clk: tegra: Initialize UTMI PLL when enabling PLLU

Move the UTMI PLL initialization code form clk-tegra<chip>.c files into
clk-pll.c. UTMI PLL was being configured and set in HW control right
after registration. However, when the clock init_table is processed and
child clks of PLLU are enabled, it will call in and enable PLLU as
well, and initiate SW enabling sequence even though PLLU is already in
HW control. This leads to getting UTMIPLL stuck with a SEQ_BUSY status.

Doing the initialization once during pllu_enable means we configure it
properly into HW control.

A side effect of the commonization/localization of the UTMI PLL init
code, is that it corrects some errors that were present for earlier
generations. For instance, in clk-tegra124.c, it used to have:

    #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)

when the correct shift to use is present in the new version:

    #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)

which matches the Tegra124 TRM register definition.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
[rklein: Merged in some later fixes for potential deadlocks]
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
[treding: coding style bike-shedding, remove unused variable]
Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 2 insertions, 154 deletions

diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index f4fbbf16a056..a112d3d2bff1 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -99,32 +99,6 @@
 
 #define CCLKG_BURST_POLICY 0x368
 
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-
-#define UTMIPLL_HW_PWRDN_CFG0			0x52c
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE	BIT(25)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE	BIT(24)
-#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET	BIT(6)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE	BIT(5)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL	BIT(4)
-#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL	BIT(2)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE	BIT(1)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL	BIT(0)
-
 /* Tegra CPU clock and reset control regs */
 #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS	0x470
 
@@ -764,43 +738,6 @@ static struct tegra_clk_pll_params pll_u_params = {
 		 TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
 };
 
-struct utmi_clk_param {
-	/* Oscillator Frequency in KHz */
-	u32 osc_frequency;
-	/* UTMIP PLL Enable Delay Count  */
-	u8 enable_delay_count;
-	/* UTMIP PLL Stable count */
-	u8 stable_count;
-	/*  UTMIP PLL Active delay count */
-	u8 active_delay_count;
-	/* UTMIP PLL Xtal frequency count */
-	u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
-	{
-		.osc_frequency = 13000000, .enable_delay_count = 0x02,
-		.stable_count = 0x33, .active_delay_count = 0x05,
-		.xtal_freq_count = 0x7f
-	}, {
-		.osc_frequency = 19200000, .enable_delay_count = 0x03,
-		.stable_count = 0x4b, .active_delay_count = 0x06,
-		.xtal_freq_count = 0xbb
-	}, {
-		.osc_frequency = 12000000, .enable_delay_count = 0x02,
-		.stable_count = 0x2f, .active_delay_count = 0x04,
-		.xtal_freq_count = 0x76
-	}, {
-		.osc_frequency = 26000000, .enable_delay_count = 0x04,
-		.stable_count = 0x66, .active_delay_count = 0x09,
-		.xtal_freq_count = 0xfe
-	}, {
-		.osc_frequency = 16800000, .enable_delay_count = 0x03,
-		.stable_count = 0x41, .active_delay_count = 0x0a,
-		.xtal_freq_count = 0xa4
-	},
-};
-
 static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
 	[tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
@@ -1063,88 +1000,6 @@ static struct tegra_devclk devclks[] __initdata = {
 
 static struct clk **clks;
 
-static void tegra124_utmi_param_configure(void __iomem *clk_base)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
-		if (osc_freq == utmi_parameters[i].osc_frequency)
-			break;
-	}
-
-	if (i >= ARRAY_SIZE(utmi_parameters)) {
-		pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
-		       osc_freq);
-		return;
-	}
-
-	reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
-	/* Program UTMIP PLL stable and active counts */
-	/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
-	reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
-	reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
-
-	reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
-	reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
-					    active_delay_count);
-
-	/* Remove power downs from UTMIP PLL control bits */
-	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
-	writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
-	/* Program UTMIP PLL delay and oscillator frequency counts */
-	reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
-	reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
-	reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
-					    enable_delay_count);
-
-	reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
-	reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
-					   xtal_freq_count);
-
-	/* Remove power downs from UTMIP PLL control bits */
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
-	writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
-	/* Setup HW control of UTMIPLL */
-	reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
-	reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
-	reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
-	reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
-	writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
-	reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
-	writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
-	udelay(1);
-
-	/* Setup SW override of UTMIPLL assuming USB2.0
-	   ports are assigned to USB2 */
-	reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
-	reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
-	reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
-	writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
-	udelay(1);
-
-	/* Enable HW control UTMIPLL */
-	reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
-	reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
-	writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-}
-
 static __init void tegra124_periph_clk_init(void __iomem *clk_base,
 					    void __iomem *pmc_base)
 {
@@ -1195,7 +1050,6 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base,
 static void __init tegra124_pll_init(void __iomem *clk_base,
 				     void __iomem *pmc)
 {
-	u32 val;
 	struct clk *clk;
 
 	/* PLLC */
@@ -1256,17 +1110,11 @@ static void __init tegra124_pll_init(void __iomem *clk_base,
 	clks[TEGRA124_CLK_PLL_M_UD] = clk;
 
 	/* PLLU */
-	val = readl(clk_base + pll_u_params.base_reg);
-	val &= ~BIT(24); /* disable PLLU_OVERRIDE */
-	writel(val, clk_base + pll_u_params.base_reg);
-
-	clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
-			    &pll_u_params, &pll_u_lock);
+	clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
+					       &pll_u_params, &pll_u_lock);
 	clk_register_clkdev(clk, "pll_u", NULL);
 	clks[TEGRA124_CLK_PLL_U] = clk;
 
-	tegra124_utmi_param_configure(clk_base);
-
 	/* PLLU_480M */
 	clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
 				CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,