Merge tag 'asoc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.10

There's been a few bits of framework work this time around and quite a
lot of cleanups and improvements to existing code:

 - Support for stereo DAPM controls from Chen-yu Tsai.
 - Some initial work on the of-graph sound card from Morimoto-san, the
   main bulk of this is currently in binding review.
 - Lots of Renesas cleanups from Morimoto-san and sunxi work from
   Chen-yu Tsai.
 - regmap conversions of the remaining AC'97 drivers from Lars-Peter
   Clausen.
 - A new version of the topology ABI from Mengdong Lin.
 - New drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek
   RT5665.

29 files changed, 644 insertions, 35 deletions

diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
index b82deeaec314..470def06ab0a 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
+++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
@@ -1,4 +1,4 @@
-What:           state
+What:           /sys/devices/system/ibm_rtl/state
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>
@@ -10,7 +10,7 @@ Description:    The state file allows a means by which to change in and
 Users:          The ibm-prtm userspace daemon uses this interface.
 
 
-What:           version
+What:           /sys/devices/system/ibm_rtl/version
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>
diff --git a/Documentation/ABI/testing/sysfs-platform-sst-atom b/Documentation/ABI/testing/sysfs-platform-sst-atom
new file mode 100644
index 000000000000..0d07c0395660
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-sst-atom
@@ -0,0 +1,17 @@
+What:		/sys/devices/platform/8086%x:00/firmware_version
+Date:		November 2016
+KernelVersion:	4.10
+Contact:	"Sebastien Guiriec" <sebastien.guiriec@intel.com>
+Description:
+		LPE Firmware version for SST driver on all atom
+		plaforms (BYT/CHT/Merrifield/BSW).
+		If the FW has never been loaded it will display:
+			"FW not yet loaded"
+		If FW has been loaded it will display:
+			"v01.aa.bb.cc"
+		aa: Major version is reflecting SoC version:
+			0d: BYT FW
+			0b: BSW FW
+			07: Merrifield FW
+		bb: Minor version
+		cc: Build version
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
index fbbacd958240..6f28969af9dc 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -6,7 +6,7 @@ perform in-band IPMI communication with their host.
 
 Required properties:
 
-- compatible : should be "aspeed,ast2400-bt-bmc"
+- compatible : should be "aspeed,ast2400-ibt-bmc"
 - reg: physical address and size of the registers
 
 Optional properties:
@@ -17,7 +17,7 @@ Optional properties:
 Example:
 
 	ibt@1e789140 {
-		compatible = "aspeed,ast2400-bt-bmc";
+		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 4e00e859e885..bfa461aaac99 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -43,6 +43,9 @@ Optional properties:
   reset signal present internally in some host controller IC designs.
   See Documentation/devicetree/bindings/reset/reset.txt for details.
 
+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
   bus interface unit clock and the card interface unit clock.
 
@@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};
 
 [board specific internal DMA resources]
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index e1d76812419c..05150957ecfd 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers:
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in ePAPR).
-- phy-mode: string, operation mode of the PHY interface; supported values are
-  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
-  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a
-  de-facto standard property;
+- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
+  standard property; supported values are:
+  * "mii"
+  * "gmii"
+  * "sgmii"
+  * "qsgmii"
+  * "tbi"
+  * "rev-mii"
+  * "rmii"
+  * "rgmii" (RX and TX delays are added by the MAC when required)
+  * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
+     MAC should not add the RX or TX delays in this case)
+  * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
+     should not add an RX delay in this case)
+  * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
+     should not add an TX delay in this case)
+  * "rtbi"
+  * "smii"
+  * "xgmii"
+  * "trgmii"
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
   device; this property is described in ePAPR and so preferred;
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
index ba67b39939c1..71aeda1ca055 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
@@ -26,13 +26,16 @@ Required properties:
 	- "sys"
 	- "legacy"
 	- "client"
-- resets: Must contain five entries for each entry in reset-names.
+- resets: Must contain seven entries for each entry in reset-names.
 	   See ../reset/reset.txt for details.
 - reset-names: Must include the following names
 	- "core"
 	- "mgmt"
 	- "mgmt-sticky"
 	- "pipe"
+	- "pm"
+	- "aclk"
+	- "pclk"
 - pinctrl-names : The pin control state names
 - pinctrl-0: The "default" pinctrl state
 - #interrupt-cells: specifies the number of cells needed to encode an
@@ -86,8 +89,10 @@ pcie0: pcie@f8000000 {
 	reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
 	reg-names = "axi-base", "apb-base";
 	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+		      "pm", "pclk", "aclk";
 	phys = <&pcie_phy>;
 	phy-names = "pcie-phy";
 	pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index f9753c416974..b24583aa34c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -14,11 +14,6 @@ Required properies:
  - #size-cells	: The value of this property must be 1
  - ranges	: defines mapping between pin controller node (parent) to
    gpio-bank node (children).
- - interrupt-parent: phandle of the interrupt parent to which the external
-   GPIO interrupts are forwarded to.
- - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
-   which includes IRQ mux selection register, and the offset of the IRQ mux
-   selection register.
  - pins-are-numbered: Specify the subnodes are using numbered pinmux to
    specify pins.
 
