Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...

1 files changed, 1406 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
new file mode 100644
index 000000000000..f5a78d53e297
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -0,0 +1,1406 @@
+/*
+ * Copyright © 2012-2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eugeni Dodonov <eugeni.dodonov@intel.com>
+ *    Daniel Vetter <daniel.vetter@ffwll.ch>
+ *
+ */
+
+#include <linux/pm_runtime.h>
+#include <linux/vgaarb.h>
+
+#include "i915_drv.h"
+#include "intel_drv.h"
+#include <drm/i915_powerwell.h>
+
+/**
+ * DOC: runtime pm
+ *
+ * The i915 driver supports dynamic enabling and disabling of entire hardware
+ * blocks at runtime. This is especially important on the display side where
+ * software is supposed to control many power gates manually on recent hardware,
+ * since on the GT side a lot of the power management is done by the hardware.
+ * But even there some manual control at the device level is required.
+ *
+ * Since i915 supports a diverse set of platforms with a unified codebase and
+ * hardware engineers just love to shuffle functionality around between power
+ * domains there's a sizeable amount of indirection required. This file provides
+ * generic functions to the driver for grabbing and releasing references for
+ * abstract power domains. It then maps those to the actual power wells
+ * present for a given platform.
+ */
+
+static struct i915_power_domains *hsw_pwr;
+
+#define for_each_power_well(i, power_well, domain_mask, power_domains)	\
+	for (i = 0;							\
+	     i < (power_domains)->power_well_count &&			\
+		 ((power_well) = &(power_domains)->power_wells[i]);	\
+	     i++)							\
+		if ((power_well)->domains & (domain_mask))
+
+#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \
+	for (i = (power_domains)->power_well_count - 1;			 \
+	     i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\
+	     i--)							 \
+		if ((power_well)->domains & (domain_mask))
+
+/*
+ * We should only use the power well if we explicitly asked the hardware to
+ * enable it, so check if it's enabled and also check if we've requested it to
+ * be enabled.
+ */
+static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	return I915_READ(HSW_PWR_WELL_DRIVER) ==
+		     (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
+}
+
+/**
+ * __intel_display_power_is_enabled - unlocked check for a power domain
+ * @dev_priv: i915 device instance
+ * @domain: power domain to check
+ *
+ * This is the unlocked version of intel_display_power_is_enabled() and should
+ * only be used from error capture and recovery code where deadlocks are
+ * possible.
+ *
+ * Returns:
+ * True when the power domain is enabled, false otherwise.
+ */
+bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+				      enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	bool is_enabled;
+	int i;
+
+	if (dev_priv->pm.suspended)
+		return false;
+
+	power_domains = &dev_priv->power_domains;
+
+	is_enabled = true;
+
+	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+		if (power_well->always_on)
+			continue;
+
+		if (!power_well->hw_enabled) {
+			is_enabled = false;
+			break;
+		}
+	}
+
+	return is_enabled;
+}
+
+/**
+ * intel_display_power_is_enabled - unlocked check for a power domain
+ * @dev_priv: i915 device instance
+ * @domain: power domain to check
+ *
+ * This function can be used to check the hw power domain state. It is mostly
+ * used in hardware state readout functions. Everywhere else code should rely
+ * upon explicit power domain reference counting to ensure that the hardware
+ * block is powered up before accessing it.
+ *
+ * Callers must hold the relevant modesetting locks to ensure that concurrent
+ * threads can't disable the power well while the caller tries to read a few
+ * registers.
+ *
+ * Returns:
+ * True when the power domain is enabled, false otherwise.
+ */
+bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+				    enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	bool ret;
+
+	power_domains = &dev_priv->power_domains;
+
+	mutex_lock(&power_domains->lock);
+	ret = __intel_display_power_is_enabled(dev_priv, domain);
+	mutex_unlock(&power_domains->lock);
+
+	return ret;
+}
+
+/**
+ * intel_display_set_init_power - set the initial power domain state
+ * @dev_priv: i915 device instance
+ * @enable: whether to enable or disable the initial power domain state
+ *
+ * For simplicity our driver load/unload and system suspend/resume code assumes
+ * that all power domains are always enabled. This functions controls the state
+ * of this little hack. While the initial power domain state is enabled runtime
+ * pm is effectively disabled.
