aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp3/top
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp3/top')
-rw-r--r--fpga/usrp3/top/x400/cpld/reconfig_engine.v9
-rw-r--r--fpga/usrp3/top/x400/dboards/ctrlport_byte_deserializer.v91
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/.gitignore8
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile51
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile.zbx_cpld.inc5
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_left.htm3
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_right.htm154
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/build.tcl22
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.ipx8
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.lpc87
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.v100
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll_tmpl.v7
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.ldf95
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.lpf803
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.sty205
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/basic_regs.v29
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/dsa_control.v22
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/led_control.v11
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/switch_control.v14
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/regmap/basic_regs_regmap_utils.vh15
-rw-r--r--fpga/usrp3/top/x400/dboards/zbx/cpld/zbx_top_cpld.v133
21 files changed, 1788 insertions, 84 deletions
diff --git a/fpga/usrp3/top/x400/cpld/reconfig_engine.v b/fpga/usrp3/top/x400/cpld/reconfig_engine.v
index fc6a4837e..6674cc693 100644
--- a/fpga/usrp3/top/x400/cpld/reconfig_engine.v
+++ b/fpga/usrp3/top/x400/cpld/reconfig_engine.v
@@ -73,7 +73,7 @@ module reconfig_engine #(
`include "regmap/reconfig_regmap_utils.vh"
`include "../../../lib/rfnoc/core/ctrlport.vh"
- // Check MAX10 variant target (10M04 or 10M08)
+ // Check MAX10 variant target (10M04, 10M08 or XO3)
`ifdef VARIANT_10M04
localparam FLASH_PRIMARY_IMAGE_START_ADDR_MEM_INIT = FLASH_PRIMARY_IMAGE_START_ADDR_MEM_INIT_10M04;
localparam FLASH_PRIMARY_IMAGE_START_ADDR = FLASH_PRIMARY_IMAGE_START_ADDR_10M04;
@@ -86,6 +86,13 @@ module reconfig_engine #(
localparam FLASH_PRIMARY_IMAGE_END_ADDR = FLASH_PRIMARY_IMAGE_END_ADDR_10M08;
localparam CFM0_WP_OFFSET_MSB = 27; // From Max 10 Flash Memory User Guide.
localparam CFM0_WP_OFFSET_LSB = 25; // From Max 10 Flash Memory User Guide.
+ // The reconfiguration engine via flash is not supported in the XO3 variant.
+ `elsif VARIANT_XO3
+ localparam FLASH_PRIMARY_IMAGE_START_ADDR_MEM_INIT = 0;
+ localparam FLASH_PRIMARY_IMAGE_START_ADDR = 0;
+ localparam FLASH_PRIMARY_IMAGE_END_ADDR = 0;
+ localparam CFM0_WP_OFFSET_MSB = 0;
+ localparam CFM0_WP_OFFSET_LSB = 0;
`else
ERROR_MAX10_variant_must_be_defined();
localparam FLASH_PRIMARY_IMAGE_START_ADDR_MEM_INIT = FLASH_PRIMARY_IMAGE_START_ADDR_MEM_INIT_10M04;
diff --git a/fpga/usrp3/top/x400/dboards/ctrlport_byte_deserializer.v b/fpga/usrp3/top/x400/dboards/ctrlport_byte_deserializer.v
index b8fde0025..9e7e89c77 100644
--- a/fpga/usrp3/top/x400/dboards/ctrlport_byte_deserializer.v
+++ b/fpga/usrp3/top/x400/dboards/ctrlport_byte_deserializer.v
@@ -8,12 +8,18 @@
// Description:
// Slave interface of CtrlPort interface serialized as byte stream.
// See description in ctrlport_byte_serializer module for more details.
+// Input and output data may be driven/registered using clocks with
+// different phases (but same frequency), this allows the capability
+// to facilitate meeting timing on this interface.
//
`default_nettype none
module ctrlport_byte_deserializer (
+ // clock domain used to register input data
input wire ctrlport_clk,
+ // clock domain used to drive output data
+ input wire ctrlport_clk_adjusted,
input wire ctrlport_rst,
// Request
@@ -58,17 +64,19 @@ module ctrlport_byte_deserializer (
localparam SENDING = 2'd3;
// internal registers
- reg [ 1:0] state = INIT_RX;
- reg [NUM_BYTES_RX_WRITE*8-1:0] request_cache = {NUM_BYTES_RX_WRITE*8 {1'b0}};
- reg [ NUM_BYTES_TX_READ*8-1:0] response_cache = {NUM_BYTES_TX_READ*8 {1'b0}};
- reg [ 2:0] byte_counter = 3'b0;
- reg transfer_complete = 1'b0;
- reg write_transfer = 1'b0;
+ reg [ 1:0] state = INIT_RX;
+ reg [NUM_BYTES_RX_WRITE*8-1:0] request_cache = {NUM_BYTES_RX_WRITE*8 {1'b0}};
+ reg [ NUM_BYTES_TX_READ*8-1:0] response_cache = {NUM_BYTES_TX_READ*8 {1'b0}};
+ reg [ 2:0] request_byte_counter = 3'b0;
+ reg [ 2:0] response_byte_counter = 3'b0;
+ reg transfer_complete = 1'b0;
+ reg write_transfer = 1'b0;
// input registers to relax input timing
reg [7:0] bytestream_data_in_reg = 8'b0;
reg bytestream_valid_in_reg = 1'b0;
reg bytestream_direction_reg = 1'b0;
+
always @ (posedge ctrlport_clk) begin
bytestream_data_in_reg <= bytestream_data_in;
bytestream_valid_in_reg <= bytestream_valid_in;
@@ -79,22 +87,19 @@ module ctrlport_byte_deserializer (
always @ (posedge ctrlport_clk) begin
if (ctrlport_rst) begin
state <= INIT_RX;
- byte_counter <= 3'b0;
+ request_byte_counter <= 3'b0;
transfer_complete <= 1'b0;
- bytestream_output_enable <= 1'b0;
+ response_byte_counter <= 3'b0;
end else begin
// default assignments
transfer_complete <= 1'b0;
- // direction defined by master
- bytestream_output_enable <= bytestream_direction;
- bytestream_valid_out <= 1'b0;
case (state)
// additional cycle for switching to make sure valid signal is driven
// from master when being in RECEIVE state
INIT_RX: begin
- byte_counter <= 3'b0;
+ request_byte_counter <= 3'b0;
if (bytestream_direction_reg == 0) begin
state <= RECEIVE;
end
@@ -103,17 +108,17 @@ module ctrlport_byte_deserializer (
// wait for reception of request from master
RECEIVE: begin
if (bytestream_valid_in_reg) begin
- byte_counter <= byte_counter + 1'b1;
+ request_byte_counter <= request_byte_counter + 1'b1;
request_cache <= {request_cache[NUM_BYTES_RX_WRITE*8-9:0], bytestream_data_in_reg};
// capture write or read
- if (byte_counter == 0) begin
+ if (request_byte_counter == 0) begin
write_transfer <= bytestream_data_in_reg[7];
end
// wait until request completes
- if ((write_transfer && byte_counter == NUM_BYTES_RX_WRITE-1) ||
- (~write_transfer && byte_counter == NUM_BYTES_RX_READ-1)) begin
+ if ((write_transfer && request_byte_counter == NUM_BYTES_RX_WRITE-1) ||
+ (~write_transfer && request_byte_counter == NUM_BYTES_RX_READ-1)) begin
transfer_complete <= 1'b1;
state <= WAIT_RESPONSE;
end
@@ -127,15 +132,10 @@ module ctrlport_byte_deserializer (
end
WAIT_RESPONSE: begin
- byte_counter <= 3'b0;
+ request_byte_counter <= 3'b0;
+ response_byte_counter <= 3'b0;
if (m_ctrlport_resp_ack) begin
state <= SENDING;
-
- if (write_transfer) begin
- response_cache <= {5'b0, 1'b1, m_ctrlport_resp_status, 32'b0};
- end else begin
- response_cache <= {m_ctrlport_resp_data, 5'b0, 1'b1, m_ctrlport_resp_status};
- end
end
//abort by host
@@ -145,14 +145,11 @@ module ctrlport_byte_deserializer (
end
SENDING: begin
- bytestream_valid_out <= 1'b1;
- bytestream_data_out <= response_cache[NUM_BYTES_TX_READ*8-8+:8];
- response_cache <= {response_cache[NUM_BYTES_TX_READ*8-9:0], 8'b0};
- byte_counter <= byte_counter + 1'b1;
+ response_byte_counter <= response_byte_counter + 1'b1;
// wait until request completes
- if ((write_transfer && byte_counter == NUM_BYTES_TX_WRITE-1) ||
- (~write_transfer && byte_counter == NUM_BYTES_TX_READ-1)) begin
+ if ((write_transfer && response_byte_counter == NUM_BYTES_TX_WRITE-1) ||
+ (~write_transfer && response_byte_counter == NUM_BYTES_TX_READ-1)) begin
state <= INIT_RX;
end
@@ -169,6 +166,42 @@ module ctrlport_byte_deserializer (
end
end
+ // Output data control
+ always @ (posedge ctrlport_clk_adjusted) begin
+ if (ctrlport_rst) begin
+ bytestream_valid_out <= 1'b0;
+ bytestream_output_enable <= 1'b0;
+ end else begin
+
+ bytestream_valid_out <= 1'b0;
+ // direction defined by master
+ bytestream_output_enable <= bytestream_direction;
+
+ case (state)
+ WAIT_RESPONSE: begin
+
+ if (write_transfer) begin
+ response_cache <= {5'b0, 1'b1, m_ctrlport_resp_status, 32'b0};
+ end else begin
+ response_cache <= {m_ctrlport_resp_data, 5'b0, 1'b1, m_ctrlport_resp_status};
+ end
+ end
+
+ SENDING: begin
+
+ bytestream_valid_out <= 1'b1;
+ bytestream_data_out <= response_cache[NUM_BYTES_TX_READ*8-8+:8];
+ response_cache <= {response_cache[NUM_BYTES_TX_READ*8-9:0], 8'b0};
+
+ end
+
+ default: begin
+ // NOP
+ end
+ endcase
+ end
+ end
+
//----------------------------------------------------------
// assign request to ctrlport
//----------------------------------------------------------
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/.gitignore b/fpga/usrp3/top/x400/dboards/zbx/cpld/.gitignore
index 9fd51d1a5..ce2981889 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/.gitignore
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/.gitignore
@@ -5,3 +5,11 @@ doc/*.xml
incremental_db/
output_files/
*.sopcinfo
+# Ignore Diamond generated files.
+lattice/impl1/
+lattice/zbx_*.dir/
+lattice/*_log.txt
+lattice/*.xml
+lattice/*.html
+lattice/*.ini
+lattice/*.recovery
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile b/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile
index 2ab32fb11..5b13bdce3 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile
@@ -12,16 +12,20 @@
## make <Targets> <Options>
##
##Output:
-## build/<device-id>/usrp_zbx_cpld.pof: Bitstream to use with JTAG programmer
-## build/<device-id>/usrp_zbx_cpld.svf: Bitstream to use with PS JTAG engine (background programming)
-## build/<device-id>/usrp_zbx_cpld.rpd: Bitstream to use via reconfig engine
-## build/<device-id>/usrp_zbx_cpld_isp_off.svf: Bitstream to use with JTAG test points (initial programming)
+## build/<device-id>/usrp_zbx_cpld_10m04.pof: Bitstream to use with JTAG programmer
+## build/<device-id>/usrp_zbx_cpld_10m04.svf: Bitstream to use with PS JTAG engine (background programming)
+## build/<device-id>/usrp_zbx_cpld_10m04.rpd: Bitstream to use via reconfig engine
+## build/<device-id>/usrp_zbx_cpld_10m04_isp_off.svf: Bitstream to use with JTAG test points (initial programming)
+## build/<device-id>/usrp_zbx_cpld_xo3lf.jed: Bitstream to use with JTAG programmer
+## build/<device-id>/usrp_zbx_cpld_xo3lf.svf: Bitstream to use with PS JTAG engine (background programming)
# Definitions
10M04_ID = "10M04SAU324I7G"
+XO3LF_ID = "LCMXO3LF-9400C"
# Target specific variables
ZBX_CPLD_10M04: DEFS = VARIANT_`echo $(10M04_ID) | cut -c1-5`=1
+ZBX_CPLD_XO3LF: IMPL = "impl1"
# Using one of the files as a dependency (all files are generated at the same time)
INIT_FILES := register_endpoints/memory_init_files/rx0_path_defaults.hex
@@ -40,35 +44,56 @@ quartus_build = make -f Makefile.zbx_cpld.inc $(TARGET) NAME=$@ ARCH="MAX10" PAR
# quartus_ip($1=Device, $2=Definitions)
quartus_ip = make -f Makefile.zbx_cpld.inc quar_ip NAME=$@ ARCH="MAX10" PART_ID="$1" $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2"
-# post_build($1=Artifact Name)
+# post_quar_build($1=Artifact Name)
ifeq ($(TARGET),bin)
- post_build = @\
+ post_quar_build = @\
mkdir -p build/; \
echo "Exporting bitstream files..."; \
- cp build-$@/output_files/$(TOP).pof build/$(1).pof; \
- cp build-$@/output_files/$(TOP)_isp_off.svf build/$(1)_isp_off.svf; \
- cp build-$@/output_files/$(TOP)_isp_on.svf build/$(1).svf; \
- cp build-$@/output_files/$(TOP)_converted_cfm0_auto.rpd build/$(1).rpd; \
+ cp build-$@/output_files/$(TOP).pof build/$(1)_10m04.pof; \
+ cp build-$@/output_files/$(TOP)_isp_off.svf build/$(1)_10m04_isp_off.svf; \
+ cp build-$@/output_files/$(TOP)_isp_on.svf build/$(1)_10m04.svf; \
+ cp build-$@/output_files/$(TOP)_converted_cfm0_auto.rpd build/$(1)_10m04.rpd; \
echo -ne "\n\n---- Make: MB CPLD ready!\n"; \
echo -ne " Use build/$(1).pof via JTAG programmer or\n"; \
echo -ne " build/$(1).svf (ISP on) via PS JTAG-engine (background programming) or\n"; \
echo -ne " build/$(1).rpd via reconfig engine or\n"; \
echo -ne " build/$(1)_isp_off.svf via JTAG test points (initial programming)\n";
else
- post_build = @echo "Skipping bitfile export."
