Merge tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "There's been quite a lot of generic activity here, but more
  administrative than featuers. We also have a bunch of new drivers,
  including one that's part of a MFD so we pulled in the core parts of
  that:

   - Lots of work from both Yang Yingliang and Andy Shevchenko on moving
     to host/device/controller based terminology for devices.

   - QuadSPI SPI support for Allwinner sun6i.

   - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
     QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
  spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
  spi: spi-sn-f-ospi: switch to use modern name
  spi: sifive: switch to use modern name
  spi: sh: switch to use modern name
  spi: sh-sci: switch to use modern name
  spi: sh-msiof: switch to use modern name
  spi: sh-hspi: switch to use modern name
  spi: sc18is602: switch to use modern name
  spi: s3c64xx: switch to use modern name
  spi: rzv2m-csi: switch to use devm_spi_alloc_host()
  spi: rspi: switch to use spi_alloc_host()
  spi: rockchip: switch to use modern name
  spi: rockchip-sfc: switch to use modern name
  spi: realtek-rtl: switch to use devm_spi_alloc_host()
  spi: rb4xx: switch to use modern name
  spi: qup: switch to use modern name
  spi: spi-qcom-qspi: switch to use modern name
  spi: pxa2xx: switch to use modern name
  spi: ppc4xx: switch to use modern name
  spi: spl022: switch to use modern name
  ...

8 files changed, 1400 insertions, 85 deletions

diff --git a/include/linux/mfd/cs42l43-regs.h b/include/linux/mfd/cs42l43-regs.h
new file mode 100644
index 000000000000..c39a49269cb7
--- /dev/null
+++ b/include/linux/mfd/cs42l43-regs.h
@@ -0,0 +1,1184 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * cs42l43 register definitions
+ *
+ * Copyright (c) 2022-2023 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ */
+
+#ifndef CS42L43_CORE_REGS_H
+#define CS42L43_CORE_REGS_H
+
+/* Registers */
+#define CS42L43_GEN_INT_STAT_1					0x000000C0
+#define CS42L43_GEN_INT_MASK_1					0x000000C1
+#define CS42L43_DEVID						0x00003000
+#define CS42L43_REVID						0x00003004
+#define CS42L43_RELID						0x0000300C
+#define CS42L43_SFT_RESET					0x00003020
+#define CS42L43_DRV_CTRL1					0x00006004
+#define CS42L43_DRV_CTRL3					0x0000600C
+#define CS42L43_DRV_CTRL4					0x00006010
+#define CS42L43_DRV_CTRL_5					0x00006014
+#define CS42L43_GPIO_CTRL1					0x00006034
+#define CS42L43_GPIO_CTRL2					0x00006038
+#define CS42L43_GPIO_STS					0x0000603C
+#define CS42L43_GPIO_FN_SEL					0x00006040
+#define CS42L43_MCLK_SRC_SEL					0x00007004
+#define CS42L43_CCM_BLK_CLK_CONTROL				0x00007010
+#define CS42L43_SAMPLE_RATE1					0x00007014
+#define CS42L43_SAMPLE_RATE2					0x00007018
+#define CS42L43_SAMPLE_RATE3					0x0000701C
+#define CS42L43_SAMPLE_RATE4					0x00007020
+#define CS42L43_PLL_CONTROL					0x00007034
+#define CS42L43_FS_SELECT1					0x00007038
+#define CS42L43_FS_SELECT2					0x0000703C
+#define CS42L43_FS_SELECT3					0x00007040
+#define CS42L43_FS_SELECT4					0x00007044
+#define CS42L43_PDM_CONTROL					0x0000704C
+#define CS42L43_ASP_CLK_CONFIG1					0x00007058
+#define CS42L43_ASP_CLK_CONFIG2					0x0000705C
+#define CS42L43_OSC_DIV_SEL					0x00007068
+#define CS42L43_ADC_B_CTRL1					0x00008000
+#define CS42L43_ADC_B_CTRL2					0x00008004
+#define CS42L43_DECIM_HPF_WNF_CTRL1				0x0000803C
+#define CS42L43_DECIM_HPF_WNF_CTRL2				0x00008040
+#define CS42L43_DECIM_HPF_WNF_CTRL3				0x00008044
+#define CS42L43_DECIM_HPF_WNF_CTRL4				0x00008048
+#define CS42L43_DMIC_PDM_CTRL					0x0000804C
+#define CS42L43_DECIM_VOL_CTRL_CH1_CH2				0x00008050
+#define CS42L43_DECIM_VOL_CTRL_CH3_CH4				0x00008054
+#define CS42L43_DECIM_VOL_CTRL_UPDATE				0x00008058
+#define CS42L43_INTP_VOLUME_CTRL1				0x00009008
+#define CS42L43_INTP_VOLUME_CTRL2				0x0000900C
+#define CS42L43_AMP1_2_VOL_RAMP					0x00009010
+#define CS42L43_ASP_CTRL					0x0000A000
+#define CS42L43_ASP_FSYNC_CTRL1					0x0000A004
+#define CS42L43_ASP_FSYNC_CTRL2					0x0000A008
+#define CS42L43_ASP_FSYNC_CTRL3					0x0000A00C
+#define CS42L43_ASP_FSYNC_CTRL4					0x0000A010
+#define CS42L43_ASP_DATA_CTRL					0x0000A018
+#define CS42L43_ASP_RX_EN					0x0000A020
+#define CS42L43_ASP_TX_EN					0x0000A024
+#define CS42L43_ASP_RX_CH1_CTRL					0x0000A028
+#define CS42L43_ASP_RX_CH2_CTRL					0x0000A02C
+#define CS42L43_ASP_RX_CH3_CTRL					0x0000A030
+#define CS42L43_ASP_RX_CH4_CTRL					0x0000A034
+#define CS42L43_ASP_RX_CH5_CTRL					0x0000A038
+#define CS42L43_ASP_RX_CH6_CTRL					0x0000A03C
+#define CS42L43_ASP_TX_CH1_CTRL					0x0000A068
+#define CS42L43_ASP_TX_CH2_CTRL					0x0000A06C
+#define CS42L43_ASP_TX_CH3_CTRL					0x0000A070
+#define CS42L43_ASP_TX_CH4_CTRL					0x0000A074
+#define CS42L43_ASP_TX_CH5_CTRL					0x0000A078
+#define CS42L43_ASP_TX_CH6_CTRL					0x0000A07C
+#define CS42L43_OTP_REVISION_ID					0x0000B02C
+#define CS42L43_ASPTX1_INPUT					0x0000C200
+#define CS42L43_ASPTX2_INPUT					0x0000C210
+#define CS42L43_ASPTX3_INPUT					0x0000C220
+#define CS42L43_ASPTX4_INPUT					0x0000C230
+#define CS42L43_ASPTX5_INPUT					0x0000C240
+#define CS42L43_ASPTX6_INPUT					0x0000C250
+#define CS42L43_SWIRE_DP1_CH1_INPUT				0x0000C280
+#define CS42L43_SWIRE_DP1_CH2_INPUT				0x0000C290
+#define CS42L43_SWIRE_DP1_CH3_INPUT				0x0000C2A0
+#define CS42L43_SWIRE_DP1_CH4_INPUT				0x0000C2B0
+#define CS42L43_SWIRE_DP2_CH1_INPUT				0x0000C2C0
+#define CS42L43_SWIRE_DP2_CH2_INPUT				0x0000C2D0
+#define CS42L43_SWIRE_DP3_CH1_INPUT				0x0000C2E0
+#define CS42L43_SWIRE_DP3_CH2_INPUT				0x0000C2F0
+#define CS42L43_SWIRE_DP4_CH1_INPUT				0x0000C300
+#define CS42L43_SWIRE_DP4_CH2_INPUT				0x0000C310
+#define CS42L43_ASRC_INT1_INPUT1				0x0000C400
+#define CS42L43_ASRC_INT2_INPUT1				0x0000C410
+#define CS42L43_ASRC_INT3_INPUT1				0x0000C420