+ */
+void intel_display_set_init_power(struct drm_i915_private *dev_priv,
+				  bool enable)
+{
+	if (dev_priv->power_domains.init_power_on == enable)
+		return;
+
+	if (enable)
+		intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+	else
+		intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+	dev_priv->power_domains.init_power_on = enable;
+}
+
+/*
+ * Starting with Haswell, we have a "Power Down Well" that can be turned off
+ * when not needed anymore. We have 4 registers that can request the power well
+ * to be enabled, and it will only be disabled if none of the registers is
+ * requesting it to be enabled.
+ */
+static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	/*
+	 * After we re-enable the power well, if we touch VGA register 0x3d5
+	 * we'll get unclaimed register interrupts. This stops after we write
+	 * anything to the VGA MSR register. The vgacon module uses this
+	 * register all the time, so if we unbind our driver and, as a
+	 * consequence, bind vgacon, we'll get stuck in an infinite loop at
+	 * console_unlock(). So make here we touch the VGA MSR register, making
+	 * sure vgacon can keep working normally without triggering interrupts
+	 * and error messages.
+	 */
+	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+	outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
+	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+
+	if (IS_BROADWELL(dev) || (INTEL_INFO(dev)->gen >= 9))
+		gen8_irq_power_well_post_enable(dev_priv);
+}
+
+static void hsw_set_power_well(struct drm_i915_private *dev_priv,
+			       struct i915_power_well *power_well, bool enable)
+{
+	bool is_enabled, enable_requested;
+	uint32_t tmp;
+
+	tmp = I915_READ(HSW_PWR_WELL_DRIVER);
+	is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
+	enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
+
+	if (enable) {
+		if (!enable_requested)
+			I915_WRITE(HSW_PWR_WELL_DRIVER,
+				   HSW_PWR_WELL_ENABLE_REQUEST);
+
+		if (!is_enabled) {
+			DRM_DEBUG_KMS("Enabling power well\n");
+			if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
+				      HSW_PWR_WELL_STATE_ENABLED), 20))
+				DRM_ERROR("Timeout enabling power well\n");
+			hsw_power_well_post_enable(dev_priv);
+		}
+
+	} else {
+		if (enable_requested) {
+			I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
+			POSTING_READ(HSW_PWR_WELL_DRIVER);
+			DRM_DEBUG_KMS("Requesting to disable the power well\n");
+		}
+	}
+}
+
+static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
+
+	/*
+	 * We're taking over the BIOS, so clear any requests made by it since
+	 * the driver is in charge now.
+	 */
+	if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
+		I915_WRITE(HSW_PWR_WELL_BIOS, 0);
+}
+
+static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
+				  struct i915_power_well *power_well)
+{
+	hsw_set_power_well(dev_priv, power_well, true);
+}
+
+static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	hsw_set_power_well(dev_priv, power_well, false);
+}
+
+static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+}
+
+static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
+					     struct i915_power_well *power_well)
+{
+	return true;
+}
+
+static void vlv_set_power_well(struct drm_i915_private *dev_priv,
+			       struct i915_power_well *power_well, bool enable)
+{
+	enum punit_power_well power_well_id = power_well->data;
+	u32 mask;
+	u32 state;
+	u32 ctrl;
+
+	mask = PUNIT_PWRGT_MASK(power_well_id);
+	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
+			 PUNIT_PWRGT_PWR_GATE(power_well_id);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+	((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
+
+	if (COND)
+		goto out;
+
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
+	ctrl &= ~mask;
+	ctrl |= state;
+	vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
+
+	if (wait_for(COND, 100))
+		DRM_ERROR("timout setting power well state %08x (%08x)\n",
+			  state,
+			  vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
+
+#undef COND
+
+out:
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
+				  struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, true);
+}
+
+static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	int power_well_id = power_well->data;
+	bool enabled = false;
+	u32 mask;
+	u32 state;
+	u32 ctrl;
+
+	mask = PUNIT_PWRGT_MASK(power_well_id);
+	ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
+	/*
+	 * We only ever set the power-on and power-gate states, anything
+	 * else is unexpected.
+	 */
+	WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
+		state != PUNIT_PWRGT_PWR_GATE(power_well_id));
+	if (state == ctrl)
+		enabled = true;
+
+	/*
+	 * A transient state at this point would mean some unexpected party
+	 * is poking at the power controls too.
+	 */
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
+	WARN_ON(ctrl != state);
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	return enabled;
+}
+
+static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
+					  struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	valleyview_enable_display_irqs(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	/*
+	 * During driver initialization/resume we can avoid restoring the
+	 * part of the HW/SW state that will be inited anyway explicitly.