+ post_quar_build = @echo "Skipping bitfile export."
+endif
+
+# diamond_build($1=Device, $2=Implementation)
+diamond_build = make -f Makefile.zbx_cpld.inc dmd_build NAME=$@ PART_ID="$1" IMPL=$2 TOP_MODULE=$(TOP)
+
+# post_dmd_build($1=Artifact Name, $2=Implementation Name)
+ifeq ($(TARGET),bin)
+ post_dmd_build = @\
+ mkdir -p build/; \
+ echo "Exporting bitstream files..."; \
+ cp build-$@/$(2)/$(TOP)_$(2).svf build/$(1)_xo3lf.svf; \
+ echo -ne "\n\n---- Make: MB CPLD ready!\n"; \
+ echo -ne " Use build/$(1)_xo3lf.svf via PS JTAG-engine \n";
+else
+ post_dmd_build = @echo "Skipping bitfile export."
endif
##
##Supported Targets
##-----------------
-all: ZBX_CPLD_10M04 ##(Default target)
+all: ZBX_CPLD_10M04 ZBX_CPLD_XO3LF ##(Build all targets by default)
##ZBX_CPLD_10M04: ZBX CPLD targeted to 10M04SAU169I7G.
ZBX_CPLD_10M04: $(INIT_FILES)
$(call pre_build)
$(call quartus_build,$(10M04_ID),$(DEFS))
- $(call post_build,"usrp_zbx_cpld")
+ $(call post_quar_build,"usrp_zbx_cpld")
+
+##ZBX_CPLD_XO3LF: ZBX CPLD targeted to LCMXO3LF-9400C.
+ZBX_CPLD_XO3LF: $(INIT_FILES)
+ $(call pre_build)
+ $(call diamond_build,$(XO3LF_ID),$(IMPL))
+ $(call post_dmd_build,"usrp_zbx_cpld",$(IMPL))
ZBX_CPLD_IP: ##Build IPs only, needed for simulation.
@# Building only ZBX_CPLD_10M04 IP
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile.zbx_cpld.inc b/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile.zbx_cpld.inc
index 7b47f61cd..6a5f1cb95 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile.zbx_cpld.inc
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/Makefile.zbx_cpld.inc
@@ -20,6 +20,7 @@ PROJECT_DIR = $(abspath .)
BASE_DIR = $(abspath ../../../../)
IP_DIR = $(abspath ./ip)
include $(BASE_DIR)/../tools/make/quartus_design_builder.mak
+include $(BASE_DIR)/../tools/make/diamond_design_builder.mak
# Include IP directory
include $(IP_DIR)/Makefile.inc
@@ -66,3 +67,7 @@ bin: .prereqs
quar_ip: .prereqs ip
@echo "IP Build DONE ..."
+
+dmd_build : .diamond_prereqs
+ $(call BUILD_DIAMOND_DESIGN,$(TOP_MODULE),$(PART_ID),$(PROJECT_DIR),$(BUILD_DIR),$(IMPL))
+
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_left.htm b/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_left.htm
index be5ae68a8..565188740 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_left.htm
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_left.htm
@@ -175,7 +175,8 @@
<p><span class="register" id="a_BASIC_REGS_REGMAP|SLAVE_REVISION" onclick="a('BASIC_REGS_REGMAP|SLAVE_REVISION');">SLAVE_REVISION</span></p>
<p><span class="register" id="a_BASIC_REGS_REGMAP|SLAVE_OLDEST_REVISION" onclick="a('BASIC_REGS_REGMAP|SLAVE_OLDEST_REVISION');">SLAVE_OLDEST_REVISION</span></p>
<p><span class="register" id="a_BASIC_REGS_REGMAP|SLAVE_SCRATCH" onclick="a('BASIC_REGS_REGMAP|SLAVE_SCRATCH');">SLAVE_SCRATCH</span></p>
- <p><span class="register" id="a_BASIC_REGS_REGMAP|GIT_HASH_REGISTER" onclick="a('BASIC_REGS_REGMAP|GIT_HASH_REGISTER');">GIT_HASH_REGISTER</span></p>
+ <p><span class="register" id="a_BASIC_REGS_REGMAP|GIT_HASH_REGISTER" onclick="a('BASIC_REGS_REGMAP|GIT_HASH_REGISTER');">GIT_HASH_REGISTER</span></p>
+ <p><span class="register" id="a_BASIC_REGS_REGMAP|SLAVE_VARIANT" onclick="a('BASIC_REGS_REGMAP|SLAVE_VARIANT');">SLAVE_VARIANT</span></p>
</div>
</div>
<p>
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_right.htm b/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_right.htm
index fe82ee614..1310b5720 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_right.htm
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/doc/ZBX_CPLD_right.htm
@@ -1473,6 +1473,32 @@ This enum is used to create the constants held in the basic registers in both ve
<tr valign="top">
+ <td class='value'>5063000</td>
+
+ <td class='l'>0x004D4158</td>
+
+ <td class="l" style="text-align: left;">
+ <p class="name"><a name='BASIC_REGS_REGMAP|BASIC_REGISTERS_VALUES|VARIANT_ID_MAX10'></a>VARIANT_ID_MAX10</p>
+
+</td>
+
+</tr>
+
+<tr valign="top">
+
+ <td class='value'>5787443</td>
+
+ <td class='l'>0x00584F33</td>
+
+ <td class="l" style="text-align: left;">
+ <p class="name"><a name='BASIC_REGS_REGMAP|BASIC_REGISTERS_VALUES|VARIANT_ID_XO3'></a>VARIANT_ID_XO3</p>
+
+</td>
+
+</tr>
+
+<tr valign="top">
+
<td class='value'>537986577</td>
<td class='l'>0x20110611</td>
@@ -1486,9 +1512,9 @@ This enum is used to create the constants held in the basic registers in both ve
<tr valign="top">
- <td class='value'>554767892</td>
+ <td class='value'>570627601</td>
- <td class='l'>0x21111614</td>
+ <td class='l'>0x22031611</td>
<td class="l" style="text-align: left;">
<p class="name"><a name='BASIC_REGS_REGMAP|BASIC_REGISTERS_VALUES|CPLD_REVISION'></a>CPLD_REVISION</p>
@@ -2145,6 +2171,130 @@ Git hash of commit used to build this image.<br>
</div>
+ <div class="register">
+ <a name="BASIC_REGS_REGMAP|SLAVE_VARIANT"></a>
+
+<h3 class="register">Offset 0x0014: SLAVE_VARIANT Register (R)</h3>
+
+ <a class="sh_addrs" href="javascript:sa('BASIC_REGS_REGMAP|SLAVE_VARIANT_in')">(<span id="show_BASIC_REGS_REGMAP|SLAVE_VARIANT_in">show</span> extended info)</a>
+ <div class="sh_addrs" id="div_BASIC_REGS_REGMAP|SLAVE_VARIANT_in">
+
+ <table class="extended_info">
+
+<tr>
+
+<td class="outercell" rowspan="1">
+
+ <table border="0" cellspacing="0" cellpadding="0">
+ <tr><td class="offset_info" align="right">Port <a href="#ZBX_CPLD|GPIO">GPIO</a></td></tr>
+ </table>
+
+</td>
+
+<td class="outercell" rowspan="1">
+
+<table border="0" cellspacing="0" cellpadding="0">
+ <tr><td class="offset_info" align="right"><a href="#GPIO_REGMAP|BASE_WINDOW_GPIO">GPIO_REGMAP|BASE_WINDOW_GPIO</a></td></tr>
+ <tr><td class="offset_info" align="right">&nbsp;&nbsp;0x000000</td></tr>
+</table>
+
+</td>
+
+<td class="outercell" rowspan="2">
+
+<table border="0" cellspacing="0" cellpadding="0">
+ <tr><td class="offset_info" align="right">SLAVE_VARIANT</td></tr>
+ <tr><td class="offset_info" align="right">&nbsp;&nbsp;offset=0x0014</td></tr>
+</table>
+
+</td>
+
+<td class="outercell" rowspan="1">
+
+<table border="0" cellspacing="0" cellpadding="0">
+
+<tr><td class="offset_info">
+
+
+Total Offset =</td></tr>
+<tr><td class="offset_info">&nbsp;&nbsp;0x000014
+
+</td></tr>
+</table>
+
+</td>
+
+</tr>
+
+<tr>
+
+<td class="outercell" rowspan="1">
+
+ <table border="0" cellspacing="0" cellpadding="0">
+ <tr><td class="offset_info" align="right">Port <a href="#ZBX_CPLD|SPI">SPI</a></td></tr>
+ </table>
+
+</td>
+
+<td class="outercell" rowspan="1">
+
+<table border="0" cellspacing="0" cellpadding="0">
+ <tr><td class="offset_info" align="right"><a href="#SPI_REGMAP|BASE_WINDOW_SPI">SPI_REGMAP|BASE_WINDOW_SPI</a></td></tr>
+ <tr><td class="offset_info" align="right">&nbsp;&nbsp;0x000000</td></tr>
+</table>
+
+</td>
+
+<td class="outercell" rowspan="1">
+
+<table border="0" cellspacing="0" cellpadding="0">
+
+<tr><td class="offset_info">
+
+
+Total Offset =</td></tr>
+<tr><td class="offset_info">&nbsp;&nbsp;0x000014
+
+</td></tr>
+</table>
+
+</td>
+
+</tr>
+
+</table><p/>
+
+<p class="reg_info">Initial Value = 0x00000000
+</p>
+
+<p class="reg_info">This register is defined in HDL source file basic_regs.v.</p>
+
+</div>
+
+<div class="info">
+
+Contains information pertaining the variant of the programmable.
+
+</div>
+
+ <table class="bitfields" border="0" cellspacing="0" cellpadding="0">
+ <tr class="header"><td class="bits">Bits</td><td>Name</td></tr>
+
+ <tr valign="top">
+ <td class="bits">31..0</td>
+ <td>
+ <p><span class="name"><a name="BASIC_REGS_REGMAP|SLAVE_VARIANT|VARIANT_REG"></a>VARIANT_REG</span><span class="attr"> &nbsp;&nbsp;(initialvalue=0)</span></p>
+ <p>Returns the variant of the programmable based on the part vendor.
+ MAX10 variants return 0x583033(ASCII for MAX), while the XO3 variant
+ returns 0x584F33(ASCII for XO3)</p>
+
+ </td>
+ </tr>
+
+</table>
+
+</div>
+
</div>
</div>
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/build.tcl b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/build.tcl
new file mode 100644
index 000000000..b4b4d25d8
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/build.tcl
@@ -0,0 +1,22 @@
+#
+# Copyright 2022 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+#
+# This file contains the sequence of steps required to
+# build and generate outputs for the ZBX CPLD, XO3 variant.
+# It is intended to be use as a parameter for
+# pnmainc (Diamond TCL console).
