media: i2c: Drop unused mt9m032 camera sensor driver

The mt9m032 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.4. Drop it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

6 files changed, 0 insertions, 933 deletions

diff --git a/Documentation/admin-guide/media/i2c-cardlist.rst b/Documentation/admin-guide/media/i2c-cardlist.rst
index 26827f4b4a3d..6db642460e25 100644
--- a/Documentation/admin-guide/media/i2c-cardlist.rst
+++ b/Documentation/admin-guide/media/i2c-cardlist.rst
@@ -73,7 +73,6 @@ imx334        Sony IMX334 sensor
 imx355        Sony IMX355 sensor
 imx412        Sony IMX412 sensor
 mt9m001       mt9m001
-mt9m032       MT9M032 camera sensor
 mt9m111       mt9m111, mt9m112 and mt9m131
 mt9p031       Aptina MT9P031
 mt9t001       Aptina MT9T001
diff --git a/MAINTAINERS b/MAINTAINERS
index 0dfc8f3e4e2a..7f258cb5d54d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14168,14 +14168,6 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/docg3*
 
-MT9M032 APTINA SENSOR DRIVER
-M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-L:	linux-media@vger.kernel.org
-S:	Maintained
-T:	git git://linuxtv.org/media_tree.git
-F:	drivers/media/i2c/mt9m032.c
-F:	include/media/i2c/mt9m032.h
-
 MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 5be28ca5b5b2..7e5090a6a6b6 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -267,16 +267,6 @@ config VIDEO_MT9M001
 	  This driver supports MT9M001 cameras from Micron, monochrome
 	  and colour models.
 
-config VIDEO_MT9M032
-	tristate "MT9M032 camera sensor support"
-	depends on I2C && VIDEO_DEV
-	select MEDIA_CONTROLLER
-	select VIDEO_V4L2_SUBDEV_API
-	select VIDEO_APTINA_PLL
-	help
-	  This driver supports MT9M032 camera sensors from Aptina, monochrome
-	  models only.
-
 config VIDEO_MT9M111
 	tristate "mt9m111, mt9m112 and mt9m131 support"
 	depends on I2C && VIDEO_DEV
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index f739b639b429..18844982ab3d 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -60,7 +60,6 @@ obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
 obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
 obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
 obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
-obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
 obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
 obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
 obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o
diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c
deleted file mode 100644
index 958cfdd73d57..000000000000
--- a/drivers/media/i2c/mt9m032.c
+++ /dev/null
@@ -1,891 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for MT9M032 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2010-2011 Lund Engineering
- * Contact: Gil Lund <gwlund@lundeng.com>
- * Author: Martin Hostettler <martin@neutronstar.dyndns.org>
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/math64.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/v4l2-mediabus.h>
-
-#include <media/media-entity.h>
-#include <media/i2c/mt9m032.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "aptina-pll.h"
-
-/*
- * width and height include active boundary and black parts
- *
- * column    0-  15 active boundary
- * column   16-1455 image
- * column 1456-1471 active boundary
- * column 1472-1599 black
- *
- * row       0-  51 black
- * row      53-  59 active boundary
