net: axienet: Enable more clocks

This driver was only enabling the first clock on the device, regardless
of its name. However, this controller logic can have multiple clocks
which should all be enabled. Add support for enabling additional clocks.
The clock names used are matching those used in the Xilinx version of this
driver as well as the Xilinx device tree generator, except for mgt_clk
which is not present there.

For backward compatibility, if no named clocks are present, the first
clock present is used for determining the MDIO bus clock divider.

Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 2 deletions

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 1e966a39967e..708769349f76 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -376,6 +376,8 @@ struct axidma_bd {
 	struct sk_buff *skb;
 } __aligned(XAXIDMA_BD_MINIMUM_ALIGNMENT);
 
+#define XAE_NUM_MISC_CLOCKS 3
+
 /**
  * struct axienet_local - axienet private per device data
  * @ndev:	Pointer for net_device to which it will be attached.
@@ -385,7 +387,8 @@ struct axidma_bd {
  * @phylink_config: phylink configuration settings
  * @pcs_phy:	Reference to PCS/PMA PHY if used
  * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core
- * @clk:	Clock for AXI bus
+ * @axi_clk:	AXI4-Lite bus clock
+ * @misc_clks:	Misc ethernet clocks (AXI4-Stream, Ref, MGT clocks)
  * @mii_bus:	Pointer to MII bus structure
  * @mii_clk_div: MII bus clock divider value
  * @regs_start: Resource start for axienet device addresses
@@ -434,7 +437,8 @@ struct axienet_local {
 
 	bool switch_x_sgmii;
 
-	struct clk *clk;
+	struct clk *axi_clk;
+	struct clk_bulk_data misc_clks[XAE_NUM_MISC_CLOCKS];
 
 	struct mii_bus *mii_bus;
 	u8 mii_clk_div;