+# pnmainc.exe build.tcl > <LOG_FILE_NAME>
+
+prj_project open "zbx_top_cpld.ldf"
+prj_run Synthesis -impl impl1
+prj_run Translate -impl impl1
+prj_run Map -impl impl1
+prj_run PAR -impl impl1
+prj_run PAR -impl impl1 -task PARTrace
+prj_run Export -impl impl1 -task Bitgen
+prj_run Export -impl impl1 -task Jedecgen
+prj_run Export -impl impl1 -task Jedec4Xo3l
+prj_project close
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.ipx b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.ipx
new file mode 100644
index 000000000..e1a58563e
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.ipx
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<DiamondModule name="pll" module="pll" VendorName="Lattice Semiconductor Corporation" generator="IPexpress" date="2022 03 03 14:15:50.923" version="5.8" type="Module" synthesis="synplify" source_format="Verilog HDL">
+ <Package>
+ <File name="pll.lpc" type="lpc" modified="2022 03 03 14:15:48.492"/>
+ <File name="pll.v" type="top_level_verilog" modified="2022 03 03 14:15:48.597"/>
+ <File name="pll_tmpl.v" type="template_verilog" modified="2022 03 03 14:15:48.597"/>
+ </Package>
+</DiamondModule>
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.lpc b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.lpc
new file mode 100644
index 000000000..34390f519
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.lpc
@@ -0,0 +1,87 @@
+[Device]
+Family=machxo3lf
+PartType=LCMXO3LF-9400C
+PartName=LCMXO3LF-9400C-6BG256I
+SpeedGrade=6
+Package=CABGA256
+OperatingCondition=IND
+Status=S
+
+[IP]
+VendorName=Lattice Semiconductor Corporation
+CoreType=LPM
+CoreStatus=Demo
+CoreName=PLL
+CoreRevision=5.8
+ModuleName=pll
+SourceFormat=Verilog HDL
+ParameterFileVersion=1.0
+Date=03/03/2022
+Time=14:15:48
+
+[Parameters]
+Verilog=1
+VHDL=0
+EDIF=1
+Destination=Synplicity
+Expression=None
+Order=None
+IO=0
+mode=Frequency
+CLKI=64
+CLKI_DIV=1
+BW=6.139
+VCO=512.000
+fb_mode=CLKOP
+CLKFB_DIV=1
+FRACN_ENABLE=0
+FRACN_DIV=0
+DynamicPhase=STATIC
+ClkEnable=1
+Standby=0
+Enable_sel=0
+PLLRst=0
+PLLMRst=0
+ClkOS2Rst=0
+ClkOS3Rst=0
+LockSig=1
+LockStk=0
+WBProt=0
+OPBypass=0
+OPUseDiv=0
+CLKOP_DIV=8
+FREQ_PIN_CLKOP=64
+OP_Tol=0.0
+CLKOP_AFREQ=64.000000
+CLKOP_PHASEADJ=0
+CLKOP_TRIM_POL=Rising
+CLKOP_TRIM_DELAY=0
+EnCLKOS=1
+OSBypass=0
+OSUseDiv=0
+CLKOS_DIV=8
+FREQ_PIN_CLKOS=64
+OS_Tol=0.0
+CLKOS_AFREQ=64.000000
+CLKOS_PHASEADJ=225
+CLKOS_TRIM_POL=Rising
+CLKOS_TRIM_DELAY=0
+EnCLKOS2=0
+OS2Bypass=0
+OS2UseDiv=0
+CLKOS2_DIV=1
+FREQ_PIN_CLKOS2=64
+OS2_Tol=0.0
+CLKOS2_AFREQ=64.000000
+CLKOS2_PHASEADJ=225
+EnCLKOS3=0
+OS3Bypass=0
+OS3UseDiv=0
+CLKOS3_DIV=1
+FREQ_PIN_CLKOS3=100
+OS3_Tol=0.0
+CLKOS3_AFREQ=
+CLKOS3_PHASEADJ=0
+
+[Command]
+cmd_line= -w -n pll -lang verilog -synth synplify -arch xo3c00f -type pll -fin 64 -fclkop 64 -fclkop_tol 0.0 -fclkos 64 -fclkos_tol 0.0 -trimp 0 -phasep 0 -trimp_r -trims 0 -phases 225 -trims_r -phase_cntl STATIC -enable_ports -fb_mode 1 -lock
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.v
new file mode 100644
index 000000000..24f3fab22
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll.v
@@ -0,0 +1,100 @@
+/* Verilog netlist generated by SCUBA Diamond (64-bit) 3.12.0.240.2 */
+/* Module Version: 5.7 */
+/* C:\lscc\diamond\3.12\ispfpga\bin\nt64\scuba.exe -w -n pll -lang verilog -synth synplify -arch xo3c00f -type pll -fin 64 -fclkop 64 -fclkop_tol 0.0 -fclkos 64 -fclkos_tol 0.0 -trimp 0 -phasep 0 -trimp_r -trims 0 -phases 225 -trims_r -phase_cntl STATIC -enable_ports -fb_mode 1 -lock */
+/* Thu Mar 03 14:15:48 2022 */
+
+
+`timescale 1 ns / 1 ps
+module pll (CLKI, ENCLKOP, ENCLKOS, CLKOP, CLKOS, LOCK)/* synthesis NGD_DRC_MASK=1 */;
+ input wire CLKI;
+ input wire ENCLKOP;
+ input wire ENCLKOS;
+ output wire CLKOP;
+ output wire CLKOS;
+ output wire LOCK;
+
+ wire CLKOS_t;
+ wire CLKOP_t;
+ wire scuba_vlo;
+
+ VLO scuba_vlo_inst (.Z(scuba_vlo));
+
+ defparam PLLInst_0.DDRST_ENA = "DISABLED" ;
+ defparam PLLInst_0.DCRST_ENA = "DISABLED" ;
+ defparam PLLInst_0.MRST_ENA = "DISABLED" ;
+ defparam PLLInst_0.PLLRST_ENA = "DISABLED" ;
+ defparam PLLInst_0.INTFB_WAKE = "DISABLED" ;
+ defparam PLLInst_0.STDBY_ENABLE = "DISABLED" ;
+ defparam PLLInst_0.DPHASE_SOURCE = "DISABLED" ;
+ defparam PLLInst_0.PLL_USE_WB = "DISABLED" ;
+ defparam PLLInst_0.CLKOS3_FPHASE = 0 ;
+ defparam PLLInst_0.CLKOS3_CPHASE = 0 ;
+ defparam PLLInst_0.CLKOS2_FPHASE = 0 ;
+ defparam PLLInst_0.CLKOS2_CPHASE = 0 ;
+ defparam PLLInst_0.CLKOS_FPHASE = 0 ;
+ defparam PLLInst_0.CLKOS_CPHASE = 12 ;
+ defparam PLLInst_0.CLKOP_FPHASE = 0 ;
+ defparam PLLInst_0.CLKOP_CPHASE = 7 ;
+ defparam PLLInst_0.PLL_LOCK_MODE = 0 ;
+ defparam PLLInst_0.CLKOS_TRIM_DELAY = 0 ;
+ defparam PLLInst_0.CLKOS_TRIM_POL = "RISING" ;
+ defparam PLLInst_0.CLKOP_TRIM_DELAY = 0 ;
+ defparam PLLInst_0.CLKOP_TRIM_POL = "RISING" ;
+ defparam PLLInst_0.FRACN_DIV = 0 ;
+ defparam PLLInst_0.FRACN_ENABLE = "DISABLED" ;
+ defparam PLLInst_0.OUTDIVIDER_MUXD2 = "DIVD" ;
+ defparam PLLInst_0.PREDIVIDER_MUXD1 = 0 ;
+ defparam PLLInst_0.VCO_BYPASS_D0 = "DISABLED" ;
+ defparam PLLInst_0.CLKOS3_ENABLE = "DISABLED" ;
+ defparam PLLInst_0.OUTDIVIDER_MUXC2 = "DIVC" ;
+ defparam PLLInst_0.PREDIVIDER_MUXC1 = 0 ;
+ defparam PLLInst_0.VCO_BYPASS_C0 = "DISABLED" ;
+ defparam PLLInst_0.CLKOS2_ENABLE = "DISABLED" ;
+ defparam PLLInst_0.OUTDIVIDER_MUXB2 = "DIVB" ;
+ defparam PLLInst_0.PREDIVIDER_MUXB1 = 0 ;
+ defparam PLLInst_0.VCO_BYPASS_B0 = "DISABLED" ;
+ defparam PLLInst_0.CLKOS_ENABLE = "DISABLED" ;
+ defparam PLLInst_0.OUTDIVIDER_MUXA2 = "DIVA" ;
+ defparam PLLInst_0.PREDIVIDER_MUXA1 = 0 ;
+ defparam PLLInst_0.VCO_BYPASS_A0 = "DISABLED" ;
+ defparam PLLInst_0.CLKOP_ENABLE = "DISABLED" ;
+ defparam PLLInst_0.CLKOS3_DIV = 1 ;
+ defparam PLLInst_0.CLKOS2_DIV = 1 ;
+ defparam PLLInst_0.CLKOS_DIV = 8 ;
+ defparam PLLInst_0.CLKOP_DIV = 8 ;
+ defparam PLLInst_0.CLKFB_DIV = 1 ;
+ defparam PLLInst_0.CLKI_DIV = 1 ;
+ defparam PLLInst_0.FEEDBK_PATH = "CLKOP" ;
+ EHXPLLJ PLLInst_0 (.CLKI(CLKI), .CLKFB(CLKOP_t), .PHASESEL1(scuba_vlo),
+ .PHASESEL0(scuba_vlo), .PHASEDIR(scuba_vlo), .PHASESTEP(scuba_vlo),
+ .LOADREG(scuba_vlo), .STDBY(scuba_vlo), .PLLWAKESYNC(scuba_vlo),
+ .RST(scuba_vlo), .RESETM(scuba_vlo), .RESETC(scuba_vlo), .RESETD(scuba_vlo),
+ .ENCLKOP(ENCLKOP), .ENCLKOS(ENCLKOS), .ENCLKOS2(scuba_vlo), .ENCLKOS3(scuba_vlo),
+ .PLLCLK(scuba_vlo), .PLLRST(scuba_vlo), .PLLSTB(scuba_vlo), .PLLWE(scuba_vlo),
+ .PLLADDR4(scuba_vlo), .PLLADDR3(scuba_vlo), .PLLADDR2(scuba_vlo),
+ .PLLADDR1(scuba_vlo), .PLLADDR0(scuba_vlo), .PLLDATI7(scuba_vlo),
+ .PLLDATI6(scuba_vlo), .PLLDATI5(scuba_vlo), .PLLDATI4(scuba_vlo),
+ .PLLDATI3(scuba_vlo), .PLLDATI2(scuba_vlo), .PLLDATI1(scuba_vlo),
+ .PLLDATI0(scuba_vlo), .CLKOP(CLKOP_t), .CLKOS(CLKOS_t), .CLKOS2(),
+ .CLKOS3(), .LOCK(LOCK), .INTLOCK(), .REFCLK(), .CLKINTFB(), .DPHSRC(),
+ .PLLACK(), .PLLDATO7(), .PLLDATO6(), .PLLDATO5(), .PLLDATO4(), .PLLDATO3(),
+ .PLLDATO2(), .PLLDATO1(), .PLLDATO0())
+ /* synthesis FREQUENCY_PIN_CLKOS="64.000000" */
+ /* synthesis FREQUENCY_PIN_CLKOP="64.000000" */
+ /* synthesis FREQUENCY_PIN_CLKI="64.000000" */
+ /* synthesis ICP_CURRENT="9" */
+ /* synthesis LPF_RESISTOR="72" */;
+
+ assign CLKOS = CLKOS_t;
+ assign CLKOP = CLKOP_t;
+
+
+ // exemplar begin
+ // exemplar attribute PLLInst_0 FREQUENCY_PIN_CLKOS 64.000000
+ // exemplar attribute PLLInst_0 FREQUENCY_PIN_CLKOP 64.000000
+ // exemplar attribute PLLInst_0 FREQUENCY_PIN_CLKI 64.000000
+ // exemplar attribute PLLInst_0 ICP_CURRENT 9
+ // exemplar attribute PLLInst_0 LPF_RESISTOR 72
+ // exemplar end
+
+endmodule
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll_tmpl.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll_tmpl.v
new file mode 100644
index 000000000..6828b621b
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/ip/pll/pll_tmpl.v
@@ -0,0 +1,7 @@
+/* Verilog module instantiation template generated by SCUBA Diamond (64-bit) 3.12.0.240.2 */
+/* Module Version: 5.7 */
+/* Thu Mar 03 14:15:48 2022 */
+
+/* parameterized module instance */
+pll __ (.CLKI( ), .ENCLKOP( ), .ENCLKOS( ), .CLKOP( ), .CLKOS( ),
+ .LOCK( ));
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.ldf b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.ldf
new file mode 100644
index 000000000..d1848e71e
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.ldf
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<BaliProject version="3.2" title="zbx_top_cpld" device="LCMXO3LF-9400C-6BG256I" default_implementation="impl1">
+ <Options/>
+ <Implementation title="impl1" dir="impl1" description="impl1" synthesis="synplify" default_strategy="zbx_cpld_strat">
+ <Options VERILOG_DIRECTIVES="VARIANT_XO3" def_top="zbx_top_cpld" top="zbx_top_cpld"/>
+ <Source name="../zbx_cpld_core.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../zbx_top_cpld.v" type="Verilog" type_short="Verilog">
+ <Options top_module="zbx_top_cpld"/>
+ </Source>
+ <Source name="../../../../../../lib/control/handshake.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/control/pulse_synchronizer.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/control/ram_2port.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/control/reset_sync.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/control/synchronizer.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/control/synchronizer_impl.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../cpld/reconfig_engine.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../ctrlport_byte_deserializer.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/rfnoc/utils/ctrlport_splitter.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/wb_spi/rtl/verilog/spi_clgen.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/wb_spi/rtl/verilog/spi_shift.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/wb_spi/rtl/verilog/spi_top.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../cpld/spi_slave.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../cpld/spi_slave_to_ctrlport_master.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/rfnoc/utils/ctrlport_window.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/atr_controller.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/basic_regs.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/dsa_control.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/led_control.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/lo_control.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/power_regs.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../register_endpoints/switch_control.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/rfnoc/utils/ctrlport_clk_cross.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="../../../../../../lib/rfnoc/utils/ctrlport_combiner.v" type="Verilog" type_short="Verilog">
+ <Options/>
+ </Source>
+ <Source name="ip/pll/pll.ipx" type="IPX_Module" type_short="IPX">
+ <Options/>
+ </Source>
+ <Source name="zbx_top_cpld.lpf" type="Logic Preference" type_short="LPF">
+ <Options/>
+ </Source>
+ <Source name="../zbx_top_cpld_gpio.ldc" type="LSE Design Constraints File" type_short="LDC" excluded="TRUE">
+ <Options/>
+ </Source>
+ </Implementation>
+ <Strategy name="zbx_cpld_strat" file="zbx_top_cpld.sty"/>
+</BaliProject>
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.lpf b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.lpf
new file mode 100644
index 000000000..e41c58541
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.lpf
@@ -0,0 +1,803 @@
+#
+# Copyright 2022 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# This file follows the Lattice Preference File style to describe
+# timing constraints for a Lattice Diamond Synplify build flow.
+#
+##### GENERAL TIMING DISCLAIMER ########
+
+# Multiple constraints within this file use constant numbers to describe their
+# respective input and output delays. The values presented were generated by
+# evaluating constraints described for the MAX10 variant of this CPLD.
+# Additional considerations were used when a constraint could not be written
+# in the same way for both variants(such as in additional delays present in
+# the datapath or data being generated on falling edges). In such cases,
+# additional comments describing the origin of the value used are provided.
+# The original constraints used to compute the values used in this file are
+# located at:
+# ../quartus/zbx_top_cpld.qsf
+
+######################################################################################
+# Timing
+######################################################################################
+# base clocks
+@define $prc_clock_period 15.625 ;
+@define $ctrl_sclk_period $prc_clock_period * 3.0 ;
+
+PERIOD PORT "CPLD_REFCLK" $prc_clock_period ;
+PERIOD PORT "MB_CTRL_SCK" $ctrl_sclk_period ;
+FREQUENCY NET "clk_int_osc" 66.500000 MHz ;
+
+############# MB GPIO ##################
+
+# OUTPUT PATH
+# --------------------------------------------------------------------------------------
+# P&R fails when using delay values from original design. To make it easier for
+# timing to be met, this interface uses an adjusted version of the clock, shifted
+# by 225 degrees. Unfortunately, the use of a shifted clock result in the analysis
+# of this input path to be incorrect
+# The following diagram represents the timing for the GPIO communication interface
+# considering data generated on a shifted clock.
+#
+# *Launch Edge(according to Diamond)
+# |
+# | * Latch edge(according to Diamond)
+# | |
+# | | * Actual Latch Edge.
+# | | |
+# ref_clk __/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\
+# Max Output Delay _____________XXXXXXXX__________________________________________
+# Min Output Delay ________XXX____________________________________________________
+# shifted clk ----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\____
+# |
+# |
+# * Data gets generated by shifted clock
+# A potential solution for this would be to use multi-cycle path constraints to
+# shift the analysis to the actual latch edge. This is not supported in Diamond,
+# as output delay constraints are incompatible with multi-cycle constraints.
+#
+# After contacting Lattice, it was determined that the best solution was to compensate
+# the delay that would be inserted by a multi-cycle constraint in the output delay
+# constraint(effectively analyzing the timing from the detected to the actual
+# latch edge).
+# An advantage of this implementation is the ability to consider the worst-case clock
+# frequency for the different scenarios analyzed.
+
+# Maximum path delay = 8.5 ns
+# Minimum path delay = -2 ns
+# To shift timing analysis to the correct edges, the timing windows is shifted by
+# one clock cycle, which is performed by subtracting a prc_clock period from
+# the original path delays.