+#define CS42L43_ASRC_INT4_INPUT1				0x0000C430
+#define CS42L43_ASRC_DEC1_INPUT1				0x0000C440
+#define CS42L43_ASRC_DEC2_INPUT1				0x0000C450
+#define CS42L43_ASRC_DEC3_INPUT1				0x0000C460
+#define CS42L43_ASRC_DEC4_INPUT1				0x0000C470
+#define CS42L43_ISRC1INT1_INPUT1				0x0000C500
+#define CS42L43_ISRC1INT2_INPUT1				0x0000C510
+#define CS42L43_ISRC1DEC1_INPUT1				0x0000C520
+#define CS42L43_ISRC1DEC2_INPUT1				0x0000C530
+#define CS42L43_ISRC2INT1_INPUT1				0x0000C540
+#define CS42L43_ISRC2INT2_INPUT1				0x0000C550
+#define CS42L43_ISRC2DEC1_INPUT1				0x0000C560
+#define CS42L43_ISRC2DEC2_INPUT1				0x0000C570
+#define CS42L43_EQ1MIX_INPUT1					0x0000C580
+#define CS42L43_EQ1MIX_INPUT2					0x0000C584
+#define CS42L43_EQ1MIX_INPUT3					0x0000C588
+#define CS42L43_EQ1MIX_INPUT4					0x0000C58C
+#define CS42L43_EQ2MIX_INPUT1					0x0000C590
+#define CS42L43_EQ2MIX_INPUT2					0x0000C594
+#define CS42L43_EQ2MIX_INPUT3					0x0000C598
+#define CS42L43_EQ2MIX_INPUT4					0x0000C59C
+#define CS42L43_SPDIF1_INPUT1					0x0000C600
+#define CS42L43_SPDIF2_INPUT1					0x0000C610
+#define CS42L43_AMP1MIX_INPUT1					0x0000C620
+#define CS42L43_AMP1MIX_INPUT2					0x0000C624
+#define CS42L43_AMP1MIX_INPUT3					0x0000C628
+#define CS42L43_AMP1MIX_INPUT4					0x0000C62C
+#define CS42L43_AMP2MIX_INPUT1					0x0000C630
+#define CS42L43_AMP2MIX_INPUT2					0x0000C634
+#define CS42L43_AMP2MIX_INPUT3					0x0000C638
+#define CS42L43_AMP2MIX_INPUT4					0x0000C63C
+#define CS42L43_AMP3MIX_INPUT1					0x0000C640
+#define CS42L43_AMP3MIX_INPUT2					0x0000C644
+#define CS42L43_AMP3MIX_INPUT3					0x0000C648
+#define CS42L43_AMP3MIX_INPUT4					0x0000C64C
+#define CS42L43_AMP4MIX_INPUT1					0x0000C650
+#define CS42L43_AMP4MIX_INPUT2					0x0000C654
+#define CS42L43_AMP4MIX_INPUT3					0x0000C658
+#define CS42L43_AMP4MIX_INPUT4					0x0000C65C
+#define CS42L43_ASRC_INT_ENABLES				0x0000E000
+#define CS42L43_ASRC_DEC_ENABLES				0x0000E004
+#define CS42L43_PDNCNTL						0x00010000
+#define CS42L43_RINGSENSE_DEB_CTRL				0x0001001C
+#define CS42L43_TIPSENSE_DEB_CTRL				0x00010020
+#define CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS			0x00010028
+#define CS42L43_HS2						0x00010040
+#define CS42L43_HS_STAT						0x00010048
+#define CS42L43_MCU_SW_INTERRUPT				0x00010094
+#define CS42L43_STEREO_MIC_CTRL					0x000100A4
+#define CS42L43_STEREO_MIC_CLAMP_CTRL				0x000100C4
+#define CS42L43_BLOCK_EN2					0x00010104
+#define CS42L43_BLOCK_EN3					0x00010108
+#define CS42L43_BLOCK_EN4					0x0001010C
+#define CS42L43_BLOCK_EN5					0x00010110
+#define CS42L43_BLOCK_EN6					0x00010114
+#define CS42L43_BLOCK_EN7					0x00010118
+#define CS42L43_BLOCK_EN8					0x0001011C
+#define CS42L43_BLOCK_EN9					0x00010120
+#define CS42L43_BLOCK_EN10					0x00010124
+#define CS42L43_BLOCK_EN11					0x00010128
+#define CS42L43_TONE_CH1_CTRL					0x00010134
+#define CS42L43_TONE_CH2_CTRL					0x00010138
+#define CS42L43_MIC_DETECT_CONTROL_1				0x00011074
+#define CS42L43_DETECT_STATUS_1					0x0001107C
+#define CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL		0x00011090
+#define CS42L43_MIC_DETECT_CONTROL_ANDROID			0x000110B0
+#define CS42L43_ISRC1_CTRL					0x00012004
+#define CS42L43_ISRC2_CTRL					0x00013004
+#define CS42L43_CTRL_REG					0x00014000
+#define CS42L43_FDIV_FRAC					0x00014004
+#define CS42L43_CAL_RATIO					0x00014008
+#define CS42L43_SPI_CLK_CONFIG1					0x00016004
+#define CS42L43_SPI_CONFIG1					0x00016010
+#define CS42L43_SPI_CONFIG2					0x00016014
+#define CS42L43_SPI_CONFIG3					0x00016018
+#define CS42L43_SPI_CONFIG4					0x00016024
+#define CS42L43_SPI_STATUS1					0x00016100
+#define CS42L43_SPI_STATUS2					0x00016104
+#define CS42L43_TRAN_CONFIG1					0x00016200
+#define CS42L43_TRAN_CONFIG2					0x00016204
+#define CS42L43_TRAN_CONFIG3					0x00016208
+#define CS42L43_TRAN_CONFIG4					0x0001620C
+#define CS42L43_TRAN_CONFIG5					0x00016220
+#define CS42L43_TRAN_CONFIG6					0x00016224
+#define CS42L43_TRAN_CONFIG7					0x00016228
+#define CS42L43_TRAN_CONFIG8					0x0001622C
+#define CS42L43_TRAN_STATUS1					0x00016300
+#define CS42L43_TRAN_STATUS2					0x00016304
+#define CS42L43_TRAN_STATUS3					0x00016308
+#define CS42L43_TX_DATA						0x00016400
+#define CS42L43_RX_DATA						0x00016600
+#define CS42L43_DACCNFG1					0x00017000
+#define CS42L43_DACCNFG2					0x00017004
+#define CS42L43_HPPATHVOL					0x0001700C
+#define CS42L43_PGAVOL						0x00017014
+#define CS42L43_LOADDETRESULTS					0x00017018
+#define CS42L43_LOADDETENA					0x00017024
+#define CS42L43_CTRL						0x00017028
+#define CS42L43_COEFF_DATA_IN0					0x00018000
+#define CS42L43_COEFF_RD_WR0					0x00018008
+#define CS42L43_INIT_DONE0					0x00018010
+#define CS42L43_START_EQZ0					0x00018014
+#define CS42L43_MUTE_EQ_IN0					0x0001801C
+#define CS42L43_DECIM_INT					0x0001B000
+#define CS42L43_EQ_INT						0x0001B004
+#define CS42L43_ASP_INT						0x0001B008
+#define CS42L43_PLL_INT						0x0001B00C
+#define CS42L43_SOFT_INT					0x0001B010
+#define CS42L43_SWIRE_INT					0x0001B014
+#define CS42L43_MSM_INT						0x0001B018
+#define CS42L43_ACC_DET_INT					0x0001B01C
+#define CS42L43_I2C_TGT_INT					0x0001B020
+#define CS42L43_SPI_MSTR_INT					0x0001B024
+#define CS42L43_SW_TO_SPI_BRIDGE_INT				0x0001B028
+#define CS42L43_OTP_INT						0x0001B02C
+#define CS42L43_CLASS_D_AMP_INT					0x0001B030
+#define CS42L43_GPIO_INT					0x0001B034
+#define CS42L43_ASRC_INT					0x0001B038
+#define CS42L43_HPOUT_INT					0x0001B03C
+#define CS42L43_DECIM_MASK					0x0001B0A0
+#define CS42L43_EQ_MIX_MASK					0x0001B0A4
+#define CS42L43_ASP_MASK					0x0001B0A8
+#define CS42L43_PLL_MASK					0x0001B0AC
+#define CS42L43_SOFT_MASK					0x0001B0B0
+#define CS42L43_SWIRE_MASK					0x0001B0B4
+#define CS42L43_MSM_MASK					0x0001B0B8
+#define CS42L43_ACC_DET_MASK					0x0001B0BC
