tty: cyclades, remove this orphan

The Cyclades driver was orphaned by commit d459883e6c54 (MAINTAINERS:
remove two dead e-mail) 13 years ago. Noone stepped up to take care of
them and to fix all the issues the driver has.

On the top of that, there is no way to obtain the firmware for Z cards
from the vendor as cyclades.com ceased to exist.

So it's time to drop the driver with all its traces.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210302062214.29627-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 364 deletions

diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
deleted file mode 100644
index 05ee0f19448a..000000000000
--- a/include/linux/cyclades.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
- * linux/include/linux/cyclades.h
- *
- * This file was initially written by
- * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
- * Ivan Passos <ivan@cyclades.com>.
- *
- * This file contains the general definitions for the cyclades.c driver
- *$Log: cyclades.h,v $
- *Revision 3.1  2002/01/29 11:36:16  henrique
- *added throttle field on struct cyclades_port to indicate whether the
- *port is throttled or not
- *
- *Revision 3.1  2000/04/19 18:52:52  ivan
- *converted address fields to unsigned long and added fields for physical
- *addresses on cyclades_card structure;
- *
- *Revision 3.0  1998/11/02 14:20:59  ivan
- *added nports field on cyclades_card structure;
- *
- *Revision 2.5  1998/08/03 16:57:01  ivan
- *added cyclades_idle_stats structure;
- * 
- *Revision 2.4  1998/06/01 12:09:53  ivan
- *removed closing_wait2 from cyclades_port structure;
- *
- *Revision 2.3  1998/03/16 18:01:12  ivan
- *changes in the cyclades_port structure to get it closer to the 
- *standard serial port structure;
- *added constants for new ioctls;
- *
- *Revision 2.2  1998/02/17 16:50:00  ivan
- *changes in the cyclades_port structure (addition of shutdown_wait and 
- *chip_rev variables);
- *added constants for new ioctls and for CD1400 rev. numbers.
- *
- *Revision 2.1	1997/10/24 16:03:00  ivan
- *added rflow (which allows enabling the CD1400 special flow control 
- *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
- *cyclades_port structure;
- *added Alpha support
- *
- *Revision 2.0  1997/06/30 10:30:00  ivan
- *added some new doorbell command constants related to IOCTLW and
- *UART error signaling
- *
- *Revision 1.8  1997/06/03 15:30:00  ivan
- *added constant ZFIRM_HLT
- *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
- *
- *Revision 1.7  1997/03/26 10:30:00  daniel
- *new entries at the end of cyclades_port struct to reallocate
- *variables illegally allocated within card memory.
- *
- *Revision 1.6  1996/09/09 18:35:30  bentson
- *fold in changes for Cyclom-Z -- including structures for
- *communicating with board as well modest changes to original
- *structures to support new features.
- *
- *Revision 1.5  1995/11/13 21:13:31  bentson
- *changes suggested by Michael Chastain <mec@duracef.shout.net>
- *to support use of this file in non-kernel applications
- *
- *
- */
-#ifndef _LINUX_CYCLADES_H
-#define _LINUX_CYCLADES_H
-
-#include <uapi/linux/cyclades.h>
-
-
-/* Per card data structure */
-struct cyclades_card {
-	void __iomem *base_addr;
-	union {
-		void __iomem *p9050;
-		struct RUNTIME_9060 __iomem *p9060;
-	} ctl_addr;
-	struct BOARD_CTRL __iomem *board_ctrl;	/* cyz specific */
-	int irq;
-	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
-	unsigned int first_line;	/* minor number of first channel on card */
-	unsigned int nports;	/* Number of ports in the card */
-	int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
-	int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
-	u32 hw_ver;
-	spinlock_t card_lock;