+@define $gpio_max_output_delay 8.5 - $prc_clock_period ;
+@define $gpio_min_output_delay -2.0 - $prc_clock_period ;
+
+# This analysis results in the following constraint.
+CLOCK_TO_OUT PORT "MB_FPGA_GPIO*" OUTPUT_DELAY $gpio_max_output_delay ns
+ MIN $gpio_min_output_delay ns
+ CLKPORT "CPLD_REFCLK" ;
+
+# INPUT PATH
+# --------------------------------------------------------------------------------------
+# This path uses prc_clk with no phase alterations.
+# The input path for GPIO lanes is driven in the falling edge of the clock, and some correction
+# is performed for this adjustment.
+#
+# *Launch Edge(according to Diamond)
+# |
+# | * Actual Launch Edge
+# | |
+# | | * Actual Latch Edge.
+# | | |
+# ref_clk __/-----------\___________/-----------\___________/-----------\___________/------
+# Max Delay ______________XXXXX______________________________________________________________
+# Min Delay ______________XXX________________________________________________________________
+
+
+# Maximum path delay = 4.561
+# Minimum path delay = 4.045
+# To adjust the analysis to the correct launch edge, we increase the input delays by
+# half a prc_clock period. The CLK_OFFSET option is not used as it only changes
+# the analysis on the receiving flop.
+@define $gpio_max_input_delay $prc_clock_period / 2.0 + 4.561 ;
+@define $gpio_min_input_delay $prc_clock_period / 2.0 + 4.045 ;
+# Invert value for hold constraint
+@define $gpio_min_input_hold -1.0 * $gpio_min_input_delay ;
+
+# The adjusted values are used in the input constraint.
+INPUT_SETUP PORT "MB_FPGA_GPIO*" INPUT_DELAY $gpio_max_input_delay ns
+ HOLD $gpio_min_input_hold ns
+ CLKPORT "CPLD_REFCLK" ;
+
+############# LO SYNC ##################
+INPUT_SETUP PORT MB_SYNTH_SYNC INPUT_DELAY 6.747 HOLD -5.860 ns CLKPORT "CPLD_REFCLK" ;
+
+DEFINE PORT GROUP "LO_SYNC"
+ "RX0_LO*_SYNC"
+ "RX1_LO*_SYNC"
+ "TX0_LO*_SYNC"
+ "TX1_LO*_SYNC" ;
+
+CLOCK_TO_OUT GROUP LO_SYNC OUTPUT_DELAY 2.445 MIN 2.145 ns CLKPORT "CPLD_REFCLK" ;
+
+#####################################################################
+# Timing exceptions
+#####################################################################
+## synchronizers
+BLOCK PATH FROM PORT "CTRL_REG_ARST" TO CELL "*synchronizer_false_path*value_0*" ;
+
+#####################################################################
+# Asynchronous IO
+#####################################################################
+# For general I/O that don't have tight timing constraints, we can constrain
+# these paths by creating a generic flip-flop that will interface to the
+# device.
+# For asynchronous outputs
+@define $generic_ext_flop_tsu 1 ;
+@define $generic_ext_flop_th 0 ;
+
+# # For asynchronous inputs
+@define $generic_ext_flop_max_tco 1 ;
+@define $generic_ext_flop_min_tco 1 ;
+
+# REF CLK
+#--------------------------------------------------------------------
+DEFINE PORT GROUP "ASYNC_REFCLK_OUTPUTS"
+ "CH*_*X*_LED"
+ "RX*_DSA*_*[*]"
+ "TX*_DSA*[*]"
+ "*X*_SW*" ;
+
+CLOCK_TO_OUT GROUP ASYNC_REFCLK_OUTPUTS OUTPUT_DELAY $generic_ext_flop_tsu ns
+ MIN $generic_ext_flop_th ns
+ CLKPORT "CPLD_REFCLK" ;
+
+
+DEFINE PORT GROUP "ASYNC_REFCLK_INPUTS"
+ "CTRL_REG_ARST" ;
+
+INPUT_SETUP GROUP ASYNC_REFCLK_INPUTS INPUT_DELAY $generic_ext_flop_max_tco ns
+ HOLD $generic_ext_flop_min_tco ns
+ CLKPORT "CPLD_REFCLK" ;
+
+# INT OSC
+#--------------------------------------------------------------------
+DEFINE PORT GROUP "ASYNC_INTOSC_OUTPUTS"
+ "P*_ENABLE*" ;
+
+CLOCK_TO_OUT GROUP ASYNC_INTOSC_OUTPUTS OUTPUT_DELAY $generic_ext_flop_tsu ns
+ MIN $generic_ext_flop_th ns
+ CLKNET "clk_int_osc" ;
+DEFINE PORT GROUP "ASYNC_INTOSC_INPUTS"
+ "P7V_PG_*" ;
+
+INPUT_SETUP GROUP ASYNC_INTOSC_INPUTS INPUT_DELAY $generic_ext_flop_max_tco ns
+ HOLD $generic_ext_flop_min_tco ns
+ CLKNET "clk_int_osc" ;
+
+
+#####################################################################
+# MB CPLD <-> DB CPLD CTRL SPI interface
+#####################################################################
+# The timing constants of the MB CPLD are defined in
+# fpga/usrp3/top/x400/cpld/db_spi_shared_constants.sdc
+
+@define $ctrl_spi_input_max_delay -2.014 ;
+@define $ctrl_spi_input_min_delay -4.500 ;
+
+DEFINE PORT GROUP "CTRL_SLAVE_INPUTS"
+ "MB_CTRL_MOSI"
+ "MB_CTRL_CS" ;
+
+INPUT_SETUP GROUP CTRL_SLAVE_INPUTS INPUT_DELAY $ctrl_spi_input_max_delay ns
+ HOLD $ctrl_spi_input_min_delay ns
+ CLKPORT "MB_CTRL_SCK"
+ SS ;
+
+@define $ctrl_spi_output_max_delay 17.254 ;
+@define $ctrl_spi_output_min_delay -0.500 ;
+
+DEFINE PORT GROUP "CTRL_SLAVE_OUTPUTS"
+ "MB_CTRL_MISO" ;
+
+CLOCK_TO_OUT GROUP CTRL_SLAVE_OUTPUTS OUTPUT_DELAY $ctrl_spi_output_max_delay ns
+ MIN $ctrl_spi_output_min_delay ns
+ CLKPORT "MB_CTRL_SCK" ;
+
+
+# Additionally, Lattice detects an unconstrained path from MB_CTRL_CS
+# to clk_int_osc. Since MB_CTRL_CS is asynchronous to that clock net,
+# we use the same constraint strategy as for other asynchronous
+# inputs.
+INPUT_SETUP PORT "MB_CTRL_CS" INPUT_DELAY $generic_ext_flop_max_tco ns
+ HOLD $generic_ext_flop_min_tco ns
+ CLKNET "clk_int_osc" ;
+
+#####################################################################
+# LO SPI interface
+#####################################################################
+
+PERIOD PORT "TX0_LO1_SCK" $prc_clock_period ;
+PERIOD PORT "RX0_LO1_SCK" $prc_clock_period ;
+PERIOD PORT "TX0_LO2_SCK" $prc_clock_period ;
+PERIOD PORT "RX0_LO2_SCK" $prc_clock_period ;
+PERIOD PORT "TX1_LO1_SCK" $prc_clock_period ;
+PERIOD PORT "RX1_LO1_SCK" $prc_clock_period ;
+PERIOD PORT "TX1_LO2_SCK" $prc_clock_period ;
+PERIOD PORT "RX1_LO2_SCK" $prc_clock_period ;
+
+DEFINE PORT GROUP "LO_SPI_CLKS"
+ "*X*_LO*_SCK" ;
+DEFINE PORT GROUP "LO_SPI_TX0_LO1_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "TX0_LO1_CSB" ;
+DEFINE PORT GROUP "LO_SPI_TX0_LO2_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "TX0_LO2_CSB" ;
+DEFINE PORT GROUP "LO_SPI_TX1_LO1_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "TX1_LO1_CSB" ;
+DEFINE PORT GROUP "LO_SPI_TX1_LO2_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "TX1_LO2_CSB" ;
+DEFINE PORT GROUP "LO_SPI_RX0_LO1_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "RX0_LO1_CSB" ;
+DEFINE PORT GROUP "LO_SPI_RX0_LO2_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "RX0_LO2_CSB" ;
+DEFINE PORT GROUP "LO_SPI_RX1_LO1_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "RX1_LO1_CSB" ;
+DEFINE PORT GROUP "LO_SPI_RX1_LO2_OUTPUT_PORTS"
+ "RX_TX_LO_SDI"
+ "RX1_LO2_CSB" ;
+DEFINE PORT GROUP "LO_SPI_INPUT_PORTS"
+ "*X*_LO*_MUXOUT" ;
+
+# -- Multi-cycle path for SPI CS and SDI --
+# ----------------------------------------
+# edge # 1 2 3 4 5
+# clk50 __/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/--
+# sclk __/-----------------------\_______________________/--------------
+# | launch edge (due to negedge reg)
+# | | |
+# 0 1 2 -- Edge used for setup analysis
+#
+# | | |
+# 3 2 1
+# | |
+# | \____ Edge used for hold
+# |
+# \____ Actual hold edge
+#
+
+
+# Maximum path delay = 13 ns
+
+# To shift timing analysis to the correct edges, the timing windows is shifted by
+# one clock cycle, which is performed by subtracting a prc_clock period from
+# the original path delays.
+@define $lo_spi_output_max_delay 13.0 - $prc_clock_period ;
+
+# Minimum path delay = -13 ns
+# This constraint can be left unmodified, this will result in a more conservative constraint
+# (using edge #2 instead of edge #1 for timing analysis). The main reason for this
+# over-constraining is that edge#1 requires making the minimum delay a positive number,
+# higher than the maximum delay. The current state of this constraint still
+# guarantees that data is held stable during the hold period.
+@define $lo_spi_output_min_delay -13.000 ;
+
+CLOCK_TO_OUT GROUP LO_SPI_TX0_LO1_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "TX0_LO1_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_TX0_LO2_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "TX0_LO2_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_TX1_LO1_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "TX1_LO1_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_TX1_LO2_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "TX1_LO2_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_RX0_LO1_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "RX0_LO1_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_RX0_LO2_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "RX0_LO2_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_RX1_LO1_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "RX1_LO1_SCK" ;
+
+CLOCK_TO_OUT GROUP LO_SPI_RX1_LO2_OUTPUT_PORTS OUTPUT_DELAY $lo_spi_output_max_delay ns
+ MIN $lo_spi_output_min_delay ns
+ CLKPORT "CPLD_REFCLK"
+ CLKOUT PORT "RX1_LO2_SCK" ;
+
+# -- Multi-cycle path for SPI MUXOUT --
+# ----------------------------------------
+# edge # 1 2 3 4 5 6 7 8
+# clk50 __/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/--
+# sclk __/-----------------------\_______________________/-----------------------\_______________________/--
+# muxout MSB | MSB-1
+# launch edge |
+# | | |
+# 0 1 2
+# \_ Edge used for setup analysis
+# | | |
+# 3 2 1
+# |
+# \____ Edge used for hold = 3
+#
+
+# Maximum path delay = 16 ns
+# Setup analysis can be shifted from edge #4 to edge #5 by
+# subtracting a clock period from the maximum delay.
+@define $lo_spi_input_max_delay 16.000 - $prc_clock_period ;
+
+# For hold analysis, we conservatively set the minimum delay of the
+# MUXOUT path to 0.
+@define $lo_spi_input_min_delay 0.000 ;
+
+INPUT_SETUP GROUP LO_SPI_INPUT_PORTS INPUT_DELAY $lo_spi_input_max_delay ns
+ HOLD $lo_spi_input_min_delay ns
+ CLKPORT "CPLD_REFCLK";
+
+# Add very loose timing requirements for clocks
+CLOCK_TO_OUT GROUP LO_SPI_CLKS OUTPUT_DELAY $generic_ext_flop_tsu ns
+ MIN $generic_ext_flop_th ns
+ CLKPORT "CPLD_REFCLK" ;
+
+#####################################################################
+# Clock Shift paths
+#####################################################################
+# pll_ref_clk_adjusted flip-flops will show hold violations from pll_ref_clk signals
+# as Diamond fails to recognize the proper edges to use for the timing analysis.
+# A multi-cycle constraint is used to analyze against the previous ref_clk cycle.
