Merge tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fsgsbase from Thomas Gleixner:
 "Support for FSGSBASE. Almost 5 years after the first RFC to support
  it, this has been brought into a shape which is maintainable and
  actually works.

  This final version was done by Sasha Levin who took it up after Intel
  dropped the ball. Sasha discovered that the SGX (sic!) offerings out
  there ship rogue kernel modules enabling FSGSBASE behind the kernels
  back which opens an instantanious unpriviledged root hole.

  The FSGSBASE instructions provide a considerable speedup of the
  context switch path and enable user space to write GSBASE without
  kernel interaction. This enablement requires careful handling of the
  exception entries which go through the paranoid entry path as they
  can no longer rely on the assumption that user GSBASE is positive (as
  enforced via prctl() on non FSGSBASE enabled systemn).

  All other entries (syscalls, interrupts and exceptions) can still just
  utilize SWAPGS unconditionally when the entry comes from user space.
  Converting these entries to use FSGSBASE has no benefit as SWAPGS is
  only marginally slower than WRGSBASE and locating and retrieving the
  kernel GSBASE value is not a free operation either. The real benefit
  of RD/WRGSBASE is the avoidance of the MSR reads and writes.

  The changes come with appropriate selftests and have held up in field
  testing against the (sanitized) Graphene-SGX driver"

* tag 'x86-fsgsbase-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/fsgsbase: Fix Xen PV support
  x86/ptrace: Fix 32-bit PTRACE_SETREGS vs fsbase and gsbase
  selftests/x86/fsgsbase: Add a missing memory constraint
  selftests/x86/fsgsbase: Fix a comment in the ptrace_write_gsbase test
  selftests/x86: Add a syscall_arg_fault_64 test for negative GSBASE
  selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE
  selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write
  Documentation/x86/64: Add documentation for GS/FS addressing mode
  x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
  x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
  x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit
  x86/entry/64: Introduce the FIND_PERCPU_BASE macro
  x86/entry/64: Switch CR3 before SWAPGS in paranoid entry
  x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation
  x86/process/64: Use FSGSBASE instructions on thread copy and ptrace
  x86/process/64: Use FSBSBASE in switch_to() if available
  x86/process/64: Make save_fsgs_for_kvm() ready for FSGSBASE
  x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions
  x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
  x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE
  ...

1 files changed, 107 insertions, 32 deletions

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index d2599c627d38..70dea9337816 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -38,6 +38,7 @@
 #include <asm/frame.h>
 #include <asm/trapnr.h>
 #include <asm/nospec-branch.h>
+#include <asm/fsgsbase.h>
 #include <linux/err.h>
 
 #include "calling.h"
@@ -426,10 +427,7 @@ SYM_CODE_START(\asmsym)
 	testb	$3, CS-ORIG_RAX(%rsp)
 	jnz	.Lfrom_usermode_switch_stack_\@
 
-	/*
-	 * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
-	 * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
-	 */
+	/* paranoid_entry returns GS information for paranoid_exit in EBX. */
 	call	paranoid_entry
 
 	UNWIND_HINT_REGS
@@ -458,10 +456,7 @@ SYM_CODE_START(\asmsym)
 	UNWIND_HINT_IRET_REGS offset=8
 	ASM_CLAC
 
-	/*
-	 * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
-	 * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
-	 */
+	/* paranoid_entry returns GS information for paranoid_exit in EBX. */
 	call	paranoid_entry
 	UNWIND_HINT_REGS
 
@@ -798,24 +793,21 @@ SYM_CODE_END(xen_failsafe_callback)
 #endif /* CONFIG_XEN_PV */
 
 /*
- * Save all registers in pt_regs, and switch gs if needed.
- * Use slow, but surefire "are we in kernel?" check.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
+ * Save all registers in pt_regs. Return GSBASE related information
+ * in EBX depending on the availability of the FSGSBASE instructions:
+ *
+ * FSGSBASE	R/EBX
+ *     N        0 -> SWAPGS on exit
+ *              1 -> no SWAPGS on exit
+ *
+ *     Y        GSBASE value at entry, must be restored in paranoid_exit
  */
 SYM_CODE_START_LOCAL(paranoid_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
 	ENCODE_FRAME_POINTER 8
-	movl	$1, %ebx
-	movl	$MSR_GS_BASE, %ecx
-	rdmsr
-	testl	%edx, %edx
-	js	1f				/* negative -> in kernel */
-	SWAPGS
-	xorl	%ebx, %ebx
 
-1:
 	/*
 	 * Always stash CR3 in %r14.  This value will be restored,
 	 * verbatim, at exit.  Needed if paranoid_entry interrupted
@@ -825,16 +817,60 @@ SYM_CODE_START_LOCAL(paranoid_entry)
 	 * This is also why CS (stashed in the "iret frame" by the
 	 * hardware at entry) can not be used: this may be a return
 	 * to kernel code, but with a user CR3 value.
+	 *
+	 * Switching CR3 does not depend on kernel GSBASE so it can
+	 * be done before switching to the kernel GSBASE. This is
+	 * required for FSGSBASE because the kernel GSBASE has to
+	 * be retrieved from a kernel internal table.
 	 */
 	SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
 
