wifi: remove orphaned orinoco driver

Orinoco is a PIO-only ISA/PCMCIA 802.11b device with extra bus interface
connections for PCI/Cardbus/mini-PCI and a few pre-2002 Apple PowerMac
variants. It supports both wireless extensions and CFG80211, but I could
not tell if it requires using both.

This device used to be one of the most common ones 20 years ago, but
has been orphaned for most of the time since then, and the conversion
to cfg80211 has stalled in 2010.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>

1 files changed, 0 insertions, 477 deletions

diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.c b/drivers/net/wireless/intersil/orinoco/hermes_dld.c
deleted file mode 100644
index dbeadfcfefe2..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_dld.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Hermes download helper.
- *
- * This helper:
- *  - is capable of writing to the volatile area of the hermes device
- *  - is currently not capable of writing to non-volatile areas
- *  - provide helpers to identify and update plugin data
- *  - is not capable of interpreting a fw image directly. That is up to
- *    the main card driver.
- *  - deals with Hermes I devices. It can probably be modified to deal
- *    with Hermes II devices
- *
- * Copyright (C) 2007, David Kilroy
- *
- * Plug data code slightly modified from spectrum_cs driver
- *    Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on information in wl_lkm_718 Agere driver
- *    COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include "hermes.h"
-#include "hermes_dld.h"
-
-#define PFX "hermes_dld: "
-
-/* End markers used in dblocks */
-#define PDI_END		0x00000000	/* End of PDA */
-#define BLOCK_END	0xFFFFFFFF	/* Last image block */
-#define TEXT_END	0x1A		/* End of text header */
-
-/*
- * The following structures have little-endian fields denoted by
- * the leading underscore.  Don't access them directly - use inline
- * functions defined below.
- */
-
-/*
- * The binary image to be downloaded consists of series of data blocks.
- * Each block has the following structure.
- */
-struct dblock {
-	__le32 addr;		/* adapter address where to write the block */
-	__le16 len;		/* length of the data only, in bytes */
-	char data[];		/* data to be written */
-} __packed;
-
-/*
- * Plug Data References are located in the image after the last data
- * block.  They refer to areas in the adapter memory where the plug data
- * items with matching ID should be written.
- */
-struct pdr {
-	__le32 id;		/* record ID */
-	__le32 addr;		/* adapter address where to write the data */
-	__le32 len;		/* expected length of the data, in bytes */
-	char next[];		/* next PDR starts here */
-} __packed;
-
-/*
- * Plug Data Items are located in the EEPROM read from the adapter by
- * primary firmware.  They refer to the device-specific data that should
- * be plugged into the secondary firmware.
- */
-struct pdi {
-	__le16 len;		/* length of ID and data, in words */
-	__le16 id;		/* record ID */
-	char data[];		/* plug data */
-} __packed;
-
-/*** FW data block access functions ***/
-
-static inline u32
-dblock_addr(const struct dblock *blk)
-{
-	return le32_to_cpu(blk->addr);
-}
-
-static inline u32
-dblock_len(const struct dblock *blk)
-{
-	return le16_to_cpu(blk->len);
-}
-
-/*** PDR Access functions ***/
-
-static inline u32
-pdr_id(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->id);
-}
-
-static inline u32
-pdr_addr(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->addr);
-}
-
-static inline u32
-pdr_len(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->len);
-}
-
-/*** PDI Access functions ***/
-
-static inline u32
-pdi_id(const struct pdi *pdi)
-{
-	return le16_to_cpu(pdi->id);
-}
-
-/* Return length of the data only, in bytes */
-static inline u32
-pdi_len(const struct pdi *pdi)
-{
-	return 2 * (le16_to_cpu(pdi->len) - 1);
-}
-
-/*** Plug Data Functions ***/
-
-/*
- * Scan PDR for the record with the specified RECORD_ID.
- * If it's not found, return NULL.
- */
-static const struct pdr *
-hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end)
-{
-	const struct pdr *pdr = first_pdr;
-
-	end -= sizeof(struct pdr);
-
-	while (((void *) pdr <= end) &&
-	       (pdr_id(pdr) != PDI_END)) {
-		/*
-		 * PDR area is currently not terminated by PDI_END.
-		 * It's followed by CRC records, which have the type
-		 * field where PDR has length.  The type can be 0 or 1.