+	 */
+	if (dev_priv->power_domains.initializing)
+		return;
+
+	intel_hpd_init(dev_priv);
+
+	i915_redisable_vga_power_on(dev_priv->dev);
+}
+
+static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	valleyview_disable_display_irqs(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	vlv_set_power_well(dev_priv, power_well, false);
+
+	vlv_power_sequencer_reset(dev_priv);
+}
+
+static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+	/*
+	 * Enable the CRI clock source so we can get at the
+	 * display and the reference clock for VGA
+	 * hotplug / manual detection.
+	 */
+	I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+		   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	/*
+	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
+	 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
+	 *   b.	The other bits such as sfr settings / modesel may all
+	 *	be set to 0.
+	 *
+	 * This should only be done on init and resume from S3 with
+	 * both PLLs disabled, or we risk losing DPIO and PLL
+	 * synchronization.
+	 */
+	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+}
+
+static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+					    struct i915_power_well *power_well)
+{
+	enum pipe pipe;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+	for_each_pipe(dev_priv, pipe)
+		assert_pll_disabled(dev_priv, pipe);
+
+	/* Assert common reset */
+	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
+
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	enum dpio_phy phy;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+	/*
+	 * Enable the CRI clock source so we can get at the
+	 * display and the reference clock for VGA
+	 * hotplug / manual detection.
+	 */
+	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+		phy = DPIO_PHY0;
+		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+			   DPLL_REFA_CLK_ENABLE_VLV);
+		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+	} else {
+		phy = DPIO_PHY1;
+		I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
+			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+	}
+	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	/* Poll for phypwrgood signal */
+	if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
+		DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+	I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) |
+		   PHY_COM_LANE_RESET_DEASSERT(phy));
+}
+
+static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+					    struct i915_power_well *power_well)
+{
+	enum dpio_phy phy;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+		phy = DPIO_PHY0;
+		assert_pll_disabled(dev_priv, PIPE_A);
+		assert_pll_disabled(dev_priv, PIPE_B);
+	} else {
+		phy = DPIO_PHY1;
+		assert_pll_disabled(dev_priv, PIPE_C);
+	}
+
+	I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) &
+		   ~PHY_COM_LANE_RESET_DEASSERT(phy));
+
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	enum pipe pipe = power_well->data;
+	bool enabled;
+	u32 state, ctrl;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
+	/*
+	 * We only ever set the power-on and power-gate states, anything
+	 * else is unexpected.
+	 */
+	WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
+	enabled = state == DP_SSS_PWR_ON(pipe);
+
+	/*
+	 * A transient state at this point would mean some unexpected party
+	 * is poking at the power controls too.
+	 */
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
+	WARN_ON(ctrl << 16 != state);
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	return enabled;
+}
+
+static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
+				    struct i915_power_well *power_well,
+				    bool enable)
+{
+	enum pipe pipe = power_well->data;
+	u32 state;
+	u32 ctrl;
+
+	state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+	((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
+
+	if (COND)
+		goto out;
+
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+	ctrl &= ~DP_SSC_MASK(pipe);
+	ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
+	vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
+
+	if (wait_for(COND, 100))
+		DRM_ERROR("timout setting power well state %08x (%08x)\n",
+			  state,
+			  vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
+
+#undef COND
+
+out:
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
+				       struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PIPE_A &&
+		     power_well->data != PIPE_B &&
+		     power_well->data != PIPE_C);
+
+	chv_set_pipe_power_well(dev_priv, power_well, true);
+
+	if (power_well->data == PIPE_A) {
+		spin_lock_irq(&dev_priv->irq_lock);
+		valleyview_enable_display_irqs(dev_priv);
+		spin_unlock_irq(&dev_priv->irq_lock);
+
+		/*
+		 * During driver initialization/resume we can avoid restoring the
+		 * part of the HW/SW state that will be inited anyway explicitly.