- * row      60-1139 image
- * row    1140-1147 active boundary
- * row    1148-1151 black
- */
-
-#define MT9M032_PIXEL_ARRAY_WIDTH			1600
-#define MT9M032_PIXEL_ARRAY_HEIGHT			1152
-
-#define MT9M032_CHIP_VERSION				0x00
-#define		MT9M032_CHIP_VERSION_VALUE		0x1402
-#define MT9M032_ROW_START				0x01
-#define		MT9M032_ROW_START_MIN			0
-#define		MT9M032_ROW_START_MAX			1152
-#define		MT9M032_ROW_START_DEF			60
-#define MT9M032_COLUMN_START				0x02
-#define		MT9M032_COLUMN_START_MIN		0
-#define		MT9M032_COLUMN_START_MAX		1600
-#define		MT9M032_COLUMN_START_DEF		16
-#define MT9M032_ROW_SIZE				0x03
-#define		MT9M032_ROW_SIZE_MIN			32
-#define		MT9M032_ROW_SIZE_MAX			1152
-#define		MT9M032_ROW_SIZE_DEF			1080
-#define MT9M032_COLUMN_SIZE				0x04
-#define		MT9M032_COLUMN_SIZE_MIN			32
-#define		MT9M032_COLUMN_SIZE_MAX			1600
-#define		MT9M032_COLUMN_SIZE_DEF			1440
-#define MT9M032_HBLANK					0x05
-#define MT9M032_VBLANK					0x06
-#define		MT9M032_VBLANK_MAX			0x7ff
-#define MT9M032_SHUTTER_WIDTH_HIGH			0x08
-#define MT9M032_SHUTTER_WIDTH_LOW			0x09
-#define		MT9M032_SHUTTER_WIDTH_MIN		1
-#define		MT9M032_SHUTTER_WIDTH_MAX		1048575
-#define		MT9M032_SHUTTER_WIDTH_DEF		1943
-#define MT9M032_PIX_CLK_CTRL				0x0a
-#define		MT9M032_PIX_CLK_CTRL_INV_PIXCLK		0x8000
-#define MT9M032_RESTART					0x0b
-#define MT9M032_RESET					0x0d
-#define MT9M032_PLL_CONFIG1				0x11
-#define		MT9M032_PLL_CONFIG1_PREDIV_MASK		0x3f
-#define		MT9M032_PLL_CONFIG1_MUL_SHIFT		8
-#define MT9M032_READ_MODE1				0x1e
-#define		MT9M032_READ_MODE1_OUTPUT_BAD_FRAMES	(1 << 13)
-#define		MT9M032_READ_MODE1_MAINTAIN_FRAME_RATE	(1 << 12)
-#define		MT9M032_READ_MODE1_XOR_LINE_VALID	(1 << 11)
-#define		MT9M032_READ_MODE1_CONT_LINE_VALID	(1 << 10)
-#define		MT9M032_READ_MODE1_INVERT_TRIGGER	(1 << 9)
-#define		MT9M032_READ_MODE1_SNAPSHOT		(1 << 8)
-#define		MT9M032_READ_MODE1_GLOBAL_RESET		(1 << 7)
-#define		MT9M032_READ_MODE1_BULB_EXPOSURE	(1 << 6)
-#define		MT9M032_READ_MODE1_INVERT_STROBE	(1 << 5)
-#define		MT9M032_READ_MODE1_STROBE_ENABLE	(1 << 4)
-#define		MT9M032_READ_MODE1_STROBE_START_TRIG1	(0 << 2)
-#define		MT9M032_READ_MODE1_STROBE_START_EXP	(1 << 2)
-#define		MT9M032_READ_MODE1_STROBE_START_SHUTTER	(2 << 2)
-#define		MT9M032_READ_MODE1_STROBE_START_TRIG2	(3 << 2)
-#define		MT9M032_READ_MODE1_STROBE_END_TRIG1	(0 << 0)
-#define		MT9M032_READ_MODE1_STROBE_END_EXP	(1 << 0)
-#define		MT9M032_READ_MODE1_STROBE_END_SHUTTER	(2 << 0)
-#define		MT9M032_READ_MODE1_STROBE_END_TRIG2	(3 << 0)
-#define MT9M032_READ_MODE2				0x20
-#define		MT9M032_READ_MODE2_VFLIP_SHIFT		15
-#define		MT9M032_READ_MODE2_HFLIP_SHIFT		14
-#define		MT9M032_READ_MODE2_ROW_BLC		0x40
-#define MT9M032_GAIN_GREEN1				0x2b
-#define MT9M032_GAIN_BLUE				0x2c
-#define MT9M032_GAIN_RED				0x2d
-#define MT9M032_GAIN_GREEN2				0x2e
-
-/* write only */
-#define MT9M032_GAIN_ALL				0x35
-#define		MT9M032_GAIN_DIGITAL_MASK		0x7f
-#define		MT9M032_GAIN_DIGITAL_SHIFT		8
-#define		MT9M032_GAIN_AMUL_SHIFT			6
-#define		MT9M032_GAIN_ANALOG_MASK		0x3f
-#define MT9M032_FORMATTER1				0x9e
-#define		MT9M032_FORMATTER1_PLL_P1_6		(1 << 8)
-#define		MT9M032_FORMATTER1_PARALLEL		(1 << 12)
-#define MT9M032_FORMATTER2				0x9f
-#define		MT9M032_FORMATTER2_DOUT_EN		0x1000
-#define		MT9M032_FORMATTER2_PIXCLK_EN		0x2000
-
-/*
- * The available MT9M032 datasheet is missing documentation for register 0x10
- * MT9P031 seems to be close enough, so use constants from that datasheet for
- * now.