+#
+# *Launch Edge(with adjustments)
+# |
+# | * Launch edge(according to Diamond)
+# | |
+# | |
+# ref_clk __/-----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\
+# shifted clk ----\_____/-----\_____/-----\_____/-----\_____/-----\_____/-----\____
+# |
+# |
+# Capture edge
+
+MULTICYCLE FROM CLKNET "pll_ref_clk" TO CLKNET "pll_ref_clk_adjusted" 0 X;
+
+
+######################################################################################
+# Pin Location Information
+######################################################################################
+LOCATE COMP "TX0_SW3_B" SITE "B1" ;
+LOCATE COMP "MB_FPGA_GPIO[1]" SITE "D3" ;
+LOCATE COMP "MB_CTRL_CS" SITE "D1" ;
+LOCATE COMP "MB_CTRL_MOSI" SITE "E2" ;
+LOCATE COMP "MB_FPGA_GPIO[12]" SITE "E3" ;
+LOCATE COMP "MB_FPGA_GPIO[9]" SITE "C1" ;
+LOCATE COMP "MB_FPGA_GPIO[10]" SITE "D2" ;
+LOCATE COMP "MB_CTRL_SCK" SITE "E1" ;
+LOCATE COMP "MB_FPGA_GPIO[13]" SITE "F2" ;
+LOCATE COMP "MB_FPGA_GPIO[2]" SITE "F4" ;
+LOCATE COMP "MB_FPGA_GPIO[0]" SITE "G6" ;
+LOCATE COMP "MB_FPGA_GPIO[5]" SITE "F3" ;
+LOCATE COMP "MB_FPGA_GPIO[6]" SITE "F1" ;
+LOCATE COMP "MB_FPGA_GPIO[4]" SITE "G5" ;
+LOCATE COMP "MB_CTRL_MISO" SITE "G4" ;
+LOCATE COMP "MB_FPGA_GPIO[8]" SITE "G2" ;
+LOCATE COMP "MB_FPGA_GPIO[7]" SITE "G3" ;
+LOCATE COMP "MB_FPGA_GPIO[11]" SITE "F5" ;
+LOCATE COMP "MB_FPGA_GPIO[3]" SITE "H6" ;
+LOCATE COMP "TX1_SW3_A" SITE "G1" ;
+LOCATE COMP "TX0_SW6_A" SITE "H2" ;
+LOCATE COMP "TX0_SW4_B" SITE "H4" ;
+LOCATE COMP "TX1_SW3_B" SITE "H3" ;
+LOCATE COMP "TX0_SW6_B" SITE "J6" ;
+LOCATE COMP "TX1_SW6_B" SITE "H1" ;
+LOCATE COMP "MB_SYNTH_SYNC" SITE "J1" ;
+LOCATE COMP "TX1_SW6_A" SITE "J3" ;
+LOCATE COMP "TX0_SW4_A" SITE "J2" ;
+LOCATE COMP "TX0_SW3_A" SITE "H5" ;
+LOCATE COMP "TX1_SW4_B" SITE "K1" ;
+LOCATE COMP "TX1_SW4_A" SITE "J4" ;
+LOCATE COMP "TX0_SW5_B" SITE "K3" ;
+LOCATE COMP "CTRL_REG_ARST" SITE "K2" ;
+LOCATE COMP "TX0_SW5_A" SITE "J5" ;
+LOCATE COMP "RX1_SW11_V3" SITE "L1" ;
+LOCATE COMP "RX0_DSA1_n[3]" SITE "L3" ;
+LOCATE COMP "RX0_SW11_V3" SITE "K4" ;
+LOCATE COMP "RX0_DSA1_n[1]" SITE "L5" ;
+LOCATE COMP "RX0_DSA1_n[2]" SITE "L2" ;
+LOCATE COMP "TX1_SW5_B" SITE "M1" ;
+LOCATE COMP "CH1_TX_LED" SITE "K5" ;
+LOCATE COMP "TX1_DSA2[2]" SITE "L4" ;
+LOCATE COMP "RX1_DSA2_n[4]" SITE "N2" ;
+LOCATE COMP "RX1_DSA3_B_n[4]" SITE "P1" ;
+LOCATE COMP "RX0_SW5_A" SITE "M3" ;
+LOCATE COMP "TX1_SW5_A" SITE "N1" ;
+LOCATE COMP "RX0_DSA1_n[4]" SITE "M2" ;
+LOCATE COMP "RX1_DSA2_n[3]" SITE "N3" ;
+LOCATE COMP "RX0_DSA3_B_n[1]" SITE "R1" ;
+LOCATE COMP "RX0_DSA2_n[1]" SITE "P2" ;
+LOCATE COMP "RX0_DSA2_n[3]" SITE "P4" ;
+LOCATE COMP "RX0_DSA3_B_n[3]" SITE "T4" ;
+LOCATE COMP "RX1_DSA3_B_n[3]" SITE "T2" ;
+LOCATE COMP "RX0_DSA3_B_n[2]" SITE "R3" ;
+LOCATE COMP "RX0_DSA2_n[4]" SITE "R5" ;
+LOCATE COMP "RX1_DSA1_n[3]" SITE "P5" ;
+LOCATE COMP "RX1_DSA3_B_n[2]" SITE "T3" ;
+LOCATE COMP "RX1_DSA3_B_n[1]" SITE "R4" ;
+LOCATE COMP "RX0_DSA3_B_n[4]" SITE "T5" ;
+LOCATE COMP "TX0_SW10_A" SITE "R6" ;
+LOCATE COMP "RX1_DSA2_n[1]" SITE "P6" ;
+LOCATE COMP "TX0_SW10_B" SITE "T6" ;
+LOCATE COMP "RX1_DSA1_n[2]" SITE "N6" ;
+LOCATE COMP "RX1_SW4_A" SITE "L7" ;
+LOCATE COMP "RX0_SW1_A" SITE "R7" ;
+LOCATE COMP "RX0_SW2_A" SITE "P7" ;
+LOCATE COMP "RX1_SW5_B" SITE "M7" ;
+LOCATE COMP "RX0_DSA2_n[2]" SITE "N7" ;
+LOCATE COMP "RX0_SW5_B" SITE "M6" ;
+LOCATE COMP "CH1_RX_LED" SITE "L8" ;
+LOCATE COMP "RX0_SW1_B" SITE "T7" ;
+LOCATE COMP "RX1_SW6_A" SITE "R8" ;
+LOCATE COMP "RX1_SW2_A" SITE "P8" ;
+LOCATE COMP "RX1_SW6_B" SITE "T8" ;
+LOCATE COMP "RX1_DSA1_n[1]" SITE "N8" ;
+LOCATE COMP "TX1_DSA2[5]" SITE "L9" ;
+LOCATE COMP "RX1_DSA2_n[2]" SITE "M8" ;
+LOCATE COMP "RX0_SW11_V1" SITE "N9" ;
+LOCATE COMP "RX0_SW6_B" SITE "T9" ;
+LOCATE COMP "RX1_SW11_V2" SITE "P9" ;
+LOCATE COMP "RX1_SW3_V1" SITE "R9" ;
+LOCATE COMP "RX0_SW6_A" SITE "T10" ;
+LOCATE COMP "RX1_DSA1_n[4]" SITE "M9" ;
+LOCATE COMP "RX1_SW5_A" SITE "L10" ;
+LOCATE COMP "RX0_SW10_V1" SITE "P10" ;
+LOCATE COMP "RX0_SW3_V3" SITE "R10" ;
+LOCATE COMP "RX1_SW10_V1" SITE "N10" ;
+LOCATE COMP "RX0_DSA3_A_n[1]" SITE "M11" ;
+LOCATE COMP "TX0_SW11_B" SITE "T11" ;
+LOCATE COMP "RX1_LO2_MUXOUT" SITE "P11" ;
+LOCATE COMP "CH0_RX2_LED" SITE "M10" ;
+LOCATE COMP "CH0_TX_LED" SITE "N11" ;
+LOCATE COMP "RX0_LO1_MUXOUT" SITE "R13" ;
+LOCATE COMP "RX1_SW3_V2" SITE "T14" ;
+LOCATE COMP "CH0_RX_LED" SITE "R11" ;
+LOCATE COMP "TX0_SW11_A" SITE "T12" ;
+LOCATE COMP "RX0_LO2_MUXOUT" SITE "P12" ;
+LOCATE COMP "RX0_SW3_V1" SITE "T13" ;
+LOCATE COMP "RX1_SW11_V1" SITE "T15" ;
+LOCATE COMP "RX1_SW3_V3" SITE "R14" ;
+LOCATE COMP "RX0_SW11_V2" SITE "R16" ;
+LOCATE COMP "RX0_DSA3_A_n[2]" SITE "P15" ;
+LOCATE COMP "RX0_SW9_V1" SITE "N14" ;
+LOCATE COMP "P7V_PG_A" SITE "N16" ;
+LOCATE COMP "P7V_ENABLE_B" SITE "P16" ;
+LOCATE COMP "P7V_ENABLE_A" SITE "M15" ;
+LOCATE COMP "P3D3VA_ENABLE" SITE "N15" ;
+LOCATE COMP "RX1_LO1_MUXOUT" SITE "M14" ;
+LOCATE COMP "RX1_SW9_V1" SITE "L13" ;
+LOCATE COMP "P7V_PG_B" SITE "M16" ;
+LOCATE COMP "RX0_SW4_A" SITE "K11" ;
+LOCATE COMP "RX0_DSA3_A_n[4]" SITE "L15" ;
+LOCATE COMP "RX1_DSA3_A_n[1]" SITE "K12" ;
+LOCATE COMP "RX0_DSA3_A_n[3]" SITE "L14" ;
+LOCATE COMP "RX1_DSA3_A_n[2]" SITE "K13" ;
+LOCATE COMP "RX1_LO2_SYNC" SITE "L16" ;
+LOCATE COMP "RX0_SW3_V2" SITE "L12" ;
+LOCATE COMP "RX1_LO2_SCK" SITE "K15" ;
+LOCATE COMP "RX0_LO2_CSB" SITE "J11" ;
+LOCATE COMP "RX1_DSA3_A_n[3]" SITE "K14" ;
+LOCATE COMP "RX1_DSA3_A_n[4]" SITE "J13" ;
+LOCATE COMP "RX0_LO2_SYNC" SITE "K16" ;
+LOCATE COMP "TX1_LO1_CSB" SITE "H11" ;
+LOCATE COMP "RX1_LO1_SCK" SITE "J15" ;
+LOCATE COMP "TX1_LO2_SYNC" SITE "J14" ;
+LOCATE COMP "RX0_LO1_SCK" SITE "J16" ;
+LOCATE COMP "RX1_LO1_SYNC" SITE "H16" ;
+LOCATE COMP "RX0_LO2_SCK" SITE "J12" ;
+LOCATE COMP "CPLD_REFCLK" SITE "H14" ;
+LOCATE COMP "RX1_LO2_CSB" SITE "H13" ;
+LOCATE COMP "RX0_LO1_SYNC" SITE "H15" ;
+LOCATE COMP "RX0_LO1_CSB" SITE "G16" ;
+LOCATE COMP "TX0_LO1_SCK" SITE "H12" ;
+LOCATE COMP "TX1_LO2_SCK" SITE "G14" ;
+LOCATE COMP "TX1_DSA2[4]" SITE "G11" ;
+LOCATE COMP "TX0_LO2_SCK" SITE "G15" ;
+LOCATE COMP "RX1_LO1_CSB" SITE "G13" ;
+LOCATE COMP "TX0_LO2_CSB" SITE "F16" ;
+LOCATE COMP "RX1_SW7_SW8_CTRL" SITE "F12" ;
+LOCATE COMP "TX0_LO1_SYNC" SITE "F14" ;
+LOCATE COMP "TX0_LO2_MUXOUT" SITE "G12" ;
+LOCATE COMP "RX_TX_LO_SDI" SITE "F15" ;
+LOCATE COMP "TX0_DSA1[3]" SITE "F13" ;
+LOCATE COMP "TX1_LO2_CSB" SITE "E16" ;
+LOCATE COMP "TX0_DSA1[6]" SITE "D15" ;
+LOCATE COMP "TX1_LO1_SYNC" SITE "C16" ;
+LOCATE COMP "TX1_LO1_SCK" SITE "E14" ;
+LOCATE COMP "TX0_LO1_CSB" SITE "D16" ;
+LOCATE COMP "TX1_DSA1[4]" SITE "B16" ;
+LOCATE COMP "TX0_LO2_SYNC" SITE "E15" ;
+LOCATE COMP "TX1_SW1_SW2_CTRL" SITE "C15" ;
+LOCATE COMP "TX1_DSA1[3]" SITE "D14" ;
+LOCATE COMP "TX1_DSA1[5]" SITE "A15" ;
+LOCATE COMP "TX1_DSA1[6]" SITE "B14" ;
+LOCATE COMP "TX1_LO2_MUXOUT" SITE "B12" ;
+LOCATE COMP "TX1_DSA1[2]" SITE "C12" ;
+LOCATE COMP "TX0_DSA1[4]" SITE "A14" ;
+LOCATE COMP "TX0_DSA1[5]" SITE "B13" ;
+LOCATE COMP "TX0_SW1_SW2_CTRL" SITE "A12" ;
+LOCATE COMP "TX0_SW14_V1" SITE "B11" ;
+LOCATE COMP "RX0_SW7_SW8_CTRL" SITE "D11" ;
+LOCATE COMP "TX0_DSA1[2]" SITE "C11" ;
+LOCATE COMP "TX1_DSA2[3]" SITE "F10" ;
+LOCATE COMP "CH1_RX2_LED" SITE "A11" ;
+LOCATE COMP "TX0_DSA2[5]" SITE "E10" ;
+LOCATE COMP "TX1_LO1_MUXOUT" SITE "D10" ;
+LOCATE COMP "TX0_SW13_V1" SITE "E11" ;
+LOCATE COMP "TX1_DSA2[6]" SITE "F9" ;
+LOCATE COMP "TX1_SW13_V1" SITE "A10" ;
+LOCATE COMP "TX1_SW14_V1" SITE "B9" ;
+LOCATE COMP "TX0_SW8_V1" SITE "D9" ;
+LOCATE COMP "TX1_SW8_V1" SITE "C9" ;
+LOCATE COMP "TX1_SW10_A" SITE "F8" ;
+LOCATE COMP "TX0_LO1_MUXOUT" SITE "A9" ;
+LOCATE COMP "RX1_SW1_B" SITE "E9" ;
+LOCATE COMP "TX1_SW8_V2" SITE "D8" ;
+LOCATE COMP "TX1_SW8_V3" SITE "A8" ;
+LOCATE COMP "TX0_SW8_V2" SITE "C8" ;
+LOCATE COMP "RX1_SW1_A" SITE "E8" ;
+LOCATE COMP "TX1_SW11_B" SITE "F7" ;
+LOCATE COMP "TX1_SW11_A" SITE "D7" ;
+LOCATE COMP "TX0_DSA2[3]" SITE "C7" ;
+LOCATE COMP "TX0_SW7_B" SITE "E6" ;
+LOCATE COMP "TX1_SW9_B" SITE "B7" ;
+LOCATE COMP "TX1_SW10_B" SITE "E7" ;
+LOCATE COMP "TX0_DSA2[4]" SITE "D6" ;
+LOCATE COMP "TX0_DSA2[6]" SITE "B4" ;
+LOCATE COMP "TX0_DSA2[2]" SITE "A3" ;
+LOCATE COMP "TX0_SW8_V3" SITE "B6" ;
+LOCATE COMP "TX0_SW9_A" SITE "A5" ;
+LOCATE COMP "TX1_SW7_B" SITE "C5" ;
+LOCATE COMP "TX0_SW9_B" SITE "A4" ;
+LOCATE COMP "TX1_SW9_A" SITE "B5" ;
+LOCATE COMP "TX1_SW7_A" SITE "B3" ;
+LOCATE COMP "TX0_SW7_A" SITE "C4" ;
+
+
+######################################################################################
+# Bank Voltage Information
+######################################################################################
+BANK 5 VCCIO 1.8 V;
+BANK 4 VCCIO 1.8 V;
+BANK 3 VCCIO 3.3 V;
+BANK 2 VCCIO 3.3 V;
+BANK 1 VCCIO 3.3 V;
+BANK 0 VCCIO 3.3 V;
+
+
+######################################################################################
+# Pin Drive information
+######################################################################################
+#Below is a starting point for Drive strength selection, each designer must decide what drive strength is appropriate for their design
+#HYSTERSIS is not specified for all inputs and assume default value, they may be turned on as follows SMALL and LARGE are available options, assuming you want LVCMOS25
+#IOBUF PORT "SigName" IO_TYPE=LVCMOS25 PULLMODE=NONE CLAMP=OFF HYSTERESIS=SMALL ;
+
+#CLAMP=OFF set to all pins, may be changed as desired.