+		 */
+		if (dev_priv->power_domains.initializing)
+			return;
+
+		intel_hpd_init(dev_priv);
+
+		i915_redisable_vga_power_on(dev_priv->dev);
+	}
+}
+
+static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PIPE_A &&
+		     power_well->data != PIPE_B &&
+		     power_well->data != PIPE_C);
+
+	if (power_well->data == PIPE_A) {
+		spin_lock_irq(&dev_priv->irq_lock);
+		valleyview_disable_display_irqs(dev_priv);
+		spin_unlock_irq(&dev_priv->irq_lock);
+	}
+
+	chv_set_pipe_power_well(dev_priv, power_well, false);
+
+	if (power_well->data == PIPE_A)
+		vlv_power_sequencer_reset(dev_priv);
+}
+
+static void check_power_well_state(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	bool enabled = power_well->ops->is_enabled(dev_priv, power_well);
+
+	if (power_well->always_on || !i915.disable_power_well) {
+		if (!enabled)
+			goto mismatch;
+
+		return;
+	}
+
+	if (enabled != (power_well->count > 0))
+		goto mismatch;
+
+	return;
+
+mismatch:
+	WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
+		  power_well->name, power_well->always_on, enabled,
+		  power_well->count, i915.disable_power_well);
+}
+
+/**
+ * intel_display_power_get - grab a power domain reference
+ * @dev_priv: i915 device instance
+ * @domain: power domain to reference
+ *
+ * This function grabs a power domain reference for @domain and ensures that the
+ * power domain and all its parents are powered up. Therefore users should only
+ * grab a reference to the innermost power domain they need.
+ *
+ * Any power domain reference obtained by this function must have a symmetric
+ * call to intel_display_power_put() to release the reference again.
+ */
+void intel_display_power_get(struct drm_i915_private *dev_priv,
+			     enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	intel_runtime_pm_get(dev_priv);
+
+	power_domains = &dev_priv->power_domains;
+
+	mutex_lock(&power_domains->lock);
+
+	for_each_power_well(i, power_well, BIT(domain), power_domains) {
+		if (!power_well->count++) {
+			DRM_DEBUG_KMS("enabling %s\n", power_well->name);
+			power_well->ops->enable(dev_priv, power_well);
+			power_well->hw_enabled = true;
+		}
+
+		check_power_well_state(dev_priv, power_well);
+	}
+
+	power_domains->domain_use_count[domain]++;
+
+	mutex_unlock(&power_domains->lock);
+}
+
+/**
+ * intel_display_power_put - release a power domain reference
+ * @dev_priv: i915 device instance
+ * @domain: power domain to reference
+ *
+ * This function drops the power domain reference obtained by
+ * intel_display_power_get() and might power down the corresponding hardware
+ * block right away if this is the last reference.
+ */
+void intel_display_power_put(struct drm_i915_private *dev_priv,
+			     enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	power_domains = &dev_priv->power_domains;
+
+	mutex_lock(&power_domains->lock);
+
+	WARN_ON(!power_domains->domain_use_count[domain]);
+	power_domains->domain_use_count[domain]--;
+
+	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+		WARN_ON(!power_well->count);
+
+		if (!--power_well->count && i915.disable_power_well) {
+			DRM_DEBUG_KMS("disabling %s\n", power_well->name);
+			power_well->hw_enabled = false;
+			power_well->ops->disable(dev_priv, power_well);
+		}
+
+		check_power_well_state(dev_priv, power_well);
+	}
+
+	mutex_unlock(&power_domains->lock);
+
+	intel_runtime_pm_put(dev_priv);
+}
+
+#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
+
+#define HSW_ALWAYS_ON_POWER_DOMAINS (			\
+	BIT(POWER_DOMAIN_PIPE_A) |			\
+	BIT(POWER_DOMAIN_TRANSCODER_EDP) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_CRT) |			\
+	BIT(POWER_DOMAIN_PLLS) |			\
+	BIT(POWER_DOMAIN_INIT))
+#define HSW_DISPLAY_POWER_DOMAINS (				\
+	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define BDW_ALWAYS_ON_POWER_DOMAINS (			\
+	HSW_ALWAYS_ON_POWER_DOMAINS |			\
+	BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
+#define BDW_DISPLAY_POWER_DOMAINS (				\
+	(POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_ALWAYS_ON_POWER_DOMAINS	BIT(POWER_DOMAIN_INIT)
+#define VLV_DISPLAY_POWER_DOMAINS	POWER_DOMAIN_MASK
+
+#define VLV_DPIO_CMN_BC_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_CRT) |		\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_A_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_A) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_B_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_B) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_C_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_C) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_BC_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_D_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
+	.sync_hw = i9xx_always_on_power_well_noop,
+	.enable = i9xx_always_on_power_well_noop,
+	.disable = i9xx_always_on_power_well_noop,
+	.is_enabled = i9xx_always_on_power_well_enabled,
+};
+
+static const struct i915_power_well_ops chv_pipe_power_well_ops = {