+#define CS42L43_I2C_TGT_MASK					0x0001B0C0
+#define CS42L43_SPI_MSTR_MASK					0x0001B0C4
+#define CS42L43_SW_TO_SPI_BRIDGE_MASK				0x0001B0C8
+#define CS42L43_OTP_MASK					0x0001B0CC
+#define CS42L43_CLASS_D_AMP_MASK				0x0001B0D0
+#define CS42L43_GPIO_INT_MASK					0x0001B0D4
+#define CS42L43_ASRC_MASK					0x0001B0D8
+#define CS42L43_HPOUT_MASK					0x0001B0DC
+#define CS42L43_DECIM_INT_SHADOW				0x0001B300
+#define CS42L43_EQ_MIX_INT_SHADOW				0x0001B304
+#define CS42L43_ASP_INT_SHADOW					0x0001B308
+#define CS42L43_PLL_INT_SHADOW					0x0001B30C
+#define CS42L43_SOFT_INT_SHADOW					0x0001B310
+#define CS42L43_SWIRE_INT_SHADOW				0x0001B314
+#define CS42L43_MSM_INT_SHADOW					0x0001B318
+#define CS42L43_ACC_DET_INT_SHADOW				0x0001B31C
+#define CS42L43_I2C_TGT_INT_SHADOW				0x0001B320
+#define CS42L43_SPI_MSTR_INT_SHADOW				0x0001B324
+#define CS42L43_SW_TO_SPI_BRIDGE_SHADOW				0x0001B328
+#define CS42L43_OTP_INT_SHADOW					0x0001B32C
+#define CS42L43_CLASS_D_AMP_INT_SHADOW				0x0001B330
+#define CS42L43_GPIO_SHADOW					0x0001B334
+#define CS42L43_ASRC_SHADOW					0x0001B338
+#define CS42L43_HP_OUT_SHADOW					0x0001B33C
+#define CS42L43_BOOT_CONTROL					0x00101000
+#define CS42L43_BLOCK_EN					0x00101008
+#define CS42L43_SHUTTER_CONTROL					0x0010100C
+#define CS42L43_MCU_SW_REV					0x00114000
+#define CS42L43_PATCH_START_ADDR				0x00114004
+#define CS42L43_NEED_CONFIGS					0x0011400C
+#define CS42L43_BOOT_STATUS					0x0011401C
+#define CS42L43_FW_SH_BOOT_CFG_NEED_CONFIGS			0x0011F8F8
+#define CS42L43_FW_MISSION_CTRL_NEED_CONFIGS			0x0011FE00
+#define CS42L43_FW_MISSION_CTRL_HAVE_CONFIGS			0x0011FE04
+#define CS42L43_FW_MISSION_CTRL_MM_CTRL_SELECTION		0x0011FE0C
+#define CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_REG			0x0011FE10
+#define CS42L43_MCU_RAM_MAX					0x0011FFFF
+
+/* CS42L43_DEVID */
+#define CS42L43_DEVID_VAL					0x00042A43
+
+/* CS42L43_GEN_INT_STAT_1 */
+#define CS42L43_INT_STAT_GEN1_MASK				0x00000001
+#define CS42L43_INT_STAT_GEN1_SHIFT				0
+
+/* CS42L43_SFT_RESET */
+#define CS42L43_SFT_RESET_MASK					0xFF000000
+#define CS42L43_SFT_RESET_SHIFT					24
+
+#define CS42L43_SFT_RESET_VAL					0x5A000000
+
+/* CS42L43_DRV_CTRL1 */
+#define CS42L43_ASP_DOUT_DRV_MASK				0x00038000
+#define CS42L43_ASP_DOUT_DRV_SHIFT				15
+#define CS42L43_ASP_FSYNC_DRV_MASK				0x00000E00
+#define CS42L43_ASP_FSYNC_DRV_SHIFT				9
+#define CS42L43_ASP_BCLK_DRV_MASK				0x000001C0
+#define CS42L43_ASP_BCLK_DRV_SHIFT				6
+
+/* CS42L43_DRV_CTRL3 */
+#define CS42L43_I2C_ADDR_DRV_MASK				0x30000000
+#define CS42L43_I2C_ADDR_DRV_SHIFT				28
+#define CS42L43_I2C_SDA_DRV_MASK				0x0C000000
+#define CS42L43_I2C_SDA_DRV_SHIFT				26
+#define CS42L43_PDMOUT2_CLK_DRV_MASK				0x00E00000
+#define CS42L43_PDMOUT2_CLK_DRV_SHIFT				21
+#define CS42L43_PDMOUT2_DATA_DRV_MASK				0x001C0000
+#define CS42L43_PDMOUT2_DATA_DRV_SHIFT				18
+#define CS42L43_PDMOUT1_CLK_DRV_MASK				0x00038000
+#define CS42L43_PDMOUT1_CLK_DRV_SHIFT				15
+#define CS42L43_PDMOUT1_DATA_DRV_MASK				0x00007000
+#define CS42L43_PDMOUT1_DATA_DRV_SHIFT				12
+#define CS42L43_SPI_MISO_DRV_MASK				0x00000038
+#define CS42L43_SPI_MISO_DRV_SHIFT				3
+
+/* CS42L43_DRV_CTRL4 */
+#define CS42L43_GPIO3_DRV_MASK					0x00000E00
+#define CS42L43_GPIO3_DRV_SHIFT					9
+#define CS42L43_GPIO2_DRV_MASK					0x000001C0
+#define CS42L43_GPIO2_DRV_SHIFT					6
+#define CS42L43_GPIO1_DRV_MASK					0x00000038
+#define CS42L43_GPIO1_DRV_SHIFT					3
+
+/* CS42L43_DRV_CTRL_5 */
+#define CS42L43_I2C_SCL_DRV_MASK				0x18000000
+#define CS42L43_I2C_SCL_DRV_SHIFT				27
+#define CS42L43_SPI_SCK_DRV_MASK				0x07000000
+#define CS42L43_SPI_SCK_DRV_SHIFT				24
+#define CS42L43_SPI_MOSI_DRV_MASK				0x00E00000
+#define CS42L43_SPI_MOSI_DRV_SHIFT				21
+#define CS42L43_SPI_SSB_DRV_MASK				0x001C0000
+#define CS42L43_SPI_SSB_DRV_SHIFT				18
+#define CS42L43_ASP_DIN_DRV_MASK				0x000001C0
+#define CS42L43_ASP_DIN_DRV_SHIFT				6
+
+/* CS42L43_GPIO_CTRL1 */
+#define CS42L43_GPIO3_POL_MASK					0x00040000
+#define CS42L43_GPIO3_POL_SHIFT					18
+#define CS42L43_GPIO2_POL_MASK					0x00020000
+#define CS42L43_GPIO2_POL_SHIFT					17
+#define CS42L43_GPIO1_POL_MASK					0x00010000
+#define CS42L43_GPIO1_POL_SHIFT					16
+#define CS42L43_GPIO3_LVL_MASK					0x00000400
+#define CS42L43_GPIO3_LVL_SHIFT					10
+#define CS42L43_GPIO2_LVL_MASK					0x00000200
+#define CS42L43_GPIO2_LVL_SHIFT					9
+#define CS42L43_GPIO1_LVL_MASK					0x00000100
+#define CS42L43_GPIO1_LVL_SHIFT					8
+#define CS42L43_GPIO3_DIR_MASK					0x00000004
+#define CS42L43_GPIO3_DIR_SHIFT					2
+#define CS42L43_GPIO2_DIR_MASK					0x00000002
+#define CS42L43_GPIO2_DIR_SHIFT					1
+#define CS42L43_GPIO1_DIR_MASK					0x00000001
+#define CS42L43_GPIO1_DIR_SHIFT					0
+
+/* CS42L43_GPIO_CTRL2 */
+#define CS42L43_GPIO3_DEGLITCH_BYP_MASK				0x00000004
+#define CS42L43_GPIO3_DEGLITCH_BYP_SHIFT			2
+#define CS42L43_GPIO2_DEGLITCH_BYP_MASK				0x00000002
+#define CS42L43_GPIO2_DEGLITCH_BYP_SHIFT			1
+#define CS42L43_GPIO1_DEGLITCH_BYP_MASK				0x00000001
+#define CS42L43_GPIO1_DEGLITCH_BYP_SHIFT			0
+
+/* CS42L43_GPIO_STS */
+#define CS42L43_GPIO3_STS_MASK					0x00000004
+#define CS42L43_GPIO3_STS_SHIFT					2
+#define CS42L43_GPIO2_STS_MASK					0x00000002
+#define CS42L43_GPIO2_STS_SHIFT					1
+#define CS42L43_GPIO1_STS_MASK					0x00000001
+#define CS42L43_GPIO1_STS_SHIFT					0
+
+/* CS42L43_GPIO_FN_SEL */
+#define CS42L43_GPIO3_FN_SEL_MASK				0x00000004
+#define CS42L43_GPIO3_FN_SEL_SHIFT				2
+#define CS42L43_GPIO1_FN_SEL_MASK				0x00000001
+#define CS42L43_GPIO1_FN_SEL_SHIFT				0
+
+/* CS42L43_MCLK_SRC_SEL */
+#define CS42L43_OSC_PLL_MCLK_SEL_MASK				0x00000001
+#define CS42L43_OSC_PLL_MCLK_SEL_SHIFT				0
+
+/* CS42L43_SAMPLE_RATE1..CS42L43_SAMPLE_RATE4 */
+#define CS42L43_SAMPLE_RATE_MASK				0x0000001F
