Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:

 - fix failure to add bond interfaces to a bridge, the offload-handling
   code was too defensive there and recent refactoring unearthed that.
   Users complained (Ido)

 - fix unnecessarily reflecting ECN bits within TOS values / QoS marking
   in TCP ACK and reset packets (Wei)

 - fix a deadlock with bpf iterator. Hopefully we're in the clear on
   this front now... (Yonghong)

 - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)

 - fix AQL on mt76 devices with FW rate control and add a couple of AQL
   issues in mac80211 code (Felix)

 - fix authentication issue with mwifiex (Maximilian)

 - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)

 - fix exception handling for multipath routes via same device (David
   Ahern)

 - revert back to a BH spin lock flavor for nsid_lock: there are paths
   which do require the BH context protection (Taehee)

 - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)

 - fix ife module load deadlock (Cong)

 - make an adjustment to netlink reply message type for code added in
   this release (the sole change touching uAPI here) (Michal)

 - a number of fixes for small NXP and Microchip switches (Vladimir)

[ Pull request acked by David: "you can expect more of this in the
  future as I try to delegate more things to Jakub" ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
  net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
  inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
  net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
  net: Update MAINTAINERS for MediaTek switch driver
  net/mlx5e: mlx5e_fec_in_caps() returns a boolean
  net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
  net/mlx5e: kTLS, Fix leak on resync error flow
  net/mlx5e: kTLS, Add missing dma_unmap in RX resync
  net/mlx5e: kTLS, Fix napi sync and possible use-after-free
  net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
  net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
  net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
  net/mlx5e: Fix endianness when calculating pedit mask first bit
  net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
  net/mlx5e: CT: Fix freeing ct_label mapping
  net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
  net/mlx5e: Use synchronize_rcu to sync with NAPI
  net/mlx5e: Use RCU to protect rq->xdp_prog
  ...

1 files changed, 29 insertions, 6 deletions

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 64b0a74c1523..9869e390875e 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -748,6 +748,13 @@ void netvsc_linkstatus_callback(struct net_device *net,
 	struct netvsc_reconfig *event;
 	unsigned long flags;
 
+	/* Ensure the packet is big enough to access its fields */
+	if (resp->msg_len - RNDIS_HEADER_SIZE < sizeof(struct rndis_indicate_status)) {
+		netdev_err(net, "invalid rndis_indicate_status packet, len: %u\n",
+			   resp->msg_len);
+		return;
+	}
+
 	/* Update the physical link speed when changing to another vSwitch */
 	if (indicate->status == RNDIS_STATUS_LINK_SPEED_CHANGE) {
 		u32 speed;
@@ -2366,7 +2373,16 @@ static int netvsc_register_vf(struct net_device *vf_netdev)
 	return NOTIFY_OK;
 }
 
-/* VF up/down change detected, schedule to change data path */
+/* Change the data path when VF UP/DOWN/CHANGE are detected.
+ *
+ * Typically a UP or DOWN event is followed by a CHANGE event, so
+ * net_device_ctx->data_path_is_vf is used to cache the current data path
+ * to avoid the duplicate call of netvsc_switch_datapath() and the duplicate
+ * message.
+ *
+ * During hibernation, if a VF NIC driver (e.g. mlx5) preserves the network
+ * interface, there is only the CHANGE event and no UP or DOWN event.
+ */
 static int netvsc_vf_changed(struct net_device *vf_netdev)
 {
 	struct net_device_context *net_device_ctx;
@@ -2383,6 +2399,10 @@ static int netvsc_vf_changed(struct net_device *vf_netdev)
 	if (!netvsc_dev)
 		return NOTIFY_DONE;
 
+	if (net_device_ctx->data_path_is_vf == vf_is_up)
+		return NOTIFY_OK;
+	net_device_ctx->data_path_is_vf = vf_is_up;
+
 	netvsc_switch_datapath(ndev, vf_is_up);
 	netdev_info(ndev, "Data path switched %s VF: %s\n",
 		    vf_is_up ? "to" : "from", vf_netdev->name);
@@ -2587,8 +2607,8 @@ static int netvsc_remove(struct hv_device *dev)
 static int netvsc_suspend(struct hv_device *dev)
 {
 	struct net_device_context *ndev_ctx;
-	struct net_device *vf_netdev, *net;
 	struct netvsc_device *nvdev;
+	struct net_device *net;
 	int ret;
 
 	net = hv_get_drvdata(dev);
@@ -2604,10 +2624,6 @@ static int netvsc_suspend(struct hv_device *dev)
 		goto out;
 	}
 
-	vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev);
-	if (vf_netdev)
-		netvsc_unregister_vf(vf_netdev);
-
 	/* Save the current config info */
 	ndev_ctx->saved_netvsc_dev_info = netvsc_devinfo_get(nvdev);
 
@@ -2628,6 +2644,12 @@ static int netvsc_resume(struct hv_device *dev)
 	rtnl_lock();
 
 	net_device_ctx = netdev_priv(net);
+
+	/* Reset the data path to the netvsc NIC before re-opening the vmbus
+	 * channel. Later netvsc_netdev_event() will switch the data path to
+	 * the VF upon the UP or CHANGE event.
+	 */
+	net_device_ctx->data_path_is_vf = false;
 	device_info = net_device_ctx->saved_netvsc_dev_info;
 
 	ret = netvsc_attach(net, device_info);
@@ -2695,6 +2717,7 @@ static int netvsc_netdev_event(struct notifier_block *this,
 		return netvsc_unregister_vf(event_dev);
 	case NETDEV_UP:
 	case NETDEV_DOWN:
+	case NETDEV_CHANGE:
 		return netvsc_vf_changed(event_dev);
 	default:
 		return NOTIFY_DONE;