+#Drive set to 8mA SLOW for all pins, may be changed as desired. In future could have tool auto determine best drive, but for now defaults to 8mA slow
+
+
+IOBUF PORT "TX0_SW3_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[1]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_CTRL_CS" IO_TYPE=LVCMOS18 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "MB_CTRL_MOSI" IO_TYPE=LVCMOS18 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[12]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[9]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[10]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_CTRL_SCK" IO_TYPE=LVCMOS18 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[13]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[2]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[0]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[5]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[6]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[4]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_CTRL_MISO" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[8]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[7]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[11]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_FPGA_GPIO[3]" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW3_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW6_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW4_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW3_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW6_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW6_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "MB_SYNTH_SYNC" IO_TYPE=LVCMOS18 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "TX1_SW6_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW4_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW3_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW4_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW4_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW5_B" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CTRL_REG_ARST" IO_TYPE=LVCMOS18 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "TX0_SW5_A" IO_TYPE=LVCMOS18 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW11_V3" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA1_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW11_V3" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA1_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA1_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW5_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CH1_TX_LED" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA2[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA2_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_B_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW5_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW5_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA1_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA2_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_B_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA2_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA2_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_B_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_B_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_B_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA2_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA1_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_B_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_B_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_B_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW10_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA2_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW10_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA1_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW4_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW1_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW2_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW5_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA2_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW5_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CH1_RX_LED" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW1_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW6_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW2_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW6_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA1_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA2[5]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA2_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW11_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW6_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW11_V2" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW3_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW6_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA1_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW5_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW10_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW3_V3" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW10_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_A_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW11_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO2_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "CH0_RX2_LED" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CH0_TX_LED" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO1_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX1_SW3_V2" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CH0_RX_LED" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW11_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO2_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX0_SW3_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW11_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW3_V3" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW11_V2" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_A_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW9_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "P7V_PG_A" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "P7V_ENABLE_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "P7V_ENABLE_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "P3D3VA_ENABLE" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO1_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX1_SW9_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "P7V_PG_B" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX0_SW4_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_A_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_A_n[1]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_DSA3_A_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_A_n[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO2_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW3_V2" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO2_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO2_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_A_n[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_DSA3_A_n[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO2_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO1_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO1_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO2_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO1_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO1_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO2_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CPLD_REFCLK" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX1_LO2_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO1_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_LO1_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO1_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO2_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA2[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO2_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_LO1_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO2_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW7_SW8_CTRL" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO1_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO2_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX_TX_LO_SDI" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=16 SLEWRATE=FAST CLAMP=OFF ;
+IOBUF PORT "TX0_DSA1[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO2_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA1[6]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO1_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO1_SCK" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO1_CSB" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA1[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO2_SYNC" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW1_SW2_CTRL" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA1[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA1[5]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA1[6]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO2_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "TX1_DSA1[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA1[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA1[5]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW1_SW2_CTRL" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW14_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX0_SW7_SW8_CTRL" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA1[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA2[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "CH1_RX2_LED" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA2[5]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_LO1_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "TX0_SW13_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_DSA2[6]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW13_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW14_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW8_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW8_V1" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW10_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_LO1_MUXOUT" IO_TYPE=LVCMOS33 PULLMODE=NONE CLAMP=OFF ;
+IOBUF PORT "RX1_SW1_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW8_V2" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW8_V3" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW8_V2" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "RX1_SW1_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW11_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW11_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA2[3]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW7_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW9_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW10_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA2[4]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA2[6]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_DSA2[2]" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW8_V3" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW9_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW7_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW9_B" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW9_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX1_SW7_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
+IOBUF PORT "TX0_SW7_A" IO_TYPE=LVCMOS33 PULLMODE=NONE DRIVE=8 SLEWRATE=SLOW CLAMP=OFF ;
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.sty b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.sty
new file mode 100644
index 000000000..b9c890e4e
--- /dev/null
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/lattice/zbx_top_cpld.sty
@@ -0,0 +1,205 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE strategy>
+<Strategy version="1.0" predefined="0" description="" label="zbx_cpld_strat">
+ <Property name="PROP_BD_CmdLineArgs" value="" time="0"/>
+ <Property name="PROP_BD_EdfHardtimer" value="Enable" time="0"/>
+ <Property name="PROP_BD_EdfInBusNameConv" value="None" time="0"/>
+ <Property name="PROP_BD_EdfInLibPath" value="" time="0"/>
+ <Property name="PROP_BD_EdfInRemLoc" value="Off" time="0"/>
+ <Property name="PROP_BD_EdfMemPath" value="" time="0"/>
+ <Property name="PROP_BD_ParSearchPath" value="" time="0"/>
+ <Property name="PROP_BIT_AddressBitGen" value="Increment" time="0"/>
+ <Property name="PROP_BIT_AllowReadBitGen" value="Disable" time="0"/>
+ <Property name="PROP_BIT_ByteWideBitMirror" value="Disable" time="0"/>
+ <Property name="PROP_BIT_CapReadBitGen" value="Disable" time="0"/>
+ <Property name="PROP_BIT_ConModBitGen" value="Disable" time="0"/>
+ <Property name="PROP_BIT_CreateBitFile" value="True" time="0"/>
+ <Property name="PROP_BIT_DisRAMResBitGen" value="True" time="0"/>
+ <Property name="PROP_BIT_DisableUESBitgen" value="False" time="0"/>
+ <Property name="PROP_BIT_DonePinBitGen" value="Pullup" time="0"/>
+ <Property name="PROP_BIT_DoneSigBitGen" value="4" time="0"/>
+ <Property name="PROP_BIT_EnIOBitGen" value="TriStateDuringReConfig" time="0"/>
+ <Property name="PROP_BIT_EnIntOscBitGen" value="Disable" time="0"/>
+ <Property name="PROP_BIT_ExtClockBitGen" value="False" time="0"/>
+ <Property name="PROP_BIT_GSREnableBitGen" value="True" time="0"/>
+ <Property name="PROP_BIT_GSRRelOnBitGen" value="DoneIn" time="0"/>
+ <Property name="PROP_BIT_GranTimBitGen" value="0" time="0"/>
+ <Property name="PROP_BIT_IOTriRelBitGen" value="Cycle 2" time="0"/>
+ <Property name="PROP_BIT_JTAGEnableBitGen" value="False" time="0"/>
+ <Property name="PROP_BIT_LenBitsBitGen" value="24" time="0"/>
+ <Property name="PROP_BIT_MIFFileBitGen" value="" time="0"/>
+ <Property name="PROP_BIT_NoHeader" value="False" time="0"/>
+ <Property name="PROP_BIT_OutFormatBitGen" value="Bit File (Binary)" time="0"/>
+ <Property name="PROP_BIT_OutFormatBitGen_REF" value="" time="0"/>
+ <Property name="PROP_BIT_OutFormatPromGen" value="Intel Hex 32-bit" time="0"/>
+ <Property name="PROP_BIT_ParityCheckBitGen" value="True" time="0"/>
+ <Property name="PROP_BIT_ReadBackBitGen" value="Flash" time="0"/>
+ <Property name="PROP_BIT_ReadCaptureBitGen" value="Disable" time="0"/>
+ <Property name="PROP_BIT_RemZeroFramesBitGen" value="False" time="0"/>
+ <Property name="PROP_BIT_RunDRCBitGen" value="True" time="0"/>
+ <Property name="PROP_BIT_SearchPthBitGen" value="" time="0"/>
+ <Property name="PROP_BIT_StartUpClkBitGen" value="Cclk" time="0"/>
+ <Property name="PROP_BIT_SynchIOBitGen" value="True" time="0"/>
+ <Property name="PROP_BIT_SysClockConBitGen" value="Reset" time="0"/>
+ <Property name="PROP_BIT_SysConBitGen" value="Reset" time="0"/>
+ <Property name="PROP_BIT_WaitStTimBitGen" value="5" time="0"/>
+ <Property name="PROP_IOTIMING_AllSpeed" value="False" time="0"/>
+ <Property name="PROP_LST_AllowDUPMod" value="False" time="0"/>
+ <Property name="PROP_LST_CarryChain" value="True" time="0"/>
+ <Property name="PROP_LST_CarryChainLength" value="0" time="0"/>
+ <Property name="PROP_LST_CmdLineArgs" value="" time="0"/>
+ <Property name="PROP_LST_DSPStyle" value="DSP" time="0"/>
+ <Property name="PROP_LST_DSPUtil" value="100" time="0"/>
+ <Property name="PROP_LST_DecodeUnreachableStates" value="False" time="0"/>
+ <Property name="PROP_LST_DisableDistRam" value="False" time="0"/>
+ <Property name="PROP_LST_EBRUtil" value="100" time="0"/>
+ <Property name="PROP_LST_EdfFrequency" value="100" time="0"/>
+ <Property name="PROP_LST_EdfHardtimer" value="Enable" time="0"/>
+ <Property name="PROP_LST_EdfInLibPath" value="" time="0"/>
+ <Property name="PROP_LST_EdfInRemLoc" value="Off" time="0"/>
+ <Property name="PROP_LST_EdfMemPath" value="" time="0"/>
+ <Property name="PROP_LST_FIXGATEDCLKS" value="True" time="0"/>
+ <Property name="PROP_LST_FSMEncodeStyle" value="Auto" time="0"/>
+ <Property name="PROP_LST_ForceGSRInfer" value="Auto" time="0"/>
+ <Property name="PROP_LST_IOInsertion" value="True" time="0"/>
+ <Property name="PROP_LST_InterFileDump" value="False" time="0"/>
+ <Property name="PROP_LST_LoopLimit" value="1950" time="0"/>
+ <Property name="PROP_LST_MaxFanout" value="1000" time="0"/>
+ <Property name="PROP_LST_MuxStyle" value="Auto" time="0"/>
+ <Property name="PROP_LST_NumCriticalPaths" value="3" time="0"/>
+ <Property name="PROP_LST_OptimizeGoal" value="Balanced" time="0"/>
+ <Property name="PROP_LST_PropagatConst" value="True" time="0"/>
+ <Property name="PROP_LST_RAMStyle" value="Auto" time="0"/>
+ <Property name="PROP_LST_ROMStyle" value="Auto" time="0"/>
+ <Property name="PROP_LST_RemoveDupRegs" value="True" time="0"/>
+ <Property name="PROP_LST_ResolvedMixedDrivers" value="False" time="0"/>
+ <Property name="PROP_LST_ResourceShare" value="True" time="0"/>