@@ -37,6 +32,11 @@ Required properties:
 
 Optional properties:
  - reset:	  : Reference to the reset controller
+ - interrupt-parent: phandle of the interrupt parent to which the external
+   GPIO interrupts are forwarded to.
+ - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
+   which includes IRQ mux selection register, and the offset of the IRQ mux
+   selection register.
 
 Example:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
new file mode 100644
index 000000000000..5b9b38f578bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
@@ -0,0 +1,88 @@
+Devicetree bindings for the Axentia TSE-850 audio complex
+
+Required properties:
+  - compatible: "axentia,tse850-pcm5142"
+  - axentia,ssc-controller: The phandle of the atmel SSC controller used as
+    cpu dai.
+  - axentia,audio-codec: The phandle of the PCM5142 codec.
+  - axentia,add-gpios: gpio specifier that controls the mixer.
+  - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
+  - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
+  - axentia,ana-supply: Regulator that supplies the output amplifier. Must
+    support voltages in the 2V - 20V range, in 1V steps.
+
+The schematics explaining the gpios are as follows:
+
+               loop1 relays
+   IN1 +---o  +------------+  o---+ OUT1
+            \                /
+             +              +
+             |   /          |
+             +--o  +--.     |
+             |  add   |     |
+             |        V     |
+             |      .---.   |
+   DAC +----------->|Sum|---+
+             |      '---'   |
+             |              |
+             +              +
+
+   IN2 +---o--+------------+--o---+ OUT2
+               loop2 relays
+
+The 'loop1' gpio pin controlls two relays, which are either in loop position,
+meaning that input and output are directly connected, or they are in mixer
+position, meaning that the signal is passed through the 'Sum' mixer. Similarly
+for 'loop2'.
+
+In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
+(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
+are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
+are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
+the PCM5142 codec.
+
+Example:
+
+	&i2c {
+		codec: pcm5142@4c {
+			compatible = "ti,pcm5142";
+
+			reg = <0x4c>;
+
+			AVDD-supply = <&reg_3v3>;
+			DVDD-supply = <&reg_3v3>;
+			CPVDD-supply = <&reg_3v3>;
+
+			clocks = <&sck>;
+
+			pll-in = <3>;
+			pll-out = <6>;
+		};
+	};
+
+	ana: ana-reg {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,ssc-controller = <&ssc0>;
+		axentia,audio-codec = <&codec>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/cs35l34.txt b/Documentation/devicetree/bindings/sound/cs35l34.txt
new file mode 100644
index 000000000000..b218ead2e68e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l34.txt
@@ -0,0 +1,64 @@
+CS35L34 Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l34"
+
+  - reg : the I2C address of the device for I2C.
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  - cirrus,boost-vtge-millivolt : Boost Voltage Value.  Configures the boost
+    converter's output voltage in mV. The range is from VP to 8V with
+    increments of 100mV.
+
+  - cirrus,boost-nanohenry: Inductor value for boost converter. The value is
+    in nH and they can be values of 1000nH, 1100nH, 1200nH, 1500nH, and 2200nH.
+
+Optional properties:
+
+  - reset-gpios: GPIO used to reset the amplifier.
+
+  - interrupt-parent : Specifies the phandle of the interrupt controller to
+    which the IRQs from CS35L34 are delivered to.
+  - interrupts : IRQ line info CS35L34.
+    (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+    for further information relating to interrupt properties)
+
+  - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The
+    range starts at 1200mA and goes to a maximum of 3840mA with increments of
+    80mA. The default value is 2480mA.
+
+  - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the
+    received mono data is in the left or right portion of the I2S frame
+    according to the AD0 pin or directly via this configuration.
+    0x0 (Default) = Selected by AD0 input (if AD0 = LOW, use left channel),
+    0x2 = Left,
+    0x1 = Selected by the inversion of the AD0 input (if AD0 = LOW, use right
+    channel),
+    0x3 = Right.
+
+  - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take
+    effect without waiting for a zero cross.
+
+  - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of
+    SCLK. Otherwise, data is on the falling edge of SCLK.