+#define CS42L43_SAMPLE_RATE_SHIFT				0
+
+/* CS42L43_PLL_CONTROL */
+#define CS42L43_PLL_REFCLK_EN_MASK				0x00000008
+#define CS42L43_PLL_REFCLK_EN_SHIFT				3
+#define CS42L43_PLL_REFCLK_DIV_MASK				0x00000006
+#define CS42L43_PLL_REFCLK_DIV_SHIFT				1
+#define CS42L43_PLL_REFCLK_SRC_MASK				0x00000001
+#define CS42L43_PLL_REFCLK_SRC_SHIFT				0
+
+/* CS42L43_FS_SELECT1 */
+#define CS42L43_ASP_RATE_MASK					0x00000003
+#define CS42L43_ASP_RATE_SHIFT					0
+
+/* CS42L43_FS_SELECT2 */
+#define CS42L43_ASRC_DEC_OUT_RATE_MASK				0x000000C0
+#define CS42L43_ASRC_DEC_OUT_RATE_SHIFT				6
+#define CS42L43_ASRC_INT_OUT_RATE_MASK				0x00000030
+#define CS42L43_ASRC_INT_OUT_RATE_SHIFT				4
+#define CS42L43_ASRC_DEC_IN_RATE_MASK				0x0000000C
+#define CS42L43_ASRC_DEC_IN_RATE_SHIFT				2
+#define CS42L43_ASRC_INT_IN_RATE_MASK				0x00000003
+#define CS42L43_ASRC_INT_IN_RATE_SHIFT				0
+
+/* CS42L43_FS_SELECT3 */
+#define CS42L43_HPOUT_RATE_MASK					0x0000C000
+#define CS42L43_HPOUT_RATE_SHIFT				14
+#define CS42L43_EQZ_RATE_MASK					0x00003000
+#define CS42L43_EQZ_RATE_SHIFT					12
+#define CS42L43_DIAGGEN_RATE_MASK				0x00000C00
+#define CS42L43_DIAGGEN_RATE_SHIFT				10
+#define CS42L43_DECIM_CH4_RATE_MASK				0x00000300
+#define CS42L43_DECIM_CH4_RATE_SHIFT				8
+#define CS42L43_DECIM_CH3_RATE_MASK				0x000000C0
+#define CS42L43_DECIM_CH3_RATE_SHIFT				6
+#define CS42L43_DECIM_CH2_RATE_MASK				0x00000030
+#define CS42L43_DECIM_CH2_RATE_SHIFT				4
+#define CS42L43_DECIM_CH1_RATE_MASK				0x0000000C
+#define CS42L43_DECIM_CH1_RATE_SHIFT				2
+#define CS42L43_AMP1_2_RATE_MASK				0x00000003
+#define CS42L43_AMP1_2_RATE_SHIFT				0
+
+/* CS42L43_FS_SELECT4 */
+#define CS42L43_SW_DP7_RATE_MASK				0x00C00000
+#define CS42L43_SW_DP7_RATE_SHIFT				22
+#define CS42L43_SW_DP6_RATE_MASK				0x00300000
+#define CS42L43_SW_DP6_RATE_SHIFT				20
+#define CS42L43_SPDIF_RATE_MASK					0x000C0000
+#define CS42L43_SPDIF_RATE_SHIFT				18
+#define CS42L43_SW_DP5_RATE_MASK				0x00030000
+#define CS42L43_SW_DP5_RATE_SHIFT				16
+#define CS42L43_SW_DP4_RATE_MASK				0x0000C000
+#define CS42L43_SW_DP4_RATE_SHIFT				14
+#define CS42L43_SW_DP3_RATE_MASK				0x00003000
+#define CS42L43_SW_DP3_RATE_SHIFT				12
+#define CS42L43_SW_DP2_RATE_MASK				0x00000C00
+#define CS42L43_SW_DP2_RATE_SHIFT				10
+#define CS42L43_SW_DP1_RATE_MASK				0x00000300
+#define CS42L43_SW_DP1_RATE_SHIFT				8
+#define CS42L43_ISRC2_LOW_RATE_MASK				0x000000C0
+#define CS42L43_ISRC2_LOW_RATE_SHIFT				6
+#define CS42L43_ISRC2_HIGH_RATE_MASK				0x00000030
+#define CS42L43_ISRC2_HIGH_RATE_SHIFT				4
+#define CS42L43_ISRC1_LOW_RATE_MASK				0x0000000C
+#define CS42L43_ISRC1_LOW_RATE_SHIFT				2
+#define CS42L43_ISRC1_HIGH_RATE_MASK				0x00000003
+#define CS42L43_ISRC1_HIGH_RATE_SHIFT				0
+
+/* CS42L43_PDM_CONTROL */
+#define CS42L43_PDM2_CLK_DIV_MASK				0x0000000C
+#define CS42L43_PDM2_CLK_DIV_SHIFT				2
+#define CS42L43_PDM1_CLK_DIV_MASK				0x00000003
+#define CS42L43_PDM1_CLK_DIV_SHIFT				0
+
+/* CS42L43_ASP_CLK_CONFIG1 */
+#define CS42L43_ASP_BCLK_N_MASK					0x03FF0000
+#define CS42L43_ASP_BCLK_N_SHIFT				16
+#define CS42L43_ASP_BCLK_M_MASK					0x000003FF
+#define CS42L43_ASP_BCLK_M_SHIFT				0
+
+/* CS42L43_ASP_CLK_CONFIG2 */
+#define CS42L43_ASP_MASTER_MODE_MASK				0x00000002
+#define CS42L43_ASP_MASTER_MODE_SHIFT				1
+#define CS42L43_ASP_BCLK_INV_MASK				0x00000001
+#define CS42L43_ASP_BCLK_INV_SHIFT				0
+
+/* CS42L43_OSC_DIV_SEL */
+#define CS42L43_OSC_DIV2_EN_MASK				0x00000001
+#define CS42L43_OSC_DIV2_EN_SHIFT				0
+
+/* CS42L43_ADC_B_CTRL1..CS42L43_ADC_B_CTRL1 */
+#define CS42L43_PGA_WIDESWING_MODE_EN_MASK			0x00000080
+#define CS42L43_PGA_WIDESWING_MODE_EN_SHIFT			7
+#define CS42L43_ADC_AIN_SEL_MASK				0x00000010
+#define CS42L43_ADC_AIN_SEL_SHIFT				4
+#define CS42L43_ADC_PGA_GAIN_MASK				0x0000000F
+#define CS42L43_ADC_PGA_GAIN_SHIFT				0
+
+/* CS42L43_DECIM_HPF_WNF_CTRL1..CS42L43_DECIM_HPF_WNF_CTRL4 */
+#define CS42L43_DECIM_WNF_CF_MASK				0x00000070
+#define CS42L43_DECIM_WNF_CF_SHIFT				4
+#define CS42L43_DECIM_WNF_EN_MASK				0x00000008
+#define CS42L43_DECIM_WNF_EN_SHIFT				3
+#define CS42L43_DECIM_HPF_CF_MASK				0x00000006
+#define CS42L43_DECIM_HPF_CF_SHIFT				1
+#define CS42L43_DECIM_HPF_EN_MASK				0x00000001
+#define CS42L43_DECIM_HPF_EN_SHIFT				0
+
+/* CS42L43_DMIC_PDM_CTRL */
+#define CS42L43_PDM2R_INV_MASK					0x00000020
+#define CS42L43_PDM2R_INV_SHIFT					5
+#define CS42L43_PDM2L_INV_MASK					0x00000010
+#define CS42L43_PDM2L_INV_SHIFT					4
+#define CS42L43_PDM1R_INV_MASK					0x00000008
+#define CS42L43_PDM1R_INV_SHIFT					3
+#define CS42L43_PDM1L_INV_MASK					0x00000004
+#define CS42L43_PDM1L_INV_SHIFT					2
+
+/* CS42L43_DECIM_VOL_CTRL_CH1_CH2 */
+#define CS42L43_DECIM2_MUTE_MASK				0x80000000
+#define CS42L43_DECIM2_MUTE_SHIFT				31
+#define CS42L43_DECIM2_VOL_MASK					0x3FC00000
+#define CS42L43_DECIM2_VOL_SHIFT				22
+#define CS42L43_DECIM2_VD_RAMP_MASK				0x00380000
+#define CS42L43_DECIM2_VD_RAMP_SHIFT				19
+#define CS42L43_DECIM2_VI_RAMP_MASK				0x00070000
+#define CS42L43_DECIM2_VI_RAMP_SHIFT				16
+#define CS42L43_DECIM1_MUTE_MASK				0x00008000
+#define CS42L43_DECIM1_MUTE_SHIFT				15
+#define CS42L43_DECIM1_VOL_MASK					0x00003FC0
+#define CS42L43_DECIM1_VOL_SHIFT				6
+#define CS42L43_DECIM1_VD_RAMP_MASK				0x00000038
+#define CS42L43_DECIM1_VD_RAMP_SHIFT				3
+#define CS42L43_DECIM1_VI_RAMP_MASK				0x00000007
+#define CS42L43_DECIM1_VI_RAMP_SHIFT				0
+
+/* CS42L43_DECIM_VOL_CTRL_CH3_CH4 */
+#define CS42L43_DECIM4_MUTE_MASK				0x80000000
+#define CS42L43_DECIM4_MUTE_SHIFT				31
+#define CS42L43_DECIM4_VOL_MASK					0x3FC00000
+#define CS42L43_DECIM4_VOL_SHIFT				22
+#define CS42L43_DECIM4_VD_RAMP_MASK				0x00380000
+#define CS42L43_DECIM4_VD_RAMP_SHIFT				19
+#define CS42L43_DECIM4_VI_RAMP_MASK				0x00070000
