diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 18:34:53 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 18:34:53 -0800 |
| commit | 82851fce6107d5a3e66d95aee2ae68860a732703 (patch) | |
| tree | 175acb6f41743c0e45355e5b8cd3ca4f02f88f60 | |
| parent | Merge tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff) | |
| parent | ARM: dts: aspeed: align GPIO hog names with dtschema (diff) | |
| download | wireguard-linux-82851fce6107d5a3e66d95aee2ae68860a732703.tar.xz wireguard-linux-82851fce6107d5a3e66d95aee2ae68860a732703.zip | |
Merge tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"After the last release contained a surprising amount of new 32-bit
machines, this time two thirds of the code changes are for 64-bit.
The usual updates to existing files include:
- Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
nomadik, stm32, Allwinner, TI Keystone
- Support for additional devices on existing machines on Renesas,
SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba
- Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
i.MX, Rockchip, ASpeed, Zynq
Only three new SoCs this time, but a number of boards across:
Renesas:
- Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)
Intel SoCFPGA:
- eASIC N5X board (N5X)
ST-Ericsson Ux500:
- Samsung GT-I9070 (Janice) phone (u8500)
TI OMAP:
- MYIR Tech Limited development board (AM335X)
Allwinner/sunxi:
- SL631 Action Camera (V3)
- PineTab Early Adopter tablet (A64)
Broadcom:
- BCM4906 networking chip
- Netgear R8000P router (BCM4906)
AMLogic:
- Hardkernel ODROID-HC4 development board (SM1)
- Beelink GS-King-X TV Box (S922X)
Qualcomm:
- Snapdragon 888 / SM8350 high-end phone SoC
- Qualcomm SDX55 5G modem as standalone SoC
- Snapdragon MTP reference board (SM8350)
- Snapdragon MTP reference board (SDX55)
- Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
- Alcatel Idol 3 phone (MSM8916)
- ASUS Zenfone 2 Laser phone (MSM8916)
- BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
- OnePlus6 phone (SDM845)
- OnePlus6T phone (SDM845)
- Alfa Network AP120C-AC access point (IPQ4018)
NXP i.MX6 (32-bit):
- Plymovent BAS base system controller for filter systems (imx6dl)
- Protonic MVT industrial touchscreen terminals (imx6dl)
- Protonic PRTI6G reference board (imx6ul)
- Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)
NXP i.MX8 (64-bit)
- Beacon i.MX8M Nano development kit (imx8mn)
- Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
- Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
- phyBOARD-Pollux-i.MX8MP (imx8mp)
- Purism Librem5 Evergreen phone (imx8mp)
- Kontron SMARC-sAL28 system-on-module(imx8mp)
Rockchip:
- NanoPi M4B Single-board computer (RK3399)
- Radxa Rock Pi E router SBC (RK3328)
ASpeed:
- Ampere Mt. Jade, a BMC for an x86 server (AST2500)
- IBM Everest, a BMC for a Power10 server (AST2600)
- Supermicro x11spi, a BMC for an ARM server (AST2500)
Zynq:
- Ebang EBAZ4205, FPGA board (Zynq-7000)
- ZynqMP zcu104 revC reference platform (ZynqMP)"
* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
ARM: dts: aspeed: align GPIO hog names with dtschema
ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
...
569 files changed, 31065 insertions, 4410 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 3341788d1096..5f6769bf45bd 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -151,6 +151,7 @@ properties: - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: + - azw,gsking-x - azw,gtking - azw,gtking-pro - hardkernel,odroid-n2 @@ -163,9 +164,10 @@ properties: - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC items: - enum: - - seirobotics,sei610 - - khadas,vim3l - hardkernel,odroid-c4 + - hardkernel,odroid-hc4 + - khadas,vim3l + - seirobotics,sei610 - const: amlogic,sm1 - description: Boards with the Amlogic Meson A1 A113L SoC diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml new file mode 100644 index 000000000000..eee7cda9f91b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: | + The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which + contains registers for various IP blocks such as pin-controller bits for + the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits. + The registers can be accessed directly when not running in "secure mode". + When "secure mode" is enabled then these registers have to be accessed + through secure monitor calls. + +properties: + compatible: + items: + - enum: + - amlogic,meson8-secbus2 + - amlogic,meson8b-secbus2 + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + secbus2: system-controller@4000 { + compatible = "amlogic,meson8-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index 5fec063d9a13..e55731f43c84 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -19,6 +19,8 @@ properties: oneOf: - description: BCM4906 based boards items: + - enum: + - netgear,r8000p - const: brcm,bcm4906 - const: brcm,bcm4908 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index f02fd10de604..26b886b20b27 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -169,6 +169,7 @@ properties: - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 + - qcom,kryo685 - qcom,scorpion enable-method: diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 34000f7fbe02..297c87f45db8 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -210,6 +210,7 @@ properties: - kiebackpeter,imx6q-tpc # K+P i.MX6 Quad TPC Board - kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module - kosagi,imx6q-novena # Kosagi Novena Dual/Quad + - kvg,vicut1q # Kverneland UT1Q board - logicpd,imx6q-logicpd - lwn,display5 # Liebherr Display5 i.MX6 Quad Board - lwn,mccmon6 # Liebherr Monitor6 i.MX6 Quad Board @@ -331,6 +332,7 @@ properties: - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board - karo,imx6qp-tx6qp # Ka-Ro electronics TX6QP-8037 Module + - kvg,vicutp # Kverneland UT1P board - prt,prtwd3 # Protonic WD3 board - wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board - zii,imx6qp-zii-rdu2 # ZII RDU2+ Board @@ -364,7 +366,12 @@ properties: - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board - karo,imx6dl-tx6dl # Ka-Ro electronics TX6U Modules - kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module + - kvg,victgo # Kverneland TGO + - kvg,vicut1 # Kverneland UT1 board + - ply,plybas # Plymovent BAS board + - ply,plym2m # Plymovent M2M board - poslab,imx6dl-savageboard # Poslab SavageBoard Dual + - prt,prtmvt # Protonic MVT board - prt,prtrvt # Protonic RVT board - prt,prtvt7 # Protonic VT7 board - rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board @@ -488,6 +495,7 @@ properties: - karo,imx6ul-tx6ul # Ka-Ro electronics TXUL-0010 Module - kontron,imx6ul-n6310-som # Kontron N6310 SOM - kontron,imx6ul-n6311-som # Kontron N6311 SOM + - prt,prti6g # Protonic PRTI6G Board - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf - technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi @@ -670,8 +678,12 @@ properties: items: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit + - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm @@ -691,6 +703,7 @@ properties: - description: i.MX8MN based Boards items: - enum: + - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - const: fsl,imx8mn @@ -707,6 +720,12 @@ properties: - fsl,imx8mp-evk # i.MX8MP EVK Board - const: fsl,imx8mp + - description: PHYTEC phyCORE-i.MX8MP SoM based boards + items: + - const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK + - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -724,6 +743,7 @@ properties: - enum: - purism,librem5r2 # Purism Librem5 phone "Chestnut" - purism,librem5r3 # Purism Librem5 phone "Dogwood" + - purism,librem5r4 # Purism Librem5 phone "Evergreen" - const: purism,librem5 - const: fsl,imx8mq @@ -834,10 +854,12 @@ properties: Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0 items: - enum: + - kontron,sl28-var1-ads2 - kontron,sl28-var2-ads2 - kontron,sl28-var3-ads2 - kontron,sl28-var4-ads2 - enum: + - kontron,sl28-var1 - kontron,sl28-var2 - kontron,sl28-var3 - kontron,sl28-var4 @@ -848,6 +870,7 @@ properties: Kontron SMARC-sAL28 board (on a generic/undefined carrier) items: - enum: + - kontron,sl28-var1 - kontron,sl28-var2 - kontron,sl28-var3 - kontron,sl28-var4 diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 53f0d4e3ea98..93b3bdf6eaeb 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -120,7 +120,9 @@ properties: - const: mediatek,mt8183 - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) items: - - const: google,krane-sku176 + - enum: + - google,krane-sku0 + - google,krane-sku176 - const: google,krane - const: mediatek,mt8183 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index c97d4a580f47..174134f920e1 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -40,7 +40,9 @@ description: | sdm630 sdm660 sdm845 + sdx55 sm8250 + sm8350 The 'board' element must be one of the following strings: @@ -169,6 +171,11 @@ properties: - items: - enum: + - qcom,sdx55-mtp + - const: qcom,sdx55 + + - items: + - enum: - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -178,6 +185,11 @@ properties: - qcom,sm8250-mtp - const: qcom,sm8250 + - items: + - enum: + - qcom,sm8350-mtp + - const: qcom,sm8350 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index fe11be65039a..5fd0696a9f91 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -130,6 +130,7 @@ properties: - description: RZ/G2N (R8A774B1) items: - enum: + - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform - const: renesas,r8a774b1 @@ -154,6 +155,7 @@ properties: - description: RZ/G2H (R8A774E1) items: - enum: + - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform - const: renesas,r8a774e1 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index ef4544ad6f82..8a2dd9f1cff2 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -467,6 +467,11 @@ properties: - const: radxa,rockpi4 - const: rockchip,rk3399 + - description: Radxa ROCK Pi E + items: + - const: radxa,rockpi-e + - const: rockchip,rk3328 + - description: Radxa ROCK Pi N8 items: - const: radxa,rockpi-n8 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 6db32fbf813f..08607c7ec1bf 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -657,7 +657,8 @@ properties: - description: Pine64 PineCube items: - const: pine64,pinecube - - const: allwinner,sun8i-s3 + - const: sochip,s3 + - const: allwinner,sun8i-v3 - description: Pine64 PineH64 model A items: @@ -683,23 +684,31 @@ properties: - description: Pine64 PinePhone Developer Batch (1.0) items: - const: pine64,pinephone-1.0 + - const: pine64,pinephone - const: allwinner,sun50i-a64 - description: Pine64 PinePhone Braveheart (1.1) items: - const: pine64,pinephone-1.1 + - const: pine64,pinephone - const: allwinner,sun50i-a64 - description: Pine64 PinePhone (1.2) items: - const: pine64,pinephone-1.2 + - const: pine64,pinephone - const: allwinner,sun50i-a64 - - description: Pine64 PineTab + - description: Pine64 PineTab, Development Sample items: - const: pine64,pinetab - const: allwinner,sun50i-a64 + - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones) + items: + - const: pine64,pinetab-early-adopter + - const: allwinner,sun50i-a64 + - description: Pine64 SoPine Baseboard items: - const: pine64,sopine-baseboard @@ -777,6 +786,12 @@ properties: - const: sinlinx,sina33 - const: allwinner,sun8i-a33 + - description: SL631 Action Camera with IMX179 + items: + - const: allwinner,sl631-imx179 + - const: allwinner,sl631 + - const: allwinner,sun8i-v3 + - description: Tanix TX6 items: - const: oranth,tanix-tx6 diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index c5fbf869aa93..b9f75e20fef5 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -120,10 +120,18 @@ properties: items: - const: nvidia,p3668-0000 - const: nvidia,tegra194 + - description: Jetson Xavier NX (eMMC) + items: + - const: nvidia,p3668-0001 + - const: nvidia,tegra194 - description: Jetson Xavier NX Developer Kit items: - const: nvidia,p3509-0000+p3668-0000 - const: nvidia,tegra194 + - description: Jetson Xavier NX Developer Kit (eMMC) + items: + - const: nvidia,p3509-0000+p3668-0001 + - const: nvidia,tegra194 - items: - enum: - nvidia,tegra234-vdk diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index e0c6787f6e94..f52c7e8ce654 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -22,6 +22,9 @@ properties: - adapteva,parallella - digilent,zynq-zybo - digilent,zynq-zybo-z7 + - ebang,ebaz4205 + - myir,zynq-zturn-v5 + - myir,zynq-zturn - xlnx,zynq-cc108 - xlnx,zynq-zc702 - xlnx,zynq-zc706 @@ -91,6 +94,7 @@ properties: items: - enum: - xlnx,zynqmp-zcu104-revA + - xlnx,zynqmp-zcu104-revC - xlnx,zynqmp-zcu104-rev1.0 - const: xlnx,zynqmp-zcu104 - const: xlnx,zynqmp @@ -107,7 +111,7 @@ properties: items: - enum: - xlnx,zynqmp-zcu111-revA - - xlnx,zynqmp-zcu11-rev1.0 + - xlnx,zynqmp-zcu111-rev1.0 - const: xlnx,zynqmp-zcu111 - const: xlnx,zynqmp diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 27fffafe5b5c..3207608d1178 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -105,26 +105,27 @@ properties: - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel - edt,et035012dm6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + - edt,et070080dh6 # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 - # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel - - edt,et057090dhu - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm070080dh6 - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm0700g0dh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same display as the ETM0700G0BDH6, but with changed hardware for the # backlight and the touch interface. - edt,etm070080edh6 + - edt,etm0700g0bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - # Same timings as the ETM0700G0DH6, but with resistive touch. - - edt,etm070080dh6 + - edt,etm0700g0dh6 + - edt,etm0700g0edh6 # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - evervision,vgg804821 # Foxlink Group 5" WVGA TFT LCD panel @@ -173,6 +174,8 @@ properties: - koe,tx26d202vm0bwa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa + # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT + - kyo,tcg070wvlq # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel - kyo,tcg121xglp # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 78456437df5f..a884955f861e 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -22,6 +22,8 @@ Required properties: * "qcom,scm-sc7180" * "qcom,scm-sdm845" * "qcom,scm-sm8150" + * "qcom,scm-sm8250" + * "qcom,scm-sm8350" and: * "qcom,scm" - clocks: Specifies clocks needed by the SCM interface, if any: diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml index 4db3b8a3332c..9cf6137dd524 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml @@ -82,8 +82,7 @@ properties: '#gpio-cells': const: 2 - gpio-ranges: - maxItems: 1 + gpio-ranges: true interrupts: true diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml index 5ccbb1f81960..e759a5da708d 100644 --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml @@ -46,10 +46,14 @@ description: | properties: compatible: - enum: - - x-powers,axp209-adc - - x-powers,axp221-adc - - x-powers,axp813-adc + oneOf: + - const: x-powers,axp209-adc + - const: x-powers,axp221-adc + - const: x-powers,axp813-adc + + - items: + - const: x-powers,axp803-adc + - const: x-powers,axp813-adc "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index 8acca0ae3129..4fd1e2780026 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -29,6 +29,9 @@ properties: - items: - const: allwinner,sun8i-a83t-r-intc - const: allwinner,sun6i-a31-r-intc + - items: + - const: allwinner,sun8i-v3s-nmi + - const: allwinner,sun9i-a80-nmi - const: allwinner,sun9i-a80-nmi - items: - const: allwinner,sun50i-a64-r-intc diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 6a56214c6cfd..b80980b1908e 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -20,6 +20,9 @@ properties: oneOf: - const: allwinner,sun8i-h3-deinterlace - items: + - const: allwinner,sun8i-r40-deinterlace + - const: allwinner,sun8i-h3-deinterlace + - items: - const: allwinner,sun50i-a64-deinterlace - const: allwinner,sun8i-h3-deinterlace diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml index 49bff738aca5..52eab686a177 100644 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -23,6 +23,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + port: type: object additionalProperties: false @@ -75,6 +78,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/power/marvell,mmp2.h> camera@d420a000 { compatible = "marvell,mmp2-ccic"; @@ -84,6 +88,7 @@ examples: clock-names = "axi"; #clock-cells = <0>; clock-output-names = "mclk"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; port { camera0_0: endpoint { diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index 37c2a601c3fa..b1b0ee769b71 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -128,7 +128,6 @@ required: - compatible - reg - interrupts - - clocks - clock-output-names additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml new file mode 100644 index 000000000000..effcc72f9425 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Series SoC + +maintainers: + - Alice Guo <alice.guo@nxp.com> + +description: | + NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be + obtained. + +select: + properties: + compatible: + contains: + enum: + - fsl,imx8mm + - fsl,imx8mn + - fsl,imx8mp + - fsl,imx8mq + required: + - compatible + +patternProperties: + "^soc@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - enum: + - fsl,imx8mm-soc + - fsl,imx8mn-soc + - fsl,imx8mp-soc + - fsl,imx8mq-soc + - const: simple-bus + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + dma-ranges: true + + nvmem-cells: + maxItems: 1 + description: Phandle to the SOC Unique ID provided by a nvmem node + + nvmem-cell-names: + const: soc_unique_id + + required: + - compatible + - nvmem-cells + - nvmem-cell-names + + additionalProperties: + type: object + +additionalProperties: true + +examples: + - | + / { + model = "FSL i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + #address-cells = <2>; + #size-cells = <2>; + + soc@0 { + compatible = "fsl,imx8mm-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mm_uid>; + nvmem-cell-names = "soc_unique_id"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt deleted file mode 100644 index 16b734ad3102..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt +++ /dev/null @@ -1,25 +0,0 @@ -Xilinx Zynq QSPI controller Device Tree Bindings -------------------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,zynq-qspi-1.0". -- reg : Physical base address and size of QSPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - -Example: - qspi: spi@e000d000 { - compatible = "xlnx,zynq-qspi-1.0"; - reg = <0xe000d000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <0 19 4>; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 10>, <&clkc 43>; - num-cs = <1>; - }; diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml new file mode 100644 index 000000000000..1f1c40a9f320 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq QSPI controller + +description: + The Xilinx Zynq QSPI controller is used to access multi-bit serial flash + memory devices. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +# Everything else is described in the common file +properties: + compatible: + const: xlnx,zynq-qspi-1.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: reference clock + - description: peripheral clock + + clock-names: + items: + - const: ref_clk + - const: pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + spi@e000d000 { + compatible = "xlnx,zynq-qspi-1.0"; + reg = <0xe000d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 19 4>; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 10>, <&clkc 43>; + num-cs = <1>; + }; diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 19d116ff9ddc..6d65771e979c 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -72,6 +72,8 @@ patternProperties: - allwinner,sun4i-a10-sram-d - allwinner,sun9i-a80-smp-sram - allwinner,sun50i-a64-sram-c + - amlogic,meson8-ao-arc-sram + - amlogic,meson8b-ao-arc-sram - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram - amlogic,meson-gxbb-scp-shmem diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 2cf525d21e05..fd93b941f07a 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -17,6 +17,7 @@ properties: - qcom,msm8998-dwc3 - qcom,sc7180-dwc3 - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 - const: qcom,dwc3 reg: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 041ae90b0d8f..3b2958202258 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -59,6 +59,8 @@ patternProperties: description: Aeroflex Gaisler AB "^al,.*": description: Annapurna Labs + "^alcatel,.*": + description: Alcatel "^allegro,.*": description: Allegro DVT "^allo,.*": @@ -311,6 +313,8 @@ patternProperties: description: Dyna-Image "^ea,.*": description: Embedded Artists AB + "^ebang,.*": + description: Zhejiang Ebang Communication Co., Ltd "^ebs-systart,.*": description: EBS-SYSTART GmbH "^ebv,.*": @@ -467,10 +471,10 @@ patternProperties: description: Hitex Development Tools "^holt,.*": description: Holt Integrated Circuits, Inc. - "^honeywell,.*": - description: Honeywell "^honestar,.*": description: Honestar Technologies Co., Ltd. + "^honeywell,.*": + description: Honeywell "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": @@ -581,6 +585,8 @@ patternProperties: description: Kontron S&T AG "^kosagi,.*": description: Sutajio Ko-Usagi PTE Ltd. + "^kvg,.*": + description: Kverneland Group "^kyo,.*": description: Kyocera Corporation "^lacie,.*": @@ -866,6 +872,8 @@ patternProperties: description: PLDA "^plx,.*": description: Broadcom Corporation (formerly PLX Technology) + "^ply,.*": + description: Plymovent Group BV "^pni,.*": description: PNI Sensor Corporation "^pocketbook,.*": diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 8e3760a3822b..b8e4118945a0 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -18,6 +18,7 @@ properties: - qcom,apss-wdt-qcs404 - qcom,apss-wdt-sc7180 - qcom,apss-wdt-sdm845 + - qcom,apss-wdt-sdx55 - qcom,apss-wdt-sm8150 - qcom,kpss-timer - qcom,kpss-wdt diff --git a/MAINTAINERS b/MAINTAINERS index e6b425a5cb33..f70e9ce88368 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2607,9 +2607,11 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git F: Documentation/devicetree/bindings/arm/toshiba.yaml F: Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml F: Documentation/devicetree/bindings/pinctrl/toshiba,tmpv7700-pinctrl.yaml +F: Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml F: arch/arm64/boot/dts/toshiba/ F: drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c F: drivers/pinctrl/visconti/ +F: drivers/watchdog/visconti_wdt.c N: visconti ARM/UNIPHIER ARCHITECTURE @@ -2697,6 +2699,7 @@ W: http://wiki.xilinx.com T: git https://github.com/Xilinx/linux-xlnx.git F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml +F: Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml F: arch/arm/mach-zynq/ F: drivers/block/xsysace.c F: drivers/clocksource/timer-cadence-ttc.c diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6d8abff55238..8e5d4ab4e75e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -459,6 +459,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-pico-hobbit.dtb \ imx6dl-pico-nymph.dtb \ imx6dl-pico-pi.dtb \ + imx6dl-plybas.dtb \ + imx6dl-plym2m.dtb \ + imx6dl-prtmvt.dtb \ imx6dl-prtrvt.dtb \ imx6dl-prtvt7.dtb \ imx6dl-rex-basic.dtb \ @@ -481,6 +484,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-tx6u-811x.dtb \ imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ + imx6dl-victgo.dtb \ + imx6dl-vicut1.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ imx6dl-wandboard-revd1.dtb \ @@ -574,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-udoo.dtb \ imx6q-utilite-pro.dtb \ imx6q-var-dt6customboard.dtb \ + imx6q-vicut1.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ @@ -588,6 +594,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-tx6qp-8037-mb7.dtb \ imx6qp-tx6qp-8137.dtb \ imx6qp-tx6qp-8137-mb7.dtb \ + imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -625,6 +632,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-pico-pi.dtb \ imx6ul-phytec-segin-ff-rdk-emmc.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ + imx6ul-prti6g.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ @@ -811,6 +819,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-lxm.dtb \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ + am335x-myirtech-myd.dtb \ am335x-nano.dtb \ am335x-netcan-plus-1xx.dtb \ am335x-netcom-plus-2xx.dtb \ @@ -901,6 +910,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-ap120c-ac-bit.dtb \ + qcom-ipq4018-jalapeno.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c3.dtb \ @@ -916,7 +928,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-amami.dtb \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ - qcom-mdm9615-wp8548-mangoh-green.dtb + qcom-mdm9615-wp8548-mangoh-green.dtb \ + qcom-sdx55-mtp.dtb dtb-$(CONFIG_ARCH_RDA) += \ rda8810pl-orangepi-2g-iot.dtb \ rda8810pl-orangepi-i96.dtb @@ -1213,6 +1226,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ + sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v40-bananapi-m2-berry.dtb @@ -1263,6 +1277,7 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefv60plus-tvk.dtb \ ste-href520-tvk.dtb \ ste-ux500-samsung-golden.dtb \ + ste-ux500-samsung-janice.dtb \ ste-ux500-samsung-skomer.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld4-ref.dtb \ @@ -1292,6 +1307,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-cc108.dtb \ + zynq-ebaz4205.dtb \ zynq-microzed.dtb \ zynq-parallella.dtb \ zynq-zc702.dtb \ @@ -1387,6 +1403,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ + aspeed-bmc-ampere-mtjade.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-bytedance-g220a.dtb \ @@ -1399,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ + aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ aspeed-bmc-intel-s2600wf.dtb \ @@ -1418,4 +1436,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ - aspeed-bmc-quanta-q71l.dtb + aspeed-bmc-quanta-q71l.dtb \ + aspeed-bmc-supermicro-x11spi.dtb diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 7c6f2c11f0e1..902e295b309e 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -684,28 +684,31 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; - slaves = <1>; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index b43b94122d3c..d5f8d5e2eb5d 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -596,19 +596,17 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; @@ -619,16 +617,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index b958ab56a412..e923d065304d 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -474,31 +474,29 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rmii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rmii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; - dual_emac; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; reset-delay-us = <2>; /* PHY datasheet states 1uS min */ diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi new file mode 100644 index 000000000000..270a3d5e8f98 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ + +/* Based on code by myc_c335x.dts, MYiRtech.com */ +/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */ + +/dts-v1/; + +#include "am33xx.dtsi" + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "MYIR MYC-AM335X"; + compatible = "myir,myc-am335x", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd_core>; + voltage-tolerance = <2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + vdd_mod: vdd_mod_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd-mod"; + regulator-always-on; + regulator-boot-on; + }; + + vdd_core: vdd_core_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd-core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mod>; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_mod_pins>; + + led_mod: led_mod { + label = "module:user"; + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + panic-indicator; + }; + }; +}; + +&cpsw_emac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdio_pins_default>; + pinctrl-1 = <&mdio_pins_sleep>; + status = "okay"; + + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&nand_pins_default>; + pinctrl-1 = <&nand_pins_sleep>; + ranges = <0 0 0x8000000 0x1000000>; + status = "okay"; + + nand0: nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE_NONE>; + nand-bus-width = <8>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + ti,elm-id = <&elm>; + ti,nand-ecc-opt = "bch8"; + + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default", "gpio", "sleep"; + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_gpio>; + pinctrl-2 = <&i2c0_pins_sleep>; + clock-frequency = <400000>; + scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&vdd_mod>; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_slave1_pins_default>; + pinctrl-1 = <ð_slave1_pins_sleep>; + slaves = <1>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; + +&am33xx_pinmux { + mdio_pins_default: pinmux_mdio_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk */ + >; + }; + + mdio_pins_sleep: pinmux_mdio_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + eth_slave1_pins_default: pinmux_eth_slave1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd0 */ + >; + }; + + eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + i2c0_pins_default: pinmux_i2c0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SDA */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SCL */ + >; + }; + + i2c0_pins_gpio: pinmux_i2c0_pins_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7) /* gpio3[5] */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7) /* gpio3[6] */ + >; + }; + + i2c0_pins_sleep: pinmux_i2c0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + led_mod_pins: pinmux_led_mod_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpio3[18] */ + >; + }; + + nand_pins_default: pinmux_nand_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio0[31] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle */ + >; + }; + + nand_pins_sleep: pinmux_nand_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts new file mode 100644 index 000000000000..c996639874e6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ +/* Based on code by myd_c335x.dts, MYiRtech.com */ +/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */ + +/dts-v1/; + +#include "am335x-myirtech-myc.dtsi" + +#include <dt-bindings/display/tda998x.h> +#include <dt-bindings/input/input.h> + +/ { + model = "MYIR MYD-AM335X"; + compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + }; + + clk12m: clk12m { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + + #clock-cells = <0>; + }; + + gpio_buttons: gpio_buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_buttons_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button1: button@0 { + reg = <0>; + label = "button1"; + linux,code = <BTN_1>; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + button2: button@1 { + reg = <1>; + label = "button2"; + linux,code = <BTN_2>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&master_codec>; + simple-audio-card,frame-master = <&master_codec>; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + master_codec: simple-audio-card,codec@1 { + sound-dai = <&sgtl5000>; + }; + + simple-audio-card,codec@2 { + sound-dai = <&tda9988>; + }; + }; + + vdd_5v0: vdd_5v0_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3: vdd_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v0>; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&davinci_mdio { + phy1: ethernet-phy@6 { + reg = <6>; + eee-broken-1000t; + }; +}; + +&dcan0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan0_pins_default>; + pinctrl-1 = <&dcan0_pins_sleep>; + status = "okay"; +}; + +&dcan1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan1_pins_default>; + pinctrl-1 = <&dcan1_pins_sleep>; + status = "okay"; +}; + +&ehrpwm0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ehrpwm0_pins_default>; + pinctrl-1 = <&ehrpwm0_pins_sleep>; + status = "okay"; +}; + +&epwmss0 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio", "sleep"; + pinctrl-0 = <&i2c1_pins_default>; + pinctrl-1 = <&i2c1_pins_gpio>; + pinctrl-2 = <&i2c1_pins_sleep>; + clock-frequency = <400000>; + scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + sgtl5000: sgtl5000@a { + compatible = "fsl,sgtl5000"; + reg =<0xa>; + clocks = <&clk12m>; + micbias-resistor-k-ohms = <4>; + micbias-voltage-m-volts = <2250>; + VDDA-supply = <&vdd_3v3>; + VDDIO-supply = <&vdd_3v3>; + + #sound-dai-cells = <0>; + }; + + tda9988: tda9988@70 { + compatible = "nxp,tda998x"; + reg =<0x70>; + audio-ports = <TDA998x_I2S 1>; + + #sound-dai-cells = <0>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&lcdc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcdc_pins_default>; + pinctrl-1 = <&lcdc_pins_sleep>; + blue-and-red-wiring = "straight"; + status = "okay"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&leds { + pinctrl-0 = <&led_mod_pins &leds_pins>; + + led1: led1 { + label = "base:user1"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; + + led2: led2 { + label = "base:user2"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; +}; + +&mac { + pinctrl-0 = <ð_slave1_pins_default>, <ð_slave2_pins_default>; + pinctrl-1 = <ð_slave1_pins_sleep>, <ð_slave2_pins_sleep>; + slaves = <2>; +}; + +&mcasp0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp0_pins_default>; + pinctrl-1 = <&mcasp0_pins_sleep>; + op-mode = <0>; + tdm-slots = <2>; + serial-dir = <0 1 2 0>; + tx-num-evt = <32>; + rx-num-evt = <32>; + status = "okay"; + + #sound-dai-cells = <0>; +}; + +&mmc1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&vdd_3v3>; + status = "okay"; +}; + +&nand0 { + partition@0 { + label = "MLO"; + reg = <0x00000 0x20000>; + }; + + partition@20000 { + label = "boot"; + reg = <0x20000 0x80000>; + }; +}; + +&tscadc { + status = "okay"; + + adc: adc { + ti,adc-channels = <0 1 2 3 4 5 6>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins_default>; + pinctrl-1 = <&uart1_pins_sleep>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_pins_default>; + pinctrl-1 = <&uart2_pins_sleep>; + status = "okay"; +}; + +&usb { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; +}; + +&usb0 { + dr_mode = "otg"; +}; + +&usb0_phy { + vcc-supply = <&vdd_5v0>; +}; + +&usb1 { + dr_mode = "host"; +}; + +&usb1_phy { + vcc-supply = <&vdd_5v0>; +}; + +&vdd_mod { + vin-supply = <&vdd_3v3>; +}; + +&am33xx_pinmux { + dcan0_pins_default: pinmux_dcan0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan0_tx_mux2 */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) /* dcan0_rx_mux2 */ + >; + }; + + dcan0_pins_sleep: pinmux_dcan0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + dcan1_pins_default: pinmux_dcan1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan1_tx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* dcan1_rx_mux0 */ + >; + }; + + dcan1_pins_sleep: pinmux_dcan1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3) /* ehrpwm0A_mux1 */ + >; + }; + + ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + eth_slave2_pins_default: pinmux_eth_slave2_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd1 */) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd0 */) + >; + }; + + eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + gpio_buttons_pins: pinmux_gpio_buttons_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpio3[0] */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7) /* gpio0[29] */ + >; + }; + + i2c1_pins_default: pinmux_i2c1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SDA_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SCL_mux3 */ + >; + }; + + i2c1_pins_gpio: pinmux_i2c1_pins_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7) /* gpio0[4] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7) /* gpio0[5] */ + >; + }; + + i2c1_pins_sleep: pinmux_i2c1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + lcdc_pins_default: pinmux_lcdc_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) /* lcd_data0 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) /* lcd_data1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) /* lcd_data2 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) /* lcd_data3 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) /* lcd_data4 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) /* lcd_data5 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) /* lcd_data6 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) /* lcd_data7 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) /* lcd_data8 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) /* lcd_data9 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) /* lcd_data10 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) /* lcd_data11 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) /* lcd_data12 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) /* lcd_data13 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) /* lcd_data14 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) /* lcd_data15 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_vsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_hsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) /* lcd_pclk */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + + lcdc_pins_sleep: pinmux_lcdc_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* gpio0[27] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7) /* gpio0[3] */ + >; + }; + + mcasp0_pins_default: pinmux_mcasp0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_aclkx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_fsx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mcasp0_axr2_mux0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_axr1_mux0 */ + >; + }; + + mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio3[21] */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart0_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart0_txd */ + >; + }; + + uart1_pins_default: pinmux_uart1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart1_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart1_txd */ + >; + }; + + uart1_pins_sleep: pinmux_uart1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + uart2_pins_default: pinmux_uart2_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6) /* uart2_rxd_mux1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6) /* uart2_txd_mux1 */ + >; + }; + + uart2_pins_sleep: pinmux_uart2_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + usb_pins: pinmux_usb_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB0_DRVVBUS */ + AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 78088506d25b..1fb22088caeb 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -765,6 +765,55 @@ phys = <&phy_gmii_sel 2 1>; }; }; + + mac_sw: switch@0 { + compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + + interrupts = <40 41 42 43>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 1>; + }; + }; + + davinci_mdio_sw: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpts { + clocks = <&cpsw_cpts_rft_clk>; + clock-names = "cpts"; + }; + }; }; target-module@180000 { /* 0x4a180000, ap 5 10.0 */ diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 37758761cd88..1b8f3a28af05 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -39,3 +39,7 @@ &m_can0 { status = "disabled"; }; + +&emif1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 827e82be2201..fb9c8a0b241c 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -148,6 +148,8 @@ reg = <0>; label = "pxa3xx_nand-0"; nand-rb = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; marvell,nand-keep-config; nand-on-flash-bbt; }; diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index b3728de3bd3f..ec134e22bae3 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -70,6 +70,9 @@ system-leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&helios_system_led_pins>; + status-led { label = "helios4:green:status"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; @@ -86,6 +89,9 @@ io-leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&helios_io_led_pins>; + sata1-led { label = "helios4:green:ata1"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; @@ -121,11 +127,15 @@ fan1: j10-pwm { compatible = "pwm-fan"; pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */ + pinctrl-names = "default"; + pinctrl-0 = <&helios_fan1_pins>; }; fan2: j17-pwm { compatible = "pwm-fan"; pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */ + pinctrl-names = "default"; + pinctrl-0 = <&helios_fan2_pins>; }; usb2_phy: usb2-phy { @@ -286,16 +296,22 @@ "mpp39", "mpp40"; marvell,function = "sd0"; }; - helios_led_pins: helios-led-pins { - marvell,pins = "mpp24", "mpp25", - "mpp49", "mpp50", + helios_system_led_pins: helios-system-led-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "gpio"; + }; + helios_io_led_pins: helios-io-led-pins { + marvell,pins = "mpp49", "mpp50", "mpp52", "mpp53", "mpp54"; marvell,function = "gpio"; }; - helios_fan_pins: helios-fan-pins { - marvell,pins = "mpp41", "mpp43", - "mpp48", "mpp55"; + helios_fan1_pins: helios_fan1_pins { + marvell,pins = "mpp41", "mpp43"; + marvell,function = "gpio"; + }; + helios_fan2_pins: helios_fan2_pins { + marvell,pins = "mpp48", "mpp55"; marvell,function = "gpio"; }; microsom_spi1_cs_pins: spi1-cs-pins { diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 89be13197780..2772796e215e 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -237,3 +237,11 @@ &fsim0 { status = "okay"; }; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 96ff0aea64e5..ac2d04cfaf2f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -218,7 +218,7 @@ &lpc_snoop { status = "okay"; - snoop-ports = <0x80>; + snoop-ports = <0x80>, <0x81>; }; &lpc_ctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts new file mode 100644 index 000000000000..8f5ec22e51c2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jade BMC"; + compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + shutdown_ack { + label = "SHUTDOWN_ACK"; + gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 2)>; + }; + + reboot_ack { + label = "REBOOT_ACK"; + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 3)>; + }; + + S0_overtemp { + label = "S0_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 3)>; + }; + + S0_hightemp { + label = "S0_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 0)>; + }; + + S0_cpu_fault { + label = "S0_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(J, 1)>; + }; + + S1_overtemp { + label = "S1_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 6)>; + }; + + S1_hightemp { + label = "S1_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(AB, 0)>; + }; + + S1_cpu_fault { + label = "S1_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(Z, 1)>; + }; + + id_button { + label = "ID_BUTTON"; + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 5)>; + }; + + }; + + gpioA0mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>; + }; + + adc0mux: adc0mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc1mux: adc1mux { + compatible = "io-channel-mux"; + io-channels = <&adc 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc2mux: adc2mux { + compatible = "io-channel-mux"; + io-channels = <&adc 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc3mux: adc3mux { + compatible = "io-channel-mux"; + io-channels = <&adc 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc4mux: adc4mux { + compatible = "io-channel-mux"; + io-channels = <&adc 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc5mux: adc5mux { + compatible = "io-channel-mux"; + io-channels = <&adc 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc6mux: adc6mux { + compatible = "io-channel-mux"; + io-channels = <&adc 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc7mux: adc7mux { + compatible = "io-channel-mux"; + io-channels = <&adc 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc8mux: adc8mux { + compatible = "io-channel-mux"; + io-channels = <&adc 8>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc9mux: adc9mux { + compatible = "io-channel-mux"; + io-channels = <&adc 9>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc10mux: adc10mux { + compatible = "io-channel-mux"; + io-channels = <&adc 10>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc11mux: adc11mux { + compatible = "io-channel-mux"; + io-channels = <&adc 11>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc12mux: adc12mux { + compatible = "io-channel-mux"; + io-channels = <&adc 12>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc13mux: adc13mux { + compatible = "io-channel-mux"; + io-channels = <&adc 13>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0mux 0>, <&adc0mux 1>, + <&adc1mux 0>, <&adc1mux 1>, + <&adc2mux 0>, <&adc2mux 1>, + <&adc3mux 0>, <&adc3mux 1>, + <&adc4mux 0>, <&adc4mux 1>, + <&adc5mux 0>, <&adc5mux 1>, + <&adc6mux 0>, <&adc6mux 1>, + <&adc7mux 0>, <&adc7mux 1>, + <&adc8mux 0>, <&adc8mux 1>, + <&adc9mux 0>, <&adc9mux 1>, + <&adc10mux 0>, <&adc10mux 1>, + <&adc11mux 0>, <&adc11mux 1>, + <&adc12mux 0>, <&adc12mux 1>, + <&adc13mux 0>, <&adc13mux 1>; + }; + + iio-hwmon-adc14 { + compatible = "iio-hwmon"; + io-channels = <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + /* spi-max-frequency = <50000000>; */ +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + /* spi-max-frequency = <100000000>; */ + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_nrts1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* The BMC's uart */ +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + eeprom@50 { + compatible = "microchip,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + inlet_mem2: tmp175@28 { + compatible = "ti,tmp175"; + reg = <0x28>; + }; + + inlet_cpu: tmp175@29 { + compatible = "ti,tmp175"; + reg = <0x29>; + }; + + inlet_mem1: tmp175@2a { + compatible = "ti,tmp175"; + reg = <0x2a>; + }; + + outlet_cpu: tmp175@2b { + compatible = "ti,tmp175"; + reg = <0x2b>; + }; + + outlet1: tmp175@2c { + compatible = "ti,tmp175"; + reg = <0x2c>; + }; + + outlet2: tmp175@2d { + compatible = "ti,tmp175"; + reg = <0x2d>; + }; +}; + +&i2c4 { + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@1 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@5 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@6 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@7 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@8 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@9 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@10 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@11 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; + +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","", + /*B0-B7*/ "BMC_SELECT_EEPROM","","","", + "POWER_BUTTON","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", + "S1_DDR_SAVE","","", + /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", + "","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", + /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", + "","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","UID_BUTTON","","", + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","", + "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR", + "S1_BMC_DDR_ADR","","","","", + /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", + "BMC_OCP_PG"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts index 2feb25b0e43b..5ef88c377358 100644 --- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -446,7 +446,11 @@ &i2c4 { status = "okay"; - + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &i2c5 { @@ -901,14 +905,14 @@ &gpio { pin_gpio_i3 { gpio-hog; - gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; output-low; line-name = "NCSI_BMC_R_SEL"; }; pin_gpio_b6 { gpio-hog; - gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; output-low; line-name = "EN_NCSI_SWITCH_N"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts new file mode 100644 index 000000000000..6bd876657bb8 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -0,0 +1,775 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Everest"; + compatible = "ibm,everest-bmc", "aspeed,ast2600"; + + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + i2c300 = &cfam2_i2c0; + i2c301 = &cfam2_i2c1; + i2c310 = &cfam2_i2c10; + i2c311 = &cfam2_i2c11; + i2c312 = &cfam2_i2c12; + i2c313 = &cfam2_i2c13; + i2c314 = &cfam2_i2c14; + i2c315 = &cfam2_i2c15; + i2c402 = &cfam3_i2c2; + i2c403 = &cfam3_i2c3; + i2c410 = &cfam3_i2c10; + i2c411 = &cfam3_i2c11; + i2c414 = &cfam3_i2c14; + i2c415 = &cfam3_i2c15; + i2c416 = &cfam3_i2c16; + i2c417 = &cfam3_i2c17; + + serial4 = &uart5; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + spi30 = &cfam2_spi0; + spi31 = &cfam2_spi1; + spi32 = &cfam2_spi2; + spi33 = &cfam2_spi3; + spi40 = &cfam3_spi0; + spi41 = &cfam3_spi1; + spi42 = &cfam3_spi2; + spi43 = &cfam3_spi3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b8000000 { + no-map; + reg = <0xb8000000 0x04000000>; /* 64M */ + }; + + /* 48MB region from the end of flash to start of vga memory */ + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; +}; + +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + /* + * CFAM Reset is supposed to be active low but pass1 hardware is wired + * active high. + */ + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@2,0 { + reg = <2 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <2>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + }; + + cfam2_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + }; + + cfam2_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam2_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam2_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam2_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam2_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam2_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ2: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub2: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@3,0 { + reg = <3 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <3>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + }; + + cfam3_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + }; + + cfam3_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam3_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam3_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam3_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam3_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam3_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ3: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub3: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +&fsi_occ2 { + reg = <3>; +}; + +&fsi_occ3 { + reg = <4>; +}; + +&ibt { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&kcs4 { + compatible = "openbmc,mctp-lpc"; + status = "okay"; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index a4b77aec5424..6c9804d2f3b4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -195,6 +195,7 @@ &emmc { status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; }; &fsim0 { @@ -579,7 +580,7 @@ gpio-controller; #gpio-cells = <2>; - smbus0 { + smbus0-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 62a3ab4c1866..07593897fc9a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -204,6 +204,39 @@ }; +&gpio { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","front-psu","checkstop","cfam-reset","","","init-ok", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "ps0-presence","ps1-presence","","","front-memory","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","front-fan","","","", + /*I0-I7*/ "front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","power","trans-gpios","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","identify", + /*AA0-AA7*/ "clock-gpios","","data-gpios","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &fmc { status = "okay"; @@ -756,12 +789,12 @@ status = "okay"; power-supply@58 { - compatible = "pmbus"; + compatible = "inspur,ipsps1"; reg = <0x58>; }; power-supply@59 { - compatible = "pmbus"; + compatible = "inspur,ipsps1"; reg = <0x59>; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index cb85168f6761..577c211c469e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -827,7 +827,7 @@ gpio-controller; #gpio-cells = <2>; - smbus0 { + smbus0-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -852,7 +852,7 @@ gpio-controller; #gpio-cells = <2>; - smbus1 { + smbus1-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -900,7 +900,7 @@ gpio-controller; #gpio-cells = <2>; - smbus2 { + smbus2-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -925,7 +925,7 @@ gpio-controller; #gpio-cells = <2>; - smbus3 { + smbus3-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -992,7 +992,7 @@ gpio-controller; #gpio-cells = <2>; - smbus4 { + smbus4-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -1017,7 +1017,7 @@ gpio-controller; #gpio-cells = <2>; - smbus5 { + smbus5-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -1065,7 +1065,7 @@ gpio-controller; #gpio-cells = <2>; - smbus6 { + smbus6-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -1090,7 +1090,7 @@ gpio-controller; #gpio-cells = <2>; - smbus7 { + smbus7-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts index b648e468e9db..8503152faaf0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts @@ -582,6 +582,11 @@ /* TMP275A */ /* TMP275A */ + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + tmp275@48 { compatible = "ti,tmp275"; reg = <0x48>; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 4a1ca8f5b6a7..03c161493ffc 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -121,6 +121,8 @@ pca9555@27 { compatible = "nxp,pca9555"; reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts new file mode 100644 index 000000000000..bc16ad2b5c80 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Super Micro Computer, Inc + +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "X11SPI BMC"; + compatible = "supermicro,x11spi-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@7f000000 { + no-map; + reg = <0x7f000000 0x01000000>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + +}; + +&gpio { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index b3dafbc8caca..e7a45ba18fc9 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -375,6 +375,7 @@ compatible = "aspeed,ast2400-lpc-snoop"; reg = <0x10 0x8>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 5bc0de0f3365..21930521a986 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -497,6 +497,7 @@ compatible = "aspeed,ast2500-lpc-snoop"; reg = <0x10 0x8>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 810b0676ab03..3ee470c2b7b5 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -524,6 +524,7 @@ compatible = "aspeed,ast2600-lpc-snoop"; reg = <0x0 0x80>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 9ce513dd514b..c4b3750495da 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -341,7 +341,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 0e159f879c15..84e1180f3e89 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -142,7 +142,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index a06700e53e4c..025a78310e3a 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -43,14 +43,20 @@ &i2c0 { pinctrl-0 = <&pinctrl_i2c0_default>; - pinctrl-names = "default"; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + pinctrl-names = "default", "gpio"; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c1 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; mcp16502@5b { @@ -258,12 +264,24 @@ bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PD19__TWD1>, <PIN_PD20__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD19__GPIO>, + <PIN_PD20__GPIO>; + bias-disable; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 6b38fa3f5568..180a08765cb8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -209,7 +209,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6783cf16ff81..46722a163184 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -697,7 +697,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index c894c7c788a9..8de57d164acd 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -206,7 +206,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 058fae1b4a76..4e7cf21f124c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -351,7 +351,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 58ec1b2f8ef6..cc58f2b926b9 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -27,7 +27,7 @@ bootargs = "console=ttyS0,115200n8"; }; - cpus { + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 403bacf986eb..3b4ab947492a 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -25,6 +25,7 @@ emmc2bus = &emmc2bus; ethernet0 = &genet; pcie0 = &pcie0; + blconfig = &blconfig; }; leds { @@ -218,6 +219,22 @@ status = "okay"; }; +&rmem { + /* + * RPi4's co-processor will copy the board's bootloader configuration + * into memory for the OS to consume. It'll also update this node with + * its placement information. + */ + blconfig: nvram@0 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x0>; + no-map; + status = "disabled"; + }; +}; + /* SDHCI is used to control the SDIO for wireless */ &sdhci { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 4847dd305317..462b1dfb0385 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,6 +308,22 @@ #reset-cells = <1>; }; + bsc_intr: interrupt-controller@7ef00040 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7ef00040 0x30>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + aon_intr: interrupt-controller@7ef00100 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7ef00100 0x30>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + hdmi0: hdmi@7ef00700 { compatible = "brcm,bcm2711-hdmi0"; reg = <0x7ef00700 0x300>, @@ -330,6 +346,11 @@ "hd"; clock-names = "hdmi", "bvb", "audio", "cec"; resets = <&dvp 0>; + interrupt-parent = <&aon_intr>; + interrupts = <0>, <1>, <2>, + <3>, <4>, <5>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; ddc = <&ddc0>; dmas = <&dma 10>; dma-names = "audio-rx"; @@ -341,6 +362,8 @@ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; + interrupt-parent = <&bsc_intr>; + interrupts = <0>; status = "disabled"; }; @@ -367,6 +390,11 @@ ddc = <&ddc1>; clock-names = "hdmi", "bvb", "audio", "cec"; resets = <&dvp 1>; + interrupt-parent = <&aon_intr>; + interrupts = <8>, <7>, <6>, + <9>, <10>, <11>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; dmas = <&dma 17>; dma-names = "audio-rx"; status = "disabled"; @@ -377,6 +405,8 @@ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; + interrupt-parent = <&bsc_intr>; + interrupts = <1>; status = "disabled"; }; }; @@ -540,6 +570,7 @@ &dsi1 { interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + compatible = "brcm,bcm2711-dsi1"; }; &gpio { diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 6194857f8a02..1114c592e461 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -191,7 +191,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -209,7 +209,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -227,7 +227,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -245,7 +245,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -446,7 +446,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; }; }; @@ -461,7 +461,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 56fa951bc86f..c1d91424e658 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -34,19 +34,19 @@ linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */ }; - leds { + led-controller { compatible = "pwm-leds"; pinctrl-0 = <&ledpwm_pmux>; pinctrl-names = "default"; - white { + led-1 { label = "white"; pwms = <&pwm 0 600000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - red { + led-2 { label = "red"; pwms = <&pwm 1 600000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 6f30d7eb3b41..b2768f7a3185 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -181,7 +181,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -199,7 +199,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -217,7 +217,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -235,7 +235,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -473,7 +473,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; }; }; @@ -518,7 +518,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index b6a0acac6836..598a46f96a82 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -252,7 +252,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -270,7 +270,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -288,7 +288,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -306,7 +306,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -552,7 +552,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; @@ -613,7 +613,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index cad58f733bd6..6d2cca6b4488 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -112,6 +112,8 @@ regulator-name = "lp8733-ldo0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; lp8733_ldo1_reg: ldo1 { diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 2f326151116b..a09e7bd77fc7 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -9,6 +9,13 @@ compatible = "ti,dra762", "ti,dra7"; ocp { + emif1: emif@4c000000 { + compatible = "ti,emif-dra7xx"; + reg = <0x4c000000 0x200>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + target-module@42c01900 { compatible = "ti,sysc-dra7-mcan", "ti,sysc"; ranges = <0x0 0x42c00000 0x2000>; @@ -133,3 +140,32 @@ /* dra76x is not affected by i887 */ max-frequency = <96000000>; }; + +&cpu0_opp_table { + opp_plus@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000 950000 1250000>, + <1250000 950000 1250000>; + opp-supported-hw = <0xFF 0x08>; + }; +}; + +&opp_supply_mpu { + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + 1250000 0xC + >; +}; + +&abb_mpu { + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1160000 0 0x4 0 0x02000000 0x01F00000 + 1210000 0 0x8 0 0x02000000 0x01F00000 + 1250000 0 0xC 0 0x02000000 0x01F00000 + >; +}; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index 3af1ab4458ef..cfb239d5186a 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -278,6 +278,12 @@ }; &uart1 { + /* J4, through-hole */ + status = "okay"; +}; + +&uart4 { + /* TP198, next to J4, SMD pads */ status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 04290ec4583a..829c05b2c405 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -79,7 +79,7 @@ pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; - interrupts = <5 IRQ_TYPE_NONE>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps14_irq>; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 69451566945d..fae046e08a5d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -200,7 +200,7 @@ pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index a26e3e582a7e..d64ccf4b7d32 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -270,7 +270,7 @@ pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index a0c3bab382ae..304a8ee2364c 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -560,27 +560,33 @@ regulator-boot-on; }; - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; regulator-always-on; }; - chargercv_reg: CHARGER_CV { - regulator-name = "CHARGER_CV"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <4100000>; + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; regulator-always-on; }; - EN32KHZ_AP { - regulator-name = "EN32KHZ_AP"; + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <950000>; + }; + + chargercv_reg: CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; regulator-always-on; }; - EN32KHZ_CP { - regulator-name = "EN32KHZ_CP"; + CHARGER_TOPOFF { + regulator-name = "CHARGER_TOPOFF"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 9d2baea62d0d..fba1462b19df 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -109,7 +109,7 @@ compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index bf457d0c02eb..1aad4859c5f1 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -349,7 +349,7 @@ reg = <0x66>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index d0df560eb0db..6d690b1db099 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -509,7 +509,7 @@ samsung,s2mps11-acokb-ground; interrupt-parent = <&gpx0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index fe9d34c23374..2ddb7a5f12b3 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -188,7 +188,7 @@ compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy 1>; + phys = <&usb2_phy 0>; phy-names = "host"; }; @@ -196,12 +196,12 @@ compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy 1>; + phys = <&usb2_phy 0>; phy-names = "host"; }; usb2_phy: phy@12130000 { - compatible = "samsung,exynos5250-usb2-phy"; + compatible = "samsung,exynos5420-usb2-phy"; reg = <0x12130000 0x100>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -948,6 +948,16 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + usb1_pins_b: usb1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_PWM2__USB1_OVERCURRENT + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + usb0_id_pins_a: usb0id@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 665d63765cdc..d9de9b4f0c52 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -238,7 +238,6 @@ compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts new file mode 100644 index 000000000000..333c306aa946 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6dl.dtsi" + +/ { + model = "Plymovent BAS board"; + compatible = "ply,plybas", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@20 { + label = "START"; + linux,code = <31>; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + }; + + button@21 { + label = "CLEAN"; + linux,code = <46>; + gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "debug1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "light_tower1"; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-3 { + label = "light_tower2"; + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + label = "light_tower3"; + gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + label = "light_tower4"; + gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "", "", "", "", "", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "", "", + "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI", + "IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2", + "IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD", + "IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "", + "IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5", + "IMX6_IN6", "IMX6_IN7", "IMX6_IN8", + "IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 20>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG_0 */ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + /* DEBUG_1 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + + /* LED1 (lighttower) */ + MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x13070 + /* LED2 (lighttower) */ + MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x13070 + /* LED3 (lighttower) */ + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x13070 + /* LED4 (lighttower) */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x13070 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x130b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts new file mode 100644 index 000000000000..4d0d3d3386af --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6dl.dtsi" + +/ { + model = "Plymovent M2M board"; + compatible = "ply,plym2m", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 1000>; + num-interpolated-steps = <20>; + default-brightness-level = <19>; + power-supply = <®_12v0>; + }; + + display { + compatible = "fsl,imx-parallel-display"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel { + compatible = "edt,etm0700g0bdh6"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; + pinctrl-0 = <&pinctrl_tsc2046>; + pinctrl-names ="default"; + spi-max-frequency = <100000>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-max-pressure = <4095>; + + ti,vref-delay-usecs = /bits/ 16 <100>; + ti,x-plate-ohms = /bits/ 16 <800>; + ti,y-plate-ohms = /bits/ 16 <300>; + + wakeup-source; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "", "", "", "", "", "", + "DEBUG_0", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "ETH_RESET", "ETH_INTRP", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x10000 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x3008 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x3008 + /* CS */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */ + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_tsc2046: tsc2046grp { + fsl,pins = < + /* TSC_PENIRQ */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 + /* TSC_BUSY */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts new file mode 100644 index 000000000000..a35a1c66e770 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/display/sdtv-standards.