-	struct cyclades_port *ports;
-};
-
-/***************************************
- * Memory access functions/macros      *
- * (required to support Alpha systems) *
- ***************************************/
-
-#define cy_writeb(port,val)     do { writeb((val), (port)); mb(); } while (0)
-#define cy_writew(port,val)     do { writew((val), (port)); mb(); } while (0)
-#define cy_writel(port,val)     do { writel((val), (port)); mb(); } while (0)
-
-/*
- * Statistics counters
- */
-struct cyclades_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
-	int                     magic;
-	struct tty_port		port;
-	struct cyclades_card	*card;
-	union {
-		struct {
-			void __iomem *base_addr;
-		} cyy;
-		struct {
-			struct CH_CTRL __iomem	*ch_ctrl;
-			struct BUF_CTRL __iomem	*buf_ctrl;
-		} cyz;
-	} u;
-	int			line;
-	int			flags; 		/* defined in tty.h */
-	int                     type;		/* UART type */
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int                     cor1,cor2,cor3,cor4,cor5;
-	int                     tbpr,tco,rbpr,rco;
-	int			baud;
-	int			rflow;
-	int			rtsdtr_inv;
-	int			chip_rev;
-	int			custom_divisor;
-	u8			x_char; /* to be pushed out ASAP */
-	int                     breakon;
-	int                     breakoff;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-        int                     default_threshold;
-        int                     default_timeout;
-	unsigned long		rflush_count;
-	struct cyclades_monitor	mon;
-	struct cyclades_idle_stats	idle_stats;
-	struct cyclades_icount	icount;
-	struct completion       shutdown_wait;
-	int throttle;
-#ifdef CONFIG_CYZ_INTR
-	struct timer_list	rx_full_timer;
-#endif
-};
-
-#define	CLOSING_WAIT_DELAY	30*HZ
-#define CY_CLOSING_WAIT_NONE	ASYNC_CLOSING_WAIT_NONE
-#define CY_CLOSING_WAIT_INF	ASYNC_CLOSING_WAIT_INF
-
-
-#define CyMAX_CHIPS_PER_CARD	8
-#define CyMAX_CHAR_FIFO		12
-#define CyPORTS_PER_CHIP	4
-#define	CD1400_MAX_SPEED	115200
-
-#define	CyISA_Ywin	0x2000
-
-#define CyPCI_Ywin 	0x4000
-#define CyPCI_Yctl 	0x80
-#define CyPCI_Zctl 	CTRL_WINDOW_SIZE
-#define CyPCI_Zwin 	0x80000
-#define CyPCI_Ze_win 	(2 * CyPCI_Zwin)
-
-#define PCI_DEVICE_ID_MASK	0x06
-
-/**** CD1400 registers ****/
-
-#define CD1400_REV_G	0x46
-#define CD1400_REV_J	0x48
-
-#define CyRegSize  	0x0400
-#define Cy_HwReset 	0x1400
-#define Cy_ClrIntr 	0x1800
-#define Cy_EpldRev 	0x1e00
-
-/* Global Registers */
-
-#define CyGFRCR		(0x40*2)
-#define      CyRevE		(44)
-#define CyCAR		(0x68*2)
-#define      CyCHAN_0		(0x00)
-#define      CyCHAN_1		(0x01)
-#define      CyCHAN_2		(0x02)
-#define      CyCHAN_3		(0x03)
-#define CyGCR		(0x4B*2)
-#define      CyCH0_SERIAL	(0x00)
-#define      CyCH0_PARALLEL	(0x80)
-#define CySVRR		(0x67*2)
-#define      CySRModem		(0x04)
-#define      CySRTransmit	(0x02)
-#define      CySRReceive	(0x01)
-#define CyRICR		(0x44*2)
-#define CyTICR		(0x45*2)
-#define CyMICR		(0x46*2)
-#define      CyICR0		(0x00)
-#define      CyICR1		(0x01)
-#define      CyICR2		(0x02)
-#define      CyICR3		(0x03)
-#define CyRIR		(0x6B*2)
-#define CyTIR		(0x6A*2)
-#define CyMIR		(0x69*2)
-#define      CyIRDirEq		(0x80)
-#define      CyIRBusy		(0x40)
-#define      CyIRUnfair		(0x20)
-#define      CyIRContext	(0x1C)
-#define      CyIRChannel	(0x03)
-#define CyPPR 		(0x7E*2)
-#define      CyCLOCK_20_1MS	(0x27)
-#define      CyCLOCK_25_1MS	(0x31)
-#define      CyCLOCK_25_5MS	(0xf4)
-#define      CyCLOCK_60_1MS	(0x75)
-#define      CyCLOCK_60_2MS	(0xea)
-
-/* Virtual Registers */
-
-#define CyRIVR		(0x43*2)
-#define CyTIVR		(0x42*2)
-#define CyMIVR		(0x41*2)
-#define      CyIVRMask (0x07)
-#define      CyIVRRxEx (0x07)
-#define      CyIVRRxOK (0x03)
-#define      CyIVRTxOK (0x02)
-#define      CyIVRMdmOK (0x01)
-#define CyTDR		(0x63*2)