+#define CS42L43_DECIM4_VI_RAMP_SHIFT				16
+#define CS42L43_DECIM3_MUTE_MASK				0x00008000
+#define CS42L43_DECIM3_MUTE_SHIFT				15
+#define CS42L43_DECIM3_VOL_MASK					0x00003FC0
+#define CS42L43_DECIM3_VOL_SHIFT				6
+#define CS42L43_DECIM3_VD_RAMP_MASK				0x00000038
+#define CS42L43_DECIM3_VD_RAMP_SHIFT				3
+#define CS42L43_DECIM3_VI_RAMP_MASK				0x00000007
+#define CS42L43_DECIM3_VI_RAMP_SHIFT				0
+
+/* CS42L43_DECIM_VOL_CTRL_UPDATE */
+#define CS42L43_DECIM4_VOL_UPDATE_MASK				0x00000008
+#define CS42L43_DECIM4_VOL_UPDATE_SHIFT				3
+#define CS42L43_DECIM3_VOL_UPDATE_MASK				0x00000004
+#define CS42L43_DECIM3_VOL_UPDATE_SHIFT				2
+#define CS42L43_DECIM2_VOL_UPDATE_MASK				0x00000002
+#define CS42L43_DECIM2_VOL_UPDATE_SHIFT				1
+#define CS42L43_DECIM1_VOL_UPDATE_MASK				0x00000001
+#define CS42L43_DECIM1_VOL_UPDATE_SHIFT				0
+
+/* CS42L43_INTP_VOLUME_CTRL1..CS42L43_INTP_VOLUME_CTRL2 */
+#define CS42L43_AMP1_2_VU_MASK					0x00000200
+#define CS42L43_AMP1_2_VU_SHIFT					9
+#define CS42L43_AMP_MUTE_MASK					0x00000100
+#define CS42L43_AMP_MUTE_SHIFT					8
+#define CS42L43_AMP_VOL_MASK					0x000000FF
+#define CS42L43_AMP_VOL_SHIFT					0
+
+/* CS42L43_AMP1_2_VOL_RAMP */
+#define CS42L43_AMP1_2_VD_RAMP_MASK				0x00000070
+#define CS42L43_AMP1_2_VD_RAMP_SHIFT				4
+#define CS42L43_AMP1_2_VI_RAMP_MASK				0x00000007
+#define CS42L43_AMP1_2_VI_RAMP_SHIFT				0
+
+/* CS42L43_ASP_CTRL */
+#define CS42L43_ASP_FSYNC_MODE_MASK				0x00000004
+#define CS42L43_ASP_FSYNC_MODE_SHIFT				2
+#define CS42L43_ASP_BCLK_EN_MASK				0x00000002
+#define CS42L43_ASP_BCLK_EN_SHIFT				1
+#define CS42L43_ASP_FSYNC_EN_MASK				0x00000001
+#define CS42L43_ASP_FSYNC_EN_SHIFT				0
+
+/* CS42L43_ASP_FSYNC_CTRL1 */
+#define CS42L43_ASP_FSYNC_M_MASK				0x0007FFFF
+#define CS42L43_ASP_FSYNC_M_SHIFT				0
+
+/* CS42L43_ASP_FSYNC_CTRL3 */
+#define CS42L43_ASP_FSYNC_IN_INV_MASK				0x00000002
+#define CS42L43_ASP_FSYNC_IN_INV_SHIFT				1
+#define CS42L43_ASP_FSYNC_OUT_INV_MASK				0x00000001
+#define CS42L43_ASP_FSYNC_OUT_INV_SHIFT				0
+
+/* CS42L43_ASP_FSYNC_CTRL4 */
+#define CS42L43_ASP_NUM_BCLKS_PER_FSYNC_MASK			0x00001FFE
+#define CS42L43_ASP_NUM_BCLKS_PER_FSYNC_SHIFT			1
+
+/* CS42L43_ASP_DATA_CTRL */
+#define CS42L43_ASP_FSYNC_FRAME_START_PHASE_MASK		0x00000008
+#define CS42L43_ASP_FSYNC_FRAME_START_PHASE_SHIFT		3
+#define CS42L43_ASP_FSYNC_FRAME_START_DLY_MASK			0x00000007
+#define CS42L43_ASP_FSYNC_FRAME_START_DLY_SHIFT			0
+
+/* CS42L43_ASP_RX_EN */
+#define CS42L43_ASP_RX_CH6_EN_MASK				0x00000020
+#define CS42L43_ASP_RX_CH6_EN_SHIFT				5
+#define CS42L43_ASP_RX_CH5_EN_MASK				0x00000010
+#define CS42L43_ASP_RX_CH5_EN_SHIFT				4
+#define CS42L43_ASP_RX_CH4_EN_MASK				0x00000008
+#define CS42L43_ASP_RX_CH4_EN_SHIFT				3
+#define CS42L43_ASP_RX_CH3_EN_MASK				0x00000004
+#define CS42L43_ASP_RX_CH3_EN_SHIFT				2
+#define CS42L43_ASP_RX_CH2_EN_MASK				0x00000002
+#define CS42L43_ASP_RX_CH2_EN_SHIFT				1
+#define CS42L43_ASP_RX_CH1_EN_MASK				0x00000001
+#define CS42L43_ASP_RX_CH1_EN_SHIFT				0
+
+/* CS42L43_ASP_TX_EN */
+#define CS42L43_ASP_TX_CH6_EN_MASK				0x00000020
+#define CS42L43_ASP_TX_CH6_EN_SHIFT				5
+#define CS42L43_ASP_TX_CH5_EN_MASK				0x00000010
+#define CS42L43_ASP_TX_CH5_EN_SHIFT				4
+#define CS42L43_ASP_TX_CH4_EN_MASK				0x00000008
+#define CS42L43_ASP_TX_CH4_EN_SHIFT				3
+#define CS42L43_ASP_TX_CH3_EN_MASK				0x00000004
+#define CS42L43_ASP_TX_CH3_EN_SHIFT				2
+#define CS42L43_ASP_TX_CH2_EN_MASK				0x00000002
+#define CS42L43_ASP_TX_CH2_EN_SHIFT				1
+#define CS42L43_ASP_TX_CH1_EN_MASK				0x00000001
+#define CS42L43_ASP_TX_CH1_EN_SHIFT				0
+
+/* CS42L43_ASP_RX_CH1_CTRL..CS42L43_ASP_TX_CH6_CTRL */
+#define CS42L43_ASP_CH_WIDTH_MASK				0x001F0000
+#define CS42L43_ASP_CH_WIDTH_SHIFT				16
+#define CS42L43_ASP_CH_SLOT_MASK				0x00001FFE
+#define CS42L43_ASP_CH_SLOT_SHIFT				1
+#define CS42L43_ASP_CH_SLOT_PHASE_MASK				0x00000001
+#define CS42L43_ASP_CH_SLOT_PHASE_SHIFT				0
+
+/* CS42L43_ASPTX1_INPUT..CS42L43_AMP4MIX_INPUT4 */
+#define CS42L43_MIXER_VOL_MASK					0x00FE0000
+#define CS42L43_MIXER_VOL_SHIFT					17
+#define CS42L43_MIXER_SRC_MASK					0x000001FF
+#define CS42L43_MIXER_SRC_SHIFT					0
+
+/* CS42L43_ASRC_INT_ENABLES */
+#define CS42L43_ASRC_INT4_EN_MASK				0x00000008
+#define CS42L43_ASRC_INT4_EN_SHIFT				3
+#define CS42L43_ASRC_INT3_EN_MASK				0x00000004
+#define CS42L43_ASRC_INT3_EN_SHIFT				2
+#define CS42L43_ASRC_INT2_EN_MASK				0x00000002
+#define CS42L43_ASRC_INT2_EN_SHIFT				1
+#define CS42L43_ASRC_INT1_EN_MASK				0x00000001
+#define CS42L43_ASRC_INT1_EN_SHIFT				0
+
+/* CS42L43_ASRC_DEC_ENABLES */
+#define CS42L43_ASRC_DEC4_EN_MASK				0x00000008
+#define CS42L43_ASRC_DEC4_EN_SHIFT				3
+#define CS42L43_ASRC_DEC3_EN_MASK				0x00000004
+#define CS42L43_ASRC_DEC3_EN_SHIFT				2
+#define CS42L43_ASRC_DEC2_EN_MASK				0x00000002
+#define CS42L43_ASRC_DEC2_EN_SHIFT				1
+#define CS42L43_ASRC_DEC1_EN_MASK				0x00000001
+#define CS42L43_ASRC_DEC1_EN_SHIFT				0
+
+/* CS42L43_PDNCNTL */
+#define CS42L43_RING_SENSE_EN_MASK				0x00000002
+#define CS42L43_RING_SENSE_EN_SHIFT				1
+
+/* CS42L43_RINGSENSE_DEB_CTRL */
+#define CS42L43_RINGSENSE_INV_MASK				0x00000080
+#define CS42L43_RINGSENSE_INV_SHIFT				7
+#define CS42L43_RINGSENSE_PULLUP_PDNB_MASK			0x00000040
+#define CS42L43_RINGSENSE_PULLUP_PDNB_SHIFT			6
+#define CS42L43_RINGSENSE_FALLING_DB_TIME_MASK			0x00000038
+#define CS42L43_RINGSENSE_FALLING_DB_TIME_SHIFT			3
+#define CS42L43_RINGSENSE_RISING_DB_TIME_MASK			0x00000007
+#define CS42L43_RINGSENSE_RISING_DB_TIME_SHIFT			0
+
+/* CS42L43_TIPSENSE_DEB_CTRL */
+#define CS42L43_TIPSENSE_INV_MASK				0x00000080
+#define CS42L43_TIPSENSE_INV_SHIFT				7
+#define CS42L43_TIPSENSE_FALLING_DB_TIME_MASK			0x00000038
+#define CS42L43_TIPSENSE_FALLING_DB_TIME_SHIFT			3
