Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Allwinner A100 RGB LED controller
   - Add support for Maxim 5970 Dual Hot-swap controller

  New Device Support:
   - Add support for AW20108 to Awinic LED driver

  New Functionality:
   - Extend support for Net speeds to include; 2.5G, 5G and 10G
   - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
     via sysfs if required
   - Add support for hardware control in AW200xx

  Fix-ups:
   - Use safer methods for string handling
   - Improve error handling; return proper error values, simplify,
     avoid duplicates, etc
   - Replace Mutex use with the Completion mechanism
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Use generic platform device properties
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree binding adaptions/conversions/creation
   - Continue work to remove superfluous platform .remove() call-backs
   - Remove superfluous/defunct code
   - Trivial; whitespace, unused variables, spelling, clean-ups, etc
   - Avoid unnecessary duplicate locks

  Bug Fixes:
   - Repair Kconfig based dependency lists
   - Ensure unused dynamically allocated data is freed after use
   - Fix support for brightness control
   - Add missing sufficient delays during reset to ensure correct
     operation
   - Avoid division-by-zero issues"

* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
  leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
  leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  leds: sun50i-a100: Convert to be agnostic to property provider
  leds: max5970: Add missing headers
  leds: max5970: Make use of dev_err_probe()
  leds: max5970: Make use of device properties
  leds: max5970: Remove unused variable
  leds: rgb: Drop obsolete dependency on COMPILE_TEST
  leds: sun50i-a100: Avoid division-by-zero warning
  leds: trigger: Remove unused function led_trigger_rename_static()
  leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
  leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
  dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
  dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
  dt-bindings: leds: awinic,aw200xx: Add AW20108 device
  leds: aw200xx: Add support for aw20108 device
  leds: aw200xx: Improve autodim calculation method
  leds: aw200xx: Enable disable_locking flag in regmap config
  leds: aw200xx: Add delay after software reset
  dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
  ...

1 files changed, 26 insertions, 37 deletions

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 68d82a682bf6..156b73d1f4a2 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -552,9 +552,9 @@ static int lpg_parse_dtest(struct lpg *lpg)
 		ret = count;
 		goto err_malformed;
 	} else if (count != lpg->data->num_channels * 2) {
-		dev_err(lpg->dev, "qcom,dtest needs to be %d items\n",
-			lpg->data->num_channels * 2);
-		return -EINVAL;
+		return dev_err_probe(lpg->dev, -EINVAL,
+				     "qcom,dtest needs to be %d items\n",
+				     lpg->data->num_channels * 2);
 	}
 
 	for (i = 0; i < lpg->data->num_channels; i++) {
@@ -574,8 +574,7 @@ static int lpg_parse_dtest(struct lpg *lpg)
 	return 0;
 
 err_malformed:
-	dev_err(lpg->dev, "malformed qcom,dtest\n");
-	return ret;
+	return dev_err_probe(lpg->dev, ret, "malformed qcom,dtest\n");
 }
 
 static void lpg_apply_dtest(struct lpg_channel *chan)
@@ -977,9 +976,14 @@ static int lpg_pattern_mc_clear(struct led_classdev *cdev)
 	return lpg_pattern_clear(led);
 }
 
+static inline struct lpg *lpg_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lpg, pwm);
+}
+
 static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg *lpg = lpg_pwm_from_chip(chip);
 	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
 
 	return chan->in_use ? -EBUSY : 0;
@@ -995,7 +999,7 @@ static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			 const struct pwm_state *state)
 {
-	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg *lpg = lpg_pwm_from_chip(chip);
 	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
 	int ret = 0;
 
@@ -1026,7 +1030,7 @@ out_unlock:
 static int lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 			     struct pwm_state *state)
 {
-	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg *lpg = lpg_pwm_from_chip(chip);
 	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
 	unsigned int resolution;
 	unsigned int pre_div;
@@ -1095,9 +1099,9 @@ static int lpg_add_pwm(struct lpg *lpg)
 	lpg->pwm.npwm = lpg->num_channels;
 	lpg->pwm.ops = &lpg_pwm_ops;
 