- * But keep the name MT9P031 to remind us, that this isn't really confirmed
- * for this sensor.
- */
-#define MT9P031_PLL_CONTROL				0x10
-#define		MT9P031_PLL_CONTROL_PWROFF		0x0050
-#define		MT9P031_PLL_CONTROL_PWRON		0x0051
-#define		MT9P031_PLL_CONTROL_USEPLL		0x0052
-
-struct mt9m032 {
-	struct v4l2_subdev subdev;
-	struct media_pad pad;
-	struct mt9m032_platform_data *pdata;
-
-	unsigned int pix_clock;
-
-	struct v4l2_ctrl_handler ctrls;
-	struct {
-		struct v4l2_ctrl *hflip;
-		struct v4l2_ctrl *vflip;
-	};
-
-	struct mutex lock; /* Protects streaming, format, interval and crop */
-
-	bool streaming;
-
-	struct v4l2_mbus_framefmt format;
-	struct v4l2_rect crop;
-	struct v4l2_fract frame_interval;
-};
-
-#define to_mt9m032(sd)	container_of(sd, struct mt9m032, subdev)
-#define to_dev(sensor) \
-	(&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev)
-
-static int mt9m032_read(struct i2c_client *client, u8 reg)
-{
-	return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data)
-{
-	return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width)
-{
-	unsigned int effective_width;
-	u32 ns;
-
-	effective_width = width + 716; /* empirical value */
-	ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock);
-	dev_dbg(to_dev(sensor),	"MT9M032 line time: %u ns\n", ns);
-	return ns;
-}
-
-static int mt9m032_update_timing(struct mt9m032 *sensor,
-				 struct v4l2_fract *interval)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	struct v4l2_rect *crop = &sensor->crop;
-	unsigned int min_vblank;
-	unsigned int vblank;
-	u32 row_time;
-
-	if (!interval)
-		interval = &sensor->frame_interval;
-
-	row_time = mt9m032_row_time(sensor, crop->width);
-
-	vblank = div_u64(1000000000ULL * interval->numerator,
-			 (u64)row_time * interval->denominator)
-	       - crop->height;
-
-	if (vblank > MT9M032_VBLANK_MAX) {
-		/* hardware limits to 11 bit values */
-		interval->denominator = 1000;
-		interval->numerator =
-			div_u64((crop->height + MT9M032_VBLANK_MAX) *
-				(u64)row_time * interval->denominator,
-				1000000000ULL);
-		vblank = div_u64(1000000000ULL * interval->numerator,
-				 (u64)row_time * interval->denominator)
-		       - crop->height;
-	}
-	/* enforce minimal 1.6ms blanking time. */
-	min_vblank = 1600000 / row_time;
-	vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX);
-
-	return mt9m032_write(client, MT9M032_VBLANK, vblank);
-}
-
-static int mt9m032_update_geom_timing(struct mt9m032 *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int ret;
-
-	ret = mt9m032_write(client, MT9M032_COLUMN_SIZE,
-			    sensor->crop.width - 1);
-	if (!ret)
-		ret = mt9m032_write(client, MT9M032_ROW_SIZE,
-				    sensor->crop.height - 1);
-	if (!ret)
-		ret = mt9m032_write(client, MT9M032_COLUMN_START,
-				    sensor->crop.left);
-	if (!ret)
-		ret = mt9m032_write(client, MT9M032_ROW_START,
-				    sensor->crop.top);
-	if (!ret)
-		ret = mt9m032_update_timing(sensor, NULL);
-	return ret;
-}
-
-static int update_formatter2(struct mt9m032 *sensor, bool streaming)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	u16 reg_val =   MT9M032_FORMATTER2_DOUT_EN
-		      | 0x0070;  /* parts reserved! */