+ <Property name="PROP_LST_UseIOReg" value="Auto" time="0"/>
+ <Property name="PROP_LST_UseLPF" value="True" time="0"/>
+ <Property name="PROP_LST_VHDL2008" value="False" time="0"/>
+ <Property name="PROP_MAPSTA_AnalysisOption" value="Standard Setup and Hold Analysis" time="0"/>
+ <Property name="PROP_MAPSTA_AutoTiming" value="True" time="0"/>
+ <Property name="PROP_MAPSTA_CheckUnconstrainedConns" value="False" time="0"/>
+ <Property name="PROP_MAPSTA_CheckUnconstrainedPaths" value="False" time="0"/>
+ <Property name="PROP_MAPSTA_FullName" value="False" time="0"/>
+ <Property name="PROP_MAPSTA_NumUnconstrainedPaths" value="0" time="0"/>
+ <Property name="PROP_MAPSTA_ReportStyle" value="Verbose Timing Report" time="0"/>
+ <Property name="PROP_MAPSTA_RouteEstAlogtithm" value="0" time="0"/>
+ <Property name="PROP_MAPSTA_RptAsynTimLoop" value="False" time="0"/>
+ <Property name="PROP_MAPSTA_WordCasePaths" value="1" time="0"/>
+ <Property name="PROP_MAP_IgnorePreErr" value="True" time="0"/>
+ <Property name="PROP_MAP_MAPIORegister" value="Output" time="0"/>
+ <Property name="PROP_MAP_MAPInferGSR" value="True" time="0"/>
+ <Property name="PROP_MAP_MapModArgs" value="" time="0"/>
+ <Property name="PROP_MAP_OvermapDevice" value="False" time="0"/>
+ <Property name="PROP_MAP_PackLogMapDes" value="0" time="0"/>
+ <Property name="PROP_MAP_RegRetiming" value="False" time="0"/>
+ <Property name="PROP_MAP_SigCrossRef" value="False" time="0"/>
+ <Property name="PROP_MAP_SymCrossRef" value="False" time="0"/>
+ <Property name="PROP_MAP_TimingDriven" value="False" time="0"/>
+ <Property name="PROP_MAP_TimingDrivenNodeRep" value="False" time="0"/>
+ <Property name="PROP_MAP_TimingDrivenPack" value="False" time="0"/>
+ <Property name="PROP_PARSTA_AnalysisOption" value="Standard Setup and Hold Analysis" time="0"/>
+ <Property name="PROP_PARSTA_AutoTiming" value="True" time="0"/>
+ <Property name="PROP_PARSTA_CheckUnconstrainedConns" value="True" time="0"/>
+ <Property name="PROP_PARSTA_CheckUnconstrainedPaths" value="True" time="0"/>
+ <Property name="PROP_PARSTA_FullName" value="False" time="0"/>
+ <Property name="PROP_PARSTA_NumUnconstrainedPaths" value="0" time="0"/>
+ <Property name="PROP_PARSTA_ReportStyle" value="Verbose Timing Report" time="0"/>
+ <Property name="PROP_PARSTA_RptAsynTimLoop" value="False" time="0"/>
+ <Property name="PROP_PARSTA_SpeedForHoldAnalysis" value="m" time="0"/>
+ <Property name="PROP_PARSTA_SpeedForSetupAnalysis" value="default" time="0"/>
+ <Property name="PROP_PARSTA_WordCasePaths" value="10" time="0"/>
+ <Property name="PROP_PAR_CrDlyStFileParDes" value="True" time="0"/>
+ <Property name="PROP_PAR_DisableTDParDes" value="False" time="0"/>
+ <Property name="PROP_PAR_EffortParDes" value="5" time="0"/>
+ <Property name="PROP_PAR_MultiSeedSortMode" value="Worst Slack" time="0"/>
+ <Property name="PROP_PAR_NewRouteParDes" value="NBR" time="0"/>
+ <Property name="PROP_PAR_PARClockSkew" value="Off" time="0"/>
+ <Property name="PROP_PAR_PARModArgs" value="" time="0"/>
+ <Property name="PROP_PAR_ParMultiNodeList" value="" time="0"/>
+ <Property name="PROP_PAR_ParRunPlaceOnly" value="False" time="0"/>
+ <Property name="PROP_PAR_PlcIterParDes" value="1" time="0"/>
+ <Property name="PROP_PAR_PlcStCostTblParDes" value="1" time="0"/>
+ <Property name="PROP_PAR_PrefErrorOut" value="True" time="0"/>
+ <Property name="PROP_PAR_RemoveDir" value="True" time="0"/>
+ <Property name="PROP_PAR_RouteDlyRedParDes" value="1" time="0"/>
+ <Property name="PROP_PAR_RoutePassParDes" value="6" time="0"/>
+ <Property name="PROP_PAR_RouteResOptParDes" value="3" time="0"/>
+ <Property name="PROP_PAR_RoutingCDP" value="0" time="0"/>
+ <Property name="PROP_PAR_RoutingCDR" value="0" time="0"/>
+ <Property name="PROP_PAR_RunParWithTrce" value="False" time="0"/>
+ <Property name="PROP_PAR_RunTimeReduction" value="True" time="0"/>
+ <Property name="PROP_PAR_SaveBestRsltParDes" value="1" time="0"/>
+ <Property name="PROP_PAR_StopZero" value="True" time="0"/>
+ <Property name="PROP_PAR_parHold" value="On" time="0"/>
+ <Property name="PROP_PAR_parPathBased" value="Off" time="0"/>
+ <Property name="PROP_PRE_CmdLineArgs" value="" time="0"/>
+ <Property name="PROP_PRE_EdfArrayBoundsCase" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfAutoResOfRam" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfClockDomainCross" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfDSPAcrossHie" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfFullCase" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfIgnoreRamRWCol" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfMissConstraint" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfNetFanout" value="True" time="0"/>
+ <Property name="PROP_PRE_EdfParaCase" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfReencodeFSM" value="True" time="0"/>
+ <Property name="PROP_PRE_EdfResSharing" value="True" time="0"/>
+ <Property name="PROP_PRE_EdfTimingViolation" value="True" time="0"/>
+ <Property name="PROP_PRE_EdfUseSafeFSM" value="False" time="0"/>
+ <Property name="PROP_PRE_EdfVlog2001" value="True" time="0"/>
+ <Property name="PROP_PRE_VSynComArea" value="True" time="0"/>
+ <Property name="PROP_PRE_VSynCritcal" value="3" time="0"/>
+ <Property name="PROP_PRE_VSynFSM" value="Auto" time="0"/>
+ <Property name="PROP_PRE_VSynFreq" value="200" time="0"/>
+ <Property name="PROP_PRE_VSynGSR" value="False" time="0"/>
+ <Property name="PROP_PRE_VSynGatedClk" value="False" time="0"/>
+ <Property name="PROP_PRE_VSynIOPad" value="False" time="0"/>
+ <Property name="PROP_PRE_VSynOutNetForm" value="None" time="0"/>
+ <Property name="PROP_PRE_VSynOutPref" value="True" time="0"/>
+ <Property name="PROP_PRE_VSynRepClkFreq" value="True" time="0"/>
+ <Property name="PROP_PRE_VSynRetime" value="True" time="0"/>
+ <Property name="PROP_PRE_VSynTimSum" value="10" time="0"/>
+ <Property name="PROP_PRE_VSynTransform" value="True" time="0"/>
+ <Property name="PROP_PRE_VSyninpd" value="0" time="0"/>
+ <Property name="PROP_PRE_VSynoutd" value="0" time="0"/>
+ <Property name="PROP_SYN_ClockConversion" value="True" time="0"/>
+ <Property name="PROP_SYN_CmdLineArgs" value="" time="0"/>
+ <Property name="PROP_SYN_DisableRegisterRep" value="False" time="0"/>
+ <Property name="PROP_SYN_EdfAllowDUPMod" value="False" time="0"/>
+ <Property name="PROP_SYN_EdfArea" value="False" time="0"/>
+ <Property name="PROP_SYN_EdfArrangeVHDLFiles" value="True" time="0"/>
+ <Property name="PROP_SYN_EdfDefEnumEncode" value="Default" time="0"/>
+ <Property name="PROP_SYN_EdfFanout" value="1000" time="0"/>
+ <Property name="PROP_SYN_EdfFrequency" value="100" time="0"/>
+ <Property name="PROP_SYN_EdfGSR" value="Auto" time="0"/>
+ <Property name="PROP_SYN_EdfInsertIO" value="False" time="0"/>
+ <Property name="PROP_SYN_EdfNumCritPath" value="3" time="0"/>
+ <Property name="PROP_SYN_EdfNumStartEnd" value="" time="0"/>
+ <Property name="PROP_SYN_EdfOutNetForm" value="None" time="0"/>
+ <Property name="PROP_SYN_EdfPushTirstates" value="True" time="0"/>
+ <Property name="PROP_SYN_EdfResSharing" value="True" time="0"/>
+ <Property name="PROP_SYN_EdfRunRetiming" value="Pipelining Only" time="0"/>
+ <Property name="PROP_SYN_EdfSymFSM" value="True" time="0"/>
+ <Property name="PROP_SYN_EdfUnconsClk" value="False" time="0"/>
+ <Property name="PROP_SYN_EdfVerilogInput" value="Verilog 2001" time="0"/>
+ <Property name="PROP_SYN_ExportSetting" value="No" time="0"/>
+ <Property name="PROP_SYN_LibPath" value="" time="0"/>
+ <Property name="PROP_SYN_ResolvedMixedDrivers" value="False" time="0"/>
+ <Property name="PROP_SYN_UpdateCompilePtTimData" value="False" time="0"/>
+ <Property name="PROP_SYN_UseLPF" value="True" time="0"/>
+ <Property name="PROP_SYN_VHDL2008" value="False" time="0"/>
+ <Property name="PROP_THERMAL_DefaultFreq" value="64" time="0"/>
+ <Property name="PROP_TIM_MaxDelSimDes" value="" time="0"/>
+ <Property name="PROP_TIM_MinSpeedGrade" value="False" time="0"/>
+ <Property name="PROP_TIM_ModPreSimDes" value="" time="0"/>
+ <Property name="PROP_TIM_NegStupHldTim" value="True" time="0"/>
+ <Property name="PROP_TIM_TimSimGenPUR" value="True" time="0"/>
+ <Property name="PROP_TIM_TimSimGenX" value="False" time="0"/>
+ <Property name="PROP_TIM_TimSimHierSep" value="" time="0"/>
+ <Property name="PROP_TIM_TransportModeOfPathDelay" value="False" time="0"/>
+ <Property name="PROP_TIM_TrgtSpeedGrade" value="" time="0"/>
+ <Property name="PROP_TIM_WriteVerboseNetlist" value="False" time="0"/>
+ <Property name="PROP_TMCHK_EnableCheck" value="True" time="0"/>
+</Strategy>
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/basic_regs.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/basic_regs.v
index b208c020b..c3a89e887 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/basic_regs.v
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/basic_regs.v
@@ -38,6 +38,12 @@ module basic_regs #(
//----------------------------------------------------------
reg [SCRATCH_REG_SIZE-1:0] scratch_reg = {SCRATCH_REG_SIZE {1'b0}};
+`ifdef VARIANT_XO3
+ localparam VARIANT_ID = VARIANT_ID_XO3;
+`else
+ localparam VARIANT_ID = VARIANT_ID_MAX10;
+`endif
+
//----------------------------------------------------------
// Handling of CtrlPort
//----------------------------------------------------------
@@ -105,7 +111,6 @@ module basic_regs #(
s_ctrlport_resp_data[SCRATCH_REG_MSB : SCRATCH_REG] <= scratch_reg;
end
-
BASE_ADDRESS + GIT_HASH_REGISTER: begin
`ifdef GIT_HASH
s_ctrlport_resp_data <= `GIT_HASH;
@@ -114,6 +119,11 @@ module basic_regs #(
`endif
end
+ BASE_ADDRESS + SLAVE_VARIANT: begin
+ s_ctrlport_resp_data[VARIANT_REG_MSB : VARIANT_REG]
+ <= VARIANT_ID[VARIANT_REG_SIZE-1:0];
+ end
+
// error on undefined address
default: begin
s_ctrlport_resp_data <= {32{1'b0}};
@@ -150,8 +160,10 @@ endmodule
// This enum is used to create the constants held in the basic registers in both verilog and vhdl.
// </info>
// <value name="BOARD_ID_VALUE" integer="0x4002"/>
-// <value name="CPLD_REVISION" integer="0x21111614"/>
+// <value name="CPLD_REVISION" integer="0x22031611"/>
// <value name="OLDEST_CPLD_REVISION" integer="0x20110611"/>
+// <value name="VARIANT_ID_XO3" integer="0x584F33"/>
+// <value name="VARIANT_ID_MAX10" integer="0x4D4158"/>
// </enumeratedtype>
//
// <register name="SLAVE_SIGNATURE" size="32" offset="0x00" attributes="Readable">
@@ -214,6 +226,19 @@ endmodule
// <info>7 hex digit hash code of the commit</info>
// </bitfield>
// </register>
+//
+// <register name="SLAVE_VARIANT" size="32" offset="0x14" writable="false">
+// <info>
+// Contains information pertaining the variant of the programmable.
+// </info>
+// <bitfield name="VARIANT_REG" range="31..0" initialvalue="0">
+// <info>
+// Returns the variant of the programmable based on the part vendor.
+// MAX10 variants return 0x583033(ASCII for MAX), while the XO3 variant
+// returns 0x584F33 (ASCII for XO3)
+// </info>
+// </bitfield>
+// </register>
// </group>
//</regmap>
//XmlParse xml_off
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/dsa_control.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/dsa_control.v
index abc4b62f9..a84625d63 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/dsa_control.v
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/dsa_control.v
@@ -369,10 +369,16 @@ module dsa_control #(
wire [31:0] ram_tx0_dia = select_gain_table ? table_tx0_doa : ram_datain;
wire [31:0] ram_tx1_dia = select_gain_table ? table_tx1_doa : ram_datain;
+`ifdef VARIANT_XO3
+ localparam RAM_RW_MODE = "B-READ-ONLY" ;
+`else
+ localparam RAM_RW_MODE = "READ-FIRST" ;
+`endif
+
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/tx_dsa_defaults.hex")
@@ -394,7 +400,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/tx_dsa_defaults.hex")
@@ -416,7 +422,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/rx_dsa_defaults.hex")
@@ -438,7 +444,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/rx_dsa_defaults.hex")
@@ -464,7 +470,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/tx_dsa_defaults.hex")
@@ -486,7 +492,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/tx_dsa_defaults.hex")
@@ -508,7 +514,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/rx_dsa_defaults.hex")
@@ -530,7 +536,7 @@ module dsa_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/rx_dsa_defaults.hex")
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/led_control.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/led_control.v
index 5663d348e..f32b09296 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/led_control.v
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/led_control.v
@@ -163,10 +163,17 @@ module led_control #(
ch1_rx_led <= ram_ch1_dob[CH1_TRX1_LED_EN + 0];
end
+`ifdef VARIANT_XO3
+ localparam RAM_RW_MODE = "B-READ-ONLY" ;
+`else
+ localparam RAM_RW_MODE = "READ-FIRST" ;
+`endif
+
+
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("")
@@ -188,7 +195,7 @@ module led_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("")
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/switch_control.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/switch_control.v
index 63ce251b3..5b5290b18 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/switch_control.v
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/register_endpoints/switch_control.v
@@ -370,10 +370,16 @@ module switch_control #(
rx1_switch_11_reg <= ram_rx1_dob[RX_SWITCH_11_MSB: RX_SWITCH_11];
end
+`ifdef VARIANT_XO3
+ localparam RAM_RW_MODE = "B-READ-ONLY" ;
+`else
+ localparam RAM_RW_MODE = "READ-FIRST" ;
+`endif
+
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/tx0_path_defaults.hex")
@@ -394,7 +400,7 @@ module switch_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/tx1_path_defaults.hex")
@@ -415,7 +421,7 @@ module switch_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/rx0_path_defaults.hex")
@@ -436,7 +442,7 @@ module switch_control #(
ram_2port #(
.DWIDTH (32),
.AWIDTH (8),
- .RW_MODE ("READ-FIRST"),
+ .RW_MODE (RAM_RW_MODE),
.RAM_TYPE ("AUTOMATIC"),
.OUT_REG (0),
.INIT_FILE ("register_endpoints/memory_init_files/rx1_path_defaults.hex")
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/regmap/basic_regs_regmap_utils.vh b/fpga/usrp3/top/x400/dboards/zbx/cpld/regmap/basic_regs_regmap_utils.vh
index a7ec2f198..3c8181049 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/regmap/basic_regs_regmap_utils.vh
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/regmap/basic_regs_regmap_utils.vh
@@ -16,6 +16,7 @@
// SLAVE_OLDEST_REVISION : 0x8 (basic_regs.v)
// SLAVE_SCRATCH : 0xC (basic_regs.v)
// GIT_HASH_REGISTER : 0x10 (basic_regs.v)
+ // SLAVE_VARIANT : 0x14 (basic_regs.v)
//===============================================================================
// RegTypes
@@ -26,10 +27,12 @@
//===============================================================================
// Enumerated type BASIC_REGISTERS_VALUES
- localparam BASIC_REGISTERS_VALUES_SIZE = 3;
+ localparam BASIC_REGISTERS_VALUES_SIZE = 5;
localparam BOARD_ID_VALUE = 'h4002; // BASIC_REGISTERS_VALUES:BOARD_ID_VALUE
+ localparam VARIANT_ID_MAX10 = 'h4D4158; // BASIC_REGISTERS_VALUES:VARIANT_ID_MAX10
+ localparam VARIANT_ID_XO3 = 'h584F33; // BASIC_REGISTERS_VALUES:VARIANT_ID_XO3
localparam OLDEST_CPLD_REVISION = 'h20110611; // BASIC_REGISTERS_VALUES:OLDEST_CPLD_REVISION
- localparam CPLD_REVISION = 'h21111614; // BASIC_REGISTERS_VALUES:CPLD_REVISION
+ localparam CPLD_REVISION = 'h22031611; // BASIC_REGISTERS_VALUES:CPLD_REVISION
// SLAVE_SIGNATURE Register (from basic_regs.v)
localparam SLAVE_SIGNATURE = 'h0; // Register Offset
@@ -73,3 +76,11 @@
localparam GIT_CLEAN_SIZE = 4; //GIT_HASH_REGISTER:GIT_CLEAN
localparam GIT_CLEAN_MSB = 31; //GIT_HASH_REGISTER:GIT_CLEAN
localparam GIT_CLEAN = 28; //GIT_HASH_REGISTER:GIT_CLEAN
+
+ // SLAVE_VARIANT Register (from basic_regs.v)
+ localparam SLAVE_VARIANT = 'h14; // Register Offset
+ localparam SLAVE_VARIANT_SIZE = 32; // register width in bits
+ localparam SLAVE_VARIANT_MASK = 32'hFFFFFFFF;
+ localparam VARIANT_REG_SIZE = 32; //SLAVE_VARIANT:VARIANT_REG
+ localparam VARIANT_REG_MSB = 31; //SLAVE_VARIANT:VARIANT_REG
+ localparam VARIANT_REG = 0; //SLAVE_VARIANT:VARIANT_REG
diff --git a/fpga/usrp3/top/x400/dboards/zbx/cpld/zbx_top_cpld.v b/fpga/usrp3/top/x400/dboards/zbx/cpld/zbx_top_cpld.v
index a688db2ff..daf676671 100644
--- a/fpga/usrp3/top/x400/dboards/zbx/cpld/zbx_top_cpld.v
+++ b/fpga/usrp3/top/x400/dboards/zbx/cpld/zbx_top_cpld.v
@@ -19,7 +19,9 @@ module zbx_top_cpld (
input wire MB_SYNTH_SYNC,
//Clk and reset for control registers
+`ifndef VARIANT_XO3
input wire CTRL_REG_CLK,
+`endif
input wire CTRL_REG_ARST,
//SPI in
@@ -66,13 +68,19 @@ module zbx_top_cpld (
input wire TX0_LO1_MUXOUT,
output wire TX0_LO1_CSB,
output wire TX0_LO1_SCK,
- output wire TX0_LO1_SDI,
output wire TX0_LO2_SYNC,
input wire TX0_LO2_MUXOUT,
output wire TX0_LO2_CSB,
output wire TX0_LO2_SCK,
+
+ // XO3 variant of this programmable drives all SDI lines from a single pin.
