um: Remove obsolete legacy network transports

These legacy network transports were marked as obsolete in commit
40814b98a570 ("um: Mark non-vector net transports as obsolete").
More than five years have passed since then. Remove these network
transports to reduce the maintenance burden.

Suggested-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://patch.msgid.link/20250503051710.3286595-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

19 files changed, 1 insertions, 1995 deletions

diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
index d7bb447ff958..bc68c3e341f5 100644
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
@@ -143,99 +143,6 @@ config UML_NET
 	  enable at least one of the following transport options to actually
 	  make use of UML networking.
 
-config UML_NET_ETHERTAP
-	bool "Ethertap transport (obsolete)"
-	depends on UML_NET
-	help
-	  The Ethertap User-Mode Linux network transport allows a single
-	  running UML to exchange packets with its host over one of the
-	  host's Ethertap devices, such as /dev/tap0.  Additional running
-	  UMLs can use additional Ethertap devices, one per running UML.
-	  While the UML believes it's on a (multi-device, broadcast) virtual
-	  Ethernet network, it's in fact communicating over a point-to-point
-	  link with the host.
-
-	  To use this, your host kernel must have support for Ethertap
-	  devices.  Also, if your host kernel is 2.4.x, it must have
-	  CONFIG_NETLINK_DEV configured as Y or M.
-
-	  For more information, see
-	  <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
-	  has examples of the UML command line to use to enable Ethertap
-	  networking.
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-config UML_NET_TUNTAP
-	bool "TUN/TAP transport (obsolete)"
-	depends on UML_NET
-	help
-	  The UML TUN/TAP network transport allows a UML instance to exchange
-	  packets with the host over a TUN/TAP device.  This option will only
-	  work with a 2.4 host, unless you've applied the TUN/TAP patch to
-	  your 2.2 host kernel.
-
-	  To use this transport, your host kernel must have support for TUN/TAP
-	  devices, either built-in or as a module.
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-config UML_NET_SLIP
-	bool "SLIP transport (obsolete)"
-	depends on UML_NET
-	help
-	  The slip User-Mode Linux network transport allows a running UML to
-	  network with its host over a point-to-point link.  Unlike Ethertap,
-	  which can carry any Ethernet frame (and hence even non-IP packets),
-	  the slip transport can only carry IP packets.
-
-	  To use this, your host must support slip devices.
-
-	  For more information, see
-	  <http://user-mode-linux.sourceforge.net/old/networking.html>.
-	  has examples of the UML command line to use to enable slip
-	  networking, and details of a few quirks with it.
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-config UML_NET_DAEMON
-	bool "Daemon transport (obsolete)"
-	depends on UML_NET
-	help
-	  This User-Mode Linux network transport allows one or more running
-	  UMLs on a single host to communicate with each other, but not to
-	  the host.
-
-	  To use this form of networking, you'll need to run the UML
-	  networking daemon on the host.
-
-	  For more information, see
-	  <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
-	  has examples of the UML command line to use to enable Daemon
-	  networking.
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-config UML_NET_DAEMON_DEFAULT_SOCK
-	string "Default socket for daemon transport"
-	default "/tmp/uml.ctl"
-	depends on UML_NET_DAEMON
-	help
-	  This option allows setting the default socket for the daemon
-	  transport, normally it defaults to /tmp/uml.ctl.
-
 config UML_NET_VECTOR
 	bool "Vector I/O high performance network devices"
 	depends on UML_NET
@@ -248,83 +155,6 @@ config UML_NET_VECTOR
 	  with up to 4 times higher network throughput than the UML network
 	  drivers.
 
-config UML_NET_VDE
-	bool "VDE transport (obsolete)"
-	depends on UML_NET
-	depends on !MODVERSIONS
-	select MAY_HAVE_RUNTIME_DEPS
-	help
-	  This User-Mode Linux network transport allows one or more running
-	  UMLs on a single host to communicate with each other and also
-	  with the rest of the world using Virtual Distributed Ethernet,
-	  an improved fork of uml_switch.
-
-	  You must have libvdeplug installed in order to build the vde
-	  transport into UML.
-
-	  To use this form of networking, you will need to run vde_switch
-	  on the host.
-
-	  For more information, see <http://wiki.virtualsquare.org/>
-	  That site has a good overview of what VDE is and also examples
-	  of the UML command line to use to enable VDE networking.
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-config UML_NET_MCAST
-	bool "Multicast transport (obsolete)"
-	depends on UML_NET
-	help
-	  This Multicast User-Mode Linux network transport allows multiple
-	  UMLs (even ones running on different host machines!) to talk to
-	  each other over a virtual ethernet network.  However, it requires
-	  at least one UML with one of the other transports to act as a
-	  bridge if any of them need to be able to talk to their hosts or any
-	  other IP machines.
-
-	  To use this, your host kernel(s) must support IP Multicasting.
-
-	  For more information, see
-	  <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
-	  has examples of the UML command line to use to enable Multicast
-	  networking, and notes about the security of this approach.
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-config UML_NET_SLIRP
-	bool "SLiRP transport (obsolete)"
-	depends on UML_NET
-	help
-	  The SLiRP User-Mode Linux network transport allows a running UML
-	  to network by invoking a program that can handle SLIP encapsulated
-	  packets.  This is commonly (but not limited to) the application
-	  known as SLiRP, a program that can re-socket IP packets back onto
-	  he host on which it is run.  Only IP packets are supported,
-	  unlike other network transports that can handle all Ethernet
-	  frames.  In general, slirp allows the UML the same IP connectivity
-	  to the outside world that the host user is permitted, and unlike
-	  other transports, SLiRP works without the need of root level
-	  privileges, setuid binaries, or SLIP devices on the host.  This
-	  also means not every type of connection is possible, but most
-	  situations can be accommodated with carefully crafted slirp
-	  commands that can be passed along as part of the network device's
-	  setup string.  The effect of this transport on the UML is similar
-	  that of a host behind a firewall that masquerades all network
-	  connections passing through it (but is less secure).
-
-	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	  migrate to UML_NET_VECTOR.
-
-	  If unsure, say N.
-
-	  Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp"
-
 endmenu
 
 config VIRTIO_UML
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index 336be56b8975..6dfc2e9c0ce8 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -6,11 +6,7 @@
 # pcap is broken in 2.5 because kbuild doesn't allow pcap.a to be linked
 # in to pcap.o
 
-slip-objs := slip_kern.o slip_user.o
-slirp-objs := slirp_kern.o slirp_user.o
-daemon-objs := daemon_kern.o daemon_user.o
 vector-objs := vector_kern.o vector_user.o vector_transports.o
-umcast-objs := umcast_kern.o umcast_user.o
 net-objs := net_kern.o net_user.o
 mconsole-objs := mconsole_kern.o mconsole_user.o
 hostaudio-objs := hostaudio_kern.o
@@ -21,13 +17,6 @@ harddog-builtin-$(CONFIG_UML_WATCHDOG) := harddog_user.o harddog_user_exp.o
 rtc-objs := rtc_kern.o rtc_user.o
 vfio_uml-objs := vfio_kern.o vfio_user.o
 
-LDFLAGS_vde.o = $(shell $(CC) $(CFLAGS) -print-file-name=libvdeplug.a)
-
-targets := vde_kern.o vde_user.o
-
-$(obj)/vde.o: $(obj)/vde_kern.o $(obj)/vde_user.o
-	$(LD) -r -dp -o $@ $^ $(ld_flags)