-	ret = pwmchip_add(&lpg->pwm);
+	ret = devm_pwmchip_add(lpg->dev, &lpg->pwm);
 	if (ret)
-		dev_err(lpg->dev, "failed to add PWM chip: ret %d\n", ret);
+		dev_err_probe(lpg->dev, ret, "failed to add PWM chip\n");
 
 	return ret;
 }
@@ -1111,19 +1115,16 @@ static int lpg_parse_channel(struct lpg *lpg, struct device_node *np,
 	int ret;
 
 	ret = of_property_read_u32(np, "reg", &reg);
-	if (ret || !reg || reg > lpg->num_channels) {
-		dev_err(lpg->dev, "invalid \"reg\" of %pOFn\n", np);
-		return -EINVAL;
-	}
+	if (ret || !reg || reg > lpg->num_channels)
+		return dev_err_probe(lpg->dev, -EINVAL, "invalid \"reg\" of %pOFn\n", np);
 
 	chan = &lpg->channels[reg - 1];
 	chan->in_use = true;
 
 	ret = of_property_read_u32(np, "color", &color);
-	if (ret < 0 && ret != -EINVAL) {
-		dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
-		return ret;
-	}
+	if (ret < 0 && ret != -EINVAL)
+		return dev_err_probe(lpg->dev, ret,
+				     "failed to parse \"color\" of %pOF\n", np);
 
 	chan->color = color;
 
@@ -1146,10 +1147,9 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 	int i;
 
 	ret = of_property_read_u32(np, "color", &color);
-	if (ret < 0 && ret != -EINVAL) {
-		dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
-		return ret;
-	}
+	if (ret < 0 && ret != -EINVAL)
+		return dev_err_probe(lpg->dev, ret,
+			      "failed to parse \"color\" of %pOF\n", np);
 
 	if (color == LED_COLOR_ID_RGB)
 		num_channels = of_get_available_child_count(np);
@@ -1226,7 +1226,7 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
 	else
 		ret = devm_led_classdev_register_ext(lpg->dev, &led->cdev, &init_data);
 	if (ret)
-		dev_err(lpg->dev, "unable to register %s\n", cdev->name);
+		dev_err_probe(lpg->dev, ret, "unable to register %s\n", cdev->name);
 
 	return ret;
 }
@@ -1272,10 +1272,9 @@ static int lpg_init_triled(struct lpg *lpg)
 
 	if (lpg->triled_has_src_sel) {
 		ret = of_property_read_u32(np, "qcom,power-source", &lpg->triled_src);
-		if (ret || lpg->triled_src == 2 || lpg->triled_src > 3) {
-			dev_err(lpg->dev, "invalid power source\n");
-			return -EINVAL;
-		}
+		if (ret || lpg->triled_src == 2 || lpg->triled_src > 3)
+			return dev_err_probe(lpg->dev, -EINVAL,
+					     "invalid power source\n");
 	}
 
 	/* Disable automatic trickle charge LED */
@@ -1324,8 +1323,6 @@ static int lpg_probe(struct platform_device *pdev)
 	if (!lpg->data)
 		return -EINVAL;
 
-	platform_set_drvdata(pdev, lpg);
-
 	lpg->dev = &pdev->dev;
 	mutex_init(&lpg->lock);
 
@@ -1363,13 +1360,6 @@ static int lpg_probe(struct platform_device *pdev)
 	return lpg_add_pwm(lpg);
 }
 
-static void lpg_remove(struct platform_device *pdev)
-{
-	struct lpg *lpg = platform_get_drvdata(pdev);
-
-	pwmchip_remove(&lpg->pwm);
-}
-
 static const struct lpg_data pm8916_pwm_data = {
 	.num_channels = 1,
 	.channels = (const struct lpg_channel_data[]) {
@@ -1529,7 +1519,6 @@ MODULE_DEVICE_TABLE(of, lpg_of_table);
 
 static struct platform_driver lpg_driver = {
 	.probe = lpg_probe,
-	.remove_new = lpg_remove,
 	.driver = {
 		.name = "qcom-spmi-lpg",
 		.of_match_table = lpg_of_table,