Call it from a separate loop in spapr_cpu_core_unrealize() for symmetry with spapr_cpu_core_realize(). Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160279670540.1808373.17319746576919615623.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Simplify error handling in spapr_cpu_core_realize()Greg Kurz2020-10-091-9/+7
| | | | | | | | | | | | As recommended in "qapi/error.h", add a bool return value to spapr_realize_vcpu() and use it in spapr_cpu_core_realize() in order to get rid of the error propagation overhead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20200914123505.612812-12-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Add a return value to spapr_set_vcpu_id()Greg Kurz2020-10-091-4/+1
| | | | | | | | | | | As recommended in "qapi/error.h", return true on success and false on failure. This allows to reduce error propagation overhead in the callers. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20200914123505.612812-11-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Fix error leak in spapr_realize_vcpu()Greg Kurz2020-10-091-2/+1
| | | | | | | | | | | | | If spapr_irq_cpu_intc_create() fails, local_err isn't propagated and thus leaked. Fixes: 992861fb1e4c ("error: Eliminate error_propagate() manually") Cc: armbru@redhat.com Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20200914123505.612812-2-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* ppc/spapr: Use start-powered-off CPUState propertyThiago Jung Bauermann2020-09-081-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PowerPC sPAPR CPUs start in the halted state, and spapr_reset_vcpu() attempts to implement this by setting CPUState::halted to 1. But that's too late for the case of hotplugged CPUs in a machine configure with 2 or more threads per core. By then, other parts of QEMU have already caused the vCPU to run in an unitialized state a couple of times. For example, ppc_cpu_reset() calls ppc_tlb_invalidate_all(), which ends up calling async_run_on_cpu(). This kicks the new vCPU while it has CPUState::halted = 0, causing QEMU to issue a KVM_RUN ioctl on the new vCPU before the guest is able to make the start-cpu RTAS call to initialize its register state. This problem doesn't seem to cause visible issues for regular guests, but on a secure guest running under the Ultravisor it does. The Ultravisor relies on being able to snoop on the start-cpu RTAS call to map vCPUs to guests, and this issue causes it to see a stray vCPU that doesn't belong to any guest. Fix by setting the start-powered-off CPUState property in spapr_create_vcpu(), which makes cpu_common_reset() initialize CPUState::halted to 1 at an earlier moment. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Message-Id: <20200826055535.951207-4-bauerman@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* error: Eliminate error_propagate() manuallyMarkus Armbruster2020-07-101-10/+4
| | | | | | | | | | | When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous two commits did that for sufficiently simple cases with Coccinelle. Do it for several more manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-37-armbru@redhat.com>
* qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster2020-07-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
* qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
* ppc/spapr: add a POWER10 CPU modelCédric Le Goater2020-05-271-0/+1
| | | | | | Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200507073855.2485680-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* qdev: Unrealize must not failMarkus Armbruster2020-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
* qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster2020-05-151-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
* ppc/spapr: Move GPRs setup to one placeAlexey Kardashevskiy2020-03-171-1/+5
| | | | | | | | | | | | | | | | | At the moment "pseries" starts in SLOF which only expects the FDT blob pointer in r3. As we are going to introduce a OpenFirmware support in QEMU, we will be booting OF clients directly and these expect a stack pointer in r1, Linux looks at r3/r4 for the initramdisk location (although vmlinux can find this from the device tree but zImage from distro kernels cannot). This extends spapr_cpu_set_entry_state() to take more registers. This should cause no behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20200310050733.29805-2-aik@ozlabs.ru> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr, ppc: Remove VPM0/RMLS hacks for POWER9David Gibson2020-03-171-9/+1