-				 /* possibly for changing to 14-bit mode */
-
-	if (streaming)
-		reg_val |= MT9M032_FORMATTER2_PIXCLK_EN;   /* pixclock enable */
-
-	return mt9m032_write(client, MT9M032_FORMATTER2, reg_val);
-}
-
-static int mt9m032_setup_pll(struct mt9m032 *sensor)
-{
-	static const struct aptina_pll_limits limits = {
-		.ext_clock_min = 8000000,
-		.ext_clock_max = 16500000,
-		.int_clock_min = 2000000,
-		.int_clock_max = 24000000,
-		.out_clock_min = 322000000,
-		.out_clock_max = 693000000,
-		.pix_clock_max = 99000000,
-		.n_min = 1,
-		.n_max = 64,
-		.m_min = 16,
-		.m_max = 255,
-		.p1_min = 6,
-		.p1_max = 7,
-	};
-
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	struct mt9m032_platform_data *pdata = sensor->pdata;
-	struct aptina_pll pll;
-	u16 reg_val;
-	int ret;
-
-	pll.ext_clock = pdata->ext_clock;
-	pll.pix_clock = pdata->pix_clock;
-
-	ret = aptina_pll_calculate(&client->dev, &limits, &pll);
-	if (ret < 0)
-		return ret;
-
-	sensor->pix_clock = pdata->pix_clock;
-
-	ret = mt9m032_write(client, MT9M032_PLL_CONFIG1,
-			    (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) |
-			    ((pll.n - 1) & MT9M032_PLL_CONFIG1_PREDIV_MASK));
-	if (!ret)
-		ret = mt9m032_write(client, MT9P031_PLL_CONTROL,
-				    MT9P031_PLL_CONTROL_PWRON |
-				    MT9P031_PLL_CONTROL_USEPLL);
-	if (!ret)		/* more reserved, Continuous, Master Mode */
-		ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8000 |
-				    MT9M032_READ_MODE1_STROBE_START_EXP |
-				    MT9M032_READ_MODE1_STROBE_END_SHUTTER);
-	if (!ret) {
-		reg_val = (pll.p1 == 6 ? MT9M032_FORMATTER1_PLL_P1_6 : 0)
-			| MT9M032_FORMATTER1_PARALLEL | 0x001e; /* 14-bit */
-		ret = mt9m032_write(client, MT9M032_FORMATTER1, reg_val);
-	}
-
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * Subdev pad operations
- */
-
-static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_state *sd_state,
-				  struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (code->index != 0)
-		return -EINVAL;
-
-	code->code = MEDIA_BUS_FMT_Y8_1X8;
-	return 0;
-}
-
-static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev,
-				   struct v4l2_subdev_state *sd_state,
-				   struct v4l2_subdev_frame_size_enum *fse)
-{
-	if (fse->index != 0 || fse->code != MEDIA_BUS_FMT_Y8_1X8)
-		return -EINVAL;
-
-	fse->min_width = MT9M032_COLUMN_SIZE_DEF;
-	fse->max_width = MT9M032_COLUMN_SIZE_DEF;
-	fse->min_height = MT9M032_ROW_SIZE_DEF;
-	fse->max_height = MT9M032_ROW_SIZE_DEF;
-
-	return 0;
-}
-
-/**
- * __mt9m032_get_pad_crop() - get crop rect
- * @sensor: pointer to the sensor struct
- * @sd_state: v4l2_subdev_state for getting the try crop rect from
- * @which: select try or active crop rect
- *
- * Returns a pointer the current active or fh relative try crop rect
- */
-static struct v4l2_rect *
-__mt9m032_get_pad_crop(struct mt9m032 *sensor,
-		       struct v4l2_subdev_state *sd_state,
-		       enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_crop(&sensor->subdev, sd_state, 0);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &sensor->crop;
-	default:
-		return NULL;
-	}
-}
-
-/**
- * __mt9m032_get_pad_format() - get format
- * @sensor: pointer to the sensor struct
