diff options
| author |   Russell King (Oracle) <rmk+kernel@armlinux.org.uk> | 2025-06-16 22:06:32 +0100 |
|---|---|---|
| committer |   Jakub Kicinski <kuba@kernel.org> | 2025-06-17 16:25:20 -0700 |
| commit | d54d42a41b65d79ac4aacfbe1b3374eec217ceb4 (patch) | |
| tree | 1a3e52280ae91c44e19299281d03a402d9a3f4d8 | |
| parent | net: stmmac: visconti: clean up code formatting (diff) | |
| download | wireguard-linux-d54d42a41b65d79ac4aacfbe1b3374eec217ceb4.tar.xz wireguard-linux-d54d42a41b65d79ac4aacfbe1b3374eec217ceb4.zip | |
net: stmmac: visconti: make phy_intf_sel local
There is little need to have phy_intf_sel as a member of struct
visconti_eth when we have the PHY interface mode available from
phylink in visconti_eth_set_clk_tx_rate(). Without multiple
interface support, phylink is fixed to supporting only
plat->phy_interface, so we can be sure that "interface" passed
into this function is the same as plat->phy_interface.
Make phy_intf_sel local to visconti_eth_init_hw() and clean up.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH2G-004UyY-GD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c | 23 |
1 files changed, 11 insertions, 12 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c index db82b522c248..bd65d4239054 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c @@ -48,7 +48,6 @@ struct visconti_eth { void __iomem *reg; - u32 phy_intf_sel; struct clk *phy_ref_clk; struct device *dev; }; @@ -57,9 +56,9 @@ static int visconti_eth_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i, phy_interface_t interface, int speed) { struct visconti_eth *dwmac = bsp_priv; - unsigned int val, clk_sel = 0; + unsigned long clk_sel, val; - if (dwmac->phy_intf_sel == ETHER_CONFIG_INTF_RGMII) { + if (phy_interface_mode_is_rgmii(interface)) { switch (speed) { case SPEED_1000: clk_sel = ETHER_CLK_SEL_FREQ_SEL_125M; @@ -93,7 +92,7 @@ static int visconti_eth_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i, val &= ~ETHER_CLK_SEL_TX_O_E_N_IN; writel(val, dwmac->reg + REG_ETHER_CLOCK_SEL); - } else if (dwmac->phy_intf_sel == ETHER_CONFIG_INTF_RMII) { + } else if (interface == PHY_INTERFACE_MODE_RMII) { switch (speed) { case SPEED_100: clk_sel = ETHER_CLK_SEL_DIV_SEL_2; @@ -150,28 +149,28 @@ static int visconti_eth_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i, static int visconti_eth_init_hw(struct platform_device *pdev, struct plat_stmmacenet_data *plat_dat) { struct visconti_eth *dwmac = plat_dat->bsp_priv; - unsigned int reg_val, clk_sel_val; + unsigned int clk_sel_val; + u32 phy_intf_sel; switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: - dwmac->phy_intf_sel = ETHER_CONFIG_INTF_RGMII; + phy_intf_sel = ETHER_CONFIG_INTF_RGMII; break; case PHY_INTERFACE_MODE_MII: - dwmac->phy_intf_sel = ETHER_CONFIG_INTF_MII; + phy_intf_sel = ETHER_CONFIG_INTF_MII; break; case PHY_INTERFACE_MODE_RMII: - dwmac->phy_intf_sel = ETHER_CONFIG_INTF_RMII; + phy_intf_sel = ETHER_CONFIG_INTF_RMII; break; default: dev_err(&pdev->dev, "Unsupported phy-mode (%d)\n", plat_dat->phy_interface); return -EOPNOTSUPP; } - reg_val = dwmac->phy_intf_sel; - writel(reg_val, dwmac->reg + REG_ETHER_CONTROL); + writel(phy_intf_sel, dwmac->reg + REG_ETHER_CONTROL); /* Enable TX/RX clock */ clk_sel_val = ETHER_CLK_SEL_FREQ_SEL_125M; @@ -181,8 +180,8 @@ static int visconti_eth_init_hw(struct platform_device *pdev, struct plat_stmmac dwmac->reg + REG_ETHER_CLOCK_SEL); /* release internal-reset */ - reg_val |= ETHER_ETH_CONTROL_RESET; - writel(reg_val, dwmac->reg + REG_ETHER_CONTROL); + phy_intf_sel |= ETHER_ETH_CONTROL_RESET; + writel(phy_intf_sel, dwmac->reg + REG_ETHER_CONTROL); return 0; } |