+
+
+Example:
+
+cs35l34: cs35l34@40 {
+	compatible = "cirrus,cs35l34";
+	reg = <0x40>;
+
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	reset-gpios = <&gpio 10 0>;
+
+	cirrus,boost-vtge-milltvolt = <8000>; /* 8V */
+	cirrus,boost-ind-nanohenry = <1000>; /* 1uH */
+	cirrus,boost-peak-milliamp = <3000>; /* 3A */
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt
new file mode 100644
index 000000000000..9a2c5e2423d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l42.txt
@@ -0,0 +1,110 @@
+CS42L42 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l42"
+
+  - reg : the I2C address of the device for I2C.
+
+  - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply :
+  power supplies for the device, as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+  deasserted before communication to the codec starts.
+
+  - interrupt-parent : Specifies the phandle of the interrupt controller to
+  which the IRQs from CS42L42 are delivered to.
+
+  - interrupts : IRQ line info CS42L42.
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+  for further information relating to interrupt properties)
+
+  - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense
+  polarity. Normal jacks will short tip sense pin to HS1 when headphones are
+  plugged in and leave tip sense floating when not plugged in. Inverting jacks
+  short tip sense when unplugged and float when plugged in.
+
+  0 = (Default) Non-inverted
+  1 = Inverted
+
+  - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
+  debounce, the tip sense pin might be noisy on a plug event.
+
+  0 - 0ms,
+  1 - 125ms,
+  2 - 250ms,
+  3 - 500ms,
+  4 - 750ms,
+  5 - (Default) 1s,
+  6 - 1.25s,
+  7 - 1.5s,
+
+  - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG.
+  With no debounce, the tip sense pin might be noisy on an unplug event.
+
+  0 - 0ms,
+  1 - 125ms,
+  2 - 250ms,
+  3 - 500ms,
+  4 - 750ms,
+  5 - (Default) 1s,
+  6 - 1.25s,
+  7 - 1.5s,
+
+  - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after
+  enabling button detection interrupts. After auto-detection and before
+  servicing button interrupts, the HS bias needs time to settle. If you
+  don't wait, there is possibility for erroneous button interrupt.
+
+  0ms - 200ms,
+  Default = 100ms
+
+  - cirrus,btn-det-event-dbnce : This sets how long the driver delays after
+  receiving a button press interrupt. With level detect interrupts, you want
+  to wait a small amount of time to make sure the button press is making a
+  clean connection with the bias resistors.
+
+  0ms - 20ms,
+  Default = 10ms
+
+  - cirrus,bias-lvls : For a level-detect headset button scheme, each button
+  will bias the mic pin to a certain voltage. To determine which button was
+  pressed, the driver will compare this biased voltage to sequential,
+  decreasing voltages and will stop when a comparator is tripped,
+  indicating a comparator voltage < bias voltage. This value represents a
+  percentage of the internally generated HS bias voltage. For different
+  hardware setups, a designer might want to tweak this. This is an array of
+  descending values for the comparator voltage.
+
+  Array of 4 values
+  Each 0-63
+  < x1 x2 x3 x4 >
+  Default = < 15 8 4 1>
+
+
+Example:
+
+cs42l42: cs42l42@48 {
+	compatible = "cirrus,cs42l42";
+	reg = <0x48>;
+	VA-supply = <&dummy_vreg>;
+	VP-supply = <&dummy_vreg>;
+	VCP-supply = <&dummy_vreg>;
+	VD_FILT-supply = <&dummy_vreg>;
+	VL-supply = <&dummy_vreg>;
+
+	reset-gpios = <&axi_gpio_0 1 0>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <55 8>
+
+	cirrus,ts-inv = <0x00>;
+	cirrus,ts-dbnc-rise = <0x05>;
+	cirrus,ts-dbnc-fall = <0x00>;
+	cirrus,btn-det-init-dbnce = <100>;
+	cirrus,btn-det-event-dbnce = <10>;
+	cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
+	cirrus,hs-bias-ramp-rate = <0x02>;
+};
\ No newline at end of file
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
index 55b53e1fd72c..e0b6165c9cfc 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
@@ -43,7 +43,7 @@ mcbsp0: mcbsp@1d10000 {
 		<0x00310000 0x1000>;
 	reg-names = "mpu", "dat";
 	interrupts = <97 98>;
-	interrupts-names = "rx", "tx";
+	interrupt-names = "rx", "tx";
 	dmas = <&edma0 3 1
 		&edma0 2 1>;
 	dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
index fd40c852d7c7..462b04e8209f 100644
--- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
index d9d8635ff94c..6a4aadc4ce06 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
@@ -44,8 +44,7 @@ Required dai-link subnodes:
 Required CPU/CODEC subnodes properties:
 