+#define CS42L43_TIPSENSE_RISING_DB_TIME_MASK			0x00000007
+#define CS42L43_TIPSENSE_RISING_DB_TIME_SHIFT			0
+
+/* CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS */
+#define CS42L43_TIPSENSE_UNPLUG_DB_STS_MASK			0x00000008
+#define CS42L43_TIPSENSE_UNPLUG_DB_STS_SHIFT			3
+#define CS42L43_TIPSENSE_PLUG_DB_STS_MASK			0x00000004
+#define CS42L43_TIPSENSE_PLUG_DB_STS_SHIFT			2
+#define CS42L43_RINGSENSE_UNPLUG_DB_STS_MASK			0x00000002
+#define CS42L43_RINGSENSE_UNPLUG_DB_STS_SHIFT			1
+#define CS42L43_RINGSENSE_PLUG_DB_STS_MASK			0x00000001
+#define CS42L43_RINGSENSE_PLUG_DB_STS_SHIFT			0
+
+/* CS42L43_HS2 */
+#define CS42L43_HS_CLAMP_DISABLE_MASK				0x10000000
+#define CS42L43_HS_CLAMP_DISABLE_SHIFT				28
+#define CS42L43_HSBIAS_RAMP_MASK				0x0C000000
+#define CS42L43_HSBIAS_RAMP_SHIFT				26
+#define CS42L43_HSDET_MODE_MASK					0x00018000
+#define CS42L43_HSDET_MODE_SHIFT				15
+#define CS42L43_HSDET_MANUAL_MODE_MASK				0x00006000
+#define CS42L43_HSDET_MANUAL_MODE_SHIFT				13
+#define CS42L43_AUTO_HSDET_TIME_MASK				0x00000700
+#define CS42L43_AUTO_HSDET_TIME_SHIFT				8
+#define CS42L43_AMP3_4_GNDREF_HS3_SEL_MASK			0x00000080
+#define CS42L43_AMP3_4_GNDREF_HS3_SEL_SHIFT			7
+#define CS42L43_AMP3_4_GNDREF_HS4_SEL_MASK			0x00000040
+#define CS42L43_AMP3_4_GNDREF_HS4_SEL_SHIFT			6
+#define CS42L43_HSBIAS_GNDREF_HS3_SEL_MASK			0x00000020
+#define CS42L43_HSBIAS_GNDREF_HS3_SEL_SHIFT			5
+#define CS42L43_HSBIAS_GNDREF_HS4_SEL_MASK			0x00000010
+#define CS42L43_HSBIAS_GNDREF_HS4_SEL_SHIFT			4
+#define CS42L43_HSBIAS_OUT_HS3_SEL_MASK				0x00000008
+#define CS42L43_HSBIAS_OUT_HS3_SEL_SHIFT			3
+#define CS42L43_HSBIAS_OUT_HS4_SEL_MASK				0x00000004
+#define CS42L43_HSBIAS_OUT_HS4_SEL_SHIFT			2
+#define CS42L43_HSGND_HS3_SEL_MASK				0x00000002
+#define CS42L43_HSGND_HS3_SEL_SHIFT				1
+#define CS42L43_HSGND_HS4_SEL_MASK				0x00000001
+#define CS42L43_HSGND_HS4_SEL_SHIFT				0
+
+/* CS42L43_HS_STAT */
+#define CS42L43_HSDET_TYPE_STS_MASK				0x00000007
+#define CS42L43_HSDET_TYPE_STS_SHIFT				0
+
+/* CS42L43_MCU_SW_INTERRUPT */
+#define CS42L43_CONTROL_IND_MASK				0x00000004
+#define CS42L43_CONTROL_IND_SHIFT				2
+#define CS42L43_CONFIGS_IND_MASK				0x00000002
+#define CS42L43_CONFIGS_IND_SHIFT				1
+#define CS42L43_PATCH_IND_MASK					0x00000001
+#define CS42L43_PATCH_IND_SHIFT					0
+
+/* CS42L43_STEREO_MIC_CTRL */
+#define CS42L43_HS2_BIAS_SENSE_EN_MASK				0x00000020
+#define CS42L43_HS2_BIAS_SENSE_EN_SHIFT				5
+#define CS42L43_HS1_BIAS_SENSE_EN_MASK				0x00000010
+#define CS42L43_HS1_BIAS_SENSE_EN_SHIFT				4
+#define CS42L43_HS2_BIAS_EN_MASK				0x00000008
+#define CS42L43_HS2_BIAS_EN_SHIFT				3
+#define CS42L43_HS1_BIAS_EN_MASK				0x00000004
+#define CS42L43_HS1_BIAS_EN_SHIFT				2
+#define CS42L43_JACK_STEREO_CONFIG_MASK				0x00000003
+#define CS42L43_JACK_STEREO_CONFIG_SHIFT			0
+
+/* CS42L43_STEREO_MIC_CLAMP_CTRL */
+#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_MASK		0x00000002
+#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_VAL_SHIFT		1
+#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_MASK			0x00000001
+#define CS42L43_SMIC_HPAMP_CLAMP_DIS_FRC_SHIFT			0
+
+/* CS42L43_BLOCK_EN2 */
+#define CS42L43_SPI_MSTR_EN_MASK				0x00000001
+#define CS42L43_SPI_MSTR_EN_SHIFT				0
+
+/* CS42L43_BLOCK_EN3 */
+#define CS42L43_PDM2_DIN_R_EN_MASK				0x00000020
+#define CS42L43_PDM2_DIN_R_EN_SHIFT				5
+#define CS42L43_PDM2_DIN_L_EN_MASK				0x00000010
+#define CS42L43_PDM2_DIN_L_EN_SHIFT				4
+#define CS42L43_PDM1_DIN_R_EN_MASK				0x00000008
+#define CS42L43_PDM1_DIN_R_EN_SHIFT				3
+#define CS42L43_PDM1_DIN_L_EN_MASK				0x00000004
+#define CS42L43_PDM1_DIN_L_EN_SHIFT				2
+#define CS42L43_ADC2_EN_MASK					0x00000002
+#define CS42L43_ADC2_EN_SHIFT					1
+#define CS42L43_ADC1_EN_MASK					0x00000001
+#define CS42L43_ADC1_EN_SHIFT					0
+
+/* CS42L43_BLOCK_EN4 */
+#define CS42L43_ASRC_DEC_BANK_EN_MASK				0x00000002
+#define CS42L43_ASRC_DEC_BANK_EN_SHIFT				1
+#define CS42L43_ASRC_INT_BANK_EN_MASK				0x00000001
+#define CS42L43_ASRC_INT_BANK_EN_SHIFT				0
+
+/* CS42L43_BLOCK_EN5 */
+#define CS42L43_ISRC2_BANK_EN_MASK				0x00000002
+#define CS42L43_ISRC2_BANK_EN_SHIFT				1
+#define CS42L43_ISRC1_BANK_EN_MASK				0x00000001
+#define CS42L43_ISRC1_BANK_EN_SHIFT				0
+
+/* CS42L43_BLOCK_EN6 */
+#define CS42L43_MIXER_EN_MASK					0x00000001
+#define CS42L43_MIXER_EN_SHIFT					0
+
+/* CS42L43_BLOCK_EN7 */
+#define CS42L43_EQ_EN_MASK					0x00000001
+#define CS42L43_EQ_EN_SHIFT					0
+
+/* CS42L43_BLOCK_EN8 */
+#define CS42L43_HP_EN_MASK					0x00000001
+#define CS42L43_HP_EN_SHIFT					0
+
+/* CS42L43_BLOCK_EN9 */
+#define CS42L43_TONE_EN_MASK					0x00000001
+#define CS42L43_TONE_EN_SHIFT					0
+
+/* CS42L43_BLOCK_EN10 */
+#define CS42L43_AMP2_EN_MASK					0x00000002
+#define CS42L43_AMP2_EN_SHIFT					1
+#define CS42L43_AMP1_EN_MASK					0x00000001
+#define CS42L43_AMP1_EN_SHIFT					0
+
+/* CS42L43_BLOCK_EN11 */
+#define CS42L43_SPDIF_EN_MASK					0x00000001
+#define CS42L43_SPDIF_EN_SHIFT					0
+
+/* CS42L43_TONE_CH1_CTRL..CS42L43_TONE_CH2_CTRL  */
+#define CS42L43_TONE_FREQ_MASK					0x00000070
+#define CS42L43_TONE_FREQ_SHIFT					4
+#define CS42L43_TONE_SEL_MASK					0x0000000F
+#define CS42L43_TONE_SEL_SHIFT					0
+
+/* CS42L43_MIC_DETECT_CONTROL_1 */
+#define CS42L43_BUTTON_DETECT_MODE_MASK				0x00000018
+#define CS42L43_BUTTON_DETECT_MODE_SHIFT			3
+#define CS42L43_HSBIAS_MODE_MASK				0x00000006
+#define CS42L43_HSBIAS_MODE_SHIFT				1
+#define CS42L43_MIC_LVL_DET_DISABLE_MASK			0x00000001
+#define CS42L43_MIC_LVL_DET_DISABLE_SHIFT			0
+
+/* CS42L43_DETECT_STATUS_1 */
+#define CS42L43_HSDET_DC_STS_MASK				0x01FF0000
+#define CS42L43_HSDET_DC_STS_SHIFT				16
+#define CS42L43_JACKDET_STS_MASK				0x00000080
+#define CS42L43_JACKDET_STS_SHIFT				7
+#define CS42L43_HSBIAS_CLAMP_STS_MASK				0x00000040