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/tvp5150.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6dl.dtsi" + +/ { + model = "Protonic MVT board"; + compatible = "prt,prtmvt", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + f1 { + label = "GPIO Key F1"; + linux,code = <KEY_F1>; + gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; + }; + + f2 { + label = "GPIO Key F2"; + linux,code = <KEY_F2>; + gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; + }; + + f3 { + label = "GPIO Key F3"; + linux,code = <KEY_F3>; + gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; + }; + + f4 { + label = "GPIO Key F4"; + linux,code = <KEY_F4>; + gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; + }; + + f5 { + label = "GPIO Key F5"; + linux,code = <KEY_F5>; + gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; + }; + + cycle { + label = "GPIO Key CYCLE"; + linux,code = <KEY_CYCLEWINDOWS>; + gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; + }; + + esc { + label = "GPIO Key ESC"; + linux,code = <KEY_ESC>; + gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; + }; + + up { + label = "GPIO Key UP"; + linux,code = <KEY_UP>; + gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = <KEY_DOWN>; + gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; + }; + + ok { + label = "GPIO Key OK"; + linux,code = <KEY_OK>; + gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; + }; + + f6 { + label = "GPIO Key F6"; + linux,code = <KEY_F6>; + gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; + }; + + f7 { + label = "GPIO Key F7"; + linux,code = <KEY_F7>; + gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; + }; + + f8 { + label = "GPIO Key F8"; + linux,code = <KEY_F8>; + gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; + }; + + f9 { + label = "GPIO Key F9"; + linux,code = <KEY_F9>; + gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; + }; + + f10 { + label = "GPIO Key F10"; + linux,code = <KEY_F10>; + gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; + }; + + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "debug1"; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-2 { + label = "power_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + panel { + compatible = "kyo,tcg070wvlq", "lg,lb070wv8"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <3000>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", + "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "", "", "", "", + "CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN", + "BL_PWM", "ETH_INTRP", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + video@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; + + gpio_pca: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9539>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* CAM1_MIRROR */ + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 + /* CAM2_MIRROR */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 + /* CAM_nDETECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* ISB_IN1 */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 + /* ISB_nIN2 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + /* WARN_LIGHT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 + /* ON2_FB */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 + /* YACO_nIRQ */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + /* YACO_BOOT0 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 + /* YACO_nRESET */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + /* FORCE_ON1 */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + + /* New in HW revision 1 */ + /* ON1_FB */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 + /* DIP1_FB */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG0 */ + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 + /* DEBUG1 */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 + /* POWER_LED */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + >; + }; + + pinctrl_pca9539: pca9539 { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + /* YaCO Touchscreen UART */ + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts new file mode 100644 index 000000000000..d37ba4ed847d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/display/sdtv-standards.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/tvp5150.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6dl.dtsi" + +/ { + model = "Kverneland TGO"; + compatible = "kvg,victgo", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + enter { + label = "Rotary Key"; + gpios = <&gpio2 05 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "debug1"; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-2 { + label = "power_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-0 = <&pinctrl_rotary_ch>; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>, + <&gpio2 4 GPIO_ACTIVE_HIGH>; + linux,axis = <REL_WHEEL>; + rotary-encoder,steps-per-period = <4>; + rotary-encoder,relative-axis; + rotary-encoder,rollover; + wakeup-source; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + spi-max-frequency = <200000>; + interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>; + pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-y; + touchscreen-max-pressure = <4095>; + ti,vref-delay-usecs = /bits/ 16 <100>; + ti,x-plate-ohms = /bits/ 16 <800>; + ti,y-plate-ohms = /bits/ 16 <300>; + wakeup-source; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", + "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", + "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INTRP", "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", + "ECSPI2_SS0", "ECSPI2_SCLK", "", "", + "", "", "", "", "", "", "", "", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + video-decoder@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; + + keypad@70 { + compatible = "holtek,ht16k33"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keypad>; + reg = <0x70>; + refresh-rate-hz = <20>; + debounce-delay-ms = <50>; + interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + keypad,num-rows = <12>; + keypad,num-columns = <3>; + linux,keymap = < + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(3, 0, KEY_F8) + MATRIX_KEY(4, 0, KEY_F10) + MATRIX_KEY(5, 0, KEY_F4) + MATRIX_KEY(6, 0, KEY_F2) + MATRIX_KEY(2, 1, KEY_F5) + MATRIX_KEY(3, 1, KEY_F7) + MATRIX_KEY(4, 1, KEY_F9) + MATRIX_KEY(5, 1, KEY_F3) + MATRIX_KEY(6, 1, KEY_F1) + >; + }; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* ROTARY_BTN */ + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* CAM1_MIRROR */ + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 + /* CAM2_MIRROR */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 + /* CAM_nDETECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* ISB_IN1 */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 + /* ISB_nIN2 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + /* WARN_LIGHT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 + /* ON2_FB */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 + /* YACO_nIRQ */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + /* YACO_BOOT0 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 + /* YACO_nRESET */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + /* FORCE_ON1 */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 is shared with PWM3 */ + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + + /* New in HW revision 1 */ + /* ON1_FB */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 + /* DIP1_FB */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + + pinctrl_keypad: keypadgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG0 */ + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 + /* DEBUG1 */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 + /* POWER_LED */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_rotary_ch: rotarychgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0 + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + /* YaCO Touchscreen UART */ + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts new file mode 100644 index 000000000000..174fd913bf96 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-vicut1.dtsi" + +/ { + model = "Kverneland UT1 Board"; + compatible = "kvg,vicut1", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts new file mode 100644 index 000000000000..0a4e251be162 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-vicut1.dtsi" + +/ { + model = "Kverneland UT1Q Board"; + compatible = "kvg,vicut1q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 5277e3903291..8d209c1b3ca7 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -406,19 +406,21 @@ &hdmi { compatible = "fsl,imx6q-hdmi"; - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - hdmi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_hdmi>; + hdmi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_hdmi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - hdmi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_hdmi>; + hdmi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_hdmi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index afe477f32984..5e58740d40c5 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -298,6 +298,7 @@ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; + fsl,magic-packet; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index 7e4e5fd0143a..0ad8ccde0cf8 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -69,11 +69,13 @@ ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; + qca,smarteee-tw-us-1g = <24>; }; ethernet-phy@4 { reg = <4>; qca,clk-out-frequency = <125000000>; + qca,smarteee-tw-us-1g = <24>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi new file mode 100644 index 000000000000..eb25d21a2ace --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +#include <dt-bindings/display/sdtv-standards.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/tvp5150.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "LED_DI0_DEBUG_0"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "LED_DI0_DEBUG_1"; + function = LED_FUNCTION_DISK; + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-2 { + label = "POWER_LED"; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + regulator-name = "wifi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <70000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */ + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3", + "SDIO_D2", "SDIO_D1", "SDIO_D0", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "", "", + "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "", + "WL_IRQ", "ETH_MDC"; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "", "ON_SWITCH", + "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", + "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "", + "", "", "", "", "BL_EN", "BL_PWM", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS", + "PCIE_RESET", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&gpio7 { + gpio-line-names = + "EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0", + "EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3", + "EMMC_RST", "", "", "", "CAM_DETECT", "", "", "", + "", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + video-decoder@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_wifi>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + no-1-8-v; + no-mmc; + no-sd; + status = "okay"; + + wifi { + compatible = "ti,wl1271"; + interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = "38400000"; + tcxo-clock-frequency = "19200000"; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* CAM1_MIRROR */ + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 + /* CAM2_MIRROR */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 + /* CAM_nDETECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + /* ISB_IN1 */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 + /* ISB_nIN2 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + /* WARN_LIGHT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 + /* ON2_FB */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 + /* YACO_nIRQ */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + /* YACO_BOOT0 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 + /* YACO_nRESET */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + /* FORCE_ON1 */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + + /* New in HW revision 1 */ + /* ON1_FB */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 + /* DIP1_FB */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + + /* New in UT2: FIXME: ISB PWM should start off, PD */ + /* ISB_LED_PWM */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG0 */ + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 + /* DEBUG1 */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 + /* POWER_LED */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; + + /* YaCO Touchscreen UART */ + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + /* WL12xx IRQ */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_wifi_npd: wifinpdgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index c0a76202e16b..525ff62b47f5 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -112,17 +112,17 @@ sound1 { compatible = "simple-audio-card"; - simple-audio-card,name = "Front"; + simple-audio-card,name = "front"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound1_codec>; simple-audio-card,frame-master = <&sound1_codec>; simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT", - "LEFTIN", "HPL", - "RIGHTIN", "HPR"; + "Headphone Jack", "HPA1 HPLEFT", + "Headphone Jack", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; simple-audio-card,aux-devs = <&hpa1>; sound1_cpu: simple-audio-card,cpu { @@ -137,17 +137,17 @@ sound2 { compatible = "simple-audio-card"; - simple-audio-card,name = "Back"; + simple-audio-card,name = "periph"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound2_codec>; simple-audio-card,frame-master = <&sound2_codec>; simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT", - "LEFTIN", "HPL", - "RIGHTIN", "HPR"; + "Headphone Jack", "HPA1 HPLEFT", + "Headphone Jack", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; simple-audio-card,aux-devs = <&hpa2>; sound2_cpu: simple-audio-card,cpu { @@ -399,6 +399,7 @@ reg = <0x60>; power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_5p0v_main>; + sound-name-prefix = "HPA1"; }; edp-bridge@68 { @@ -598,6 +599,8 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; + syna,delta-x-threshold = <5>; + syna,delta-y-threshold = <10>; }; rmi4-f12@12 { @@ -626,7 +629,7 @@ pinctrl-0 = <&pinctrl_ucs1002_pins>; reg = <0x32>; interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, - <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; + <&gpio3 21 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "a_det", "alert"; }; @@ -637,6 +640,7 @@ reg = <0x60>; power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_5p0v_main>; + sound-name-prefix = "HPA1"; }; }; @@ -885,10 +889,6 @@ }; }; -&wdog1 { - status = "disabled"; -}; - &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < @@ -988,22 +988,22 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b811 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b811 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b811 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b811 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b811 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b811 >; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 6f59a99cbe82..82e01ce026ea 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -182,8 +182,6 @@ }; hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; reg = <0x00120000 0x9000>; interrupts = <0 115 0x04>; gpr = <&gpr>; @@ -192,19 +190,24 @@ clock-names = "iahb", "isfr"; status = "disabled"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts new file mode 100644 index 000000000000..7bad7ca6b12e --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-vicut1.dtsi" + +/ { + model = "Kverneland UT1P Board"; + compatible = "kvg,vicutp", "fsl,imx6qp"; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index caa279608803..6ea5f918d059 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -340,7 +340,6 @@ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 - MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 >; }; @@ -396,7 +395,14 @@ pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 >; }; @@ -543,11 +549,19 @@ }; &uart1 { + /* J4, through-holes */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; +&uart4 { + /* TP198, next to J4, SMD pads */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts index 27143ea0f0f1..e3f1e8d79528 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts @@ -94,7 +94,6 @@ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 - MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 >; }; @@ -156,7 +155,14 @@ pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 >; }; @@ -300,6 +306,11 @@ pinctrl-0 = <&pinctrl_uart1>; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts index 7214d1c98249..90b32f5eb529 100644 --- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts @@ -104,7 +104,6 @@ MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79 - MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79 >; }; @@ -170,6 +169,13 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x1b0b1 + MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x1b0b1 + >; + }; + pinctrl_usbotg1: usbotg1grp { fsl,pins = < MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 @@ -302,6 +308,11 @@ pinctrl-0 = <&pinctrl_uart1>; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 1351d7f70a54..c6e85e4a0883 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -206,6 +206,7 @@ phy-mode = "rgmii-id"; phy-handle = <ðphy1>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + fsl,magic-packet; status = "okay"; mdio { @@ -227,6 +228,7 @@ pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii-id"; phy-handle = <ðphy2>; + fsl,magic-packet; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 64c2d1e9f7fc..c593597b2119 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -101,7 +101,7 @@ status = "okay"; gpio-sck = <&gpio5 11 0>; gpio-mosi = <&gpio5 10 0>; - cs-gpios = <&gpio5 7 0>; + cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; @@ -113,6 +113,7 @@ reg = <0>; registers-number = <1>; spi-max-frequency = <100000>; + enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; }; }; @@ -145,6 +146,41 @@ reg = <0x1a>; wlf,shared-lrclk; }; + + camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_camera_clock>; + clocks = <&clks IMX6UL_CLK_CSI>; + clock-names = "xclk"; + powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>; + + port { + ov5640_to_parallel: endpoint { + remote-endpoint = <¶llel_from_ov5640>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; +}; + +&csi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi1>; + status = "okay"; + + port { + parallel_from_ov5640: endpoint { + remote-endpoint = <&ov5640_to_parallel>; + bus-type = <5>; /* Parallel bus */ + }; + }; }; &fec1 { @@ -169,17 +205,26 @@ #size-cells = <0>; ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1560"; reg = <2>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; + reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100>; + }; ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1560"; reg = <1>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; + reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100>; }; }; }; @@ -343,9 +388,14 @@ &iomuxc { pinctrl-names = "default"; - pinctrl_csi1: csi1grp { + pinctrl_camera_clock: cameraclockgrp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts new file mode 100644 index 000000000000..d62015701d0a --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Protonic PRTI6G Board"; + compatible = "prt,prti6g", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + clock_ksz8081_in: clock-ksz8081-in { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_ksz8081_out: clock-ksz8081-out { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v2: regulator-3v2 { + compatible = "regulator-fixed"; + regulator-name = "3v2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth1>; + phy-mode = "rmii"; + phy-handle = <&rmii_phy>; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clock_ksz8081_out>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + clocks = <&clock_ksz8081_in>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3v2>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + /* SR */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + /* TERM */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + /* nSMBALERT */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + /* SR */ + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x0b0b0 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x000b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x0b0b0 + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x0b0b0 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x000b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x0b0b0 + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x0b0b0 + >; + }; + + pinctrl_eth1: eth1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x100b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x1b000 + /* PHY ENET1_RST */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x00880 + /* PHY ENET1_IRQ */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x00880 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* HW revision detect */ + /* REV_ID0 */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 + /* REV_ID2 */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 + /* BOARD_ID0 */ + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 + /* BOARD_ID1 */ + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 + /* BOARD_ID2 */ + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 + /* BOARD_ID3 */ + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 + /* Safety controller IO */ + /* WAKE_SC */ + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 + /* PROGRAM_SC */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1 + /* SD1 CD */ + MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x170b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 9d3411cc597b..afeec01f6522 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -538,6 +538,7 @@ fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; + fsl,magic-packet; status = "disabled"; }; @@ -885,6 +886,7 @@ fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; + fsl,magic-packet; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 251007a7b836..a22d41e0cf31 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -151,6 +151,7 @@ timer { compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 2d94faf31fab..b8f152e7af7f 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -52,7 +52,7 @@ usb: usb@2680000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - dwc3@2690000 { + usb@2690000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; }; }; @@ -78,8 +78,8 @@ dma-ranges; status = "disabled"; - usb1: dwc3@25010000 { - compatible = "synopsys,dwc3"; + usb1: usb@25010000 { + compatible = "snps,dwc3"; reg = <0x25010000 0x70000>; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; usb-phy = <&usb1_phy>, <&usb1_phy>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c298675a29a5..fc9fdc857ae8 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -217,8 +217,8 @@ dma-ranges; status = "disabled"; - usb0: dwc3@2690000 { - compatible = "synopsys,dwc3"; + usb0: usb@2690000 { + compatible = "snps,dwc3"; reg = <0x2690000 0x70000>; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; usb-phy = <&usb_phy>, <&usb_phy>; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 7649dd1e0b9e..8bae6ed0abb2 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -11,6 +11,11 @@ #size-cells = <1>; interrupt-parent = <&gic>; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -195,6 +200,13 @@ #size-cells = <1>; ranges = <0x0 0xc8100000 0x100000>; + ao_arc_rproc: remoteproc@1c { + compatible= "amlogic,meson-mx-ao-arc"; + reg = <0x1c 0x8>, <0x38 0x8>; + reg-names = "remap", "cpu"; + status = "disabled"; + }; + ir_receiver: ir-receiver@480 { compatible= "amlogic,meson6-ir"; reg = <0x480 0x20>; @@ -293,6 +305,13 @@ }; }; + thermal_sensor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&saradc 8>; + io-channel-names = "sensor-channel"; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 04688e8abce2..157a950a55d3 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/power/meson8-power.h> #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> +#include <dt-bindings/thermal/thermal.h> #include "meson.dtsi" / { @@ -28,6 +29,7 @@ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu1: cpu@201 { @@ -39,6 +41,7 @@ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu2: cpu@202 { @@ -50,6 +53,7 @@ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu3: cpu@203 { @@ -61,6 +65,7 @@ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -190,6 +195,54 @@ }; }; + thermal-zones { + soc { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermal_sensor>; + + cooling-maps { + map0 { + trip = <&soc_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&soc_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + soc_passive: soc-passive { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + soc_hot: soc-hot { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + soc_critical: soc-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + }; + mmcbus: bus@c8000000 { compatible = "simple-bus"; reg = <0xc8000000 0x8000>; @@ -254,6 +307,7 @@ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; }; /* end of / */ @@ -315,6 +369,14 @@ }; }; +&ao_arc_rproc { + compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + amlogic,secbus2 = <&secbus2>; + sram = <&ao_arc_sram>; + resets = <&reset RESET_MEDIA_CPU>; + clocks = <&clkc CLKID_AO_MEDIA_CPU>; +}; + &cbus { reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; @@ -442,6 +504,12 @@ }; &ahb_sram { + ao_arc_sram: ao-arc-sram@0 { + compatible = "amlogic,meson8-ao-arc-sram"; + reg = <0x0 0x8000>; + pool; + }; + smp-sram@1ff80 { compatible = "amlogic,meson8-smp-sram"; reg = <0x1ff80 0x8>; @@ -577,6 +645,13 @@ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; }; +&secbus { + secbus2: system-controller@4000 { + compatible = "amlogic,meson8-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; +}; + &sdio { compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index ed06102a4014..8e48ccc6b634 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -70,11 +70,6 @@ timeout-ms = <20000>; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index 33037ef62d0a..f3937d55472d 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -27,11 +27,6 @@ reg = <0x40000000 0x40000000>; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - vcck: regulator-vcck { compatible = "pwm-regulator"; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 5963566dbcc9..c440ef94e082 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -85,11 +85,6 @@ 1800000 1>; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - rtc32k_xtal: rtc32k-xtal-clk { /* X3 in the schematics */ compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 2401cdf5f751..c02b03cbcdf4 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/power/meson8-power.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> +#include <dt-bindings/thermal/thermal.h> #include "meson.dtsi" / { @@ -26,6 +27,7 @@ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu1: cpu@201 { @@ -37,6 +39,7 @@ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu2: cpu@202 { @@ -48,6 +51,7 @@ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu3: cpu@203 { @@ -59,6 +63,7 @@ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -167,6 +172,54 @@ }; }; + thermal-zones { + soc { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermal_sensor>; + + cooling-maps { + map0 { + trip = <&soc_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&soc_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + soc_passive: soc-passive { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + soc_hot: soc-hot { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + soc_critical: soc-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + }; + mmcbus: bus@c8000000 { compatible = "simple-bus"; reg = <0xc8000000 0x8000>; @@ -221,6 +274,7 @@ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; }; /* end of / */ @@ -266,6 +320,14 @@ }; }; +&ao_arc_rproc { + compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc"; + amlogic,secbus2 = <&secbus2>; + sram = <&ao_arc_sram>; + resets = <&reset RESET_MEDIA_CPU>; + clocks = <&clkc CLKID_AO_MEDIA_CPU>; +}; + &cbus { reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; @@ -410,6 +472,12 @@ }; &ahb_sram { + ao_arc_sram: ao-arc-sram@0 { + compatible = "amlogic,meson8b-ao-arc-sram"; + reg = <0x0 0x8000>; + pool; + }; + smp-sram@1ff80 { compatible = "amlogic,meson8b-smp-sram"; reg = <0x1ff80 0x8>; @@ -574,6 +642,13 @@ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; }; +&secbus { + secbus2: system-controller@4000 { + compatible = "amlogic,meson8b-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; +}; + &sdio { compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index 8f4eb1ed4581..fa6d55f1cfb9 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -45,11 +45,6 @@ }; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index 342304f5653a..55ea87870af3 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -2,7 +2,7 @@ /* * OLPC XO 1.75 Laptop. * - * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> + * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk> */ /dts-v1/; @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/marvell,mmp2-audio.h> / { model = "OLPC XO-1.75"; @@ -32,8 +33,7 @@ }; }; - memory { - linux,usable-memory = <0x0 0x1f800000>; + memory@0 { available = <0xcf000 0x1ef31000 0x1000 0xbf000>; reg = <0x0 0x20000000>; device_type = "memory"; @@ -195,7 +195,7 @@ port { rt5631_0: endpoint { mclk-fs = <256>; - clocks = <&audio_clk 0>; + clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>; remote-endpoint = <&sspa0_0>; }; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 445bdcd50b9e..46984d4c5224 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/marvell,mmp2.h> #include <dt-bindings/power/marvell,mmp2.h> +#include <dt-bindings/clock/marvell,mmp2-audio.h> / { #address-cells = <1>; @@ -243,7 +244,7 @@ interrupts = <2>; clock-names = "audio", "bitclk"; clocks = <&soc_clocks MMP2_CLK_AUDIO>, - <&audio_clk 1>; + <&audio_clk MMP2_CLK_AUDIO_SSPA0>; power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; #sound-dai-cells = <0>; status = "disabled"; @@ -256,7 +257,7 @@ interrupts = <3>; clock-names = "audio", "bitclk"; clocks = <&soc_clocks MMP2_CLK_AUDIO>, - <&audio_clk 2>; + <&audio_clk MMP2_CLK_AUDIO_SSPA1>; power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; #sound-dai-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts index fe3b1cd695ee..fe6df364a9eb 100644 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -26,11 +26,21 @@ }; memory@0 { - linux,usable-memory = <0x0 0x7f600000>; available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>; reg = <0x0 0x80000000>; device_type = "memory"; }; + + ec_input_spi: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + num-chipselects = <0>; + sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + }; }; &uart3 { @@ -96,6 +106,15 @@ &twsi4 { status = "okay"; + + embedded-controller@58 { + compatible = "dell,wyse-ariel-ec", "ene,kb3930"; + reg = <0x58>; + system-power-controller; + + off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>, + <&gpio 127 GPIO_ACTIVE_HIGH>; + }; }; &ssp1 { @@ -110,9 +129,17 @@ }; }; -&ssp2 { - cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; +&ec_input_spi { status = "okay"; + cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + + power-button@0 { + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <60 IRQ_TYPE_EDGE_RISING>; + compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input"; + spi-max-frequency = <33000000>; + }; }; &gpu_2d { diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 4ae630d37d09..a4fb9203ec1f 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -293,7 +293,8 @@ camera0: camera@d420a000 { compatible = "marvell,mmp2-ccic"; reg = <0xd420a000 0x800>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <1>; + interrupt-parent = <&ci_mux>; clocks = <&soc_clocks MMP2_CLK_CCIC0>; clock-names = "axi"; power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; @@ -305,7 +306,8 @@ camera1: camera@d420a800 { compatible = "marvell,mmp2-ccic"; reg = <0xd420a800 0x800>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <2>; + interrupt-parent = <&ci_mux>; clocks = <&soc_clocks MMP2_CLK_CCIC1>; clock-names = "axi"; power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; @@ -567,7 +569,7 @@ soc_clocks: clocks@d4050000 { compatible = "marvell,mmp3-clock"; - reg = <0xd4050000 0x1000>, + reg = <0xd4050000 0x2000>, <0xd4282800 0x400>, <0xd4015000 0x1000>; reg-names = "mpmu", "apmu", "apbc"; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index f75806d0cd47..a4423ff0df39 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -169,6 +169,29 @@ }; }; +&cpu_thermal { + polling-delay = <10000>; /* milliseconds */ +}; + +&cpu_alert0 { + temperature = <80000>; /* millicelsius */ +}; + +&cpu0 { + /* + * Note that the 1.2GiHz mode is enabled for all SoC variants for + * the Motorola Android Linux v3.0.8 based kernel. + */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + 1200000 1375000 + >; +}; + &dss { status = "okay"; }; diff --git a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi new file mode 100644 index 000000000000..507ff2fba837 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + vcc_core: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_core"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + }; + + vcc_dram: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc_dram"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + vcc_io: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpio MSC313_GPIO_SR_IO16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "activity"; + }; + yellow { + gpios = <&gpio MSC313_GPIO_SR_IO17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cpu0 { + cpu-supply = <&vcc_core>; +}; diff --git a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts index f9db2ff86f2d..db4910dcb8a7 100644 --- a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts +++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "mstar-infinity-msc313.dtsi" +#include "mstar-infinity-breadbee-common.dtsi" / { model = "BreadBee Crust"; diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts index f0eda80a95cc..e64ca4ce1830 100644 --- a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts +++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "mstar-infinity3-msc313e.dtsi" +#include "mstar-infinity-breadbee-common.dtsi" / { model = "BreadBee"; diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts index 93ffeddada1e..b9fd113979f2 100644 --- a/arch/arm/boot/dts/omap3-echo.dts +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -86,6 +86,38 @@ linux,axis = <REL_X>; rotary-encoder,relative-axis; }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* gpio_129 */ + sound-name-prefix = "Speaker Amp"; + VCC-supply = <&vcc1v8>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Misto Speaker"; + simple-audio-card,widgets = + "Speaker", "Speaker"; + simple-audio-card,routing = + "Speaker Amp INL", "HPL", + "Speaker Amp INR", "HPR", + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,aux-devs = <&speaker_amp>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp2>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&codec0>; + system-clock-frequency = <19200000>; + }; + }; }; &i2c1 { @@ -96,6 +128,13 @@ }; }; +&mcbsp2 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + &i2c2 { clock-frequency = <400000>; @@ -277,6 +316,22 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + + codec0: codec@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&sys_clkout1>; + clock-names = "mclk"; + ldoin-supply = <&vcc1v8>; + iov-supply = <&vcc1v8>; + reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; /* gpio_74 */ + }; +}; + + #include "tps65910.dtsi" &omap3_pmx_core { @@ -290,6 +345,9 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* dss_data4.gpio_74 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* dss_data15.gpio_85 */ + OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0) /* sys_clkout1.sys_clkout1 */ >; }; @@ -318,6 +376,15 @@ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ >; }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7b8c18e6605e..938cc691bb2f 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -488,8 +488,8 @@ }; twl_power: power { - compatible = "ti,twl4030-power"; - ti,use_poweroff; + compatible = "ti,twl4030-power-idle"; + ti,system-power-controller; }; }; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 5de2be9bbe6f..99f5585097a1 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -2,7 +2,7 @@ /* * Common device tree for IGEP boards based on AM/DM37x * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index af8aa5f0feb7..73d8f471b9ec 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -2,7 +2,7 @@ /* * Common Device Tree Source for IGEPv2 * - * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 567232584f08..9dca5bfc87ab 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index e341535a7162..c6f863bc03ad 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 71b0ae807ecd..742e3e147063 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -2,7 +2,7 @@ /* * Common Device Tree Source for IGEP COM MODULE * - * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index df6ba1219830..8e9c12cf51a7 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * - * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 32f31035daa2..5188f96f431e 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 05fe5ed127b0..20844dbc002e 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -72,7 +72,6 @@ <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; - turbo-mode; }; }; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index cb309743de5d..8466161197ae 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -33,10 +33,12 @@ }; ocp { + /* 4430 has only gpio_86 tshut and no talert interrupt */ bandgap: bandgap@4a002260 { reg = <0x4a002260 0x4 0x4a00232C 0x4>; compatible = "ti,omap4430-bandgap"; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; #thermal-sensor-cells = <0>; }; @@ -76,11 +78,11 @@ /include/ "omap443x-clocks.dtsi" /* - * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel + * Use dpll_per for sgx at 307.2MHz like droid4 stock v3.0.8 Android kernel */ &sgx_module { assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>, <&dpll_per_m7x2_ck>; - assigned-clock-rates = <0>, <153600000>; + assigned-clock-rates = <0>, <307200000>; assigned-clock-parents = <&dpll_per_m7x2_ck>; }; diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts index 7c96c59b610d..c2b02895910c 100644 --- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts +++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts @@ -25,12 +25,6 @@ device_type = "memory"; reg = <0x0 0x80000000>; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -39,5 +33,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts index e610d49395d2..7ae34a23e320 100644 --- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts +++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -18,15 +18,8 @@ chosen { stdout-path = "serial3:115200n8"; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts index c92f8bdcb331..1585e33f703b 100644 --- a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts +++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts @@ -21,15 +21,8 @@ chosen { stdout-path = "serial3:115200n8"; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts index a2087e617cb2..ff91561ca99c 100644 --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts @@ -14,6 +14,7 @@ model = "Roseapple Pi"; aliases { + mmc0 = &mmc0; serial2 = &uart2; }; @@ -26,13 +27,100 @@ reg = <0x0 0x80000000>; /* 2GB */ }; - uart2_clk: uart2-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; + /* Fixed regulator used in the absence of PMIC */ + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&pinctrl { + i2c0_pins: i2c0-pins { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_pins: i2c1-pins { + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; + + i2c2_pins: i2c2-pins { + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; + }; + + mmc0_pins: mmc0-pins { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + + drv-pinconf { + groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv"; + drive-strength = <8>; + }; + + bias0-pinconf { + pins = "sd0_d0", "sd0_d1", "sd0_d2", + "sd0_d3", "sd0_cmd"; + bias-pull-up; + }; + + bias1-pinconf { + pins = "sd0_clk"; + bias-pull-down; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + &twd_timer { status = "okay"; }; @@ -43,5 +131,4 @@ &uart2 { status = "okay"; - clocks = <&uart2_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts index c665ce8b88b4..9d8f7336bec0 100644 --- a/arch/arm/boot/dts/owl-s500-sparky.dts +++ b/arch/arm/boot/dts/owl-s500-sparky.dts @@ -25,12 +25,6 @@ device_type = "memory"; reg = <0x0 0x40000000>; /* 1 or 2 GiB */ }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -39,5 +33,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 1dbe4e8b38ac..cd635f222d26 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -5,8 +5,11 @@ * Copyright (c) 2016-2017 Andreas Färber */ +#include <dt-bindings/clock/actions,s500-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/owl-s500-powergate.h> +#include <dt-bindings/reset/actions,s500-reset.h> / { compatible = "actions,s500"; @@ -70,6 +73,12 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -124,6 +133,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0120000 0x2000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART0>; status = "disabled"; }; @@ -131,6 +141,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0122000 0x2000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART1>; status = "disabled"; }; @@ -138,6 +149,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0124000 0x2000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART2>; status = "disabled"; }; @@ -145,6 +157,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0126000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART3>; status = "disabled"; }; @@ -152,6 +165,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0128000 0x2000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART4>; status = "disabled"; }; @@ -159,6 +173,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb012a000 0x2000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART5>; status = "disabled"; }; @@ -166,9 +181,68 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb012c000 0x2000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART6>; + status = "disabled"; + }; + + cmu: clock-controller@b0160000 { + compatible = "actions,s500-cmu"; + reg = <0xb0160000 0x8000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@b0170000 { + compatible = "actions,s500-i2c"; + reg = <0xb0170000 0x4000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@b0174000 { + compatible = "actions,s500-i2c"; + reg = <0xb0174000 0x4000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@b0178000 { + compatible = "actions,s500-i2c"; + reg = <0xb0178000 0x4000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@b017c000 { + compatible = "actions,s500-i2c"; + reg = <0xb017c000 0x4000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; + sirq: interrupt-controller@b01b0200 { + compatible = "actions,s500-sirq"; + reg = <0xb01b0200 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */ + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */ + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */ + }; + timer: timer@b0168000 { compatible = "actions,s500-timer"; reg = <0xb0168000 0x8000>; @@ -184,5 +258,71 @@ reg = <0xb01b0100 0x100>; #power-domain-cells = <1>; }; + + pinctrl: pinctrl@b01b0000 { + compatible = "actions,s500-pinctrl"; + reg = <0xb01b0000 0x40>, /* GPIO */ + <0xb01b0040 0x10>, /* Multiplexing Control */ + <0xb01b0060 0x18>, /* PAD Control */ + <0xb01b0080 0xc>; /* PAD Drive Capacity */ + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 132>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */ + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */ + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */ + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */ + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */ + }; + + dma: dma-controller@b0260000 { + compatible = "actions,s500-dma"; + reg = <0xb0260000 0xd00>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + power-domains = <&sps S500_PD_DMA>; + }; + + mmc0: mmc@b0230000 { + compatible = "actions,s500-mmc", "actions,owl-mmc"; + reg = <0xb0230000 0x38>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@b0234000 { + compatible = "actions,s500-mmc", "actions,owl-mmc"; + reg = <0xb0234000 0x38>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@b0238000 { + compatible = "actions,s500-mmc", "actions,owl-mmc"; + reg = <0xb0238000 0x38>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 4e6c50d45cb2..dace8ffeb991 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -461,11 +461,11 @@ }; gsbi@19800000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C>; i2c@19880000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi8_i2c_pins>; @@ -497,17 +497,17 @@ }; gsbi@19c00000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@19c40000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi12_serial_pins>; }; i2c@19c80000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi12_i2c_pins>; @@ -571,7 +571,7 @@ external-bus@1a100000 { /* The EBI2 will instantiate first, then populate its children */ - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_ebi2_pins>; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index a701d4bac320..3bce47d16ab3 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -302,11 +302,11 @@ }; gsbi@16500000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16540000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi6_uart_4pins>; @@ -314,10 +314,10 @@ }; gsbi@16600000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 209eb21cea00..0148148a8e0a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -141,10 +141,10 @@ }; gsbi@16600000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi7_uart_2pins>; }; @@ -152,7 +152,7 @@ /* OTG */ usb@12500000 { - status = "ok"; + status = "okay"; dr_mode = "otg"; ulpi { phy { @@ -209,7 +209,7 @@ }; pci@1b500000 { - status = "ok"; + status = "okay"; vdda-supply = <&pm8921_s3>; vdda_phy-supply = <&pm8921_lvs6>; vdda_refclk-supply = <&v3p3_fixed>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 83aaf4a74398..d0a17b5a5fa3 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -215,21 +215,21 @@ }; gsbi@16500000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_UART_W_FC>; serial@16540000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi6_uart_4pins>; }; }; gsbi@16600000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi7_uart_2pins>; }; @@ -279,7 +279,7 @@ }; pci@1b500000 { - status = "ok"; + status = "okay"; vdda-supply = <&pm8921_s3>; vdda_phy-supply = <&pm8921_lvs6>; vdda_refclk-supply = <&ext_3p3v>; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 8bf488fb86ad..72e47bdc5c12 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -362,11 +362,11 @@ }; gsbi@1a200000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@1a240000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi5_uart_pin_a>; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 244f04e19c9d..83793b835d40 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -19,13 +19,13 @@ soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; sdhci@f9824900 { bus-width = <8>; non-removable; - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -39,14 +39,14 @@ pinctrl-names = "default"; pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; bus-width = <4>; - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs2_phy>; phy-select = <&tcsr 0xb000 1>; extcon = <&smbb>, <&usb_id>; @@ -56,7 +56,7 @@ adp-disable; ulpi { phy@b { - status = "ok"; + status = "okay"; v3p3-supply = <&pm8941_l24>; v1p8-supply = <&pm8941_l6>; extcon = <&smbb>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts new file mode 100644 index 000000000000..028ac8e24797 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4018-ap120c-ac.dtsi" + +/ { + model = "ALFA Network AP120C-AC Bit"; + + leds { + compatible = "gpio-leds"; + + power { + label = "ap120c-ac:green:power"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan { + label = "ap120c-ac:green:wlan"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + support { + label = "ap120c-ac:green:support"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts new file mode 100644 index 000000000000..b7916fc26d68 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4018-ap120c-ac.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + + status: status { + label = "ap120c-ac:blue:status"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wlan2g { + label = "ap120c-ac:green:wlan2g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "ap120c-ac:red:wlan5g"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi new file mode 100644 index 000000000000..1f3b1ce82108 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "ALFA Network AP120C-AC"; + compatible = "alfa-network,ap120c-ac"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&tlmm { + i2c0_pins: i2c0_pinmux { + mux_i2c { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_mdio { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_mdc { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial0_pins: serial0_pinmux { + mux_uart { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi0_pins: spi0_pinmux { + mux_spi { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio4"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + usb-power { + line-name = "USB-power"; + gpios = <1 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&watchdog { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_i2c3 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + + partition@180000 { + label = "priv_data1"; + reg = <0x00180000 0x00010000>; + read-only; + }; + + partition@190000 { + label = "priv_data2"; + reg = <0x00190000 0x00010000>; + read-only; + }; + }; + }; + + nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "ubi2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial0_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; + + dwc3@8a00000 { + phys = <&usb3_hs_phy>; + phy-names = "usb2-phy"; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts new file mode 100644 index 000000000000..394412619894 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2018, Robert Marko <robimarko@gmail.com> + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "8devices Jalapeno"; + compatible = "8dev,jalapeno"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + pinmux_1 { + pins = "gpio53"; + function = "mdio"; + }; + + pinmux_2 { + pins = "gpio52"; + function = "mdc"; + }; + + pinconf { + pins = "gpio52", "gpio53"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + status = "okay"; + + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; + + spi-nand@1 { + status = "okay"; + + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "ubi2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 418f9a022336..c93b2164db44 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -30,7 +30,7 @@ soc { rng@22000 { - status = "ok"; + status = "okay"; }; pinctrl@1000000 { @@ -66,13 +66,13 @@ }; blsp_dma: dma@7884000 { - status = "ok"; + status = "okay"; }; spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 54 0>; mx25l25635e@0 { @@ -87,27 +87,27 @@ serial@78af000 { pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; cryptobam: dma@8e04000 { - status = "ok"; + status = "okay"; }; crypto@8e3a000 { - status = "ok"; + status = "okay"; }; watchdog@b017000 { - status = "ok"; + status = "okay"; }; wifi@a000000 { - status = "ok"; + status = "okay"; }; wifi@a800000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index 7a96f300bc8d..b0f476ff017f 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -9,11 +9,11 @@ soc { dma@7984000 { - status = "ok"; + status = "okay"; }; qpic-nand@79b0000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 7c1eb1963c67..7a337dc08741 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -70,23 +70,23 @@ serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; dma@7884000 { - status = "ok"; + status = "okay"; }; spi@78b5000 { /* BLSP1 QUP1 */ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 12 0>; m25p80@0 { @@ -99,7 +99,7 @@ }; pci@40000000 { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 38 0x1>; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index 8c7ef6537ae6..f343a2244386 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -9,12 +9,12 @@ soc { pci@40000000 { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 38 0x1>; }; spi@78b6000 { - status = "ok"; + status = "okay"; }; pinctrl@1000000 { @@ -43,13 +43,13 @@ serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 12 0>; m25p80@0 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts index af7a9028d492..582acb681a98 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts @@ -19,7 +19,7 @@ serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 9f1a5a668772..94872518b5a2 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -49,27 +49,27 @@ serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; dma@7884000 { - status = "ok"; + status = "okay"; }; i2c@78b7000 { /* BLSP1 QUP2 */ pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; dma@7984000 { - status = "ok"; + status = "okay"; }; qpic-nand@79b0000 { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 74d8e2c8e4b3..7bf1da916f25 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -190,7 +190,7 @@ reg = <0x1800000 0x60000>; }; - rng@22000 { + prng: rng@22000 { compatible = "qcom,prng"; reg = <0x22000 0x140>; clocks = <&gcc GCC_PRNG_AHB_CLK>; @@ -209,6 +209,16 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + vqmmc: regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; + sdhci: sdhci@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; @@ -300,7 +310,7 @@ status = "disabled"; }; - crypto@8e3a000 { + crypto: crypto@8e3a000 { compatible = "qcom,crypto-v5.1"; reg = <0x08e3a000 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, @@ -386,7 +396,7 @@ dma-names = "rx", "tx"; }; - watchdog@b017000 { + watchdog: watchdog@b017000 { compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; reg = <0xb017000 0x40>; clocks = <&sleep_clk>; @@ -605,5 +615,79 @@ reg = <4>; }; }; + + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; + reg = <0x9a000 0x800>; + reg-names = "phy_base"; + resets = <&gcc USB3_UNIPHY_PHY_ARES>; + reset-names = "por_rst"; + status = "disabled"; + }; + + usb3_hs_phy: hsphy@a6000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa6000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb3: usb3@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x8af8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB3_MASTER_CLK>, + <&gcc GCC_USB3_SLEEP_CLK>, + <&gcc GCC_USB3_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xf8000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_hs_phy>, <&usb3_ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + }; + }; + + usb2_hs_phy: hsphy@a8000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa8000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb2: usb2@60f8800 { + compatible = "qcom,dwc3"; + reg = <0x60f8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB2_MASTER_CLK>, + <&gcc GCC_USB2_SLEEP_CLK>, + <&gcc GCC_USB2_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@6000000 { + compatible = "snps,dwc3"; + reg = <0x6000000 0xf8000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 554c65e7aa0e..e5b9b9cf6097 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -24,7 +24,7 @@ gsbi@16300000 { i2c@16380000 { - status = "ok"; + status = "okay"; clock-frequency = <200000>; pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index e239a0486936..65330065390a 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -16,19 +16,19 @@ soc { gsbi@16300000 { qcom,mode = <GSBI_PROT_I2C_UART>; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; }; gsbi5: gsbi@1a200000 { qcom,mode = <GSBI_PROT_SPI>; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; @@ -57,12 +57,12 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { ports-implemented = <0x1>; - status = "ok"; + status = "okay"; }; gpio_keys { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index c51481405e7f..98995ead4413 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -20,7 +20,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -30,7 +30,7 @@ qcom,saw = <&saw0>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -67,7 +67,7 @@ no-map; }; - smem@41000000 { + smem: smem@41000000 { reg = <0x41000000 0x200000>; no-map; }; @@ -251,7 +251,7 @@ syscon-tcsr = <&tcsr>; - serial@12490000 { + gsbi2_serial: serial@12490000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; @@ -273,7 +273,6 @@ #address-cells = <1>; #size-cells = <0>; }; - }; gsbi4: gsbi@16300000 { @@ -326,7 +325,7 @@ syscon-tcsr = <&tcsr>; - serial@1a240000 { + gsbi5_serial: serial@1a240000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, <0x1a200000 0x1000>; @@ -386,6 +385,13 @@ }; }; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + sata_phy: sata-phy@1b400000 { compatible = "qcom,ipq806x-sata-phy"; reg = <0x1b400000 0x200>; @@ -397,7 +403,7 @@ status = "disabled"; }; - sata@29000000 { + sata: sata@29000000 { compatible = "qcom,ipq806x-ahci", "generic-ahci"; reg = <0x29000000 0x180>; @@ -720,7 +726,7 @@ regulator-always-on; }; - sdcc1bam:dma@12402000 { + sdcc1bam: dma@12402000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -730,7 +736,7 @@ qcom,ee = <0>; }; - sdcc3bam:dma@12182000 { + sdcc3bam: dma@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; @@ -740,13 +746,13 @@ qcom,ee = <0>; }; - amba { + amba: amba { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sdcc@12400000 { + sdcc1: sdcc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -766,7 +772,7 @@ dma-names = "tx", "rx"; }; - sdcc@12180000 { + sdcc3: sdcc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -779,7 +785,6 @@ cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <192000000>; - #mmc-ddr-1_8v; sd-uhs-sdr104; sd-uhs-ddr50; vqmmc-supply = <&vsdcc_fixed>; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index 26b034bd19d2..a725b73b5a2e 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -125,12 +125,12 @@ }; &gsbi3 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_SPI>; }; &gsbi3_spi { - status = "ok"; + status = "okay"; pinctrl-0 = <&gsbi3_pins>; pinctrl-names = "default"; assigned-clocks = <&gcc GSBI3_QUP_CLK>; @@ -138,34 +138,34 @@ }; &gsbi4 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_UART_W_FC>; }; &gsbi4_serial { - status = "ok"; + status = "okay"; pinctrl-0 = <&gsbi4_pins>; pinctrl-names = "default"; }; &gsbi5 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; }; &gsbi5_i2c { - status = "ok"; + status = "okay"; clock-frequency = <200000>; pinctrl-0 = <&gsbi5_i2c_pins>; pinctrl-names = "default"; }; &gsbi5_serial { - status = "ok"; + status = "okay"; pinctrl-0 = <&gsbi5_uart_pins>; pinctrl-names = "default"; }; &sdcc1 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index f01a11b18d6a..6a321ccb0bd0 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -17,10 +17,10 @@ soc { gsbi@19c00000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@19c40000 { - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 82d5d8267adf..e7d2e937ea4c 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -17,10 +17,10 @@ soc { gsbi@16400000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16440000 { - status = "ok"; + status = "okay"; }; }; @@ -273,12 +273,12 @@ }; gsbi@16000000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_SPI>; pinctrl-names = "default"; pinctrl-0 = <&spi1_default>; spi@16080000 { - status = "ok"; + status = "okay"; eth@0 { compatible = "micrel,ks8851"; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index d2d48770ec0f..ea15b645b229 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -256,11 +256,11 @@ &soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; remoteproc@fb21b000 { - status = "ok"; + status = "okay"; vddmx-supply = <&pm8841_s1>; vddcx-supply = <&pm8841_s2>; @@ -273,7 +273,7 @@ label = "pronto"; wcnss { - status = "ok"; + status = "okay"; }; }; }; @@ -335,7 +335,7 @@ }; sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -348,7 +348,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; @@ -360,7 +360,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -373,7 +373,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index e769f638f205..0cda654371ae 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -239,7 +239,7 @@ &soc { serial@f991d000 { - status = "ok"; + status = "okay"; }; pinctrl@fd510000 { @@ -410,7 +410,7 @@ }; sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -423,7 +423,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; bus-width = <4>; @@ -471,7 +471,7 @@ }; serial@f9960000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_uart10_pin_a>; @@ -490,7 +490,7 @@ }; i2c@f9967000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c11_pins>; clock-frequency = <355000>; @@ -498,7 +498,7 @@ led-controller@38 { compatible = "ti,lm3630a"; - status = "ok"; + status = "okay"; reg = <0x38>; #address-cells = <1>; @@ -514,7 +514,7 @@ }; i2c@f9968000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c12_pins>; clock-frequency = <100000>; @@ -551,7 +551,7 @@ }; i2c@f9923000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <100000>; @@ -585,7 +585,7 @@ }; i2c@f9924000 { - status = "ok"; + status = "okay"; clock-frequency = <355000>; qcom,src-freq = <50000000>; @@ -620,7 +620,7 @@ }; i2c@f9925000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; clock-frequency = <100000>; @@ -638,7 +638,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -652,7 +652,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -663,14 +663,14 @@ }; mdss@fd900000 { - status = "ok"; + status = "okay"; mdp@fd900000 { - status = "ok"; + status = "okay"; }; dsi@fd922800 { - status = "ok"; + status = "okay"; vdda-supply = <&pm8941_l2>; vdd-supply = <&pm8941_lvs3>; @@ -704,7 +704,7 @@ }; dsi-phy@fd922a00 { - status = "ok"; + status = "okay"; vddio-supply = <&pm8941_l12>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 97352de91314..a0f7f461f48c 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -12,8 +12,8 @@ aliases { serial0 = &blsp1_uart1; - sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ - sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { @@ -30,6 +30,7 @@ pma8084_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; + regulator-always-on; }; pma8084_s2: s2 { @@ -115,6 +116,7 @@ pma8084_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; pma8084_l13: l13 { @@ -298,12 +300,26 @@ enable-active-high; }; + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + /delete-node/ vreg-boost; }; &soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; gpio-keys { @@ -453,10 +469,20 @@ bias-pull-down; }; }; + + panel_te_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhc_1: sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pma8084_l20>; vqmmc-supply = <&pma8084_s4>; @@ -469,7 +495,7 @@ }; sdhc_2: sdhci@f9864900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; @@ -518,7 +544,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -531,7 +557,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pma8084_l6>; v3p3-supply = <&pma8084_l24>; @@ -697,6 +723,64 @@ pinctrl-0 = <&fuelgauge_pin>; }; }; + + adreno@fdb00000 { + status = "ok"; + }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pma8084_l12>; + }; + }; }; &spmi_bus { @@ -726,6 +810,14 @@ power-source = <PMA8084_GPIO_S4>; }; + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + wlan_sleep_clk_pin: wlan-sleep-clk-pin { pins = "gpio16"; function = "func2"; @@ -735,6 +827,15 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-pin { pins = "gpio21"; function = "normal"; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts index 5669f5f58a86..398a3eaf306b 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts @@ -261,7 +261,7 @@ &soc { sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -274,7 +274,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; bus-width = <4>; @@ -288,7 +288,7 @@ }; serial@f991e000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_pin_a>; @@ -366,7 +366,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -379,7 +379,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -415,7 +415,7 @@ }; coincell@2800 { - status = "ok"; + status = "okay"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; @@ -423,7 +423,7 @@ pm8941@1 { wled@d800 { - status = "ok"; + status = "okay"; qcom,cs-out; qcom,current-limit = <20>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts index 701b396719c7..f4ec08f13003 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -279,7 +279,7 @@ &soc { sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -292,7 +292,7 @@ }; sdhci@f9864900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; non-removable; @@ -316,7 +316,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; bus-width = <4>; @@ -330,14 +330,14 @@ }; serial@f991e000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_pin_a>; }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -350,7 +350,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -482,7 +482,7 @@ }; i2c@f9964000 { - status = "ok"; + status = "okay"; clock-frequency = <355000>; qcom,src-freq = <50000000>; @@ -522,7 +522,7 @@ }; i2c@f9967000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c11_pins>; clock-frequency = <355000>; @@ -635,7 +635,7 @@ }; coincell@2800 { - status = "ok"; + status = "okay"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 611bae9fe66b..9743beebd84d 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -261,7 +261,7 @@ &soc { usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -274,7 +274,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -286,7 +286,7 @@ }; sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -299,7 +299,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; bus-width = <4>; @@ -313,14 +313,14 @@ }; serial@f991e000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_pin_a>; }; i2c@f9924000 { - status = "ok"; + status = "okay"; clock-frequency = <355000>; qcom,src-freq = <50000000>; @@ -464,7 +464,7 @@ }; coincell@2800 { - status = "ok"; + status = "okay"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; @@ -472,7 +472,7 @@ pm8941@1 { wled@d800 { - status = "ok"; + status = "okay"; qcom,cs-out; qcom,current-limit = <20>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 51f5f904f9eb..c65d33591efa 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1399,6 +1399,49 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; + gpu: adreno@fdb00000 { + status = "disabled"; + + compatible = "qcom,adreno-330.1", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", + "ocmem"; + + // iommus = <&gpu_iommu 0>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + mdss: mdss@fd900000 { status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index 6740a4cb7da8..b64c28036dd0 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -14,5 +14,10 @@ clock-controller@fc400000 { compatible = "qcom,gcc-msm8974pro"; }; + + adreno@fdb00000 { + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi new file mode 100644 index 000000000000..6571b88d018a --- /dev/null +++ b/arch/arm/boot/dts/qcom-pmx55.