-		 */
-		if (pdr_len(pdr) < 2)
-			return NULL;
-
-		/* If the record ID matches, we are done */
-		if (pdr_id(pdr) == record_id)
-			return pdr;
-
-		pdr = (struct pdr *) pdr->next;
-	}
-	return NULL;
-}
-
-/* Scan production data items for a particular entry */
-static const struct pdi *
-hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end)
-{
-	const struct pdi *pdi = first_pdi;
-
-	end -= sizeof(struct pdi);
-
-	while (((void *) pdi <= end) &&
-	       (pdi_id(pdi) != PDI_END)) {
-
-		/* If the record ID matches, we are done */
-		if (pdi_id(pdi) == record_id)
-			return pdi;
-
-		pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
-	}
-	return NULL;
-}
-
-/* Process one Plug Data Item - find corresponding PDR and plug it */
-static int
-hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr,
-		const struct pdi *pdi, const void *pdr_end)
-{
-	const struct pdr *pdr;
-
-	/* Find the PDR corresponding to this PDI */
-	pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end);
-
-	/* No match is found, safe to ignore */
-	if (!pdr)
-		return 0;
-
-	/* Lengths of the data in PDI and PDR must match */
-	if (pdi_len(pdi) != pdr_len(pdr))
-		return -EINVAL;
-
-	/* do the actual plugging */
-	hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
-
-	return 0;
-}
-
-/* Parse PDA and write the records into the adapter
- *
- * Attempt to write every records that is in the specified pda
- * which also has a valid production data record for the firmware.
- */
-int hermes_apply_pda(struct hermes *hw,
-		     const char *first_pdr,
-		     const void *pdr_end,
-		     const __le16 *pda,
-		     const void *pda_end)
-{
-	int ret;
-	const struct pdi *pdi;
-	const struct pdr *pdr;
-
-	pdr = (const struct pdr *) first_pdr;
-	pda_end -= sizeof(struct pdi);
-
-	/* Go through every PDI and plug them into the adapter */
-	pdi = (const struct pdi *) (pda + 2);
-	while (((void *) pdi <= pda_end) &&
-	       (pdi_id(pdi) != PDI_END)) {
-		ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end);
-		if (ret)
-			return ret;
-
-		/* Increment to the next PDI */
-		pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
-	}
-	return 0;
-}
-
-/* Identify the total number of bytes in all blocks
- * including the header data.
- */
-size_t
-hermes_blocks_length(const char *first_block, const void *end)
-{
-	const struct dblock *blk = (const struct dblock *) first_block;
-	int total_len = 0;
-	int len;
-
-	end -= sizeof(*blk);
-
-	/* Skip all blocks to locate Plug Data References
-	 * (Spectrum CS) */
-	while (((void *) blk <= end) &&
-	       (dblock_addr(blk) != BLOCK_END)) {
-		len = dblock_len(blk);
-		total_len += sizeof(*blk) + len;
-		blk = (struct dblock *) &blk->data[len];
-	}
-
-	return total_len;
-}
-
-/*** Hermes programming ***/
-
-/* Program the data blocks */
-int hermes_program(struct hermes *hw, const char *first_block, const void *end)
-{
-	const struct dblock *blk;
-	u32 blkaddr;
-	u32 blklen;
-	int err = 0;
-
-	blk = (const struct dblock *) first_block;
-
-	if ((void *) blk > (end - sizeof(*blk)))
-		return -EIO;
-
-	blkaddr = dblock_addr(blk);
-	blklen = dblock_len(blk);
-
-	while ((blkaddr != BLOCK_END) &&
-	       (((void *) blk + blklen) <= end)) {
-		pr_debug(PFX "Programming block of length %d "
-			 "to address 0x%08x\n", blklen, blkaddr);
-
-		err = hw->ops->program(hw, blk->data, blkaddr, blklen);
-		if (err)
-			break;
-
-		blk = (const struct dblock *) &blk->data[blklen];
-
-		if ((void *) blk > (end - sizeof(*blk)))
-			return -EIO;
-
-		blkaddr = dblock_addr(blk);
-		blklen = dblock_len(blk);
-	}
-	return err;
-}
-
-/*** Default plugging data for Hermes I ***/
-/* Values from wl_lkm_718/hcf/dhf.c */
-
-#define DEFINE_DEFAULT_PDR(pid, length, data)				\
-static const struct {							\
-	__le16 len;							\
-	__le16 id;							\
-	u8 val[length];							\
-} __packed default_pdr_data_##pid = {			\
-	cpu_to_le16((sizeof(default_pdr_data_##pid)/			\
-				sizeof(__le16)) - 1),			\
-	cpu_to_le16(pid),						\
-	data								\
-}
-
-#define DEFAULT_PDR(pid) default_pdr_data_##pid
-
-/*  HWIF Compatibility */
-DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
-
-/* PPPPSign */
-DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
-
-/* PPPPProf */
-DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