-
 #XXX: The call below does not work because the flags are added before the
 # object name, so nothing from the library gets linked.
 #$(call if_changed,ld)
@@ -39,12 +28,7 @@ obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
 obj-$(CONFIG_SSL) += ssl.o
 obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
 
-obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
-obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
-obj-$(CONFIG_UML_NET_DAEMON) += daemon.o 
 obj-$(CONFIG_UML_NET_VECTOR) += vector.o
-obj-$(CONFIG_UML_NET_VDE) += vde.o
-obj-$(CONFIG_UML_NET_MCAST) += umcast.o
 obj-$(CONFIG_UML_NET) += net.o 
 obj-$(CONFIG_MCONSOLE) += mconsole.o
 obj-$(CONFIG_MMAPPER) += mmapper_kern.o 
@@ -66,7 +50,7 @@ obj-$(CONFIG_UML_PCI_OVER_VIRTIO) += virtio_pcidev.o
 obj-$(CONFIG_UML_PCI_OVER_VFIO) += vfio_uml.o
 
 # pcap_user.o must be added explicitly.
-USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o vde_user.o vector_user.o
+USER_OBJS := fd.o null.o pty.o tty.o xterm.o vector_user.o
 CFLAGS_null.o = -DDEV_NULL=$(DEV_NULL_PATH)
 
 CFLAGS_xterm.o += '-DCONFIG_XTERM_CHAN_DEFAULT_EMULATOR="$(CONFIG_XTERM_CHAN_DEFAULT_EMULATOR)"'
diff --git a/arch/um/drivers/daemon.h b/arch/um/drivers/daemon.h
deleted file mode 100644
index 1509cc7eb907..000000000000
--- a/arch/um/drivers/daemon.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#ifndef __DAEMON_H__
-#define __DAEMON_H__
-
-#include <net_user.h>
-
-#define SWITCH_VERSION 3
-
-struct daemon_data {
-	char *sock_type;
-	char *ctl_sock;
-	void *ctl_addr;
-	void *data_addr;
-	void *local_addr;
-	int fd;
-	int control;
-	void *dev;
-};
-
-extern const struct net_user_info daemon_user_info;
-
-extern int daemon_user_write(int fd, void *buf, int len,
-			     struct daemon_data *pri);
-
-#endif
diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c
deleted file mode 100644
index afde1e82c056..000000000000
--- a/arch/um/drivers/daemon_kern.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
- * James Leu (jleu@mindspring.net).
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Copyright (C) 2001 by various other people who didn't put their name here.
- */
-
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <net_kern.h>
-#include "daemon.h"
-
-struct daemon_init {
-	char *sock_type;
-	char *ctl_sock;
-};
-
-static void daemon_init(struct net_device *dev, void *data)
-{
-	struct uml_net_private *pri;
-	struct daemon_data *dpri;
-	struct daemon_init *init = data;
-
-	pri = netdev_priv(dev);
-	dpri = (struct daemon_data *) pri->user;
-	dpri->sock_type = init->sock_type;
-	dpri->ctl_sock = init->ctl_sock;
-	dpri->fd = -1;
-	dpri->control = -1;
-	dpri->dev = dev;
-	/* We will free this pointer. If it contains crap we're burned. */
-	dpri->ctl_addr = NULL;
-	dpri->data_addr = NULL;
-	dpri->local_addr = NULL;
-
-	printk("daemon backend (uml_switch version %d) - %s:%s",
-	       SWITCH_VERSION, dpri->sock_type, dpri->ctl_sock);
-	printk("\n");
-}
-
-static int daemon_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return net_recvfrom(fd, skb_mac_header(skb),
-			    skb->dev->mtu + ETH_HEADER_OTHER);
-}
-
-static int daemon_write(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return daemon_user_write(fd, skb->data, skb->len,
-				 (struct daemon_data *) &lp->user);
-}
-
-static const struct net_kern_info daemon_kern_info = {
-	.init			= daemon_init,
-	.protocol		= eth_protocol,
-	.read			= daemon_read,
-	.write			= daemon_write,
-};
-
-static int daemon_setup(char *str, char **mac_out, void *data)
-{
-	struct daemon_init *init = data;
-	char *remain;
-
-	*init = ((struct daemon_init)
-		{ .sock_type 		= "unix",
-		  .ctl_sock 		= CONFIG_UML_NET_DAEMON_DEFAULT_SOCK });
-
-	remain = split_if_spec(str, mac_out, &init->sock_type, &init->ctl_sock,
-			       NULL);
-	if (remain != NULL)
-		printk(KERN_WARNING "daemon_setup : Ignoring data socket "
-		       "specification\n");
-
-	return 1;
-}
-
-static struct transport daemon_transport = {
-	.list 		= LIST_HEAD_INIT(daemon_transport.list),
-	.name 		= "daemon",
-	.setup  	= daemon_setup,
-	.user 		= &daemon_user_info,
-	.kern 		= &daemon_kern_info,
-	.private_size 	= sizeof(struct daemon_data),
-	.setup_size 	= sizeof(struct daemon_init),
-};
-
-static int register_daemon(void)
-{
-	register_transport(&daemon_transport);
-	return 0;
-}
-
-late_initcall(register_daemon);
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
deleted file mode 100644
index 785baedc3555..000000000000
--- a/arch/um/drivers/daemon_user.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
- * James Leu (jleu@mindspring.net).
- * Copyright (C) 2001 by various other people who didn't put their name here.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/un.h>
-#include "daemon.h"
-#include <net_user.h>
-#include <os.h>
-#include <um_malloc.h>
-
-enum request_type { REQ_NEW_CONTROL };
-
-#define SWITCH_MAGIC 0xfeedface
-
-struct request_v3 {
-	uint32_t magic;
-	uint32_t version;
-	enum request_type type;
-	struct sockaddr_un sock;
-};
-
-static struct sockaddr_un *new_addr(void *name, int len)
-{
-	struct sockaddr_un *sun;
-
-	sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
-	if (sun == NULL) {
-		printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
-		       "failed\n");
-		return NULL;
-	}
-	sun->sun_family = AF_UNIX;
-	memcpy(sun->sun_path, name, len);
-	return sun;
-}
-
-static int connect_to_switch(struct daemon_data *pri)
-{
-	struct sockaddr_un *ctl_addr = pri->ctl_addr;
-	struct sockaddr_un *local_addr = pri->local_addr;
-	struct sockaddr_un *sun;
-	struct request_v3 req;
-	int fd, n, err;
-
-	pri->control = socket(AF_UNIX, SOCK_STREAM, 0);
-	if (pri->control < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "daemon_open : control socket failed, "
-		       "errno = %d\n", -err);
-		return err;
-	}
-
-	if (connect(pri->control, (struct sockaddr *) ctl_addr,
-		   sizeof(*ctl_addr)) < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "daemon_open : control connect failed, "
-		       "errno = %d\n", -err);
-		goto out;
-	}
-
-	fd = socket(AF_UNIX, SOCK_DGRAM, 0);
-	if (fd < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "daemon_open : data socket failed, "
-		       "errno = %d\n", -err);