+	.sync_hw = chv_pipe_power_well_sync_hw,
+	.enable = chv_pipe_power_well_enable,
+	.disable = chv_pipe_power_well_disable,
+	.is_enabled = chv_pipe_power_well_enabled,
+};
+
+static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = chv_dpio_cmn_power_well_enable,
+	.disable = chv_dpio_cmn_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well i9xx_always_on_power_well[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = POWER_DOMAIN_MASK,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+};
+
+static const struct i915_power_well_ops hsw_power_well_ops = {
+	.sync_hw = hsw_power_well_sync_hw,
+	.enable = hsw_power_well_enable,
+	.disable = hsw_power_well_disable,
+	.is_enabled = hsw_power_well_enabled,
+};
+
+static struct i915_power_well hsw_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = HSW_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = HSW_DISPLAY_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+	},
+};
+
+static struct i915_power_well bdw_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = BDW_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = BDW_DISPLAY_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+	},
+};
+
+static const struct i915_power_well_ops vlv_display_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_display_power_well_enable,
+	.disable = vlv_display_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_dpio_cmn_power_well_enable,
+	.disable = vlv_dpio_cmn_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_power_well_enable,
+	.disable = vlv_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well vlv_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = VLV_DISPLAY_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DISP2D,
+		.ops = &vlv_display_power_well_ops,
+	},
+	{
+		.name = "dpio-tx-b-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+	},
+	{
+		.name = "dpio-tx-b-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+	},
+	{
+		.name = "dpio-tx-c-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+	},
+	{
+		.name = "dpio-tx-c-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+	},
+	{
+		.name = "dpio-common",
+		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+		.ops = &vlv_dpio_cmn_power_well_ops,
+	},
+};
+
+static struct i915_power_well chv_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+#if 0
+	{
+		.name = "display",
+		.domains = VLV_DISPLAY_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DISP2D,
+		.ops = &vlv_display_power_well_ops,
+	},
+#endif
+	{
+		.name = "pipe-a",
+		/*
+		 * FIXME: pipe A power well seems to be the new disp2d well.
+		 * At least all registers seem to be housed there. Figure
+		 * out if this a a temporary situation in pre-production
+		 * hardware or a permanent state of affairs.
+		 */
+		.domains = CHV_PIPE_A_POWER_DOMAINS | VLV_DISPLAY_POWER_DOMAINS,
+		.data = PIPE_A,
+		.ops = &chv_pipe_power_well_ops,
+	},
+#if 0
+	{
+		.name = "pipe-b",
+		.domains = CHV_PIPE_B_POWER_DOMAINS,
+		.data = PIPE_B,
+		.ops = &chv_pipe_power_well_ops,
+	},
+	{
+		.name = "pipe-c",
+		.domains = CHV_PIPE_C_POWER_DOMAINS,
+		.data = PIPE_C,
+		.ops = &chv_pipe_power_well_ops,
+	},
+#endif
+	{
+		.name = "dpio-common-bc",
+		/*
+		 * XXX: cmnreset for one PHY seems to disturb the other.
+		 * As a workaround keep both powered on at the same
+		 * time for now.
+		 */
+		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+		.ops = &chv_dpio_cmn_power_well_ops,
+	},
+	{
+		.name = "dpio-common-d",
+		/*
+		 * XXX: cmnreset for one PHY seems to disturb the other.
+		 * As a workaround keep both powered on at the same
+		 * time for now.
+		 */
+		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_D,
+		.ops = &chv_dpio_cmn_power_well_ops,
+	},
+#if 0
+	{
+		.name = "dpio-tx-b-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+	},
+	{
+		.name = "dpio-tx-b-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+	},
+	{
+		.name = "dpio-tx-c-01",
+		.domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+	},
+	{
+		.name = "dpio-tx-c-23",
+		.domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+	},
+	{
+		.name = "dpio-tx-d-01",
+		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01,
+	},
+	{
+		.name = "dpio-tx-d-23",
+		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23,
+	},
+#endif
+};
+
+static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
+						 enum punit_power_well power_well_id)
+{
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+		if (power_well->data == power_well_id)
+			return power_well;
+	}
+
+	return NULL;
+}
+
+#define set_power_wells(power_domains, __power_wells) ({		\
+	(power_domains)->power_wells = (__power_wells);			\
+	(power_domains)->power_well_count = ARRAY_SIZE(__power_wells);	\
+})
+
+/**
+ * intel_power_domains_init - initializes the power domain structures
+ * @dev_priv: i915 device instance
+ *
+ * Initializes the power domain structures for @dev_priv depending upon the
+ * supported platform.