- * @sd_state: v4l2_subdev_state for getting the try format from
- * @which: select try or active format
- *
- * Returns a pointer the current active or fh relative try format
- */
-static struct v4l2_mbus_framefmt *
-__mt9m032_get_pad_format(struct mt9m032 *sensor,
-			 struct v4l2_subdev_state *sd_state,
-			 enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_format(&sensor->subdev, sd_state,
-						  0);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &sensor->format;
-	default:
-		return NULL;
-	}
-}
-
-static int mt9m032_get_pad_format(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_state *sd_state,
-				  struct v4l2_subdev_format *fmt)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	mutex_lock(&sensor->lock);
-	fmt->format = *__mt9m032_get_pad_format(sensor, sd_state, fmt->which);
-	mutex_unlock(&sensor->lock);
-
-	return 0;
-}
-
-static int mt9m032_set_pad_format(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_state *sd_state,
-				  struct v4l2_subdev_format *fmt)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	int ret;
-
-	mutex_lock(&sensor->lock);
-
-	if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	/* Scaling is not supported, the format is thus fixed. */
-	fmt->format = *__mt9m032_get_pad_format(sensor, sd_state, fmt->which);
-	ret = 0;
-
-done:
-	mutex_unlock(&sensor->lock);
-	return ret;
-}
-
-static int mt9m032_get_pad_selection(struct v4l2_subdev *subdev,
-				     struct v4l2_subdev_state *sd_state,
-				     struct v4l2_subdev_selection *sel)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	if (sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	mutex_lock(&sensor->lock);
-	sel->r = *__mt9m032_get_pad_crop(sensor, sd_state, sel->which);
-	mutex_unlock(&sensor->lock);
-
-	return 0;
-}
-
-static int mt9m032_set_pad_selection(struct v4l2_subdev *subdev,
-				     struct v4l2_subdev_state *sd_state,
-				     struct v4l2_subdev_selection *sel)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *__crop;
-	struct v4l2_rect rect;
-	int ret = 0;
-
-	if (sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	mutex_lock(&sensor->lock);
-
-	if (sensor->streaming && sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	/* Clamp the crop rectangle boundaries and align them to a multiple of 2
-	 * pixels to ensure a GRBG Bayer pattern.
-	 */
-	rect.left = clamp(ALIGN(sel->r.left, 2), MT9M032_COLUMN_START_MIN,
-			  MT9M032_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(sel->r.top, 2), MT9M032_ROW_START_MIN,
-			 MT9M032_ROW_START_MAX);
-	rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2),
-			     MT9M032_COLUMN_SIZE_MIN, MT9M032_COLUMN_SIZE_MAX);
-	rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
-			      MT9M032_ROW_SIZE_MIN, MT9M032_ROW_SIZE_MAX);
-
-	rect.width = min_t(unsigned int, rect.width,
-			   MT9M032_PIXEL_ARRAY_WIDTH - rect.left);
-	rect.height = min_t(unsigned int, rect.height,
-			    MT9M032_PIXEL_ARRAY_HEIGHT - rect.top);
-
-	__crop = __mt9m032_get_pad_crop(sensor, sd_state, sel->which);
-
-	if (rect.width != __crop->width || rect.height != __crop->height) {
-		/* Reset the output image size if the crop rectangle size has
-		 * been modified.