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@8 { + compatible = "qcom,pmx55", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmx55_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmx55_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmx55_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pmx55_gpios: gpio@c000 { + compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@9 { + compatible = "qcom,pmx55", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts new file mode 100644 index 000000000000..9649c1e11311 --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +/dts-v1/; + +#include "qcom-sdx55.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pm8150b.dtsi> +#include "qcom-pmx55.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX55 MTP"; + compatible = "qcom,sdx55-mtp", "qcom,sdx55"; + qcom,board-id = <0x5010008 0x0>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90c00000 { + no-map; + reg = <0x90c00000 0xd400000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pmx55-rpmh-regulators { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi new file mode 100644 index 000000000000..e4180bbc4655 --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX55 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +#include <dt-bindings/clock/qcom,gcc-sdx55.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + hyp_mem: memory@8fc00000 { + no-map; + reg = <0x8fc00000 0x80000>; + }; + + ac_db_mem: memory@8fc80000 { + no-map; + reg = <0x8fc80000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + sbl_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x100000>; + }; + + aop_image: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + aop_cmd_db: memory@8fe20000 { + compatible = "qcom,cmd-db"; + reg = <0x8fe20000 0x20000>; + no-map; + }; + + smem_mem: memory@8fe40000 { + no-map; + reg = <0x8fe40000 0xc0000>; + }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@0x90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + blsp1_uart3: serial@831000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x00831000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>; + clocks = <&gcc 30>, + <&gcc 9>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + usb_hsphy: phy@ff4000 { + compatible = "qcom,usb-snps-hs-7nm-phy"; + reg = <0x00ff4000 0x114>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx55-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c0>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6200 0x170>, + <0x00ff6400 0x200>, + <0x00ff6800 0x800>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_1: sdhci@8804000 { + compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx55-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b210000 { + compatible = "qcom,sdx55-pdc", "qcom,pdc"; + reg = <0x0b210000 0x30000>; + qcom,pdc-ranges = <0 179 52>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + + spmi_bus: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x0000d00>, + <0x0c600000 0x2000000>, + <0x0e600000 0x0100000>, + <0x0e700000 0x00a0000>, + <0x0c40a000 0x0000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0xf100000 0x300000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx55-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17800000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <3>; + reg = <0x17800000 0x1000>, + <0x17802000 0x1000>; + }; + + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17820000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17820000 0x1000>; + clock-frequency = <19200000>; + + frame@17821000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 0x4>, + <GIC_SPI 6 0x4>; + reg = <0x17821000 0x1000>, + <0x17822000 0x1000>; + }; + + frame@17823000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 0x4>; + reg = <0x17823000 0x1000>; + status = "disabled"; + }; + + frame@17824000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 0x4>; + reg = <0x17824000 0x1000>; + status = "disabled"; + }; + + frame@17825000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 0x4>; + reg = <0x17825000 0x1000>; + status = "disabled"; + }; + + frame@17826000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 0x4>; + reg = <0x17826000 0x1000>; + status = "disabled"; + }; + + frame@17827000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 0x4>; + reg = <0x17827000 0x1000>; + status = "disabled"; + }; + + frame@17828000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 0x4>; + reg = <0x17828000 0x1000>; + status = "disabled"; + }; + + frame@17829000 { + frame-number = <7>; + interrupts = <GIC_SPI 14 0x4>; + reg = <0x17829000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17840000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x17830000 0x10000>, <0x17840000 0x10000>; + reg-names = "drv-0", "drv-1"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <1>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdx55-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdx55-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 093567022386..47a787a12e55 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -54,25 +54,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@20078000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20078000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC2>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -292,6 +273,21 @@ status = "disabled"; }; + nfc: nand-controller@10500000 { + compatible = "rockchip,rk3036-nfc", + "rockchip,rk2928-nfc"; + reg = <0x10500000 0x4000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 + &flash_rdn &flash_rdy &flash_wrn>; + pinctrl-names = "default"; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3036-cru"; reg = <0x20000000 0x1000>; @@ -494,6 +490,18 @@ status = "disabled"; }; + pdma: pdma@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3036-pinctrl"; rockchip,grf = <&grf>; @@ -643,6 +651,43 @@ }; }; + nfc { + flash_ale: flash-ale { + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>, + <1 RK_PD1 1 &pcfg_pull_default>, + <1 RK_PD2 1 &pcfg_pull_default>, + <1 RK_PD3 1 &pcfg_pull_default>, + <1 RK_PD4 1 &pcfg_pull_default>, + <1 RK_PD5 1 &pcfg_pull_default>, + <1 RK_PD6 1 &pcfg_pull_default>, + <1 RK_PD7 1 &pcfg_pull_default>; + }; + + flash_cle: flash-cle { + rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>; + }; + + flash_csn0: flash-csn0 { + rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>; + }; + }; + emac { emac_xfer: emac-xfer { rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */ diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 48e6e8d44a1a..a4dd50aaf3fc 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -14,6 +14,9 @@ interrupt-parent = <&gic>; aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -95,24 +98,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@110f0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x110f0000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -464,6 +449,17 @@ <75000000>; }; + pdma: pdma@110f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x110f0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index cf54d5ffff2f..713f55e143c6 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -123,6 +123,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 68d5a58cfe88..ea7416c31f9b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -154,50 +154,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_peri: dma-controller@ff250000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff250000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC2>; - clock-names = "apb_pclk"; - }; - - dmac_bus_ns: dma-controller@ff600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff600000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - dmac_bus_s: dma-controller@ffb20000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xffb20000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -487,15 +443,27 @@ status = "disabled"; }; + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + thermal-zones { - reserve_thermal: reserve_thermal { + reserve_thermal: reserve-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ thermal-sensors = <&tsadc 0>; }; - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -539,7 +507,7 @@ }; }; - gpu_thermal: gpu_thermal { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -665,6 +633,19 @@ status = "disabled"; }; + dmac_bus_ns: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + i2c0: i2c@ff650000 { compatible = "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; @@ -1329,75 +1310,87 @@ }; qos_gpu_r: qos@ffaa0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaa0000 0x0 0x20>; }; qos_gpu_w: qos@ffaa0080 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaa0080 0x0 0x20>; }; qos_vio1_vop: qos@ffad0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0000 0x0 0x20>; }; qos_vio1_isp_w0: qos@ffad0100 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0100 0x0 0x20>; }; qos_vio1_isp_w1: qos@ffad0180 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0180 0x0 0x20>; }; qos_vio0_vop: qos@ffad0400 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0400 0x0 0x20>; }; qos_vio0_vip: qos@ffad0480 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0480 0x0 0x20>; }; qos_vio0_iep: qos@ffad0500 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0500 0x0 0x20>; }; qos_vio2_rga_r: qos@ffad0800 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0800 0x0 0x20>; }; qos_vio2_rga_w: qos@ffad0880 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0880 0x0 0x20>; }; qos_vio1_isp_r: qos@ffad0900 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0900 0x0 0x20>; }; qos_video: qos@ffae0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffae0000 0x0 0x20>; }; qos_hevc_r: qos@ffaf0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaf0000 0x0 0x20>; }; qos_hevc_w: qos@ffaf0080 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaf0080 0x0 0x20>; }; + dmac_bus_s: dma-controller@ffb20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xffb20000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + }; + efuse: efuse@ffb40000 { compatible = "rockchip,rk3288-efuse"; reg = <0x0 0xffb40000 0x0 0x20>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 859a7477909f..755c946f11de 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -32,50 +32,6 @@ spi1 = &spi1; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dmac1_s: dma-controller@20018000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20018000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMA1>; - clock-names = "apb_pclk"; - }; - - dmac1_ns: dma-controller@2001c000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x2001c000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMA1>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - dmac2: dma-controller@20078000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20078000 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMA2>; - clock-names = "apb_pclk"; - }; - }; - xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -151,42 +107,42 @@ }; qos_gpu: qos@1012d000 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012d000 0x20>; }; qos_vpu: qos@1012e000 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012e000 0x20>; }; qos_lcdc0: qos@1012f000 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f000 0x20>; }; qos_cif0: qos@1012f080 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f080 0x20>; }; qos_ipp: qos@1012f100 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f100 0x20>; }; qos_lcdc1: qos@1012f180 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f180 0x20>; }; qos_cif1: qos@1012f200 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f200 0x20>; }; qos_rga: qos@1012f280 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f280 0x20>; }; @@ -276,6 +232,15 @@ status = "disabled"; }; + nfc: nand-controller@10500000 { + compatible = "rockchip,rk2928-nfc"; + reg = <0x10500000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC0>; + clock-names = "ahb"; + status = "disabled"; + }; + pmu: pmu@20004000 { compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd"; reg = <0x20004000 0x100>; @@ -295,6 +260,31 @@ reg = <0x20008000 0x200>; }; + dmac1_s: dma-controller@20018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20018000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + }; + + dmac1_ns: dma-controller@2001c000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x2001c000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + i2c0: i2c@2002d000 { compatible = "rockchip,rk3066-i2c"; reg = <0x2002d000 0x1000>; @@ -469,4 +459,16 @@ dma-names = "tx", "rx"; status = "disabled"; }; + + dmac2: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMA2>; + clock-names = "apb_pclk"; + }; }; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index e491964b1c3d..7319a2473b80 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -19,6 +19,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &emmc; + mmc1 = &sdio; + mmc2 = &sdmmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -452,6 +455,17 @@ #reset-cells = <1>; }; + nfc: nand-controller@30100000 { + compatible = "rockchip,rv1108-nfc"; + reg = <0x30100000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + status = "disabled"; + }; + emmc: mmc@30110000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30110000 0x4000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 0013ec3463c4..a574ea91d9d3 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -15,13 +15,13 @@ #size-cells = <0>; enable-method = "altr,socfpga-a10-smp"; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; @@ -29,6 +29,15 @@ }; }; + pmu: pmu@ff111000 { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 124 4>, <0 125 4>; + interrupt-affinity = <&cpu0>, <&cpu1>; + reg = <0xff111000 0x1000>, + <0xff113000 0x1000>; + }; + intc: intc@ffffd000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 4c16736ea789..4fd09997a2b9 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -122,9 +122,11 @@ ab8500_temp { compatible = "stericsson,abx500-temp"; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ABX500_TEMP_WARM"; io-channels = <&gpadc 0x06>, <&gpadc 0x07>; - io-channel-name = "aux1", "aux2"; + io-channel-names = "aux1", "aux2"; }; ab8500_battery: ab8500_battery { @@ -134,29 +136,77 @@ ab8500_fg { compatible = "stericsson,ab8500-fg"; - battery = <&ab8500_battery>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <8 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "NCONV_ACCU", + "BATT_OVV", + "LOW_BAT_F", + "CC_INT_CALIB", + "CCEOC"; + battery = <&ab8500_battery>; io-channels = <&gpadc 0x08>; - io-channel-name = "main_bat_v"; + io-channel-names = "main_bat_v"; }; ab8500_btemp { compatible = "stericsson,ab8500-btemp"; - battery = <&ab8500_battery>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "BAT_CTRL_INDB", + "BTEMP_LOW", + "BTEMP_HIGH", + "BTEMP_LOW_MEDIUM", + "BTEMP_MEDIUM_HIGH"; + battery = <&ab8500_battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; - io-channel-name = "btemp_ball", + io-channel-names = "btemp_ball", "bat_ctrl"; }; ab8500_charger { - compatible = "stericsson,ab8500-charger"; + compatible = "stericsson,ab8500-charger"; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>, + <0 IRQ_TYPE_LEVEL_HIGH>, + <107 IRQ_TYPE_LEVEL_HIGH>, + <106 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <105 IRQ_TYPE_LEVEL_HIGH>, + <104 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>, + <21 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "MAIN_CH_UNPLUG_DET", + "MAIN_CHARGE_PLUG_DET", + "MAIN_EXT_CH_NOT_OK", + "MAIN_CH_TH_PROT_R", + "MAIN_CH_TH_PROT_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_CH_TH_PROT_R", + "USB_CH_TH_PROT_F", + "USB_CHARGER_NOT_OKR", + "VBUS_OVV", + "CH_WD_EXP", + "VBUS_CH_DROP_END"; battery = <&ab8500_battery>; vddadc-supply = <&ab8500_ldo_tvout_reg>; io-channels = <&gpadc 0x03>, <&gpadc 0x0a>, <&gpadc 0x09>, <&gpadc 0x0b>; - io-channel-name = "main_charger_v", + io-channel-names = "main_charger_v", "main_charger_c", "vbus_v", "usb_charger_c"; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index c72aa250bf6f..cc045b2fc217 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -13,7 +13,8 @@ <&gpadc 0x08>, /* Main battery voltage */ <&gpadc 0x09>, /* VBUS */ <&gpadc 0x0b>, /* Charger current */ - <&gpadc 0x0c>; /* Backup battery voltage */ + <&gpadc 0x0c>, /* Backup battery voltage */ + <&gpadc 0x0d>; /* Die temperature */ }; soc { @@ -45,9 +46,8 @@ gpadc: ab8500-gpadc { compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 IRQ_TYPE_LEVEL_HIGH - 39 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "HW_CONV_END", "SW_CONV_END"; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "SW_CONV_END"; vddadc-supply = <&ab8500_ldo_adc_reg>; #address-cells = <1>; #size-cells = <0>; @@ -84,42 +84,93 @@ bk_bat_v: channel@0c { reg = <0x0c>; }; + die_temp: channel@0d { + reg = <0x0d>; + }; usb_id: channel@0e { reg = <0x0e>; }; }; ab8500_battery: ab8500_battery { - status = "disabled"; + stericsson,battery-type = "LIPO"; thermistor-on-batctrl; }; ab8500_fg { status = "disabled"; compatible = "stericsson,ab8500-fg"; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <8 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "NCONV_ACCU", + "BATT_OVV", + "LOW_BAT_F", + "CC_INT_CALIB", + "CCEOC"; battery = <&ab8500_battery>; io-channels = <&gpadc 0x08>; - io-channel-name = "main_bat_v"; + io-channel-names = "main_bat_v"; }; ab8500_btemp { status = "disabled"; compatible = "stericsson,ab8500-btemp"; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "BAT_CTRL_INDB", + "BTEMP_LOW", + "BTEMP_HIGH", + "BTEMP_LOW_MEDIUM", + "BTEMP_MEDIUM_HIGH"; battery = <&ab8500_battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; - io-channel-name = "btemp_ball", + io-channel-names = "btemp_ball", "bat_ctrl"; }; ab8500_charger { status = "disabled"; compatible = "stericsson,ab8500-charger"; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>, + <0 IRQ_TYPE_LEVEL_HIGH>, + <107 IRQ_TYPE_LEVEL_HIGH>, + <106 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <105 IRQ_TYPE_LEVEL_HIGH>, + <104 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>, + <21 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "MAIN_CH_UNPLUG_DET", + "MAIN_CHARGE_PLUG_DET", + "MAIN_EXT_CH_NOT_OK", + "MAIN_CH_TH_PROT_R", + "MAIN_CH_TH_PROT_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_CH_TH_PROT_R", + "USB_CH_TH_PROT_F", + "USB_CHARGER_NOT_OKR", + "VBUS_OVV", + "CH_WD_EXP", + "VBUS_CH_DROP_END"; battery = <&ab8500_battery>; vddadc-supply = <&ab8500_ldo_adc_reg>; io-channels = <&gpadc 0x09>, <&gpadc 0x0b>; - io-channel-name = "vbus_v", + io-channel-names = "vbus_v", "usb_charger_c"; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 404b9c4a5fee..68607e4ad80c 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -883,7 +883,7 @@ status = "disabled"; }; - sdi0_per1@80126000 { + mmc@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -899,7 +899,7 @@ status = "disabled"; }; - sdi1_per2@80118000 { + mmc@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; @@ -915,7 +915,7 @@ status = "disabled"; }; - sdi2_per3@80005000 { + mmc@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; @@ -931,7 +931,7 @@ status = "disabled"; }; - sdi3_per2@80119000 { + mmc@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -947,7 +947,7 @@ status = "disabled"; }; - sdi4_per2@80114000 { + mmc@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; @@ -963,7 +963,7 @@ status = "disabled"; }; - sdi5_per3@80008000 { + mmc@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index ff47cbf6ed3b..83b179692dff 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -113,23 +113,8 @@ status = "okay"; }; - /* ST6G3244ME level translator for 1.8/2.9 V */ - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - - states = <1800000 0x1 - 2900000 0x0>; - }; - // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -152,7 +137,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -165,7 +150,7 @@ }; // PoP:ed eMMC - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; @@ -180,7 +165,7 @@ }; // On-board eMMC - sdi4_per2@80114000 { + mmc@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts index f8c0c1e6aa04..a036a03f6718 100644 --- a/arch/arm/boot/dts/ste-href520-tvk.dts +++ b/arch/arm/boot/dts/ste-href520-tvk.dts @@ -12,11 +12,43 @@ model = "ST-Ericsson HREF520 and TVK1281618 UIB"; compatible = "st-ericsson,href520", "st-ericsson,u8500"; - soc { - vmmci: regulator-gpio { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; - enable-active-high; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; +}; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_href520_cfg1 { + pins = "GPIO78_F4"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_href520_cfg2 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 8ce6b723abf2..dfc933214c1a 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -12,6 +12,25 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 142f5475521f..4e6e4439dcff 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -11,4 +11,23 @@ / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 115495de8612..29b67abfc461 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -61,16 +61,10 @@ }; // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; }; - vmmci: regulator-gpio { - gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; - enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - pinctrl { /* Set this up using hogs */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 1316886e6bcb..52c56ed17ae6 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -14,6 +14,28 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { @@ -33,3 +55,20 @@ }; }; }; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index 5d4b8245f02c..9c2d2ee6d6d8 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -13,4 +13,43 @@ / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; +}; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 05b4fbbba57f..8f504edefd3f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -10,6 +10,64 @@ model = "ST-Ericsson HREF (v60+) platform with Device Tree"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + + thermal-sensors = <&therm1>, <&therm2>; + + /* Tripping points made from rough guess about operating conditions */ + trips { + chassis_alert: chassis-alert { + /* At 50 degrees take down the CPU frequency */ + temperature = <50000>; + hysteresis = <3000>; + type = "active"; + }; + chassis_crit: chassis-crit { + /* Just shut down at 70 degrees */ + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + /* Push down the operating frequency of the SoC when it gets hot */ + cooling-maps { + map0 { + trip = <&chassis_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <100>; + }; + }; + }; + }; + + /* + * Thermistors on the board, formally to monitor battery temperatures + * but what they measure is the board temperature. + */ + therm1: thermistor@0 { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x06>; /* AUX1 */ + pullup-uv = <1800000>; + pullup-ohm = <220000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + therm2: thermistor@1 { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x07>; /* AUX2 */ + pullup-uv = <1800000>; + pullup-ohm = <220000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + soc { /* Name the GPIO muxed rails on the HREF boards */ gpio@8012e000 { @@ -132,16 +190,10 @@ }; // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; - vmmci: regulator-gpio { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - pinctrl { /* * Set this up using hogs, as time goes by and as seems fit, these @@ -166,16 +218,6 @@ pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; - /* VMMCI level-shifter enable */ - default_hrefv60_cfg2 { - pins = "GPIO169_D22"; - ste,config = <&gpio_out_hi>; - }; - /* VMMCI level-shifter voltage select */ - default_hrefv60_cfg3 { - pins = "GPIO5_AG6"; - ste,config = <&gpio_out_hi>; - }; }; }; ipgpio { diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 41ed21a4fdc1..8142c017882c 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -195,7 +195,7 @@ pinctrl-0 = <&uart0_nhk_mode>; status = "okay"; }; - mmcsd: sdi@101f6000 { + mmcsd: mmc@101f6000 { cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>; wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 4445446fa828..f16314ffbf4b 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -139,7 +139,7 @@ status = "okay"; }; /* Configure card detect for the uSD slot */ - mmcsd: sdi@101f6000 { + mmc@101f6000 { cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 4f38aeecadb3..c9b906432341 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -825,7 +825,7 @@ interrupts = <10>; }; - mmcsd: sdi@101f6000 { + mmcsd: mmc@101f6000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x101f6000 0x1000>; clocks = <&sdiclk>, <&pclksdi>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 27d8a07718a0..b344b3748143 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -213,7 +213,7 @@ }; // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -241,7 +241,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -253,7 +253,7 @@ }; // Unused PoP eMMC - register and put it to sleep by default */ - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; pinctrl-names = "default"; pinctrl-0 = <&mc2_a_1_sleep>; @@ -262,7 +262,7 @@ }; // On-board eMMC - sdi4_per2@80114000 { + mmc@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 60fe6189e728..0d43ee6583cf 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -5,6 +5,7 @@ #include "ste-ab8505.dtsi" #include "ste-dbx5x0-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -72,7 +73,7 @@ soc { /* External Micro SD card slot */ - sdi0_per1@80126000 { + mmc@80126000 { status = "okay"; arm,primecell-periphid = <0x10480180>; @@ -100,7 +101,7 @@ }; /* WLAN SDIO */ - sdi1_per2@80118000 { + mmc@80118000 { status = "okay"; arm,primecell-periphid = <0x10480180>; @@ -134,7 +135,7 @@ }; /* eMMC */ - sdi2_per3@80005000 { + mmc@80005000 { status = "okay"; arm,primecell-periphid = <0x10480180>; @@ -374,6 +375,32 @@ }; }; + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + vibrator { compatible = "gpio-vibrator"; /* GPIO195 (MOT_EN) */ @@ -499,6 +526,15 @@ }; }; + flash { + gpio_flash_default_mode: flash_default { + golden_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + i2c-gpio-1 { i2c_gpio_1_default: i2c_gpio_1 { golden_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts new file mode 100644 index 000000000000..7411bfeda285 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -0,0 +1,930 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung Galaxy S Advance GT-I9070 also known as Janice. + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8500.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy S Advance (GT-I9070)"; + compatible = "samsung,janice", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VMEM_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; // FIXME + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + /* + * External Ricoh "TSP" regulator for the touchscreen. + * One GPIO line controls two voltages of 3.3V and 1.8V + * this line is known as "TSP_LDO_ON1" in the schematics. + */ + ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "LDO_TSP_A3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* GPIO94 controls this regulator */ + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_ldo_en_default_mode>; + }; + ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_TSP_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO94 controls this regulator */ + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_ldo_en_default_mode>; + }; + + /* + * External Ricoh "TSP" regulator for the touchkeys. + * Two GPIO lines controls two voltages of 3.3V and 1.8V + * TSP_LDO_ON2 controls VREG_TOUCHKEY_1V8 + * EN_LED_LDO controls VREG_KLED_3V3 (key LED) + */ + ldo_kled_3v3_reg: regulator-gpio-vreg-kled-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_KLED_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* GPIO68 controls this regulator */ + gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_led_ldo_default_mode>; + }; + ldo_touchkey_1v8_reg: regulator-gpio-vreg-touchkey-1v8 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_TOUCHKEY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO89 controls this regulator */ + gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_ldo_on2_default_mode>; + }; + + + /* + * External Ricoh RP152L010B-TR LCD LDO regulator for the display. + * LCD_PWR_EN controls a 3.0V and 1.8V output. + */ + lcd_3v0_reg: regulator-gpio-lcd-3v0 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_3V0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + lcd_1v8_reg: regulator-gpio-lcd-1v8 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + + /* + * This regulator is a GPIO line that drives the Broadcom WLAN + * line BT_VREG_EN high and enables the internal regulators + * inside the chip. + * + * The voltage specified here is only used to determine the OCR mask, + * the for the SDIO connector, the chip is actually connected + * directly to VBAT. + */ + wl_bt_reg: regulator-gpio-wlan { + compatible = "regulator-fixed"; + regulator-name = "BT_VREG_EN"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <100000>; + /* GPIO222 (BT_VREG_EN) */ + gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_ldo_en_default>; + }; + + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + }; + + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + + /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + /* Yamaha YAS530 magnetometer */ + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + /* VDD 3V */ + vdd-supply = <&ab8500_ldo_aux1_reg>; + /* IOVDD 1.8V */ + iovdd-supply = <&ab8500_ldo_aux2_reg>; + /* GPIO204 COMPASS_RST_N */ + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&yas529_default>; + }; + /* TODO: this should also be used by the NCP6914 Camera power management unit */ + }; + + /* + * These pins do have an spi controller, however the controller on + * these pins is not the fully featured PL022 SSP/SPI block but the + * ST Micro diet "PL023" version. One of the lacking features in + * this derivative is 3wire support, so it cannot be used to drive + * this panel interface. We have to use GPIO bit-banging instead. + */ + spi-gpio-0 { + compatible = "spi-gpio"; + /* Clock on GPIO220 */ + sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; + /* MISO/MOSI on GPIO224 (no separate MISO pin) */ + mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + /* Chip select on GPIO223 */ + cs-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + vdd3-supply = <&lcd_3v0_reg>; + vci-supply = <&lcd_1v8_reg>; + /* Reset on GPIO139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_mode>; + spi-3wire; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + + /* + * Current sense amplifier on the light sensor to convert current to + * voltage. We do not know if this is the actual configuration. The + * sense resistor value was found by calibrating in a room ambient + * light with a second mobile phone light sensor as reference. If you + * pry a Janice phone apart and inspect it you may figure this out. + */ + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&gpadc 0x07>; + shunt-resistor-micro-ohms = <15000000>; /* 15 ohms c:a */ + #io-channel-cells = <0>; + io-channel-ranges; + }; + + /* Bit-banged I2C on GPIO196 and GPIO197 also called "TOUCHKEY_I2C" */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio6 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio6 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + vdd-supply = <&ldo_kled_3v3_reg>; + vcc-supply = <&ldo_touchkey_1v8_reg>; + vddio-supply = <&ldo_touchkey_1v8_reg>; + + /* Interrupt on GPIO 198 */ + interrupt-parent = <&gpio6>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_default_mode>; + linux,keycodes = <KEY_MENU KEY_BACK>; + }; + }; + + /* Bit-banged I2C on GPIO201 and GPIO202 also called "MOT_I2C" */ + i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio6 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio6 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_2_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: add the Immersion ISA1200 I2C device here */ + }; + + /* Bit-banged I2C on GPIO151 and GPIO152 also called "NFC_I2C" */ + i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_3_default>; + #address-cells = <1>; + #size-cells = <0>; + + nfc@30 { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x30>; + /* NFC IRQ on GPIO32 */ + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + /* GPIO 31 */ + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + /* GPIO88 */ + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pn547_janice_default>; + }; + }; + + soc { + /* External Micro SD slot */ + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-pin-fbclk; + full-pwr-cycle; + /* MMC is powered by AUX3 1.2V .. 2.91V */ + vmmc-supply = <&ab8500_ldo_aux3_reg>; + /* 2.9 V level translator is using AUX3 at 2.9 V as well */ + vqmmc-supply = <&ab8500_ldo_aux3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + status = "okay"; + }; + + /* WLAN SDIO channel */ + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + /* + * GPIO-controlled voltage enablement: this drives + * the BT_VREG_EN line high when we use this device. + * Represented as regulator to fill OCR mask and to + * be usable in parallel with the Bluetooth chip. + */ + vmmc-supply = <&wl_bt_reg>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + /* Actually BRCM4330 */ + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + /* GPIO215 WLAN_RST_N */ + /* FIXME: kernel does not use this assert/deassert */ + reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + /* eMMC */ + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + /* + * We actually have shutdown-gpios, BT_VREG_EN on GPIO222, + * but since this GPIO is shared with the WLAN chip, we need + * to reference the regulator instead. The regulator + * framework will reference count the GPIO usage and + * make sure we can use the same GPIO for several supplies. + */ + // shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + vbat-supply = <&wl_bt_reg>; + /* BT_WAKE on GPIO199 */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* BT_HOST_WAKE on GPIO97 */ + /* FIXME: convert to interrupt */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + /* BT_RST_N on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPS UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + /* CTS/RTS is not used, CTS is repurposed as GPIO */ + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + /* FIXME: add a device for the GPS here */ + }; + + /* Debugging console UART connected to TSU6111RSVR (FSA880) */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8500 { + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8500-regulators { + ab8500_ldo_aux1 { + /* Used for VDD for sensors */ + regulator-name = "V-SENSORS-VDD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ab8500_ldo_aux2 { + /* Used for VIO for sensors */ + regulator-name = "V-SENSORS-VIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux3 { + /* Used for voltage for external MMC/SD card */ + regulator-name = "V-MMC-SD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2910000>; + }; + }; + }; + }; + + /* I2C0 */ + i2c@80004000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + /* Janice has the GP2AP002A00F with light sensor */ + compatible = "sharp,gp2ap002a00f"; + clock-frequency = <400000>; + reg = <0x44>; + + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux2_reg>; + /* ADC channel AUX2 to read ALSOUT ambient light sensor out */ + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + pinctrl-names = "default"; + pinctrl-0 = <&gp2ap002_janice_default>; + /* B1 mode (arch/arm/mach-ux500/include/mach/gp2a.h) */ + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + + /* I2C1 on GPIO16 and GPIO17 also called "MUS I2C" */ + i2c@80122000 { + status = "okay"; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_b_2_default>; + pinctrl-1 = <&i2c1_b_2_sleep>; + + /* Texas Instruments TSU6111 micro USB switch */ + usb-switch@25 { + compatible = "ti,tsu6111"; + reg = <0x25>; + /* Interrupt JACK_INT_N on GPIO95 */ + interrupt-parent = <&gpio2>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tsu6111_janice_default>; + }; + }; + + /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */ + i2c@80128000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* GPIO226 interrupt */ + interrupt-parent = <&gpio7>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + /* FIXME: no idea about this */ + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + vlogic-supply = <&ab8500_ldo_aux2_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + pinctrl-names = "default"; + pinctrl-0 = <&mpu3050_janice_default>; + + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + /* Bosch BMA222 accelerometer */ + accelerometer@08 { + compatible = "bosch,bma222"; + reg = <0x08>; + /* FIXME: no idea about this */ + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + }; + }; + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* Atmel mXT224E touchscreen */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + /* VDDA is "analog supply", 2.57-3.47 V */ + vdda-supply = <&ldo_tsp_3v3_reg>; + /* VDD is "digital supply" 1.71-3.47V */ + vdd-supply = <&ldo_tsp_1v8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dpi_default_mode>; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0_A_2 default config to include + * the card detect GPIO217 line. + */ + sdi0 { + mc0_a_2_default { + default_cfg4 { + pins = "GPIO217_AH12"; /* card detect */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + mcde { + dpi_default_mode: dpi_default { + default_mux1 { + /* Mux in all the data lines */ + function = "lcd"; + groups = + /* Data lines D0-D7 GPIO70..GPIO77 */ + "lcd_d0_d7_a_1", + /* Data lines D8-D11 GPIO78..GPIO81 */ + "lcd_d8_d11_a_1", + /* Data lines D12-D15 GPIO82..GPIO85 */ + "lcd_d12_d15_a_1", + /* Data lines D16-D23 GPIO161..GPIO168 */ + "lcd_d16_d23_b_1"; + }; + default_mux2 { + function = "lcda"; + /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */ + groups = "lcdaclk_b_1", "lcda_b_1"; + }; + /* Input, no pull-up is the default state for pins used for an alt function */ + default_cfg1 { + pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23"; + ste,config = <&in_nopull>; + }; + }; + }; + /* GPIO for panel reset control */ + panel { + panel_default_mode: panel_default { + janice_cfg1 { + /* Reset line */ + pins = "GPIO139_C9"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO6 */ + janice_cfg1 { + pins = "GPIO6_AF6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the touchscreen */ + tsp-ldo { + tsp_ldo_en_default_mode: tsp_ldo_default { + /* LDO enable on GPIO94 */ + janice_cfg1 { + pins = "GPIO94_D7"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the key LED */ + key-led { + en_led_ldo_default_mode: en_led_ldo_default { + /* EN_LED_LDO on GPIO68 */ + janice_cfg1 { + pins = "GPIO68_E1"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the touchkeys */ + touchkey-ldo { + tsp_ldo_on2_default_mode: tsp_ldo_on2_default { + /* TSP_LDO_ON2 on GPIO89 */ + janice_cfg1 { + pins = "GPIO89_E6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + touchkey { + touchkey_default_mode: touchkey_default { + janice_cfg1 { + /* Interrupt */ + pins = "GPIO198_AG25"; + ste,config = <&gpio_in_nopull>; + }; + janice_cfg2 { + /* Reset, actually completely unused (not routed) */ + pins = "GPIO205_AG23"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* GPIO that enabled the LDO regulator for the LCD display */ + lcd-ldo { + lcd_pwr_en_default_mode: lcd_pwr_en_default { + /* LCD_PWR_EN on GPIO219 */ + janice_cfg1 { + pins = "GPIO219_AG10"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the WLAN internal LDO regulators */ + wlan-ldo { + wlan_ldo_en_default: wlan_ldo_default { + /* GPIO222 BT_VREG_ON */ + janice_cfg1 { + pins = "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Flash and torch */ + flash { + gpio_flash_default_mode: flash_default { + janice_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6"; /* VOL DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for the Atmel MXT228 touchscreen */ + tsp { + tsp_default: tsp_default { + janice_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Reset line for the Yamaha YAS529 magnetometer */ + yas529 { + yas529_default: yas529_janice { + janice_cfg1 { + pins = "GPIO204_AF23"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* Interrupt line for light/proximity sensor GP2AP002 */ + gp2ap002 { + gp2ap002_janice_default: gp2ap002_janice { + janice_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Interrupt line for Invensense MPU3050 gyroscope */ + mpu3050 { + mpu3050_janice_default: mpu3050_janice { + janice_cfg1 { + /* GPIO226 used for IRQ */ + pins = "GPIO226_AF8"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for magnetometer and NCP6914 */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + janice_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the Cypress touchkeys */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + janice_cfg1 { + pins = "GPIO196_AG26", "GPIO197_AH24"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the Immersion ISA1200 */ + i2c-gpio-2 { + i2c_gpio_2_default: i2c_gpio_2 { + janice_cfg1 { + pins = "GPIO201_AF24", "GPIO202_AF25"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the NFC */ + i2c-gpio-3 { + i2c_gpio_3_default: i2c_gpio_3 { + janice_cfg1 { + pins = "GPIO151_D17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based SPI bus for the display */ + spi-gpio-0 { + spi_gpio_0_default: spi_gpio_0 { + janice_cfg1 { + pins = "GPIO220_AH10", "GPIO223_AH9", "GPIO224_AG9"; + ste,config = <&gpio_out_hi>; + }; + /* This pin is unused but belongs with this SPI block */ + janice_cfg2 { + pins = "GPIO225_AG8"; + ste,config = <&in_pd>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + /* GPIO215 used for RESET_N */ + janice_cfg1 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + /* GPIO216 for WL_HOST_WAKE */ + janice_cfg2 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + janice_cfg1 { + pins = "GPIO199_AH23"; + ste,config = <&gpio_out_lo>; + }; + janice_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + janice_cfg3 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* Interrupt line for TI TSU6111 Micro USB switch */ + tsu6111 { + tsu6111_janice_default: tsu6111_janice { + janice_cfg1 { + /* GPIO95 used for IRQ */ + pins = "GPIO95_E8"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + nfc { + pn547_janice_default: pn547_janice { + /* Interrupt line */ + janice_cfg1 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_nopull>; + }; + /* Enable and firmware GPIOs */ + janice_cfg2 { + pins = "GPIO31_V3", "GPIO88_C4"; + ste,config = <&gpio_out_lo>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index b50634c81b44..d28a00757d0b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -8,6 +8,7 @@ #include "ste-ab8505.dtsi" #include "ste-dbx5x0-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -118,6 +119,32 @@ pinctrl-0 = <&gpio_backlight_default_mode>; }; + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + i2c-gpio-0 { compatible = "i2c-gpio"; sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -147,7 +174,7 @@ soc { // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -169,7 +196,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <4>; @@ -196,7 +223,7 @@ }; // eMMC - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; @@ -487,6 +514,14 @@ }; }; }; + flash { + gpio_flash_default_mode: flash_default { + skomer_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; /* GPIO that enables the 2.9V SD card level translator */ sd-level-translator { sd_level_translator_default: sd_level_translator_default { diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ad715a0e1c9a..f6530d724d00 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -566,7 +566,7 @@ }; }; - sdio: sdio@40012c00 { + sdio: mmc@40012c00 { compatible = "arm,pl180", "arm,primecell"; arm,primecell-periphid = <0x00880180>; reg = <0x40012c00 0x400>; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 640ff54ed00c..e1df603fc981 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -473,7 +473,7 @@ status = "disabled"; }; - sdio2: sdio2@40011c00 { + sdio2: mmc@40011c00 { compatible = "arm,pl180", "arm,primecell"; arm,primecell-periphid = <0x00880180>; reg = <0x40011c00 0x400>; @@ -484,7 +484,7 @@ status = "disabled"; }; - sdio1: sdio1@40012c00 { + sdio1: mmc@40012c00 { compatible = "arm,pl180", "arm,primecell"; arm,primecell-periphid = <0x00880180>; reg = <0x40012c00 0x400>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index b083afd0ebd6..4ebffb0a45a3 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -354,7 +354,7 @@ dma-requests = <32>; }; - sdmmc1: sdmmc@52007000 { + sdmmc1: mmc@52007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; reg = <0x52007000 0x1000>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 20a59e8f7a33..7b4249ed1983 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1273,6 +1273,18 @@ }; }; + sdmmc1_b4_init_pins_a: sdmmc1-b4-init-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ @@ -1299,6 +1311,17 @@ }; }; + sdmmc1_dir_init_pins_a: sdmmc1-dir-init-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ @@ -2018,6 +2041,23 @@ }; }; + i2c6_pins_a: i2c6-0 { + pins { + pinmux = <STM32_PINMUX('Z', 6, AF2)>, /* I2C6_SCL */ + <STM32_PINMUX('Z', 7, AF2)>; /* I2C6_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c6_sleep_pins_a: i2c6-sleep-0 { + pins { + pinmux = <STM32_PINMUX('Z', 6, ANALOG)>, /* I2C6_SCL */ + <STM32_PINMUX('Z', 7, ANALOG)>; /* I2C6_SDA */ + }; + }; + spi1_pins_a: spi1-0 { pins1 { pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3c75abacb374..4b8031782555 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1047,7 +1047,7 @@ }; }; - sdmmc3: sdmmc@48004000 { + sdmmc3: mmc@48004000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x48004000 0x400>; @@ -1368,7 +1368,7 @@ status = "disabled"; }; - sdmmc1: sdmmc@58005000 { + sdmmc1: mmc@58005000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x58005000 0x1000>; @@ -1383,7 +1383,7 @@ status = "disabled"; }; - sdmmc2: sdmmc@58007000 { + sdmmc2: mmc@58007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x58007000 0x1000>; @@ -1482,10 +1482,13 @@ usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; compatible = "st,stm32mp1-usbphyc"; reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; resets = <&rcc USBPHY_R>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; status = "disabled"; usbphyc_port0: usb-phy@0 { diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi index 58275bcf9e26..113c48b2ef93 100644 --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -331,12 +331,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 81a7d5849db4..95b08876b2b3 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -393,12 +393,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index cda8e871f999..1e9bf7eea0f1 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -36,34 +36,35 @@ stdout-path = &uart4; }; - led-act { + led-controller-0 { compatible = "gpio-leds"; - led-green { + led-0 { label = "mc1:green:act"; gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; - led-rgb { + led-controller-1 { compatible = "pwm-leds"; - led-red { + /* led-1 to led-3 are part of a single RGB led */ + led-1 { label = "mc1:red:rgb"; pwms = <&leds_pwm 1 1000000 0>; max-brightness = <255>; active-low; }; - led-green { + led-2 { label = "mc1:green:rgb"; pwms = <&leds_pwm 2 1000000 0>; max-brightness = <255>; active-low; }; - led-blue { + led-3 { label = "mc1:blue:rgb"; pwms = <&leds_pwm 3 1000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 5088dd3a301b..fad23d6f69b8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -158,6 +158,4 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 8456f172d4b1..5523f4138fd6 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -300,12 +300,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index 32700cca24c8..cd3a1798ca68 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -36,6 +36,10 @@ status = "disabled"; }; +&fmc { + status = "disabled"; +}; + &gpioa { /* * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable @@ -94,6 +98,10 @@ /delete-property/dma-names; }; +&ksz8851 { + status = "disabled"; +}; + &usart3 { pinctrl-names = "default"; pinctrl-0 = <&usart3_pins_a>; @@ -132,12 +140,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index daff5318f301..2617815e42a6 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -386,20 +386,38 @@ }; &sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-names = "default", "opendrain", "sleep", "init"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + pinctrl-3 = <&sdmmc1_b4_init_pins_a &sdmmc1_dir_init_pins_a>; cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; bus-width = <4>; vmmc-supply = <&vdd_sd>; status = "okay"; }; +&sdmmc1_b4_pins_a { + /* + * SD bus pull-up resistors: + * - optional on SoMs with SD voltage translator + * - mandatory on SoMs without SD voltage translator + */ + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index ec02cee1dd9b..b09e87fe901a 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -391,12 +391,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 89c0e1ddc387..59f18846cf5d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -694,14 +694,10 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &vrefbuf { diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index af8ab736fd3c..20f9ed244851 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label = "a1000:red:usr"; gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; }; - blue { + led-1 { label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 6ca02e824acc..0645d6064235 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -75,12 +75,12 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_cubieboard>; - blue { + led-0 { label = "cubieboard:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ }; - green { + led-1 { label = "cubieboard:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 8ee3ff42bd55..63e77c05bfda 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index ca878384e902..60e432a0ef1c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 8a7b4c53d278..1aeb0bd5519e 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -63,7 +63,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "q5:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index a843e57530ed..81fdb217d339 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -62,22 +62,22 @@ leds { compatible = "gpio-leds"; - red1 { + led-0 { label = "marsboard:red1:usr"; gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; }; - red2 { + led-1 { label = "marsboard:red2:usr"; gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; }; - red3 { + led-2 { label = "marsboard:red3:usr"; gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; }; - red4 { + led-3 { label = "marsboard:red4:usr"; gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 845f76824d57..ad0e25af45be 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -74,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a10-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 83287b6c975e..1ac82376baef 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - tx { + led-0 { label = "pcduino:green:tx"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; }; - rx { + led-1 { label = "pcduino:green:rx"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 24a3d23e1952..c32596947647 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index 64d50fcfcd3a..04b0e6d28769 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -62,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_t003>; - red { + led { label = "t003-tv-dongle:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 8af0eae2ddc1..667bc2dc1ea9 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -62,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_t004>; - red { + led { label = "t004-tv-dongle:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index 6e90ccb267aa..d0219404c231 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -60,7 +60,7 @@ leds { compatible = "gpio-leds"; - red { + led { label = "mk802:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index d6bb82c295f0..5832bb31fc51 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -79,7 +79,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - green { + led { label = "a10s-olinuxino-micro:green:usr"; gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index b2a49a216ebf..964360f0610a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -63,7 +63,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_r7>; - green { + led { label = "r7-tv-dongle:green:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 1f74ba1634cc..ef8baa992687 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -62,7 +62,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "a10s-wobo-i5:blue:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index a23bf24792ec..d059388d7252 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -61,6 +61,7 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; + power-supply = <®_vcc3v3>; /* TODO: backlight uses axp gpio1 as enable pin */ }; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index ba8d75b3c716..2ce361f8fede 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -66,18 +66,18 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label ="licheepi:red:usr"; gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; }; - green { + led-1 { label ="licheepi:green:usr"; gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; default-state = "on"; }; - blue { + led-2 { label ="licheepi:blue:usr"; gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 5df398d77238..bfe1075e62cc 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -64,7 +64,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinom>; - power { + led { label = "a13-olinuxino-micro:green:power"; gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 39101228a755..fadeae3cd8bb 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -66,7 +66,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - power { + led { gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts index e9ef97c9c893..d60407772e5d 100644 --- a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts +++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts @@ -28,6 +28,7 @@ enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; + power-supply = <®_vcc3v3>; }; chosen { @@ -37,7 +38,7 @@ leds { compatible = "gpio-leds"; - power { + led { gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ default-state = "on"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index ae04955fd9a3..7075e10911d5 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -48,7 +48,7 @@ / { thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 4c20d731a9c6..f4fe258ef06d 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -71,7 +71,7 @@ compatible = "pwm-backlight"; pwms = <&pwm 0 10000 0>; enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; - + power-supply = <®_vcc3v3>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; }; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 1a9926d71410..6847f66699ac 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -55,6 +55,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */ + power-supply = <®_vcc3v0>; }; chosen { diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index c2b4fbf552a3..250d6b87ab4d 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -726,6 +726,18 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, <70>, <71>, <72>, <73>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <320000000>; + }; + timer@1c60000 { compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 73de34ae37fd..486cec6f71e0 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -226,7 +226,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 6cc8ccf53d88..744723d956f0 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -72,7 +72,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "i7:blue:usr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index a645c8f4257c..e4f3415e6108 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -61,7 +61,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -115,7 +115,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 648f24746234..7bd4bdd66a76 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -61,7 +61,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -115,7 +115,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f3425a66fc0a..a75033e85fcb 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -165,7 +165,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -1305,7 +1305,7 @@ clock-output-names = "osc32k"; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index bc3170a0b8b5..66bc6ca77afb 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -115,7 +115,6 @@ reg = <0x1c>; interrupt-parent = <&pio>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ - #io-channel-cells = <1>; }; }; @@ -159,7 +158,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index 3099491de8c4..7455c0db4a8a 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -78,7 +78,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 708caee52425..efb25b949f30 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -59,17 +59,17 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bpi-m2:blue:usr"; gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ }; - green { + led-1 { label = "bpi-m2:green:usr"; gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ }; - red { + led-2 { label = "bpi-m2:red:usr"; gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ }; @@ -148,7 +148,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; @@ -261,3 +261,74 @@ &usbphy { status = "okay"; }; + +&pio { + gpio-line-names = + /* PA */ + "ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "", + "", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1", + "ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK", + "ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC", + "EMDIO", "", "", "", "", + + /* PB */ + "CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37", + "CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", + + /* PC */ + "", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK", + "WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "USB-DRV", "", "", "", "", + + /* PD */ + "CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17", + "CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27", + "CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37", + "CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34", + "CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22", + "CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "", + + /* PE */ + "CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08", + "CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19", + "CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29", + "CN6-P31", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", + + /* PF */ + "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", + "SDC0-D2", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", + + /* PG */ + "CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07", + "LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15", + "LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23", + "CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "", + "", "", "", "", "", "", "", "", "", + + /* PH */ + "", "", "", "", "", "", "", "", "", "CN7-P07", + "CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16", + "CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03", + "CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32", + "CN6-P26", "CN6-P18", "", "", "", ""; +}; + +&r_pio { + gpio-line-names = + /* PL */ + "PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX", + "WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE", + "WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + + /* PM */ + "CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", ""; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 2504e7189c54..cadc45255d7b 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -98,7 +98,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 7de2abd541c1..6bf3fbdd738f 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -79,7 +79,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 8945dbb114a2..caa935ca4f19 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "bananapi-m1-plus:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; - pwr { + led-1 { label = "bananapi-m1-plus:pwr:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 0b3d9ae75650..9d792d7a0f92 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -77,7 +77,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "bananapi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 5740f9442705..e22f0e8bb17a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapro:blue:usr"; gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapro:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index b8203e4ef21c..e35e6990c4b2 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -75,12 +75,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubieboard2:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "cubieboard2:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 9109ca0919ad..52160e368304 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -75,22 +75,22 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; - orange { + led-1 { label = "cubietruck:orange:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; - white { + led-2 { label = "cubietruck:white:usr"; gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; }; - green { + led-3 { label = "cubietruck:green:usr"; gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 358ed5f1b1c1..b21ddd0ec1c2 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -62,12 +62,12 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label = "i12_tvbox:red:usr"; gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; }; - blue { + led-1 { label = "i12_tvbox:blue:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 946c27278321..8ff83016ff5a 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -53,13 +53,13 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_itead_core>; - green { + led-0 { label = "itead_core:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - blue { + led-1 { label = "itead_core:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 17fa8901fc00..97518afe4658 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -75,7 +75,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "lamobo_r1:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 6bff9e731fc3..f161d5238860 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -64,7 +64,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "m3:blue:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 6f9c54b8e49a..f05ee32bc9cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -75,7 +75,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "a20-olimex-som-evb:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 230d62a6b8f1..54af6c18075b 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -46,19 +46,19 @@ leds { compatible = "gpio-leds"; - stat { + led-0 { label = "a20-som204-evb:green:stat"; gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led1 { + led-1 { label = "a20-som204-evb:green:led1"; gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led2 { + led-2 { label = "a20-som204-evb:yellow:led2"; gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 2adbac860119..92938d022295 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 9ba62774e89a..8077f1716fbc 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime2:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 359bd0d5b3b1..a1b89b2a2999 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - green { + led { label = "a20-olinuxino-micro:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 2e328d2cefc1..84efa01e7cba 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -75,12 +75,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "orangepi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ }; - blue { + led-1 { label = "orangepi:blue:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index d75b2e2bab28..5d77f1d9818f 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -64,7 +64,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "orangepi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index bf38c66c1815..e40ecb48d726 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -72,14 +72,12 @@ leds { compatible = "gpio-leds"; - /* Marked "LED3" on the PCB. */ - usr1 { + led-3 { label = "pcduino3-nano:green:usr1"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */ }; - /* Marked "LED4" on the PCB. */ - usr2 { + led-4 { label = "pcduino3-nano:green:usr2"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index cc8271d777b8..4f8d55d3ba79 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -64,12 +64,12 @@ leds { compatible = "gpio-leds"; - tx { + led-0 { label = "pcduino3:green:tx"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; }; - rx { + led-1 { label = "pcduino3:green:rx"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 6a66b0432dfa..fef02fcbbdf8 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -64,6 +64,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 6d6a37940db2..5a40e0280665 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -140,7 +140,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index c1362d0f0ff8..a42fac676b31 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -716,7 +716,7 @@ #clock-cells = <1>; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index 317763069c0a..065cb620aa99 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -63,7 +63,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_d978>; - home { + led { label = "d978:blue:home"; gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index a1953b2872d0..8538514c8588 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -62,7 +62,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "a33-olinuxino:green:usr"; gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; }; @@ -98,7 +98,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 785798e3a104..d54a067fc76e 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,6 +63,7 @@ panel { compatible = "netron-dy,e231732"; + power-supply = <®_vcc3v3>; port { panel_input: endpoint { @@ -164,7 +165,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index c458f5fb124f..7344c37107c6 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -288,7 +288,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 431f70234d36..b60016a4429c 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapi-m3:blue:usr"; gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapi-m3:green:usr"; gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index d8326a5c681d..e26af7cf10e0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -74,22 +74,22 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck-plus:blue:usr"; gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ }; - orange { + led-1 { label = "cubietruck-plus:orange:usr"; gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ }; - white { + led-2 { label = "cubietruck-plus:white:usr"; gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ }; - green { + led-3 { label = "cubietruck-plus:green:usr"; gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ }; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index bfc9bb277a49..83b01b03e08e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -65,7 +65,7 @@ compatible = "pwm-backlight"; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; - + power-supply = <®_sw>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; default-brightness-level = <9>; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index c010b27fdb6a..bd898b250e74 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -1061,9 +1061,6 @@ clock-names = "bus", "mod", "ram"; resets = <&ccu RST_BUS_CSI>; status = "disabled"; - - csi_in: port { - }; }; hdmi: hdmi@1ee0000 { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index e76d56a3df9c..f3f7a2c912ab 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -62,6 +62,35 @@ states = <1100000 0>, <1300000 1>; }; + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + poweroff { + compatible = "regulator-poweroff"; + cpu-supply = <®_vcc1v2>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ @@ -125,6 +154,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; clocks = <&rtc 1>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 45a24441ff18..62b5280ec093 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -75,13 +75,13 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "beelink-x2:blue:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; - red { + led-1 { label = "beelink-x2:red:standby"; gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts index 6b149271ef13..8e7dfcffe1fb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -25,13 +25,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:red:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; - status { + led-1 { label = "nanopi:green:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index 07867a0d569b..be49eabbff94 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -61,13 +61,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; - status { + led-1 { label = "nanopi:blue:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts index 204a39f93f4e..26e2e6172e0d 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts @@ -39,8 +39,8 @@ regulator-ramp-delay = <50>; gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0x0>, + <1300000 0x1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index 4df29a65316d..c7c3e7d8b3c8 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -60,13 +60,13 @@ leds { compatible = "gpio-leds"; - status { + led-0 { label = "nanopi:blue:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pwr { + led-1 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index 251bbab7d707..561ea1d2f861 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -73,13 +73,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index e1c75f7fa3ca..293016d081cd 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -64,17 +64,17 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bpi-m2m:blue:usr"; gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; }; - green { + led-1 { label = "bpi-m2m:green:usr"; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; }; - red { + led-2 { label = "bpi-m2m:red:power"; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; default-state = "on"; @@ -163,7 +163,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 4f48eec6b2ef..2be1b76fe2f6 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -64,14 +64,14 @@ leds { compatible = "gpio-leds"; - led1 { + led-1 { label = "parrot:led1:usr"; - gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ }; - led2 { + led-2 { label = "parrot:led2:usr"; - gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ }; }; @@ -164,7 +164,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 7907569e7b5c..d5ad3b9efd12 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -190,6 +190,25 @@ }; }; + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-r40-deinterlace", + "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + /* + * NOTE: Contrary to what datasheet claims, + * DRAM deinterlace gate doesn't exist and + * it's shared with CSI1. + */ + <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-r40-system-control", "allwinner,sun4i-a10-system-control"; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index b3d8b8f056cd..797d61cff11e 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -54,6 +54,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + power-supply = <®_dc1sw>; }; chosen { @@ -92,7 +93,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; drivevbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi index 24d507cdbcf9..052b010a5607 100644 --- a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi @@ -39,6 +39,6 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts index 4aa0ee897a0a..20966e954eda 100644 --- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -64,9 +64,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - csi1_ep: endpoint { remote-endpoint = <&ov5640_ep>; bus-width = <8>; @@ -88,13 +85,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp203", - "x-powers,axp209"; reg = <0x34>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts new file mode 100644 index 000000000000..117aeece4e55 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2020 Paul Kocialkowski <contact@paulk.fr> + */ + +#include "sun8i-v3-sl631.dtsi" + +/ { + model = "SL631 Action Camera with IMX179"; + compatible = "allwinner,sl631-imx179", "allwinner,sl631", + "allwinner,sun8i-v3"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi new file mode 100644 index 000000000000..e0d2a31efc7f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2020 Paul Kocialkowski <contact@paulk.fr> + */ + +/dts-v1/; + +#include "sun8i-v3.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "SL631 Action Camera"; + compatible = "allwinner,sl631", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pb_pins>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-174 { + label = "Down"; + linux,code = <KEY_DOWN>; + channel = <0>; + voltage = <174603>; + }; + + button-384 { + label = "Up"; + linux,code = <KEY_UP>; + channel = <0>; + voltage = <384126>; + }; + + button-593 { + label = "OK"; + linux,code = <KEY_OK>; + channel = <0>; + voltage = <593650>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + vmmc-supply = <®_dcdc3>; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_dcdc3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pg_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index f8f19d8fa795..eb4cb63fef13 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -157,12 +157,21 @@ syscon: system-control@1c00000 { compatible = "allwinner,sun8i-v3s-system-control", "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x1000>; + reg = <0x01c00000 0xd0>; #address-cells = <1>; #size-cells = <1>; ranges; }; + nmi_intc: interrupt-controller@1c000d0 { + compatible = "allwinner,sun8i-v3s-nmi", + "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c000d0 0x0c>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -329,6 +338,12 @@ #interrupt-cells = <3>; /omit-if-no-ref/ + csi0_mclk_pin: csi0-mclk-pin { + pins = "PE20"; + function = "csi_mipi"; + }; + + /omit-if-no-ref/ csi1_8bit_pins: csi1-8bit-pins { pins = "PE0", "PE2", "PE3", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 484b93df20cb..1fe251ea94bc 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "cubieboard4:green:usr"; gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */ }; - red { + led-1 { label = "cubieboard4:red:usr"; gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 8e5cb3b3fd68..7a6af54dd342 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -219,6 +219,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; clocks = <&rtc 1>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 74da1360d297..0368b3b816ef 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -4352,8 +4352,8 @@ nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pcc1 { nvidia,pins = "pcc1"; diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts new file mode 100644 index 000000000000..b0b836aedd76 --- /dev/null +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Michael Walle <michael@walle.cc> + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Ebang EBAZ4205"; + compatible = "ebang,ebaz4205", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; + fclk-enable = <8>; +}; + +&gem0 { + status = "okay"; + phy-mode = "mii"; + phy-handle = <&phy>; + + /* PHY clock */ + assigned-clocks = <&clkc 18>; + assigned-clock-rates = <25000000>; + + phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&pinctrl0 { + pinctrl_gpio0_default: gpio0-default { + mux { + groups = "gpio0_20_grp", "gpio0_32_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_20_grp", "gpio0_32_grp"; + io-standard = <3>; + slew-rate = <0>; + }; + + conf-pull-up { + pins = "MIO20", "MIO32"; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + io-standard = <3>; + slew-rate = <0>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_34_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_34_grp"; + io-standard = <3>; + slew-rate = <0>; + bias-high-impedance; + bias-pull-up; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_4_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_4_grp"; + io-standard = <3>; + slew-rate = <0>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 88fdf6fc7569..17b56f3fa2df 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -13,6 +13,11 @@ config ARCH_AGILEX help This enables support for Intel's Agilex SoCFPGA Family. +config ARCH_N5X + bool "Intel's eASIC N5X SoCFPGA Family" + help + This enables support for Intel's eASIC N5X SoCFPGA Family. + config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 211d1e9d4701..41ce680e5f8d 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index e5e840b9fbb4..f7fe9fa50cb3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -36,18 +36,18 @@ leds { compatible = "gpio-leds"; - pwr-led { + led-0 { label = "bananapi-m64:red:pwr"; gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ default-state = "on"; }; - green { + led-1 { label = "bananapi-m64:green:user"; gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ }; - blue { + led-2 { label = "bananapi-m64:blue:user"; gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index e58db8a6cab6..09b3c7fb82c0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "nanopi-a64:blue:status"; gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts index 302e24be0a31..437ffe3628a5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -1,10 +1,21 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (c) 2018 ARM Ltd. +#include <dt-bindings/leds/common.h> #include "sun50i-a64-sopine-baseboard.dts" / { model = "Pine64 LTS"; compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", "allwinner,sun50i-a64"; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 896f34fd9fc3..7ae16541d14f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -126,8 +126,6 @@ }; &ehci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -169,6 +167,7 @@ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; + max-frequency = <200000000>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -177,8 +176,6 @@ }; &ohci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts index 3d5a2ae9aa39..fb65319a3bd3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone Developer Batch (1.0)"; - compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64"; }; &sgm3140 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index c9b9f6e9ee8c..5e59d3752178 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone Braveheart (1.1)"; - compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64"; }; &backlight { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts index acc0ab53b9c1..4e7e237cb46a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone (1.2)"; - compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64"; wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 2dfe9bae8c67..9f69d489a81d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -21,6 +21,7 @@ compatible = "pwm-backlight"; pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + power-supply = <®_ps>; /* Backlight configuration differs per PinePhone revision. */ }; @@ -31,25 +32,33 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_BLUE>; gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ }; - green { + led-1 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ }; - red { + led-2 { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_RED>; gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ }; }; + reg_ps: ps-regulator { + compatible = "regulator-fixed"; + regulator-name = "ps"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + reg_vbat_wifi: vbat-wifi { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -174,8 +183,6 @@ reg = <0x48>; interrupt-parent = <&pio>; interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ - vdd-supply = <®_ldo_io0>; - leda-supply = <®_dldo1>; }; /* Accelerometer/gyroscope */ @@ -196,6 +203,7 @@ &lradc { vref-supply = <®_aldo3>; + wakeup-source; status = "okay"; button-200 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts new file mode 100644 index 000000000000..6265360ce623 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io> + * + */ + +/dts-v1/; + +#include "sun50i-a64-pinetab.dts" + +/ { + model = "PineTab, Early Adopter's version"; + compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64"; +}; + +&dsi { + /delete-node/ panel@0; + + panel@0 { + compatible = "feixin,k101-im2byl02", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_dc1sw>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + backlight = <&backlight>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index 0494bfaf2ffa..422a8507f674 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -14,7 +14,7 @@ #include <dt-bindings/pwm/pwm.h> / { - model = "PineTab"; + model = "PineTab, Development Sample"; compatible = "pine64,pinetab", "allwinner,sun50i-a64"; aliases { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index d4069749d721..e22b94c83647 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -111,6 +111,7 @@ bus-width = <8>; non-removable; cap-mmc-hw-reset; + mmc-hs200-1_8v; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index c48692b06e1f..3402cec87035 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -32,7 +32,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index a1864a89fb89..f0a16f355e27 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -52,12 +52,12 @@ leds { compatible = "gpio-leds"; - capslock { + led-0 { label = "teres-i:green:capslock"; gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ }; - numlock { + led-1 { label = "teres-i:green:numlock"; gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 51cc30e84e26..57786fc120c3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -514,7 +514,7 @@ resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - max-frequency = <200000000>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -593,6 +593,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -603,6 +605,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 9d93fe153689..4c3921ac236c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -25,13 +25,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "nanopi:red:status"; gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index b059e20813bd..02f8e72f0cad 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -22,13 +22,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "nanopi:blue:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 8bf2db9dcbda..1010c1b22d2e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -42,13 +42,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index 33ab44072e6d..74e0444af19b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -36,13 +36,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts index ef5ca6444220..d13980ed7a79 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -33,13 +33,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index de19e68eb84e..22530ace12d5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -33,13 +33,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 10489e508695..578a63dedf46 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -121,6 +121,19 @@ resets = <&ccu RST_BUS_CE>; }; + deinterlace: deinterlace@1e00000 { + compatible = "allwinner,sun8i-h3-deinterlace"; + reg = <0x01e00000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 7c9dbde645b5..4f4755152fce 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -43,7 +43,7 @@ leds { compatible = "gpio-leds"; - power { + led { label = "beelink:white:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi index 1a5eddc5a40f..8c6e8536b69f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi @@ -8,7 +8,7 @@ nvmem-cells = <&cpu_speed_grade>; opp-shared; - opp@480000000 { + opp-480000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <480000000>; @@ -17,7 +17,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@720000000 { + opp-720000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <720000000>; @@ -26,7 +26,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@816000000 { + opp-816000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <816000000>; @@ -35,7 +35,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@888000000 { + opp-888000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <888000000>; @@ -44,7 +44,7 @@ opp-microvolt-speed2 = <820000 820000 1200000>; }; - opp@1080000000 { + opp-1080000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1080000000>; @@ -53,7 +53,7 @@ opp-microvolt-speed2 = <880000 880000 1200000>; }; - opp@1320000000 { + opp-1320000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1320000000>; @@ -62,7 +62,7 @@ opp-microvolt-speed2 = <940000 940000 1200000>; }; - opp@1488000000 { + opp-1488000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1488000000>; @@ -71,7 +71,7 @@ opp-microvolt-speed2 = <1000000 1000000 1200000>; }; - opp@1608000000 { + opp-1608000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1608000000>; @@ -80,7 +80,7 @@ opp-microvolt-speed2 = <1030000 1030000 1200000>; }; - opp@1704000000 { + opp-1704000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1704000000>; @@ -89,7 +89,7 @@ opp-microvolt-speed2 = <1060000 1060000 1200000>; }; - opp@1800000000 { + opp-1800000000 { clock-latency-ns = <244144>; /* 8 32k periods */ opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 15c9dd8c4479..7e83f6146f8a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -43,13 +43,13 @@ leds { compatible = "gpio-leds"; - power { + led-0 { label = "orangepi:red:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:green:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index ebc120a9232f..da0875bd38d4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -42,13 +42,13 @@ leds { compatible = "gpio-leds"; - power { + led-0 { label = "orangepi:red:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:green:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts index 7fea1e4e2d49..686f58e77004 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts @@ -34,3 +34,18 @@ non-removable; status = "okay"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 961732c52aa0..b868ad17af8f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -44,17 +44,17 @@ leds { compatible = "gpio-leds"; - heartbeat { + led-0 { label = "pine-h64:green:heartbeat"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ }; - link { + led-1 { label = "pine-h64:white:link"; gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */ }; - status { + led-2 { label = "pine-h64:blue:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; @@ -142,6 +142,7 @@ vqmmc-supply = <®_bldo2>; non-removable; cap-mmc-hw-reset; + mmc-hs200-1_8v; bus-width = <8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 8a62a9fbe347..49e979794094 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -436,6 +436,7 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -452,6 +453,7 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -468,6 +470,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -680,6 +683,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usb2phy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -690,6 +695,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usb2phy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -949,6 +956,11 @@ pins = "PL9"; function = "s_cir_rx"; }; + + r_rsb_pins: r-rsb-pins { + pins = "PL0", "PL1"; + function = "s_rsb"; + }; }; r_ir: ir@7040000 { @@ -979,6 +991,20 @@ #size-cells = <0>; }; + r_rsb: rsb@7083000 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x07083000 0x400>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 13>; + clock-frequency = <3000000>; + resets = <&r_ccu 7>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ths: thermal-sensor@5070400 { compatible = "allwinner,sun50i-h6-ths"; reg = <0x05070400 0x100>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 0f893984c256..d301ac0d406b 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -203,7 +203,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <24>; + ngpios = <24>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -223,7 +223,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <24>; + ngpios = <24>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index ced03946314f..78a569d7fa20 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb @@ -44,7 +45,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index b00d0468c753..81269ccc2496 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -181,7 +181,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12A-SEI510"; + model = "SEI510"; audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_a>, <&tdmin_b>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 463a72d6bb7c..579f3d02d613 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -150,7 +150,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12A-X96-MAX"; + model = "X96-MAX"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts new file mode 100644 index 000000000000..211191f66344 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-w400.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "azw,gsking-x", "amlogic,g12b"; + model = "Beelink GS-King X"; + + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "GSKING-X"; + audio-aux-devs = <&tdmout_a>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1", + "TDMOUT_A IN 1", "FRDDR_B OUT 1", + "TDMOUT_A IN 2", "FRDDR_C OUT 1", + "TDM_A Playback", "TDMOUT_A OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 0e5c500fb78f..0e331aa5a2d7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -44,7 +44,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-GTKING-PRO"; + model = "GTKING-PRO"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 10b87eb97b14..a7db84a500bb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -28,7 +28,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-GTKING"; + model = "GTKING"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 39a09661c5f6..58ce569b2ace 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -13,6 +13,8 @@ aliases { serial0 = &uart_AO; ethernet0 = ðmac; + rtc0 = &rtc; + rtc1 = &vrtc; }; dioo2133: audio-amplifier-0 { @@ -211,7 +213,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-ODROID-N2"; + model = "ODROID-N2"; audio-widgets = "Line", "Lineout"; audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, @@ -478,6 +480,18 @@ linux,rc-map-name = "rc-odroid"; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + &pwm_ab { pinctrl-0 = <&pwm_a_e_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index b57bb0befc69..0c7892600d56 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -23,7 +23,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-UGOOS-AM6"; + model = "UGOOS-AM6"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index c2480bab8d33..2d7032f41e4b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -186,7 +186,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S9XX-PC"; + model = "LIBRETECH-PC"; audio-aux-devs = <&dio2133>; audio-widgets = "Speaker", "7J4-14 LEFT", "Speaker", "7J4-11 RIGHT"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 6b57e15aade3..dafc841f7c16 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -121,7 +121,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GX-P230-Q200"; + model = "P230-Q200"; audio-aux-devs = <&dio2133>; audio-widgets = "Line", "Lineout"; audio-routing = "AU2 INL", "ACODEC LOLP", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 089e0636ba8a..7273eed5292c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -134,7 +134,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-NANOPI-K2"; + model = "NANOPI-K2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index b5b11cb9f393..f887bfb445fd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -143,7 +143,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-NEXBOX-A95X"; + model = "NEXBOX-A95X"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c04ef57f7b3b..bfaf7f41a2d6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -176,7 +176,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-ODROID-C2"; + model = "ODROID-C2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 0c1570153842..58733017eda8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -15,7 +15,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-WETEK-HUB"; + model = "WETEK-HUB"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index f2562c7de67c..6eae692792ec 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -50,7 +50,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXBB-WETEK-PLAY2"; + model = "WETEK-PLAY2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 9e43f4dca90d..2d769203f671 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -118,7 +118,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S805X-AC"; + model = "LIBRETECH-AC"; audio-widgets = "Speaker", "9J5-3 LEFT", "Speaker", "9J5-2 RIGHT"; audio-routing = "9J5-3 LEFT", "ACODEC LOLN", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 6fe589cd2ba2..60feac0179c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -42,10 +42,10 @@ }; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - power { + led-1 { label = "vim:red:power"; pwms = <&pwm_AO_ab 1 7812500 0>; max-brightness = <255>; @@ -66,7 +66,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-KHADAS-VIM1"; + model = "KHADAS-VIM"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 9a3c08e6e6cc..93d8f8aff70d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -159,7 +159,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S905X-CC-V2"; + model = "LIBRETECH-CC-V2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 5ae7bb6209cb..82bfabfbd39c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -135,7 +135,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXL-LIBRETECH-S905X-CC"; + model = "LIBRETECH-CC"; audio-aux-devs = <&dio2133>; audio-widgets = "Line", "Lineout"; audio-routing = "AU2 INL", "ACODEC LOLN", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index bf9877d33427..18a4b7a6c5df 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -81,10 +81,10 @@ }; }; - pwmleds { + led-controller { compatible = "pwm-leds"; - power { + led-1 { label = "vim:red:power"; pwms = <&pwm_AO_ab 1 7812500 0>; max-brightness = <255>; @@ -148,7 +148,7 @@ sound { compatible = "amlogic,gx-sound-card"; - model = "GXM-KHADAS-VIM2"; + model = "KHADAS-VIM2"; assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 8f8656262ae7..877e3b989203 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -170,7 +170,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12B-KHADAS-VIM3"; + model = "KHADAS-VIM3"; audio-aux-devs = <&tdmout_a>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", "TDMOUT_A IN 1", "FRDDR_B OUT 0", @@ -283,12 +283,12 @@ }; ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; }; &frddr_a { @@ -354,9 +354,9 @@ }; &pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; }; &saradc { @@ -450,7 +450,6 @@ }; }; - &tdmif_a { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 4b517ca72059..06de0b1ce726 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -89,13 +89,12 @@ status = "okay"; }; -&sd_emmc_a { - sd-uhs-sdr50; -}; - &usb { phys = <&usb2_phy0>, <&usb2_phy1>; phy-names = "usb2-phy0", "usb2-phy1"; }; */ +&sd_emmc_a { + sd-uhs-sdr50; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index a712273c905a..b2a4e823c1d8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -5,34 +5,12 @@ /dts-v1/; -#include "meson-sm1.dtsi" -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include "meson-sm1-odroid.dtsi" / { compatible = "hardkernel,odroid-c4", "amlogic,sm1"; model = "Hardkernel ODROID-C4"; - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - leds { compatible = "gpio-leds"; @@ -45,96 +23,6 @@ }; }; - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - hub_5v: regulator-hub_5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; @@ -147,215 +35,12 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - sound { - compatible = "amlogic,axg-sound-card"; - model = "SM1-ODROID-C4"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + model = "ODROID-C4"; }; }; -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", - "PIN_36", /* GPIOH_5 */ - "PIN_26", /* GPIOH_6 */ - "PIN_32", /* GPIOH_7 */ - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_7", /* GPIOX_5 */ - "PIN_33", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_35"; /* GPIOX_19 */ - /* * WARNING: The USB Hub on the Odroid-C4 needs a reset signal * to be turned high in order to be detected by the USB Controller @@ -370,120 +55,10 @@ }; }; -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "", "", "", "", - "PIN_47", /* GPIOAO_4 */ - "", "", - "PIN_45", /* GPIOAO_7 */ - "PIN_46", /* GPIOAO_8 */ - "PIN_44", /* GPIOAO_9 */ - "PIN_42", /* GPIOAO_10 */ - "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - &ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; linux,rc-map-name = "rc-odroid"; }; -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <200000000>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - &usb2_phy1 { /* Enable the hub which is connected to this port */ phy-supply = <&hub_5v>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts new file mode 100644 index 000000000000..bf15700c4b15 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> + */ + +/dts-v1/; + +#include "meson-sm1-odroid.dtsi" + +/ { + compatible = "hardkernel,odroid-hc4", "amlogic,sm1"; + model = "Hardkernel ODROID-HC4"; + + aliases { + rtc0 = &rtc; + rtc1 = &vrtc; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-min-state = <0>; + cooling-max-state = <3>; + cooling-levels = <0 120 170 220>; + pwms = <&pwm_cd 1 40000 0>; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + + led-red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + sound { + model = "ODROID-HC4"; + }; +}; + +&cpu_thermal { + cooling-maps { + map { + trip = <&cpu_passive>; + cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&ir { + linux,rc-map-name = "rc-odroid"; +}; + +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + status = "okay"; + compatible = "nxp,pcf8563"; + reg = <0x51>; + wakeup-source; + }; +}; + +&pcie { + status = "okay"; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; +}; + +&pwm_cd { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_d_x6_pins>; +}; + +&sd_emmc_c { + status = "disabled"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi new file mode 100644 index 000000000000..d14716b3d0f1 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> + */ + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "", + "PIN_36", /* GPIOH_5 */ + "PIN_26", /* GPIOH_6 */ + "PIN_32", /* GPIOH_7 */ + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "", "", + /* GPIOA */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", + "PIN_27", /* GPIOA_14 */ + "PIN_28", /* GPIOA_15 */ + /* GPIOX */ + "PIN_16", /* GPIOX_0 */ + "PIN_18", /* GPIOX_1 */ + "PIN_22", /* GPIOX_2 */ + "PIN_11", /* GPIOX_3 */ + "PIN_13", /* GPIOX_4 */ + "PIN_7", /* GPIOX_5 */ + "PIN_33", /* GPIOX_6 */ + "PIN_15", /* GPIOX_7 */ + "PIN_19", /* GPIOX_8 */ + "PIN_21", /* GPIOX_9 */ + "PIN_24", /* GPIOX_10 */ + "PIN_23", /* GPIOX_11 */ + "PIN_8", /* GPIOX_12 */ + "PIN_10", /* GPIOX_13 */ + "PIN_29", /* GPIOX_14 */ + "PIN_31", /* GPIOX_15 */ + "PIN_12", /* GPIOX_16 */ + "PIN_3", /* GPIOX_17 */ + "PIN_5", /* GPIOX_18 */ + "PIN_35"; /* GPIOX_19 */ +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "", "", "", "", + "PIN_47", /* GPIOAO_4 */ + "", "", + "PIN_45", /* GPIOAO_7 */ + "PIN_46", /* GPIOAO_8 */ + "PIN_44", /* GPIOAO_9 */ + "PIN_42", /* GPIOAO_10 */ + "", + /* GPIOE */ + "", "", ""; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 5ab139a34c01..2194a778973f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -101,20 +101,20 @@ }; }; - leds { + led-controller-1 { compatible = "gpio-leds"; - led-bluetooth { + led-1 { label = "sei610:blue:bt"; gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; default-state = "off"; }; }; - pwmleds { + led-controller-2 { compatible = "pwm-leds"; - power { + led-2 { label = "sei610:red:power"; pwms = <&pwm_AO_ab 0 30518 0>; max-brightness = <255>; @@ -220,7 +220,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "SM1-SEI610"; + model = "SEI610"; audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_a>, <&tdmin_b>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile index ef26c23603ce..ebebc0cd421f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile +++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts new file mode 100644 index 000000000000..ee3ed612274c --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "bcm4906.dtsi" + +/ { + compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908"; + model = "Netgear R8000P"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + wps { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nandcs { + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "cferom"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "firmware"; + reg = <0x100000 0x4400000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi new file mode 100644 index 000000000000..66023d553524 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "bcm4908.dtsi" + +/ { + cpus { + /delete-node/ cpu@2; + + /delete-node/ cpu@3; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 13c6b86eef21..6e4ad66ff536 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -44,6 +44,57 @@ }; }; +&ports { + port@0 { + label = "lan2"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan6"; + }; + + port@3 { + label = "lan5"; + }; + + /* External BCM53134S switch */ + port@7 { + label = "sw"; + reg = <7>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; +}; + +&mdio { + /* lan8 */ + ethernet-phy@0 { + reg = <0>; + }; + + /* lan7 */ + ethernet-phy@1 { + reg = <1>; + }; + + /* lan4 */ + ethernet-phy@2 { + reg = <2>; + }; + + /* lan3 */ + ethernet-phy@3 { + reg = <3>; + }; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index f873dc44ce9c..9354077f74cd 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -108,7 +108,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00 0x00 0x80000000 0x10000>; + ranges = <0x00 0x00 0x80000000 0x281000>; usb@c300 { compatible = "generic-ehci"; @@ -130,6 +130,104 @@ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + ethernet-switch@80000 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0 0x80000 0x50000>; + + ethernet-switch@0 { + compatible = "brcm,bcm4908-switch"; + reg = <0x0 0x40000>, + <0x40000 0x110>, + <0x40340 0x30>, + <0x40380 0x30>, + <0x40600 0x34>, + <0x40800 0x208>; + reg-names = "core", "reg", "intrl2_0", + "intrl2_1", "fcb", "acb"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + brcm,num-gphy = <5>; + brcm,num-rgmii-ports = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "internal"; + phy-handle = <&phy8>; + }; + + port@1 { + reg = <1>; + phy-mode = "internal"; + phy-handle = <&phy9>; + }; + + port@2 { + reg = <2>; + phy-mode = "internal"; + phy-handle = <&phy10>; + }; + + port@3 { + reg = <3>; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + }; + }; + + mdio: mdio@405c0 { + compatible = "brcm,unimac-mdio"; + reg = <0x405c0 0x8>; + reg-names = "mdio"; + #size-cells = <0>; + #address-cells = <1>; + + phy8: ethernet-phy@8 { + reg = <8>; + }; + + phy9: ethernet-phy@9 { + reg = <9>; + }; + + phy10: ethernet-phy@a { + reg = <10>; + }; + + phy11: ethernet-phy@b { + reg = <11>; + }; + + phy12: ethernet-phy@c { + reg = <12>; + }; + }; + }; + + procmon: syscon@280000 { + compatible = "simple-bus"; + reg = <0x280000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + power-controller@2800c0 { + compatible = "brcm,bcm4908-pmb"; + reg = <0x2800c0 0x40>; + #power-domain-cells = <1>; + }; + }; }; bus@ff800000 { @@ -164,7 +262,7 @@ nand@1800 { #address-cells = <1>; #size-cells = <0>; - compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; reg = <0x1800 0x600>, <0x2000 0x10>; reg-names = "nand", "nand-int-base"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -177,6 +275,21 @@ }; }; + misc@2600 { + compatible = "brcm,misc", "simple-mfd"; + reg = <0x2600 0xe4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x2600 0xe4>; + + reset-controller@2644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0x44 0x04>; + #reset-cells = <1>; + }; + }; + reboot { compatible = "syscon-reboot"; regmap = <&timer>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 43aa5e9c0020..8fe7325cfbb2 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -56,70 +56,6 @@ }; }; -&sata0 { - status = "okay"; -}; - -&sata_phy0{ - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&sata_phy1{ - status = "okay"; -}; - -&sata2 { - status = "okay"; -}; - -&sata_phy2{ - status = "okay"; -}; - -&sata3 { - status = "okay"; -}; - -&sata_phy3{ - status = "okay"; -}; - -&sata4 { - status = "okay"; -}; - -&sata_phy4{ - status = "okay"; -}; - -&sata5 { - status = "okay"; -}; - -&sata_phy5{ - status = "okay"; -}; - -&sata6 { - status = "okay"; -}; - -&sata_phy6{ - status = "okay"; -}; - -&sata7 { - status = "okay"; -}; - -&sata_phy7{ - status = "okay"; -}; - &pwm { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi deleted file mode 100644 index 8c68e0c26f1b..000000000000 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi +++ /dev/null @@ -1,278 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2016-2017 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - sata { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x67d00000 0x00800000>; - - sata0: ahci@0 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00000000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0_port0: sata-port@0 { - reg = <0>; - phys = <&sata0_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy0: sata_phy@2100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00002100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata1: ahci@10000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00010000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata1_port0: sata-port@0 { - reg = <0>; - phys = <&sata1_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy1: sata_phy@12100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00012100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata1_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata2: ahci@20000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00020000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata2_port0: sata-port@0 { - reg = <0>; - phys = <&sata2_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy2: sata_phy@22100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00022100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata2_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata3: ahci@30000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00030000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata3_port0: sata-port@0 { - reg = <0>; - phys = <&sata3_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy3: sata_phy@32100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00032100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata3_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata4: ahci@100000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00100000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata4_port0: sata-port@0 { - reg = <0>; - phys = <&sata4_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy4: sata_phy@102100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00102100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata4_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata5: ahci@110000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00110000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata5_port0: sata-port@0 { - reg = <0>; - phys = <&sata5_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy5: sata_phy@112100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00112100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata5_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata6: ahci@120000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00120000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata6_port0: sata-port@0 { - reg = <0>; - phys = <&sata6_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy6: sata_phy@122100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00122100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata6_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - - sata7: ahci@130000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00130000 0x1000>; - reg-names = "ahci"; - interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata7_port0: sata-port@0 { - reg = <0>; - phys = <&sata7_phy0>; - phy-names = "sata-phy"; - }; - }; - - sata_phy7: sata_phy@132100 { - compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00132100 0x1000>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata7_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - }; - }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index b425b12c3ed2..2ffb2c92182a 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -285,7 +285,6 @@ }; #include "stingray-fs4.dtsi" - #include "stingray-sata.dtsi" #include "stingray-pcie.dtsi" #include "stingray-usb.dtsi" @@ -309,12 +308,6 @@ #size-cells = <0>; }; - mdio@2 { /* SATA */ - reg = <0x2>; - #address-cells = <1>; - #size-cells = <0>; - }; - mdio@3 { /* USB */ reg = <0x3>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 03486a8ffc67..413cac63a1cb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -388,7 +388,7 @@ pmic@66 { compatible = "samsung,s2mps13-pmic"; interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; samsung,s2mps11-wrstbi-ground; @@ -793,7 +793,7 @@ compatible = "samsung,s3fwrn5-i2c"; reg = <0x27>; interrupt-parent = <&gpa1>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 695d4c140646..125c03f351d9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -90,7 +90,7 @@ pmic@66 { compatible = "samsung,s2mps15-pmic"; reg = <0x66>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpa0>; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6f0777ee6cd6..6438db3822f8 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb @@ -33,16 +34,23 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 67702667ed8a..2517528f684f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "fsl-ls1012a.dtsi" / { @@ -57,6 +58,26 @@ }; }; +&dspi { + bus-num = <0>; + status = "okay"; + + serial@0 { + compatible = "nxp,sc16is740"; + reg = <0>; + spi-max-frequency = <4000000>; + clocks = <&sc16is7xx_clk>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + sc16is7xx_clk: clock-sc16is7xx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; +}; + &duart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 449475a97bf1..e22c5e77fecd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -13,6 +13,11 @@ model = "LS1012A QDS Board"; compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + }; + sys_mclk: clock-mclk { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index d45c17620b98..79f155dedb2d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -7,11 +7,17 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "fsl-ls1012a.dtsi" / { model = "LS1012A RDB Board"; compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + }; }; &duart0 { @@ -33,6 +39,50 @@ &i2c0 { status = "okay"; + + accelerometer@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + interrupt-parent = <&gpio26>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + + gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + }; + + gpio@24 { + compatible = "nxp,pcal9555a"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@25 { + compatible = "nxp,pcal9555a"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio26: gpio@26 { + compatible = "nxp,pcal9555a"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <2000>; + }; }; &qspi { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 626b709d1fb9..7de6b376d792 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -7,6 +7,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -34,7 +35,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; #cooling-cells = <2>; cpu-idle-states = <&CPU_PH20>; }; @@ -148,7 +149,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 0>, <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -156,7 +160,8 @@ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <0 62 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -174,7 +179,8 @@ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1580000 0x0 0x10000>; interrupts = <0 65 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -341,7 +347,8 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -351,7 +358,8 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -362,7 +370,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -372,7 +381,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -380,7 +390,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -409,7 +420,7 @@ "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; big-endian; }; @@ -418,8 +429,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>, - <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>, @@ -432,8 +449,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>, - <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>, @@ -453,8 +476,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 3>, - <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; usb0: usb@2f00000 { @@ -473,7 +498,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dma-coherent; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts index d66d8b2c3d1a..6b575efd84a7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -107,3 +107,7 @@ ethernet = <&enetc_port2>; status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts new file mode 100644 index 000000000000..6c309b97587d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * This is for the network variant 1 which has one ethernet port. It is + * different than the base variant, which also has one port, but here the + * port is connected via RGMII. This port is not TSN aware. + * None of the four SerDes lanes are used by the module, instead they are + * all led out to the carrier for customer use. + * + * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" +#include <dt-bindings/net/qca-ar803x.h> + +/ { + model = "Kontron SMARC-sAL28 (4 Lanes)"; + compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc_port0 { + status = "disabled"; + /* + * Delete both the phy-handle to the old phy0 label as well as + * the mdio node with the old phy node with the old phy0 label. + */ + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&enetc_port1 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + vddio-supply = <&vddh>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts index c45d7b40e374..ed4e69e87e30 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -8,6 +8,8 @@ */ /dts-v1/; + +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls1028a-kontron-sl28.dts" / { @@ -120,7 +122,8 @@ mclk: clock-mclk@f130080 { compatible = "fsl,vf610-sai-clock"; reg = <0x0 0xf130080 0x0 0x80>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index c0786b713791..fbcba9cb8503 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -109,6 +109,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &dspi0 { bus-num = <0>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index c1d1ba459307..41ae6e7675ba 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -85,6 +85,22 @@ }; }; +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + &esdhc { sd-uhs-sdr104; sd-uhs-sdr50; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 6c8a61c2cc74..262fbad8f0ec 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -8,6 +8,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -30,7 +31,7 @@ compatible = "arm,cortex-a72"; reg = <0x0>; enable-method = "psci"; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -41,7 +42,7 @@ compatible = "arm,cortex-a72"; reg = <0x1>; enable-method = "psci"; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -205,9 +206,20 @@ }; dcfg: syscon@1e00000 { - compatible = "fsl,ls1028a-dcfg", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd"; reg = <0x0 0x1e00000 0x0 0x10000>; + ranges = <0x0 0x0 0x1e00000 0x10000>; little-endian; + + fspi_clk: clock-controller@900 { + compatible = "fsl,ls1028a-flexspi-clk"; + reg = <0x900 0x4>; + #clock-cells = <0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 0>; + clock-output-names = "fspi_clk"; + }; }; rst: syscon@1e60000 { @@ -235,7 +247,8 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -245,7 +258,8 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -255,7 +269,8 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -265,7 +280,8 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -275,7 +291,8 @@ #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -285,7 +302,8 @@ #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -295,7 +313,8 @@ #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -305,7 +324,8 @@ #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -317,7 +337,7 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 2 0>, <&clockgen 2 0>; + clocks = <&fspi_clk>, <&fspi_clk>; clock-names = "fspi_en", "fspi"; status = "disabled"; }; @@ -329,7 +349,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 0 62>, <&edma0 0 60>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; @@ -344,7 +365,8 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 0 58>, <&edma0 0 56>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; @@ -359,7 +381,8 @@ reg = <0x0 0x2120000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 0 54>, <&edma0 0 2>; dma-names = "tx", "rx"; spi-num-chipselects = <3>; @@ -372,7 +395,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; /* fixed up by bootloader */ - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -385,7 +408,7 @@ reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; /* fixed up by bootloader */ - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; broken-cd; @@ -395,19 +418,25 @@ }; can0: can@2180000 { - compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + compatible = "fsl,lx2160ar1-flexcan"; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg", "per"; status = "disabled"; }; can1: can@2190000 { - compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + compatible = "fsl,lx2160ar1-flexcan"; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -416,7 +445,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -424,7 +454,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -433,7 +464,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2260000 0x0 0x1000>; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 32>, @@ -445,7 +477,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2270000 0x0 0x1000>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 30>, @@ -457,7 +490,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2280000 0x0 0x1000>; interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 28>, @@ -469,7 +503,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2290000 0x0 0x1000>; interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 26>, @@ -481,7 +516,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x22a0000 0x0 0x1000>; interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 24>, @@ -493,7 +529,8 @@ compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x22b0000 0x0 0x1000>; interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; dma-names = "rx","tx"; dmas = <&edma0 1 22>, @@ -512,8 +549,10 @@ interrupt-names = "edma-tx", "edma-err"; dma-channels = <32>; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 1>, - <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; gpio1: gpio@2300000 { @@ -575,7 +614,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -747,14 +787,20 @@ cluster1_core0_watchdog: watchdog@c000000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: watchdog@c010000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; @@ -763,8 +809,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf100000 0x0 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 4>, @@ -778,8 +830,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf110000 0x0 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 6>, @@ -793,8 +851,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf120000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 8>, @@ -808,8 +872,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf130000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 10>, @@ -823,8 +893,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf140000 0x0 0x10000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 12>, @@ -838,8 +914,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0xf150000 0x0 0x10000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>, <&clockgen 4 1>, - <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 14>, @@ -960,7 +1042,7 @@ ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; - clocks = <&clockgen 2 3>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 3>; little-endian; fsl,extts-fifo; }; @@ -1055,8 +1137,10 @@ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; - clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, - <&clockgen 2 2>; + clocks = <&dpclk>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; arm,malidp-arqos-value = <0xd000d000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index bbae4b353d3f..5a8a1dc4262d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -8,6 +8,7 @@ * Mingkai Hu <Mingkai.hu@freescale.com> */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -44,7 +45,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -54,7 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -64,7 +65,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -74,7 +75,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -311,6 +312,31 @@ compatible = "fsl,ls1043a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1043a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; }; crypto: crypto@1700000 { @@ -377,7 +403,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <0 99 0x4>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 0>, <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -476,7 +505,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 64 0x4>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -489,7 +519,8 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <0 65 0x4>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -502,7 +533,8 @@ reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; @@ -516,7 +548,8 @@ reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -527,7 +560,8 @@ reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <0 58 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -538,7 +572,8 @@ reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <0 59 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -546,28 +581,32 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <0 54 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <0 54 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart2: serial@21d0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <0 55 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart3: serial@21d0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <0 55 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; gpio1: gpio@2300000 { @@ -679,7 +718,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; interrupts = <0 48 0x4>; - clocks = <&clockgen 0 0>; + clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg"; status = "disabled"; }; @@ -688,7 +727,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <0 49 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -697,7 +737,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <0 50 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -706,7 +747,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <0 51 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -715,7 +757,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <0 52 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -724,7 +767,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <0 53 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -733,7 +777,8 @@ compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "wdog"; big-endian; }; @@ -750,8 +795,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 0>, - <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; usb0: usb@2f00000 { @@ -793,7 +840,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 69 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dma-coherent; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index d53ccc56bb63..60acdf0b689e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2019-2020 NXP * * Mingkai Hu <mingkai.hu@nxp.com> */ @@ -74,6 +75,8 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; + /* IRQ_RTC_B -> IRQ05, active low */ + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 565934cbfa28..1d6dfd189c7f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -8,6 +8,7 @@ * Mingkai Hu <mingkai.hu@nxp.com> */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -39,7 +40,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -49,7 +50,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -69,7 +70,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; @@ -295,7 +296,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -303,7 +307,7 @@ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -314,6 +318,31 @@ compatible = "fsl,ls1046a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; }; crypto: crypto@1700000 { @@ -454,7 +483,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; spi-num-chipselects = <5>; big-endian; status = "disabled"; @@ -466,7 +496,8 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; @@ -479,7 +510,8 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -489,7 +521,8 @@ #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -499,7 +532,8 @@ #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -507,7 +541,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -515,7 +550,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -523,7 +559,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -531,7 +568,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -579,7 +617,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; }; @@ -588,7 +627,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -597,7 +637,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -606,7 +647,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -615,7 +657,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -624,7 +667,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; }; @@ -633,7 +677,8 @@ compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; big-endian; }; @@ -649,8 +694,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 1>, - <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; usb0: usb@2f00000 { @@ -689,7 +736,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; msi1: msi-controller@1580000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 528ec72d0b83..bf7b43ab1293 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -2,7 +2,7 @@ /* * Device Tree file for NXP LS1088A RDB Board. * - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Harninder Rai <harninder.rai@nxp.com> * @@ -158,8 +158,8 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - /* IRQ10_B */ - interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */ + interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 6403455ed039..8ffbc9fde041 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -7,6 +7,7 @@ * Harninder Rai <harninder.rai@nxp.com> * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -30,7 +31,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -39,7 +40,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -48,7 +49,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -57,7 +58,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -75,7 +76,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -84,7 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x102>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -93,7 +94,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x103>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; }; @@ -220,6 +221,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,ls1088a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -279,7 +311,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; spi-num-chipselects = <6>; status = "disabled"; }; @@ -287,7 +320,8 @@ duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -295,7 +329,8 @@ duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -360,7 +395,8 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -370,7 +406,8 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -380,7 +417,8 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -390,7 +428,8 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; }; @@ -403,7 +442,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -412,7 +454,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clock-frequency = <0>; - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -447,7 +489,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -698,7 +741,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; little-endian; fsl,extts-fifo; }; @@ -787,56 +831,80 @@ cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core2_watchdog: wdt@c020000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core3_watchdog: wdt@c030000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core2_watchdog: wdt@c120000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core3_watchdog: wdt@c130000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index f9c1d30cf4a7..76ab68d2de0b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -9,6 +9,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls208xa.dtsi" &cpu { @@ -16,7 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -26,7 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -36,7 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -46,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -56,7 +57,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; @@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; @@ -76,7 +77,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -86,7 +87,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index a5f668d786b8..da24dc127698 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -9,6 +9,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls208xa.dtsi" &cpu { @@ -16,7 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -26,7 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>; @@ -36,7 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -46,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>; @@ -56,7 +57,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>; @@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>; @@ -76,7 +77,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; @@ -86,7 +87,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index d0d670227ae2..4b71c4fcb35f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -3,7 +3,7 @@ * Device Tree file for Freescale LS2080A RDB Board. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * @@ -56,6 +56,8 @@ rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; + /* IRQ_RTC_B -> IRQ06, active low */ + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index c68901f8c6f0..135ac8210871 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -3,12 +3,13 @@ * Device Tree Include file for Freescale Layerscape-2080A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. - * Copyright 2017 NXP + * Copyright 2017-2020 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -277,6 +278,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,ls2080a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -325,84 +357,112 @@ serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 0x4>; /* Level high type */ }; serial1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 0x4>; /* Level high type */ }; serial2: serial@21d0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 33 0x4>; /* Level high type */ }; serial3: serial@21d0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 33 0x4>; /* Level high type */ }; cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster3_core0_watchdog: wdt@c200000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc200000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster3_core1_watchdog: wdt@c210000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc210000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster4_core0_watchdog: wdt@c300000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc300000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster4_core1_watchdog: wdt@c310000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc310000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "wdog_clk", "apb_pclk"; }; @@ -453,7 +513,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; little-endian; fsl,extts-fifo; }; @@ -864,7 +925,8 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 26 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <0>; @@ -875,7 +937,8 @@ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -934,7 +997,8 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; i2c1: i2c@2010000 { @@ -945,7 +1009,8 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; i2c2: i2c@2020000 { @@ -956,7 +1021,8 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; i2c3: i2c@2030000 { @@ -967,7 +1033,8 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; ifc: ifc@2240000 { @@ -991,7 +1058,10 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "qspi_en", "qspi"; status = "disabled"; }; @@ -1089,7 +1159,8 @@ compatible = "fsl,ls2080a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>; interrupts = <0 133 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; }; @@ -1098,7 +1169,8 @@ compatible = "fsl,ls2080a-ahci"; reg = <0x0 0x3210000 0x0 0x10000>; interrupts = <0 136 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi index d87d16460875..459dccad8326 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -40,6 +40,7 @@ rgmii_phy1: ethernet-phy@1 { reg = <1>; + qca,smarteee-tw-us-1g = <24>; }; }; @@ -134,8 +135,6 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - // IRQ10_B - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi index f3741a32e868..2b63235ca627 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-lx2160a-cex7.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { aliases { @@ -18,6 +19,17 @@ chosen { stdout-path = "serial0:115200n8"; }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "power"; + linux,can-disable; + linux,code = <KEY_POWER>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; }; &emdio2 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 2d1fe6c3797f..d858d9c8b583 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -14,6 +14,8 @@ aliases { crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; serial0 = &uart0; }; @@ -31,6 +33,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &crypto { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 7723ad5efd37..5dbf27493e8b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -2,7 +2,7 @@ // // Device Tree file for LX2160ARDB // -// Copyright 2018 NXP +// Copyright 2018-2020 NXP /dts-v1/; @@ -14,6 +14,8 @@ aliases { crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; serial0 = &uart0; }; @@ -87,6 +89,22 @@ }; }; +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + &esdhc0 { sd-uhs-sdr104; sd-uhs-sdr50; @@ -175,8 +193,8 @@ rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; - // IRQ10_B - interrupts = <0 150 0x4>; + /* IRQ_RTC_B -> IRQ08, active low */ + interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 197397777c83..0551f6f4c313 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -4,6 +4,7 @@ // // Copyright 2018-2020 NXP +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -30,7 +31,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -47,7 +48,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -64,7 +65,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -81,7 +82,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -98,7 +99,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -115,7 +116,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -132,7 +133,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -149,7 +150,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -166,7 +167,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x400>; - clocks = <&clockgen 1 4>; + clocks = <&clockgen QORIQ_CLK_CMUX 4>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -183,7 +184,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x401>; - clocks = <&clockgen 1 4>; + clocks = <&clockgen QORIQ_CLK_CMUX 4>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -200,7 +201,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x500>; - clocks = <&clockgen 1 5>; + clocks = <&clockgen QORIQ_CLK_CMUX 5>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -217,7 +218,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x501>; - clocks = <&clockgen 1 5>; + clocks = <&clockgen QORIQ_CLK_CMUX 5>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -234,7 +235,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x600>; - clocks = <&clockgen 1 6>; + clocks = <&clockgen QORIQ_CLK_CMUX 6>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -251,7 +252,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x601>; - clocks = <&clockgen 1 6>; + clocks = <&clockgen QORIQ_CLK_CMUX 6>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -268,7 +269,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x700>; - clocks = <&clockgen 1 7>; + clocks = <&clockgen QORIQ_CLK_CMUX 7>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -285,7 +286,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x701>; - clocks = <&clockgen 1 7>; + clocks = <&clockgen QORIQ_CLK_CMUX 7>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; @@ -664,6 +665,37 @@ little-endian; }; + isc: syscon@1f70000 { + compatible = "fsl,lx2160a-isc", "syscon"; + reg = <0x0 0x1f70000 0x0 0x10000>; + little-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1f70000 0x10000>; + + extirq: interrupt-controller@14 { + compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x14 4>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -685,7 +717,8 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -697,7 +730,8 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -708,7 +742,8 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -719,7 +754,8 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -730,7 +766,8 @@ reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -742,7 +779,8 @@ reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -753,7 +791,8 @@ reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -764,7 +803,8 @@ reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; }; @@ -776,7 +816,10 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "fspi_en", "fspi"; status = "disabled"; }; @@ -787,7 +830,8 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <0>; @@ -800,7 +844,8 @@ #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <1>; @@ -813,7 +858,8 @@ #size-cells = <0>; reg = <0x0 0x2120000 0x0 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <2>; @@ -824,7 +870,8 @@ compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; @@ -837,7 +884,8 @@ compatible = "fsl,esdhc"; reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; @@ -847,6 +895,30 @@ status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_SYSCLK 0>; + clock-names = "ipg", "per"; + fsl,clk-source = <0>; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>, + <&clockgen QORIQ_CLK_SYSCLK 0>; + clock-names = "ipg", "per"; + fsl,clk-source = <0>; + status = "disabled"; + }; + uart0: serial@21c0000 { compatible = "arm,sbsa-uart","arm,pl011"; reg = <0x0 0x21c0000 0x0 0x1000>; @@ -973,7 +1045,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -984,7 +1057,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -995,7 +1069,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -1006,7 +1081,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; }; @@ -1279,7 +1355,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; little-endian; fsl,extts-fifo; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts index 91786848bd30..e1defee1ad27 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -14,6 +14,8 @@ aliases { crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; serial0 = &uart0; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index d6b9dedd168f..6f5e63696ec0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -102,7 +102,6 @@ compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; - clock-names = "xclk"; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index d897913537ca..988f8ab679ad 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -256,8 +256,10 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <4>; non-removable; cap-power-off-card; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts new file mode 100644 index 000000000000..c0c384d76147 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board. + * Adrien Grassein <adrien.grassein@gmail.com.com> + */ +/dts-v1/; +#include "imx8mm.dtsi" + +/ { + model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2"; + compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm"; +}; + +&A53_0 { + cpu-supply = <®_buck3>; +}; + +&A53_1 { + cpu-supply = <®_buck3>; +}; + +&A53_2 { + cpu-supply = <®_buck3>; +}; + +&A53_3 { + cpu-supply = <®_buck3>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x8>; + + regulators { + reg_ldo1: ldo1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo2: ldo2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo3: ldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_ldo4: ldo4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck1: buck1 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck2: buck2 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck3: buck3 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck4: buck4 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck5: buck5 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck6: buck6 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_buck7: buck7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9540"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c3 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3a_rv4162>; + interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; + }; + }; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + bus-width = <8>; + sdhci-caps-mask = <0x80000000 0x0>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* sdcard */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vqmmc-supply = <®_ldo2>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x159 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3a_rv4162: i2c3a-rv4162grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x141 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x03 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi new file mode 100644 index 000000000000..c769fadbd008 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck3_reg>; +}; + +&A53_1 { + cpu-supply = <&buck3_reg>; +}; + +&A53_2 { + cpu-supply = <&buck3_reg>; +}; + +&A53_3 { + cpu-supply = <&buck3_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@16 { + gw,mode = <4>; + reg = <0x16>; + label = "fan_tach"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_adc1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_adc2"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_dram"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_1p2"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_1p0"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_0p95"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p8"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + + fan-controller@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gw,gsc-fan"; + reg = <0x0a>; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + + pmic@69 { + compatible = "mps,mp5416"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x69>; + + regulators { + buck1 { + regulator-name = "vdd_0p95"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <1000000>; + regulator-max-microamp = <2500000>; + regulator-boot-on; + }; + + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <900000>; + regulator-max-microamp = <1000000>; + regulator-boot-on; + }; + + buck3_reg: buck3 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <1000000>; + regulator-max-microamp = <2200000>; + regulator-boot-on; + }; + + buck4 { + regulator-name = "vdd_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-max-microamp = <500000>; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "nvcc_snvs_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-max-microamp = <300000>; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd_snvs_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vdd_0p95"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vdd_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts new file mode 100644 index 000000000000..3f88c4ad5716 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw71xx.dtsi" + +/ { + model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi new file mode 100644 index 000000000000..905b68a3daa5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* off-board header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000041 /* DIO2 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIO2 */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_reg_usb1_en: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts new file mode 100644 index 000000000000..b1e7540f0281 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw72xx.dtsi" + +/ { + model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi new file mode 100644 index 000000000000..b7c91bdc21dd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* off-board header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* RS232 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_reg_usb1_en: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; + + pinctrl_reg_usb2_en: regusb2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts new file mode 100644 index 000000000000..6905437ff281 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw73xx.dtsi" + +/ { + model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit"; + compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi new file mode 100644 index 000000000000..d2ffd62a3bd4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2_en>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi_en: regulator-wifi-en { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + compatible = "regulator-fixed"; + regulator-name = "wl"; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; + cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +/* RS232 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 + >; + }; + + pinctrl_bten: btengrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 + >; + }; + + pinctrl_reg_usb1_en: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; + + pinctrl_reg_usb2_en: regusb2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c824f2615fe8..6bf1d15ba16a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -257,10 +257,12 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mm-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mm_uid>; + nvmem-cell-names = "soc_unique_id"; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -518,9 +520,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mm_uid: unique-id@410 { + reg = <0x4 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec_mac_address: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: anatop@30360000 { @@ -909,13 +919,18 @@ assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, <&clk IMX8MM_CLK_ENET_TIMER>, <&clk IMX8MM_CLK_ENET_REF>, - <&clk IMX8MM_CLK_ENET_TIMER>; + <&clk IMX8MM_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, <&clk IMX8MM_SYS_PLL2_100M>, - <&clk IMX8MM_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + <&clk IMX8MM_SYS_PLL2_125M>, + <&clk IMX8MM_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <&fec_mac_address>; + nvmem-cell-names = "mac-address"; + nvmem_macaddr_swap; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi new file mode 100644 index 000000000000..376ca8ff7213 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Compass Electronics Group, LLC + */ + +/ { + leds { + compatible = "gpio-leds"; + + led-0 { + label = "gen_led0"; + gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + label = "gen_led1"; + gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "gen_led2"; + gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led3>; + label = "heartbeat"; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + regulator-name = "vsd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_espi2>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + eeprom@0 { + compatible = "microchip,at25160bn", "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + pagesize = <32>; + size = <2048>; + address-width = <16>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pca6416_0: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6414>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; + + pca6416_1: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + clock-names = "xclk"; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&easrc { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MN_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; + dr_mode="otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_espi2: espi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_led3: led3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41 + >; + }; + + pinctrl_pcal6414: pcal6414-gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 + >; + }; + + pinctrl_reg_usb_otg: reg-otggrp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 + MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41 + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts new file mode 100644 index 000000000000..1392ce02587b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-beacon-som.dtsi" +#include "imx8mn-beacon-baseboard.dtsi" + +/ { + model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit"; + compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn"; + + chosen { + stdout-path = &uart2; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi new file mode 100644 index 000000000000..de2cd0e3201c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -0,0 +1,466 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Compass Electronics Group, LLC + */ + +/ { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + }; + + usdhc1_pwrseq: usdhc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_gpio>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + clocks = <&osc_32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +/* DDR controller is running LPDDR at 800MHz which requires 0.95V */ +&a53_opp_table { + opp-1200000000 { + opp-microvolt = <950000>; + }; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + phy-supply = <&buck6_reg>; + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + eeprom@50 { + compatible = "microchip,24c64", "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x50>; + }; + + rtc: rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MN_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + clocks = <&osc_32k>; + max-speed = <4000000>; + clock-names = "extclk"; + }; +}; + +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + cap-power-off-card; + pm-ignore-notify; + keep-power-in-suspend; + mmc-pwrseq = <&usdhc1_pwrseq>; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 + MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 + MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 + MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 + >; + }; + + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 76d042a4cf09..a0dddba2e561 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -46,6 +46,40 @@ pinctrl-0 = <&pinctrl_ir>; linux,autosuspend-period = <125>; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + clock-names = "mclk"; + }; + + sound-wm8524 { + compatible = "fsl,imx-audio-wm8524"; + model = "wm8524-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8524>; + audio-asrc = <&easrc>; + audio-routing = + "Line Out Jack", "LINEVOUTL", + "Line Out Jack", "LINEVOUTR"; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif1>; + spdif-out; + spdif-in; + }; +}; + +&easrc { + fsl,asrc-rate = <48000>; + status = "okay"; }; &fec1 { @@ -124,10 +158,29 @@ }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -210,6 +263,12 @@ >; }; + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + pinctrl_ir: irgrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f @@ -249,6 +308,22 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_spdif1: spdif1grp { + fsl,pins = < + MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + pinctrl_typec1: typec1grp { fsl,pins = < MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 2a79e89f821e..16ea50089567 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -241,10 +241,12 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mn-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mn_uid>; + nvmem-cell-names = "soc_unique_id"; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -531,9 +533,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mn_uid: unique-id@410 { + reg = <0x4 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec_mac_address: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: anatop@30360000 { @@ -581,7 +591,9 @@ <&clk IMX8MN_CLK_NOC>, <&clk IMX8MN_CLK_AUDIO_AHB>, <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, - <&clk IMX8MN_SYS_PLL3>; + <&clk IMX8MN_SYS_PLL3>, + <&clk IMX8MN_AUDIO_PLL1>, + <&clk IMX8MN_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>, <&clk IMX8MN_ARM_PLL_OUT>, <&clk IMX8MN_SYS_PLL3_OUT>, @@ -589,7 +601,9 @@ assigned-clock-rates = <0>, <0>, <0>, <400000000>, <400000000>, - <600000000>; + <600000000>, + <393216000>, + <361267200>; }; src: reset-controller@30390000 { @@ -875,6 +889,19 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_QSPI_ROOT>, + <&clk IMX8MN_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; @@ -903,13 +930,18 @@ assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, <&clk IMX8MN_CLK_ENET_TIMER>, <&clk IMX8MN_CLK_ENET_REF>, - <&clk IMX8MN_CLK_ENET_TIMER>; + <&clk IMX8MN_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, <&clk IMX8MN_SYS_PLL2_100M>, - <&clk IMX8MN_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + <&clk IMX8MN_SYS_PLL2_125M>, + <&clk IMX8MN_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <&fec_mac_address>; + nvmem-cell-names = "mac-address"; + nvmem_macaddr_swap; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts new file mode 100644 index 000000000000..0e1a6d953389 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx8mp-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Pollux i.MX8MP"; + compatible = "phytec,imx8mp-phyboard-pollux-rdk", + "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led1 { + type = <PCA9532_TYPE_LED>; + }; + + led2 { + type = <PCA9532_TYPE_LED>; + }; + + led3 { + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* debug console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2_pins: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi new file mode 100644 index 000000000000..44a8c2337cee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +#include <dt-bindings/net/ti-dp83867.h> +#include "imx8mp.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX8MP"; + compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp"; + + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +/* ethernet 1 */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + enet-phy-lane-no-swap; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-compatible = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-compatible = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-compatible = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-compatible = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-compatible = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-compatible = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-compatible = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-compatible = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-compatible = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-compatible = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + trickle-resistor-ohms = <3000>; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 23f5a5e37167..f55e3f749d38 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -218,10 +218,12 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mp-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mp_uid>; + nvmem-cell-names = "soc_unique_id"; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; @@ -328,9 +330,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mp_uid: unique-id@420 { + reg = <0x8 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + eth_mac1: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: anatop@30360000 { @@ -762,13 +772,18 @@ assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, <&clk IMX8MP_CLK_ENET_TIMER>, <&clk IMX8MP_CLK_ENET_REF>, - <&clk IMX8MP_CLK_ENET_TIMER>; + <&clk IMX8MP_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, <&clk IMX8MP_SYS_PLL2_100M>, - <&clk IMX8MP_SYS_PLL2_125M>; - assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + <&clk IMX8MP_SYS_PLL2_125M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <ð_mac1>; + nvmem-cell-names = "mac-address"; + fsl,stop-mode = <&gpr 0x10 3>; + nvmem_macaddr_swap; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index af139b283daf..dd217a0760e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -244,11 +244,6 @@ cpu-supply = <&buck2_reg>; }; -&clk { - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; - assigned-clock-rates = <786432000>, <722534400>; -}; - &dphy { status = "okay"; }; @@ -298,6 +293,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <900000>; rohm,dvs-idle-voltage = <850000>; @@ -319,6 +315,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-enable-ramp-delay = <200>; rohm,dvs-run-voltage = <900000>; }; @@ -334,6 +331,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; regulator-boot-on; + regulator-always-on; }; buck6_reg: BUCK6 { @@ -341,6 +339,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; buck7_reg: BUCK7 { @@ -348,6 +347,7 @@ regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; + regulator-always-on; }; buck8_reg: BUCK8 { @@ -355,6 +355,7 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; + regulator-always-on; }; ldo1_reg: LDO1 { @@ -380,6 +381,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo4_reg: LDO4 { @@ -387,12 +389,14 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; ldo5_reg: LDO5 { regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; ldo6_reg: LDO6 { @@ -400,6 +404,7 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; ldo7_reg: LDO7 { @@ -407,6 +412,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; }; }; @@ -886,6 +892,10 @@ status = "okay"; }; +&snvs_rtc { + status = "disabled"; +}; + &sai2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts index 6704ea2c72a3..0d38327043f8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -10,6 +10,12 @@ compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq"; }; +&a53_opp_table { + opp-1000000000 { + opp-microvolt = <1000000>; + }; +}; + &accel_gyro { mount-matrix = "1", "0", "0", "0", "1", "0", diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts new file mode 100644 index 000000000000..cbfb49aa2563 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Purism SPC <kernel@puri.sm> + +/dts-v1/; + +#include "imx8mq-librem5.dtsi" + +/ { + model = "Purism Librem 5r4"; + compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq"; +}; + +&accel_gyro { + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; +}; + +&bat { + maxim,rsns-microohm = <1667>; +}; + +&bq25895 { + ti,battery-regulation-voltage = <4200000>; /* uV */ + ti,charge-current = <1500000>; /* uA */ + ti,termination-current = <144000>; /* uA */ +}; + +&led_backlight { + led-max-microamp = <25000>; +}; + +&proximity { + proximity-near-level = <10>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 64fc546b110f..06a4799b6aeb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -82,6 +82,20 @@ enable-active-high; }; + reg_lcd_1v8: regulator-lcd-1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsien>; + regulator-name = "LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_vdd_1v8>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* Otherwise i2c3 is not functional */ + regulator-always-on; + }; + reg_lcd_3v4: regulator-lcd-3v4 { compatible = "regulator-fixed"; regulator-name = "LCD_3V4"; @@ -99,6 +113,14 @@ regulator-max-microvolt = <3300000>; }; + reg_vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&buck7_reg>; + }; + reg_vdd_3v3: regulator-vdd-3v3 { compatible = "regulator-fixed"; regulator-name = "VDD_3V3"; @@ -106,13 +128,6 @@ regulator-max-microvolt = <3300000>; }; - reg_vdd_1v8: regulator-vdd-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - reg_vsys_3v4: regulator-vsys-3v4 { compatible = "regulator-fixed"; regulator-name = "VSYS_3V4"; @@ -275,7 +290,7 @@ pinctrl_charger_in: chargeringrp { fsl,pins = < /* CHRG_INT */ - MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x00 + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 /* CHG_STATUS_B */ MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 >; @@ -295,6 +310,17 @@ >; }; + pinctrl_dsirst: dsirstgrp { + fsl,pins = < + /* DSI_RST */ + MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x83 + /* DSI_TE */ + MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x83 + /* TP_RST */ + MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x83 + >; + }; + pinctrl_ecspi1: ecspigrp { fsl,pins = < MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x83 @@ -458,6 +484,13 @@ >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* TP_INT */ + MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80 + >; + }; + pinctrl_typec: typecgrp { fsl,pins = < /* TYPEC_MUX_EN */ @@ -649,6 +682,7 @@ regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; + regulator-boot-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <900000>; rohm,dvs-idle-voltage = <850000>; @@ -660,6 +694,7 @@ regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; + regulator-boot-on; regulator-ramp-delay = <1250>; rohm,dvs-run-voltage = <1000000>; rohm,dvs-idle-voltage = <900000>; @@ -670,8 +705,8 @@ regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; + regulator-boot-on; rohm,dvs-run-voltage = <900000>; - regulator-always-on; }; buck4_reg: BUCK4 { @@ -685,6 +720,7 @@ regulator-name = "buck5"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; + regulator-boot-on; regulator-always-on; }; @@ -692,6 +728,7 @@ regulator-name = "buck6"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; regulator-always-on; }; @@ -699,6 +736,7 @@ regulator-name = "buck7"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; + regulator-boot-on; regulator-always-on; }; @@ -706,6 +744,7 @@ regulator-name = "buck8"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + regulator-boot-on; regulator-always-on; }; @@ -713,6 +752,7 @@ regulator-name = "ldo1"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; /* leave on for snvs power button */ regulator-always-on; }; @@ -721,6 +761,7 @@ regulator-name = "ldo2"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; + regulator-boot-on; /* leave on for snvs power button */ regulator-always-on; }; @@ -729,6 +770,7 @@ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; regulator-always-on; }; @@ -736,6 +778,7 @@ regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; regulator-always-on; }; @@ -752,6 +795,7 @@ regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; regulator-always-on; }; @@ -760,6 +804,7 @@ regulator-name = "ldo7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; regulator-always-on; }; }; @@ -796,12 +841,12 @@ compatible = "tps65132"; reg = <0x3e>; - outp { + reg_lcd_avdd: outp { regulator-name = "LCD_AVDD"; vin-supply = <®_lcd_3v4>; }; - outn { + reg_lcd_avee: outn { regulator-name = "LCD_AVEE"; vin-supply = <®_lcd_3v4>; }; @@ -879,10 +924,13 @@ touchscreen@38 { compatible = "edt,edt-ft5506"; reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; interrupt-parent = <&gpio1>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; touchscreen-size-x = <720>; touchscreen-size-y = <1440>; + vcc-supply = <®_lcd_1v8>; }; }; @@ -919,6 +967,45 @@ ti,use-vinmin-threshold = <1>; /* enable VINDPM */ ti,vinmin-threshold = <3900000>; /* uV */ monitored-battery = <&bat>; + power-supplies = <&typec_pd>; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + lcd_panel: panel@0 { + compatible = "mantix,mlaf057we51-x"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dsirst>; + avdd-supply = <®_lcd_avdd>; + avee-supply = <®_lcd_avee>; + vddi-supply = <®_lcd_1v8>; + backlight = <&backlight_dsi>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; }; @@ -1072,6 +1159,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -1084,6 +1173,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index bfad4b885905..631e01c1b9fd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -10,6 +10,56 @@ / { model = "ZII Ultra RMB3 Board"; compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; + + sound1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "front"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound1_codec>; + simple-audio-card,frame-master = <&sound1_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack Front"; + simple-audio-card,routing = + "Headphone Jack Front", "HPA1 HPLEFT", + "Headphone Jack Front", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>; + + sound1_cpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + sound1_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; + + sound2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "periph"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound2_codec>; + simple-audio-card,frame-master = <&sound2_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack Back"; + simple-audio-card,routing = + "Headphone Jack Back", "HPA1 HPLEFT", + "Headphone Jack Back", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa2>; + + sound2_cpu: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + sound2_codec: simple-audio-card,codec { + sound-dai = <&codec2>; + clocks = <&cs2000>; + }; + }; }; &ecspi1 { @@ -27,6 +77,27 @@ }; }; +&hpa2 { + sound-name-prefix = "HPA1"; +}; + +&i2c1 { + codec2: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec2>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + }; +}; + &i2c2 { temp-sense@48 { compatible = "national,lm75"; @@ -56,6 +127,8 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; + syna,delta-x-threshold = <5>; + syna,delta-y-threshold = <10>; }; rmi4-f12@12 { @@ -79,11 +152,23 @@ }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + status = "okay"; +}; + &usbhub { swap-dx-lanes = <0>; }; &iomuxc { + pinctrl_codec2: dac2grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x41 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 @@ -92,4 +177,12 @@ MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 >; }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts index 173b9e9b2bbd..f6130167a1c7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts @@ -10,6 +10,36 @@ / { model = "ZII Ultra Zest Board"; compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "front"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack Front", + "Headphone", "Headphone Jack Back"; + simple-audio-card,routing = + "Headphone Jack Front", "HPA1 HPLEFT", + "Headphone Jack Front", "HPA1 HPRIGHT", + "Headphone Jack Back", "HPA2 HPLEFT", + "Headphone Jack Back", "HPA2 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR", + "HPA2 LEFTIN", "HPL", + "HPA2 RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>, <&hpa2>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; }; &i2c4 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index fa7a041ffcfd..4dc8383478ee 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -77,6 +77,15 @@ regulator-always-on; }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "GEN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -102,6 +111,18 @@ 900000 0x0>; regulator-always-on; }; + + cs2000_ref: cs2000-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + cs2000_in_dummy: cs2000-in-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; &A53_0 { @@ -283,9 +304,19 @@ reg = <0x32>; interrupt-parent = <&gpio3>; interrupts = <17 IRQ_TYPE_EDGE_BOTH>, - <18 IRQ_TYPE_EDGE_BOTH>; + <18 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "a_det", "alert"; }; + + hpa2: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa2>; + reg = <0x60>; + power-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0_main>; + sound-name-prefix = "HPA2"; + }; }; &i2c2 { @@ -378,11 +409,36 @@ }; }; + codec1: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec1>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + }; + eeprom@54 { compatible = "atmel,24c128"; reg = <0x54>; }; + hpa1: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa1>; + reg = <0x60>; + power-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0_main>; + sound-name-prefix = "HPA1"; + }; + ds1341: rtc@68 { compatible = "dallas,ds1341"; reg = <0x68>; @@ -407,6 +463,16 @@ compatible = "zii,rave-wdt"; reg = <0x38>; }; + + cs2000: clkgen@4e { + compatible = "cirrus,cs2000-cp"; + reg = <0x4e>; + #clock-cells = <0>; + clock-names = "clk_in", "ref_clk"; + clocks = <&cs2000_in_dummy>, <&cs2000_ref>; + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24000000>; + }; }; &i2c4 { @@ -416,6 +482,12 @@ status = "okay"; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -468,6 +540,7 @@ &usb_dwc3_0 { dr_mode = "host"; + maximum-speed = "high-speed"; status = "okay"; }; @@ -478,6 +551,7 @@ &usb_dwc3_1 { dr_mode = "host"; + maximum-speed = "high-speed"; status = "okay"; }; @@ -551,6 +625,12 @@ >; }; + pinctrl_codec1: dac1grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x41 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -583,29 +663,29 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f - MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000022 + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000a2 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < - MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f - MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000022 + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000a2 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < - MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f - MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022 + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000a2 >; }; pinctrl_i2c4: i2c4grp { fsl,pins = < - MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f - MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000022 + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000a2 >; }; @@ -642,12 +722,32 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + >; + }; + pinctrl_switch_irq: switchgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 >; }; + pinctrl_tpa1: tpa6130-1grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x41 + >; + }; + + pinctrl_tpa2: tpa6130-2grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 + >; + }; + pinctrl_ts: tsgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index a841a023e8e0..17c449e12c2e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -11,6 +11,7 @@ #include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interconnect/imx8mq.h> #include "imx8mq-pinfunc.h" / { @@ -286,11 +287,13 @@ }; soc@0 { - compatible = "simple-bus"; + compatible = "fsl,imx8mq-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; + nvmem-cells = <&imx8mq_uid>; + nvmem-cell-names = "soc_unique_id"; bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; @@ -522,6 +525,8 @@ <&clk IMX8MQ_VIDEO_PLL1>, <&clk IMX8MQ_VIDEO_PLL1_OUT>; assigned-clock-rates = <0>, <0>, <0>, <594000000>; + interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; status = "disabled"; port@0 { @@ -555,9 +560,17 @@ #address-cells = <1>; #size-cells = <1>; + imx8mq_uid: soc-uid@410 { + reg = <0x4 0x8>; + }; + cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + fec_mac_address: mac-address@90 { + reg = <0x90 6>; + }; }; anatop: syscon@30360000 { @@ -826,6 +839,8 @@ clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, <&clk IMX8MQ_CLK_ECSPI1_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -838,6 +853,8 @@ clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, <&clk IMX8MQ_CLK_ECSPI2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -850,6 +867,8 @@ clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, <&clk IMX8MQ_CLK_ECSPI3_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1016,9 +1035,14 @@ reg = <0x30a00300 0x100>; clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; clock-names = "phy_ref"; - assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; - assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; - assigned-clock-rates = <24000000>; + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, + <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>, + <&clk IMX8MQ_VIDEO_PLL1>, + <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <0>, <0>, <24000000>, <594000000>; #phy-cells = <0>; power-domains = <&pgc_mipi>; status = "disabled"; @@ -1152,12 +1176,50 @@ <&clk IMX8MQ_CLK_ENET_PHY_REF>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>, + <&clk IMX8MQ_CLK_ENET_TIMER>, + <&clk IMX8MQ_CLK_ENET_REF>, + <&clk IMX8MQ_CLK_ENET_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS2_PLL_125M>, + <&clk IMX8MQ_SYS2_PLL_50M>; + assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; + nvmem-cells = <&fec_mac_address>; + nvmem-cell-names = "mac-address"; + nvmem_macaddr_swap; + fsl,stop-mode = <&iomuxc_gpr 0x10 3>; status = "disabled"; }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MQ_CLK_NOC>; + fsl,ddrc = <&ddrc>; + #interconnect-cells = <1>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133M { + opp-hz = /bits/ 64 <133333333>; + }; + + opp-400M { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; @@ -1315,6 +1377,7 @@ <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; + linux,pci-domain = <0>; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, @@ -1344,6 +1407,7 @@ <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; + linux,pci-domain = <1>; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY2>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi index 4338db14c5da..ae1c2abaaf36 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -6,6 +6,8 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> + fman0: fman@1a00000 { #address-cells = <1>; #size-cells = <1>; @@ -15,7 +17,7 @@ fman0: fman@1a00000 { reg = <0x0 0x1a00000 0x0 0xfe000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 3 0>; + clocks = <&clockgen QORIQ_CLK_FMAN 0>; clock-names = "fmanclk"; fsl,qman-channel-range = <0x800 0x10>; ptimer-handle = <&ptp_timer0>; @@ -81,6 +83,6 @@ ptp_timer0: ptp-timer@1afe000 { compatible = "fsl,fman-ptp-timer"; reg = <0x0 0x1afe000 0x0 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 3 0>; + clocks = <&clockgen QORIQ_CLK_FMAN 0>; fsl,extts-fifo; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 49c19c6879f9..cab89dc6f596 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1113,7 +1113,7 @@ thermal-zones { - cls0: cls0 { + cls0: cls0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; sustainable-power = <4500>; @@ -1122,13 +1122,13 @@ thermal-sensors = <&tsensor 1>; trips { - threshold: trip-point@0 { + threshold: trip-point0 { temperature = <65000>; hysteresis = <1000>; type = "passive"; }; - target: trip-point@1 { + target: trip-point1 { temperature = <75000>; hysteresis = <1000>; type = "passive"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 85b0dfb35d6d..8830795c8efc 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -194,6 +194,12 @@ #clock-cells = <1>; }; + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + uart0: serial@fdf02000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf02000 0x0 0x1000>; @@ -708,5 +714,76 @@ card-detect-delay = <200>; status = "disabled"; }; + + /* I2C */ + i2c0: i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&iomcu HI3670_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&iomcu HI3670_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c2: i2c@ffd73000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd73000 0x0 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&iomcu HI3670_CLK_GATE_I2C2>; + resets = <&iomcu_rst 0x20 5>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c@fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c4: i2c@fdf0d000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0d000 0x0 0x1000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>; + resets = <&crg_rst 0x78 27>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 81d09434c5c6..a83b9d4f172e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -113,7 +113,7 @@ #size-cells = <1>; ranges = <0x0 0x8a20000 0x1000>; - usb2_phy1: usb2-phy@120 { + usb2_phy1: usb2_phy@120 { compatible = "hisilicon,hi3798cv200-usb2-phy"; reg = <0x120 0x4>; clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; @@ -134,7 +134,7 @@ }; }; - usb2_phy2: usb2-phy@124 { + usb2_phy2: usb2_phy@124 { compatible = "hisilicon,hi3798cv200-usb2-phy"; reg = <0x124 0x4>; clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; @@ -565,8 +565,8 @@ device_type = "pci"; bus-range = <0x00 0xff>; num-lanes = <1>; - ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 - 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; + ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>, + <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index c6580c9f068e..d426c6c8722b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -872,7 +872,7 @@ thermal-zones { - cls0: cls0 { + cls0: cls0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; sustainable-power = <3326>; @@ -881,13 +881,13 @@ thermal-sensors = <&tsensor 2>; trips { - threshold: trip-point@0 { + threshold: trip-point0 { temperature = <65000>; hysteresis = <0>; type = "passive"; }; - target: trip-point@1 { + target: trip-point1 { temperature = <75000>; hysteresis = <0>; type = "passive"; @@ -1053,7 +1053,7 @@ "ppmmu3"; clocks = <&media_ctrl HI6220_G3D_CLK>, <&media_ctrl HI6220_G3D_PCLK>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; assigned-clocks = <&media_ctrl HI6220_G3D_CLK>, <&media_ctrl HI6220_G3D_PCLK>; assigned-clock-rates = <500000000>, <144000000>; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index d456b0aa6f58..77bd8c3a8314 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -61,6 +61,153 @@ 0x060 MUX_M1 /* UART6_TXD */ >; }; + + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x010 MUX_M1 /* I2C3_SCL */ + 0x014 MUX_M1 /* I2C3_SDA */ + >; + }; + + i2c4_pmx_func: i2c4_pmx_func { + pinctrl-single,pins = < + 0x03c MUX_M1 /* I2C4_SCL */ + 0x040 MUX_M1 /* I2C4_SDA */ + >; + }; + + cam0_rst_pmx_func: cam0_rst_pmx_func { + pinctrl-single,pins = < + 0x714 MUX_M0 /* CAM0_RST */ + >; + }; + + cam1_rst_pmx_func: cam1_rst_pmx_func { + pinctrl-single,pins = < + 0x048 MUX_M0 /* CAM1_RST */ + >; + }; + + cam0_pwd_n_pmx_func: cam0_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x098 MUX_M0 /* CAM0_PWD_N */ + >; + }; + + cam1_pwd_n_pmx_func: cam1_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M0 /* CAM1_PWD_N */ + >; + }; + + isp0_pmx_func: isp0_pmx_func { + pinctrl-single,pins = < + 0x018 MUX_M1 /* ISP_CLK0 */ + 0x024 MUX_M1 /* ISP_SCL0 */ + 0x028 MUX_M1 /* ISP_SDA0 */ + >; + }; + + isp1_pmx_func: isp1_pmx_func { + pinctrl-single,pins = < + 0x01c MUX_M1 /* ISP_CLK1 */ + 0x02c MUX_M1 /* ISP_SCL1 */ + 0x030 MUX_M1 /* ISP_SDA1 */ + >; + }; + }; + + pmx1: pinmux@fff11000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfff11000 0x0 0x73c>; + #gpio-range-cells = <0x3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 46 0>; + + pwr_key_pmx_func: pwr_key_pmx_func { + pinctrl-single,pins = < + 0x064 MUX_M0 /* GPIO_203 */ + >; + }; + + pd_pmx_func: pd_pmx_func{ + pinctrl-single,pins = < + 0x080 MUX_M0 /* GPIO_221 */ + >; + }; + + i2s2_pmx_func: i2s2_pmx_func { + pinctrl-single,pins = < + 0x050 MUX_M1 /* I2S2_DI */ + 0x054 MUX_M1 /* I2S2_DO */ + 0x058 MUX_M1 /* I2S2_XCLK */ + 0x05c MUX_M1 /* I2S2_XFS */ + >; + }; + + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x094 MUX_M1 /* SPI0_CLK */ + 0x098 MUX_M1 /* SPI0_DI */ + 0x09c MUX_M1 /* SPI0_DO */ + 0x0a0 MUX_M1 /* SPI0_CS0_N */ + >; + }; + + spi2_pmx_func: spi2_pmx_func { + pinctrl-single,pins = < + 0x710 MUX_M1 /* SPI2_CLK */ + 0x714 MUX_M1 /* SPI2_DI */ + 0x718 MUX_M1 /* SPI2_DO */ + 0x71c MUX_M1 /* SPI2_CS0_N */ + >; + }; + + spi3_pmx_func: spi3_pmx_func { + pinctrl-single,pins = < + 0x72c MUX_M1 /* SPI3_CLK */ + 0x730 MUX_M1 /* SPI3_DI */ + 0x734 MUX_M1 /* SPI3_DO */ + 0x738 MUX_M1 /* SPI3_CS0_N */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x020 MUX_M1 /* I2C0_SCL */ + 0x024 MUX_M1 /* I2C0_SDA */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x028 MUX_M1 /* I2C1_SCL */ + 0x02c MUX_M1 /* I2C1_SDA */ + >; + }; + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0x030 MUX_M1 /* I2C2_SCL */ + 0x034 MUX_M1 /* I2C2_SDA */ + >; + }; + + pcie_clkreq_pmx_func: pcie_clkreq_pmx_func { + pinctrl-single,pins = < + 0x084 MUX_M1 /* PCIE0_CLKREQ_N */ + >; + }; + + gpio185_pmx_func: gpio185_pmx_func { + pinctrl-single,pins = <0x01C 0x1>; + }; + + gpio185_pmx_idle: gpio185_pmx_idle { + pinctrl-single,pins = <0x01C 0x0>; + }; }; pmx2: pinmux@e896c800 { @@ -184,6 +331,180 @@ DRIVE7_02MA DRIVE6_MASK >; }; + + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x014 0x0 /* I2C3_SCL */ + 0x018 0x0 /* I2C3_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + i2c4_cfg_func: i2c4_cfg_func { + pinctrl-single,pins = < + 0x040 0x0 /* I2C4_SCL */ + 0x044 0x0 /* I2C4_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam0_rst_cfg_func: cam0_rst_cfg_func { + pinctrl-single,pins = < + 0x714 0x0 /* CAM0_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam1_rst_cfg_func: cam1_rst_cfg_func { + pinctrl-single,pins = < + 0x04C 0x0 /* CAM1_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam0_pwd_n_cfg_func: cam0_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x09C 0x0 /* CAM0_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + cam1_pwd_n_cfg_func: cam1_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x048 0x0 /* CAM1_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp0_cfg_func: isp0_cfg_func { + pinctrl-single,pins = < + 0x01C 0x0 /* ISP_CLK0 */ + 0x028 0x0 /* ISP_SCL0 */ + 0x02C 0x0 /* ISP_SDA0 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp1_cfg_func: isp1_cfg_func { + pinctrl-single,pins = < + 0x020 0x0 /* ISP_CLK1 */ + 0x030 0x0 /* ISP_SCL1 */ + 0x034 0x0 /* ISP_SDA1 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; }; pmx5: pinmux@fc182000 { @@ -338,22 +659,311 @@ }; }; - pmx1: pinmux@fff11000 { - compatible = "pinctrl-single"; - reg = <0x0 0xfff11000 0x0 0x73c>; - #gpio-range-cells = <0x3>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <0x20>; - pinctrl-single,function-mask = <0x7>; - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 46 0>; - }; - pmx16: pinmux@fff11800 { compatible = "pinconf-single"; reg = <0x0 0xfff11800 0x0 0x73c>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + pwr_key_cfg_func: pwr_key_cfg_func { + pinctrl-single,pins = < + 0x090 0x0 /* GPIO_203 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + usb_cfg_func: usb_cfg_func { + pinctrl-single,pins = < + 0x0AC 0x0 /* GPIO_221 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + spi0_cfg_func: spi0_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* SPI0_DI */ + 0x0cc 0x0 /* SPI0_DO */ + 0x0d0 0x0 /* SPI0_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + spi2_cfg_func: spi2_cfg_func { + pinctrl-single,pins = < + 0x714 0x0 /* SPI2_DI */ + 0x718 0x0 /* SPI2_DO */ + 0x71c 0x0 /* SPI2_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + spi3_cfg_func: spi3_cfg_func { + pinctrl-single,pins = < + 0x730 0x0 /* SPI3_DI */ + 0x734 0x0 /* SPI3_DO */ + 0x738 0x0 /* SPI3_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + spi0_clk_cfg_func: spi0_clk_cfg_func { + pinctrl-single,pins = < + 0x0c4 0x0 /* SPI0_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_10MA DRIVE6_MASK + >; + }; + + spi2_clk_cfg_func: spi2_clk_cfg_func { + pinctrl-single,pins = < + 0x710 0x0 /* SPI2_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_10MA DRIVE6_MASK + >; + }; + + spi3_clk_cfg_func: spi3_clk_cfg_func { + pinctrl-single,pins = < + 0x72c 0x0 /* SPI3_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_10MA DRIVE6_MASK + >; + }; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x04c 0x0 /* I2C0_SCL */ + 0x050 0x0 /* I2C0_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x054 0x0 /* I2C1_SCL */ + 0x058 0x0 /* I2C1_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0x05c 0x0 /* I2C2_SCL */ + 0x060 0x0 /* I2C2_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + pcie_clkreq_cfg_func: pcie_clkreq_cfg_func { + pinctrl-single,pins = < + 0x0b0 0x0 + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + i2s2_cfg_func: i2s2_cfg_func { + pinctrl-single,pins = < + 0x07c 0x0 /* I2S2_DI */ + 0x080 0x0 /* I2S2_DO */ + 0x084 0x0 /* I2S2_XCLK */ + 0x088 0x0 /* I2S2_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + gpio185_cfg_func: gpio185_cfg_func { + pinctrl-single,pins = <0x048 0>; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x00 0x70>; + pinctrl-single,slew-rate = <0x0 0x80>; + }; + + gpio185_cfg_idle: gpio185_cfg_idle { + pinctrl-single,pins = <0x048 0>; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x00 0x70>; + pinctrl-single,slew-rate = <0x0 0x80>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 405acaa3e9dd..4aed8d440b3a 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -318,7 +318,7 @@ status = "disabled"; }; - lbc: localbus@80380000 { + lbc: local-bus@80380000 { compatible = "hisilicon,hisi-localbus", "simple-bus"; reg = <0x0 0x80380000 0x0 0x10000>; status = "disabled"; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 7980709e21ff..7deca5f763d5 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -335,7 +335,6 @@ reg = <0x0 0xa0040000 0x0 0x20000>; #iommu-cells = <1>; dma-coherent; - smmu-cb-memtype = <0x0 0x1>; hisilicon,broken-prefetch-cmd; status = "disabled"; }; @@ -737,9 +736,8 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 - 0x5ff0000 0x01000000 0 0 0 0xb7ff0000 - 0 0x10000>; + ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000>, + <0x01000000 0 0 0 0xb7ff0000 0 0x10000>; #interrupt-cells = <1>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 7832d9cdec21..2172d8071181 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1166,7 +1166,6 @@ reg = <0x0 0xa0040000 0x0 0x20000>; #iommu-cells = <1>; dma-coherent; - smmu-cb-memtype = <0x0 0x1>; hisilicon,broken-prefetch-cmd; status = "disabled"; }; @@ -1181,7 +1180,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; p0_smmu_alg_b: iommu@8d0040000 { compatible = "arm,smmu-v3"; @@ -1194,7 +1192,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; p1_smmu_alg_a: iommu@400d0040000 { compatible = "arm,smmu-v3"; @@ -1207,7 +1204,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; p1_smmu_alg_b: iommu@408d0040000 { compatible = "arm,smmu-v3"; @@ -1220,7 +1216,6 @@ #iommu-cells = <1>; dma-coherent; hisilicon,broken-prefetch-cmd; - /* smmu-cb-memtype = <0x0 0x1>;*/ }; soc { @@ -1708,8 +1703,8 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000 - 0x01000000 0 0 0 0xaf7f0000 0 0x10000>; + ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000>, + <0x01000000 0 0 0 0xaf7f0000 0 0x10000>; #interrupt-cells = <1>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4 diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 296eceec4276..3a052540605b 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -2,3 +2,4 @@ dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb +dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts new file mode 100644 index 000000000000..5f56e2697fee --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "eASIC N5X SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; +}; + +&clkmgr { + compatible = "intel,easic-n5x-clkmgr"; +}; + +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index daffe136c523..5fc613d24151 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -67,8 +67,6 @@ /* J6 */ &sata { status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; }; /* U11 */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index f5ec3b644769..d239ab70ed99 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -205,7 +205,7 @@ }; partition@20000 { - label = "u-boot"; + label = "a53-firmware"; reg = <0x20000 0x160000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index d5b6c0a1c54a..7a2df148c6a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -458,6 +458,8 @@ reg = <0xe0000 0x178>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&nb_periph_clk 1>; + phys = <&comphy2 0>; + phy-names = "sata-phy"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi index 623010f3ca89..d9bbbfa4b4eb 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -27,3 +27,8 @@ #clock-cells = <1>; }; }; + +&ap_sdhci0 { + compatible = "marvell,armada-ap807-sdhci"; +}; + diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 12e477f1aeb9..6614472100c2 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -281,6 +281,9 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 20>; + marvell,pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 7c329e173a6d..64179a372ecf 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -234,12 +234,17 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; @@ -250,12 +255,17 @@ gpio-controller; #gpio-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + marvell,pwm-offset = <0x1f0>; + #pwm-cells = <2>; interrupt-controller; interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts index ce49a70d88a0..79020e6d2792 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dts +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -113,6 +113,8 @@ &ap_sdhci0 { pinctrl-names = "default"; bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; vqmmc-supply = <&ap0_reg_sd_vccq>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 18f7b46c4095..deba27ab7657 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi index 370f309d32de..9bdf5145966c 100644 --- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi @@ -189,6 +189,23 @@ #clock-cells = <1>; }; + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt6779-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_PMIC_AP>; + clock-names = "spi", "wrap"; + }; + + devapc: devapc@10207000 { + compatible = "mediatek,mt6779-devapc"; + reg = <0 0x10207000 0 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>; + clock-names = "devapc-infra-clock"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt6779-uart", "mediatek,mt6577-uart"; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 5b9ec032ce8d..7c6d871538a6 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -698,6 +698,8 @@ clocks = <&pericfg CLK_PERI_MSDC30_1_PD>, <&topckgen CLK_TOP_AXI_SEL>; clock-names = "source", "hclk"; + resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>; + reset-names = "hrst"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index cba2d8933e79..3249c959f76f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -344,6 +344,12 @@ bias-disable; }; }; + + pwm_pins_1: pwm1 { + pins_pwm { + pinmux = <PINMUX_GPIO90__FUNC_PWM_A>; + }; + }; }; &spi0 { @@ -392,3 +398,9 @@ &uart0 { status = "okay"; }; + +&pwm1 { + status = "okay"; + pinctrl-0 = <&pwm_pins_1>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts new file mode 100644 index 000000000000..fb5ee91b6fe0 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + * + * Device-tree for Krane sku0. + * + * SKU is a 8-bit value (0x00 == 0): + * - Bits 7..4: Panel ID: 0x0 (AUO) + * - Bits 3..0: SKU ID: 0x0 (default) + */ + +/dts-v1/; +#include "mt8183-kukui-krane.dtsi" + +/ { + model = "MediaTek krane sku0 board"; + compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183"; +}; + +&panel { + status = "okay"; + compatible = "auo,kd101n80-45na"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts index 47113e275cb5..721d16f9c3b4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts @@ -16,3 +16,8 @@ model = "MediaTek krane sku176 board"; compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; }; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-nl6"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index bf2ad1294dd3..ff56bcfa3370 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -249,6 +249,36 @@ proc-supply = <&mt6358_vproc11_reg>; }; +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + panel: panel@0 { + /* compatible will be set in board dts */ + reg = <0>; + enable-gpios = <&pio 45 0>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pins_default>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + ports { + port { + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -290,6 +320,10 @@ clock-frequency = <100000>; }; +&mipi_tx0 { + status = "okay"; +}; + &mmc0 { status = "okay"; pinctrl-names = "default", "state_uhs"; @@ -547,6 +581,14 @@ }; }; + panel_pins_default: panel_pins_default { + panel_reset { + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>; + output-low; + bias-pull-up; + }; + }; + pwm0_pin_default: pwm0_pin_default { pins1 { pinmux = <PINMUX_GPIO176__FUNC_GPIO176>; @@ -709,6 +751,10 @@ }; }; +&mfg { + domain-supply = <&mt6358_vgpu_reg>; +}; + &soc_data { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 5b782a4769e7..80519a145f13 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -6,7 +6,7 @@ */ #include <dt-bindings/clock/mt8183-clk.h> -#include <dt-bindings/gce/mt8173-gce.h> +#include <dt-bindings/gce/mt8183-gce.