diff options
| author |   Stephan Gerhold <stephan@gerhold.net> | 2023-05-29 14:46:58 +0200 |
|---|---|---|
| committer |   Bjorn Andersson <andersson@kernel.org> | 2023-05-29 14:37:01 -0700 |
| commit | 41e22c2ff38eaea777f1158071539e659aa7980d (patch) | |
| tree | cba75067ec38286420d058ae1040ee0f1802bde3 /arch/arm64/boot/dts/qcom/apq8016-sbc.dts | |
| parent | arm64: dts: qcom: qrb4210-rb2: Enable USB node (diff) | |
| download | wireguard-linux-41e22c2ff38eaea777f1158071539e659aa7980d.tar.xz wireguard-linux-41e22c2ff38eaea777f1158071539e659aa7980d.zip | |
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.
Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net
Diffstat (limited to 'arch/arm64/boot/dts/qcom/apq8016-sbc.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 1c5d55854893..82f141b55eb3 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -75,7 +75,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -101,13 +101,13 @@ button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; }; }; leds { pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, + pinctrl-0 = <&tlmm_leds>, <&pm8916_gpios_leds>, <&pm8916_mpps_leds>; @@ -117,7 +117,7 @@ label = "apq8016-sbc:green:user1"; function = LED_FUNCTION_HEARTBEAT; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -126,7 +126,7 @@ label = "apq8016-sbc:green:user2"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; @@ -186,14 +186,14 @@ compatible = "adi,adv7533"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; clocks = <&rpmcc RPM_SMD_BB_CLK2>; clock-names = "cec"; - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; avdd-supply = <&pm8916_l6>; v1p2-supply = <&pm8916_l6>; @@ -276,8 +276,8 @@ compatible = "ovti,ov5640"; reg = <0x3b>; - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_default>; @@ -373,7 +373,7 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &sound { @@ -515,7 +515,7 @@ * ones actually used for GPIO. */ -&msmgpio { +&tlmm { gpio-line-names = "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ @@ -640,7 +640,7 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; - msmgpio_leds: msmgpio-leds-state { + tlmm_leds: tlmm-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; |