+`ifndef VARIANT_XO3
+ output wire TX0_LO1_SDI,
output wire TX0_LO2_SDI,
+`else
+ output wire RX_TX_LO_SDI,
+`endif
//Tx0 Switch control
output wire TX0_SW1_SW2_CTRL,
@@ -111,13 +119,16 @@ module zbx_top_cpld (
input wire TX1_LO1_MUXOUT,
output wire TX1_LO1_CSB,
output wire TX1_LO1_SCK,
- output wire TX1_LO1_SDI,
output wire TX1_LO2_SYNC,
input wire TX1_LO2_MUXOUT,
output wire TX1_LO2_CSB,
output wire TX1_LO2_SCK,
+
+`ifndef VARIANT_XO3
+ output wire TX1_LO1_SDI,
output wire TX1_LO2_SDI,
+`endif
//Tx1 Switch control
output wire TX1_SW1_SW2_CTRL,
@@ -156,13 +167,16 @@ module zbx_top_cpld (
input wire RX0_LO1_MUXOUT,
output wire RX0_LO1_CSB,
output wire RX0_LO1_SCK,
- output wire RX0_LO1_SDI,
output wire RX0_LO2_SYNC,
input wire RX0_LO2_MUXOUT,
output wire RX0_LO2_CSB,
output wire RX0_LO2_SCK,
+
+`ifndef VARIANT_XO3
+ output wire RX0_LO1_SDI,
output wire RX0_LO2_SDI,
+`endif
//Rx0 Switch control
output wire RX0_SW1_A,
@@ -198,13 +212,16 @@ module zbx_top_cpld (
input wire RX1_LO1_MUXOUT,
output wire RX1_LO1_CSB,
output wire RX1_LO1_SCK,
- output wire RX1_LO1_SDI,
output wire RX1_LO2_SYNC,
input wire RX1_LO2_MUXOUT,
output wire RX1_LO2_CSB,
output wire RX1_LO2_SCK,
+
+`ifndef VARIANT_XO3
+ output wire RX1_LO1_SDI,
output wire RX1_LO2_SDI,
+`endif
//Rx1 Switch Control
output wire RX1_SW1_A,
@@ -254,6 +271,66 @@ module zbx_top_cpld (
`include "regmap/spi_regmap_utils.vh"
`include "regmap/gpio_regmap_utils.vh"
+ // Bring pll_ref_clk enable signal to the same clock domain.
+ wire pll_ref_clk_enable_osc, pll_ref_clk_enable_prc;
+ wire pll_ref_clk;
+
+ // Clock used to drive reconfiguration register space.
+ wire config_ref_clk;
+
+
+ // Part-dependent clock generation and gating.
+`ifdef VARIANT_XO3
+
+ // Internal oscillator
+ wire clk_int_osc;
+ defparam OSCH_inst.NOM_FREQ = "66.5";
+ OSCH OSCH_inst (
+ .STDBY (1'b0), // 0=Enabled, 1=Disabled
+ .OSC (clk_int_osc),
+ .SEDSTDBY ()
+ );
+
+ wire pll_ref_clk_freerun;
+
+ DCCA pll_clk_buffer (
+ .CLKI (CPLD_REFCLK),
+ .CE (1'b1),
+ .CLKO (pll_ref_clk_freerun)
+ );
+
+ // Bring pll_ref_clk enable signal to the same clock domain.
+ synchronizer #(
+ .WIDTH (1),
+ .STAGES (2),
+ .INITIAL_VAL (1'b1),
+ .FALSE_PATH_TO_IN (1)
+ ) pll_ref_clk_enable_sync_i (
+ .clk (pll_ref_clk_freerun),
+ .rst (1'b0),
+ .in (pll_ref_clk_enable_osc),
+ .out (pll_ref_clk_enable_prc)
+ );
+
+ // PLL configure to output two clocks, both at the same frequency as the source.
+ // One clock is phase-aligned with the reference clock, while the second clock
+ // is shifted by 240 degrees. The shifted clock is used to ease timing on
+ // output signals with tight setup margins.
+ wire pll_ref_clk_adjusted;
+
+ pll pll_ref_clk_pll (
+ .CLKI(pll_ref_clk_freerun),
+ .ENCLKOP(pll_ref_clk_enable_prc),
+ .ENCLKOS(pll_ref_clk_enable_prc),
+ .CLKOP(pll_ref_clk),
+ .CLKOS(pll_ref_clk_adjusted),
+ .LOCK()
+ );
+
+ assign config_ref_clk = clk_int_osc;
+
+`else
+
// Internal oscillator
// In the used MAX10 device this oscillator produces a clock anywhere in the
// range of 55 to 116 MHz. It drives all logic required for identification and
@@ -274,8 +351,6 @@ module zbx_top_cpld (
);
// Bring pll_ref_clk enable signal to the same clock domain.
- wire pll_ref_clk_enable_osc, pll_ref_clk_enable_prc;
-
synchronizer #(
.WIDTH (1),
.STAGES (2),
@@ -290,13 +365,17 @@ module zbx_top_cpld (
// Add clock buffer with option to enable PLL reference clock during SPLL
// reconfiguration
- wire pll_ref_clk;
clkctrl pll_ref_clk_ctrl_i (
.inclk (CPLD_REFCLK),
.ena (pll_ref_clk_enable_prc),
.outclk (pll_ref_clk)
);
+ assign config_ref_clk = CTRL_REG_CLK;
+
+`endif
+
+
// Generate synchronous resets
wire ctrlport_rst_osc;
wire ctrlport_rst_prc;
@@ -315,7 +394,7 @@ module zbx_top_cpld (
);
reset_sync reset_sync_crc_i (
- .clk (CTRL_REG_CLK),
+ .clk (config_ref_clk),
.reset_in (CTRL_REG_ARST),
.reset_out (ctrlport_rst_crc)
);
@@ -375,6 +454,11 @@ module zbx_top_cpld (
ctrlport_byte_deserializer ctrlport_byte_deserializer_i (
.ctrlport_clk (pll_ref_clk),
+ `ifdef VARIANT_XO3
+ .ctrlport_clk_adjusted (pll_ref_clk_adjusted),
+ `else
+ .ctrlport_clk_adjusted (pll_ref_clk),
+ `endif
.ctrlport_rst (ctrlport_rst_prc),
.m_ctrlport_req_wr (gpio_ctrlport_req_wr),
.m_ctrlport_req_rd (gpio_ctrlport_req_rd),
@@ -420,7 +504,7 @@ module zbx_top_cpld (
// Requests targeting the reconfig engine are filtered because the reconfig
// engine clock is disabled when unused.
//
- // X--------> RECONFIG (CTRL_REG_CLK)
+ // X--------> RECONFIG (config_ref_clk)
// |
// F -------> POWER_REGS_REGMAP (clk_int_osc)
// |/
@@ -840,7 +924,7 @@ module zbx_top_cpld (
.s_ctrlport_resp_ack (reconfig_ctrlport_resp_ack_filtered_osc),
.s_ctrlport_resp_status (reconfig_ctrlport_resp_status_filtered_osc),
.s_ctrlport_resp_data (reconfig_ctrlport_resp_data_filtered_osc),
- .m_ctrlport_clk (CTRL_REG_CLK),
+ .m_ctrlport_clk (config_ref_clk),
.m_ctrlport_req_wr (reconfig_ctrlport_req_wr_crc),
.m_ctrlport_req_rd (reconfig_ctrlport_req_rd_crc),
.m_ctrlport_req_addr (reconfig_ctrlport_req_addr_crc),
@@ -1158,8 +1242,9 @@ module zbx_top_cpld (
assign ctrlport_rst_crc_n = ~ctrlport_rst_crc;
+`ifndef VARIANT_XO3
on_chip_flash flash_i (
- .clock (CTRL_REG_CLK),
+ .clock (config_ref_clk),
.avmm_csr_addr (csr_addr),
.avmm_csr_read (csr_read),
.avmm_csr_writedata (csr_writedata),
@@ -1175,13 +1260,14 @@ module zbx_top_cpld (
.avmm_data_burstcount (4'b0001),
.reset_n (ctrlport_rst_crc_n)
);
+`endif
reconfig_engine #(
.BASE_ADDRESS (RECONFIG),
.NUM_ADDRESSES (RECONFIG_SIZE),
.MEM_INIT (1)
) reconfig_engine_i (
- .ctrlport_clk (CTRL_REG_CLK),
+ .ctrlport_clk (config_ref_clk),
.ctrlport_rst (ctrlport_rst_crc),
.s_ctrlport_req_wr (reconfig_ctrlport_req_wr_crc),
.s_ctrlport_req_rd (reconfig_ctrlport_req_rd_crc),
@@ -1208,46 +1294,53 @@ module zbx_top_cpld (
// LO SPI Break-Out
/////////////////////////////////////////////////////////////////////////////
- assign TX0_LO1_SCK = lo_sclk;
+ // SDI breakout
+`ifdef VARIANT_XO3
+ assign RX_TX_LO_SDI = lo_mosi;
+`else
assign TX0_LO1_SDI = lo_mosi;
+ assign TX0_LO2_SDI = lo_mosi;
+ assign TX1_LO1_SDI = lo_mosi;
+ assign TX1_LO2_SDI = lo_mosi;
+ assign RX0_LO1_SDI = lo_mosi;
+ assign RX0_LO2_SDI = lo_mosi;
+ assign RX1_LO1_SDI = lo_mosi;
+ assign RX1_LO2_SDI = lo_mosi;
+`endif
+
+ assign TX0_LO1_SCK = lo_sclk;
assign TX0_LO1_CSB = lo_csb[TX0_LO1];
assign lo_miso[TX0_LO1] = TX0_LO1_MUXOUT;
assign TX0_LO2_SCK = lo_sclk;
- assign TX0_LO2_SDI = lo_mosi;
assign TX0_LO2_CSB = lo_csb[TX0_LO2];
assign lo_miso[TX0_LO2] = TX0_LO2_MUXOUT;
assign TX1_LO1_SCK = lo_sclk;
- assign TX1_LO1_SDI = lo_mosi;
assign TX1_LO1_CSB = lo_csb[TX1_LO1];
assign lo_miso[TX1_LO1] = TX1_LO1_MUXOUT;
assign TX1_LO2_SCK = lo_sclk;
- assign TX1_LO2_SDI = lo_mosi;
assign TX1_LO2_CSB = lo_csb[TX1_LO2];
assign lo_miso[TX1_LO2] = TX1_LO2_MUXOUT;
assign RX0_LO1_SCK = lo_sclk;
- assign RX0_LO1_SDI = lo_mosi;
assign RX0_LO1_CSB = lo_csb[RX0_LO1];
assign lo_miso[RX0_LO1] = RX0_LO1_MUXOUT;
assign RX0_LO2_SCK = lo_sclk;
- assign RX0_LO2_SDI = lo_mosi;
assign RX0_LO2_CSB = lo_csb[RX0_LO2];
assign lo_miso[RX0_LO2] = RX0_LO2_MUXOUT;
assign RX1_LO1_SCK = lo_sclk;
- assign RX1_LO1_SDI = lo_mosi;
assign RX1_LO1_CSB = lo_csb[RX1_LO1];
assign lo_miso[RX1_LO1] = RX1_LO1_MUXOUT;
assign RX1_LO2_SCK = lo_sclk;
- assign RX1_LO2_SDI = lo_mosi;
assign RX1_LO2_CSB = lo_csb[RX1_LO2];
assign lo_miso[RX1_LO2] = RX1_LO2_MUXOUT;
+
endmodule
`default_nettype wire