ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 849 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
deleted file mode 100644
index 81a9a302aec1..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ /dev/null
@@ -1,849 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xF0000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p8v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	i2c2mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
-			     &gpio4 15 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-		idle-state = <0>;
-
-		i2c2mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2mux@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c3mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c3mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-speaker-enable {
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		led-ttymxc4-rs232 {
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "on";
-		};
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds1: backlight-lvds1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel-lvds1 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds1>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6_max-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: flash@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	/delete-property/ interrupts;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx6q-nitrogen6-max {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2mux: i2c2muxgrp {
-			fsl,pins = <
-				/* ov5642 camera i2c enable */
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
-				/* ov5640_mipi camera i2c enable */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				/* PCIe I2C enable */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				/* PCIe reset */
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_rv4162: rv4162grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
-				/* RS485 RX Enable: pull up */
-				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
-				/* RS485 DEN: pull down */
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
-				/* RS485/!RS232 Select: pull down (rs232) */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
-				/* ON: pull down */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};