 -link-name		: Name of the dai link.
--sound-dai		: phandle and port of CPU/CODEC
--capture-dai		: phandle and port of CPU/CODEC
+-sound-dai		: phandle/s and port of CPU/CODEC
 
 Example:
 
@@ -73,7 +72,7 @@ sound: sound {
 			sound-dai = <&lpass MI2S_PRIMARY>;
 		};
 		codec {
-			sound-dai = <&wcd_codec 0>;
+			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
 		};
 	};
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
new file mode 100644
index 000000000000..ccb401cfef9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@@ -0,0 +1,85 @@
+msm8916 analog audio CODEC
+
+Bindings for codec Analog IP which is integrated in pmic pm8916,
+
+## Bindings for codec core on pmic:
+
+Required properties
+ - compatible = "qcom,pm8916-wcd-analog-codec";
+ - reg: represents the slave base address provided to the peripheral.
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts: List of interrupts in given SPMI peripheral.
+ - interrupt-names: Names specified to above list of interrupts in same
+		    order. List of supported interrupt names are:
+  "cdc_spk_cnp_int" - Speaker click and pop interrupt.
+  "cdc_spk_clip_int" - Speaker clip interrupt.
+  "cdc_spk_ocp_int" - Speaker over current protect interrupt.
+  "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
+  "mbhc_but_rel_det" - button release interrupt.
+  "mbhc_but_press_det" - button press event
+  "mbhc_ins_rem_det" - jack insert removal detect interrupt.
+  "mbhc_switch_int"	- multi button headset interrupt.
+  "cdc_ear_ocp_int" - Earphone over current protect interrupt.
+  "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
+  "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
+  "cdc_ear_cnp_int" - earphone cnp interrupt.
+  "cdc_hphr_cnp_int" - hphr click and pop interrupt.
+  "cdc_hphl_cnp_int" - hphl click and pop interrupt.
+
+ - clocks: Handle to mclk.
+ - clock-names: should be "mclk"
+ - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
+ - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
+ - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
+
+Optional Properties:
+- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
+			 connected.
+- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
+			 connected.
+
+Example:
+
+spmi_bus {
+	...
+	audio-codec@f000{
+		compatible = "qcom,pm8916-wcd-analog-codec";
+		reg = <0xf000 0x200>;
+		reg-names = "pmic-codec-core";
+		clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+		clock-names = "mclk";
+		interrupt-parent = <&spmi_bus>;
+		interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+		interrupt-names = "cdc_spk_cnp_int",
+				  "cdc_spk_clip_int",
+				  "cdc_spk_ocp_int",
+				  "mbhc_ins_rem_det1",
+				  "mbhc_but_rel_det",
+				  "mbhc_but_press_det",
+				  "mbhc_ins_rem_det",
+				  "mbhc_switch_int",
+				  "cdc_ear_ocp_int",
+				  "cdc_hphr_ocp_int",
+				  "cdc_hphl_ocp_det",
+				  "cdc_ear_cnp_int",
+				  "cdc_hphr_cnp_int",
+				  "cdc_hphl_cnp_int";
+	               VDD-CDC-IO-supply = <&pm8916_l5>;
+	               VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
+	               VDD-MICBIAS-supply = <&pm8916_l13>;
+	               #sound-dai-cells = <1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt
new file mode 100644
index 000000000000..1c8e4cb25176
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt
@@ -0,0 +1,20 @@
+msm8916 digital audio CODEC
+
+## Bindings for codec core in lpass:
+
+Required properties
+ - compatible = "qcom,msm8916-wcd-digital-codec";
+ - reg: address space for lpass codec.
+ - clocks: Handle to mclk and ahbclk
+ - clock-names: should be "mclk", "ahbix-clk".
+
+Example:
+
+audio-codec@771c000{
+	compatible = "qcom,msm8916-wcd-digital-codec";
+	reg = <0x0771c000 0x400>;
+	clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+		 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "ahbix-clk", "mclk";
+	#sound-dai-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index 9cabfc18cb57..929ca6756b02 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -13,6 +13,9 @@ Optional properties:
 - clocks: The phandle of the master clock to the CODEC
 - clock-names: Should be "mclk"
 
