diff options
author | Thierry Reding <treding@nvidia.com> | 2019-01-23 12:39:41 +0100 |
---|---|---|
committer | Thierry Reding <treding@nvidia.com> | 2019-01-25 13:45:49 +0100 |
commit | d428f35d959c951244970c5f142616802f39de33 (patch) | |
tree | e60345dbb08e2d13b65e86d2457d974439532c36 /arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | |
parent | arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names (diff) | |
download | wireguard-linux-d428f35d959c951244970c5f142616802f39de33.tar.xz wireguard-linux-d428f35d959c951244970c5f142616802f39de33.zip |
arm64: tegra: p2771-0000: Use TEGRA186_ prefix for GPIO names
The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts')
-rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 18 |
1 files changed, 11 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 65487eee2ce6..0f3c6cebb049 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -26,7 +26,8 @@ reg = <0x74>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_MAIN_GPIO(Y, 0) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA186_MAIN_GPIO(Y, 0) + GPIO_ACTIVE_LOW>; #gpio-cells = <2>; gpio-controller; @@ -37,7 +38,8 @@ reg = <0x77>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_MAIN_GPIO(Y, 6) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA186_MAIN_GPIO(Y, 6) + GPIO_ACTIVE_LOW>; #gpio-cells = <2>; gpio-controller; @@ -108,7 +110,8 @@ hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_MAIN_GPIO(P, 1) GPIO_ACTIVE_LOW>; + nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1) + GPIO_ACTIVE_LOW>; }; dpaux@155c0000 { @@ -121,7 +124,7 @@ power { label = "Power"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_POWER>; @@ -132,7 +135,7 @@ volume-up { label = "Volume Up"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; @@ -141,7 +144,7 @@ volume-down { label = "Volume Down"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; @@ -158,7 +161,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) + GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; |