Merge branch 'net-marvell-yaml'

Michał Grzelak says:

====================
net: further improvements to marvell,pp2.yaml

This patchset addresses problems with reg ranges and
additional $refs. It also limits phy-mode and aligns examples.

Best regards,
Michał

---
Changelog:
v4->v5
- drop '+' from all patternProperties
- restrict range of patternProperties to [0-2] in top level
- drop the $ref in patternProperties:'^...':properties:reg
- add patternProperties:'^...':properties:reg:maximum:2
- drop $ref in patternProperties:'^...':properties:phys
- add patternProperties:'^...':properties:phys:maxItems:1
- limit phy-mode to the subset found in dts files
- reflect the order of subnodes' properties in subnodes' required:
- restrict range of pattern to [0-2] in marvell,armada-7k-pp22 case
- restrict range of pattern to [0-1] in marvell,armada-375-pp2 case
- align to 4 spaces all examples:
- add specified maximum to allOf:if:then-else:properties:reg

v3->v4
- change commit message of first patch
- move allOf:$ref to patternProperties:'^...':$ref
- deprecate port-id in favour of reg
- move reg to front of properties list in patternProperties
- reflect the order of properties in required list in
  patternProperties
- add unevaluatedProperties: false to patternProperties
- change unevaluated- to additionalProperties at top level
- add property phys: to ports subnode
- extend example binding with additional information about phys and sfp
- hook phys property to phy-consumer.yaml schema

v2->v3
- move 'reg:description' to 'allOf:if:then'
- change '#size-cells: true' and '#address-cells: true'
  to '#size-cells: const: 0' and '#address-cells: const: 1'
- replace all occurences of pattern "^eth\{hex_num}*"
  with "^(ethernet-)?port@[0-9]+$"
- add description in 'patternProperties:^...'
- add 'patternProperties:^...:interrupt-names:minItems: 1'
- add 'patternProperties:^...:reg:description'
- update 'patternProperties:^...:port-id:description'
- add 'patternProperties:^...:required: - reg'
- update '*:description:' to uppercase
- add 'allOf:then:required:marvell,system-controller'
- skip quotation marks from 'allOf:$ref'
- add 'else' schema to match 'allOf:if:then'
- restrict 'clocks' in 'allOf:if:then'
- restrict 'clock-names' in 'allOf:if:then'
- add #address-cells=<1>; #size-cells=<0>; in 'examples:'
- change every "ethX" to "ethernet-port@X" in 'examples:'
- add "reg" and comment in all ports in 'examples:'
- change /ethernet/eth0/phy-mode in examples://Armada-375
  to "rgmii-id"
- replace each cpm_ with cp0_ in 'examples:'
- replace each _syscon0 with _clk0 in 'examples:'
- remove each eth0X label in 'examples:'
- update armada-375.dtsi and armada-cp11x.dtsi to match
  marvell,pp2.yaml

v1->v2
- move 'properties' to the front of the file
- remove blank line after 'properties'
- move 'compatible' to the front of 'properties'
- move 'clocks', 'clock-names' and 'reg' definitions to 'properties'
- substitute all occurences of 'marvell,armada-7k-pp2' with
  'marvell,armada-7k-pp22'
- add properties:#size-cells and properties:#address-cells
- specify list in 'interrupt-names'
- remove blank lines after 'patternProperties'
- remove '^interrupt' and '^#.*-cells$' patterns
- remove blank line after 'allOf'
- remove first 'if-then-else' block from 'allOf'
- negate the condition in allOf:if schema
- delete 'interrupt-controller' from section 'examples'
- delete '#interrupt-cells' from section 'examples'
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 325 insertions, 152 deletions

diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
new file mode 100644
index 000000000000..4eadafc43d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
+
+maintainers:
+  - Marcin Wojtas <mw@semihalf.com>
+  - Russell King <linux@armlinux.org>
+
+description: |
+  Marvell Armada 375 Ethernet Controller (PPv2.1)
+  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+  Marvell CN913X Ethernet Controller (PPv2.3)
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-375-pp2
+      - marvell,armada-7k-pp22
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: main controller clock
+      - description: GOP clock
+      - description: MG clock
+      - description: MG Core clock
+      - description: AXI clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pp_clk
+      - const: gop_clk
+      - const: mg_clk
+      - const: mg_core_clk
+      - const: axi_clk
+
+  dma-coherent: true
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the system controller.
+
+patternProperties:
+  '^(ethernet-)?port@[0-2]$':
+    type: object
+    description: subnode for each ethernet port.
+    $ref: ethernet-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: ID of the port from the MAC point of view.
+        maximum: 2
+
+      interrupts:
+        minItems: 1
+        maxItems: 10
+        description: interrupt(s) for the port
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: hif0
+          - const: hif1
+          - const: hif2
+          - const: hif3
+          - const: hif4
+          - const: hif5
+          - const: hif6
+          - const: hif7
+          - const: hif8
+          - const: link
+
+        description: >
+          if more than a single interrupt for is given, must be the
+          name associated to the interrupts listed. Valid names are:
+          "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+          "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+          for backward compatibility but shouldn't be used for new
+          additions.
+
+      phys:
+        minItems: 1
+        maxItems: 2
+        description: >
+          Generic PHY, providing SerDes connectivity. For most modes,
+          one lane is sufficient, but some (e.g. RXAUI) may require two.
+
+      phy-mode:
+        enum:
+          - gmii
+          - sgmii
+          - rgmii-id
+          - 1000base-x
+          - 2500base-x
+          - 5gbase-r
+          - rxaui
+          - 10gbase-r
+
+      port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        deprecated: true
+        description: >
+          ID of the port from the MAC point of view.
+          Legacy binding for backward compatibility.
+
+      marvell,loopback:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: port is loopback mode.
+
+      gop-port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          only for marvell,armada-7k-pp22, ID of the port from the
+          GOP (Group Of Ports) point of view. This ID is used to index the
+          per-port registers in the second register area.
+
+    required:
+      - reg
+      - interrupts
+      - phy-mode
+      - port-id
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: marvell,armada-7k-pp22
+    then:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: Networking interfaces registers
+            - description: CM3 address space used for TX Flow Control
+
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+
+      patternProperties:
+        '^(ethernet-)?port@[0-2]$':
+          required:
+            - gop-port-id
+
+      required:
+        - marvell,system-controller
+    else:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: LMS registers
+            - description: Register area per eth0
+            - description: Register area per eth1
+
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+      patternProperties:
+        '^(ethernet-)?port@[0-1]$':
+          properties:
+            reg:
+              maximum: 1
+
+            gop-port-id: false
+
+additionalProperties: false
+
+examples:
+  - |
+    // For Armada 375 variant
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@f0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-375-pp2";
+        reg = <0xf0000 0xa000>,
+              <0xc0000 0x3060>,
+              <0xc4000 0x100>,
+              <0xc5000 0x100>;
+        clocks = <&gateclk 3>, <&gateclk 19>;
+        clock-names = "pp_clk", "gop_clk";
+
+        ethernet-port@0 {
+            interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            phy = <&phy0>;
+            phy-mode = "rgmii-id";
+        };
+
+        ethernet-port@1 {
+            interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            phy = <&phy3>;
+            phy-mode = "gmii";
+        };
+    };
+
+  - |
+    // For Armada 7k/8k and Cn913x variants
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-7k-pp22";
+        reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+        clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>,
+                 <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>;
+        clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
+        marvell,system-controller = <&cp0_syscon0>;
+
+        ethernet-port@0 {
+            interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "10gbase-r";
+            phys = <&cp0_comphy4 0>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            gop-port-id = <0>;
+        };
+
+        ethernet-port@1 {
+            interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "rgmii-id";
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            gop-port-id = <2>;
+        };
+
+        ethernet-port@2 {
+            interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "2500base-x";
+            managed = "in-band-status";
+            phys = <&cp0_comphy5 2>;
+            sfp = <&sfp_eth3>;
+            reg = <2>;
+            port-id = <2>; /* For backward compatibility. */
+            gop-port-id = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
deleted file mode 100644
index ce15c173f43f..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Marvell Armada 375 Ethernet Controller (PPv2.1)
-  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
-  Marvell CN913X Ethernet Controller (PPv2.3)
-
-Required properties:
-
-- compatible: should be one of:
-    "marvell,armada-375-pp2"
-    "marvell,armada-7k-pp2"
-- reg: addresses and length of the register sets for the device.
-  For "marvell,armada-375-pp2", must contain the following register
-  sets:
-	- common controller registers
-	- LMS registers
-	- one register area per Ethernet port
-  For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
-  sets:
-	- packet processor registers
-	- networking interfaces registers
-	- CM3 address space used for TX Flow Control
-
-- clocks: pointers to the reference clocks for this device, consequently:
-	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
-	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
-	- MG clock (only for armada-7k-pp2)
-	- MG Core clock (only for armada-7k-pp2)
-	- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
-  "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
-
-The ethernet ports are represented by subnodes. At least one port is
-required.
-
-Required properties (port):
-
-- interrupts: interrupt(s) for the port
-- port-id: ID of the port from the MAC point of view
-- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
-  GOP (Group Of Ports) point of view. This ID is used to index the
-  per-port registers in the second register area.
-- phy-mode: See ethernet.txt file in the same directory
-
-Optional properties (port):
-
-- marvell,loopback: port is loopback mode
-- phy: a phandle to a phy node defining the PHY address (as the reg
-  property, a single integer).
-- interrupt-names: if more than a single interrupt for is given, must be the
-                   name associated to the interrupts listed. Valid names are:
-                   "hifX", with X in [0..8], and "link". The names "tx-cpu0",
-                   "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
-                   for backward compatibility but shouldn't be used for new
-                   additions.
-- marvell,system-controller: a phandle to the system controller.
-
-Example for marvell,armada-375-pp2:
-
-ethernet@f0000 {
-	compatible = "marvell,armada-375-pp2";
-	reg = <0xf0000 0xa000>,
-	      <0xc0000 0x3060>,
-	      <0xc4000 0x100>,
-	      <0xc5000 0x100>;
-	clocks = <&gateclk 3>, <&gateclk 19>;
-	clock-names = "pp_clk", "gop_clk";
-
-	eth0: eth0@c4000 {
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		port-id = <0>;
-		phy = <&phy0>;
-		phy-mode = "gmii";
-	};
-
-	eth1: eth1@c5000 {
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		port-id = <1>;
-		phy = <&phy3>;
-		phy-mode = "gmii";
-	};
-};
-
-Example for marvell,armada-7k-pp2:
-
-cpm_ethernet: ethernet@0 {
-	compatible = "marvell,armada-7k-pp22";
-	reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
-		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
-	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-
-	eth0: eth0 {
-		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <0>;
-		gop-port-id = <0>;
-	};
-
-	eth1: eth1 {
-		interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <1>;
-		gop-port-id = <2>;
-	};
-
-	eth2: eth2 {
-		interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <2>;
-		gop-port-id = <3>;
-	};
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index a96c60c787af..5c6ce094e55e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12307,7 +12307,7 @@ M:	Marcin Wojtas <mw@semihalf.com>
 M:	Russell King <linux@armlinux.org.uk>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/marvell-pp2.txt
+F:	Documentation/devicetree/bindings/net/marvell,pp2.yaml
 F:	drivers/net/ethernet/marvell/mvpp2/
 