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/memory/mt8183-larb-port.h> @@ -360,7 +360,7 @@ #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8183_POWER_DOMAIN_MFG { + mfg: power-domain@MT8183_POWER_DOMAIN_MFG { reg = <MT8183_POWER_DOMAIN_MFG>; #address-cells = <1>; #size-cells = <0>; @@ -661,12 +661,27 @@ compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; #pwm-cells = <2>; clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>, <&infracfg CLK_INFRA_DISP_PWM>; clock-names = "main", "mm"; }; + pwm1: pwm@11006000 { + compatible = "mediatek,mt8183-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&infracfg CLK_INFRA_PWM>, + <&infracfg CLK_INFRA_PWM_HCLK>, + <&infracfg CLK_INFRA_PWM1>, + <&infracfg CLK_INFRA_PWM2>, + <&infracfg CLK_INFRA_PWM3>, + <&infracfg CLK_INFRA_PWM4>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4"; + }; + i2c3: i2c@1100f000 { compatible = "mediatek,mt8183-i2c"; reg = <0 0x1100f000 0 0x1000>, @@ -1011,7 +1026,7 @@ clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; mediatek,larb = <&larb0>; - mediatek,rdma_fifo_size = <5120>; + mediatek,rdma-fifo-size = <5120>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; }; @@ -1023,7 +1038,7 @@ clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; mediatek,larb = <&larb0>; - mediatek,rdma_fifo_size = <2048>; + mediatek,rdma-fifo-size = <2048>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; }; @@ -1055,8 +1070,7 @@ }; gamma0: gamma@14011000 { - compatible = "mediatek,mt8183-disp-gamma", - "mediatek,mt8173-disp-gamma"; + compatible = "mediatek,mt8183-disp-gamma"; reg = <0 0x14011000 0 0x1000>; interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index e12e024de122..9757138a8bbd 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -39,6 +39,7 @@ reg = <0x000>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -49,6 +50,7 @@ reg = <0x100>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -59,6 +61,7 @@ reg = <0x200>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -69,6 +72,7 @@ reg = <0x300>; enable-method = "psci"; clock-frequency = <1701000000>; + cpu-idle-states = <&cpuoff_l &clusteroff_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -79,6 +83,7 @@ reg = <0x400>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -89,6 +94,7 @@ reg = <0x500>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -99,6 +105,7 @@ reg = <0x600>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -109,6 +116,7 @@ reg = <0x700>; enable-method = "psci"; clock-frequency = <2171000000>; + cpu-idle-states = <&cpuoff_b &clusteroff_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -158,6 +166,42 @@ l3_0: l3-cache { compatible = "cache"; }; + + idle-states { + entry-method = "arm,psci"; + cpuoff_l: cpuoff_l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <140>; + min-residency-us = <780>; + }; + cpuoff_b: cpuoff_b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <35>; + exit-latency-us = <145>; + min-residency-us = <720>; + }; + clusteroff_l: clusteroff_l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <60>; + exit-latency-us = <155>; + min-residency-us = <860>; + }; + clusteroff_b: clusteroff_b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <40>; + exit-latency-us = <155>; + min-residency-us = <780>; + }; + }; }; pmu-a55 { @@ -379,6 +423,19 @@ status = "disabled"; }; + nor_flash: spi@11234000 { + compatible = "mediatek,mt8192-nor"; + reg = <0 0x11234000 0 0xe0>; + interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, + <&clk26m>, + <&clk26m>; + clock-names = "spi", "sf", "axi"; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + i2c3: i2c3@11cb0000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11cb0000 0 0x1000>, diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index e6e4d9d60094..b80e95574bef 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -276,6 +276,27 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + apdma: dma-controller@11000480 { + compatible = "mediatek,mt8516-uart-dma", + "mediatek,mt6577-uart-dma"; + reg = <0 0x11000480 0 0x80>, + <0 0x11000500 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>, + <0 0x11000980 0 0x80>, + <0 0x11000a00 0 0x80>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>; + dma-requests = <6>; + clocks = <&topckgen CLK_TOP_APDMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + uart0: serial@11005000 { compatible = "mediatek,mt8516-uart", "mediatek,mt6577-uart"; @@ -284,6 +305,9 @@ clocks = <&topckgen CLK_TOP_UART0_SEL>, <&topckgen CLK_TOP_UART0>; clock-names = "baud", "bus"; + dmas = <&apdma 0 + &apdma 1>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -295,6 +319,9 @@ clocks = <&topckgen CLK_TOP_UART1_SEL>, <&topckgen CLK_TOP_UART1>; clock-names = "baud", "bus"; + dmas = <&apdma 2 + &apdma 3>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -306,6 +333,9 @@ clocks = <&topckgen CLK_TOP_UART2_SEL>, <&topckgen CLK_TOP_UART2>; clock-names = "baud", "bus"; + dmas = <&apdma 4 + &apdma 5>; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 9296d12d11e9..e13fb1070472 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,4 +9,5 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 6fd2e0542c27..9f5f5e1fa82e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -10,6 +10,725 @@ model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s5_port: port@18 { + reg = <0x18>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6_ep: endpoint { + remote-endpoint = <&i2s6_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + + xbar_dspk1_port: port@1e { + reg = <0x1e>; + + xbar_dspk1_ep: endpoint { + remote-endpoint = <&dspk1_cif_ep>; + }; + }; + + xbar_dspk2_port: port@1f { + reg = <0x1f>; + + xbar_dspk2_ep: endpoint { + remote-endpoint = <&dspk2_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk1_ep>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dspk@2905100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk2_cif_ep: endpoint { + remote-endpoint = <&xbar_dspk2_ep>; + }; + }; + + dspk2_port: port@1 { + reg = <1>; + + dspk2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; + }; + i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221"; @@ -369,4 +1088,27 @@ vin-supply = <&vdd_5v0_sys>; }; + + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, + <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>, + <&xbar_dspk1_port>, <&xbar_dspk2_port>, + /* I/O */ + <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, + <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, + <&dmic3_port>, <&dspk1_port>, <&dspk2_port>; + + label = "jetson-tx2-ape"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 58c51965df47..02b26b39cedc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1678,6 +1678,28 @@ interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>; }; + sound { + status = "disabled"; + + clocks = <&bpmp TEGRA186_CLK_PLLA>, + <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA186_CLK_PLLA>, + <&bpmp TEGRA186_CLK_PLL_A_OUT0>, + <&bpmp TEGRA186_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA186_CLK_PLLA>, + <&bpmp TEGRA186_CLK_PLL_A_OUT0>; + /* + * PLLA supports dynamic ramp. Below initial rate is chosen + * for this to work and oscillate between base rates required + * for 8x and 11.025x sample rate streams. + */ + assigned-clock-rates = <258000000>; + + iommus = <&smmu TEGRA186_SID_APE>; + }; + thermal-zones { a57 { polling-delay = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index d71b7a1140fe..7e7b0eb90c80 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -93,6 +93,10 @@ vclamp-usb-supply = <&vdd_1v8ao>; ports { + usb2-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + usb2-1 { vbus-supply = <&vdd_5v0_sys>; }; @@ -105,6 +109,10 @@ vbus-supply = <&vdd_5v0_sys>; }; + usb3-2 { + vbus-supply = <&vdd_5v0_sys>; + }; + usb3-3 { vbus-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 54d057beec59..2888efc42ba1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -21,6 +21,513 @@ interrupt-controller@2a40000 { status = "okay"; }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@15 { + reg = <0x15>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s4_port: port@17 { + reg = <0x17>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s6_port: port@19 { + reg = <0x19>; + + xbar_i2s6_ep: endpoint { + remote-endpoint = <&i2s6_cif_ep>; + }; + }; + + xbar_dmic3_port: port@1c { + reg = <0x1c>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5658_ep>; + }; + }; + }; + }; + + i2s@2901100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + i2s@2901500 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s6_ep>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; }; i2c@3160000 { @@ -57,6 +564,10 @@ pads { usb2 { lanes { + usb2-0 { + status = "okay"; + }; + usb2-1 { status = "okay"; }; @@ -73,6 +584,10 @@ status = "okay"; }; + usb3-2 { + status = "okay"; + }; + usb3-3 { status = "okay"; }; @@ -81,6 +596,11 @@ }; ports { + usb2-0 { + mode = "host"; + status = "okay"; + }; + usb2-1 { mode = "host"; status = "okay"; @@ -96,6 +616,11 @@ status = "okay"; }; + usb3-2 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + usb3-3 { nvidia,usb2-companion = <3>; maximum-speed = "super-speed"; @@ -107,11 +632,36 @@ usb@3610000 { status = "okay"; - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>, <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; - phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3"; + phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; + }; + + i2c@c250000 { + status = "okay"; + + rt5658: audio-codec@1a { + status = "okay"; + + compatible = "realtek,rt5658"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>; + realtek,jd-src = <2>; + sound-name-prefix = "CVB-RT"; + + port { + rt5658_ep: endpoint { + remote-endpoint = <&i2s1_dap_ep>; + mclk-fs = <256>; + clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>; + }; + }; + }; }; pwm@c340000 { @@ -263,6 +813,47 @@ }; }; + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* XBAR Ports */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, + <&xbar_i2s6_port>, <&xbar_dmic3_port>, + /* BE I/O Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, + <&dmic3_port>; + + label = "jetson-xavier-ape"; + + widgets = + "Microphone", "CVB-RT MIC Jack", + "Microphone", "CVB-RT MIC", + "Headphone", "CVB-RT HP Jack", + "Speaker", "CVB-RT SPK"; + + routing = + /* I2S1 <-> RT5658 */ + "CVB-RT AIF1 Playback", "I2S1 DAP-Playback", + "I2S1 DAP-Capture", "CVB-RT AIF1 Capture", + /* RT5658 Codec controls */ + "CVB-RT HP Jack", "CVB-RT HPO L Playback", + "CVB-RT HP Jack", "CVB-RT HPO R Playback", + "CVB-RT IN1P", "CVB-RT MIC Jack", + "CVB-RT IN2P", "CVB-RT MIC Jack", + "CVB-RT SPK", "CVB-RT SPO Playback", + "CVB-RT DMIC L1", "CVB-RT MIC", + "CVB-RT DMIC L2", "CVB-RT MIC", + "CVB-RT DMIC R1", "CVB-RT MIC", + "CVB-RT DMIC R2", "CVB-RT MIC"; + }; + thermal-zones { cpu { polling-delay = <0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts index 7f97b34216a0..1c3874b677c0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts @@ -1,345 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/input/gpio-keys.h> - #include "tegra194-p3668-0000.dtsi" +#include "tegra194-p3509-0000.dtsi" / { - model = "NVIDIA Jetson Xavier NX Developer Kit"; + model = "NVIDIA Jetson Xavier NX Developer Kit (SD-card)"; compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194"; - - bus@0 { - aconnect@2900000 { - status = "okay"; - - dma-controller@2930000 { - status = "okay"; - }; - - interrupt-controller@2a40000 { - status = "okay"; - }; - }; - - ddc: i2c@3190000 { - status = "okay"; - }; - - i2c@3160000 { - eeprom@57 { - compatible = "atmel,24c02"; - reg = <0x57>; - - label = "system"; - vcc-supply = <&vdd_1v8>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - hda@3510000 { - nvidia,model = "jetson-xavier-nx-hda"; - status = "okay"; - }; - - padctl@3520000 { - status = "okay"; - - pads { - usb2 { - lanes { - usb2-1 { - status = "okay"; - }; - - usb2-2 { - status = "okay"; - }; - }; - }; - - usb3 { - lanes { - usb3-2 { - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-1 { - mode = "host"; - status = "okay"; - }; - - usb2-2 { - mode = "host"; - vbus-supply = <&vdd_5v0_sys>; - status = "okay"; - }; - - usb3-2 { - nvidia,usb2-companion = <1>; - vbus-supply = <&vdd_5v0_sys>; - status = "okay"; - }; - }; - }; - - usb@3610000 { - status = "okay"; - - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, - <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; - phy-names = "usb2-1", "usb2-2", "usb3-2"; - }; - - pwm@32d0000 { - status = "okay"; - }; - - host1x@13e00000 { - display-hub@15200000 { - status = "okay"; - }; - - dpaux@155c0000 { - status = "okay"; - }; - - dpaux@155d0000 { - status = "okay"; - }; - - /* DP0 */ - sor@15b00000 { - status = "okay"; - - avdd-io-hdmi-dp-supply = <&vdd_1v0>; - vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; - - nvidia,dpaux = <&dpaux0>; - }; - - /* HDMI */ - sor@15b40000 { - status = "okay"; - - avdd-io-hdmi-dp-supply = <&vdd_1v0>; - vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; - hdmi-supply = <&vdd_hdmi>; - - nvidia,ddc-i2c-bus = <&ddc>; - nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1) - GPIO_ACTIVE_LOW>; - }; - }; - }; - - pcie@14160000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - phys = <&p2u_hsio_11>; - phy-names = "p2u-0"; - }; - - pcie@141a0000 { - status = "okay"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; - - pcie_ep@141a0000 { - status = "disabled"; - - vddio-pex-ctl-supply = <&vdd_1v8ao>; - - reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; - - nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) - GPIO_ACTIVE_HIGH>; - - phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, - <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, - <&p2u_nvhs_6>, <&p2u_nvhs_7>; - - phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", - "p2u-5", "p2u-6", "p2u-7"; - }; - - fan: fan { - compatible = "pwm-fan"; - pwms = <&pwm6 0 45334>; - - cooling-levels = <0 64 128 255>; - #cooling-cells = <2>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - force-recovery { - label = "Force Recovery"; - gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - debounce-interval = <10>; - }; - - power { - label = "Power"; - gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) - GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_POWER>; - debounce-interval = <10>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - }; - - vdd_5v0_sys: regulator@100 { - compatible = "regulator-fixed"; - regulator-name = "VDD_5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_3v3_sys: regulator@101 { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_3v3_ao: regulator@102 { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_AO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8: regulator@103 { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_hdmi: regulator@104 { - compatible = "regulator-fixed"; - regulator-name = "VDD_5V0_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - thermal-zones { - cpu { - polling-delay = <0>; - polling-delay-passive = <500>; - status = "okay"; - - trips { - cpu_trip_critical: critical { - temperature = <96500>; - hysteresis = <0>; - type = "critical"; - }; - - cpu_trip_hot: hot { - temperature = <70000>; - hysteresis = <2000>; - type = "hot"; - }; - - cpu_trip_active: active { - temperature = <50000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_passive: passive { - temperature = <30000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - cpu-critical { - cooling-device = <&fan 3 3>; - trip = <&cpu_trip_critical>; - }; - - cpu-hot { - cooling-device = <&fan 2 2>; - trip = <&cpu_trip_hot>; - }; - - cpu-active { - cooling-device = <&fan 1 1>; - trip = <&cpu_trip_active>; - }; - - cpu-passive { - cooling-device = <&fan 0 0>; - trip = <&cpu_trip_passive>; - }; - }; - }; - - gpu { - polling-delay = <0>; - polling-delay-passive = <500>; - status = "okay"; - - trips { - gpu_alert0: critical { - temperature = <99000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - aux { - polling-delay = <0>; - polling-delay-passive = <500>; - status = "okay"; - - trips { - aux_alert0: critical { - temperature = <90000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts new file mode 100644 index 000000000000..238fd98e8e45 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra194-p3668-0001.dtsi" +#include "tegra194-p3509-0000.dtsi" + +/ { + model = "NVIDIA Jetson Xavier NX Developer Kit (eMMC)"; + compatible = "nvidia,p3509-0000+p3668-0001", "nvidia,tegra194"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi new file mode 100644 index 000000000000..d1d77220154f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + bus@0 { + aconnect@2900000 { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + + ddc: i2c@3190000 { + status = "okay"; + }; + + i2c@3160000 { + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + hda@3510000 { + nvidia,model = "jetson-xavier-nx-hda"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-1 { + status = "okay"; + }; + + usb2-2 { + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-2 { + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-2 { + mode = "host"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + }; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-1", "usb2-2", "usb3-2"; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + pwm@32d0000 { + status = "okay"; + }; + + host1x@13e00000 { + display-hub@15200000 { + status = "okay"; + }; + + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* HDMI */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1) + GPIO_ACTIVE_LOW>; + }; + }; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_11>; + phy-names = "p2u-0"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie_ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm6 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + debounce-interval = <10>; + }; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + vdd_5v0_sys: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_ao: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_hdmi: regulator@104 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + thermal-zones { + cpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + gpu_alert0: critical { + temperature = <99000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aux { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + aux_alert0: critical { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi index 0dc8304a2edd..7da3d48cb410 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi @@ -1,79 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "tegra194.dtsi" - -#include <dt-bindings/mfd/max77620.h> +#include "tegra194-p3668.dtsi" / { - model = "NVIDIA Jetson Xavier NX"; + model = "NVIDIA Jetson Xavier NX (SD-card)"; compatible = "nvidia,p3668-0000", "nvidia,tegra194"; - aliases { - ethernet0 = "/bus@0/ethernet@2490000"; - i2c0 = "/bpmp/i2c"; - i2c1 = "/bus@0/i2c@3160000"; - i2c2 = "/bus@0/i2c@c240000"; - i2c3 = "/bus@0/i2c@3180000"; - i2c4 = "/bus@0/i2c@3190000"; - i2c5 = "/bus@0/i2c@31c0000"; - i2c6 = "/bus@0/i2c@c250000"; - i2c7 = "/bus@0/i2c@31e0000"; - mmc0 = "/bus@0/mmc@3460000"; - rtc0 = "/bpmp/i2c/pmic@3c"; - rtc1 = "/bus@0/rtc@c2a0000"; - serial0 = &tcu; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = "serial0:115200n8"; - }; - bus@0 { - ethernet@2490000 { - status = "okay"; - - phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; - phy-handle = <&phy>; - phy-mode = "rgmii-id"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy: phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; - #phy-cells = <0>; - }; - }; - }; - - memory-controller@2c00000 { - status = "okay"; - }; - - serial@3100000 { - status = "okay"; - }; - - i2c@3160000 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - - label = "module"; - vcc-supply = <&vdd_1v8ls>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - /* SDMMC1 (SD/MMC) */ mmc@3400000 { status = "okay"; @@ -82,216 +14,6 @@ disable-wp; vmmc-supply = <&vdd_3v3_sd>; }; - - padctl@3520000 { - avdd-usb-supply = <&vdd_usb_3v3>; - vclamp-usb-supply = <&vdd_1v8ao>; - - ports { - usb2-1 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-3 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb3-0 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb3-3 { - vbus-supply = <&vdd_5v0_sys>; - }; - }; - }; - - rtc@c2a0000 { - status = "okay"; - }; - - pmc@c360000 { - nvidia,invert-interrupt; - }; - }; - - bpmp { - i2c { - status = "okay"; - - pmic: pmic@3c { - compatible = "maxim,max20024"; - reg = <0x3c>; - - interrupt-parent = <&pmc>; - interrupts = <24 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - - #gpio-cells = <2>; - gpio-controller; - - pinctrl-names = "default"; - pinctrl-0 = <&max20024_default>; - - max20024_default: pinmux { - gpio0 { - pins = "gpio0"; - function = "gpio"; - }; - - gpio1 { - pins = "gpio1"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; - }; - - gpio2 { - pins = "gpio2"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; - }; - - gpio3 { - pins = "gpio3"; - function = "fps-out"; - maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; - }; - - gpio4 { - pins = "gpio4"; - function = "32k-out1"; - drive-push-pull = <1>; - }; - - gpio6 { - pins = "gpio6"; - function = "gpio"; - drive-push-pull = <1>; - }; - - gpio7 { - pins = "gpio7"; - function = "gpio"; - drive-push-pull = <0>; - }; - }; - - fps { - fps0 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - - fps1 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; - maxim,shutdown-fps-time-period-us = <640>; - maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; - }; - - fps2 { - maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; - maxim,shutdown-fps-time-period-us = <640>; - }; - }; - - regulators { - in-sd0-supply = <&vdd_5v0_sys>; - in-sd1-supply = <&vdd_5v0_sys>; - in-sd2-supply = <&vdd_5v0_sys>; - in-sd3-supply = <&vdd_5v0_sys>; - in-sd4-supply = <&vdd_5v0_sys>; - - in-ldo0-1-supply = <&vdd_5v0_sys>; - in-ldo2-supply = <&vdd_5v0_sys>; - in-ldo3-5-supply = <&vdd_5v0_sys>; - in-ldo4-6-supply = <&vdd_5v0_sys>; - in-ldo7-8-supply = <&vdd_1v8ls>; - - vdd_1v0: sd0 { - regulator-name = "VDDIO_SYS_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8hs: sd1 { - regulator-name = "VDDIO_SYS_1V8HS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8ls: sd2 { - regulator-name = "VDDIO_SYS_1V8LS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8ao: sd3 { - regulator-name = "VDDIO_AO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - sd4 { - regulator-name = "VDD_DDR_1V1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo0 { - regulator-name = "VDD_RTC"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo2 { - regulator-name = "VDDIO_AO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo3 { - regulator-name = "VDD_EMMC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_usb_3v3: ldo5 { - regulator-name = "VDD_USB_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6 { - regulator-name = "VDD_SDIO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7 { - regulator-name = "AVDD_CSI_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - }; - }; - }; }; vdd_3v3_sd: regulator@0 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi new file mode 100644 index 000000000000..b7808648cfe4 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194-p3668.dtsi" + +/ { + model = "NVIDIA Jetson Xavier NX (eMMC)"; + compatible = "nvidia,p3668-0001", "nvidia,tegra194"; + + bus@0 { + /* SDMMC4 (eMMC) */ + mmc@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8ls>; + vmmc-supply = <&vdd_emmc_3v3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi new file mode 100644 index 000000000000..4f12721c332b --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194.dtsi" + +#include <dt-bindings/mfd/max77620.h> + +/ { + aliases { + ethernet0 = "/bus@0/ethernet@2490000"; + i2c0 = "/bpmp/i2c"; + i2c1 = "/bus@0/i2c@3160000"; + i2c2 = "/bus@0/i2c@c240000"; + i2c3 = "/bus@0/i2c@3180000"; + i2c4 = "/bus@0/i2c@3190000"; + i2c5 = "/bus@0/i2c@31c0000"; + i2c6 = "/bus@0/i2c@c250000"; + i2c7 = "/bus@0/i2c@31e0000"; + mmc0 = "/bus@0/mmc@3460000"; + rtc0 = "/bpmp/i2c/pmic@3c"; + rtc1 = "/bus@0/rtc@c2a0000"; + serial0 = &tcu; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + #phy-cells = <0>; + }; + }; + }; + + memory-controller@2c00000 { + status = "okay"; + }; + + serial@3100000 { + status = "okay"; + }; + + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + padctl@3520000 { + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + ports { + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max20024"; + reg = <0x3c>; + + interrupt-parent = <&pmc>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max20024_default>; + + max20024_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v8ls>; + + vdd_1v0: sd0 { + regulator-name = "VDDIO_SYS_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8hs: sd1 { + regulator-name = "VDDIO_SYS_1V8HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ls: sd2 { + regulator-name = "VDDIO_SYS_1V8LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ao: sd3 { + regulator-name = "VDDIO_AO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDDIO_AO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_emmc_3v3: ldo3 { + regulator-name = "VDD_EMMC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_usb_3v3: ldo5 { + regulator-name = "VDD_USB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-name = "VDD_SDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "AVDD_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 25f36d6118f8..9449156fae39 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -609,6 +609,34 @@ status = "disabled"; }; + spi@3270000 { + compatible = "nvidia,tegra194-qspi"; + reg = <0x3270000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_QSPI0>, + <&bpmp TEGRA194_CLK_QSPI0_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA194_RESET_QSPI0>; + reset-names = "qspi"; + status = "disabled"; + }; + + spi@3300000 { + compatible = "nvidia,tegra194-qspi"; + reg = <0x3300000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_QSPI1>, + <&bpmp TEGRA194_CLK_QSPI1_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA194_RESET_QSPI1>; + reset-names = "qspi"; + status = "disabled"; + }; + pwm1: pwm@3280000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; @@ -2323,6 +2351,26 @@ method = "smc"; }; + sound { + status = "disabled"; + + clocks = <&bpmp TEGRA194_CLK_PLLA>, + <&bpmp TEGRA194_CLK_PLLA_OUT0>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA194_CLK_PLLA>, + <&bpmp TEGRA194_CLK_PLLA_OUT0>, + <&bpmp TEGRA194_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA194_CLK_PLLA>, + <&bpmp TEGRA194_CLK_PLLA_OUT0>; + /* + * PLLA supports dynamic ramp. Below initial rate is chosen + * for this to work and oscillate between base rates required + * for 8x and 11.025x sample rate streams. + */ + assigned-clock-rates = <258000000>; + }; + tcu: tcu { compatible = "nvidia,tegra194-tcu"; mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 69102dcea8b0..497635af7fab 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -126,5 +126,304 @@ interrupt-controller@702f9000 { status = "okay"; }; + + ahub@702d0800 { + status = "okay"; + + admaif@702d0000 { + status = "okay"; + }; + + i2s@702d1000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + ports { + xbar_i2s1_port: port@a { + reg = <0xa>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@b { + reg = <0xb>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s3_port: port@c { + reg = <0xc>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@d { + reg = <0xd>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s5_port: port@e { + reg = <0xe>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_dmic1_port: port@f { + reg = <0xf>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@10 { + reg = <0x10>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic3_port: port@11 { + reg = <0x11>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + }; + }; + }; + + sound { + compatible = "nvidia,tegra210-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, + <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, + <&xbar_dmic2_port>, <&xbar_dmic3_port>, + /* I/O DAP Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, + <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; + + label = "jetson-tx1-ape"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 6a877decffc1..14c128a5e248 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -636,6 +636,162 @@ interrupt-controller@702f9000 { status = "okay"; }; + + ahub@702d0800 { + status = "okay"; + + admaif@702d0000 { + status = "okay"; + }; + + i2s@702d1200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint@0 { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint@0 { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint@0 { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint@0 { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint@0 { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + ports { + xbar_i2s3_port: port@c { + reg = <0xc>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@d { + reg = <0xd>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_dmic1_port: port@f { + reg = <0xf>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@10 { + reg = <0x10>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + }; + }; + }; + + spi@70410000 { + status = "okay"; + + flash@0 { + compatible = "spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; }; clk32k_in: clock@0 { @@ -870,4 +1026,23 @@ vin-supply = <&vdd_5v0_sys>; }; + + sound { + compatible = "nvidia,tegra210-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s3_port>, <&xbar_i2s4_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, + /* I/O DAP Ports */ + <&i2s3_port>, <&i2s4_port>, + <&dmic1_port>, <&dmic2_port>; + + label = "jetson-nano-ape"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 4fbf8c15b0a1..26b3f98a211c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -997,6 +997,7 @@ <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + power-domains = <&pd_sor>; status = "disabled"; }; @@ -1043,6 +1044,7 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; resets = <&tegra_car 142>; reset-names = "padctl"; + nvidia,pmc = <&tegra_pmc>; status = "disabled"; @@ -1307,6 +1309,32 @@ status = "disabled"; }; + soctherm: thermal-sensor@700e2000 { + compatible = "nvidia,tegra210-soctherm"; + reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ + <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ + reg-names = "soctherm-reg", "car-reg"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; + clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, + <&tegra_car TEGRA210_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + + throttle-cfgs { + throttle_heavy: heavy { + nvidia,priority = <100>; + nvidia,cpu-throt-percent = <85>; + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + + #cooling-cells = <2>; + }; + }; + }; + mipi: mipi@700e3000 { compatible = "nvidia,tegra210-mipi"; reg = <0x0 0x700e3000 0x0 0x100>; @@ -1425,6 +1453,91 @@ "rx9", "tx9", "rx10", "tx10"; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif1_port: port@0 { + reg = <0>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@1 { + reg = <1>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@2 { + reg = <2>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@3 { + reg = <3>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@4 { + reg = <4>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@5 { + reg = <5>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@6 { + reg = <6>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@7 { + reg = <7>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@8 { + reg = <8>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@9 { + reg = <9>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + }; }; tegra_i2s1: i2s@702d1000 { @@ -1527,6 +1640,89 @@ sound-name-prefix = "DMIC3"; status = "disabled"; }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + port@5 { + reg = <0x5>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + }; }; }; @@ -1536,8 +1732,9 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car TEGRA210_CLK_QSPI>; - clock-names = "qspi"; + clocks = <&tegra_car TEGRA210_CLK_QSPI>, + <&tegra_car TEGRA210_CLK_QSPI_PM>; + clock-names = "qspi", "qspi_out"; resets = <&tegra_car 211>; reset-names = "qspi"; dmas = <&apbdma 5>, <&apbdma 5>; @@ -1692,44 +1889,18 @@ &{/cpus/cpu@2} &{/cpus/cpu@3}>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-parent = <&gic>; - arm,no-tick-in-suspend; - }; - - soctherm: thermal-sensor@700e2000 { - compatible = "nvidia,tegra210-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ - <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ - reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "thermal", "edp"; - clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, - <&tegra_car TEGRA210_CLK_SOC_THERM>; - clock-names = "tsensor", "soctherm"; - resets = <&tegra_car 78>; - reset-names = "soctherm"; - #thermal-sensor-cells = <1>; + sound { + status = "disabled"; - throttle-cfgs { - throttle_heavy: heavy { - nvidia,priority = <100>; - nvidia,cpu-throt-percent = <85>; - nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + clock-names = "pll_a", "plla_out0"; - #cooling-cells = <2>; - }; - }; + assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>, + <&tegra_car TEGRA210_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA210_CLK_EXTERN1>; + assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>; + assigned-clock-rates = <368640000>, <49152000>, <12288000>; }; thermal-zones { @@ -1866,4 +2037,18 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + arm,no-tick-in-suspend; + }; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 5113fac80b7a..549a7a2151d4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,19 +1,27 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-cityman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-msft-lumia-octagon-cityman.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-ivy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-karin.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb @@ -43,9 +51,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 3a9538e1ec97..6aef0c2e4f0a 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -301,6 +301,10 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts new file mode 100644 index 000000000000..a8dffc8c64ea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +/* As the names may imply, there is quite a bunch of duplication there. */ +#include "msm8994-sony-xperia-kitakami-karin.dts" + +/ { + model = "Sony Xperia Z4 Tablet (Wi-Fi)"; + compatible = "sony,karin_windy", "qcom,apq8094"; + + /* + * This model uses the APQ variant of MSM8994 (APQ8094). + * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here. + */ + qcom,msm-id = <253 0x20000>, <253 0x20001>; +}; + +/delete-node/ &pm8994_l1; +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts new file mode 100644 index 000000000000..540b1fa4b260 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Alcatel OneTouch Idol 3 (4.7)"; + compatible = "alcatel,idol347", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp_i2c5 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + accelerometer@f { + compatible = "kionix,kxtj21009"; + reg = <0x0f>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&proximity_int_default>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&msmgpio>; + interrupts = <97 IRQ_TYPE_EDGE_RISING>, + <98 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + }; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gyro_int_default: gyro-int-default { + pins = "gpio97", "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + proximity_int_default: proximity-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <6>; + bias-pull-up; + }; + + usb_id_default: usb-id-default { + pins = "gpio69"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts new file mode 100644 index 000000000000..cee451e59385 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Asus Zenfone 2 Laser"; + compatible = "asus,z00l", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio117"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts new file mode 100644 index 000000000000..27845189ac2b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "BQ Aquaris X5 (Longcheer L8910)"; + compatible = "longcheer,l8910", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-names = "default"; + pinctrl-0 = <&button_backlight_default>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak09911"; + reg = <0x0d>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + button_backlight_default: button-backlight-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio111"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default { + pins = "gpio110"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 4dc437f13fa5..7dedb91b9930 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -220,6 +220,22 @@ bias-disable; }; + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + i2c4_default: i2c4-default { pins = "gpio14", "gpio15"; function = "blsp_i2c4"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index f91269492d72..230ba3ce3277 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -106,6 +106,9 @@ interrupt-parent = <&msmgpio>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + pinctrl-names = "default"; pinctrl-0 = <&accel_int_default>; }; @@ -113,6 +116,9 @@ magnetometer@12 { compatible = "bosch,bmc150_magn"; reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; }; }; @@ -126,6 +132,10 @@ pinctrl-1 = <&mdss_sleep>; }; +&mdss { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index e39c04d977c2..dd35c3344358 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -38,7 +38,7 @@ &pronto { iris { - compatible = "qcom,wcn3680"; + compatible = "qcom,wcn3660b"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 402e891a84ab..5353da521974 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -56,7 +56,7 @@ no-map; }; - reserved@8668000 { + reserved@86680000 { reg = <0x0 0x86680000 0x0 0x80000>; no-map; }; @@ -69,7 +69,7 @@ qcom,client-id = <1>; }; - rfsa@867e00000 { + rfsa@867e0000 { reg = <0x0 0x867e0000 0x0 0x20000>; no-map; }; @@ -913,6 +913,7 @@ }; mdss: mdss@1a00000 { + status = "disabled"; compatible = "qcom,mdss"; reg = <0x01a00000 0x1000>, <0x01ac8000 0x3000>; @@ -1528,6 +1529,21 @@ status = "disabled"; }; + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_spi3: spi@78b7000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x500>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 5969b5cfdc85..23cdcc9f7c72 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" / { model = "LG Nexus 5X"; @@ -44,7 +46,7 @@ }; &rpm_requests { - pm8994-regulators { + pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s1>; @@ -53,15 +55,17 @@ vdd_l4_27_31-supply = <&pm8994_s3>; vdd_l5_7-supply = <&pm8994_s3>; vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; vdd_lvs1_2 = <&pm8994_s4>; + /* S1, S2, S6 and S12 are managed by RPMPD */ + pm8994_s1: s1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; @@ -93,6 +97,8 @@ regulator-max-microvolt = <1000000>; }; + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + pm8994_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -113,18 +119,14 @@ regulator-max-microvolt = <1225000>; }; - pm8994_l5: l5 { - /* TODO */ - }; + /* L5 is inaccessible from RPM */ pm8994_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l7: l7 { - /* TODO */ - }; + /* L7 is inaccessible from RPM */ pm8994_l8: l8 { regulator-min-microvolt = <1800000>; @@ -266,9 +268,22 @@ */ }; }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 {}; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass {}; + }; }; -&sdhc_1 { +&sdhc1 { status = "okay"; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts new file mode 100644 index 000000000000..5322b9ce5839 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950"; + compatible = "microsoft,talkman", "qcom,msm8992"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts deleted file mode 100644 index c337a86a5c77..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2020, Konrad Dybcio - */ - -/dts-v1/; - -#include "msm8992.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/gpio-keys.h> - -/ { - model = "Microsoft Lumia 950"; - compatible = "microsoft,talkman", "qcom,msm8992"; - - /* Most Lumia 950 users use GRUB to load their kernels, - * hence there is no need for msm-id and friends. - */ - - /* This enables graphical output via bootloader-enabled display. - * acpi=no is required due to WP platforms having ACPI support, but - * only for Windows-based OSes. - */ - chosen { - bootargs = "earlycon=efifb console=efifb acpi=no"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - }; -}; - -&blsp_i2c1 { - status = "okay"; - - rmi4-i2c-dev@4b { - compatible = "syna,rmi4-i2c"; - reg = <0x4b>; - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&tlmm>; - interrupts = <77 IRQ_TYPE_EDGE_FALLING>; - - rmi4-f01@1 { - reg = <0x01>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - syna,clip-x-low = <0>; - syna,clip-x-high = <1440>; - syna,clip-y-low = <0>; - syna,clip-y-high = <2560>; - }; - }; -}; - -&sdhc_1 { - status = "okay"; - - mmc-hs200-1_8v; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 4f64ca3ea1ef..357d55496e75 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -70,21 +70,6 @@ pmsg-size = <0x20000>; }; - continuous_splash: framebuffer@3401000{ - reg = <0x0 0x3401000 0x0 0x2200000>; - no-map; - }; - - dfps_data_mem: dfps_data_mem@3400000 { - reg = <0x0 0x3400000 0x0 0x1000>; - no-map; - }; - - peripheral_region: peripheral_region@7400000 { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; - }; - modem_region: modem_region@9000000 { reg = <0x0 0x9000000 0x0 0x5a00000>; no-map; @@ -97,43 +82,49 @@ }; }; -&blsp_i2c2 { +&blsp1_i2c2 { status = "okay"; /* Atmel or Synaptics touchscreen */ }; -&blsp_i2c5 { +&blsp1_i2c5 { status = "okay"; - /* Silabs si4705 FM transmitter */ + /* ST lsm6db0 gyro/accelerometer */ }; -&blsp_i2c6 { +&blsp1_i2c6 { status = "okay"; - /* NCI NFC, + /* + * NXP NCI NFC, * TI USB320 Type-C controller, * Pericom 30216a USB (de)mux switch */ }; -&blsp_i2c7 { +&blsp2_i2c1 { status = "okay"; /* cm36686 proximity and ambient light sensor */ }; -&blsp_i2c13 { +&blsp2_i2c5 { status = "okay"; - /* ST lsm6db0 gyro/accelerometer */ + /* Silabs si4705 FM transmitter */ }; &blsp2_uart2 { status = "okay"; }; +&peripheral_region { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -144,24 +135,16 @@ vdd_l4_27_31-supply = <&pm8994_s3>; vdd_l5_7-supply = <&pm8994_s3>; vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&vph_pwr>; + vdd_l13_19_23_24-supply = <&vph_pwr>; vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l17_29-supply = <&vph_pwr>; + vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; vdd_lvs1_2 = <&pm8994_s4>; - pm8994_s1: s1 { - /* unused */ - status = "disabled"; - }; - - pm8994_s2: s2 { - /* unused */ - status = "disabled"; - }; + /* S1, S2, S6 and S12 are managed by RPMPD */ pm8994_s3: s3 { regulator-min-microvolt = <1300000>; @@ -186,6 +169,8 @@ regulator-max-microvolt = <1000000>; }; + /* S8, S9, S10 and S11 - SPMI-managed VDD_APC */ + pm8994_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -206,20 +191,14 @@ regulator-max-microvolt = <1225000>; }; - pm8994_l5: l5 { - /* unused */ - status = "disabled"; - }; + /* L5 is inaccessible from RPM */ pm8994_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - pm8994_l7: l7 { - /* unused */ - status = "disabled"; - }; + /* L7 is inaccessible from RPM */ pm8994_l8: l8 { regulator-min-microvolt = <1800000>; @@ -352,10 +331,31 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; -&sdhc_1 { +&sdhc1 { status = "okay"; mmc-hs400-1_8v; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 0c422af47917..58fe58cc7703 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -2,738 +2,29 @@ /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/qcom,gcc-msm8994.h> +#include "msm8994.dtsi" -/ { - interrupt-parent = <&intc>; +/* 8992 only features 2 A57 cores. */ +/delete-node/ &CPU6; +/delete-node/ &CPU7; +/delete-node/ &cpu6_map; +/delete-node/ &cpu7_map; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CPU4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - next-level-cache = <&L2_1>; - enable-method = "psci"; - L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - }; - }; - - CPU5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - next-level-cache = <&L2_1>; - enable-method = "psci"; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - - core2 { - cpu = <&CPU2>; - }; - - core3 { - cpu = <&CPU3>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU4>; - }; - - core1 { - cpu = <&CPU5>; - }; - }; - }; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-msm8994", "qcom,scm"; - }; - }; - - memory { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "hvc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - smem_region: smem@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; - }; - }; - - sfpb_mutex: hwmutex { - compatible = "qcom,sfpb-mutex"; - syscon = <&sfpb_mutex_regs 0x0 0x100>; - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_region>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - hwlocks = <&sfpb_mutex 3>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - intc: interrupt-controller@f9000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xf9000000 0x1000>, - <0xf9002000 0x1000>; - }; - - apcs: mailbox@f900d000 { - compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; - reg = <0xf900d000 0x2000>; - #mbox-cells = <1>; - }; - - timer@f9020000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0xf9020000 0x1000>; - - frame@f9021000 { - frame-number = <0>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9021000 0x1000>, - <0xf9022000 0x1000>; - }; - - frame@f9023000 { - frame-number = <1>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9023000 0x1000>; - status = "disabled"; - }; - - frame@f9024000 { - frame-number = <2>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9024000 0x1000>; - status = "disabled"; - }; - - frame@f9025000 { - frame-number = <3>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9025000 0x1000>; - status = "disabled"; - }; - - frame@f9026000 { - frame-number = <4>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9026000 0x1000>; - status = "disabled"; - }; - - frame@f9027000 { - frame-number = <5>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9027000 0x1000>; - status = "disabled"; - }; - - frame@f9028000 { - frame-number = <6>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xf9028000 0x1000>; - status = "disabled"; - }; - }; - - usb3: usb@f92f8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0xf92f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>; - clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo"; - - assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>; - assigned-clock-rates = <19200000>, <120000000>; - - power-domains = <&gcc USB30_GDSC>; - qcom,select-utmi-as-pipe-clk; - - dwc3@f9200000 { - compatible = "snps,dwc3"; - reg = <0xf9200000 0xcc00>; - interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; - }; - }; - - sdhc_1: sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on - &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off - &sdc1_rclk_off>; - - regulator-always-on; - bus-width = <8>; - non-removable; - - status = "disabled"; - }; - - sdhc_2: sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - - cd-gpios = <&tlmm 100 0>; - bus-width = <4>; - status = "disabled"; - }; - - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>; - clock-names = "core", "iface"; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c1: i2c@f9923000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9923000 0x500>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c2: i2c@f9924000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9924000 0x500>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c2_default>; - pinctrl-1 = <&i2c2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - /* Somebody was very creative with their numbering scheme downstream... */ - - blsp_i2c13: i2c@f9927000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9927000 0x500>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c13_default>; - pinctrl-1 = <&i2c13_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c6: i2c@f9928000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9928000 0x500>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c6_default>; - pinctrl-1 = <&i2c6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_uart2: serial@f995e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995e000 0x1000>; - interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; - clock-names = "core", "iface"; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_default>; - pinctrl-1 = <&blsp2_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c7: i2c@f9963000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9963000 0x500>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c7_default>; - pinctrl-1 = <&i2c7_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c5: i2c@f9967000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0xf9967000 0x500>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; - clock-frequency = <100000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; - }; - - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - spmi_bus: spmi@fc4c0000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - reg-names = "core", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - sfpb_mutex_regs: syscon@fd484000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "syscon"; - reg = <0xfd484000 0x400>; - }; - - tlmm: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1-uart2-default { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart2_sleep: blsp1-uart2-sleep { - function = "gpio"; - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp2_uart2_default: blsp2-uart2-default { - function = "blsp_uart8"; - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_uart2_sleep: blsp2-uart2-sleep { - function = "gpio"; - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - drive-strength = <2>; - bias-pull-down; - }; - - sdc1_clk_on: clk-on { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <6>; - }; - - sdc1_clk_off: clk-off { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - sdc1_cmd_on: cmd-on { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <6>; - }; - - sdc1_cmd_off: cmd-off { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc1_data_on: data-on { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <6>; - }; - - sdc1_data_off: data-off { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc1_rclk_on: rclk-on { - pins = "sdc1_rclk"; - bias-pull-down; - }; - - sdc1_rclk_off: rclk-off { - pins = "sdc1_rclk"; - bias-pull-down; - }; - - i2c1_default: i2c1-default { - function = "blsp_i2c1"; - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; - - i2c1_sleep: i2c1-sleep { - function = "gpio"; - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; - - i2c2_default: i2c2-default { - function = "blsp_i2c2"; - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - - i2c2_sleep: i2c2-sleep { - function = "gpio"; - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - - i2c5_default: i2c5-default { - /* Don't be fooled! Nobody knows the reason why though... */ - function = "blsp_i2c11"; - pins = "gpio83", "gpio84"; - drive-strength = <2>; - bias-disable; - }; - - i2c5_sleep: i2c5-sleep { - function = "gpio"; - pins = "gpio83", "gpio84"; - drive-strength = <2>; - bias-disable; - }; - - i2c6_default: i2c6-default { - function = "blsp_i2c6"; - pins = "gpio28", "gpio27"; - drive-strength = <2>; - bias-disable; - }; - - i2c6_sleep: i2c6-sleep { - function = "gpio"; - pins = "gpio28", "gpio27"; - drive-strength = <2>; - bias-disable; - }; - - i2c7_default: i2c7-default { - function = "blsp_i2c7"; - pins = "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - - i2c7_sleep: i2c7-sleep { - function = "gpio"; - pins = "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - - i2c13_default: i2c13-default { - /* Not a typo either. */ - function = "blsp_i2c5"; - pins = "gpio23", "gpio24"; - drive-strength = <2>; - bias-disable; - }; - - i2c13_sleep: i2c13-sleep { - function = "gpio"; - pins = "gpio23", "gpio24"; - drive-strength = <2>; - bias-disable; - }; - - sdc2_clk_on: sdc2-clk-on { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - sdc2_clk_off: sdc2-clk-off { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - sdc2_cmd_on: sdc2-cmd-on { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - sdc2_cmd_off: sdc2-cmd-off { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - sdc2_data_on: sdc2-data-on { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - sdc2_data_off: sdc2-data-off { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - }; - - smd_rpm: smd { - compatible = "qcom,smd"; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - qcom,local-pid = <0>; - qcom,remote-pid = <6>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8994"; - qcom,smd-channels = "rpm_requests"; +&rpmcc { + compatible = "qcom,rpmcc-msm8992"; +}; - rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8992"; - #clock-cells = <1>; - }; - }; - }; - }; +&tcsr_mutex { + compatible = "qcom,sfpb-mutex"; +}; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +&timer { + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - status = "okay"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; }; +&tlmm { + compatible = "qcom,msm8992-pinctrl"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts deleted file mode 100644 index ed9034b96013..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-cityman.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2020, Konrad Dybcio - */ - -/dts-v1/; - -#include "msm8994.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" - -/ { - model = "Microsoft Lumia 950 XL"; - compatible = "microsoft,cityman", "qcom,msm8994"; - - /* - * Most Lumia 950XL users use GRUB to load their kernels, - * hence there is no need for msm-id and friends. - */ - - /* - * This enables graphical output via bootloader-enabled display. - * acpi=no is required due to WP platforms having ACPI support, but - * only for Windows-based OSes. - */ - chosen { - bootargs = "earlycon=efifb console=efifb acpi=no"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - }; -}; - -&blsp_i2c1 { - status = "okay"; - - rmi4-i2c-dev@4b { - compatible = "syna,rmi4-i2c"; - reg = <0x4b>; - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&tlmm>; - interrupts = <77 IRQ_TYPE_EDGE_FALLING>; - - rmi4-f01@1 { - reg = <0x01>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - syna,clip-x-low = <0>; - syna,clip-x-high = <1440>; - syna,clip-y-low = <0>; - syna,clip-y-high = <2660>; - }; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&blsp2_uart2 { - status = "okay"; -}; - -&sdhc1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts new file mode 100644 index 000000000000..d0aaf5750c21 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> + */ + +/dts-v1/; + +#include "msm8994.dtsi" +#include "msm8994-msft-lumia-octagon.dtsi" + +/ { + model = "Microsoft Lumia 950 XL"; + compatible = "microsoft,cityman", "qcom,msm8994"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi new file mode 100644 index 000000000000..3a3790a52a2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -0,0 +1,909 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for + * Microsoft Mobile MSM8994 Octagon Platforms + * + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com> + */ + +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/* + * Delete all generic (msm8994.