docs: networking: device drivers: convert ti/tlan.txt to ReST

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 49 insertions, 25 deletions

diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst
index 1d3b664e6921..adc0bf65fb02 100644
--- a/Documentation/networking/device_drivers/index.rst
+++ b/Documentation/networking/device_drivers/index.rst
@@ -49,6 +49,7 @@ Contents:
    smsc/smc9
    ti/cpsw_switchdev
    ti/cpsw
+   ti/tlan
 
 .. only::  subproject and html
 
diff --git a/Documentation/networking/device_drivers/ti/tlan.txt b/Documentation/networking/device_drivers/ti/tlan.rst
index 34550dfcef74..4fdc0907f4fc 100644
--- a/Documentation/networking/device_drivers/ti/tlan.txt
+++ b/Documentation/networking/device_drivers/ti/tlan.rst
@@ -1,20 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+TLAN driver for Linux
+=====================
+
+:Version: 1.14a
+
 (C) 1997-1998 Caldera, Inc.
+
 (C) 1998 James Banks
+
 (C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com>
 
 For driver information/updates visit http://www.compaq.com
 
 
-TLAN driver for Linux, version 1.14a
-README
 
 
-I.  Supported Devices.
+
+I. Supported Devices
+====================
 
     Only PCI devices will work with this driver.
 
     Supported:
+
+    =========	=========	===========================================
     Vendor ID	Device ID	Name
+    =========	=========	===========================================
     0e11	ae32		Compaq Netelligent 10/100 TX PCI UTP
     0e11	ae34		Compaq Netelligent 10 T PCI UTP
     0e11	ae35		Compaq Integrated NetFlex 3/P
@@ -25,13 +38,14 @@ I.  Supported Devices.
     0e11	b030		Compaq Netelligent 10/100 TX UTP
     0e11	f130		Compaq NetFlex 3/P
     0e11	f150		Compaq NetFlex 3/P
-    108d	0012		Olicom OC-2325	
+    108d	0012		Olicom OC-2325
     108d	0013		Olicom OC-2183
-    108d	0014		Olicom OC-2326	
+    108d	0014		Olicom OC-2326
+    =========	=========	===========================================
 
 
     Caveats:
-    
+
     I am not sure if 100BaseTX daughterboards (for those cards which
     support such things) will work.  I haven't had any solid evidence
     either way.
@@ -41,21 +55,25 @@ I.  Supported Devices.
 
     The "Netelligent 10 T/2 PCI UTP/Coax" (b012) device is untested,
     but I do not expect any problems.
-    
 
-II.   Driver Options
+
+II. Driver Options
+==================
+
 	1. You can append debug=x to the end of the insmod line to get
-           debug messages, where x is a bit field where the bits mean
+	   debug messages, where x is a bit field where the bits mean
 	   the following:
-	   
+
+	   ====		=====================================
 	   0x01		Turn on general debugging messages.
 	   0x02		Turn on receive debugging messages.
 	   0x04		Turn on transmit debugging messages.
 	   0x08		Turn on list debugging messages.
+	   ====		=====================================
 
 	2. You can append aui=1 to the end of the insmod line to cause
-           the adapter to use the AUI interface instead of the 10 Base T
-           interface.  This is also what to do if you want to use the BNC
+	   the adapter to use the AUI interface instead of the 10 Base T
+	   interface.  This is also what to do if you want to use the BNC
 	   connector on a TLAN based device.  (Setting this option on a
 	   device that does not have an AUI/BNC connector will probably
 	   cause it to not function correctly.)
@@ -70,41 +88,45 @@ II.   Driver Options
 
 	5. You have to use speed=X duplex=Y together now. If you just
 	   do "insmod tlan.o speed=100" the driver will do Auto-Neg.
-	   To force a 10Mbps Half-Duplex link do "insmod tlan.o speed=10 
+	   To force a 10Mbps Half-Duplex link do "insmod tlan.o speed=10
 	   duplex=1".
 
 	6. If the driver is built into the kernel, you can use the 3rd
 	   and 4th parameters to set aui and debug respectively.  For
-	   example:
+	   example::
 
-	   ether=0,0,0x1,0x7,eth0
+		ether=0,0,0x1,0x7,eth0
 
 	   This sets aui to 0x1 and debug to 0x7, assuming eth0 is a
 	   supported TLAN device.
 
 	   The bits in the third byte are assigned as follows:
 
-		0x01 = aui
-		0x02 = use half duplex
-		0x04 = use full duplex
-		0x08 = use 10BaseT
-		0x10 = use 100BaseTx
+		====   ===============
+		0x01   aui
+		0x02   use half duplex
+		0x04   use full duplex
+		0x08   use 10BaseT
+		0x10   use 100BaseTx
+		====   ===============
 
 	   You also need to set both speed and duplex settings when forcing
-	   speeds with kernel-parameters. 
+	   speeds with kernel-parameters.
 	   ether=0,0,0x12,0,eth0 will force link to 100Mbps Half-Duplex.
 
 	7. If you have more than one tlan adapter in your system, you can
 	   use the above options on a per adapter basis. To force a 100Mbit/HD
-	   link with your eth1 adapter use:
-	   
-	   insmod tlan speed=0,100 duplex=0,1
+	   link with your eth1 adapter use::
+
+		insmod tlan speed=0,100 duplex=0,1
 
 	   Now eth0 will use auto-neg and eth1 will be forced to 100Mbit/HD.
 	   Note that the tlan driver supports a maximum of 8 adapters.
 
 
-III.  Things to try if you have problems.
+III. Things to try if you have problems
+=======================================
+
 	1. Make sure your card's PCI id is among those listed in
 	   section I, above.
 	2. Make sure routing is correct.
@@ -113,5 +135,6 @@ III.  Things to try if you have problems.
 
 There is also a tlan mailing list which you can join by sending "subscribe tlan"
 in the body of an email to majordomo@vuser.vu.union.edu.
+
 There is also a tlan website at http://www.compaq.com