 MARVELL MWIFIEX WIRELESS DRIVER
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 929deaf312a5..9fbe0cfec48f 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -178,6 +178,8 @@
 
 			/* Network controller */
 			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -187,15 +189,17 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index d6c0990a267d..7d0043824f2a 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -58,6 +58,8 @@
 		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
 
 		CP11X_LABEL(ethernet): ethernet@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "marvell,armada-7k-pp22";
 			reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
 			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
@@ -69,7 +71,7 @@
 			status = "disabled";
 			dma-coherent;
 
-			CP11X_LABEL(eth0): eth0 {
+			CP11X_LABEL(eth0): ethernet-port@0 {
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
 					<43 IRQ_TYPE_LEVEL_HIGH>,
 					<47 IRQ_TYPE_LEVEL_HIGH>,
@@ -83,12 +85,13 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <0>;
+				reg = <0>;
+				port-id = <0>; /* For backward compatibility. */
 				gop-port-id = <0>;
 				status = "disabled";
 			};
 
-			CP11X_LABEL(eth1): eth1 {
+			CP11X_LABEL(eth1): ethernet-port@1 {
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
 					<44 IRQ_TYPE_LEVEL_HIGH>,
 					<48 IRQ_TYPE_LEVEL_HIGH>,
@@ -102,12 +105,13 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <1>;
+				reg = <1>;
+				port-id = <1>; /* For backward compatibility. */
 				gop-port-id = <2>;
 				status = "disabled";
 			};
 
-			CP11X_LABEL(eth2): eth2 {
+			CP11X_LABEL(eth2): ethernet-port@2 {
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
 					<45 IRQ_TYPE_LEVEL_HIGH>,
 					<49 IRQ_TYPE_LEVEL_HIGH>,
@@ -121,7 +125,8 @@
 				interrupt-names = "hif0", "hif1", "hif2",
 					"hif3", "hif4", "hif5", "hif6", "hif7",
 					"hif8", "link";
-				port-id = <2>;
+				reg = <2>;
+				port-id = <2>; /* For backward compatibility. */
 				gop-port-id = <3>;
 				status = "disabled";
 			};