+- realtek,dmic-init-delay-ms
+  Set the DMIC initial delay (ms) to wait it ready.
+
 Pins on the device (for linking into audio routes) for RT5514:
 
   * DMIC1L
diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt
index 7d3c974c6e2e..70eaeaed2b18 100644
--- a/Documentation/devicetree/bindings/sound/rt5663.txt
+++ b/Documentation/devicetree/bindings/sound/rt5663.txt
@@ -1,10 +1,10 @@
-RT5663/RT5668 audio CODEC
+RT5663 audio CODEC
 
 This device supports I2C only.
 
 Required properties:
 
-- compatible : One of "realtek,rt5663" or "realtek,rt5668".
+- compatible : "realtek,rt5663".
 
 - reg : The I2C address of the device.
 
@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 
-Pins on the device (for linking into audio routes) for RT5663/RT5668:
+Pins on the device (for linking into audio routes) for RT5663:
 
   * IN1P
   * IN1N
diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt
new file mode 100755
index 000000000000..419c89219681
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@@ -0,0 +1,68 @@
+RT5665/RT5666/RT5668 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO4 pin as dmic1 data pin
+  2: using IN2N pin as dmic2 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using GPIO5 pin as dmic2 data pin
+  2: using IN2P pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5665";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
new file mode 100644
index 000000000000..94442e5673b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
@@ -0,0 +1,38 @@
+Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
+
+Required properties:
+
+ - compatible		 : "samsung,tm2-audio"
+ - model		 : the user-visible name of this sound complex
+ - audio-codec		 : the phandle of the wm5110 audio codec node,
+			   as described in ../mfd/arizona.txt
+ - i2s-controller	 : the phandle of the I2S controller
+ - audio-amplifier	 : the phandle of the MAX98504 amplifier
+ - samsung,audio-routing : a list of the connections between audio components;
+			   each entry is a pair of strings, the first being the
+			   connection's sink, the second being the connection's
+			   source; valid names for sources and sinks are the
+			   WM5110's and MAX98504's pins and the jacks on the
+			   board: HP, SPK, Main Mic, Sub Mic, Third Mic,
+			   Headset Mic
+ - mic-bias-gpios	 : GPIO pin that enables the Main Mic bias regulator
+
+
+Example:
+
+sound {
+	compatible = "samsung,tm2-audio";
+	audio-codec = <&wm5110>;
+	i2s-controller = <&i2s0>;
+	audio-amplifier = <&max98504>;
+	mic-bias-gpios = <&gpr3 2 0>;
+	model = "wm5110";
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+		"SPK", "SPKOUT",
+		"SPKOUT", "HPOUT2L",
+		"SPKOUT", "HPOUT2R",
+		"Main Mic", "MICBIAS2",
+		"IN1R", "Main Mic";
+};
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 0dce690f78f5..3033bd8aab0f 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -1,8 +1,12 @@
 * Allwinner A10 Codec
 