| | | | | | | | | | | | | | | | | | | | | | For the "pseries" machine, we use "virtual hypervisor" mode where we only model the CPU in non-hypervisor privileged mode. This means that we need guest physical addresses within the modelled cpu to be treated as absolute physical addresses. We used to do that by clearing LPCR[VPM0] and setting LPCR[RMLS] to a high limit so that the old offset based translation for guest mode applied, which does what we need. However, POWER9 has removed support for that translation mode, which meant we had some ugly hacks to keep it working. We now explicitly handle this sort of translation for virtual hypervisor mode, so the hacks aren't necessary. We don't need to set VPM0 and RMLS from the machine type code - they're now ignored in vhyp mode. On the cpu side we don't need to allow LPCR[RMLS] to be set on POWER9 in vhyp mode - that was only there to allow the hack on the machine side. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ppc: Add intc_destroy() handlers to SpaprInterruptController/PnvChipGreg Kurz2019-11-181-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | SpaprInterruptControllerClass and PnvChipClass have an intc_create() method that calls the appropriate routine, ie. icp_create() or xive_tctx_create(), to establish the link between the VCPU and the presenter component of the interrupt controller during realize. There aren't any symmetrical call to be called when the VCPU gets unrealized though. It is assumed that object_unparent() is the only thing to do. This is questionable because the parenting logic around the CPU and presenter objects is really an implementation detail of the interrupt controller. It shouldn't be open-coded in the machine code. Fix this by adding an intc_destroy() method that undoes what was done in intc_create(). Also NULLify the presenter pointers to avoid having stale pointers around. This will allow to reliably check if a vCPU has a valid presenter. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157192724208.3146912.7254684777515287626.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
* ppc: Reset the interrupt presenter from the CPU reset handlerCédric Le Goater2019-10-241-1/+4
| | | | | | | | | | | | | | | | | | | | | On the sPAPR machine and PowerNV machine, the interrupt presenters are created by a machine handler at the core level and are reset independently. This is not consistent and it raises issues when it comes to handle hot-plugged CPUs. In that case, the presenters are not reset. This is less of an issue in XICS, although a zero MFFR could be a concern, but in XIVE, the OS CAM line is not set and this breaks the presenting algorithm. The current code has workarounds which need a global cleanup. Extend the sPAPR IRQ backend and the PowerNV Chip class with a new cpu_intc_reset() handler called by the CPU reset handler and remove the XiveTCTX reset handler which is now redundant. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-6-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr_cpu_core: Implement DeviceClass::resetGreg Kurz2019-10-241-9/+28
| | | | | | | | | | | | | | | | | | | | | | | Since vCPUs aren't plugged into a bus, we manually register a reset handler for each vCPU. We also call this handler at realize time to ensure hot plugged vCPUs are reset before being exposed to the guest. This results in vCPUs being reset twice at machine reset. It doesn't break anything but it is slightly suboptimal and above all confusing. The hotplug path in device_set_realized() already knows how to reset a hotplugged device if the device reset handler is present. Implement one for sPAPR CPU cores that resets all vCPUs under a core. While here rename spapr_cpu_reset() to spapr_reset_vcpu() for consistency with spapr_realize_vcpu() and spapr_unrealize_vcpu(). Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [clg: add documentation on the reset helper usage ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: move CPU reset after presenter creationCédric Le Goater2019-10-241-6/+8
| | | | | | | | | | | | This change prepares ground for future changes which will reset the interrupt presenter in the reset handler of the sPAPR and PowerNV cores. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr, xics, xive: Move cpu_intc_create from SpaprIrq to SpaprInterruptControllerDavid Gibson2019-10-241-2/+1
| | | | | | | | | | | | | | | | This method essentially represents code which belongs to the interrupt controller, but needs to be called on all possible intcs, rather than just the currently active one. The "dual" version therefore calls into the xics and xive versions confusingly. Handle this more directly, by making it instead a method on the intc backend, and always calling it on every backend that exists. While we're there, streamline the error reporting a bit. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
* spapr: Set compat mode in spapr_core_plug()Greg Kurz2019-08-291-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | A recent change in spapr_machine_reset() showed that resetting the compat mode in spapr_machine_reset() for the boot vCPU and in spapr_cpu_reset() for all other vCPUs was fragile. The fix was thus to reset the compat mode for all vCPUs in spapr_machine_reset(), but we still have to propagate it to hot-plugged CPUs. This is still performed from spapr_cpu_reset(), hence resulting in ppc_set_compat() being called twice for every vCPU at machine reset. Apart from wasting cycles, which isn't really an issue during machine reset, this seems to indicate that spapr_cpu_reset() isn't the best place to set the compat mode. A natural candidate for CPU-hotplug specific code is spapr_core_plug(). Also, it sits in the same file as spapr_machine_reset() : this makes it easier for someone who wants to know when the compat PVR is set. Call ppc_set_compat() from there. This doesn't need to be done for initial vCPUs since the compat PVR is 0 and spapr_machine_reset() sets the appropriate value later. No need to do this on manually added vCPUS on the destination QEMU during migration since the compat PVR is part of the migrated vCPU state. Both conditions can be checked with spapr_drc_hotplugged(). Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <156701285312.499757.7807417667750711711.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* pseries: Fix compat_pvr on resetLaurent Vivier2019-08-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | If we a migrate P8 machine to a P9 machine, the migration fails on destination with: error while loading state for instance 0x1 of device 'cpu' load of migration failed: Operation not permitted This is caused because the compat_pvr field is only present for the first CPU. Originally, spapr_machine_reset() calls ppc_set_compat() to set the value max_compat_pvr for the first cpu and this was propagated to all CPUs by spapr_cpu_reset(). Now, as spapr_cpu_reset() is called before that, the value is not propagated to all CPUs and the migration fails. To fix that, propagate the new value to all CPUs in spapr_machine_reset(). Fixes: 25c9780d38d4 ("spapr: Reset CAS & IRQ subsystem after devices") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20190826090812.19080-1-lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Include hw/boards.h a bit lessMarkus Armbruster2019-08-161-1/+0
| | | | | | | | | | | | | | | | hw/boards.h pulls in almost 60 headers. The less we include it into headers, the better. As a first step, drop superfluous inclusions, and downgrade some more to what's actually needed. Gets rid of just one inclusion into a header. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include migration/vmstate.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include sysemu/reset.h a lot lessMarkus Armbruster2019-08-161-0/+2
| | | | | | | | | | | | | | | | | | In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
* target/ppc: Set PSSCR_EC on cpu halt to prevent spurious wakeupSuraj Jitindar Singh2019-05-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The processor stop status and control register (PSSCR) is used to control the power saving facilities of the thread. The exit criterion bit (EC) is used to specify whether the thread should be woken by any interrupt (EC == 0) or only an interrupt enabled in the LPCR to wake the thread (EC == 1). The rtas facilities start-cpu and self-stop are used to transition a vcpu between the stopped and running states. When a vcpu is stopped it may only be started again by the start-cpu rtas call. Currently a vcpu in the stopped state will start again whenever an interrupt comes along due to PSSCR_EC being cleared, and while this is architecturally correct for a hardware thread, a vcpu is expected to only be woken by calling start-cpu. This means when performing a reboot on a tcg machine that the secondary threads will restart while the primary is still in slof, this is unsupported and causes call traces like: SLOF ********************************************************************** QEMU Starting Build Date = Jan 14 2019 18:00:39 FW Version = git-a5b428e1c1eae703 Press "s" to enter Open Firmware. qemu: fatal: Trying to deliver HV exception (MSR) 70 with no HV support NIP 6d61676963313230 LR 000000003dbe0308 CTR 6d61676963313233 XER 0000000000000000 CPU#1 MSR 0000000000000000 HID0 0000000000000000 HF 0000000000000000 iidx 3 didx 3 TB 00000026 115746031956 DECR 18446744073326238463 GPR00 000000003dbe0308 000000003e669fe0 000000003dc10700 0000000000000003 GPR04 000000003dc62198 000000003dc62178 000000003dc0ea48 0000000000000030 GPR08 000000003dc621a8 0000000000000018 000000003e466008 000000003dc50700 GPR12 c00000000093a4e0 c00000003ffff300 c00000003e533f90 0000000000000000 GPR16 0000000000000000 0000000000000000 000000003e466010 000000003dc0b040 GPR20 0000000000008000 000000000000f003 0000000000000006 000000003e66a050 GPR24 000000003dc06400 000000003dc0ae70 0000000000000003 000000000000f001 GPR28 000000003e66a060 ffffffffffffffff 6d61676963313233 0000000000000028 CR 28000222 [ E L - - - E E E ] RES ffffffffffffffff FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR08 0000000000000000 0000000000000000 0000000000000000 00000000311825e0 FPR12 00000000311825e0 0000000000000000 0000000000000000 0000000000000000 FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000 FPSCR 0000000000000000 SRR0 000000003dbe06b0 SRR1 0000000000080000 PVR 00000000004e1200 VRSAVE 0000000000000000 SPRG0 000000003dbe0308 SPRG1 000000003e669fe0 SPRG2 00000000000000d8 SPRG3 000000003dbe0308 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 6d61676963313230 HSRR1 0000000000000000 CFAR 000000003dbe3e64 LPCR 0000000004020008 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 Aborted (core dumped) To fix this, set the PSSCR_EC bit when a vcpu is stopped to disable it from coming back online until the start-cpu rtas call is made. Fixes: 21c0d66a9c99 ("target/ppc: Fix support for "STOP light" states on POWER9") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190516005744.24366-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: Use CamelCase properlyDavid Gibson2019-03-121-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* spapr: move the interrupt presenters under machine_dataCédric Le Goater2019-02-041-4/+4
| | | | | | | | Next step is to remove them from under the PowerPCCPU Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.