 	/*
+	 * Handling GSBASE depends on the availability of FSGSBASE.
+	 *
+	 * Without FSGSBASE the kernel enforces that negative GSBASE
+	 * values indicate kernel GSBASE. With FSGSBASE no assumptions
+	 * can be made about the GSBASE value when entering from user
+	 * space.
+	 */
+	ALTERNATIVE "jmp .Lparanoid_entry_checkgs", "", X86_FEATURE_FSGSBASE
+
+	/*
+	 * Read the current GSBASE and store it in %rbx unconditionally,
+	 * retrieve and set the current CPUs kernel GSBASE. The stored value
+	 * has to be restored in paranoid_exit unconditionally.
+	 *
+	 * The MSR write ensures that no subsequent load is based on a
+	 * mispredicted GSBASE. No extra FENCE required.
+	 */
+	SAVE_AND_SET_GSBASE scratch_reg=%rax save_reg=%rbx
+	ret
+
+.Lparanoid_entry_checkgs:
+	/* EBX = 1 -> kernel GSBASE active, no restore required */
+	movl	$1, %ebx
+	/*
+	 * The kernel-enforced convention is a negative GSBASE indicates
+	 * a kernel value. No SWAPGS needed on entry and exit.
+	 */
+	movl	$MSR_GS_BASE, %ecx
+	rdmsr
+	testl	%edx, %edx
+	jns	.Lparanoid_entry_swapgs
+	ret
+
+.Lparanoid_entry_swapgs:
+	SWAPGS
+
+	/*
 	 * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an
 	 * unconditional CR3 write, even in the PTI case.  So do an lfence
 	 * to prevent GS speculation, regardless of whether PTI is enabled.
 	 */
 	FENCE_SWAPGS_KERNEL_ENTRY
 
+	/* EBX = 0 -> SWAPGS required on exit */
+	xorl	%ebx, %ebx
 	ret
 SYM_CODE_END(paranoid_entry)
 
@@ -845,23 +881,45 @@ SYM_CODE_END(paranoid_entry)
  *
  * We may be returning to very strange contexts (e.g. very early
  * in syscall entry), so checking for preemption here would
- * be complicated.  Fortunately, we there's no good reason
- * to try to handle preemption here.
+ * be complicated.  Fortunately, there's no good reason to try
+ * to handle preemption here.
+ *
+ * R/EBX contains the GSBASE related information depending on the
+ * availability of the FSGSBASE instructions:
+ *
+ * FSGSBASE	R/EBX
+ *     N        0 -> SWAPGS on exit
+ *              1 -> no SWAPGS on exit
  *
- * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
+ *     Y        User space GSBASE, must be restored unconditionally
  */
 SYM_CODE_START_LOCAL(paranoid_exit)
 	UNWIND_HINT_REGS
-	testl	%ebx, %ebx			/* swapgs needed? */
-	jnz	.Lparanoid_exit_no_swapgs
-	/* Always restore stashed CR3 value (see paranoid_entry) */
-	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
+	/*
+	 * The order of operations is important. RESTORE_CR3 requires
+	 * kernel GSBASE.
+	 *
+	 * NB to anyone to try to optimize this code: this code does
+	 * not execute at all for exceptions from user mode. Those
+	 * exceptions go through error_exit instead.
+	 */
+	RESTORE_CR3	scratch_reg=%rax save_reg=%r14
+
+	/* Handle the three GSBASE cases */
+	ALTERNATIVE "jmp .Lparanoid_exit_checkgs", "", X86_FEATURE_FSGSBASE
+
+	/* With FSGSBASE enabled, unconditionally restore GSBASE */
+	wrgsbase	%rbx
+	jmp		restore_regs_and_return_to_kernel
+
+.Lparanoid_exit_checkgs:
+	/* On non-FSGSBASE systems, conditionally do SWAPGS */
+	testl		%ebx, %ebx
+	jnz		restore_regs_and_return_to_kernel
+
+	/* We are returning to a context with user GSBASE */
 	SWAPGS_UNSAFE_STACK
-	jmp	restore_regs_and_return_to_kernel
-.Lparanoid_exit_no_swapgs:
-	/* Always restore stashed CR3 value (see paranoid_entry) */
-	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
-	jmp restore_regs_and_return_to_kernel
+	jmp		restore_regs_and_return_to_kernel
 SYM_CODE_END(paranoid_exit)
 
 /*
@@ -1266,10 +1324,27 @@ end_repeat_nmi:
 	/* Always restore stashed CR3 value (see paranoid_entry) */
 	RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
 
-	testl	%ebx, %ebx			/* swapgs needed? */
+	/*
+	 * The above invocation of paranoid_entry stored the GSBASE
+	 * related information in R/EBX depending on the availability
+	 * of FSGSBASE.
+	 *
+	 * If FSGSBASE is enabled, restore the saved GSBASE value
+	 * unconditionally, otherwise take the conditional SWAPGS path.
+	 */
+	ALTERNATIVE "jmp nmi_no_fsgsbase", "", X86_FEATURE_FSGSBASE
+
+	wrgsbase	%rbx
+	jmp	nmi_restore
+
+nmi_no_fsgsbase:
+	/* EBX == 0 -> invoke SWAPGS */
+	testl	%ebx, %ebx
 	jnz	nmi_restore
+
 nmi_swapgs:
 	SWAPGS_UNSAFE_STACK
+
 nmi_restore:
 	POP_REGS