Merge tag 'mac80211-next-for-net-next-2020-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Another set of changes:
 * HE ranging (fine timing measurement) API support
 * hwsim gets virtio support, for use with wmediumd,
   to be able to simulate with multiple machines
 * eapol-over-nl80211 improvements to exclude preauth
 * IBSS reset support, to recover connections from
   userspace
 * and various others.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 109 insertions, 6 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f7c84c32ba39..c78bd4ff9e33 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -7,7 +7,7 @@
  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014 Intel Mobile Communications GmbH
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
  */
 
 #include <linux/netdevice.h>
@@ -924,6 +924,7 @@ struct cfg80211_crypto_settings {
 	__be16 control_port_ethertype;
 	bool control_port_no_encrypt;
 	bool control_port_over_nl80211;
+	bool control_port_no_preauth;
 	struct key_params *wep_keys;
 	int wep_tx_key;
 	const u8 *psk;
@@ -1054,6 +1055,7 @@ enum cfg80211_ap_settings_flags {
  * @flags: flags, as defined in enum cfg80211_ap_settings_flags
  * @he_obss_pd: OBSS Packet Detection settings
  * @he_bss_color: BSS Color settings
+ * @he_oper: HE operation IE (or %NULL if HE isn't enabled)
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -1078,6 +1080,7 @@ struct cfg80211_ap_settings {
 	const struct ieee80211_ht_cap *ht_cap;
 	const struct ieee80211_vht_cap *vht_cap;
 	const struct ieee80211_he_cap_elem *he_cap;
+	const struct ieee80211_he_operation *he_oper;
 	bool ht_required, vht_required;
 	bool twt_responder;
 	u32 flags;
@@ -2696,6 +2699,17 @@ enum wiphy_params_flags {
  * @cache_id: 2-octet cache identifier advertized by a FILS AP identifying the
  *	scope of PMKSA. This is valid only if @ssid_len is non-zero (may be
  *	%NULL).
+ * @pmk_lifetime: Maximum lifetime for PMKSA in seconds
+ *	(dot11RSNAConfigPMKLifetime) or 0 if not specified.
+ *	The configured PMKSA must not be used for PMKSA caching after
+ *	expiration and any keys derived from this PMK become invalid on
+ *	expiration, i.e., the current association must be dropped if the PMK
+ *	used for it expires.
+ * @pmk_reauth_threshold: Threshold time for reauthentication (percentage of
+ *	PMK lifetime, dot11RSNAConfigPMKReauthThreshold) or 0 if not specified.
+ *	Drivers are expected to trigger a full authentication instead of using
+ *	this PMKSA for caching when reassociating to a new BSS after this
+ *	threshold to generate a new PMK before the current one expires.
  */
 struct cfg80211_pmksa {
 	const u8 *bssid;
@@ -2705,6 +2719,8 @@ struct cfg80211_pmksa {
 	const u8 *ssid;
 	size_t ssid_len;
 	const u8 *cache_id;
+	u32 pmk_lifetime;
+	u8 pmk_reauth_threshold;
 };
 
