Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB)
   - Add support for Ultra High-Speed II SD cards (UHS-II)
   - Use a reset control for pwrseq_simple
   - Add SD card quirk for broken poweroff notification
   - Use GFP_NOIO for SD ACMD22

  MMC host:
   - bcm2835: Introduce proper clock handling
   - mtk-sd: Add support for the Host-Software-Queue interface
   - mtk-sd: Add support for the mt7988/mt8196 variants
   - mtk-sd: Fix a couple of error paths in ->probe()
   - sdhci: Add interface to support UHS-II SD cards
   - sdhci_am654: Fixup support for changing the signal voltage level
   - sdhci-cadence: Add support for the Microchip PIC64GX variant
   - sdhci-esdhc-imx: Add support for eMMC HW-reset
   - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants
   - sdhci-of-arasan: Add support for eMMC HW-reset
   - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants

  MEMSTICK:
   - A couple of minor updates"

* tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits)
  mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly
  mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting
  mmc: mtk-sd: Fix error handle of probe function
  mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II
  mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask
  mmc: sdhci-esdhc-imx: Implement emmc hardware reset
  mmc: core: Correct type in variable assignment for UHS-II
  mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument
  mmc: sdhci-uhs2: Remove unnecessary variables
  mmc: sdhci-uhs2: Correct incorrect type in argument
  mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible
  mmc: sdhci-uhs2: Remove unnecessary NULL check
  mmc: core: Fix error paths for UHS-II card init and re-init
  mmc: core: Add error handling of sd_uhs2_power_up()
  mmc: core: Simplify sd_uhs2_power_up()
  mmc: bcm2835: Introduce proper clock handling
  mmc: bcm2835: Fix type of current clock speed
  dt-bindings: mmc: Add sdhci compatible for QCS615
  mmc: core: Use GFP_NOIO in ACMD22
  dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
  ...

1 files changed, 31 insertions, 8 deletions

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 79f6fad97a80..4830628510e6 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -50,6 +50,7 @@
 #include <linux/mmc/sd.h>
 
 #include <linux/uaccess.h>
+#include <linux/unaligned.h>
 
 #include "queue.h"
 #include "block.h"
@@ -993,11 +994,12 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
 	int err;
 	u32 result;
 	__be32 *blocks;
+	u8 resp_sz = mmc_card_ult_capacity(card) ? 8 : 4;
+	unsigned int noio_flag;
 
 	struct mmc_request mrq = {};
 	struct mmc_command cmd = {};
 	struct mmc_data data = {};
-
 	struct scatterlist sg;
 
 	err = mmc_app_cmd(card->host, card);
@@ -1008,7 +1010,7 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
-	data.blksz = 4;
+	data.blksz = resp_sz;
 	data.blocks = 1;
 	data.flags = MMC_DATA_READ;
 	data.sg = &sg;
@@ -1018,15 +1020,29 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
 	mrq.cmd = &cmd;
 	mrq.data = &data;
 
-	blocks = kmalloc(4, GFP_KERNEL);
+	noio_flag = memalloc_noio_save();
+	blocks = kmalloc(resp_sz, GFP_KERNEL);
+	memalloc_noio_restore(noio_flag);
 	if (!blocks)
 		return -ENOMEM;
 
-	sg_init_one(&sg, blocks, 4);
+	sg_init_one(&sg, blocks, resp_sz);
 
 	mmc_wait_for_req(card->host, &mrq);
 
-	result = ntohl(*blocks);
+	if (mmc_card_ult_capacity(card)) {
+		/*
+		 * Normally, ACMD22 returns the number of written sectors as
+		 * u32. SDUC, however, returns it as u64.  This is not a
+		 * superfluous requirement, because SDUC writes may exceed 2TB.
+		 * For Linux mmc however, the previously write operation could
+		 * not be more than the block layer limits, thus just make room
+		 * for a u64 and cast the response back to u32.
+		 */
+		result = clamp_val(get_unaligned_be64(blocks), 0, UINT_MAX);
+	} else {
+		result = ntohl(*blocks);
+	}
 	kfree(blocks);
 
 	if (cmd.error || data.error)
@@ -1199,7 +1215,8 @@ static void mmc_blk_issue_erase_rq(struct mmc_queue *mq, struct request *req,
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
-	unsigned int from, nr;
+	unsigned int nr;
+	sector_t from;
 	int err = 0;
 	blk_status_t status = BLK_STS_OK;
 
@@ -1254,7 +1271,8 @@ static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
-	unsigned int from, nr, arg;
+	unsigned int nr, arg;
+	sector_t from;
 	int err = 0, type = MMC_BLK_SECDISCARD;
 	blk_status_t status = BLK_STS_OK;
 
@@ -1759,6 +1777,11 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 		brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
 		brq->mrq.sbc = &brq->sbc;
 	}
+
+	if (mmc_card_ult_capacity(card)) {
+		brq->cmd.ext_addr = blk_rq_pos(req) >> 32;
+		brq->cmd.has_ext_addr = true;
+	}
 }
 
 #define MMC_MAX_RETRIES		5
@@ -2598,7 +2621,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	if (mmc_host_cmd23(card->host)) {
 		if ((mmc_card_mmc(card) &&
 		     card->csd.mmca_vsn >= CSD_SPEC_VER_3) ||
-		    (mmc_card_sd(card) &&
+		    (mmc_card_sd(card) && !mmc_card_ult_capacity(card) &&
 		     card->scr.cmds & SD_SCR_CMD23_SUPPORT))
 			md->flags |= MMC_BLK_CMD23;
 	}