-		goto out;
-	}
-	if (bind(fd, (struct sockaddr *) local_addr, sizeof(*local_addr)) < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "daemon_open : data bind failed, "
-		       "errno = %d\n", -err);
-		goto out_close;
-	}
-
-	sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
-	if (sun == NULL) {
-		printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
-		       "failed\n");
-		err = -ENOMEM;
-		goto out_close;
-	}
-
-	req.magic = SWITCH_MAGIC;
-	req.version = SWITCH_VERSION;
-	req.type = REQ_NEW_CONTROL;
-	req.sock = *local_addr;
-	n = write(pri->control, &req, sizeof(req));
-	if (n != sizeof(req)) {
-		printk(UM_KERN_ERR "daemon_open : control setup request "
-		       "failed, err = %d\n", -errno);
-		err = -ENOTCONN;
-		goto out_free;
-	}
-
-	n = read(pri->control, sun, sizeof(*sun));
-	if (n != sizeof(*sun)) {
-		printk(UM_KERN_ERR "daemon_open : read of data socket failed, "
-		       "err = %d\n", -errno);
-		err = -ENOTCONN;
-		goto out_free;
-	}
-
-	pri->data_addr = sun;
-	return fd;
-
- out_free:
-	kfree(sun);
- out_close:
-	close(fd);
- out:
-	close(pri->control);
-	return err;
-}
-
-static int daemon_user_init(void *data, void *dev)
-{
-	struct daemon_data *pri = data;
-	struct timeval tv;
-	struct {
-		char zero;
-		int pid;
-		int usecs;
-	} name;
-
-	if (!strcmp(pri->sock_type, "unix"))
-		pri->ctl_addr = new_addr(pri->ctl_sock,
-					 strlen(pri->ctl_sock) + 1);
-	name.zero = 0;
-	name.pid = os_getpid();
-	gettimeofday(&tv, NULL);
-	name.usecs = tv.tv_usec;
-	pri->local_addr = new_addr(&name, sizeof(name));
-	pri->dev = dev;
-	pri->fd = connect_to_switch(pri);
-	if (pri->fd < 0) {
-		kfree(pri->local_addr);
-		pri->local_addr = NULL;
-		return pri->fd;
-	}
-
-	return 0;
-}
-
-static int daemon_open(void *data)
-{
-	struct daemon_data *pri = data;
-	return pri->fd;
-}
-
-static void daemon_remove(void *data)
-{
-	struct daemon_data *pri = data;
-
-	close(pri->fd);
-	pri->fd = -1;
-	close(pri->control);
-	pri->control = -1;
-
-	kfree(pri->data_addr);
-	pri->data_addr = NULL;
-	kfree(pri->ctl_addr);
-	pri->ctl_addr = NULL;
-	kfree(pri->local_addr);
-	pri->local_addr = NULL;
-}
-
-int daemon_user_write(int fd, void *buf, int len, struct daemon_data *pri)
-{
-	struct sockaddr_un *data_addr = pri->data_addr;
-
-	return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr));
-}
-
-const struct net_user_info daemon_user_info = {
-	.init		= daemon_user_init,
-	.open		= daemon_open,
-	.close	 	= NULL,
-	.remove	 	= daemon_remove,
-	.add_address	= NULL,
-	.delete_address = NULL,
-	.mtu		= ETH_MAX_PACKET,
-	.max_packet	= ETH_MAX_PACKET + ETH_HEADER_OTHER,
-};
diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h
deleted file mode 100644
index 0f3b7ca99465..000000000000
--- a/arch/um/drivers/slip.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __UM_SLIP_H
-#define __UM_SLIP_H
-
-#include "slip_common.h"
-
-struct slip_data {
-	void *dev;
-	char name[sizeof("slnnnnn\0")];
-	char *addr;
-	char *gate_addr;
-	int slave;
-	struct slip_proto slip;
-};
-
-extern const struct net_user_info slip_user_info;
-
-extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri);
-extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri);
-
-#endif
diff --git a/arch/um/drivers/slip_common.c b/arch/um/drivers/slip_common.c
deleted file mode 100644
index 20fe4f42743d..000000000000
--- a/arch/um/drivers/slip_common.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <string.h>
-#include "slip_common.h"
-#include <net_user.h>
-
-int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip)
-{
-	int i, n, size, start;
-
-	if(slip->more > 0){
-		i = 0;
-		while(i < slip->more){
-			size = slip_unesc(slip->ibuf[i++], slip->ibuf,
-					  &slip->pos, &slip->esc);
-			if(size){
-				memcpy(buf, slip->ibuf, size);
-				memmove(slip->ibuf, &slip->ibuf[i],
-					slip->more - i);
-				slip->more = slip->more - i;
-				return size;
-			}
-		}
-		slip->more = 0;
-	}
-
-	n = net_read(fd, &slip->ibuf[slip->pos],
-		     sizeof(slip->ibuf) - slip->pos);
-	if(n <= 0)
-		return n;
-
-	start = slip->pos;
-	for(i = 0; i < n; i++){
-		size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos,
-				  &slip->esc);
-		if(size){
-			memcpy(buf, slip->ibuf, size);
-			memmove(slip->ibuf, &slip->ibuf[start+i+1],
-				n - (i + 1));
-			slip->more = n - (i + 1);
-			return size;
-		}
-	}
-	return 0;
-}
-
-int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip)
-{
-	int actual, n;
-
-	actual = slip_esc(buf, slip->obuf, len);
-	n = net_write(fd, slip->obuf, actual);
-	if(n < 0)
-		return n;
-	else return len;
-}
diff --git a/arch/um/drivers/slip_common.h b/arch/um/drivers/slip_common.h
deleted file mode 100644
index d3798b5caf7f..000000000000
--- a/arch/um/drivers/slip_common.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __UM_SLIP_COMMON_H
-#define __UM_SLIP_COMMON_H
-
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars +  *
-  * terminating END char + initial END char                            */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
-
-/* SLIP protocol characters. */
-#define SLIP_END             0300	/* indicates end of frame	*/
-#define SLIP_ESC             0333	/* indicates byte stuffing	*/
-#define SLIP_ESC_END         0334	/* ESC ESC_END means END 'data'	*/
-#define SLIP_ESC_ESC         0335	/* ESC ESC_ESC means ESC 'data'	*/
-
-static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos,
-                             int *esc)
-{
-	int ret;
-
-	switch(c){
-	case SLIP_END:
-		*esc = 0;
-		ret=*pos;
-		*pos=0;
-		return(ret);
-	case SLIP_ESC:
-		*esc = 1;
-		return(0);
-	case SLIP_ESC_ESC:
-		if(*esc){
-			*esc = 0;
-			c = SLIP_ESC;
-		}
-		break;
-	case SLIP_ESC_END:
-		if(*esc){
-			*esc = 0;
-			c = SLIP_END;
-		}
-		break;
-	}
-	buf[(*pos)++] = c;
-	return(0);
-}
-
-static inline int slip_esc(unsigned char *s, unsigned char *d, int len)
-{
-	unsigned char *ptr = d;
-	unsigned char c;
-
-	/*
-	 * Send an initial END character to flush out any
-	 * data that may have accumulated in the receiver
-	 * due to line noise.
-	 */
-
-	*ptr++ = SLIP_END;
-
-	/*
-	 * For each byte in the packet, send the appropriate
-	 * character sequence, according to the SLIP protocol.
