ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 567 deletions

diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
deleted file mode 100644
index bfb04b31e11b..000000000000
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ /dev/null
@@ -1,567 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
-	chassis-type = "handset";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-	};
-
-	aliases {
-		mmc0 = &sdhci_0;
-		mmc1 = &sdhci_2;
-		mmc2 = &sdhci_3;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = "serial2:115200n8";
-	};
-
-	vemmc_reg: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	tsp_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_FIXED_VOLTAGES";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_af_28v_reg: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "8M_AF_2.8V_EN";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_io_en_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_IO_EN";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	cam_io_12v_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "8M_1.2V_EN";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vt_core_15v_reg: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VT_CORE_1.5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-down-key {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		vol-up-key {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	wlan_pwrseq: sdhci3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-
-		pmic_ap_clk: pmic-ap-clk {
-			/* Workaround for missing clock on max8997 PMIC */
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&camera {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&varm_breg>;
-};
-
-&cpu_thermal {
-	cooling-maps {
-		map0 {
-			/* Corresponds to 800MHz at freq_table */
-			cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
-		};
-		map1 {
-			/* Corresponds to 200MHz at freq_table */
-			cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
-		};
-	};
-};
-
-&dsi_0 {
-	vddcore-supply = <&vusb_reg>;
-	vddio-supply = <&vmipi_reg>;
-	samsung,burst-clock-frequency = <500000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e8aa0";
-		vdd3-supply = <&vcclcd_reg>;
-		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay = <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safe1_sreg>;
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			  <&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			  <&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			  <&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-		assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			  <&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimd {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&vusb_reg>;
-	vusb_a-supply = <&vusbdac_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1280>;
-		avdd-supply = <&tsp_reg>;
-		vdd-supply = <&tsp_reg>;
-	};
-};
-
-&i2c_5 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pmic@66 {
-		compatible = "maxim,max8997-pmic";
-
-		reg = <0x66>;
-		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
-				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
-
-		max8997,pmic-buck1-uses-gpio-dvs;
-		max8997,pmic-buck2-uses-gpio-dvs;
-		max8997,pmic-buck5-uses-gpio-dvs;
-
-		max8997,pmic-ignore-gpiodvs-side-effect;
-		max8997,pmic-buck125-default-dvs-idx = <0>;
-
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
-						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-						 <950000>,  <900000>,
-						 <1100000>, <1000000>,
-						 <950000>,  <900000>;
-
-		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			valive_reg: LDO2 {
-				regulator-name = "VALIVE_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: LDO3 {
-				regulator-name = "VUSB_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			vmipi_reg: LDO4 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vpda_reg: LDO6 {
-				regulator-name = "VCC_1.8V_PDA";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: LDO7 {
-				regulator-name = "CAM_ISP_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vusbdac_reg: LDO8 {
-				regulator-name = "VUSB+VDAC_3.3V_C210";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vccpda_reg: LDO9 {
-				regulator-name = "VCC_2.8V_PDA";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			vpll_reg: LDO10 {
-				regulator-name = "VPLL_1.1V_C210";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vtcam_reg: LDO12 {
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcclcd_reg: LDO13 {
-				regulator-name = "VCC_3.3V_LCD";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vlcd_reg: LDO15 {
-				regulator-name = "VLCD_2.2V";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-			};
-
-			camsensor_reg: LDO16 {
-				regulator-name = "CAM_SENSOR_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			tflash_reg: LDO17 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vddq_reg: LDO21 {
-				regulator-name = "VDDQ_M1M2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			varm_breg: BUCK1 {
-				regulator-name = "VARM_1.2V_C210";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			vint_breg: BUCK2 {
-				regulator-name = "VINT_1.1V_C210";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			camisp_breg: BUCK4 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vmem_breg: BUCK5 {
-				regulator-name = "VMEM_1.2V_C210";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vccsub_breg: BUCK7 {
-				regulator-name = "VCC_SUB_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			safe1_sreg: ESAFEOUT1 {
-				regulator-name = "SAFEOUT1";
-			};
-
-			safe2_sreg: ESAFEOUT2 {
-				regulator-name = "SAFEOUT2";
-				regulator-boot-on;
-			};
-
-			EN32KHZ_AP {
-				regulator-name = "EN32KHZ_AP";
-				regulator-always-on;
-			};
-
-			EN32KHZ_CP {
-				regulator-name = "EN32KHZ_CP";
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pinctrl_1 {
-	bt_shutdown: bt-shutdown-pins {
-		samsung,pins = "gpl1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_host_wakeup: bt-host-wakeup-pins {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bt_device_wakeup: bt-device-wakeup-pins {
-		samsung,pins = "gpx3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_0 {
-	bus-width = <8>;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vemmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&tflash_reg>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sdhci_3 {
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	non-removable;
-	bus-width = <4>;
-	mmc-pwrseq = <&wlan_pwrseq>;
-	vmmc-supply = <&tflash_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		interrupt-parent = <&gpx2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&serial_0 {
-	status = "okay";
-	pinctrl-0 = <&uart0_data &uart0_fctl>;
-	pinctrl-names = "default";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
-		pinctrl-names = "default";
-		shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};