-		 */
-		format = __mt9m032_get_pad_format(sensor, sd_state,
-						  sel->which);
-		format->width = rect.width;
-		format->height = rect.height;
-	}
-
-	*__crop = rect;
-	sel->r = rect;
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		ret = mt9m032_update_geom_timing(sensor);
-
-done:
-	mutex_unlock(&sensor->lock);
-	return ret;
-}
-
-static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev,
-				      struct v4l2_subdev_frame_interval *fi)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	mutex_lock(&sensor->lock);
-	memset(fi, 0, sizeof(*fi));
-	fi->interval = sensor->frame_interval;
-	mutex_unlock(&sensor->lock);
-
-	return 0;
-}
-
-static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev,
-				      struct v4l2_subdev_frame_interval *fi)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	int ret;
-
-	mutex_lock(&sensor->lock);
-
-	if (sensor->streaming) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	/* Avoid divisions by 0. */
-	if (fi->interval.denominator == 0)
-		fi->interval.denominator = 1;
-
-	ret = mt9m032_update_timing(sensor, &fi->interval);
-	if (!ret)
-		sensor->frame_interval = fi->interval;
-
-done:
-	mutex_unlock(&sensor->lock);
-	return ret;
-}
-
-static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	int ret;
-
-	mutex_lock(&sensor->lock);
-	ret = update_formatter2(sensor, streaming);
-	if (!ret)
-		sensor->streaming = streaming;
-	mutex_unlock(&sensor->lock);
-
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9m032_g_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct mt9m032 *sensor = to_mt9m032(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int val;
-
-	if (reg->reg > 0xff)
-		return -EINVAL;
-
-	val = mt9m032_read(client, reg->reg);
-	if (val < 0)
-		return -EIO;
-
-	reg->size = 2;
-	reg->val = val;
-
-	return 0;
-}
-
-static int mt9m032_s_register(struct v4l2_subdev *sd,
-			      const struct v4l2_dbg_register *reg)
-{
-	struct mt9m032 *sensor = to_mt9m032(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-
-	if (reg->reg > 0xff)
-		return -EINVAL;
-
-	return mt9m032_write(client, reg->reg, reg->val);
-}
-#endif
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev control operations
- */
-
-static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT)
-		    | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT)
-		    | MT9M032_READ_MODE2_ROW_BLC
-		    | 0x0007;
-
-	return mt9m032_write(client, MT9M032_READ_MODE2, reg_val);
-}
-
-static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int digital_gain_val;	/* in 1/8th (0..127) */
-	int analog_mul;		/* 0 or 1 */
-	int analog_gain_val;	/* in 1/16th. (0..63) */
-	u16 reg_val;
-
-	digital_gain_val = 51; /* from setup example */
-
-	if (val < 63) {
-		analog_mul = 0;
-		analog_gain_val = val;
-	} else {
-		analog_mul = 1;
-		analog_gain_val = val / 2;
-	}
-
-	/* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */
-	/* overall_gain = a_gain * (1 + digital_gain_val / 8) */
-
-	reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK)
-		   << MT9M032_GAIN_DIGITAL_SHIFT)
-		| ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT)
-		| (analog_gain_val & MT9M032_GAIN_ANALOG_MASK);
-
-	return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val);
-}
-
-static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl)
-{
-	if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) {
-		/* round because of multiplier used for values >= 63 */
-		ctrl->val &= ~1;
-	}
-
-	return 0;
-}
-
-static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mt9m032 *sensor =
-		container_of(ctrl->handler, struct mt9m032, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int ret;
