diff options
| author |   Shannon Nelson <shannon.nelson@intel.com> | 2016-02-17 16:12:19 -0800 |
|---|---|---|
| committer |   Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2016-02-18 23:55:59 -0800 |
| commit | 3336514381f9ef99c50e5337ae1bf36f8138679d (patch) | |
| tree | 63eaeaad1b2a6b22ca7d8eb32646b33ca6741c76 /drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | |
| parent | i40e: add check for null VSI (diff) | |
| download | wireguard-linux-3336514381f9ef99c50e5337ae1bf36f8138679d.tar.xz wireguard-linux-3336514381f9ef99c50e5337ae1bf36f8138679d.zip | |
i40e: add adminq commands for Rx CTL registers
Add the new opcodes and struct used for asking the firmware to update Rx
control registers that need extra care when being accessed while under
heavy traffic - e.g. sustained 64byte packets at line rate on all ports.
The firmware will take extra steps to be sure the register accesses
are successful.
The registers involved are:
PFQF_CTL_0
PFQF_HENA
PFQF_FDALLOC
PFQF_HREGION
PFLAN_QALLOC
VPQF_CTL
VFQF_HENA
VFQF_HREGION
VSIQF_CTL
VSILAN_QBASE
VSILAN_QTABLE
VSIQF_TCREGION
PFQF_HKEY
VFQF_HKEY
PRTQF_CTL_0
GLFCOE_RCTL
GLFCOE_RSOF
GLQF_CTL
GLQF_SWAP
GLQF_HASH_MSK
GLQF_HASH_INSET
GLQF_HSYM
GLQF_FC_MSK
GLQF_FC_INSET
GLQF_FD_MSK
PRTQF_FD_INSET
PRTQF_FD_FLXINSET
PRTQF_FD_MSK
Change-ID: I56c8144000da66ad99f68948d8a184b2ec2aeb3e
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h index bb7ecbbdf948..8d5c65ab6267 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h @@ -146,6 +146,8 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_set_port_parameters = 0x0203, i40e_aqc_opc_get_switch_resource_alloc = 0x0204, i40e_aqc_opc_set_switch_config = 0x0205, + i40e_aqc_opc_rx_ctl_reg_read = 0x0206, + i40e_aqc_opc_rx_ctl_reg_write = 0x0207, i40e_aqc_opc_add_vsi = 0x0210, i40e_aqc_opc_update_vsi_parameters = 0x0211, @@ -696,6 +698,20 @@ struct i40e_aqc_set_switch_config { I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config); +/* Read Receive control registers (direct 0x0206) + * Write Receive control registers (direct 0x0207) + * used for accessing Rx control registers that can be + * slow and need special handling when under high Rx load + */ +struct i40e_aqc_rx_ctl_reg_read_write { + __le32 reserved1; + __le32 address; + __le32 reserved2; + __le32 value; +}; + +I40E_CHECK_CMD_LENGTH(i40e_aqc_rx_ctl_reg_read_write); + /* Add VSI (indirect 0x0210) * this indirect command uses struct i40e_aqc_vsi_properties_data * as the indirect buffer (128 bytes) |