-	 */
-
-	while (len-- > 0) {
-		switch(c = *s++) {
-		case SLIP_END:
-			*ptr++ = SLIP_ESC;
-			*ptr++ = SLIP_ESC_END;
-			break;
-		case SLIP_ESC:
-			*ptr++ = SLIP_ESC;
-			*ptr++ = SLIP_ESC_ESC;
-			break;
-		default:
-			*ptr++ = c;
-			break;
-		}
-	}
-	*ptr++ = SLIP_END;
-	return (ptr - d);
-}
-
-struct slip_proto {
-	unsigned char ibuf[ENC_BUF_SIZE];
-	unsigned char obuf[ENC_BUF_SIZE];
-	int more; /* more data: do not read fd until ibuf has been drained */
-	int pos;
-	int esc;
-};
-
-static inline void slip_proto_init(struct slip_proto * slip)
-{
-	memset(slip->ibuf, 0, sizeof(slip->ibuf));
-	memset(slip->obuf, 0, sizeof(slip->obuf));
-	slip->more = 0;
-	slip->pos = 0;
-	slip->esc = 0;
-}
-
-extern int slip_proto_read(int fd, void *buf, int len,
-			   struct slip_proto *slip);
-extern int slip_proto_write(int fd, void *buf, int len,
-			    struct slip_proto *slip);
-
-#endif
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
deleted file mode 100644
index c58ccdcc16d6..000000000000
--- a/arch/um/drivers/slip_kern.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <net_kern.h>
-#include "slip.h"
-
-struct slip_init {
-	char *gate_addr;
-};
-
-static void slip_init(struct net_device *dev, void *data)
-{
-	struct uml_net_private *private;
-	struct slip_data *spri;
-	struct slip_init *init = data;
-
-	private = netdev_priv(dev);
-	spri = (struct slip_data *) private->user;
-
-	memset(spri->name, 0, sizeof(spri->name));
-	spri->addr = NULL;
-	spri->gate_addr = init->gate_addr;
-	spri->slave = -1;
-	spri->dev = dev;
-
-	slip_proto_init(&spri->slip);
-
-	dev->hard_header_len = 0;
-	dev->header_ops = NULL;
-	dev->addr_len = 0;
-	dev->type = ARPHRD_SLIP;
-	dev->tx_queue_len = 256;
-	dev->flags = IFF_NOARP;
-	printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr);
-}
-
-static unsigned short slip_protocol(struct sk_buff *skbuff)
-{
-	return htons(ETH_P_IP);
-}
-
-static int slip_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return slip_user_read(fd, skb_mac_header(skb), skb->dev->mtu,
-			      (struct slip_data *) &lp->user);
-}
-
-static int slip_write(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return slip_user_write(fd, skb->data, skb->len,
-			       (struct slip_data *) &lp->user);
-}
-
-static const struct net_kern_info slip_kern_info = {
-	.init			= slip_init,
-	.protocol		= slip_protocol,
-	.read			= slip_read,
-	.write			= slip_write,
-};
-
-static int slip_setup(char *str, char **mac_out, void *data)
-{
-	struct slip_init *init = data;
-
-	*init = ((struct slip_init) { .gate_addr = NULL });
-
-	if (str[0] != '\0')
-		init->gate_addr = str;
-	return 1;
-}
-
-static struct transport slip_transport = {
-	.list 		= LIST_HEAD_INIT(slip_transport.list),
-	.name 		= "slip",
-	.setup  	= slip_setup,
-	.user 		= &slip_user_info,
-	.kern 		= &slip_kern_info,
-	.private_size 	= sizeof(struct slip_data),
-	.setup_size 	= sizeof(struct slip_init),
-};
-
-static int register_slip(void)
-{
-	register_transport(&slip_transport);
-	return 0;
-}
-
-late_initcall(register_slip);
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
deleted file mode 100644
index 7334019c9e60..000000000000
--- a/arch/um/drivers/slip_user.c
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <string.h>
-#include <termios.h>
-#include <sys/wait.h>
-#include <net_user.h>
-#include <os.h>
-#include "slip.h"
-#include <um_malloc.h>
-
-static int slip_user_init(void *data, void *dev)
-{
-	struct slip_data *pri = data;
-
-	pri->dev = dev;
-	return 0;
-}
-
-static int set_up_tty(int fd)
-{
-	int i;
-	struct termios tios;
-
-	if (tcgetattr(fd, &tios) < 0) {
-		printk(UM_KERN_ERR "could not get initial terminal "
-		       "attributes\n");
-		return -1;
-	}
-
-	tios.c_cflag = CS8 | CREAD | HUPCL | CLOCAL;
-	tios.c_iflag = IGNBRK | IGNPAR;
-	tios.c_oflag = 0;
-	tios.c_lflag = 0;
-	for (i = 0; i < NCCS; i++)
-		tios.c_cc[i] = 0;
-	tios.c_cc[VMIN] = 1;
-	tios.c_cc[VTIME] = 0;
-
-	cfsetospeed(&tios, B38400);
-	cfsetispeed(&tios, B38400);
-
-	if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) {
-		printk(UM_KERN_ERR "failed to set terminal attributes\n");
-		return -1;
-	}
-	return 0;
-}
-
-struct slip_pre_exec_data {
-	int stdin_fd;
-	int stdout_fd;
-	int close_me;
-};
-
-static void slip_pre_exec(void *arg)
-{
-	struct slip_pre_exec_data *data = arg;
-
-	if (data->stdin_fd >= 0)
-		dup2(data->stdin_fd, 0);
-	dup2(data->stdout_fd, 1);
-	if (data->close_me >= 0)
-		close(data->close_me);
-}
-
-static int slip_tramp(char **argv, int fd)
-{
-	struct slip_pre_exec_data pe_data;
-	char *output;
-	int pid, fds[2], err, output_len;
-
-	err = os_pipe(fds, 1, 0);
-	if (err < 0) {
-		printk(UM_KERN_ERR "slip_tramp : pipe failed, err = %d\n",
-		       -err);
-		goto out;
-	}
-
-	err = 0;
-	pe_data.stdin_fd = fd;
-	pe_data.stdout_fd = fds[1];
-	pe_data.close_me = fds[0];
-	err = run_helper(slip_pre_exec, &pe_data, argv);
-	if (err < 0)
-		goto out_close;
-	pid = err;
-
-	output_len = UM_KERN_PAGE_SIZE;
-	output = uml_kmalloc(output_len, UM_GFP_KERNEL);
-	if (output == NULL) {
-		printk(UM_KERN_ERR "slip_tramp : failed to allocate output "
-		       "buffer\n");
-		os_kill_process(pid, 1);
-		err = -ENOMEM;
-		goto out_close;
-	}
-
-	close(fds[1]);
-	read_output(fds[0], output, output_len);
-	printk("%s", output);
-
-	err = helper_wait(pid);
-	close(fds[0]);
-
-	kfree(output);
-	return err;
-
-out_close:
-	close(fds[0]);
-	close(fds[1]);
-out:
-	return err;
-}
-
-static int slip_open(void *data)
-{
-	struct slip_data *pri = data;
-	char version_buf[sizeof("nnnnn\0")];
-	char gate_buf[sizeof("nnn.nnn.nnn.nnn\0")];
-	char *argv[] = { "uml_net", version_buf, "slip", "up", gate_buf,
-			 NULL };
-	int sfd, mfd, err;
-
-	err = get_pty();
-	if (err < 0) {
-		printk(UM_KERN_ERR "slip-open : Failed to open pty, err = %d\n",
-		       -err);
-		goto out;
-	}
-	mfd = err;
-
-	err = open(ptsname(mfd), O_RDWR, 0);
-	if (err < 0) {
-		printk(UM_KERN_ERR "Couldn't open tty for slip line, "
-		       "err = %d\n", -err);
-		goto out_close;
-	}
-	sfd = err;
-
-	err = set_up_tty(sfd);
-	if (err)
-		goto out_close2;
-
-	pri->slave = sfd;
-	pri->slip.pos = 0;
-	pri->slip.esc = 0;
-	if (pri->gate_addr != NULL) {
-		sprintf(version_buf, "%d", UML_NET_VERSION);
-		strcpy(gate_buf, pri->gate_addr);
-
-		err = slip_tramp(argv, sfd);
-
-		if (err < 0) {
-			printk(UM_KERN_ERR "slip_tramp failed - err = %d\n",
-			       -err);
-			goto out_close2;
-		}
-		err = os_get_ifname(pri->slave, pri->name);
-		if (err < 0) {
-			printk(UM_KERN_ERR "get_ifname failed, err = %d\n",
-			       -err);
-			goto out_close2;
-		}
-		iter_addresses(pri->dev, open_addr, pri->name);
-	}
-	else {
-		err = os_set_slip(sfd);
-		if (err < 0) {
-			printk(UM_KERN_ERR "Failed to set slip discipline "
-			       "encapsulation - err = %d\n", -err);
-			goto out_close2;
-		}
-	}
-	return mfd;
-out_close2:
-	close(sfd);
-out_close:
-	close(mfd);
-out:
-	return err;
-}
-
-static void slip_close(int fd, void *data)
-{
-	struct slip_data *pri = data;
-	char version_buf[sizeof("nnnnn\0")];
-	char *argv[] = { "uml_net", version_buf, "slip", "down", pri->name,
-			 NULL };
-	int err;
-
-	if (pri->gate_addr != NULL)
-		iter_addresses(pri->dev, close_addr, pri->name);
-
-	sprintf(version_buf, "%d", UML_NET_VERSION);
-
-	err = slip_tramp(argv, pri->slave);
-
-	if (err != 0)
-		printk(UM_KERN_ERR "slip_tramp failed - errno = %d\n", -err);
-	close(fd);
-	close(pri->slave);
-	pri->slave = -1;
-}
-
-int slip_user_read(int fd, void *buf, int len, struct slip_data *pri)
-{
-	return slip_proto_read(fd, buf, len, &pri->slip);
-}
-
-int slip_user_write(int fd, void *buf, int len, struct slip_data *pri)
-{
-	return slip_proto_write(fd, buf, len, &pri->slip);
-}
-
-static void slip_add_addr(unsigned char *addr, unsigned char *netmask,
-			  void *data)
-{
-	struct slip_data *pri = data;
-
-	if (pri->slave < 0)
-		return;
-	open_addr(addr, netmask, pri->name);
-}
-
-static void slip_del_addr(unsigned char *addr, unsigned char *netmask,
-			    void *data)
-{
-	struct slip_data *pri = data;
-
-	if (pri->slave < 0)
-		return;
-	close_addr(addr, netmask, pri->name);
-}
-
-const struct net_user_info slip_user_info = {
-	.init		= slip_user_init,
-	.open		= slip_open,
-	.close	 	= slip_close,
-	.remove	 	= NULL,
-	.add_address	= slip_add_addr,
-	.delete_address = slip_del_addr,
-	.mtu		= BUF_SIZE,
-	.max_packet	= BUF_SIZE,
-};
diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h
deleted file mode 100644
index 4aef2b88249a..000000000000
--- a/arch/um/drivers/slirp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __UM_SLIRP_H
-#define __UM_SLIRP_H
-
-#include "slip_common.h"
-
-#define SLIRP_MAX_ARGS 100
-/*
- * XXX this next definition is here because I don't understand why this
- * initializer doesn't work in slirp_kern.c:
- *
- *   argv :  { init->argv[ 0 ... SLIRP_MAX_ARGS-1 ] },
- *
- * or why I can't typecast like this:
- *
- *   argv :  (char* [SLIRP_MAX_ARGS])(init->argv), 
- */
-struct arg_list_dummy_wrapper { char *argv[SLIRP_MAX_ARGS]; };
-
-struct slirp_data {
-	void *dev;
-	struct arg_list_dummy_wrapper argw;
-	int pid;
-	int slave;
-	struct slip_proto slip;
-};
-
-extern const struct net_user_info slirp_user_info;
-
-extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri);
-extern int slirp_user_write(int fd, void *buf, int len,
-			    struct slirp_data *pri);
-
-#endif
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
deleted file mode 100644
index 0a6151ee9572..000000000000
--- a/arch/um/drivers/slirp_kern.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#include <linux/if_arp.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/string.h>
-#include <net_kern.h>
-#include <net_user.h>
-#include "slirp.h"
-
-struct slirp_init {
-	struct arg_list_dummy_wrapper argw;  /* XXX should be simpler... */
-};
-
-static void slirp_init(struct net_device *dev, void *data)
-{
-	struct uml_net_private *private;
-	struct slirp_data *spri;
-	struct slirp_init *init = data;
-	int i;
-
-	private = netdev_priv(dev);
-	spri = (struct slirp_data *) private->user;
-
-	spri->argw = init->argw;
-	spri->pid = -1;
-	spri->slave = -1;
-	spri->dev = dev;
-
-	slip_proto_init(&spri->slip);
-
-	dev->hard_header_len = 0;
-	dev->header_ops = NULL;
-	dev->addr_len = 0;
-	dev->type = ARPHRD_SLIP;
-	dev->tx_queue_len = 256;
-	dev->flags = IFF_NOARP;
-	printk("SLIRP backend - command line:");
-	for (i = 0; spri->argw.argv[i] != NULL; i++)
-		printk(" '%s'",spri->argw.argv[i]);
-	printk("\n");
-}
-
-static unsigned short slirp_protocol(struct sk_buff *skbuff)
-{
-	return htons(ETH_P_IP);
-}
-
-static int slirp_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return slirp_user_read(fd, skb_mac_header(skb), skb->dev->mtu,
-			       (struct slirp_data *) &lp->user);
-}
-
-static int slirp_write(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return slirp_user_write(fd, skb->data, skb->len,
-				(struct slirp_data *) &lp->user);
-}
-
-const struct net_kern_info slirp_kern_info = {
-	.init			= slirp_init,
-	.protocol		= slirp_protocol,
-	.read			= slirp_read,
-	.write			= slirp_write,
-};
-
-static int slirp_setup(char *str, char **mac_out, void *data)
-{
-	struct slirp_init *init = data;
-	int i=0;
-
-	*init = ((struct slirp_init) { .argw = { { "slirp", NULL  } } });
-
-	str = split_if_spec(str, mac_out, NULL);
-
-	if (str == NULL) /* no command line given after MAC addr */
-		return 1;
-
-	do {
-		if (i >= SLIRP_MAX_ARGS - 1) {
-			printk(KERN_WARNING "slirp_setup: truncating slirp "
-			       "arguments\n");
-			break;
-		}
-		init->argw.argv[i++] = str;
-		while(*str && *str!=',') {
-			if (*str == '_')
-				*str=' ';
-			str++;
-		}
-		if (*str != ',')
-			break;
-		*str++ = '\0';
-	} while (1);
-
-	init->argw.argv[i] = NULL;
-	return 1;
-}
-
-static struct transport slirp_transport = {
-	.list 		= LIST_HEAD_INIT(slirp_transport.list),
-	.name 		= "slirp",
-	.setup  	= slirp_setup,
-	.user 		= &slirp_user_info,
-	.kern 		= &slirp_kern_info,
-	.private_size 	= sizeof(struct slirp_data),
-	.setup_size 	= sizeof(struct slirp_init),
-};
-
-static int register_slirp(void)
-{
-	register_transport(&slirp_transport);
-	return 0;
-}
-
-late_initcall(register_slirp);
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
deleted file mode 100644
index 97228aa080cb..000000000000
--- a/arch/um/drivers/slirp_user.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#include <unistd.h>
-#include <errno.h>
-#include <string.h>
-#include <sys/wait.h>
-#include <net_user.h>
-#include <os.h>
-#include "slirp.h"
-
-static int slirp_user_init(void *data, void *dev)
-{
-	struct slirp_data *pri = data;
-
-	pri->dev = dev;
-	return 0;
-}
-
-struct slirp_pre_exec_data {
-	int stdin_fd;
-	int stdout_fd;
-};
-
-static void slirp_pre_exec(void *arg)
-{
-	struct slirp_pre_exec_data *data = arg;
-
-	if (data->stdin_fd != -1)
-		dup2(data->stdin_fd, 0);
-	if (data->stdout_fd != -1)
-		dup2(data->stdout_fd, 1);
-}
-
-static int slirp_tramp(char **argv, int fd)
-{
-	struct slirp_pre_exec_data pe_data;
-	int pid;
-
-	pe_data.stdin_fd = fd;
-	pe_data.stdout_fd = fd;
-	pid = run_helper(slirp_pre_exec, &pe_data, argv);
-
-	return pid;
-}
-
-static int slirp_open(void *data)
-{
-	struct slirp_data *pri = data;
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if (err)
-		return err;
-
-	err = slirp_tramp(pri->argw.argv, fds[1]);
-	if (err < 0) {
-		printk(UM_KERN_ERR "slirp_tramp failed - errno = %d\n", -err);
-		goto out;
-	}
-
-	pri->slave = fds[1];
-	pri->slip.pos = 0;
-	pri->slip.esc = 0;
-	pri->pid = err;
-
-	return fds[0];
-out:
-	close(fds[0]);
-	close(fds[1]);
-	return err;
-}
-
-static void slirp_close(int fd, void *data)
-{
-	struct slirp_data *pri = data;
-	int err;
-
-	close(fd);
-	close(pri->slave);
-
-	pri->slave = -1;
-
-	if (pri->pid<1) {
-		printk(UM_KERN_ERR "slirp_close: no child process to shut "