 Required properties:
-- compatible: must be either "allwinner,sun4i-a10-codec" or
-  "allwinner,sun7i-a20-codec"
+- compatible: must be one of the following compatibles:
+		- "allwinner,sun4i-a10-codec"
+		- "allwinner,sun6i-a31-codec"
+		- "allwinner,sun7i-a20-codec"
+		- "allwinner,sun8i-a23-codec"
+		- "allwinner,sun8i-h3-codec"
 - reg: must contain the registers location and length
 - interrupts: must contain the codec interrupt
 - dmas: DMA channels for tx and rx dma. See the DMA client binding,
@@ -17,6 +21,43 @@ Required properties:
 Optional properties:
 - allwinner,pa-gpios: gpio to enable external amplifier
 
+Required properties for the following compatibles:
+		- "allwinner,sun6i-a31-codec"
+		- "allwinner,sun8i-a23-codec"
+		- "allwinner,sun8i-h3-codec"
+- resets: phandle to the reset control for this device
+- allwinner,audio-routing: A list of the connections between audio components.
+			   Each entry is a pair of strings, the first being the
+			   connection's sink, the second being the connection's
+			   source. Valid names include:
+
+			   Audio pins on the SoC:
+			   "HP"
+			   "HPCOM"
+			   "LINEIN"
+			   "LINEOUT"	(not on sun8i-a23)
+			   "MIC1"
+			   "MIC2"
+			   "MIC3"	(sun6i-a31 only)
+
+			   Microphone biases from the SoC:
+			   "HBIAS"
+			   "MBIAS"
+
+			   Board connectors:
+			   "Headphone"
+			   "Headset Mic"
+			   "Line In"
+			   "Line Out"
+			   "Mic"
+			   "Speaker"
+
+Required properties for the following compatibles:
+		- "allwinner,sun8i-a23-codec"
+		- "allwinner,sun8i-h3-codec"
+- allwinner,codec-analog-controls: A phandle to the codec analog controls
+				   block in the PRCM.
+
 Example:
 codec: codec@01c22c00 {
 	#sound-dai-cells = <0>;
@@ -28,3 +69,23 @@ codec: codec@01c22c00 {
 	dmas = <&dma 0 19>, <&dma 0 19>;
 	dma-names = "rx", "tx";
 };
+
+codec: codec@01c22c00 {
+	#sound-dai-cells = <0>;
+	compatible = "allwinner,sun6i-a31-codec";
+	reg = <0x01c22c00 0x98>;
+	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+	clock-names = "apb", "codec";
+	resets = <&ccu RST_APB1_CODEC>;
+	dmas = <&dma 15>, <&dma 15>;
+	dma-names = "rx", "tx";
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1",	"MBIAS",
+		"MIC1", "Mic",
+		"MIC2", "HBIAS",
+		"MIC2", "Headset Mic";
+};
diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
new file mode 100644
index 000000000000..779b735781ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
@@ -0,0 +1,16 @@
+* Allwinner Codec Analog Controls
+
+Required properties:
+- compatible: must be one of the following compatibles:
+		- "allwinner,sun8i-a23-codec-analog"
+		- "allwinner,sun8i-h3-codec-analog"
+
+Required properties if not a sub-node of the PRCM node:
+- reg: must contain the registers location and length
+
+Example:
+prcm: prcm@01f01400 {
+	codec_analog: codec-analog {
+		compatible = "allwinner,sun8i-a23-codec-analog";
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
index 9340d2ddcc54..6fbba562eaa7 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -12,6 +12,7 @@ Required properties:
     "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
     "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
     "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+    "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
 