-#define CyRDSR		(0x62*2)
-#define      CyTIMEOUT		(0x80)
-#define      CySPECHAR		(0x70)
-#define      CyBREAK		(0x08)
-#define      CyPARITY		(0x04)
-#define      CyFRAME		(0x02)
-#define      CyOVERRUN		(0x01)
-#define CyMISR		(0x4C*2)
-/* see CyMCOR_ and CyMSVR_ for bits*/
-#define CyEOSRR		(0x60*2)
-
-/* Channel Registers */
-
-#define CyLIVR		(0x18*2)
-#define      CyMscsr		(0x01)
-#define      CyTdsr		(0x02)
-#define      CyRgdsr		(0x03)
-#define      CyRedsr		(0x07)
-#define CyCCR		(0x05*2)
-/* Format 1 */
-#define      CyCHAN_RESET	(0x80)
-#define      CyCHIP_RESET	(0x81)
-#define      CyFlushTransFIFO	(0x82)
-/* Format 2 */
-#define      CyCOR_CHANGE	(0x40)
-#define      CyCOR1ch		(0x02)
-#define      CyCOR2ch		(0x04)
-#define      CyCOR3ch		(0x08)
-/* Format 3 */
-#define      CySEND_SPEC_1	(0x21)
-#define      CySEND_SPEC_2	(0x22)
-#define      CySEND_SPEC_3	(0x23)
-#define      CySEND_SPEC_4	(0x24)
-/* Format 4 */
-#define      CyCHAN_CTL		(0x10)
-#define      CyDIS_RCVR		(0x01)
-#define      CyENB_RCVR		(0x02)
-#define      CyDIS_XMTR		(0x04)
-#define      CyENB_XMTR		(0x08)
-#define CySRER		(0x06*2)
-#define      CyMdmCh		(0x80)
-#define      CyRxData		(0x10)
-#define      CyTxRdy		(0x04)
-#define      CyTxMpty		(0x02)
-#define      CyNNDT		(0x01)
-#define CyCOR1		(0x08*2)
-#define      CyPARITY_NONE	(0x00)
-#define      CyPARITY_0		(0x20)
-#define      CyPARITY_1		(0xA0)
-#define      CyPARITY_E		(0x40)
-#define      CyPARITY_O		(0xC0)
-#define      Cy_1_STOP		(0x00)
-#define      Cy_1_5_STOP	(0x04)
-#define      Cy_2_STOP		(0x08)
-#define      Cy_5_BITS		(0x00)
-#define      Cy_6_BITS		(0x01)
-#define      Cy_7_BITS		(0x02)
-#define      Cy_8_BITS		(0x03)
-#define CyCOR2		(0x09*2)
-#define      CyIXM		(0x80)
-#define      CyTxIBE		(0x40)
-#define      CyETC		(0x20)
-#define      CyAUTO_TXFL	(0x60)
-#define      CyLLM		(0x10)
-#define      CyRLM		(0x08)
-#define      CyRtsAO		(0x04)
-#define      CyCtsAE		(0x02)
-#define      CyDsrAE		(0x01)
-#define CyCOR3		(0x0A*2)
-#define      CySPL_CH_DRANGE	(0x80)  /* special character detect range */
-#define      CySPL_CH_DET1	(0x40)  /* enable special character detection
-                                                               on SCHR4-SCHR3 */
-#define      CyFL_CTRL_TRNSP	(0x20)  /* Flow Control Transparency */
-#define      CySPL_CH_DET2	(0x10)  /* Enable special character detection
-                                                               on SCHR2-SCHR1 */
-#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
-#define CyCOR4		(0x1E*2)
-#define CyCOR5		(0x1F*2)
-#define CyCCSR		(0x0B*2)
-#define      CyRxEN		(0x80)
-#define      CyRxFloff		(0x40)
-#define      CyRxFlon		(0x20)
-#define      CyTxEN		(0x08)
-#define      CyTxFloff		(0x04)
-#define      CyTxFlon		(0x02)
-#define CyRDCR		(0x0E*2)
-#define CySCHR1		(0x1A*2)
-#define CySCHR2 	(0x1B*2)
-#define CySCHR3		(0x1C*2)
-#define CySCHR4		(0x1D*2)
-#define CySCRL		(0x22*2)
-#define CySCRH		(0x23*2)
-#define CyLNC		(0x24*2)
-#define CyMCOR1 	(0x15*2)
-#define CyMCOR2		(0x16*2)
-#define CyRTPR		(0x21*2)
-#define CyMSVR1		(0x6C*2)
-#define CyMSVR2		(0x6D*2)
-#define      CyANY_DELTA	(0xF0)
-#define      CyDSR		(0x80)
-#define      CyCTS		(0x40)
-#define      CyRI		(0x20)
-#define      CyDCD		(0x10)
-#define      CyDTR              (0x02)
-#define      CyRTS              (0x01)
-#define CyPVSR		(0x6F*2)
-#define CyRBPR		(0x78*2)
-#define CyRCOR		(0x7C*2)
-#define CyTBPR		(0x72*2)
-#define CyTCOR		(0x76*2)
-
-/* Custom Registers */
-
-#define	CyPLX_VER	(0x3400)
-#define	PLX_9050	0x0b
-#define	PLX_9060	0x0c
-#define	PLX_9080	0x0d
-
-/***************************************************************************/
-
-#endif /* _LINUX_CYCLADES_H */