+#define CS42L43_HSBIAS_CLAMP_STS_SHIFT				6
+
+/* CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL */
+#define CS42L43_JACKDET_MODE_MASK				0xC0000000
+#define CS42L43_JACKDET_MODE_SHIFT				30
+#define CS42L43_JACKDET_INV_MASK				0x20000000
+#define CS42L43_JACKDET_INV_SHIFT				29
+#define CS42L43_JACKDET_DB_TIME_MASK				0x03000000
+#define CS42L43_JACKDET_DB_TIME_SHIFT				24
+#define CS42L43_S0_AUTO_ADCMUTE_DISABLE_MASK			0x00800000
+#define CS42L43_S0_AUTO_ADCMUTE_DISABLE_SHIFT			23
+#define CS42L43_HSBIAS_SENSE_EN_MASK				0x00000080
+#define CS42L43_HSBIAS_SENSE_EN_SHIFT				7
+#define CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK			0x00000040
+#define CS42L43_AUTO_HSBIAS_CLAMP_EN_SHIFT			6
+#define CS42L43_JACKDET_SENSE_EN_MASK				0x00000020
+#define CS42L43_JACKDET_SENSE_EN_SHIFT				5
+#define CS42L43_HSBIAS_SENSE_TRIP_MASK				0x00000007
+#define CS42L43_HSBIAS_SENSE_TRIP_SHIFT				0
+
+/* CS42L43_MIC_DETECT_CONTROL_ANDROID */
+#define CS42L43_HSDET_LVL_COMBWIDTH_MASK			0xC0000000
+#define CS42L43_HSDET_LVL_COMBWIDTH_SHIFT			30
+#define CS42L43_HSDET_LVL2_THRESH_MASK				0x01FF0000
+#define CS42L43_HSDET_LVL2_THRESH_SHIFT				16
+#define CS42L43_HSDET_LVL1_THRESH_MASK				0x000001FF
+#define CS42L43_HSDET_LVL1_THRESH_SHIFT				0
+
+/* CS42L43_ISRC1_CTRL..CS42L43_ISRC2_CTRL */
+#define CS42L43_ISRC_INT2_EN_MASK				0x00000200
+#define CS42L43_ISRC_INT2_EN_SHIFT				9
+#define CS42L43_ISRC_INT1_EN_MASK				0x00000100
+#define CS42L43_ISRC_INT1_EN_SHIFT				8
+#define CS42L43_ISRC_DEC2_EN_MASK				0x00000002
+#define CS42L43_ISRC_DEC2_EN_SHIFT				1
+#define CS42L43_ISRC_DEC1_EN_MASK				0x00000001
+#define CS42L43_ISRC_DEC1_EN_SHIFT				0
+
+/* CS42L43_CTRL_REG */
+#define CS42L43_PLL_MODE_BYPASS_500_MASK			0x00000004
+#define CS42L43_PLL_MODE_BYPASS_500_SHIFT			2
+#define CS42L43_PLL_MODE_BYPASS_1029_MASK			0x00000002
+#define CS42L43_PLL_MODE_BYPASS_1029_SHIFT			1
+#define CS42L43_PLL_EN_MASK					0x00000001
+#define CS42L43_PLL_EN_SHIFT					0
+
+/* CS42L43_FDIV_FRAC */
+#define CS42L43_PLL_DIV_INT_MASK				0xFF000000
+#define CS42L43_PLL_DIV_INT_SHIFT				24
+#define CS42L43_PLL_DIV_FRAC_BYTE2_MASK				0x00FF0000
+#define CS42L43_PLL_DIV_FRAC_BYTE2_SHIFT			16
+#define CS42L43_PLL_DIV_FRAC_BYTE1_MASK				0x0000FF00
+#define CS42L43_PLL_DIV_FRAC_BYTE1_SHIFT			8
+#define CS42L43_PLL_DIV_FRAC_BYTE0_MASK				0x000000FF
+#define CS42L43_PLL_DIV_FRAC_BYTE0_SHIFT			0
+
+/* CS42L43_CAL_RATIO */
+#define CS42L43_PLL_CAL_RATIO_MASK				0x000000FF
+#define CS42L43_PLL_CAL_RATIO_SHIFT				0
+
+/* CS42L43_SPI_CLK_CONFIG1 */
+#define CS42L43_SCLK_DIV_MASK					0x0000000F
+#define CS42L43_SCLK_DIV_SHIFT					0
+
+/* CS42L43_SPI_CONFIG1 */
+#define CS42L43_SPI_SS_IDLE_DUR_MASK				0x0F000000
+#define CS42L43_SPI_SS_IDLE_DUR_SHIFT				24
+#define CS42L43_SPI_SS_DELAY_DUR_MASK				0x000F0000
+#define CS42L43_SPI_SS_DELAY_DUR_SHIFT				16
+#define CS42L43_SPI_THREE_WIRE_MASK				0x00000100
+#define CS42L43_SPI_THREE_WIRE_SHIFT				8
+#define CS42L43_SPI_DPHA_MASK					0x00000040
+#define CS42L43_SPI_DPHA_SHIFT					6
+#define CS42L43_SPI_CPHA_MASK					0x00000020
+#define CS42L43_SPI_CPHA_SHIFT					5
+#define CS42L43_SPI_CPOL_MASK					0x00000010
+#define CS42L43_SPI_CPOL_SHIFT					4
+#define CS42L43_SPI_SS_SEL_MASK					0x00000007
+#define CS42L43_SPI_SS_SEL_SHIFT				0
+
+/* CS42L43_SPI_CONFIG2 */
+#define CS42L43_SPI_SS_FRC_MASK					0x00000001
+#define CS42L43_SPI_SS_FRC_SHIFT				0
+
+/* CS42L43_SPI_CONFIG3 */
+#define CS42L43_SPI_WDT_ENA_MASK				0x00000001
+#define CS42L43_SPI_WDT_ENA_SHIFT				0
+
+/* CS42L43_SPI_CONFIG4 */
+#define CS42L43_SPI_STALL_ENA_MASK				0x00010000
+#define CS42L43_SPI_STALL_ENA_SHIFT				16
+
+/* CS42L43_SPI_STATUS1 */
+#define CS42L43_SPI_ABORT_STS_MASK				0x00000002
+#define CS42L43_SPI_ABORT_STS_SHIFT				1
+#define CS42L43_SPI_DONE_STS_MASK				0x00000001
+#define CS42L43_SPI_DONE_STS_SHIFT				0
+
+/* CS42L43_SPI_STATUS2 */
+#define CS42L43_SPI_RX_DONE_STS_MASK				0x00000010
+#define CS42L43_SPI_RX_DONE_STS_SHIFT				4
+#define CS42L43_SPI_TX_DONE_STS_MASK				0x00000001
+#define CS42L43_SPI_TX_DONE_STS_SHIFT				0
+
+/* CS42L43_TRAN_CONFIG1 */
+#define CS42L43_SPI_START_MASK					0x00000001
+#define CS42L43_SPI_START_SHIFT					0
+
+/* CS42L43_TRAN_CONFIG2 */
+#define CS42L43_SPI_ABORT_MASK					0x00000001
+#define CS42L43_SPI_ABORT_SHIFT					0
+
+/* CS42L43_TRAN_CONFIG3 */
+#define CS42L43_SPI_WORD_SIZE_MASK				0x00070000
+#define CS42L43_SPI_WORD_SIZE_SHIFT				16
+#define CS42L43_SPI_CMD_MASK					0x00000003
+#define CS42L43_SPI_CMD_SHIFT					0
+
+/* CS42L43_TRAN_CONFIG4 */
+#define CS42L43_SPI_TX_LENGTH_MASK				0x0000FFFF
+#define CS42L43_SPI_TX_LENGTH_SHIFT				0
+
+/* CS42L43_TRAN_CONFIG5 */
+#define CS42L43_SPI_RX_LENGTH_MASK				0x0000FFFF
+#define CS42L43_SPI_RX_LENGTH_SHIFT				0
+
+/* CS42L43_TRAN_CONFIG6 */
+#define CS42L43_SPI_TX_BLOCK_LENGTH_MASK			0x0000000F
+#define CS42L43_SPI_TX_BLOCK_LENGTH_SHIFT			0
+
+/* CS42L43_TRAN_CONFIG7 */
+#define CS42L43_SPI_RX_BLOCK_LENGTH_MASK			0x0000000F
+#define CS42L43_SPI_RX_BLOCK_LENGTH_SHIFT			0
+
+/* CS42L43_TRAN_CONFIG8 */
+#define CS42L43_SPI_RX_DONE_MASK				0x00000010
+#define CS42L43_SPI_RX_DONE_SHIFT				4
+#define CS42L43_SPI_TX_DONE_MASK				0x00000001
+#define CS42L43_SPI_TX_DONE_SHIFT				0
+
+/* CS42L43_TRAN_STATUS1 */
+#define CS42L43_SPI_BUSY_STS_MASK				0x00000100
+#define CS42L43_SPI_BUSY_STS_SHIFT				8
+#define CS42L43_SPI_RX_REQUEST_MASK				0x00000010
+#define CS42L43_SPI_RX_REQUEST_SHIFT				4
+#define CS42L43_SPI_TX_REQUEST_MASK				0x00000001
+#define CS42L43_SPI_TX_REQUEST_SHIFT				0
+
+/* CS42L43_TRAN_STATUS2 */
+#define CS42L43_SPI_TX_BYTE_COUNT_MASK				0x0000FFFF
+#define CS42L43_SPI_TX_BYTE_COUNT_SHIFT				0
+
+/* CS42L43_TRAN_STATUS3 */
+#define CS42L43_SPI_RX_BYTE_COUNT_MASK				0x0000FFFF
+#define CS42L43_SPI_RX_BYTE_COUNT_SHIFT				0