 /**
@@ -3269,6 +3285,12 @@ struct cfg80211_pmsr_result {
  * @ftmr_retries: number of retries for FTM request
  * @request_lci: request LCI information
  * @request_civicloc: request civic location information
+ * @trigger_based: use trigger based ranging for the measurement
+ *		 If neither @trigger_based nor @non_trigger_based is set,
+ *		 EDCA based ranging will be used.
+ * @non_trigger_based: use non trigger based ranging for the measurement
+ *		 If neither @trigger_based nor @non_trigger_based is set,
+ *		 EDCA based ranging will be used.
  *
  * See also nl80211 for the respective attribute documentation.
  */
@@ -3278,7 +3300,9 @@ struct cfg80211_pmsr_ftm_request_peer {
 	u8 requested:1,
 	   asap:1,
 	   request_lci:1,
-	   request_civicloc:1;
+	   request_civicloc:1,
+	   trigger_based:1,
+	   non_trigger_based:1;
 	u8 num_bursts_exp;
 	u8 burst_duration;
 	u8 ftms_per_burst;
@@ -3404,7 +3428,7 @@ struct cfg80211_update_owe_info {
  * @set_default_key: set the default key on an interface
  *
  * @set_default_mgmt_key: set the default management frame key on an interface
-
+ *
  * @set_default_beacon_key: set the default Beacon frame key on an interface
  *
  * @set_rekey_data: give the data necessary for GTK rekeying to the driver
@@ -4434,6 +4458,8 @@ struct wiphy_iftype_ext_capab {
  *	forbid using the value 15 to let the responder pick)
  * @ftm.max_ftms_per_burst: maximum FTMs per burst supported (set to 0 if
  *	not limited)
+ * @ftm.trigger_based: trigger based ranging measurement is supported
+ * @ftm.non_trigger_based: non trigger based ranging measurement is supported
  */
 struct cfg80211_pmsr_capabilities {
 	unsigned int max_peers;
@@ -4449,7 +4475,9 @@ struct cfg80211_pmsr_capabilities {
 		   asap:1,
 		   non_asap:1,
 		   request_lci:1,
-		   request_civicloc:1;
+		   request_civicloc:1,
+		   trigger_based:1,
+		   non_trigger_based:1;
 	} ftm;
 };
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5ef34a2ba3c7..b6b4de0e4b5e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1987,6 +1987,7 @@ struct ieee80211_sta_txpwr {
  * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
  * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
  * @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
+ * @txpwr: the station tx power configuration
  * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
  *	the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
  */
@@ -3451,6 +3452,10 @@ enum ieee80211_reconfig_type {
  *	in AP mode, this callback will not be called when the flag
  *	%IEEE80211_HW_AP_LINK_PS is set. Must be atomic.
  *
+ * @sta_set_txpwr: Configure the station tx power. This callback set the tx
+ *	power for the station.
+ *	This callback can sleep.
+ *
  * @sta_state: Notifies low level driver about state transition of a
  *	station (which can be the AP, a client, IBSS/WDS/mesh peer etc.)
  *	This callback is mutually exclusive with @sta_add/@sta_remove.
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b002ef2060fa..2b691161830f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -1632,7 +1632,8 @@ enum nl80211_commands {
  *	flag is included, then control port frames are sent over NL80211 instead
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
- *	flag.
+ *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
+ *	frames are not forwared over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -2442,6 +2443,33 @@ enum nl80211_commands {
  *	on output (in wiphy attributes) it contains only the feature sub-
  *	attributes.
  *
+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
+ *	port in order to forward/receive them as ordinary data frames.
+ *
+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
+ *	dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
+ *	An optional parameter configured through %NL80211_CMD_SET_PMKSA.
+ *	Drivers that trigger roaming need to know the lifetime of the
+ *	configured PMKSA for triggering the full vs. PMKSA caching based
+ *	authentication. This timeout helps authentication methods like SAE,
+ *	where PMK gets updated only by going through a full (new SAE)
+ *	authentication instead of getting updated during an association for EAP
+ *	authentication. No new full authentication within the PMK expiry shall
+ *	result in a disassociation at the end of the lifetime.
+ *
+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
+ *	terms of percentage of %NL80211_ATTR_PMK_LIFETIME
+ *	(u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
+ *	parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
+ *	driver to trigger a full authentication roam (without PMKSA caching)
+ *	after the reauthentication threshold time, but before the PMK lifetime
+ *	has expired.
+ *
+ *	Authentication methods like SAE need to be able to generate a new PMKSA
+ *	entry without having to force a disconnection after the PMK timeout. If
+ *	no roaming occurs between the reauth threshold and PMK expiration,
+ *	disassociation is still forced.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2912,6 +2940,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_TID_CONFIG,
 
+	NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
+
+	NL80211_ATTR_PMK_LIFETIME,
+	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -5642,6 +5675,15 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
  *	and can receive key configuration for BIGTK using key indexes 6 and 7.
  *
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
+ *	forwarding of preauth frames over the control port. They are then
+ *	handled as ordinary data frames.
+ *
+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
+ *
+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
+ *      in IBSS mode, essentially by dropping their state.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5690,6 +5732,9 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_VLAN_OFFLOAD,
 	NL80211_EXT_FEATURE_AQL,
 	NL80211_EXT_FEATURE_BEACON_PROTECTION,
+	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
+	NL80211_EXT_FEATURE_PROTECTED_TWT,
+	NL80211_EXT_FEATURE_DEL_IBSS_STA,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6312,12 +6357,14 @@ enum nl80211_ftm_responder_stats {
  * @NL80211_PREAMBLE_HT: HT preamble
  * @NL80211_PREAMBLE_VHT: VHT preamble
  * @NL80211_PREAMBLE_DMG: DMG preamble
+ * @NL80211_PREAMBLE_HE: HE preamble
  */
 enum nl80211_preamble {
 	NL80211_PREAMBLE_LEGACY,
 	NL80211_PREAMBLE_HT,
 	NL80211_PREAMBLE_VHT,
 	NL80211_PREAMBLE_DMG,
+	NL80211_PREAMBLE_HE,
 };
 
 /**
@@ -6510,6 +6557,10 @@ enum nl80211_peer_measurement_attrs {
  *	is valid)
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
  *	the maximum FTMs per burst (if not present anything is valid)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
+ *	trigger based ranging measurement is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
+ *	if non trigger based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -6525,6 +6576,8 @@ enum nl80211_peer_measurement_ftm_capa {
 	NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
 	NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
 	NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
+	NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
+	NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_CAPA_ATTR,
@@ -6554,6 +6607,20 @@ enum nl80211_peer_measurement_ftm_capa {
  * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
  * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
  *	(flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
+ *	measurement (flag).
+ *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
+ *	mutually exclusive.
+ *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ *	ranging will be used.
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ *	ranging measurement (flag)
+ *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
+ *	mutually exclusive.
+ *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+ *	ranging will be used.
  *
  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
@@ -6570,6 +6637,8 @@ enum nl80211_peer_measurement_ftm_req {
 	NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index 585e07b27333..ecc27a17401a 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -46,5 +46,6 @@
 #define VIRTIO_ID_IOMMU        23 /* virtio IOMMU */
 #define VIRTIO_ID_FS           26 /* virtio filesystem */
 #define VIRTIO_ID_PMEM         27 /* virtio pmem */
+#define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
 
 #endif /* _LINUX_VIRTIO_IDS_H */