Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "at91: dt for 3.20 #2" from Nicolas Ferre:

Second DT batch for 3.20:
- correct some pin configuration for at91sam9x5ek
- add pioD on sama5d4 following a modification of pinctrl driver
- add more precise nand compatibility string for sama5d4
- audio modifications for wm8904 or ac97

* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sam9263: Add ac97 device node
  dt: atmel_ac97c: Add device tree documentation
  ARM: at91: at91sam9n12ek/dt: use dt ids for wm8904
  ARM: at91: sama5d3xek/dt: use dt ids for wm8904
  ARM: at91: sama5d4: dts: change the nand compatible string
  ARM: at91/dt: sama5d4: add pioD controller
  ARM: at91/dt: disable pull-up on vbus-gpio (PB16) to reduce power consumption

Signed-off-by: Olof Johansson <olof@lixom.net>

6 files changed, 66 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/sound/atmel_ac97c.txt b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt
new file mode 100644
index 000000000000..b151bd902ce3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt
@@ -0,0 +1,20 @@
+* Atmel AC97 controller
+
+Required properties:
+  - compatible: "atmel,at91sam9263-ac97c"
+  - reg: Address and length of the register set for the device
+  - interrupts: Should contain AC97 interrupt
+  - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound@fffa0000 {
+       compatible = "atmel,at91sam9263-ac97c";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ac97>;
+       reg = <0xfffa0000 0x4000>;
+       interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+
+       ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 8a210d5033b1..d7e8a2420ad3 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -695,6 +695,16 @@
 					};
 				};
 
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -823,6 +833,17 @@
 				status = "disabled";
 			};
 
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&ac97_clk>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 13bb24ea971a..9575c0d895c9 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -54,7 +54,7 @@
 				status = "okay";
 
 				wm8904: codec@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 3a9f6fa4a36a..bd16bd360272 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -53,6 +53,8 @@
 			};
 
 			usb2: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_board_usb2>;
 				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -80,6 +82,13 @@
 							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
 					};
 				};
+
+				usb2 {
+					pinctrl_board_usb2: usb2-board {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 9fdb8a07b145..e6396b68b408 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -45,7 +45,7 @@
 			 */
 			i2c0: i2c@f0014000 {
 				wm8904: wm8904@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 1b4fe4e19721..5d6d0b3f5768 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -62,6 +62,7 @@
 		gpio0 = &pioA;
 		gpio1 = &pioB;
 		gpio2 = &pioC;
+		gpio3 = &pioD;
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
@@ -272,7 +273,7 @@
 		};
 
 		nand0: nand@80000000 {
-			compatible = "atmel,at91rm9200-nand";
+			compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1121,6 +1122,18 @@
 					clocks = <&pioC_clk>;
 				};
 
+				pioD: gpio@fc068000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc068000 0x100>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
+					status = "disabled";
+				};
+
 				pioE: gpio@fc06d000 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfc06d000 0x100>;