-		       "down\n");
-		return;
-	}
-
-#if 0
-	if (kill(pri->pid, SIGHUP)<0) {
-		printk(UM_KERN_ERR "slirp_close: sending hangup to %d failed "
-		       "(%d)\n", pri->pid, errno);
-	}
-#endif
-	err = helper_wait(pri->pid);
-	if (err < 0)
-		return;
-
-	pri->pid = -1;
-}
-
-int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri)
-{
-	return slip_proto_read(fd, buf, len, &pri->slip);
-}
-
-int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri)
-{
-	return slip_proto_write(fd, buf, len, &pri->slip);
-}
-
-const struct net_user_info slirp_user_info = {
-	.init		= slirp_user_init,
-	.open		= slirp_open,
-	.close	 	= slirp_close,
-	.remove	 	= NULL,
-	.add_address	= NULL,
-	.delete_address = NULL,
-	.mtu		= BUF_SIZE,
-	.max_packet	= BUF_SIZE,
-};
diff --git a/arch/um/drivers/umcast.h b/arch/um/drivers/umcast.h
deleted file mode 100644
index fe39bee1e3bd..000000000000
--- a/arch/um/drivers/umcast.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- */
-
-#ifndef __DRIVERS_UMCAST_H
-#define __DRIVERS_UMCAST_H
-
-#include <net_user.h>
-
-struct umcast_data {
-	char *addr;
-	unsigned short lport;
-	unsigned short rport;
-	void *listen_addr;
-	void *remote_addr;
-	int ttl;
-	int unicast;
-	void *dev;
-};
-
-extern const struct net_user_info umcast_user_info;
-
-extern int umcast_user_write(int fd, void *buf, int len,
-			     struct umcast_data *pri);
-
-#endif
diff --git a/arch/um/drivers/umcast_kern.c b/arch/um/drivers/umcast_kern.c
deleted file mode 100644
index 595a54f2b9c6..000000000000
--- a/arch/um/drivers/umcast_kern.c
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * user-mode-linux networking multicast transport
- * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org>
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * based on the existing uml-networking code, which is
- * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
- * James Leu (jleu@mindspring.net).
- * Copyright (C) 2001 by various other people who didn't put their name here.
- *
- */
-
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include "umcast.h"
-#include <net_kern.h>
-
-struct umcast_init {
-	char *addr;
-	int lport;
-	int rport;
-	int ttl;
-	bool unicast;
-};
-
-static void umcast_init(struct net_device *dev, void *data)
-{
-	struct uml_net_private *pri;
-	struct umcast_data *dpri;
-	struct umcast_init *init = data;
-
-	pri = netdev_priv(dev);
-	dpri = (struct umcast_data *) pri->user;
-	dpri->addr = init->addr;
-	dpri->lport = init->lport;
-	dpri->rport = init->rport;
-	dpri->unicast = init->unicast;
-	dpri->ttl = init->ttl;
-	dpri->dev = dev;
-
-	if (dpri->unicast) {
-		printk(KERN_INFO "ucast backend address: %s:%u listen port: "
-		       "%u\n", dpri->addr, dpri->rport, dpri->lport);
-	} else {
-		printk(KERN_INFO "mcast backend multicast address: %s:%u, "
-		       "TTL:%u\n", dpri->addr, dpri->lport, dpri->ttl);
-	}
-}
-
-static int umcast_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return net_recvfrom(fd, skb_mac_header(skb),
-			    skb->dev->mtu + ETH_HEADER_OTHER);
-}
-
-static int umcast_write(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	return umcast_user_write(fd, skb->data, skb->len,
-				(struct umcast_data *) &lp->user);
-}
-
-static const struct net_kern_info umcast_kern_info = {
-	.init			= umcast_init,
-	.protocol		= eth_protocol,
-	.read			= umcast_read,
-	.write			= umcast_write,
-};
-
-static int mcast_setup(char *str, char **mac_out, void *data)
-{
-	struct umcast_init *init = data;
-	char *port_str = NULL, *ttl_str = NULL, *remain;
-	char *last;
-
-	*init = ((struct umcast_init)
-		{ .addr	= "239.192.168.1",
-		  .lport	= 1102,
-		  .ttl	= 1 });
-
-	remain = split_if_spec(str, mac_out, &init->addr, &port_str, &ttl_str,
-			       NULL);
-	if (remain != NULL) {
-		printk(KERN_ERR "mcast_setup - Extra garbage on "
-		       "specification : '%s'\n", remain);
-		return 0;
-	}
-
-	if (port_str != NULL) {
-		init->lport = simple_strtoul(port_str, &last, 10);
-		if ((*last != '\0') || (last == port_str)) {
-			printk(KERN_ERR "mcast_setup - Bad port : '%s'\n",
-			       port_str);
-			return 0;
-		}
-	}
-
-	if (ttl_str != NULL) {
-		init->ttl = simple_strtoul(ttl_str, &last, 10);
-		if ((*last != '\0') || (last == ttl_str)) {
-			printk(KERN_ERR "mcast_setup - Bad ttl : '%s'\n",
-			       ttl_str);
-			return 0;
-		}
-	}
-
-	init->unicast = false;
-	init->rport = init->lport;
-
-	printk(KERN_INFO "Configured mcast device: %s:%u-%u\n", init->addr,
-	       init->lport, init->ttl);
-
-	return 1;
-}
-
-static int ucast_setup(char *str, char **mac_out, void *data)
-{
-	struct umcast_init *init = data;
-	char *lport_str = NULL, *rport_str = NULL, *remain;
-	char *last;
-
-	*init = ((struct umcast_init)
-		{ .addr		= "",
-		  .lport	= 1102,
-		  .rport	= 1102 });
-
-	remain = split_if_spec(str, mac_out, &init->addr,
-			       &lport_str, &rport_str, NULL);
-	if (remain != NULL) {
-		printk(KERN_ERR "ucast_setup - Extra garbage on "
-		       "specification : '%s'\n", remain);
-		return 0;
-	}
-
-	if (lport_str != NULL) {
-		init->lport = simple_strtoul(lport_str, &last, 10);
-		if ((*last != '\0') || (last == lport_str)) {
-			printk(KERN_ERR "ucast_setup - Bad listen port : "
-			       "'%s'\n", lport_str);
-			return 0;
-		}
-	}
-
-	if (rport_str != NULL) {
-		init->rport = simple_strtoul(rport_str, &last, 10);
-		if ((*last != '\0') || (last == rport_str)) {
-			printk(KERN_ERR "ucast_setup - Bad remote port : "
-			       "'%s'\n", rport_str);
-			return 0;
-		}
-	}
-
-	init->unicast = true;
-
-	printk(KERN_INFO "Configured ucast device: :%u -> %s:%u\n",
-	       init->lport, init->addr, init->rport);
-
-	return 1;
-}
-
-static struct transport mcast_transport = {
-	.list	= LIST_HEAD_INIT(mcast_transport.list),
-	.name	= "mcast",
-	.setup	= mcast_setup,
-	.user	= &umcast_user_info,
-	.kern	= &umcast_kern_info,
-	.private_size	= sizeof(struct umcast_data),
-	.setup_size	= sizeof(struct umcast_init),
-};
-
-static struct transport ucast_transport = {
-	.list	= LIST_HEAD_INIT(ucast_transport.list),
-	.name	= "ucast",
-	.setup	= ucast_setup,
-	.user	= &umcast_user_info,
-	.kern	= &umcast_kern_info,
-	.private_size	= sizeof(struct umcast_data),
-	.setup_size	= sizeof(struct umcast_init),
-};
-
-static int register_umcast(void)
-{
-	register_transport(&mcast_transport);
-	register_transport(&ucast_transport);
-	return 0;
-}
-
-late_initcall(register_umcast);
diff --git a/arch/um/drivers/umcast_user.c b/arch/um/drivers/umcast_user.c
deleted file mode 100644
index b50b13cff04e..000000000000
--- a/arch/um/drivers/umcast_user.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * user-mode-linux networking multicast transport
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org>
- *
- * based on the existing uml-networking code, which is
- * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
- * James Leu (jleu@mindspring.net).
