Merge tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "A few last minute fixes:

   - two driver fixes for samsung/google platforms, both addressing
     mistakes in changes from the 6.15 merge window

   - a revert for an allwinner devicetree change that caused problems

   - a fix for an older regression with the LEDs on Marvell Armada 3720

   - a defconfig change to enable chacha20 again after a crypto
     subsystem change in 6.15 inadventently turned it off"

* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
  arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
  Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
  soc: samsung: usi: prevent wrong bits inversion during unconfiguring
  firmware: exynos-acpm: check saved RX before bailing out on empty RX queue

7 files changed, 75 insertions, 55 deletions

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 13a0e63afeaf..2c64d834a2c4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -152,28 +152,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -291,6 +275,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index ab87c3447cd7..f005072c68a1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -176,16 +176,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -296,6 +292,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index d05dc5d6e6b9..e34dbb992021 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -113,20 +113,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -241,6 +233,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
index 3a9b6907185d..242820845707 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -26,6 +26,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_quad_pins>;
 
 		led-power1 {
 			label = "udpu:green:power";
@@ -82,8 +84,6 @@
 
 &spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -108,6 +108,10 @@
 	};
 };
 
+&spi_quad_pins {
+	function = "gpio";
+};
+
 &pinctrl_nb {
 	i2c2_recovery_pins: i2c2-recovery-pins {
 		groups = "i2c2";
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5bb8f09422a2..c4ce2c67c0e0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1729,12 +1729,12 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_CHACHA20=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_RNG=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA2_ARM64_CE=y
diff --git a/drivers/firmware/samsung/exynos-acpm.c b/drivers/firmware/samsung/exynos-acpm.c
index a85b2dbdd9f0..15e991b99f5a 100644
--- a/drivers/firmware/samsung/exynos-acpm.c
+++ b/drivers/firmware/samsung/exynos-acpm.c
@@ -185,6 +185,29 @@ struct acpm_match_data {
 #define handle_to_acpm_info(h) container_of(h, struct acpm_info, handle)
 
 /**
+ * acpm_get_saved_rx() - get the response if it was already saved.
+ * @achan:	ACPM channel info.
+ * @xfer:	reference to the transfer to get response for.
+ * @tx_seqnum:	xfer TX sequence number.
+ */
+static void acpm_get_saved_rx(struct acpm_chan *achan,
+			      const struct acpm_xfer *xfer, u32 tx_seqnum)
+{
+	const struct acpm_rx_data *rx_data = &achan->rx_data[tx_seqnum - 1];
+	u32 rx_seqnum;
+
+	if (!rx_data->response)
+		return;
+
+	rx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, rx_data->cmd[0]);
+
+	if (rx_seqnum == tx_seqnum) {
+		memcpy(xfer->rxd, rx_data->cmd, xfer->rxlen);
+		clear_bit(rx_seqnum - 1, achan->bitmap_seqnum);
+	}
+}
+
+/**
  * acpm_get_rx() - get response from RX queue.
  * @achan:	ACPM channel info.
  * @xfer:	reference to the transfer to get response for.
@@ -204,15 +227,16 @@ static int acpm_get_rx(struct acpm_chan *achan, const struct acpm_xfer *xfer)
 	rx_front = readl(achan->rx.front);
 	i = readl(achan->rx.rear);
 
-	/* Bail out if RX is empty. */
-	if (i == rx_front)
+	tx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, xfer->txd[0]);
+
+	if (i == rx_front) {
+		acpm_get_saved_rx(achan, xfer, tx_seqnum);
 		return 0;
+	}
 
 	base = achan->rx.base;
 	mlen = achan->mlen;
 
-	tx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, xfer->txd[0]);
-
 	/* Drain RX queue. */
 	do {
 		/* Read RX seqnum. */
@@ -259,16 +283,8 @@ static int acpm_get_rx(struct acpm_chan *achan, const struct acpm_xfer *xfer)
 	 * If the response was not in this iteration of the queue, check if the
 	 * RX data was previously saved.
 	 */
-	rx_data = &achan->rx_data[tx_seqnum - 1];
-	if (!rx_set && rx_data->response) {
-		rx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM,
-				      rx_data->cmd[0]);
-
-		if (rx_seqnum == tx_seqnum) {
-			memcpy(xfer->rxd, rx_data->cmd, xfer->rxlen);
-			clear_bit(rx_seqnum - 1, achan->bitmap_seqnum);
-		}
-	}
+	if (!rx_set)
+		acpm_get_saved_rx(achan, xfer, tx_seqnum);
 
 	return 0;
 }
diff --git a/drivers/soc/samsung/exynos-usi.c b/drivers/soc/samsung/exynos-usi.c
index c5661ac19f7b..5f7bdf3bab05 100644
--- a/drivers/soc/samsung/exynos-usi.c
+++ b/drivers/soc/samsung/exynos-usi.c
@@ -233,7 +233,7 @@ static void exynos_usi_unconfigure(void *data)
 	/* Make sure that we've stopped providing the clock to USI IP */
 	val = readl(usi->regs + USI_OPTION);
 	val &= ~USI_OPTION_CLKREQ_ON;
-	val |= ~USI_OPTION_CLKSTOP_ON;
+	val |= USI_OPTION_CLKSTOP_ON;
 	writel(val, usi->regs + USI_OPTION);
 
 	/* Set USI block state to reset */