1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
|
#
# Copyright 2022 Ettus Research, a National Instruments Brand
#
# SPDX-License-Identifier: LGPL-3.0-or-later
#
# NOTE: All comments prefixed with a "##" will be displayed as a part of the "make help" target
##-------------------
##USRP X4xx FPGA Help
##-------------------
##Usage:
## make <Targets> <Options>
##
##Output:
## build/usrp_<product>_fpga_<image_type>.bit: Configuration bitstream with header
## build/usrp_<product>_fpga_<image_type>.dts: Device tree source file
## build/usrp_<product>_fpga_<image_type>.rpt: Build report (includes utilization and timing summary)
# Definitions
# MGT Types from x4xx_mgt_type.vh
MGT_100GbE = 5
MGT_Aurora = 3
MGT_10GbE = 2
MGT_Disabled = 0
# For a 4-lane MGT like 100GBE set QSFPx_0=MGT_100GbE and all others to
# MGT_Disabled. For a 1-lane MGT like 10GbE do not set anything for unused
# lanes. This ensures something is defined only for the lanes that are used, so
# that the TX/RX signals are connected. The presence of a define causes TX/RX
# to be declared, whereas declaring TX/RX on an unused lane will cause an error
# in bitgen for unconstrained pins after it is optimized out.
QSFP0_10GBE = QSFP0_0=$(MGT_10GbE)
QSFP0_4X10GBE = QSFP0_0=$(MGT_10GbE) QSFP0_1=$(MGT_10GbE) QSFP0_2=$(MGT_10GbE) QSFP0_3=$(MGT_10GbE)
QSFP0_100GBE = QSFP0_0=$(MGT_100GbE) QSFP0_1=$(MGT_Disabled) QSFP0_2=$(MGT_Disabled) QSFP0_3=$(MGT_Disabled)
QSFP1_10GBE = QSFP1_0=$(MGT_10GbE)
QSFP1_4X10GBE = QSFP1_0=$(MGT_10GbE) QSFP1_1=$(MGT_10GbE) QSFP1_2=$(MGT_10GbE) QSFP1_3=$(MGT_10GbE)
QSFP1_100GBE = QSFP1_0=$(MGT_100GbE) QSFP1_1=$(MGT_Disabled) QSFP1_2=$(MGT_Disabled) QSFP1_3=$(MGT_Disabled)
# Target specific variables
X410_IP: DEFS += $(QSFP0_10GBE) RFBW_100M=1
X410_X1_100: DEFS += $(QSFP0_10GBE) RFBW_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_XG_100: DEFS += $(QSFP0_10GBE) $(QSFP1_10GBE) RFBW_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4_100: DEFS += $(QSFP0_4X10GBE) RFBW_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4C_100: DEFS += $(QSFP0_4X10GBE) $(QSFP1_100GBE) RFBW_100M=1 DRAM_CH=0
X410_C1_100: DEFS += $(QSFP0_100GBE) RFBW_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_C1_200: DEFS += $(QSFP0_100GBE) RFBW_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X1_200: DEFS += $(QSFP0_10GBE) RFBW_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_XG_200: DEFS += $(QSFP0_10GBE) $(QSFP1_10GBE) RFBW_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4_200: DEFS += $(QSFP0_4X10GBE) RFBW_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4C_200: DEFS += $(QSFP0_4X10GBE) $(QSFP1_100GBE) RFBW_200M=1 DRAM_CH=0
X410_X1_400: DEFS += $(QSFP0_10GBE) RFBW_400M=1 DRAM_CH=4*$(DRAM) DRAM_W=128
X410_XG_400: DEFS += $(QSFP0_10GBE) $(QSFP1_10GBE) RFBW_400M=1 DRAM_CH=4*$(DRAM) DRAM_W=128
X410_X4_400: DEFS += $(QSFP0_4X10GBE) RFBW_400M=1 DRAM_CH=4*$(DRAM) DRAM_W=128
X410_C1_400: DEFS += $(QSFP0_100GBE) RFBW_400M=1 DRAM_CH=0
X410_CG_400: DEFS += $(QSFP0_100GBE) $(QSFP1_100GBE) RFBW_400M=1 DRAM_CH=0
# DRAM IP inclusion. Set to 1 to include DRAM memory controller in design, 0 to
# exclude it. Note that some targets exclude it regardless of this setting.
DRAM ?= 1
DEFS += $(OPTIONS)
# Defaults specific to the various targets:
X410_100_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_100_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_100_static_router.hex)
X410_200_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_200_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_200_static_router.hex)
X410_400_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_400_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_400_static_router.hex)
X410_400_128_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_400_128_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_400_128_static_router.hex)
# Option to stop after RTL elaboration. Use this flag as a synthesis check.
ifndef TARGET
ifdef CHECK
TARGET = rtl
else ifdef SYNTH
TARGET = synth
else
TARGET = bin
endif
endif
TOP ?= x4xx
# vivado_build($1=Device, $2=Definitions, $3=Defaults)
vivado_build = make -f Makefile.x4xx.inc $(TARGET) NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2" $3
vivado_ip = make -f Makefile.x4xx.inc viv_ip NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2" $3
# vivado_build($1=Device, $2=Option)
ifeq ($(TARGET),bin)
post_build = @\
mkdir -p build; \
echo "Exporting bitstream file..."; \
cp build-$(1)_$(2)/x4xx.bit build/usrp_`echo $(1) | tr A-Z a-z`_fpga_$(2).bit; \
echo "Exporting build report..."; \
cp build-$(1)_$(2)/build.rpt build/usrp_`echo $(1) | tr A-Z a-z`_fpga_$(2).rpt; \
echo "Build DONE ... $(1)_$(2)";
else
post_build = @echo "Skipping bitfile export."