- * Copyright (C) 2001 by various other people who didn't put their name here.
- *
- *
- */
-
-#include <unistd.h>
-#include <errno.h>
-#include <netinet/in.h>
-#include "umcast.h"
-#include <net_user.h>
-#include <um_malloc.h>
-
-static struct sockaddr_in *new_addr(char *addr, unsigned short port)
-{
-	struct sockaddr_in *sin;
-
-	sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
-	if (sin == NULL) {
-		printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in "
-		       "failed\n");
-		return NULL;
-	}
-	sin->sin_family = AF_INET;
-	if (addr)
-		sin->sin_addr.s_addr = in_aton(addr);
-	else
-		sin->sin_addr.s_addr = INADDR_ANY;
-	sin->sin_port = htons(port);
-	return sin;
-}
-
-static int umcast_user_init(void *data, void *dev)
-{
-	struct umcast_data *pri = data;
-
-	pri->remote_addr = new_addr(pri->addr, pri->rport);
-	if (pri->unicast)
-		pri->listen_addr = new_addr(NULL, pri->lport);
-	else
-		pri->listen_addr = pri->remote_addr;
-	pri->dev = dev;
-	return 0;
-}
-
-static void umcast_remove(void *data)
-{
-	struct umcast_data *pri = data;
-
-	kfree(pri->listen_addr);
-	if (pri->unicast)
-		kfree(pri->remote_addr);
-	pri->listen_addr = pri->remote_addr = NULL;
-}
-
-static int umcast_open(void *data)
-{
-	struct umcast_data *pri = data;
-	struct sockaddr_in *lsin = pri->listen_addr;
-	struct sockaddr_in *rsin = pri->remote_addr;
-	struct ip_mreq mreq;
-	int fd, yes = 1, err = -EINVAL;
-
-
-	if ((!pri->unicast && lsin->sin_addr.s_addr == 0) ||
-	    (rsin->sin_addr.s_addr == 0) ||
-	    (lsin->sin_port == 0) || (rsin->sin_port == 0))
-		goto out;
-
-	fd = socket(AF_INET, SOCK_DGRAM, 0);
-
-	if (fd < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "umcast_open : data socket failed, "
-		       "errno = %d\n", errno);
-		goto out;
-	}
-
-	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "umcast_open: SO_REUSEADDR failed, "
-		       "errno = %d\n", errno);
-		goto out_close;
-	}
-
-	if (!pri->unicast) {
-		/* set ttl according to config */
-		if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl,
-			       sizeof(pri->ttl)) < 0) {
-			err = -errno;
-			printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_TTL "
-			       "failed, error = %d\n", errno);
-			goto out_close;
-		}
-
-		/* set LOOP, so data does get fed back to local sockets */
-		if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP,
-			       &yes, sizeof(yes)) < 0) {
-			err = -errno;
-			printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_LOOP "
-			       "failed, error = %d\n", errno);
-			goto out_close;
-		}
-	}
-
-	/* bind socket to the address */
-	if (bind(fd, (struct sockaddr *) lsin, sizeof(*lsin)) < 0) {
-		err = -errno;
-		printk(UM_KERN_ERR "umcast_open : data bind failed, "
-		       "errno = %d\n", errno);
-		goto out_close;
-	}
-
-	if (!pri->unicast) {
-		/* subscribe to the multicast group */
-		mreq.imr_multiaddr.s_addr = lsin->sin_addr.s_addr;
-		mreq.imr_interface.s_addr = 0;
-		if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP,
-			       &mreq, sizeof(mreq)) < 0) {
-			err = -errno;
-			printk(UM_KERN_ERR "umcast_open: IP_ADD_MEMBERSHIP "
-			       "failed, error = %d\n", errno);
-			printk(UM_KERN_ERR "There appears not to be a "
-			       "multicast-capable network interface on the "
-			       "host.\n");
-			printk(UM_KERN_ERR "eth0 should be configured in order "
-			       "to use the multicast transport.\n");
-			goto out_close;
-		}
-	}
-
-	return fd;
-
- out_close:
-	close(fd);
- out:
-	return err;
-}
-
-static void umcast_close(int fd, void *data)
-{
-	struct umcast_data *pri = data;
-
-	if (!pri->unicast) {
-		struct ip_mreq mreq;
-		struct sockaddr_in *lsin = pri->listen_addr;
-
-		mreq.imr_multiaddr.s_addr = lsin->sin_addr.s_addr;
-		mreq.imr_interface.s_addr = 0;
-		if (setsockopt(fd, SOL_IP, IP_DROP_MEMBERSHIP,
-			       &mreq, sizeof(mreq)) < 0) {
-			printk(UM_KERN_ERR "umcast_close: IP_DROP_MEMBERSHIP "
-			       "failed, error = %d\n", errno);
-		}
-	}
-
-	close(fd);
-}
-
-int umcast_user_write(int fd, void *buf, int len, struct umcast_data *pri)
-{
-	struct sockaddr_in *data_addr = pri->remote_addr;
-
-	return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr));
-}
-
-const struct net_user_info umcast_user_info = {
-	.init	= umcast_user_init,
-	.open	= umcast_open,
-	.close	= umcast_close,
-	.remove	= umcast_remove,
-	.add_address	= NULL,
-	.delete_address = NULL,
-	.mtu	= ETH_MAX_PACKET,
-	.max_packet	= ETH_MAX_PACKET + ETH_HEADER_OTHER,
-};
diff --git a/arch/um/drivers/vde.h b/arch/um/drivers/vde.h
deleted file mode 100644
index cab0379e6142..000000000000
--- a/arch/um/drivers/vde.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2007 Luca Bigliardi (shammash@artha.org).
- */
-
-#ifndef __UM_VDE_H__
-#define __UM_VDE_H__
-
-struct vde_data {
-	char *vde_switch;
-	char *descr;
-	void *args;
-	void *conn;
-	void *dev;
-};
-
-struct vde_init {
-	char *vde_switch;
-	char *descr;
-	int port;
-	char *group;
-	int mode;
-};
-
-extern const struct net_user_info vde_user_info;
-
-extern void vde_init_libstuff(struct vde_data *vpri, struct vde_init *init);
-
-extern int vde_user_read(void *conn, void *buf, int len);
-extern int vde_user_write(void *conn, void *buf, int len);
-
-#endif
diff --git a/arch/um/drivers/vde_kern.c b/arch/um/drivers/vde_kern.c
deleted file mode 100644
index bc6f22cbfb35..000000000000
--- a/arch/um/drivers/vde_kern.c
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Luca Bigliardi (shammash@artha.org).