-
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		return mt9m032_set_gain(sensor, ctrl->val);
-
-	case V4L2_CID_HFLIP:
-	/* case V4L2_CID_VFLIP: -- In the same cluster */
-		return update_read_mode2(sensor, sensor->vflip->val,
-					 sensor->hflip->val);
-
-	case V4L2_CID_EXPOSURE:
-		ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH,
-				    (ctrl->val >> 16) & 0xffff);
-		if (ret < 0)
-			return ret;
-
-		return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW,
-				     ctrl->val & 0xffff);
-	}
-
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops mt9m032_ctrl_ops = {
-	.s_ctrl = mt9m032_set_ctrl,
-	.try_ctrl = mt9m032_try_ctrl,
-};
-
-/* -------------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops mt9m032_core_ops = {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = mt9m032_g_register,
-	.s_register = mt9m032_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops mt9m032_video_ops = {
-	.s_stream = mt9m032_s_stream,
-	.g_frame_interval = mt9m032_get_frame_interval,
-	.s_frame_interval = mt9m032_set_frame_interval,
-};
-
-static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = {
-	.enum_mbus_code = mt9m032_enum_mbus_code,
-	.enum_frame_size = mt9m032_enum_frame_size,
-	.get_fmt = mt9m032_get_pad_format,
-	.set_fmt = mt9m032_set_pad_format,
-	.set_selection = mt9m032_set_pad_selection,
-	.get_selection = mt9m032_get_pad_selection,
-};
-
-static const struct v4l2_subdev_ops mt9m032_ops = {
-	.core = &mt9m032_core_ops,
-	.video = &mt9m032_video_ops,
-	.pad = &mt9m032_pad_ops,
-};
-
-/* -----------------------------------------------------------------------------
- * Driver initialization and probing
- */
-
-static int mt9m032_probe(struct i2c_client *client)
-{
-	struct mt9m032_platform_data *pdata = client->dev.platform_data;
-	struct i2c_adapter *adapter = client->adapter;
-	struct mt9m032 *sensor;
-	int chip_version;
-	int ret;
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_warn(&client->dev,
-			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	if (!client->dev.platform_data)
-		return -ENODEV;
-
-	sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
-	if (sensor == NULL)
-		return -ENOMEM;
-
-	mutex_init(&sensor->lock);
-
-	sensor->pdata = pdata;
-
-	v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops);
-	sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
-	if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
-		dev_err(&client->dev, "MT9M032 not detected, wrong version "
-			"0x%04x\n", chip_version);
-		ret = -ENODEV;
-		goto error_sensor;
-	}
-
-	dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n",
-		 client->addr);
-
-	sensor->frame_interval.numerator = 1;
-	sensor->frame_interval.denominator = 30;
-
-	sensor->crop.left = MT9M032_COLUMN_START_DEF;
-	sensor->crop.top = MT9M032_ROW_START_DEF;
-	sensor->crop.width = MT9M032_COLUMN_SIZE_DEF;
-	sensor->crop.height = MT9M032_ROW_SIZE_DEF;
-
-	sensor->format.width = sensor->crop.width;
-	sensor->format.height = sensor->crop.height;
-	sensor->format.code = MEDIA_BUS_FMT_Y8_1X8;
-	sensor->format.field = V4L2_FIELD_NONE;
-	sensor->format.colorspace = V4L2_COLORSPACE_SRGB;
-
-	v4l2_ctrl_handler_init(&sensor->ctrls, 5);
-
-	v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
-			  V4L2_CID_GAIN, 0, 127, 1, 64);
-
-	sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls,
-					  &mt9m032_ctrl_ops,
-					  V4L2_CID_HFLIP, 0, 1, 1, 0);
-	sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls,
-					  &mt9m032_ctrl_ops,
-					  V4L2_CID_VFLIP, 0, 1, 1, 0);
-