 - reg - <int> -  I2C slave address
 - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
diff --git a/Documentation/devicetree/bindings/sound/wm8580.txt b/Documentation/devicetree/bindings/sound/wm8580.txt
index 7d9821f348da..78fce9b14954 100644
--- a/Documentation/devicetree/bindings/sound/wm8580.txt
+++ b/Documentation/devicetree/bindings/sound/wm8580.txt
@@ -1,10 +1,10 @@
-WM8580 audio CODEC
+WM8580 and WM8581 audio CODEC
 
 This device supports I2C only.
 
 Required properties:
 
-  - compatible : "wlf,wm8580"
+  - compatible : "wlf,wm8580", "wlf,wm8581"
 
   - reg : the I2C address of the device.
 
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 14cdc101d165..1b5f15653b1b 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -447,7 +447,6 @@ prototypes:
 	int (*flush) (struct file *);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t start, loff_t end, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*readv) (struct file *, const struct iovec *, unsigned long,
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index d619c8d71966..b5039a00caaf 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -828,7 +828,6 @@ struct file_operations {
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
diff --git a/Documentation/i2c/i2c-topology b/Documentation/i2c/i2c-topology
index e0aefeece551..1a014fede0b7 100644
--- a/Documentation/i2c/i2c-topology
+++ b/Documentation/i2c/i2c-topology
@@ -326,7 +326,7 @@ Two parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |  parent- |--'  '--------'
                 .--|  locked  |     .--------.
@@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes
 
 This is a good topology.
 
-                                   .--------.
+                                    .--------.
                    .----------.  .--| dev D1 |
                    |   mux-   |--'  '--------'
                 .--|  locked  |     .--------.
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 6d6c07cf1a9a..63912ef34606 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
 Switch tagging protocols
 ------------------------
 
-DSA currently supports 4 different tagging protocols, and a tag-less mode as
+DSA currently supports 5 different tagging protocols, and a tag-less mode as
 well. The different protocols are implemented in:
 
 net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
 net/dsa/tag_dsa.c: Marvell's original DSA tag
 net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
 net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
+net/dsa/tag_qca.c: Qualcomm's 2 bytes tag
 
 The exact format of the tag protocol is vendor specific, but in general, they
 all contain something which:
diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt
index 399e4e866a9c..433b6724797a 100644
--- a/Documentation/networking/nf_conntrack-sysctl.txt
+++ b/Documentation/networking/nf_conntrack-sysctl.txt
@@ -62,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds)
 	protocols.
 
 nf_conntrack_helper - BOOLEAN
-	0 - disabled
-	not 0 - enabled (default)
+	0 - disabled (default)
+	not 0 - enabled
 
 	Enable automatic conntrack helper assignment.
+	If disabled it is required to set up iptables rules to assign
+	helpers to connections.  See the CT target description in the
+	iptables-extensions(8) man page for further information.
 
 nf_conntrack_icmp_timeout - INTEGER (seconds)
 	default 30
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 739db9ab16b2..6bbceb9a3a19 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
 conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
 such as migration.
 
+When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
+set of bits that KVM can return in struct kvm_clock_data's flag member.
+
+The only flag defined now is KVM_CLOCK_TSC_STABLE.  If set, the returned
+value is the exact kvmclock value seen by all VCPUs at the instant
+when KVM_GET_CLOCK was called.  If clear, the returned value is simply
+CLOCK_MONOTONIC plus a constant offset; the offset can be modified
+with KVM_SET_CLOCK.  KVM will try to make all VCPUs follow this clock,
+but the exact value read by each VCPU could differ, because the host
+TSC is not stable.
+
 struct kvm_clock_data {
 	__u64 clock;  /* kvmclock current value */
 	__u32 flags;