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &mba_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &rmtfs_mem; +/delete-node/ &smem_mem; + +/ { + /* + * Most Lumia 950/XL users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* + * This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + clocks { + compatible = "simple-bus"; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + autorepeat; + + volupkey { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + camsnapkey { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + camfocuskey { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_front_default &hall_back_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-front-sensor { + label = "Hall Effect Front Sensor"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + hall-back-sensor { + label = "Hall Effect Back Sensor"; + gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_MACHINE_COVER>; + linux,can-disable; + }; + }; + + reserved-memory { + /* + * This device being a WP platform has a very different + * memory layout than other Android based devices. + * This memory layout is directly copied from the original + * device UEFI firmware, and adapted based on observations + * using JTAG for the Qualcomm Peripheral Image regions. + */ + + uefi_mem: memory@200000 { + reg = <0 0x200000 0 0x100000>; + no-map; + }; + + mppark_mem: memory@300000 { + reg = <0 0x300000 0 0x80000>; + no-map; + }; + + fbpt_mem: memory@380000 { + reg = <0 0x380000 0 0x1000>; + no-map; + }; + + dbg2_mem: memory@381000 { + reg = <0 0x381000 0 0x4000>; + no-map; + }; + + capsule_mem: memory@385000 { + reg = <0 0x385000 0 0x1000>; + no-map; + }; + + tpmctrl_mem: memory@386000 { + reg = <0 0x386000 0 0x3000>; + no-map; + }; + + uefiinfo_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + reset_mem: memory@389000 { + reg = <0 0x389000 0 0x1000>; + no-map; + }; + + resuncached_mem: memory@38e000 { + reg = <0 0x38e000 0 0x72000>; + no-map; + }; + + disp_mem: memory@400000 { + reg = <0 0x400000 0 0x800000>; + no-map; + }; + + uefistack_mem: memory@c00000 { + reg = <0 0xc00000 0 0x40000>; + no-map; + }; + + cpuvect_mem: memory@c40000 { + reg = <0 0xc40000 0 0x10000>; + no-map; + }; + + rescached_mem: memory@400000 { + reg = <0 0xc50000 0 0xb0000>; + no-map; + }; + + tzapps_mem: memory@6500000 { + reg = <0 0x6500000 0 0x500000>; + no-map; + }; + + smem_mem: memory@6a00000 { + reg = <0 0x6a00000 0 0x200000>; + no-map; + }; + + hyp_mem: memory@6c00000 { + reg = <0 0x6c00000 0 0x100000>; + no-map; + }; + + tz_mem: memory@6d00000 { + reg = <0 0x6d00000 0 0x160000>; + no-map; + }; + + rfsa_adsp_mem: memory@6e60000 { + reg = <0 0x6e60000 0 0x10000>; + no-map; + }; + + rfsa_mpss_mem: memory@6e70000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x6e70000 0 0x10000>; + no-map; + + qcom,client-id = <1>; + }; + + /* + * Value obtained from the device original ACPI DSDT table + * MPSS_EFS / SBL + */ + mba_mem: memory@6e80000 { + reg = <0 0x6e80000 0 0x180000>; + no-map; + }; + + /* + * Peripheral Image loader region begin! + * The region reserved for pil is 0x7000000-0xef00000 + */ + + mpss_mem: memory@7000000 { + reg = <0 0x7000000 0 0x5a00000>; + no-map; + }; + + adsp_mem: memory@ca00000 { + reg = <0 0xca00000 0 0x1800000>; + no-map; + }; + + venus_mem: memory@e200000 { + reg = <0 0xe200000 0 0x500000>; + no-map; + }; + + pil_metadata_mem: memory@e700000 { + reg = <0 0xe700000 0 0x4000>; + no-map; + }; + + memory@e704000 { + reg = <0 0xe704000 0 0x7fc000>; + no-map; + }; + /* Peripheral Image loader region end */ + + cnss_mem: memory@ef00000 { + reg = <0 0xef00000 0 0x300000>; + no-map; + }; + }; +}; + +&blsp1_i2c1 { + status = "okay"; + + rmi4-i2c-dev@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <77 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + syna,clip-x-low = <0>; + syna,clip-x-high = <1440>; + syna,clip-y-low = <0>; + syna,clip-y-high = <2560>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + /* + * This device uses the Texas Instruments TAS2553, however the TAS2552 driver + * seems to work here. In the future a proper driver might need to + * be written for this device. + */ + tas2553: tas2553@40 { + compatible = "ti,tas2552"; + reg = <0x40>; + + vbat-supply = <&vph_pwr>; + iovdd-supply = <&vreg_s4a_1p8>; + avdd-supply = <&vreg_s4a_1p8>; + + enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + ak09912: magnetometer@c { + compatible = "asahi-kasei,ak09912"; + reg = <0xc>; + + interrupt-parent = <&tlmm>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_l18a_2p85>; + vid-supply = <&vreg_lvs2a_1p8>; + }; + + zpa2326: barometer@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + + interrupt-parent = <&tlmm>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + + interrupt-parent = <&tlmm>; + interrupts = <64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vreg_lvs2a_1p8>; + vddio-supply = <&vreg_lvs2a_1p8>; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pn547: pn547@28 { + compatible = "nxp,pn544-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c1 { + status = "okay"; + + sideinteraction: ad7147_captouch@2c { + compatible = "ad,ad7147_captouch"; + reg = <0x2c>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&grip_default>; + pinctrl-1 = <&grip_sleep>; + + interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>; + + button_num = <8>; + touchpad_num = <0>; + wheel_num = <0>; + slider_num = <0>; + + vcc-supply = <&vreg_l18a_2p85>; + }; + + /* + * The QPDS-T900/QPDS-T930 is a customized part built for Nokia + * by Avago. It is very similar to the Avago APDS-9930 with some + * minor differences. In the future a proper driver might need to + * be written for this device. For now this works fine. + */ + qpdst900: qpdst900@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&tlmm>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + + fm_radio: si4705@11 { + compatible = "silabs,si470x"; + reg = <0x11>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>; + }; + + vreg_lpddr_1p1: fan53526a@6c { + compatible = "fcs,fan53526"; + reg = <0x6c>; + + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vph_pwr>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; /* Turning off DDR power doesn't sound good. */ + }; + + /* ANX7816 HDMI bridge (needs MDSS HDMI) */ +}; + +&blsp2_spi4 { + status = "okay"; + + /* + * This device is a Lattice UC120 USB-C PD PHY. + * It is actually a Lattice iCE40 FPGA pre-programmed by + * the device firmware with a specific bitstream + * enabling USB Type C PHY functionality. + * Communication is done via a proprietary protocol over SPI. + * + * TODO: Once a proper driver is available, replace this. + */ + uc120: ice5lp2k@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <5000000>; + cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + qca6174_bt: bluetooth { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&pm8994_gpios { + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; + }; +}; + +&pm8994_pon { + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = <KEY_POWER>; + }; + + volwnkey { + compatible = "qcom,pm8941-resin"; + interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&pmi8994_gpios { + pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>; + pinctrl-names = "default"; + + /* + * This device uses a TI HD3SS460 Type-C MUX + * As this device has no driver currently, + * the configuration for USB Face Up is set-up here. + * + * TODO: remove once a driver is available + * TODO: add VBUS GPIO 5 + */ + hd3ss460_pol: pol_low { + pins = "gpio8"; + drive-strength = <3>; + bias-pull-down; + }; + + hd3ss460_amsel: amsel_high { + pins = "gpio9"; + drive-strength = <1>; + bias-pull-up; + }; + + hd3ss460_en: en_high { + pins = "gpio10"; + drive-strength = <1>; + bias-pull-up; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + /* These values were taken from the original firmware ACPI tables */ + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p0>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s5a_2p15>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + vreg_s3a_1p3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + vreg_s5a_2p15: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + vreg_s7a_1p0: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l2a_1p25: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <4160>; + }; + + vreg_l3a_1p2: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l4a_1p225: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <1000>; + }; + + /* L7 is inaccessible from RPM */ + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l11a_1p2: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <35000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <50000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <22000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <52000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + vreg_l17a_2p7: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <300000>; + }; + + vreg_l18a_2p85: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + vreg_l22a_3p0: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <150000>; + }; + + vreg_l23a_2p8: l23 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + regulator-allow-set-load; + regulator-system-load = <5800>; + }; + + vreg_l25a_1p1: l25 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l26a_1p0: l26 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l27a_1p05: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + vreg_l28a_1p0: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <26000>; + }; + + vreg_l29a_2p8: l29 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <80000>; + }; + + vreg_l30a_1p8: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <2500>; + }; + + vreg_l31a_1p2: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <600000>; + }; + + vreg_l32a_1p8: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { }; + + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p0: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + vph_pwr_bbyp: boost-bypass { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&sdhc1 { + status = "okay"; + + /* + * This device is shipped with HS400 capabable eMMCs + * However various brands have been used in various product batches, + * including a Samsung eMMC (BGND3R) which features a quirk with HS400. + * Set the speed to HS200 as a safety measure. + */ + mmc-hs200-1_8v; +}; + +&sdhc2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + grip_default: grip-default { + pins = "gpio39"; + function = "gpio"; + drive-strength = <6>; + bias-pull-down; + }; + + grip_sleep: grip-sleep { + pins = "gpio39"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hall_front_default: hall-front-default { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_back_default: hall-back-default { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts new file mode 100644 index 000000000000..b5e90c85aaf6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z3+/Z4"; + compatible = "sony,ivy-row", "qcom,msm8994"; +}; + +&pm8994_l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +/delete-node/ &pm8994_l19; +/delete-node/ &pm8994_l32; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts new file mode 100644 index 000000000000..a1d1a075941a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z4 Tablet (LTE)"; + compatible = "sony,karin-row", "qcom,msm8994"; +}; + +&blsp2_i2c5 { + /* + * TI LP8557 backlight driver @ 2c + * AD AD7146 touch controller @ 2f + * sii8620 HDMI/MHL bridge @ 72 (kitakami-common) + */ +}; + +&pm8994_l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; +}; + +&pm8994_l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pm8994_l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; +}; + +&pm8994_l25 { + regulator-min-microvolt = <1037500>; + regulator-max-microvolt = <1037500>; +}; + +/delete-node/ &pm8994_l32; +/* Z4 tablets use a different touchscreen. */ +/delete-node/ &touchscreen; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts new file mode 100644 index 000000000000..1385956a69f3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Premium"; + compatible = "sony,satsuki-row", "qcom,msm8994"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts index 5d6bbbf6c119..d3ba9867a369 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> */ /dts-v1/; @@ -11,3 +11,5 @@ model = "Sony Xperia Z5"; compatible = "sony,sumire-row", "qcom,msm8994"; }; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts new file mode 100644 index 000000000000..f129479bbf95 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5 Compact"; + compatible = "sony,suzuran-row", "qcom,msm8994"; +}; + +&pm8994_l14 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; +}; + +/delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 791f254ac3f8..48de66bf19c4 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> */ #include "msm8994.dtsi" @@ -11,8 +11,17 @@ / { /* required for bootloader to select correct board */ - qcom,msm-id = <0xcf 0x20001>; + + /* + * We support MSM8994 v2 (0x20000) and v2.1 (0x20001). + * The V1 chip (0x0 and 0x10000) is significantly different + * and requires driver-side changes (including CPR, be warned!!). + * Besides that, it's very rare. + */ + qcom,msm-id = <207 0x20000>, <207 0x20001>; + /* We only use pm8994+pmi8994. */ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + /* This property is shared across all kitakami devices. */ qcom,board-id = <8 0>; /* Kitakami firmware doesn't support PSCI */ @@ -63,53 +72,29 @@ }; reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - /* This is for getting crash logs using Android downstream kernels */ ramoops@1fe00000 { compatible = "ramoops"; - reg = <0x0 0x1fe00000 0x0 0x200000>; + reg = <0 0x1fe00000 0 0x200000>; console-size = <0x100000>; record-size = <0x10000>; ftrace-size = <0x10000>; pmsg-size = <0x80000>; }; - continuous_splash: framebuffer@3401000{ - reg = <0x0 0x3401000 0x0 0x2200000>; - no-map; - }; - - dfps_data_mem: dfps_data_mem@3400000 { - reg = <0x0 0x3400000 0x0 0x1000>; - no-map; - }; - - peripheral_region: peripheral_region@7400000 { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; - }; - - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; - no-map; - }; - - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + fb_region: fb_region@40000000 { + reg = <0 0x40000000 0 0x1000000>; no-map; }; - fb_region: fb_region@40000000 { - reg = <0x00 0x40000000 0x00 0x1000000>; + tzapp: memory@c7800000 { + reg = <0 0xc7800000 0 0x1900000>; no-map; }; }; }; -&blsp_spi0 { +&blsp1_spi1 { status = "okay"; /* FPC fingerprint reader */ @@ -117,94 +102,330 @@ /* I2C1 is disabled on this board */ -&blsp_i2c2 { +&blsp1_i2c2 { status = "okay"; + clock-frequency = <355000>; - /* NXP NFC */ + /* NXP PN547 NFC */ }; -&blsp_i2c4 { +&blsp1_i2c4 { status = "okay"; + clock-frequency = <355000>; /* Empty but active */ }; -&blsp_i2c5 { +&blsp1_i2c6 { status = "okay"; + clock-frequency = <355000>; - /* SMB1357 charger and sii8620 HDMI/MHL bridge */ -}; + touchscreen: rmi4-i2c-dev@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; -&blsp_i2c6 { - status = "okay"; + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + + vdd-supply = <&pm8994_l22>; + vio-supply = <&pm8994_s4>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; - /* Synaptics touchscreen */ + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; }; &blsp1_uart2 { status = "okay"; }; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8620 HDMI/MHL bridge */ +}; + &blsp2_uart2 { status = "okay"; }; +/* + * Kitakami bootloader only turns cont_splash on when it detects + * specific downstream MDSS/backlight nodes in the active DTB. + * One way to use that framebuffer is to load a secondary instance of + * LK with the downstream DTB appended and then, only from there, load + * mainline Linux. + */ +&cont_splash_mem { + reg = <0 0x3401000 0 0x2200000>; +}; + +&pmi8994_spmi_regulators { + /* + * Yeah, this one *is* managed by RPMPD, but also needs + * to be hacked up as a-o due to the GPU device only accepting a single + * power domain.. which still isn't enough and forces us to bind + * OXILI_CX and OXILI_GX together! + */ + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + &rpm_requests { pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_l1-supply = <&pm8994_s1>; - vdd_l2_26_28-supply = <&pm8994_s3>; - vdd_l3_11-supply = <&pm8994_s3>; - vdd_l4_27_31-supply = <&pm8994_s3>; - vdd_l5_7-supply = <&pm8994_s3>; - vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; - vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; - vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l6: l6 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pmi8994_s1>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; + vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l17_l29-supply = <&pmi8994_bby>; + vdd_l20_l21-supply = <&pmi8994_bby>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_lvs2-supply = <&pm8994_s4>; + + /* S1, S2, S6 and S12 are managed by RPMPD */ + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + /* + * S8 - SPMI-managed VDD_APC0 + * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1 + */ + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L5 is inaccessible from RPM */ + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* L7 is inaccessible from RPM */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + regulator-system-load = <10000>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; pm8994_lvs1: lvs1 {}; pm8994_lvs2: lvs2 {}; @@ -213,22 +434,34 @@ pmi8994_regulators: pmi8994-regulators { compatible = "qcom,rpm-pmi8994-regulators"; - pmi8994_s1: s1 {}; - pmi8994_s2: s2 {}; - pmi8994_s3: s3 {}; - pmi8994_bby: boost-bypass {}; + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; }; }; &sdhc1 { - /* There is an issue with the eMMC causing permanent + /* + * There is an issue with the eMMC causing permanent * damage to the card if a quirk isn't addressed. * Until it's fixed, disable the MMC so as not to brick * devices. */ status = "disabled"; - /* Downstream pushes 2.95V to the sdhci device, + /* + * Downstream pushes 2.95V to the sdhci device, * but upstream driver REALLY wants to make vmmc 1.8v * cause of the hs400-1_8v mode. MMC works fine without * that regulator, so let's not use it for now. @@ -238,3 +471,27 @@ * vqmmc-supply = <&pm8994_s4>; */ }; + +&sdhc2 { + status = "okay"; + + cd-gpios = <&tlmm 100 0>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; +}; + +&tlmm { + ts_int_active: ts-int-active { + pins = "gpio42"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + ts_reset_active: ts-reset-active { + pins = "gpio109"; + drive-strength = <2>; + bias-disable; + output-low; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 6e083a2f690b..f49d442d2edf 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8994.h> +#include <dt-bindings/power/qcom-rpmpd.h> / { interrupt-parent = <&intc>; @@ -131,11 +132,11 @@ cpu = <&CPU5>; }; - core2 { + cpu6_map: core2 { cpu = <&CPU6>; }; - core3 { + cpu7_map: core3 { cpu = <&CPU7>; }; }; @@ -154,6 +155,12 @@ reg = <0 0 0 0>; }; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; @@ -169,8 +176,51 @@ #size-cells = <2>; ranges; + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0 0x03400000 0 0x1000>; + no-map; + }; + + cont_splash_mem: memory@3800000 { + reg = <0 0x03800000 0 0x2400000>; + no-map; + }; + smem_mem: smem_region@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; + reg = <0 0x06a00000 0 0x200000>; + no-map; + }; + + mpss_mem: memory@7000000 { + reg = <0 0x07000000 0 0x5a00000>; + no-map; + }; + + peripheral_region: memory@ca00000 { + reg = <0 0x0ca00000 0 0x1f00000>; + no-map; + }; + + rmtfs_mem: memory@c6400000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xc6400000 0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + mba_mem: memory@c6700000 { + reg = <0 0xc6700000 0 0x100000>; + no-map; + }; + + audio_mem: memory@c7000000 { + reg = <0 0xc7000000 0 0x800000>; + no-map; + }; + + adsp_mem: memory@c9400000 { + reg = <0 0xc9400000 0 0x3f00000>; no-map; }; }; @@ -192,6 +242,35 @@ compatible = "qcom,rpmcc-msm8994"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8994-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; }; }; }; @@ -203,6 +282,55 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; @@ -385,7 +513,7 @@ status = "disabled"; }; - blsp_i2c1: i2c@f9923000 { + blsp1_i2c1: i2c@f9923000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -393,6 +521,8 @@ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; clock-frequency = <400000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -401,7 +531,7 @@ status = "disabled"; }; - blsp_spi0: spi@f9923000 { + blsp1_spi1: spi@f9923000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -412,21 +542,21 @@ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_spi0_default>; - pinctrl-1 = <&blsp1_spi0_sleep>; + pinctrl-0 = <&blsp1_spi1_default>; + pinctrl-1 = <&blsp1_spi1_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; - blsp_i2c2: i2c@f9924000 { + blsp1_i2c2: i2c@f9924000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -439,14 +569,16 @@ /* I2C3 doesn't exist */ - blsp_i2c4: i2c@f9926000 { + blsp1_i2c4: i2c@f9926000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9926000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; + dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -455,31 +587,32 @@ status = "disabled"; }; - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - num-channels = <18>; - qcom,num-ees = <4>; + blsp1_i2c5: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - /* According to downstream kernels, i2c6 - * comes before i2c5 address-wise... - */ - - blsp_i2c6: i2c@f9928000 { + blsp1_i2c6: i2c@f9928000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9928000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; - clock-frequency = <355000>; + clock-frequency = <400000>; dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; @@ -490,10 +623,23 @@ status = "disabled"; }; + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; @@ -505,7 +651,43 @@ status = "disabled"; }; - blsp_i2c5: i2c@f9967000 { + blsp2_i2c1: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi4: spi@f9966000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9966000 0x500>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + spi-max-frequency = <19200000>; + dmas = <&blsp2_dma 18>, <&blsp2_dma 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi10_default>; + pinctrl-1 = <&blsp2_spi10_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c5: i2c@f9967000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9967000 0x500>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -516,8 +698,8 @@ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_default>; - pinctrl-1 = <&i2c5_sleep>; + pinctrl-0 = <&i2c11_default>; + pinctrl-1 = <&i2c11_sleep>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -588,16 +770,18 @@ blsp2_uart2_default: blsp2-uart2-default { function = "blsp_uart8"; - pins = "gpio45", "gpio46"; - drive-strength = <2>; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + drive-strength = <16>; bias-disable; }; blsp2_uart2_sleep: blsp2-uart2-sleep { function = "gpio"; - pins = "gpio45", "gpio46"; + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; i2c1_default: i2c1-default { @@ -671,7 +855,56 @@ bias-disable; }; - blsp1_spi0_default: blsp1-spi0-default { + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio44", "gpio43"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_spi10_default: blsp2-spi10-default { + default { + function = "blsp_spi10"; + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio55"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp2_spi10_sleep: blsp2-spi10-sleep { + pins = "gpio53", "gpio54", "gpio55"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_default: i2c11-default { + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c11_sleep: i2c11-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi1_default: blsp1-spi1-default { default { function = "blsp_spi1"; pins = "gpio0", "gpio1", "gpio3"; @@ -686,7 +919,7 @@ }; }; - blsp1_spi0_sleep: blsp1-spi0-sleep { + blsp1_spi1_sleep: blsp1-spi1-sleep { pins = "gpio0", "gpio1", "gpio3"; drive-strength = <2>; bias-disable; @@ -776,13 +1009,7 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; - - timer { + timer: timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 0xff08>, <GIC_PPI 3 0xff08>, @@ -790,9 +1017,9 @@ <GIC_PPI 1 0xff08>; }; - vreg_vph_pwr: vreg-vph-pwr { + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; + regulator-name = "vph_pwr"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 7eef07e73e25..ce430ba9c118 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -750,6 +750,8 @@ ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + device_type = "pci"; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -802,6 +804,8 @@ ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + device_type = "pci"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 00d84fb21798..b500f24d47bc 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -74,6 +74,14 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -295,6 +303,14 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&ufshc { + status = "okay"; +}; + +&ufsphy { + status = "okay"; +}; + &usb3 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index cec42437b302..c1ef0c71d5f5 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -106,6 +106,14 @@ // status = "okay"; }; +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -345,6 +353,7 @@ }; &ufshc { + status = "okay"; vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; @@ -354,6 +363,7 @@ }; &ufsphy { + status = "okay"; vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi deleted file mode 100644 index 7c222cbf19d9..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ /dev/null @@ -1,108 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ - -&tlmm { - sdc2_clk_on: sdc2_clk_on { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <16>; /* 16 mA */ - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; - bias-disable; /* NO pull */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cmd_on: sdc2_cmd_on { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 mA */ - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_data_on: sdc2_data_on { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <10>; /* 10 mA */ - }; - }; - - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 mA */ - }; - }; - - blsp1_uart3_on: blsp1_uart3_on { - tx { - pins = "gpio45"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio46"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - cts { - pins = "gpio47"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - - rfr { - pins = "gpio48"; - function = "blsp_uart3_a"; - drive-strength = <2>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index ebdaaf1dfca4..1f2e93aa6553 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -133,6 +133,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -152,6 +153,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { @@ -167,6 +169,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x2>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { @@ -182,6 +185,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x3>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { @@ -197,6 +201,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { @@ -216,6 +221,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { @@ -231,6 +237,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { @@ -246,6 +253,7 @@ compatible = "qcom,kryo280"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1536>; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { @@ -379,43 +387,43 @@ compatible = "operating-points-v2"; rpmpd_opp_ret: opp1 { - opp-level = <16>; + opp-level = <RPM_SMD_LEVEL_RETENTION>; }; rpmpd_opp_ret_plus: opp2 { - opp-level = <32>; + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; }; rpmpd_opp_min_svs: opp3 { - opp-level = <48>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; }; rpmpd_opp_low_svs: opp4 { - opp-level = <64>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; }; rpmpd_opp_svs: opp5 { - opp-level = <128>; + opp-level = <RPM_SMD_LEVEL_SVS>; }; rpmpd_opp_svs_plus: opp6 { - opp-level = <192>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; }; rpmpd_opp_nom: opp7 { - opp-level = <256>; + opp-level = <RPM_SMD_LEVEL_NOM>; }; rpmpd_opp_nom_plus: opp8 { - opp-level = <320>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; }; rpmpd_opp_turbo: opp9 { - opp-level = <384>; + opp-level = <RPM_SMD_LEVEL_TURBO>; }; rpmpd_opp_turbo_plus: opp10 { - opp-level = <512>; + opp-level = <RPM_SMD_LEVEL_BINNING>; }; }; }; @@ -937,6 +945,7 @@ num-lanes = <1>; phys = <&pciephy>; phy-names = "pciephy"; + status = "disabled"; ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; @@ -962,11 +971,12 @@ perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; - phy@1c06000 { + pcie_phy: phy@1c06000 { compatible = "qcom,msm8998-qmp-pcie-phy"; reg = <0x01c06000 0x18c>; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; ranges; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, @@ -999,6 +1009,7 @@ phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>; + status = "disabled"; #reset-cells = <1>; clock-names = @@ -1038,6 +1049,7 @@ reg = <0x01da7000 0x18c>; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; ranges; clock-names = @@ -1073,6 +1085,278 @@ #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x2>; + + sdc2_clk_on: sdc2_clk_on { + config { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + + sdc2_clk_off: sdc2_clk_off { + config { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + + sdc2_cmd_on: sdc2_cmd_on { + config { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_cmd_off: sdc2_cmd_off { + config { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_data_on: sdc2_data_on { + config { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_data_off: sdc2_data_off { + config { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio95"; + function = "gpio"; + }; + + config { + pins = "gpio95"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp1_uart3_on: blsp1_uart3_on { + tx { + pins = "gpio45"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + cts { + pins = "gpio47"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rfr { + pins = "gpio48"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio32", "gpio33"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c5_default: blsp1-i2c5-default { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_sleep: blsp1-i2c5-sleep { + pins = "gpio87", "gpio88"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio43", "gpio44"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + blsp2_i2c1_default: blsp2-i2c1-default { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep { + pins = "gpio55", "gpio56"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c3_default: blsp2-i2c3-default { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c4_default: blsp2-i2c4-default { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c4_sleep: blsp2-i2c4-sleep { + pins = "gpio67", "gpio68"; + function = "blsp_i2c10"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio60", "gpio61"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_i2c6_default: blsp2-i2c6-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; }; remoteproc_mss: remoteproc@4080000 { @@ -1789,6 +2073,11 @@ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1804,6 +2093,11 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1819,6 +2113,11 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1834,6 +2133,11 @@ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1849,6 +2153,11 @@ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c5_default>; + pinctrl-1 = <&blsp1_i2c5_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1864,6 +2173,11 @@ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1871,6 +2185,19 @@ #size-cells = <0>; }; + blsp2_dma: dma@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x25000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp2_uart1: serial@c1b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x0c1b0000 0x1000>; @@ -1881,7 +2208,7 @@ status = "disabled"; }; - blsp2_i2c0: i2c@c1b5000 { + blsp2_i2c1: i2c@c1b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b5000 0x600>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; @@ -1889,6 +2216,11 @@ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1896,7 +2228,7 @@ #size-cells = <0>; }; - blsp2_i2c1: i2c@c1b6000 { + blsp2_i2c2: i2c@c1b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b6000 0x600>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; @@ -1904,6 +2236,11 @@ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1911,7 +2248,7 @@ #size-cells = <0>; }; - blsp2_i2c2: i2c@c1b7000 { + blsp2_i2c3: i2c@c1b7000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b7000 0x600>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; @@ -1919,6 +2256,11 @@ clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1926,7 +2268,7 @@ #size-cells = <0>; }; - blsp2_i2c3: i2c@c1b8000 { + blsp2_i2c4: i2c@c1b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b8000 0x600>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; @@ -1934,6 +2276,11 @@ clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c4_default>; + pinctrl-1 = <&blsp2_i2c4_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1941,7 +2288,7 @@ #size-cells = <0>; }; - blsp2_i2c4: i2c@c1b9000 { + blsp2_i2c5: i2c@c1b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b9000 0x600>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; @@ -1949,6 +2296,11 @@ clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -1956,7 +2308,7 @@ #size-cells = <0>; }; - blsp2_i2c5: i2c@c1ba000 { + blsp2_i2c6: i2c@c1ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1ba000 0x600>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1964,6 +2316,11 @@ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; clock-frequency = <400000>; status = "disabled"; @@ -2110,5 +2467,3 @@ }; }; }; - -#include "msm8998-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index a53eccf2b695..bdc76d504b78 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm8150 { + pm8150-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -97,6 +97,16 @@ }; }; + pm8150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index e112e8876db6..b21e56a46145 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { - pm8150b { + pm8150b-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -95,6 +95,16 @@ }; }; + pm8150b_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150b_gpios: gpio@c000 { compatible = "qcom,pm8150b-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 62139538b7d9..52f094a2b713 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -10,7 +10,7 @@ / { thermal-zones { - pm8150l { + pm8150l-thermal { polling-delay-passive = <100>; polling-delay = <0>; @@ -89,6 +89,16 @@ }; }; + pm8150l_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pm8150l_gpios: gpio@c000 { compatible = "qcom,pm8150l-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 5ffdf37d8e31..c3876c82c874 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -6,7 +6,7 @@ / { thermal-zones { - pm8994 { + pm8994-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -43,7 +43,7 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pon@800 { + pm8994_pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x800>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 67283d60e2ac..6f5bb6b37ec2 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -9,7 +9,7 @@ / { thermal-zones { - pm8998 { + pm8998-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d016b12967eb..d230c510d4b7 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -30,11 +30,15 @@ compatible = "qcom,pmi8998-lab-ibb"; ibb: ibb { - interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>; + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sc-err", "ocp"; }; lab: lab { - interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>; + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index ff4005186895..172be177fc8f 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -8,7 +8,7 @@ / { thermal-zones { - pms405 { + pms405-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index ce22d4fa383e..26a4a5a6871e 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -7,6 +7,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -40,6 +42,17 @@ regulator-always-on; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -66,6 +79,98 @@ }; + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + thermal-zones { + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pm8150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + wifi-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <52000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <50000>; + hysteresis = <4000>; + type = "passive"; + }; + }; + }; + }; + vbat: vbat-regulator { compatible = "regulator-fixed"; regulator-name = "VBAT"; @@ -87,7 +192,7 @@ vdc_3v3: vdc-3v3-regulator { compatible = "regulator-fixed"; regulator-name = "VDC_3V3"; - vin-supply = <&dc12v>; + vin-supply = <&vreg_l11c_3p3>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -120,6 +225,11 @@ }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + &apps_rsc { pm8009-rpmh-regulators { compatible = "qcom,pm8009-rpmh-regulators"; @@ -406,6 +516,42 @@ }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + /* LS-I2C0 */ &i2c4 { status = "okay"; @@ -413,6 +559,55 @@ &i2c5 { status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + +#if 0 + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; +#endif + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + }; + }; }; /* LS-I2C1 */ @@ -420,6 +615,88 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pm8150_adc { + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + wifi-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wifi-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_default_state>; +}; + +&pcie2_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + &pm8150_gpios { gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; gpio-line-names = @@ -435,6 +712,25 @@ "GPIO_10_P"; /* Green LED */ }; +&pm8150b_adc { + conn-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm8150b_gpios { gpio-line-names = "NC", @@ -451,6 +747,38 @@ "NC"; }; +&pm8150l_adc { + skin-msm-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pm8150l-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + skin-msm-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8150l-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm8150l_gpios { gpio-line-names = "NC", @@ -465,6 +793,15 @@ "PM_GPIO-B", "NC", "PM3003A_MODE"; + + lt9611_rst_pin: lt9611-rst-pin { + pins = "gpio5"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; }; &pm8150_rtc { @@ -483,6 +820,35 @@ status = "okay"; }; +&q6afedai { + qi2s@16 { + reg = <16>; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + qi2s@20 { + reg = <20>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + &sdhc_2 { status = "okay"; pinctrl-names = "default"; @@ -491,12 +857,91 @@ vqmmc-supply = <&vreg_l6c_2p96>; cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; bus-width = <4>; - /* there seem to be issues with HS400-1.8V mode, so disable it */ - no-1-8-v; no-sdio; no-emmc; }; +&sound { + compatible = "qcom,qrb5165-rb5-sndcard"; + pinctrl-0 = <&tert_mi2s_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + dma-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + /* CAN */ &spi0 { status = "okay"; @@ -512,6 +957,26 @@ }; }; +&swr0 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; +}; + &tlmm { gpio-reserved-ranges = <40 4>; gpio-line-names = @@ -696,6 +1161,87 @@ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + lt9611_irq_pin: lt9611-irq { + pins = "gpio63"; + function = "gpio"; + bias-disable; + }; + + pcie0_default_state: pcie0-default { + clkreq { + pins = "gpio80"; + function = "pci_e0"; + bias-pull-up; + }; + + reset-n { + pins = "gpio79"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio81"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + clkreq { + pins = "gpio83"; + function = "pci_e1"; + bias-pull-up; + }; + + reset-n { + pins = "gpio82"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio84"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_default_state: pcie2-default { + clkreq { + pins = "gpio86"; + function = "pci_e2"; + bias-pull-up; + }; + + reset-n { + pins = "gpio85"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + sdc2_default_state: sdc2-default { clk { pins = "sdc2_clk"; @@ -706,13 +1252,13 @@ cmd { pins = "sdc2_cmd"; bias-pull-up; - drive-strength = <16>; + drive-strength = <10>; }; data { pins = "sdc2_data"; bias-pull-up; - drive-strength = <16>; + drive-strength = <10>; }; }; @@ -792,3 +1338,10 @@ vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; }; + +&vamacro { + pinctrl-0 = <&dmic01_active>; + pinctrl-names = "default"; + vdd-micb-supply = <&vreg_s4a_1p8>; + qcom,dmic-sample-rate = <600000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 8ed7dd39f6e3..07c8b2c926c0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -298,40 +298,6 @@ regulator-max-microvolt = <1128000>; }; - /* - * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just - * inputs to other rails on AOP-managed PMICs on trogdor. - * The system is already configured to manage these rails - * automatically (enable when needed, adjust voltage for - * headroom) so we won't specify anything here. - * - * NOTE: though the rails have a voltage implied by their - * name, the automatic headroom calculation might not result - * in them being that voltage. ...and that's OK. - * Specifically the only point of these rails is to provide - * an input source for other rails and if we can satisify the - * needs of those other rails with a lower source voltage then - * we save power. - */ - - pp1200_l1a: ldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l2a: ldo2 { - regulator-min-microvolt = <944000>; - regulator-max-microvolt = <1056000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1000_l3a: ldo3 { - regulator-min-microvolt = <968000>; - regulator-max-microvolt = <1064000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdd_qlink_lv: vdd_qlink_lv_ck: vdd_qusb_hs0_core: @@ -350,24 +316,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp2700_l5a: ldo5 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ebi0_cal: - ebi1_cal: - vddio_ck_ebi0: - vddio_ck_ebi1: - vddio_ebi0: - vddq: - pp600_l6a: ldo6 { - regulator-min-microvolt = <568000>; - regulator-max-microvolt = <648000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdd_cx_wlan: pp800_l9a: ldo9 { regulator-min-microvolt = <488000>; @@ -404,6 +352,11 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + /* + * On trogdor this needs to match l10a since we use it to + * give power to things like SPI flash which communicate back + * on lines powered by l10a. Thus we force to 1.8V. + */ pp1800_l13a: ldo13 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -424,12 +377,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp2700_l16a: ldo16 { - regulator-min-microvolt = <2496000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vdda_qusb_hs0_3p1: vdd_pdphy: pp3100_l17a: ldo17 { @@ -463,8 +410,8 @@ }; pp1800_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -491,25 +438,10 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ld_pp1800_esim_l4c: - vddpx_5: - pp1800_l4c: ldo4 { - regulator-min-microvolt = <1648000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vddpx_6: - pp1800_l5c: ldo5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vddpx_2: ppvar_l6c: ldo6 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3304000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -936,6 +868,13 @@ ap_spi_fp: &spi10 { /* PINCTRL - additions to nodes defined in sc7180.dtsi */ +&dp_hot_plug_det { + pinconf { + pins = "gpio117"; + bias-disable; + }; +}; + &qspi_cs0 { pinconf { pins = "gpio68"; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 003309f0d3e1..1ea3344ab62c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -682,6 +682,11 @@ reg = <0x25b 0x1>; bits = <1 3>; }; + + gpu_speed_bin: gpu_speed_bin@1d2 { + reg = <0x1d2 0x2>; + bits = <5 8>; + }; }; sdhc_1: sdhci@7c4000 { @@ -1466,12 +1471,6 @@ pins = "gpio117"; function = "dp_hot"; }; - - pinconf { - pins = "gpio117"; - bias-disable; - input-enable; - }; }; qspi_clk: qspi-clk { @@ -2058,52 +2057,69 @@ #cooling-cells = <2>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; gpu_opp_table: opp-table { compatible = "operating-points-v2"; + opp-825000000 { + opp-hz = /bits/ 64 <825000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x04>; + }; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; opp-peak-kBps = <8532000>; + opp-supported-hw = <0x07>; }; opp-650000000 { opp-hz = /bits/ 64 <650000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; opp-peak-kBps = <7216000>; + opp-supported-hw = <0x07>; }; opp-565000000 { opp-hz = /bits/ 64 <565000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; }; opp-430000000 { opp-hz = /bits/ 64 <430000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <5412000>; + opp-supported-hw = <0x07>; }; opp-355000000 { opp-hz = /bits/ 64 <355000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; }; opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <3072000>; + opp-supported-hw = <0x07>; }; opp-180000000 { opp-hz = /bits/ 64 <180000000>; opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; opp-peak-kBps = <1804000>; + opp-supported-hw = <0x07>; }; }; }; @@ -3353,6 +3369,7 @@ compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; timer@17c20000{ @@ -3594,7 +3611,7 @@ }; thermal-zones { - cpu0-thermal { + cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3643,7 +3660,7 @@ }; }; - cpu1-thermal { + cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3692,7 +3709,7 @@ }; }; - cpu2-thermal { + cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3741,7 +3758,7 @@ }; }; - cpu3-thermal { + cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3790,7 +3807,7 @@ }; }; - cpu4-thermal { + cpu4_thermal: cpu4-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3839,7 +3856,7 @@ }; }; - cpu5-thermal { + cpu5_thermal: cpu5-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3888,7 +3905,7 @@ }; }; - cpu6-thermal { + cpu6_thermal: cpu6-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3929,7 +3946,7 @@ }; }; - cpu7-thermal { + cpu7_thermal: cpu7-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -3970,7 +3987,7 @@ }; }; - cpu8-thermal { + cpu8_thermal: cpu8-thermal { polling-delay-passive = <250>; polling-delay = <0>; @@ -4011,7 +4028,7 @@ }; }; - cpu9-thermal { + cpu9_thermal: cpu9-thermal { polling-delay-passive = <250>; polling-delay = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 37d5cc32f6b6..f91a928466c3 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -808,17 +808,19 @@ sdhc_1: sdhci@c0c4000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c0c4000 0x1000>, - <0x0c0c5000 0x1000>; - reg-names = "hc", "cqhci"; + <0x0c0c5000 0x1000>, + <0x0c0c8000 0x8000>; + reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "core", "iface", "xo", "ice"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c0b93813ea9a..c4ac6f5dc008 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1114,11 +1114,11 @@ reg = <0x10>; // CAM0_RST_N - reset-gpios = <&tlmm 9 0>; + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; gpios = <&tlmm 13 0>, - <&tlmm 9 0>; + <&tlmm 9 GPIO_ACTIVE_LOW>; clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; clock-names = "xvclk"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi new file mode 100644 index 000000000000..8f617f7b6d34 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + aliases { + hsuart0 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; + + vol-down { + label = "Volume down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + + vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: memory@f5b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf5b01000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* + * It seems like reserving the old rmtfs_mem region is also needed to prevent + * random crashes which are most likely modem related, more testing needed. + */ + removed_region: memory@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x200000>; + }; + + ramoops: ramoops@ac300000 { + compatible = "ramoops"; + reg = <0 0xac300000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + devinfo-size = <0x1000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 88 0>; + enable-active-high; + regulator-boot-on; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_qlink_lv: + vdda_ufs1_core: + vdda_usb1_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_1p8: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + #address-cells = <1>; + #size-cells = <0>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + }; +}; + +&i2c12 { + status = "okay"; + clock-frequency = <400000>; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_default_pins>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4_f12: rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <144>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <200>; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +/* Modem/wifi*/ +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; +}; + +&pm8998_gpio { + volume_down_gpio: pm8998_gpio5 { + pinconf { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; + + volume_up_gpio: pm8998_gpio6 { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qup_i2c12_default { + mux { + pins = "gpio49", "gpio50"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* + * Prevent garbage data on bluetooth UART lines + */ +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "oneplus6/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* + * disable USB3 clock requirement as the device only supports + * USB2. + */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * We don't have the capability to switch modes yet. + */ + dr_mode = "peripheral"; + + /* fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy as it's unused on this device. */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + tri_state_key_default: tri_state_key_default { + mux { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int { + mux { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + panel_reset_pins: panel-reset { + mux { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable = <0>; + }; + }; + + panel_te_pin: panel-te { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + + panel_esd_pin: panel-esd { + mux { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts new file mode 100644 index 000000000000..72842c887617 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6 (enchilada) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6"; + compatible = "oneplus,enchilada", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,sofef00"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts new file mode 100644 index 000000000000..969b36dc9e2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6T (fajita) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6T"; + compatible = "oneplus,fajita", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,s6e3fc2x01"; +}; + +&rmi4_f12 { + touchscreen-y-mm = <148>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 04b2490eec9f..454f794af547 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4571,6 +4571,7 @@ compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; reg = <0 0x17980000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; apss_shared: mailbox@17990000 { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 8b40f96e9780..140db2d5ba31 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -13,7 +13,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> -#include "sdm845.dtsi" +#include "sdm850.dtsi" #include "pm8998.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi new file mode 100644 index 000000000000..b1c2cf566c7a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM850 SoC device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845.dtsi" + +&cpu4_opp_table { + cpu4_opp33: opp-2841600000 { + opp-hz = /bits/ 64 <2841600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp34: opp-2956800000 { + opp-hz = /bits/ 64 <2956800000>; + opp-peak-kBps = <7216000 25497600>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 5270bda7418f..e5bb17bc2f46 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -47,8 +47,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -64,8 +68,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -79,8 +87,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -93,8 +105,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <232>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -107,8 +123,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -121,8 +141,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -135,8 +159,12 @@ compatible = "qcom,kryo485"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <369>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -149,14 +177,90 @@ compatible = "qcom,kryo485"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <421>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; firmware { @@ -186,6 +290,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved-memory { @@ -1818,6 +1975,7 @@ compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index dea00f19711d..5b4c5b08434c 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -24,6 +24,106 @@ stdout-path = "serial0:115200n8"; }; + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + mmw-pa2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-msm-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150l_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm8150_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -186,6 +286,13 @@ regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; }; pm8150l-rpmh-regulators { @@ -358,6 +465,13 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/a650_zap.mbn"; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <1000000>; @@ -378,6 +492,115 @@ /* rtc6226 @ 64 */ }; +&pm8150_adc { + xo-therm@4c { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm1@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-therm@1 { + reg = <1>; + io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm1@2 { + reg = <2>; + io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150b_adc { + conn-therm@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm8150b_adc_tm { + status = "okay"; + + conn-therm@0 { + reg = <0>; + io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc_tm { + status = "okay"; + + camera-flash-therm@0 { + reg = <0>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + skin-msm-therm@1 { + reg = <1>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pa-therm2@2 { + reg = <2>; + io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8150l_adc { + camera-flash-therm@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + skin-msm-therm@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + pa-therm2@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + &pm8150_rtc { status = "okay"; }; @@ -426,3 +649,49 @@ vdda-pll-supply = <&vreg_l9a_1p2>; vdda-pll-max-microamp = <19000>; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 65acd1f381eb..947e1accae3a 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -4,14 +4,18 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dispcc-sm8250.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> +#include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> / { @@ -89,6 +93,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -106,6 +112,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -120,6 +128,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -134,6 +144,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <448>; + dynamic-power-coefficient = <205>; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -148,6 +160,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; @@ -162,6 +176,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; @@ -177,6 +193,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <379>; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; @@ -191,6 +209,8 @@ compatible = "qcom,kryo485"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <444>; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; #cooling-cells = <2>; @@ -199,6 +219,42 @@ next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; }; firmware { @@ -214,6 +270,13 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + mmcx_reg: mmcx-reg { + compatible = "regulator-fixed-domain"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + regulator-name = "MMCX"; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -321,7 +384,7 @@ }; }; - smem: qcom,smem { + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; @@ -1168,6 +1231,299 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIFI_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_WIGIG_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + pcie2: pci@1c10000 { + compatible = "qcom,pcie-sm8250", "snps,dw-pcie"; + reg = <0 0x01c10000 0 0x3000>, + <0 0x64000000 0 0xf1d>, + <0 0x64000f20 0 0xa8>, + <0 0x64001000 0 0x1000>, + <0 0x64100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1d00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, + <0x100 &apps_smmu 0x1d01 0x1>; + + resets = <&gcc GCC_PCIE_2_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_2_GDSC>; + + phys = <&pcie2_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie2_phy: phy@1c16000 { + compatible = "qcom,sm8250-qmp-modem-pcie-phy"; + reg = <0 0x1c16000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MDM_CLKREF_EN>, + <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie2_lane: lanes@1c0e200 { + reg = <0 0x1c16200 0 0x170>, /* tx0 */ + <0 0x1c16400 0 0x200>, /* rx0 */ + <0 0x1c16a00 0 0x1f0>, /* pcs */ + <0 0x1c16600 0 0x170>, /* tx1 */ + <0 0x1c16800 0 0x200>, /* rx1 */ + <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_2_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1253,15 +1609,169 @@ #hwlock-cells = <1>; }; + wsamacro: codec@3240000 { + compatible = "qcom,sm8250-lpass-wsa-macro"; + reg = <0 0x03240000 0 0x1000>; + clocks = <&audiocc 1>, + <&audiocc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&aoncc 0>, + <&vamacro>; + + clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + }; + + swr0: soundwire-controller@3250000 { + reg = <0 0x03250000 0 0x2000>; + compatible = "qcom,soundwire-v1.5.1"; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wsamacro>; + clock-names = "iface"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + }; + + audiocc: clock-controller@3300000 { + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0 0x03300000 0 0x30000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + vamacro: codec@3370000 { + compatible = "qcom,sm8250-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + clocks = <&aoncc 0>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + clock-names = "mclk", "macro", "dcodec"; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + aoncc: clock-controller@3380000 { + compatible = "qcom,sm8250-lpass-aoncc"; + reg = <0 0x03380000 0 0x40000>; + #clock-cells = <1>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio", "bus"; + }; + + lpass_tlmm: pinctrl@33c0000{ + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 14>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + wsa_swr_active: wsa-swr-active-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + + }; + }; + + wsa_swr_sleep: wsa-swr-sleep-pins { + clk { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + input-enable; + bias-pull-down; + }; + + data { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + input-enable; + bias-pull-down; + + }; + }; + + dmic01_active: dmic01-active-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic01_sleep: dmic01-sleep-pins { + clk { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + data { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <2>; + pull-down; + input-enable; + }; + }; + }; + gpu: gpu@3d00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ compatible = "qcom,adreno-650.2", - "qcom,adreno", - "amd,imageon"; + "qcom,adreno"; #stream-id-cells = <16>; reg = <0 0x03d00000 0 0x40000>; @@ -1557,6 +2067,9 @@ }; }; + sound: sound { + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8250-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -1657,7 +2170,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; @@ -1758,6 +2271,12 @@ }; }; + system-cache-controller@9200000 { + compatible = "qcom,sm8250-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + usb_2: usb@a8f8800 { compatible = "qcom,sm8250-dwc3", "qcom,dwc3"; reg = <0 0x0a8f8800 0 0x400>; @@ -1803,6 +2322,299 @@ }; }; + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>, + <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "notused", "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <460000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <460000000>, + <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-7nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8250-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + mmcx-supply = <&mmcx_reg>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux", + "dptx1_phy_pll_link_clk", + "dptx1_phy_pll_vco_div_clk", + "dptx2_phy_pll_link_clk", + "dptx2_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1880,6 +2692,37 @@ gpio-ranges = <&tlmm 0 0 180>; wakeup-parent = <&pdc>; + pri_mi2s_active: pri-mi2s-active { + sclk { + pins = "gpio138"; + function = "mi2s0_sck"; + drive-strength = <8>; + bias-disable; + }; + + ws { + pins = "gpio141"; + function = "mi2s0_ws"; + drive-strength = <8>; + output-high; + }; + + data0 { + pins = "gpio139"; + function = "mi2s0_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + data1 { + pins = "gpio140"; + function = "mi2s0_data1"; + drive-strength = <8>; + output-high; + }; + }; + qup_i2c0_default: qup-i2c0-default { mux { pins = "gpio28", "gpio29"; @@ -2476,6 +3319,30 @@ function = "qup18"; }; }; + + tert_mi2s_active: tert-mi2s-active { + sck { + pins = "gpio133"; + function = "mi2s2_sck"; + drive-strength = <8>; + bias-disable; + }; + + data0 { + pins = "gpio134"; + function = "mi2s2_data0"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + ws { + pins = "gpio135"; + function = "mi2s2_ws"; + drive-strength = <8>; + output-high; + }; + }; }; apps_smmu: iommu@15000000 { @@ -2620,6 +3487,60 @@ label = "lpass"; qcom,remote-pid = <2>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + apr-service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: cc { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -2661,6 +3582,7 @@ compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts new file mode 100644 index 000000000000..8923657579fb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8350.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sm8350 MTP"; + compatible = "qcom,sm8350-mtp", "qcom,sm8350"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&vreg_s11b_0p95>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>; + vdd-l8-supply = <&vreg_s2c_0p8>; + + vreg_s10b_1p8: smps10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s11b_0p95: smps11 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s12b_1p25: smps12 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + }; + + vreg_l1b_0p88: ldo1 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p07: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p9: ldo3 { + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p96: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_s1c_1p86>; + vdd-l2-l8-supply = <&vreg_s1c_1p86>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s12b_1p25>; + + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_1p86: smps1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_s2c_0p8: smps2 { + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s10c_1p05: smps10 { + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_uim1: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_uim2: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_1p2: ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p96: ldo11 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi new file mode 100644 index 000000000000..5ef460458f5c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -0,0 +1,499 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Linaro Limaited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo685"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + no-map; + reg = <0x0 0x80700000 0x0 0x160000>; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80880000 0x0 0x14000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + cpucp_fw_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0x4600000>; + no-map; + }; + + pil_camera_mem: mmeory@85200000 { + reg = <0x0 0x85200000 0x0 0x500000>; + no-map; + }; + + pil_video_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x500000>; + no-map; + }; + + pil_cvp_mem: memory@85c00000 { + reg = <0x0 0x85c00000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: memory@86100000 { + reg = <0x0 0x86100000 0x0 0x2100000>; + no-map; + }; + + pil_slpi_mem: memory@88200000 { + reg = <0x0 0x88200000 0x0 0x1500000>; + no-map; + }; + + pil_cdsp_mem: memory@89700000 { + reg = <0x0 0x89700000 0x0 0x1e00000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b500000 { + reg = <0x0 0x8b500000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b510000 { + reg = <0x0 0x8b510000 0x0 0xa000>; + no-map; + }; + + pil_gpu_mem: memory@8b51a000 { + reg = <0x0 0x8b51a000 0x0 0x2000>; + no-map; + }; + + pil_spss_mem: memory@8b600000 { + reg = <0x0 0x8b600000 0x0 0x100000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0x10000000>; + no-map; + }; + + hyp_reserved_mem: memory@d0000000 { + reg = <0x0 0xd0000000 0x0 0x800000>; + no-map; + }; + + pil_trustedvm_mem: memory@d0800000 { + reg = <0x0 0xd0800000 0x0 0x76f7000>; + no-map; + }; + + qrtr_shbuf: memory@d7ef7000 { + reg = <0x0 0xd7ef7000 0x0 0x9000>; + no-map; + }; + + chan0_shbuf: memory@d7f00000 { + reg = <0x0 0xd7f00000 0x0 0x80000>; + no-map; + }; + + chan1_shbuf: memory@d7f80000 { + reg = <0x0 0xd7f80000 0x0 0x80000>; + no-map; + }; + + removed_mem: memory@d8800000 { + reg = <0x0 0xd8800000 0x0 0x6800000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8350"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm8350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc 121>, + <&gcc 122>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc 83>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default_state>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>, + <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>, + <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sm8350-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 203>; + + qup_uart3_default_state: qup-uart3-default-state { + rx { + pins = "gpio18"; + function = "qup3"; + }; + tx { + pins = "gpio19"; + function = "qup3"; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 3b8b03705917..f2de2fa0c8b8 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-beacon-rzg2n-kit.