-
-/* Antenna diversity */
-DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
-
-/* Modem VCO band Set-up */
-DEFINE_DEFAULT_PDR(0x0160, 28,
-		   "\x00\x00\x00\x00\x00\x00\x00\x00"
-		   "\x00\x00\x00\x00\x00\x00\x00\x00"
-		   "\x00\x00\x00\x00\x00\x00\x00\x00"
-		   "\x00\x00\x00\x00");
-
-/* Modem Rx Gain Table Values */
-DEFINE_DEFAULT_PDR(0x0161, 256,
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
-		   "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
-		   "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
-		   "\x3B\x01\x3A\01\x3A\x01\x39\x01"
-		   "\x39\x01\x38\01\x38\x01\x37\x01"
-		   "\x37\x01\x36\01\x36\x01\x35\x01"
-		   "\x35\x01\x34\01\x34\x01\x33\x01"
-		   "\x33\x01\x32\x01\x32\x01\x31\x01"
-		   "\x31\x01\x30\x01\x30\x01\x7B\x01"
-		   "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
-		   "\x79\x01\x78\x01\x78\x01\x77\x01"
-		   "\x77\x01\x76\x01\x76\x01\x75\x01"
-		   "\x75\x01\x74\x01\x74\x01\x73\x01"
-		   "\x73\x01\x72\x01\x72\x01\x71\x01"
-		   "\x71\x01\x70\x01\x70\x01\x68\x01"
-		   "\x68\x01\x67\x01\x67\x01\x66\x01"
-		   "\x66\x01\x65\x01\x65\x01\x57\x01"
-		   "\x57\x01\x56\x01\x56\x01\x55\x01"
-		   "\x55\x01\x54\x01\x54\x01\x53\x01"
-		   "\x53\x01\x52\x01\x52\x01\x51\x01"
-		   "\x51\x01\x50\x01\x50\x01\x48\x01"
-		   "\x48\x01\x47\x01\x47\x01\x46\x01"
-		   "\x46\x01\x45\x01\x45\x01\x44\x01"
-		   "\x44\x01\x43\x01\x43\x01\x42\x01"
-		   "\x42\x01\x41\x01\x41\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01"
-		   "\x40\x01\x40\x01\x40\x01\x40\x01");
-
-/* Write PDA according to certain rules.
- *
- * For every production data record, look for a previous setting in
- * the pda, and use that.
- *
- * For certain records, use defaults if they are not found in pda.
- */
-int hermes_apply_pda_with_defaults(struct hermes *hw,
-				   const char *first_pdr,
-				   const void *pdr_end,
-				   const __le16 *pda,
-				   const void *pda_end)
-{
-	const struct pdr *pdr = (const struct pdr *) first_pdr;
-	const struct pdi *first_pdi = (const struct pdi *) &pda[2];
-	const struct pdi *pdi;
-	const struct pdi *default_pdi = NULL;
-	const struct pdi *outdoor_pdi;
-	int record_id;
-
-	pdr_end -= sizeof(struct pdr);
-
-	while (((void *) pdr <= pdr_end) &&
-	       (pdr_id(pdr) != PDI_END)) {
-		/*
-		 * For spectrum_cs firmwares,
-		 * PDR area is currently not terminated by PDI_END.
-		 * It's followed by CRC records, which have the type
-		 * field where PDR has length.  The type can be 0 or 1.
-		 */
-		if (pdr_len(pdr) < 2)
-			break;
-		record_id = pdr_id(pdr);
-
-		pdi = hermes_find_pdi(first_pdi, record_id, pda_end);
-		if (pdi)
-			pr_debug(PFX "Found record 0x%04x at %p\n",
-				 record_id, pdi);
-
-		switch (record_id) {
-		case 0x110: /* Modem REFDAC values */
-		case 0x120: /* Modem VGDAC values */
-			outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1,
-						      pda_end);
-			default_pdi = NULL;
-			if (outdoor_pdi) {
-				pdi = outdoor_pdi;
-				pr_debug(PFX
-					 "Using outdoor record 0x%04x at %p\n",
-					 record_id + 1, pdi);
-			}
-			break;
-		case 0x5: /*  HWIF Compatibility */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
-			break;
-		case 0x108: /* PPPPSign */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
-			break;
-		case 0x109: /* PPPPProf */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
-			break;
-		case 0x150: /* Antenna diversity */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
-			break;
-		case 0x160: /* Modem VCO band Set-up */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
-			break;
-		case 0x161: /* Modem Rx Gain Table Values */
-			default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
-			break;
-		default:
-			default_pdi = NULL;
-			break;
-		}
-		if (!pdi && default_pdi) {
-			/* Use default */
-			pdi = default_pdi;
-			pr_debug(PFX "Using default record 0x%04x at %p\n",
-				 record_id, pdi);
-		}
-
-		if (pdi) {
-			/* Lengths of the data in PDI and PDR must match */
-			if ((pdi_len(pdi) == pdr_len(pdr)) &&
-			    ((void *) pdi->data + pdi_len(pdi) < pda_end)) {
-				/* do the actual plugging */
-				hw->ops->program(hw, pdi->data, pdr_addr(pdr),
-						 pdi_len(pdi));
-			}
-		}
-
-		pdr++;
-	}
-	return 0;
-}