+ */
+int intel_power_domains_init(struct drm_i915_private *dev_priv)
+{
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+
+	mutex_init(&power_domains->lock);
+
+	/*
+	 * The enabling order will be from lower to higher indexed wells,
+	 * the disabling order is reversed.
+	 */
+	if (IS_HASWELL(dev_priv->dev)) {
+		set_power_wells(power_domains, hsw_power_wells);
+		hsw_pwr = power_domains;
+	} else if (IS_BROADWELL(dev_priv->dev)) {
+		set_power_wells(power_domains, bdw_power_wells);
+		hsw_pwr = power_domains;
+	} else if (IS_CHERRYVIEW(dev_priv->dev)) {
+		set_power_wells(power_domains, chv_power_wells);
+	} else if (IS_VALLEYVIEW(dev_priv->dev)) {
+		set_power_wells(power_domains, vlv_power_wells);
+	} else {
+		set_power_wells(power_domains, i9xx_always_on_power_well);
+	}
+
+	return 0;
+}
+
+static void intel_runtime_pm_disable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	if (!intel_enable_rc6(dev))
+		return;
+
+	/* Make sure we're not suspended first. */
+	pm_runtime_get_sync(device);
+	pm_runtime_disable(device);
+}
+
+/**
+ * intel_power_domains_fini - finalizes the power domain structures
+ * @dev_priv: i915 device instance
+ *
+ * Finalizes the power domain structures for @dev_priv depending upon the
+ * supported platform. This function also disables runtime pm and ensures that
+ * the device stays powered up so that the driver can be reloaded.
+ */
+void intel_power_domains_fini(struct drm_i915_private *dev_priv)
+{
+	intel_runtime_pm_disable(dev_priv);
+
+	/* The i915.ko module is still not prepared to be loaded when
+	 * the power well is not enabled, so just enable it in case
+	 * we're going to unload/reload. */
+	intel_display_set_init_power(dev_priv, true);
+
+	hsw_pwr = NULL;
+}
+
+static void intel_power_domains_resume(struct drm_i915_private *dev_priv)
+{
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	mutex_lock(&power_domains->lock);
+	for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+		power_well->ops->sync_hw(dev_priv, power_well);
+		power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
+								     power_well);
+	}
+	mutex_unlock(&power_domains->lock);
+}
+
+static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
+{
+	struct i915_power_well *cmn =
+		lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
+	struct i915_power_well *disp2d =
+		lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
+
+	/* If the display might be already active skip this */
+	if (cmn->ops->is_enabled(dev_priv, cmn) &&
+	    disp2d->ops->is_enabled(dev_priv, disp2d) &&
+	    I915_READ(DPIO_CTL) & DPIO_CMNRST)
+		return;
+
+	DRM_DEBUG_KMS("toggling display PHY side reset\n");
+
+	/* cmnlane needs DPLL registers */
+	disp2d->ops->enable(dev_priv, disp2d);
+
+	/*
+	 * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
+	 * Need to assert and de-assert PHY SB reset by gating the
+	 * common lane power, then un-gating it.
+	 * Simply ungating isn't enough to reset the PHY enough to get
+	 * ports and lanes running.
+	 */
+	cmn->ops->disable(dev_priv, cmn);
+}
+
+/**
+ * intel_power_domains_init_hw - initialize hardware power domain state
+ * @dev_priv: i915 device instance
+ *
+ * This function initializes the hardware power domain state and enables all
+ * power domains using intel_display_set_init_power().
+ */
+void intel_power_domains_init_hw(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+
+	power_domains->initializing = true;
+
+	if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
+		mutex_lock(&power_domains->lock);
+		vlv_cmnlane_wa(dev_priv);
+		mutex_unlock(&power_domains->lock);
+	}
+
+	/* For now, we need the power well to be always enabled. */
+	intel_display_set_init_power(dev_priv, true);
+	intel_power_domains_resume(dev_priv);
+	power_domains->initializing = false;
+}
+
+/**
+ * intel_aux_display_runtime_get - grab an auxilliary power domain reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a power domain reference for the auxiliary power domain
+ * (for access to the GMBUS and DP AUX blocks) and ensures that it and all its
+ * parents are powered up. Therefore users should only grab a reference to the
+ * innermost power domain they need.