endif
##
##Available Targets
##------------|-----------|-----------------|-----------------|------------
##Target | Bandwidth | QSFP0 | QSFP1 | DRAM
##------------|-----------|-----------------|-----------------|------------
##X410_X1_100 | 100 MHz | 10 GbE (Lane 0) | None | 64b x 4 Ch
##X410_XG_100 | 100 MHz | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 64b x 4 Ch
##X410_X4_100 | 100 MHz | 4 x 10 GbE | None | 64b x 4 Ch
##X410_X1_200 | 200 MHz | 10 GbE (Lane 0) | None | 64b x 4 Ch
##X410_XG_200 | 200 MHz | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 64b x 4 Ch
##X410_X4_200 | 200 MHz | 4 x 10 GbE | None | 64b x 4 Ch
##X410_X1_400 | 400 MHz | 10 GbE (Lane 0) | None | 128b x 4 Ch
##X410_XG_400 | 400 MHz | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 128b x 4 ch
##X410_X4_400 | 400 MHz | 4 x 10 GbE | None | 128b x 4 Ch
##X410_C1_400 | 400 MHz | 100 GbE | None | None
##X410_CG_400 | 400 MHz | 100 GbE | 100 GbE | None
##* Note: Not all targets are shipped with UHD
X410_X1_100: X410_IP build/usrp_x410_fpga_X1_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_100_DEFAULTS))
$(call post_build,X410,X1_100)
X410_XG_100: X410_IP build/usrp_x410_fpga_XG_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_100_DEFAULTS))
$(call post_build,X410,XG_100)
X410_X4_100: X410_IP build/usrp_x410_fpga_X4_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_100_DEFAULTS))
$(call post_build,X410,X4_100)
X410_X1_200: X410_IP build/usrp_x410_fpga_X1_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X1_200)
X410_XG_200: X410_IP build/usrp_x410_fpga_XG_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,XG_200)
X410_X4_200: X410_IP build/usrp_x410_fpga_X4_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X4_200)
X410_X1_400: X410_IP build/usrp_x410_fpga_X1_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_128_DEFAULTS))
$(call post_build,X410,X1_400)
X410_XG_400: X410_IP build/usrp_x410_fpga_XG_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_128_DEFAULTS))
$(call post_build,X410,XG_400)
X410_X4_400: X410_IP build/usrp_x410_fpga_X4_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_128_DEFAULTS))
$(call post_build,X410,X4_400)
X410_C1_400: X410_IP build/usrp_x410_fpga_C1_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_DEFAULTS))
$(call post_build,X410,C1_400)
X410_CG_400: X410_IP build/usrp_x410_fpga_CG_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_DEFAULTS))
$(call post_build,X410,CG_400)
##
##Experimental Targets
##-------------|-----------|----------------|----------------|------------
##Target | Bandwidth | QSFP0 | QSFP1 | DRAM
##-------------|-----------|----------------|----------------|------------
##X410_X4C_100 | 100 | 4 x 10 GbE | 100GbE | None
##X410_C1_100 | 100 | 100 GbE | None | 64b x 4 Ch
##X410_X4C_200 | 200 | 4 x 10 GbE | 100GbE | None
##X410_C1_200 | 200 | 100 GbE | None | 64b x 4 Ch
X410_X4C_100: X410_IP build/usrp_x410_fpga_X4C_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_100_DEFAULTS))
$(call post_build,X410,X4C_100)
X410_C1_100: X410_IP build/usrp_x410_fpga_CG_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_100_DEFAULTS))
$(call post_build,X410,CG_100)
X410_C1_200: X410_IP build/usrp_x410_fpga_CG_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,CG_200)
X410_X4C_200: X410_IP build/usrp_x410_fpga_X4C_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X4C_200)
##
##Other Make Targets
##------------------
.DEFAULT_GOAL := all
all: X410_X4_200 X410_CG_400 ##(Default targets)
X410_IP: ##Build IP only.
+$(call vivado_ip,X410,$(DEFS) X410=1)
build/%.dts: dts/*.dts dts/*.dtsi
-mkdir -p build
tools/parse_versions_for_dts.py \
--input regmap/versioning_regs_regmap_utils.vh \
--output dts/x410-version-info.dtsi \
--components fpga,cpld_ifc,db_gpio_ifc,rf_core_100m,rf_core_400m
${CC} -o $@ -C -E -I dts -nostdinc -undef -x assembler-with-cpp -D__DTS__ \
$$(python3 tools/get_dts_input.py --target $@)
clean: ##Clean up all target build outputs.
@echo "Cleaning targets..."
@rm -rf build-X4*
@rm -rf build
cleanall: ##Clean up all target and IP build outputs.
@echo "Cleaning targets and IP..."
@rm -rf build-ip
@rm -rf build-X4*
@rm -rf build
help: ##Show this help message.
@grep -h "##" Makefile | grep -v "\"##\"" | sed -e 's/\\$$//' | sed -e 's/##//'
##
##Supported Options
##-----------------
##DRAM=0 Exclude DDR4 memory controller IP from the FPGA build.
##GUI=1 Launch the build in the Vivado GUI.
##CHECK=1 Launch the syntax checker instead of building a bitfile.
##SYNTH=1 Launch the build but stop after synthesis.
##TOP=<module> Specify a top module for syntax checking. (Optional. Default is the bitfile top)
.PHONY: all clean cleanall help
|