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb @@ -21,6 +22,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-beacon-rzg2h-kit.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index e66b5b36e489..30c169b08536 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -5,23 +5,24 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clk/versaclock.h> / { backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; power-supply = <®_lcd>; - enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>; - pwms = <&pwm2 0 50000>; + enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>; + pwms = <&pwm2 0 25000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; - backlight_rgb: backlight-rgb { + backlight_dpi: backlight-dpi { compatible = "pwm-backlight"; power-supply = <®_lcd>; enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; - pwms = <&pwm0 0 50000>; - brightness-levels = <0 4 8 16 32 64 128 255>; + pwms = <&pwm0 0 25000>; + brightness-levels = <0 25 33 50 63 75 88 100>; default-brightness-level = <6>; }; @@ -39,38 +40,38 @@ keys { compatible = "gpio-keys"; - key-1 { + key-1 { /* S19 */ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "Switch-1"; + linux,code = <KEY_UP>; + label = "Up"; wakeup-source; debounce-interval = <20>; }; - key-2 { + key-2 { /*S20 */ gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "Switch-2"; + linux,code = <KEY_LEFT>; + label = "Left"; wakeup-source; debounce-interval = <20>; }; - key-3 { + key-3 { /* S21 */ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "Switch-3"; + linux,code = <KEY_DOWN>; + label = "Down"; wakeup-source; debounce-interval = <20>; }; - key-4 { + key-4 { /* S22 */ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "Switch-4"; + linux,code = <KEY_RIGHT>; + label = "Right"; wakeup-source; debounce-interval = <20>; }; - key-5 { + key-5 { /* S23 */ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_5>; - label = "Switch-4"; + linux,code = <KEY_ENTER>; + label = "Center"; wakeup-source; debounce-interval = <20>; }; @@ -118,9 +119,9 @@ hback-porch = <40>; vfront-porch = <13>; vback-porch = <29>; - vsync-len = <3>; + vsync-len = <1>; hsync-active = <1>; - vsync-active = <1>; + vsync-active = <3>; de-active = <1>; pixelclk-active = <0>; }; @@ -135,7 +136,7 @@ rgb { /* Different LCD with compatible timings */ compatible = "rocktech,rk070er9427"; - backlight = <&backlight_rgb>; + backlight = <&backlight_dpi>; enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; power-supply = <®_lcd>; port { @@ -150,7 +151,7 @@ regulator-name = "audio-1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>; + gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -200,15 +201,12 @@ vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; - regulator-name = "SDHI0 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1>, <1800000 0>; - regulator-always-on; }; /* External DU dot clocks */ @@ -248,12 +246,6 @@ }; }; -&audio_clk_a { - clock-frequency = <24576000>; - assigned-clocks = <&versaclock6_bb 4>; - assigned-clock-rates = <24576000>; -}; - &audio_clk_b { clock-frequency = <22579200>; }; @@ -272,21 +264,6 @@ status = "okay"; }; -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; -}; - &du_out_rgb { remote-endpoint = <&rgb_panel>; }; @@ -342,7 +319,7 @@ &i2c2 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -373,12 +350,36 @@ #clock-cells = <1>; clocks = <&x304_clk>; clock-names = "xin"; - /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */ + assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>, <&versaclock6_bb 3>, <&versaclock6_bb 4>; assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + + OUT1 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT2 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT3 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; + + OUT4 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; }; }; @@ -392,13 +393,14 @@ &i2c5 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c5_pins>; pinctrl-names = "default"; codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; + clocks = <&versaclock6_bb 3>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; @@ -481,6 +483,13 @@ }; }; +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; +}; + &ohci0 { dr_mode = "otg"; status = "okay"; @@ -534,6 +543,11 @@ bias-pull-down; }; + msiof1_pins: msiof1 { + groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g"; + function = "msiof1"; + }; + pwm0_pins: pwm0 { groups = "pwm0"; function = "pwm0"; @@ -541,7 +555,7 @@ pwm2_pins: pwm2 { groups = "pwm2_a"; - function = "pwm2_a"; + function = "pwm2"; }; sdhi0_pins: sd0 { @@ -562,7 +576,7 @@ }; sound_clk_pins: sound_clk { - groups = "audio_clk_a_a"; + groups = "audio_clk_a_a", "audio_clk_b_a"; function = "audio_clk"; }; @@ -613,23 +627,6 @@ status = "okay"; - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774A1_CLK_S0D4>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 8ac167aa18f0..8d3a4d6ee885 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/versaclock.h> / { memory@48000000 { @@ -12,11 +13,6 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x80000000>; - }; - osc_32k: osc_32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -89,7 +85,6 @@ pinctrl-names = "default"; uart-has-rtscts; status = "okay"; - max-speed = <4000000>; bluetooth { compatible = "brcm,bcm43438-bt"; @@ -98,6 +93,7 @@ device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>; clocks = <&osc_32k>; clock-names = "extclk"; + max-speed = <4000000>; }; }; @@ -109,7 +105,7 @@ &i2c4 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; pca9654: gpio@20 { compatible = "onnn,pca9654"; @@ -148,7 +144,7 @@ }; eeprom@50 { - compatible = "microchip,at24c64", "atmel,24c64"; + compatible = "microchip,24c64", "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x50>; @@ -170,7 +166,32 @@ <&versaclock5 2>, <&versaclock5 3>, <&versaclock5 4>; + assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>; + + OUT1 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT2 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT3 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT4 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; }; }; @@ -291,6 +312,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; @@ -303,11 +326,3 @@ &usb3s0_clk { clock-frequency = <100000000>; }; - -&vspb { - status = "okay"; -}; - -&vspi0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 2eda9f66ae81..7a3da9b06f67 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -328,6 +328,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts index 2c5b057c30c6..501cb05da228 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -26,4 +26,45 @@ chosen { stdout-path = "serial0:115200n8"; }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774A1_CLK_S0D4>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index d37ec42a1caa..d64fb8b1b86c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -835,6 +835,21 @@ status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774a1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; @@ -2302,6 +2317,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774a1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts new file mode 100644 index 000000000000..71763f4402a7 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774b1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon Embedded Works RZ/G2N Development Kit"; + compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + serial6 = &scif4; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 83523916d360..5b05474dc272 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -709,6 +709,21 @@ status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774b1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774b1-usb-dmac", "renesas,usb-dmac"; @@ -2160,6 +2175,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774b1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a774b1", "renesas,rcar-gen3-sata"; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e0e54342cd4c..20fa3caa050e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1654,6 +1654,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774c0-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts new file mode 100644 index 000000000000..273f062f2909 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774e1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon Embedded Works RZ/G2H Development Kit"; + compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + serial6 = &scif4; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774E1_CLK_S0D4>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 1333b02d623a..8eb006cbd9af 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -890,6 +890,21 @@ status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774e1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774e1-usb-dmac", "renesas,usb-dmac"; @@ -2393,6 +2408,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a774e1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a774e1", "renesas,rcar-gen3-sata"; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 9d60bcf69e4f..5c39152e4570 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -616,6 +616,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a7795", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 53b9aa26c9b1..25d947a81b29 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -585,6 +585,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a7796", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 4b737c616257..e8c31ebec097 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -453,6 +453,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77961-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77961-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77961-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77961-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77961-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -495,6 +565,71 @@ /* placeholder */ }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77961", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4a913df17b1d..657b20d3533b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -455,6 +455,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77965", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 422ec53740cb..04d47c0c9bb9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -217,6 +217,8 @@ vqmmc-supply = <&vddq_vin01>; mmc-hs200-1_8v; bus-width = <8>; + no-sd; + no-sdio; non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index e0ccca2222d2..f74f8b9993f1 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -712,6 +712,8 @@ mmc-hs200-1_8v; mmc-hs400-1_8v; bus-width = <8>; + no-sd; + no-sdio; non-removable; full-pwr-cycle-in-suspend; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 87d41bc076a9..5010f23fafcc 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -420,6 +420,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77990", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 8f471881b7a3..6783c3ad0856 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -496,6 +496,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index e1af7c4782f4..2319271c881b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -193,6 +193,76 @@ reg = <0 0xe6060000 0 0x508>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77995-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77995-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77995-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77995-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77995-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -242,6 +312,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a77995", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 4ba269a4cec8..fa284a7260d6 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2020 Renesas Electronics Corp. */ +#include <dt-bindings/gpio/gpio.h> #include "r8a779a0.dtsi" / { @@ -31,6 +32,40 @@ device_type = "memory"; reg = <0x7 0x00000000 0x0 0x80000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + }; }; &extal_clk { @@ -41,6 +76,109 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c6 { + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + i2c6_pins: i2c6 { + groups = "i2c6"; + function = "i2c6"; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + scif0_pins: scif0 { + groups = "scif0_data", "scif0_ctrl"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; +}; + &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; status = "okay"; }; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 8eda70e5a82b..5617b81dd7dc 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -13,6 +13,7 @@ compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0"; aliases { + ethernet0 = &avb0; serial0 = &scif0; }; @@ -20,3 +21,8 @@ stdout-path = "serial0:115200n8"; }; }; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 6cf77ce9aa93..dfd6ae8b564f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -14,6 +14,16 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -70,6 +80,165 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a779a0-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + status = "disabled"; + }; + + pfc: pin-controller@e6050000 { + compatible = "renesas,pfc-r8a779a0"; + reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, + <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>, + <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>, + <0 0xe6068000 0 0x16c>, <0 0xe6068800 0 0x16c>, + <0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>; + }; + + gpio0: gpio@e6058180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6058180 0 0x54>; + interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 28>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@e6050180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6050180 0 0x54>; + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 32 31>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@e6050980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6050980 0 0x54>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 64 25>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@e6058980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6058980 0 0x54>; + interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 17>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@e6060180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6060180 0 0x54>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 128 27>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@e6060980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6060980 0 0x54>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 917>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 160 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@e6068180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6068180 0 0x54>; + interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 192 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@e6068980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6068980 0 0x54>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 224 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio@e6069180 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6069180 0 0x54>; + interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 256 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio9: gpio@e6069980 { + compatible = "renesas,gpio-r8a779a0"; + reg = <0 0xe6069980 0 0x54>; + interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 288 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779a0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -91,6 +260,464 @@ #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + dmas = <&dmac1 0x97>, <&dmac1 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + dmas = <&dmac1 0x99>, <&dmac1 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + dmas = <&dmac1 0x9b>, <&dmac1 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + compatible = "renesas,i2c-r8a779a0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 524>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 524>; + dmas = <&dmac1 0x9d>, <&dmac1 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 515>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a779a0", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x37>, <&dmac1 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + avb0: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 211>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb1: ethernet@e6810000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6810000 0 0x800>; + interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 212>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 212>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb2: ethernet@e6820000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6820000 0 0x1000>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 213>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 213>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb3: ethernet@e6830000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6830000 0 0x1000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 214>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 214>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb4: ethernet@e6840000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6840000 0 0x1000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 215>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 215>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + avb5: ethernet@e6850000 { + compatible = "renesas,etheravb-r8a779a0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6850000 0 0x1000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 216>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 216>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779a0", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -100,11 +727,221 @@ <&cpg CPG_CORE R8A779A0_CLK_S1D2>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; }; + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x57>, <&dmac1 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a779a0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>, + <&cpg CPG_CORE R8A779A0_CLK_S1D2>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x59>, <&dmac1 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 618>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 619>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 619>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 620>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 620>; + dmas = <&dmac1 0x45>, <&dmac1 0x44>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 621>; + dmas = <&dmac1 0x47>, <&dmac1 0x46>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof4: spi@e6c20000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c20000 0 0x0064>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + dmas = <&dmac1 0x49>, <&dmac1 0x48>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof5: spi@e6c28000 { + compatible = "renesas,msiof-r8a779a0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c28000 0 0x0064>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 623>; + dmas = <&dmac1 0x4b>, <&dmac1 0x4a>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dmac1: dma-controller@e7350000 { + compatible = "renesas,dmac-r8a779a0"; + reg = <0 0xe7350000 0 0x1000>, + <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", + "ch14", "ch15"; + clocks = <&cpg CPG_MOD 709>; + clock-names = "fck"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 709>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7351000 { + compatible = "renesas,dmac-r8a779a0"; + reg = <0 0xe7351000 0 0x1000>, + <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 710>; + clock-names = "fck"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 710>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a779a0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 706>; + max-frequency = <200000000>; + status = "disabled"; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 6c643ed74fc5..c22bb38994e8 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -831,6 +831,8 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-hs400-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; full-pwr-cycle-in-suspend; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 8f8d7371d8e2..a04eae55dd6c 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -468,6 +468,8 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-hs400-1_8v; + no-sd; + no-sdio; non-removable; full-pwr-cycle-in-suspend; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1ab55a124a87..62d3abc17a24 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb @@ -33,6 +34,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 64193292d26c..c45b0cfcae09 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -25,6 +25,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -703,22 +706,15 @@ clock-names = "pclk", "timer"; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac: dmac@ff240000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff240000 0x0 0x4000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; + dmac: dmac@ff240000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff240000 0x0 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; }; tsadc: tsadc@ff280000 { @@ -973,6 +969,21 @@ status = "disabled"; }; + nfc: nand-controller@ff3b0000 { + compatible = "rockchip,px30-nfc"; + reg = <0x0 0xff3b0000 0x0 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0 + &flash_rdn &flash_rdy &flash_wrn &flash_dqs>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + gpu: gpu@ff400000 { compatible = "rockchip,px30-mali", "arm,mali-bifrost"; reg = <0x0 0xff400000 0x0 0x4000>; @@ -1107,102 +1118,102 @@ }; qos_gmac: qos@ff518000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff518000 0x0 0x20>; }; qos_gpu: qos@ff520000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff520000 0x0 0x20>; }; qos_sdmmc: qos@ff52c000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff52c000 0x0 0x20>; }; qos_emmc: qos@ff538000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538000 0x0 0x20>; }; qos_nand: qos@ff538080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538080 0x0 0x20>; }; qos_sdio: qos@ff538100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538100 0x0 0x20>; }; qos_sfc: qos@ff538180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538180 0x0 0x20>; }; qos_usb_host: qos@ff540000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff540000 0x0 0x20>; }; qos_usb_otg: qos@ff540080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff540080 0x0 0x20>; }; qos_isp_128: qos@ff548000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548000 0x0 0x20>; }; qos_isp_rd: qos@ff548080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548080 0x0 0x20>; }; qos_isp_wr: qos@ff548100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548100 0x0 0x20>; }; qos_isp_m1: qos@ff548180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548180 0x0 0x20>; }; qos_vip: qos@ff548200 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548200 0x0 0x20>; }; qos_rga_rd: qos@ff550000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550000 0x0 0x20>; }; qos_rga_wr: qos@ff550080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550080 0x0 0x20>; }; qos_vop_m0: qos@ff550100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550100 0x0 0x20>; }; qos_vop_m1: qos@ff550180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550180 0x0 0x20>; }; qos_vpu: qos@ff558000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff558000 0x0 0x20>; }; qos_vpu_r128: qos@ff558080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff558080 0x0 0x20>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index 2560b98771ca..3a035a189450 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -24,6 +24,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &sdmmc; + mmc1 = &emmc; + mmc2 = &sdio; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -513,33 +516,26 @@ status = "disabled"; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; - dmac0: dma-controller@ff2c0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff2c0000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - dmac1: dma-controller@ff2d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff2d0000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; }; i2s_2ch_0: i2s@ff350000 { @@ -629,6 +625,21 @@ status = "disabled"; }; + nfc: nand-controller@ff4b0000 { + compatible = "rockchip,rk3308-nfc", + "rockchip,rv1108-nfc"; + reg = <0x0 0xff4b0000 0x0 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 + &flash_rdn &flash_rdy &flash_wrn>; + pinctrl-names = "default"; + status = "disabled"; + }; + cru: clock-controller@ff500000 { compatible = "rockchip,rk3308-cru"; reg = <0x0 0xff500000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index 1eecad724f04..faf496d789cf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -50,6 +50,7 @@ sys_led: led-1 { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; label = "nanopi-r2s:red:sys"; + default-state = "on"; }; wan_led: led-2 { @@ -284,7 +285,7 @@ }; }; - ethernet-phy { + gmac2io { eth_phy_reset_pin: eth-phy-reset-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts new file mode 100644 index 000000000000..2d71ca7e429c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org> + * + * Based on ./rk3328-rock64.dts, which is + * + * Copyright (c) 2017 PINE64 + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> + +#include "rk3328.dtsi" + +/ { + model = "Radxa ROCK Pi E"; + compatible = "radxa,rockpi-e", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1750000>; + + /* This button is unpopulated out of the factory. */ + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pin>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_pin>; + regulator-name = "vcc_sd"; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_host_5v: vcc-host-5v-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + enable-active-high; + regulator-name = "vcc_host_5v"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_wifi: vcc-wifi-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en>; + regulator-name = "vcc_wifi"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; +}; + +&analog_sound { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac2phy { + pinctrl-names = "default"; + pinctrl-0 = <&fephyled_linkm1>, <&fephyled_rxm1>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + pmuio-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_io>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + ephy { + eth_phy_int_pin: eth-phy-int-pin { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + led_pin: led-pin { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_en: wifi-en { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 86cfb5c50a94..c984662043da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -84,34 +84,32 @@ }; }; - sound { - compatible = "audio-graph-card"; - label = "rockchip,rk3328"; - dais = <&i2s1_p0 - &spdif_p0>; + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; }; - spdif-dit { + spdif_dit: spdif-dit { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; - - port { - dit_p0_0: endpoint { - remote-endpoint = <&spdif_p0_0>; - }; - }; }; }; +&analog_sound { + status = "okay"; +}; + &codec { mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; status = "okay"; - - port@0 { - codec_p0_0: endpoint { - remote-endpoint = <&i2s1_p0_0>; - }; - }; }; &cpu0 { @@ -163,6 +161,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &hdmiphy { status = "okay"; }; @@ -278,16 +280,12 @@ }; }; -&i2s1 { +&i2s0 { status = "okay"; +}; - i2s1_p0: port { - i2s1_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&codec_p0_0>; - }; - }; +&i2s1 { + status = "okay"; }; &io_domains { @@ -337,12 +335,6 @@ &spdif { pinctrl-0 = <&spdifm0_tx>; status = "okay"; - - spdif_p0: port { - spdif_p0_0: endpoint { - remote-endpoint = <&dit_p0_0>; - }; - }; }; &spi0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index db0d5c8e5f96..063ed0adbec4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -27,6 +27,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; ethernet0 = &gmac2io; ethernet1 = &gmac2phy; }; @@ -142,24 +145,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac: dmac@ff1f0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff1f0000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - }; - analog_sound: analog-sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -504,6 +489,17 @@ status = "disabled"; }; + dmac: dmac@ff1f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff1f0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + thermal-zones { soc_thermal: soc-thermal { polling-delay-passive = <20>; @@ -928,6 +924,7 @@ phy-mode = "rmii"; phy-handle = <&phy>; snps,txpbl = <0x4>; + clock_in_out = "output"; status = "disabled"; mdio { diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 3746f23dc3df..7af68ec3feae 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -25,6 +25,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + mmc0 = &sdmmc; + mmc1 = &sdio0; + mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -136,37 +139,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_peri: dma-controller@ff250000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff250000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC_PERI>; - clock-names = "apb_pclk"; - }; - - dmac_bus: dma-controller@ff600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff600000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC_BUS>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, @@ -399,8 +371,20 @@ status = "disabled"; }; + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC_PERI>; + clock-names = "apb_pclk"; + }; + thermal-zones { - cpu { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -444,7 +428,7 @@ }; }; - gpu { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -532,6 +516,18 @@ status = "disabled"; }; + dmac_bus: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC_BUS>; + clock-names = "apb_pclk"; + }; + i2c0: i2c@ff650000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 2a561be724b2..66c725a34220 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -331,7 +331,7 @@ pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index e0d75617bb7e..452728b82e42 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -95,6 +95,7 @@ }; &pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; vpcie3v3-supply = <&vcc3v3_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts new file mode 100644 index 000000000000..72182c58cc46 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPi M4B board device tree source + * + * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; +#include "rk3399-nanopi-m4.dts" + +/ { + model = "FriendlyElec NanoPi M4B"; + compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1500000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; +}; + +/* No USB type-C PD power manager */ +/delete-node/ &fusb0; + +&i2c4 { + status = "disabled"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb2>; +}; + +&u2phy0_otg { + phy-supply = <&vbus_typec>; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_usb1>; +}; + +&vbus_typec { + enable-active-high; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 76a8b40a93c6..48ed4aaa37f3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -504,7 +504,6 @@ }; &pcie0 { - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; num-lanes = <2>; vpcie0v9-supply = <&vcca0v9_s3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts index c88295782e7b..1a23e8f3cdf6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts @@ -63,6 +63,20 @@ }; +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_thermal { + sustainable-power = <1550>; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; }; @@ -125,45 +139,6 @@ status = "okay"; }; -&thermal_zones { - cpu_thermal: cpu { - polling-delay-passive = <100>; - polling-delay = <1000>; - thermal-sensors = <&tsadc 0>; - sustainable-power = <1550>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <65000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_alert1: cpu_alert1 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - - trip = <&cpu_alert1>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 6e553ff47534..5ab0b9edfc88 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -72,10 +72,27 @@ sound { compatible = "audio-graph-card"; - label = "rockchip,rk3399"; + label = "Analog"; dais = <&i2s1_p0>; }; + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -698,6 +715,16 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdif_bus_1>; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &spi1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 2551b238b97c..edbbf35fe19e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -200,35 +200,6 @@ #clock-cells = <0>; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_bus: dma-controller@ff6d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0_PERILP>; - clock-names = "apb_pclk"; - }; - - dmac_peri: dma-controller@ff6e0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1_PERILP>; - clock-names = "apb_pclk"; - }; - }; - pcie0: pcie@f8000000 { compatible = "rockchip,rk3399-pcie"; reg = <0x0 0xf8000000 0x0 0x2000000>, @@ -259,8 +230,8 @@ <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 - 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, + <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, @@ -764,7 +735,7 @@ }; thermal_zones: thermal-zones { - cpu_thermal: cpu { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; polling-delay = <1000>; @@ -808,7 +779,7 @@ }; }; - gpu_thermal: gpu { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; polling-delay = <1000>; @@ -858,127 +829,127 @@ }; qos_emmc: qos@ffa58000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa58000 0x0 0x20>; }; qos_gmac: qos@ffa5c000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa5c000 0x0 0x20>; }; qos_pcie: qos@ffa60080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60080 0x0 0x20>; }; qos_usb_host0: qos@ffa60100 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60100 0x0 0x20>; }; qos_usb_host1: qos@ffa60180 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa60180 0x0 0x20>; }; qos_usb_otg0: qos@ffa70000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa70000 0x0 0x20>; }; qos_usb_otg1: qos@ffa70080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa70080 0x0 0x20>; }; qos_sd: qos@ffa74000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa74000 0x0 0x20>; }; qos_sdioaudio: qos@ffa76000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa76000 0x0 0x20>; }; qos_hdcp: qos@ffa90000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa90000 0x0 0x20>; }; qos_iep: qos@ffa98000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffa98000 0x0 0x20>; }; qos_isp0_m0: qos@ffaa0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa0000 0x0 0x20>; }; qos_isp0_m1: qos@ffaa0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa0080 0x0 0x20>; }; qos_isp1_m0: qos@ffaa8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa8000 0x0 0x20>; }; qos_isp1_m1: qos@ffaa8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffaa8080 0x0 0x20>; }; qos_rga_r: qos@ffab0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab0000 0x0 0x20>; }; qos_rga_w: qos@ffab0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab0080 0x0 0x20>; }; qos_video_m0: qos@ffab8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffab8000 0x0 0x20>; }; qos_video_m1_r: qos@ffac0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac0000 0x0 0x20>; }; qos_video_m1_w: qos@ffac0080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac0080 0x0 0x20>; }; qos_vop_big_r: qos@ffac8000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac8000 0x0 0x20>; }; qos_vop_big_w: qos@ffac8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffac8080 0x0 0x20>; }; qos_vop_little: qos@ffad0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffad0000 0x0 0x20>; }; qos_perihp: qos@ffad8080 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffad8080 0x0 0x20>; }; qos_gpu: qos@ffae0000 { - compatible = "syscon"; + compatible = "rockchip,rk3399-qos", "syscon"; reg = <0x0 0xffae0000 0x0 0x20>; }; @@ -1350,6 +1321,28 @@ }; }; + dmac_bus: dma-controller@ff6d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6d0000 0x0 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0_PERILP>; + clock-names = "apb_pclk"; + }; + + dmac_peri: dma-controller@ff6e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6e0000 0x0 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1_PERILP>; + clock-names = "apb_pclk"; + }; + pmucru: pmu-clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi index addeb0efc616..4bb5d650df9c 100644 --- a/arch/arm64/boot/dts/synaptics/as370.dtsi +++ b/arch/arm64/boot/dts/synaptics/as370.dtsi @@ -143,7 +143,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -161,7 +161,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index 15625b99e336..0949acee4728 100644 --- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -140,7 +140,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -158,7 +158,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -176,7 +176,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -194,7 +194,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -269,7 +269,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; @@ -284,7 +284,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 12591a854020..ceb579fb427d 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -256,7 +256,7 @@ #size-cells = <0>; }; - sdhci0: sdhci@4f80000 { + sdhci0: mmc@4f80000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; @@ -280,7 +280,7 @@ dma-coherent; }; - sdhci1: sdhci@4fa0000 { + sdhci1: mmc@4fa0000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index d84c0bc05023..a9fc1af03f27 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -56,7 +56,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; /* Recommendation from GIC500 TRM Table A.3 */ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 331b388e1d1b..4a7182abccf5 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -6,8 +6,10 @@ /dts-v1/; #include "k3-j7200-som-p0.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> / { chosen { @@ -218,3 +220,39 @@ ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + }; + + serdes0_qsgmii_link: phy@1 { + reg = <2>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_QSGMII>; + resets = <&serdes_wiz0 3>; + }; +}; + +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie1_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index b0094212aa82..17477ab0fd8e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -2,9 +2,16 @@ /* * Device Tree Source for J7200 SoC Family Main Domain peripherals * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +/ { + serdes_refclk: serdes-refclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -499,8 +506,8 @@ reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 91 3>, <&k3_clks 91 0>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 91 0>, <&k3_clks 91 3>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x6>; @@ -518,8 +525,8 @@ reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 92 2>, <&k3_clks 92 1>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 92 1>, <&k3_clks 92 2>; ti,otap-del-sel-legacy = <0x0>; ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; @@ -531,6 +538,110 @@ dma-coherent; }; + serdes_wiz0: wiz@5060000 { + compatible = "ti,j721e-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <4>; + #reset-cells = <1>; + ranges = <0x5060000 0x0 0x5060000 0x10000>; + + assigned-clocks = <&k3_clks 292 85>; + assigned-clock-parents = <&k3_clks 292 89>; + + wiz0_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 292 85>, <&serdes_refclk>; + clock-output-names = "wiz0_pll0_refclk"; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll0_refclk>; + assigned-clock-parents = <&k3_clks 292 85>; + }; + + wiz0_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 292 85>, <&serdes_refclk>; + clock-output-names = "wiz0_pll1_refclk"; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&k3_clks 292 85>; + }; + + wiz0_refclk_dig: refclk-dig { + clocks = <&k3_clks 292 85>, <&serdes_refclk>; + clock-output-names = "wiz0_refclk_dig"; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 85>; + }; + + wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz0_refclk_dig>; + #clock-cells = <0>; + }; + + serdes0: serdes@5060000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x05060000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&wiz0_pll0_refclk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pcie1_rc: pcie@2910000 { + compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 6>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + cdns,no-bar-match-nbits = <64>; + vendor-id = /bits/ 16 <0x104c>; + device-id = /bits/ 16 <0xb00f>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 6>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + }; + usbss0: cdns-usb@4104000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4104000 0x00 0x100>; @@ -560,4 +671,44 @@ dr_mode = "otg"; }; }; + + main_r5fss0: r5fss@5c00000 { + compatible = "ti,j7200-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c00000 0x00 0x5c00000 0x20000>, + <0x5d00000 0x00 0x5d00000 0x20000>; + power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@5c00000 { + compatible = "ti,j7200-r5f"; + reg = <0x5c00000 0x00010000>, + <0x5c10000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <245>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 245 1>; + firmware-name = "j7200-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@5d00000 { + compatible = "ti,j7200-r5f"; + reg = <0x5d00000 0x00008000>, + <0x5d10000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <246>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 246 1>; + firmware-name = "j7200-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index bb1fe9c12e44..359e3e8a8cd0 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -289,4 +289,44 @@ compatible = "ti,am3359-adc"; }; }; + + mcu_r5fss0: r5fss@41000000 { + compatible = "ti,j7200-r5fss"; + ti,cluster-mode = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x41000000 0x00 0x41000000 0x20000>, + <0x41400000 0x00 0x41400000 0x20000>; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + + mcu_r5fss0_core0: r5f@41000000 { + compatible = "ti,j7200-r5f"; + reg = <0x41000000 0x00010000>, + <0x41010000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <250>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 250 1>; + firmware-name = "j7200-mcu-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + mcu_r5fss0_core1: r5f@41400000 { + compatible = "ti,j7200-r5f"; + reg = <0x41400000 0x00008000>, + <0x41410000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <251>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 251 1>; + firmware-name = "j7200-mcu-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 7b5e9aa0324e..a988e2ab2ba1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -25,6 +25,60 @@ alignment = <0x1000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a4000000 { + reg = <0x00 0xa4000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; }; @@ -141,6 +195,30 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index 66169bcf7c9a..b7005b803149 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -114,7 +114,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index b32df591c766..8c84dafb7125 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -28,38 +28,6 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - pcie0_ctrl: syscon@4070 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004070 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4070 0x4070 0x4>; - }; - - pcie1_ctrl: syscon@4074 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004074 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4074 0x4074 0x4>; - }; - - pcie2_ctrl: syscon@4078 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004078 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4078 0x4078 0x4>; - }; - - pcie3_ctrl: syscon@407c { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x0000407c 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x407c 0x407c 0x4>; - }; - serdes_ln_ctrl: mux@4080 { compatible = "mmio-mux"; reg = <0x00004080 0x50>; @@ -618,7 +586,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; @@ -645,13 +613,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 239 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -667,7 +634,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; @@ -694,13 +661,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 240 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -716,7 +682,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; @@ -743,13 +709,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 241 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -765,7 +730,7 @@ interrupt-names = "link_state"; interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; @@ -792,13 +757,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>; - ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 242 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -1068,13 +1032,13 @@ clock-names = "gpio"; }; - main_sdhci0: sdhci@4f80000 { + main_sdhci0: mmc@4f80000 { compatible = "ti,j721e-sdhci-8bit"; reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 91 0>, <&k3_clks 91 1>; assigned-clocks = <&k3_clks 91 1>; assigned-clock-parents = <&k3_clks 91 2>; bus-width = <8>; @@ -1090,13 +1054,13 @@ dma-coherent; }; - main_sdhci1: sdhci@4fb0000 { + main_sdhci1: mmc@4fb0000 { compatible = "ti,j721e-sdhci-4bit"; reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 92 5>, <&k3_clks 92 0>; assigned-clocks = <&k3_clks 92 0>; assigned-clock-parents = <&k3_clks 92 1>; ti,otap-del-sel-legacy = <0x0>; @@ -1110,13 +1074,13 @@ dma-coherent; }; - main_sdhci2: sdhci@4f98000 { + main_sdhci2: mmc@4f98000 { compatible = "ti,j721e-sdhci-4bit"; reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 93 5>, <&k3_clks 93 0>; assigned-clocks = <&k3_clks 93 0>; assigned-clock-parents = <&k3_clks 93 1>; ti,otap-del-sel-legacy = <0x0>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index cc483f7344af..f0587fde147e 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -115,7 +115,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a72-pmu"; /* Recommendation from GIC500 TRM Table A.3 */ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index 48fa8776e36f..bf0620afe117 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -59,3 +59,12 @@ }; }; }; + +&wdt { + status = "okay"; + clocks = <&wdt_clk>; +}; + +&gpio { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 3366786699fc..17934fd9a14c 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -148,6 +148,12 @@ clock-output-names = "clk300mhz"; }; + wdt_clk: wdt-clk { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + soc { #address-cells = <2>; #size-cells = <2>; @@ -171,6 +177,17 @@ reg = <0 0x24190000 0 0x10000>; }; + gpio: gpio@28020000 { + compatible = "toshiba,gpio-tmpv7708"; + reg = <0 0x28020000 0 0x1000>; + #gpio-cells = <0x2>; + gpio-ranges = <&pmux 0 0 32>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + }; + uart0: serial@28200000 { compatible = "arm,pl011", "arm,primecell"; reg = <0 0x28200000 0 0x1000>; @@ -409,6 +426,12 @@ snps,tso; status = "disabled"; }; + + wdt: wdt@28330000 { + compatible = "toshiba,visconti-wdt"; + reg = <0 0x28330000 0 0x1000>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 60f5443f3ef4..11fb4fd3ebd4 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -13,5 +13,6 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index c94c3bb67edc..cf5295224750 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -116,6 +116,10 @@ clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; +&nand0 { + clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + &gem0 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>, @@ -160,6 +164,10 @@ clocks = <&zynqmp_clk PCIE_REF>; }; +&qspi { + clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + &sata { clocks = <&zynqmp_clk SATA_REF>; }; @@ -215,3 +223,17 @@ &watchdog0 { clocks = <&zynqmp_clk WDT>; }; + +&lpd_watchdog { + clocks = <&zynqmp_clk LPD_WDT>; +}; + +&zynqmp_dpdma { + clocks = <&zynqmp_clk DPDMA_REF>; +}; + +&zynqmp_dpsub { + clocks = <&zynqmp_clk TOPSW_LSBUS>, + <&zynqmp_clk DP_AUDIO_REF>, + <&zynqmp_clk DP_VIDEO_REF>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 68ecd0f7b2f2..a53598c3624b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -15,6 +15,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU100 RevC"; @@ -108,6 +109,18 @@ compatible = "iio-hwmon"; io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; + + si5335a_0: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5335a_1: clk27 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; }; &dcc { @@ -224,6 +237,13 @@ }; }; +&psgtr { + status = "okay"; + /* usb3, dps */ + clocks = <&si5335a_0>, <&si5335a_1>; + clock-names = "ref0", "ref1"; +}; + &rtc { status = "okay"; }; @@ -233,11 +253,13 @@ status = "okay"; no-1-8-v; disable-wp; + xlnx,mio-bank = <0>; }; &sdhci1 { status = "okay"; bus-width = <0x4>; + xlnx,mio-bank = <0>; non-removable; disable-wp; cap-power-off-card; @@ -293,3 +315,14 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>, + <&psgtr 0 PHY_TYPE_DP 1 1>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index f1255f635dfd..12e8bd48dc8c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU102 RevA"; @@ -132,6 +133,19 @@ compatible = "iio-hwmon"; io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + refhdmi: refhdmi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <114285000>; + }; }; &can1 { @@ -483,9 +497,56 @@ #size-cells = <0>; reg = <1>; si5341: clock-generator@36 { /* SI5341 - u69 */ + compatible = "silabs,si5341"; reg = <0x36>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + clock-output-names = "si5341"; + + si5341_0: out@0 { + /* refclk0 for PS-GT, used for DP */ + reg = <0>; + always-on; + }; + si5341_2: out@2 { + /* refclk2 for PS-GT, used for USB3 */ + reg = <2>; + always-on; + }; + si5341_3: out@3 { + /* refclk3 for PS-GT, used for SATA */ + reg = <3>; + always-on; + }; + si5341_4: out@4 { + /* refclk4 for PS-GT, used for PCIE slot */ + reg = <4>; + always-on; + }; + si5341_5: out@5 { + /* refclk5 for PS-GT, used for PCIE */ + reg = <5>; + always-on; + }; + si5341_6: out@6 { + /* refclk6 PL CLK125 */ + reg = <6>; + always-on; + }; + si5341_7: out@7 { + /* refclk7 PL CLK74 */ + reg = <7>; + always-on; + }; + si5341_9: out@9 { + /* refclk9 used for PS_REF_CLK 33.3 MHz */ + reg = <9>; + always-on; + }; }; - }; i2c@2 { #address-cells = <1>; @@ -526,6 +587,17 @@ * interrupt-parent = <&>; * interrupts = <>; */ + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + clocks = <&refhdmi>; + clock-names = "xtal"; + clock-output-names = "si5328"; + + si5328_clk: clk0@0 { + reg = <0>; + clock-frequency = <27000000>; + }; }; }; /* 5 - 7 unconnected */ @@ -592,6 +664,13 @@ status = "okay"; }; +&psgtr { + status = "okay"; + /* pcie, sata, usb3, dp */ + clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + clock-names = "ref0", "ref1", "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -607,12 +686,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; }; &uart0 { @@ -632,3 +714,13 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 7a4614e3f5fa..5637e1c17fdf 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU104 RevA"; @@ -36,6 +37,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + clock_8t49n287_5: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clock_8t49n287_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_8t49n287_3: clk27 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; }; &can1 { @@ -158,6 +177,13 @@ status = "okay"; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + &sata { status = "okay"; /* SATA OOB timing settings */ @@ -169,12 +195,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; disable-wp; }; @@ -195,3 +224,14 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts new file mode 100644 index 000000000000..7f2e32831b05 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2020, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP ZCU104 RevC"; + compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>; + }; + + clock_8t49n287_5: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clock_8t49n287_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_8t49n287_3: clk27 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: ethernet-phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps5401@43 { /* IRPS5401 - u175 */ + compatible = "infineon,irps5401"; + reg = <0x43>; /* pmbus / i2c 0x13 */ + }; + irps5401_44: irps5401@44 { /* IRPS5401 - u180 */ + compatible = "infineon,irps5401"; + reg = <0x44>; /* pmbus / i2c 0x14 */ + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + u183: ina226@40 { /* u183 */ + compatible = "ti,ina226"; + #io-channel-cells = <1>; + reg = <0x40>; + shunt-resistor = <5000>; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 4, 6 not connected */ + }; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + xlnx,mio-bank = <1>; + disable-wp; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&watchdog0 { + status = "okay"; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 6e9efe233838..18771e868399 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU106 RevA"; @@ -132,6 +133,19 @@ compatible = "iio-hwmon"; io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + refhdmi: refhdmi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <114285000>; + }; }; &can1 { @@ -142,6 +156,17 @@ status = "okay"; }; +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; + /* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; @@ -482,7 +507,45 @@ #size-cells = <0>; reg = <1>; si5341: clock-generator@36 { /* SI5341 - u69 */ + compatible = "silabs,si5341"; reg = <0x36>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + clock-output-names = "si5341"; + + si5341_0: out@0 { + /* refclk0 for PS-GT, used for DP */ + reg = <0>; + always-on; + }; + si5341_2: out@2 { + /* refclk2 for PS-GT, used for USB3 */ + reg = <2>; + always-on; + }; + si5341_3: out@3 { + /* refclk3 for PS-GT, used for SATA */ + reg = <3>; + always-on; + }; + si5341_6: out@6 { + /* refclk6 PL CLK125 */ + reg = <6>; + always-on; + }; + si5341_7: out@7 { + /* refclk7 PL CLK74 */ + reg = <7>; + always-on; + }; + si5341_9: out@9 { + /* refclk9 used for PS_REF_CLK 33.3 MHz */ + reg = <9>; + always-on; + }; }; }; @@ -520,6 +583,22 @@ reg = <4>; si5328: clock-generator@69 {/* SI5328 - u20 */ reg = <0x69>; + /* + * Chip has interrupt present connected to PL + * interrupt-parent = <&>; + * interrupts = <>; + */ + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + clocks = <&refhdmi>; + clock-names = "xtal"; + clock-output-names = "si5328"; + + si5328_clk: clk0@0 { + reg = <0>; + clock-frequency = <27000000>; + }; }; }; i2c@5 { @@ -591,6 +670,13 @@ }; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + clock-names = "ref1", "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -606,12 +692,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; }; &uart0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 2e92634c77f9..d4b68f0d0098 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP ZCU111 RevA"; @@ -116,6 +117,13 @@ compatible = "iio-hwmon"; io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; }; + + /* 48MHz reference crystal */ + ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; }; &dcc { @@ -374,9 +382,46 @@ #size-cells = <0>; reg = <1>; si5341: clock-generator@36 { /* SI5341 - u46 */ + compatible = "silabs,si5341"; reg = <0x36>; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + clock-output-names = "si5341"; + + si5341_0: out@0 { + /* refclk0 for PS-GT, used for DP */ + reg = <0>; + always-on; + }; + si5341_2: out@2 { + /* refclk2 for PS-GT, used for USB3 */ + reg = <2>; + always-on; + }; + si5341_3: out@3 { + /* refclk3 for PS-GT, used for SATA */ + reg = <3>; + always-on; + }; + si5341_5: out@5 { + /* refclk5 PL CLK100 */ + reg = <5>; + always-on; + }; + si5341_6: out@6 { + /* refclk6 PL CLK125 */ + reg = <6>; + always-on; + }; + si5341_9: out@9 { + /* refclk9 used for PS_REF_CLK 33.3 MHz */ + reg = <9>; + always-on; + }; }; - }; i2c@2 { #address-cells = <1>; @@ -410,7 +455,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5328: clock-generator@69 { /* SI5328 - u48 */ + si5382: clock-generator@69 { /* SI5382 - u48 */ reg = <0x69>; }; }; @@ -497,6 +542,13 @@ }; }; +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + clock-names = "ref1", "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -512,12 +564,15 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; no-1-8-v; + xlnx,mio-bank = <1>; }; &uart0 { @@ -529,3 +584,14 @@ status = "okay"; dr_mode = "host"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 1>, + <&psgtr 0 PHY_TYPE_DP 1 1>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 68923fbd0e89..a3b391d18787 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -12,6 +12,7 @@ * the License, or (at your option) any later version. */ +#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h> #include <dt-bindings/power/xlnx-zynqmp-power.h> #include <dt-bindings/reset/xlnx-zynqmp-resets.h> @@ -99,7 +100,7 @@ }; }; - zynqmp_ipi { + zynqmp_ipi: zynqmp_ipi { compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; interrupts = <0 35 4>; @@ -187,6 +188,11 @@ xlnx_aes: zynqmp-aes { compatible = "xlnx,zynqmp-aes"; }; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; }; }; @@ -265,6 +271,8 @@ interrupts = <0 124 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14e8>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -276,6 +284,8 @@ interrupts = <0 125 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14e9>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -287,6 +297,8 @@ interrupts = <0 126 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ea>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -298,6 +310,8 @@ interrupts = <0 127 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14eb>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -309,6 +323,8 @@ interrupts = <0 128 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ec>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -320,6 +336,8 @@ interrupts = <0 129 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ed>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -331,6 +349,8 @@ interrupts = <0 130 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ee>; power-domains = <&zynqmp_firmware PD_GDMA>; }; @@ -342,11 +362,14 @@ interrupts = <0 131 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + #stream-id-cells = <1>; + iommus = <&smmu 0x14ef>; power-domains = <&zynqmp_firmware PD_GDMA>; }; gic: interrupt-controller@f9010000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; reg = <0x0 0xf9010000 0x0 0x10000>, <0x0 0xf9020000 0x0 0x20000>, @@ -369,6 +392,8 @@ interrupts = <0 77 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x868>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -380,6 +405,8 @@ interrupts = <0 78 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x869>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -391,6 +418,8 @@ interrupts = <0 79 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86a>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -402,6 +431,8 @@ interrupts = <0 80 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86b>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -413,6 +444,8 @@ interrupts = <0 81 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86c>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -424,6 +457,8 @@ interrupts = <0 82 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86d>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -435,6 +470,8 @@ interrupts = <0 83 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86e>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -446,6 +483,8 @@ interrupts = <0 84 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + #stream-id-cells = <1>; + iommus = <&smmu 0x86f>; power-domains = <&zynqmp_firmware PD_ADMA>; }; @@ -456,6 +495,20 @@ interrupts = <0 112 4>; }; + nand0: nand-controller@ff100000 { + compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10"; + status = "disabled"; + reg = <0x0 0xff100000 0x0 0x1000>; + clock-names = "controller", "bus"; + interrupt-parent = <&gic>; + interrupts = <0 14 4>; + #address-cells = <1>; + #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x872>; + power-domains = <&zynqmp_firmware PD_NAND>; + }; + gem0: ethernet@ff0b0000 { compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; @@ -465,6 +518,8 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; }; @@ -477,6 +532,8 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; }; @@ -489,6 +546,8 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; }; @@ -501,12 +560,15 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; }; gpio: gpio@ff0a0000 { compatible = "xlnx,zynqmp-gpio-1.0"; status = "disabled"; + #address-cells = <0>; #gpio-cells = <0x2>; gpio-controller; interrupt-parent = <&gic>; @@ -576,6 +638,22 @@ }; }; + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + status = "disabled"; + clock-names = "ref_clk", "pclk"; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + num-cs = <1>; + reg = <0x0 0xff0f0000 0x0 0x1000>, + <0x0 0xc0000000 0x0 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x873>; + power-domains = <&zynqmp_firmware PD_QSPI>; + }; + psgtr: phy@fd400000 { compatible = "xlnx,zynqmp-psgtr-v1.1"; status = "disabled"; @@ -602,6 +680,9 @@ interrupt-parent = <&gic>; interrupts = <0 133 4>; power-domains = <&zynqmp_firmware PD_SATA>; + #stream-id-cells = <4>; + iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, + <&smmu 0x4c2>, <&smmu 0x4c3>; }; sdhci0: mmc@ff160000 { @@ -611,6 +692,8 @@ interrupts = <0 48 4>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #stream-id-cells = <1>; + iommus = <&smmu 0x870>; #clock-cells = <1>; clock-output-names = "clk_out_sd0", "clk_in_sd0"; power-domains = <&zynqmp_firmware PD_SD_0>; @@ -623,6 +706,8 @@ interrupts = <0 49 4>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #stream-id-cells = <1>; + iommus = <&smmu 0x871>; #clock-cells = <1>; clock-output-names = "clk_out_sd1", "clk_in_sd1"; power-domains = <&zynqmp_firmware PD_SD_1>; @@ -631,6 +716,7 @@ smmu: iommu@fd800000 { compatible = "arm,mmu-500"; reg = <0x0 0xfd800000 0x0 0x20000>; + #iommu-cells = <1>; status = "disabled"; #global-interrupts = <1>; interrupt-parent = <&gic>; @@ -753,5 +839,45 @@ reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <10>; }; + + lpd_watchdog: watchdog@ff150000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xff150000 0x0 0x1000>; + timeout-sec = <10>; + }; + + zynqmp_dpdma: dma-controller@fd4c0000 { + compatible = "xlnx,zynqmp-dpdma"; + status = "disabled"; + reg = <0x0 0xfd4c0000 0x0 0x1000>; + interrupts = <0 122 4>; + interrupt-parent = <&gic>; + clock-names = "axi_clk"; + #dma-cells = <1>; + }; + + zynqmp_dpsub: display@fd4a0000 { + compatible = "xlnx,zynqmp-dpsub-1.7"; + status = "disabled"; + reg = <0x0 0xfd4a0000 0x0 0x1000>, + <0x0 0xfd4aa000 0x0 0x1000>, + <0x0 0xfd4ab000 0x0 0x1000>, + <0x0 0xfd4ac000 0x0 0x1000>; + reg-names = "dp", "blend", "av_buf", "aud"; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + clock-names = "dp_apb_clk", "dp_aud_clk", + "dp_vtc_pixel_clk_in"; + power-domains = <&zynqmp_firmware PD_DP>; + resets = <&zynqmp_reset ZYNQMP_RESET_DP>; + dma-names = "vid0", "vid1", "vid2", "gfx0"; + dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>, + <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>, + <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>, + <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>; + }; }; }; diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h index ab8b8a737a0a..9cfcc3baa52c 100644 --- a/include/dt-bindings/clock/tegra210-car.h +++ b/include/dt-bindings/clock/tegra210-car.h @@ -307,7 +307,7 @@ #define TEGRA210_CLK_AUDIO4 275 #define TEGRA210_CLK_SPDIF 276 /* 277 */ -/* 278 */ +#define TEGRA210_CLK_QSPI_PM 278 /* 279 */ /* 280 */ #define TEGRA210_CLK_SOR0_LVDS 281 /* deprecated */ |