+ *
+ * Any power domain reference obtained by this function must have a symmetric
+ * call to intel_aux_display_runtime_put() to release the reference again.
+ */
+void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv)
+{
+	intel_runtime_pm_get(dev_priv);
+}
+
+/**
+ * intel_aux_display_runtime_put - release an auxilliary power domain reference
+ * @dev_priv: i915 device instance
+ *
+ * This function drops the auxilliary power domain reference obtained by
+ * intel_aux_display_runtime_get() and might power down the corresponding
+ * hardware block right away if this is the last reference.
+ */
+void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv)
+{
+	intel_runtime_pm_put(dev_priv);
+}
+
+/**
+ * intel_runtime_pm_get - grab a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a device-level runtime pm reference (mostly used for GEM
+ * code to ensure the GTT or GT is on) and ensures that it is powered up.
+ *
+ * Any runtime pm reference obtained by this function must have a symmetric
+ * call to intel_runtime_pm_put() to release the reference again.
+ */
+void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	pm_runtime_get_sync(device);
+	WARN(dev_priv->pm.suspended, "Device still suspended.\n");
+}
+
+/**
+ * intel_runtime_pm_get_noresume - grab a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a device-level runtime pm reference (mostly used for GEM
+ * code to ensure the GTT or GT is on).
+ *
+ * It will _not_ power up the device but instead only check that it's powered
+ * on.  Therefore it is only valid to call this functions from contexts where
+ * the device is known to be powered up and where trying to power it up would
+ * result in hilarity and deadlocks. That pretty much means only the system
+ * suspend/resume code where this is used to grab runtime pm references for
+ * delayed setup down in work items.
+ *
+ * Any runtime pm reference obtained by this function must have a symmetric
+ * call to intel_runtime_pm_put() to release the reference again.
+ */
+void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n");
+	pm_runtime_get_noresume(device);
+}
+
+/**
+ * intel_runtime_pm_put - release a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function drops the device-level runtime pm reference obtained by
+ * intel_runtime_pm_get() and might power down the corresponding
+ * hardware block right away if this is the last reference.
+ */
+void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	pm_runtime_mark_last_busy(device);
+	pm_runtime_put_autosuspend(device);
+}
+
+/**
+ * intel_runtime_pm_enable - enable runtime pm
+ * @dev_priv: i915 device instance
+ *
+ * This function enables runtime pm at the end of the driver load sequence.
+ *
+ * Note that this function does currently not enable runtime pm for the
+ * subordinate display power domains. That is only done on the first modeset
+ * using intel_display_set_init_power().
+ */
+void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	pm_runtime_set_active(device);
+
+	/*
+	 * RPM depends on RC6 to save restore the GT HW context, so make RC6 a
+	 * requirement.
+	 */
+	if (!intel_enable_rc6(dev)) {
+		DRM_INFO("RC6 disabled, disabling runtime PM support\n");
+		return;
+	}
+
+	pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
+	pm_runtime_mark_last_busy(device);
+	pm_runtime_use_autosuspend(device);
+
+	pm_runtime_put_autosuspend(device);
+}
+
+/* Display audio driver power well request */
+int i915_request_power_well(void)
+{
+	struct drm_i915_private *dev_priv;
+
+	if (!hsw_pwr)
+		return -ENODEV;
+
+	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+				power_domains);
+	intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i915_request_power_well);
+
+/* Display audio driver power well release */
+int i915_release_power_well(void)
+{
+	struct drm_i915_private *dev_priv;
+
+	if (!hsw_pwr)
+		return -ENODEV;
+
+	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+				power_domains);
+	intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i915_release_power_well);
+
+/*
+ * Private interface for the audio driver to get CDCLK in kHz.
+ *
+ * Caller must request power well using i915_request_power_well() prior to
+ * making the call.
+ */
+int i915_get_cdclk_freq(void)
+{
+	struct drm_i915_private *dev_priv;
+
+	if (!hsw_pwr)
+		return -ENODEV;
+
+	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+				power_domains);
+
+	return intel_ddi_get_cdclk_freq(dev_priv);
+}
+EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);