-	v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
-			  V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN,
-			  MT9M032_SHUTTER_WIDTH_MAX, 1,
-			  MT9M032_SHUTTER_WIDTH_DEF);
-	v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
-			  V4L2_CID_PIXEL_RATE, pdata->pix_clock,
-			  pdata->pix_clock, 1, pdata->pix_clock);
-
-	if (sensor->ctrls.error) {
-		ret = sensor->ctrls.error;
-		dev_err(&client->dev, "control initialization error %d\n", ret);
-		goto error_ctrl;
-	}
-
-	v4l2_ctrl_cluster(2, &sensor->hflip);
-
-	sensor->subdev.ctrl_handler = &sensor->ctrls;
-	sensor->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
-	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad);
-	if (ret < 0)
-		goto error_ctrl;
-
-	ret = mt9m032_write(client, MT9M032_RESET, 1);	/* reset on */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, MT9M032_RESET, 0);	/* reset off */
-	if (ret < 0)
-		goto error_entity;
-
-	ret = mt9m032_setup_pll(sensor);
-	if (ret < 0)
-		goto error_entity;
-	usleep_range(10000, 11000);
-
-	ret = v4l2_ctrl_handler_setup(&sensor->ctrls);
-	if (ret < 0)
-		goto error_entity;
-
-	/* SIZE */
-	ret = mt9m032_update_geom_timing(sensor);
-	if (ret < 0)
-		goto error_entity;
-
-	ret = mt9m032_write(client, 0x41, 0x0000);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, 0x42, 0x0003);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, 0x43, 0x0003);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, 0x7f, 0x0000);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	if (sensor->pdata->invert_pixclock) {
-		ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL,
-				    MT9M032_PIX_CLK_CTRL_INV_PIXCLK);
-		if (ret < 0)
-			goto error_entity;
-	}
-
-	ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */
-	if (ret < 0)
-		goto error_entity;
-	msleep(100);
-	ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */
-	if (ret < 0)
-		goto error_entity;
-	msleep(100);
-	ret = update_formatter2(sensor, false);
-	if (ret < 0)
-		goto error_entity;
-
-	return ret;
-
-error_entity:
-	media_entity_cleanup(&sensor->subdev.entity);
-error_ctrl:
-	v4l2_ctrl_handler_free(&sensor->ctrls);
-error_sensor:
-	mutex_destroy(&sensor->lock);
-	return ret;
-}
-
-static void mt9m032_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	v4l2_device_unregister_subdev(subdev);
-	v4l2_ctrl_handler_free(&sensor->ctrls);
-	media_entity_cleanup(&subdev->entity);
-	mutex_destroy(&sensor->lock);
-}
-
-static const struct i2c_device_id mt9m032_id_table[] = {
-	{ MT9M032_NAME, 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(i2c, mt9m032_id_table);
-
-static struct i2c_driver mt9m032_i2c_driver = {
-	.driver = {
-		.name = MT9M032_NAME,
-	},
-	.probe_new = mt9m032_probe,
-	.remove = mt9m032_remove,
-	.id_table = mt9m032_id_table,
-};
-
-module_i2c_driver(mt9m032_i2c_driver);
-
-MODULE_AUTHOR("Martin Hostettler <martin@neutronstar.dyndns.org>");
-MODULE_DESCRIPTION("MT9M032 camera sensor driver");
-MODULE_LICENSE("GPL v2");
diff --git a/include/media/i2c/mt9m032.h b/include/media/i2c/mt9m032.h
deleted file mode 100644
index 1bd58757717a..000000000000
--- a/include/media/i2c/mt9m032.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Driver for MT9M032 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2010-2011 Lund Engineering
- * Contact: Gil Lund <gwlund@lundeng.com>
- * Author: Martin Hostettler <martin@neutronstar.dyndns.org>
- */
-
-#ifndef MT9M032_H
-#define MT9M032_H
-
-#define MT9M032_NAME		"mt9m032"
-#define MT9M032_I2C_ADDR	(0xb8 >> 1)
-
-struct mt9m032_platform_data {
-	u32 ext_clock;
-	u32 pix_clock;
-	bool invert_pixclock;
-
-};
-#endif /* MT9M032_H */