- *
- * Transport usage:
- *  ethN=vde,<vde_switch>,<mac addr>,<port>,<group>,<mode>,<description>
- *
- */
-
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <net_kern.h>
-#include <net_user.h>
-#include "vde.h"
-
-static void vde_init(struct net_device *dev, void *data)
-{
-	struct vde_init *init = data;
-	struct uml_net_private *pri;
-	struct vde_data *vpri;
-
-	pri = netdev_priv(dev);
-	vpri = (struct vde_data *) pri->user;
-
-	vpri->vde_switch = init->vde_switch;
-	vpri->descr = init->descr ? init->descr : "UML vde_transport";
-	vpri->args = NULL;
-	vpri->conn = NULL;
-	vpri->dev = dev;
-
-	printk("vde backend - %s, ", vpri->vde_switch ?
-	       vpri->vde_switch : "(default socket)");
-
-	vde_init_libstuff(vpri, init);
-
-	printk("\n");
-}
-
-static int vde_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	struct vde_data *pri = (struct vde_data *) &lp->user;
-
-	if (pri->conn != NULL)
-		return vde_user_read(pri->conn, skb_mac_header(skb),
-				     skb->dev->mtu + ETH_HEADER_OTHER);
-
-	printk(KERN_ERR "vde_read - we have no VDECONN to read from");
-	return -EBADF;
-}
-
-static int vde_write(int fd, struct sk_buff *skb, struct uml_net_private *lp)
-{
-	struct vde_data *pri = (struct vde_data *) &lp->user;
-
-	if (pri->conn != NULL)
-		return vde_user_write((void *)pri->conn, skb->data,
-				      skb->len);
-
-	printk(KERN_ERR "vde_write - we have no VDECONN to write to");
-	return -EBADF;
-}
-
-static const struct net_kern_info vde_kern_info = {
-	.init			= vde_init,
-	.protocol		= eth_protocol,
-	.read			= vde_read,
-	.write			= vde_write,
-};
-
-static int vde_setup(char *str, char **mac_out, void *data)
-{
-	struct vde_init *init = data;
-	char *remain, *port_str = NULL, *mode_str = NULL, *last;
-
-	*init = ((struct vde_init)
-		{ .vde_switch		= NULL,
-		  .descr		= NULL,
-		  .port			= 0,
-		  .group		= NULL,
-		  .mode			= 0 });
-
-	remain = split_if_spec(str, &init->vde_switch, mac_out, &port_str,
-				&init->group, &mode_str, &init->descr, NULL);
-
-	if (remain != NULL)
-		printk(KERN_WARNING "vde_setup - Ignoring extra data :"
-		       "'%s'\n", remain);
-
-	if (port_str != NULL) {
-		init->port = simple_strtoul(port_str, &last, 10);
-		if ((*last != '\0') || (last == port_str)) {
-			printk(KERN_ERR "vde_setup - Bad port : '%s'\n",
-						port_str);
-			return 0;
-		}
-	}
-
-	if (mode_str != NULL) {
-		init->mode = simple_strtoul(mode_str, &last, 8);
-		if ((*last != '\0') || (last == mode_str)) {
-			printk(KERN_ERR "vde_setup - Bad mode : '%s'\n",
-						mode_str);
-			return 0;
-		}
-	}
-
-	printk(KERN_INFO "Configured vde device: %s\n", init->vde_switch ?
-	       init->vde_switch : "(default socket)");
-
-	return 1;
-}
-
-static struct transport vde_transport = {
-	.list 		= LIST_HEAD_INIT(vde_transport.list),
-	.name 		= "vde",
-	.setup  	= vde_setup,
-	.user 		= &vde_user_info,
-	.kern 		= &vde_kern_info,
-	.private_size 	= sizeof(struct vde_data),
-	.setup_size 	= sizeof(struct vde_init),
-};
-
-static int register_vde(void)
-{
-	register_transport(&vde_transport);
-	return 0;
-}
-
-late_initcall(register_vde);
diff --git a/arch/um/drivers/vde_user.c b/arch/um/drivers/vde_user.c
deleted file mode 100644
index bc7dc4e1e486..000000000000
--- a/arch/um/drivers/vde_user.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2007 Luca Bigliardi (shammash@artha.org).
- */
-
-#include <stddef.h>
-#include <errno.h>
-#include <libvdeplug.h>
-#include <net_user.h>
-#include <um_malloc.h>
-#include "vde.h"
-
-static int vde_user_init(void *data, void *dev)
-{
-	struct vde_data *pri = data;
-	VDECONN *conn = NULL;
-	int err = -EINVAL;
-
-	pri->dev = dev;
-
-	conn = vde_open(pri->vde_switch, pri->descr, pri->args);
-
-	if (conn == NULL) {
-		err = -errno;
-		printk(UM_KERN_ERR "vde_user_init: vde_open failed, "
-		       "errno = %d\n", errno);
-		return err;
-	}
-
-	printk(UM_KERN_INFO "vde backend - connection opened\n");
-
-	pri->conn = conn;
-
-	return 0;
-}
-
-static int vde_user_open(void *data)
-{
-	struct vde_data *pri = data;
-
-	if (pri->conn != NULL)
-		return vde_datafd(pri->conn);
-
-	printk(UM_KERN_WARNING "vde_open - we have no VDECONN to open");
-	return -EINVAL;
-}
-
-static void vde_remove(void *data)
-{
-	struct vde_data *pri = data;
-
-	if (pri->conn != NULL) {
-		printk(UM_KERN_INFO "vde backend - closing connection\n");
-		vde_close(pri->conn);
-		pri->conn = NULL;
-		kfree(pri->args);
-		pri->args = NULL;
-		return;
-	}
-
-	printk(UM_KERN_WARNING "vde_remove - we have no VDECONN to remove");
-}
-
-const struct net_user_info vde_user_info = {
-	.init		= vde_user_init,
-	.open		= vde_user_open,
-	.close	 	= NULL,
-	.remove	 	= vde_remove,
-	.add_address	= NULL,
-	.delete_address = NULL,
-	.mtu		= ETH_MAX_PACKET,
-	.max_packet	= ETH_MAX_PACKET + ETH_HEADER_OTHER,
-};
-
-void vde_init_libstuff(struct vde_data *vpri, struct vde_init *init)
-{
-	struct vde_open_args *args;
-
-	vpri->args = uml_kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
-	if (vpri->args == NULL) {
-		printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args "
-		       "allocation failed");
-		return;
-	}
-
-	args = vpri->args;
-
-	args->port = init->port;
-	args->group = init->group;
-	args->mode = init->mode ? init->mode : 0700;
-
-	args->port ?  printk("port %d", args->port) :
-		printk("undefined port");
-}
-
-int vde_user_read(void *conn, void *buf, int len)
-{
-	VDECONN *vconn = conn;
-	int rv;
-
-	if (vconn == NULL)
-		return 0;
-
-	rv = vde_recv(vconn, buf, len, 0);
-	if (rv < 0) {
-		if (errno == EAGAIN)
-			return 0;
-		return -errno;
-	}
-	else if (rv == 0)
-		return -ENOTCONN;
-
-	return rv;
-}
-
-int vde_user_write(void *conn, void *buf, int len)
-{
-	VDECONN *vconn = conn;
-
-	if (vconn == NULL)
-		return 0;
-
-	return vde_send(vconn, buf, len, 0);
-}
-