+
+/* CS42L43_TX_DATA */
+#define CS42L43_SPI_TX_DATA_MASK				0xFFFFFFFF
+#define CS42L43_SPI_TX_DATA_SHIFT				0
+
+/* CS42L43_RX_DATA */
+#define CS42L43_SPI_RX_DATA_MASK				0xFFFFFFFF
+#define CS42L43_SPI_RX_DATA_SHIFT				0
+
+/* CS42L43_DACCNFG1 */
+#define CS42L43_HP_MSTR_VOL_CTRL_EN_MASK			0x00000008
+#define CS42L43_HP_MSTR_VOL_CTRL_EN_SHIFT			3
+#define CS42L43_AMP4_INV_MASK					0x00000002
+#define CS42L43_AMP4_INV_SHIFT					1
+#define CS42L43_AMP3_INV_MASK					0x00000001
+#define CS42L43_AMP3_INV_SHIFT					0
+
+/* CS42L43_DACCNFG2 */
+#define CS42L43_HP_AUTO_CLAMP_DISABLE_MASK			0x00000002
+#define CS42L43_HP_AUTO_CLAMP_DISABLE_SHIFT			1
+#define CS42L43_HP_HPF_EN_MASK					0x00000001
+#define CS42L43_HP_HPF_EN_SHIFT					0
+
+/* CS42L43_HPPATHVOL */
+#define CS42L43_AMP4_PATH_VOL_MASK				0x01FF0000
+#define CS42L43_AMP4_PATH_VOL_SHIFT				16
+#define CS42L43_AMP3_PATH_VOL_MASK				0x000001FF
+#define CS42L43_AMP3_PATH_VOL_SHIFT				0
+
+/* CS42L43_PGAVOL */
+#define CS42L43_HP_PATH_VOL_RAMP_MASK				0x0003C000
+#define CS42L43_HP_PATH_VOL_RAMP_SHIFT				14
+#define CS42L43_HP_PATH_VOL_ZC_MASK				0x00002000
+#define CS42L43_HP_PATH_VOL_ZC_SHIFT				13
+#define CS42L43_HP_PATH_VOL_SFT_MASK				0x00001000
+#define CS42L43_HP_PATH_VOL_SFT_SHIFT				12
+#define CS42L43_HP_DIG_VOL_RAMP_MASK				0x00000F00
+#define CS42L43_HP_DIG_VOL_RAMP_SHIFT				8
+#define CS42L43_HP_ANA_VOL_RAMP_MASK				0x0000000F
+#define CS42L43_HP_ANA_VOL_RAMP_SHIFT				0
+
+/* CS42L43_LOADDETRESULTS */
+#define CS42L43_AMP3_RES_DET_MASK				0x00000003
+#define CS42L43_AMP3_RES_DET_SHIFT				0
+
+/* CS42L43_LOADDETENA */
+#define CS42L43_HPLOAD_DET_EN_MASK				0x00000001
+#define CS42L43_HPLOAD_DET_EN_SHIFT				0
+
+/* CS42L43_CTRL */
+#define CS42L43_ADPTPWR_MODE_MASK				0x00000007
+#define CS42L43_ADPTPWR_MODE_SHIFT				0
+
+/* CS42L43_COEFF_RD_WR0 */
+#define CS42L43_WRITE_MODE_MASK					0x00000002
+#define CS42L43_WRITE_MODE_SHIFT				1
+
+/* CS42L43_INIT_DONE0 */
+#define CS42L43_INITIALIZE_DONE_MASK				0x00000001
+#define CS42L43_INITIALIZE_DONE_SHIFT				0
+
+/* CS42L43_START_EQZ0 */
+#define CS42L43_START_FILTER_MASK				0x00000001
+#define CS42L43_START_FILTER_SHIFT				0
+
+/* CS42L43_MUTE_EQ_IN0 */
+#define CS42L43_MUTE_EQ_CH2_MASK				0x00000002
+#define CS42L43_MUTE_EQ_CH2_SHIFT				1
+#define CS42L43_MUTE_EQ_CH1_MASK				0x00000001
+#define CS42L43_MUTE_EQ_CH1_SHIFT				0
+
+/* CS42L43_PLL_INT */
+#define CS42L43_PLL_LOST_LOCK_INT_MASK				0x00000002
+#define CS42L43_PLL_LOST_LOCK_INT_SHIFT				1
+#define CS42L43_PLL_READY_INT_MASK				0x00000001
+#define CS42L43_PLL_READY_INT_SHIFT				0
+
+/* CS42L43_SOFT_INT */
+#define CS42L43_CONTROL_APPLIED_INT_MASK			0x00000010
+#define CS42L43_CONTROL_APPLIED_INT_SHIFT			4
+#define CS42L43_CONTROL_WARN_INT_MASK				0x00000008
+#define CS42L43_CONTROL_WARN_INT_SHIFT				3
+#define CS42L43_PATCH_WARN_INT_MASK				0x00000002
+#define CS42L43_PATCH_WARN_INT_SHIFT				1
+#define CS42L43_PATCH_APPLIED_INT_MASK				0x00000001
+#define CS42L43_PATCH_APPLIED_INT_SHIFT				0
+
+/* CS42L43_MSM_INT */
+#define CS42L43_HP_STARTUP_DONE_INT_MASK			0x00000800
+#define CS42L43_HP_STARTUP_DONE_INT_SHIFT			11
+#define CS42L43_HP_SHUTDOWN_DONE_INT_MASK			0x00000400
+#define CS42L43_HP_SHUTDOWN_DONE_INT_SHIFT			10
+#define CS42L43_HSDET_DONE_INT_MASK				0x00000200
+#define CS42L43_HSDET_DONE_INT_SHIFT				9
+#define CS42L43_TIPSENSE_UNPLUG_DB_INT_MASK			0x00000080
+#define CS42L43_TIPSENSE_UNPLUG_DB_INT_SHIFT			7
+#define CS42L43_TIPSENSE_PLUG_DB_INT_MASK			0x00000040
+#define CS42L43_TIPSENSE_PLUG_DB_INT_SHIFT			6
+#define CS42L43_RINGSENSE_UNPLUG_DB_INT_MASK			0x00000020
+#define CS42L43_RINGSENSE_UNPLUG_DB_INT_SHIFT			5
+#define CS42L43_RINGSENSE_PLUG_DB_INT_MASK			0x00000010
+#define CS42L43_RINGSENSE_PLUG_DB_INT_SHIFT			4
+#define CS42L43_TIPSENSE_UNPLUG_PDET_INT_MASK			0x00000008
+#define CS42L43_TIPSENSE_UNPLUG_PDET_INT_SHIFT			3
+#define CS42L43_TIPSENSE_PLUG_PDET_INT_MASK			0x00000004
+#define CS42L43_TIPSENSE_PLUG_PDET_INT_SHIFT			2
+#define CS42L43_RINGSENSE_UNPLUG_PDET_INT_MASK			0x00000002
+#define CS42L43_RINGSENSE_UNPLUG_PDET_INT_SHIFT			1
+#define CS42L43_RINGSENSE_PLUG_PDET_INT_MASK			0x00000001
+#define CS42L43_RINGSENSE_PLUG_PDET_INT_SHIFT			0
+
+/* CS42L43_ACC_DET_INT */
+#define CS42L43_HS2_BIAS_SENSE_INT_MASK				0x00000800
+#define CS42L43_HS2_BIAS_SENSE_INT_SHIFT			11
+#define CS42L43_HS1_BIAS_SENSE_INT_MASK				0x00000400
+#define CS42L43_HS1_BIAS_SENSE_INT_SHIFT			10
+#define CS42L43_DC_DETECT1_FALSE_INT_MASK			0x00000080
+#define CS42L43_DC_DETECT1_FALSE_INT_SHIFT			7
+#define CS42L43_DC_DETECT1_TRUE_INT_MASK			0x00000040
+#define CS42L43_DC_DETECT1_TRUE_INT_SHIFT			6
+#define CS42L43_HSBIAS_CLAMPED_INT_MASK				0x00000008
+#define CS42L43_HSBIAS_CLAMPED_INT_SHIFT			3
+#define CS42L43_HS3_4_BIAS_SENSE_INT_MASK			0x00000001
+#define CS42L43_HS3_4_BIAS_SENSE_INT_SHIFT			0
+
+/* CS42L43_SPI_MSTR_INT */
+#define CS42L43_IRQ_SPI_STALLING_INT_MASK			0x00000004
+#define CS42L43_IRQ_SPI_STALLING_INT_SHIFT			2
+#define CS42L43_IRQ_SPI_STS_INT_MASK				0x00000002
+#define CS42L43_IRQ_SPI_STS_INT_SHIFT				1
+#define CS42L43_IRQ_SPI_BLOCK_INT_MASK				0x00000001
+#define CS42L43_IRQ_SPI_BLOCK_INT_SHIFT				0
+
+/* CS42L43_SW_TO_SPI_BRIDGE_INT */
+#define CS42L43_SW2SPI_BUF_OVF_UDF_INT_MASK			0x00000001
+#define CS42L43_SW2SPI_BUF_OVF_UDF_INT_SHIFT			0
+
+/* CS42L43_CLASS_D_AMP_INT */
+#define CS42L43_AMP2_CLK_STOP_FAULT_INT_MASK			0x00002000
+#define CS42L43_AMP2_CLK_STOP_FAULT_INT_SHIFT			13
+#define CS42L43_AMP1_CLK_STOP_FAULT_INT_MASK			0x00001000
+#define CS42L43_AMP1_CLK_STOP_FAULT_INT_SHIFT			12
+#define CS42L43_AMP2_VDDSPK_FAULT_INT_MASK			0x00000800
+#define CS42L43_AMP2_VDDSPK_FAULT_INT_SHIFT			11
+#define CS42L43_AMP1_VDDSPK_FAULT_INT_MASK			0x00000400
+#define CS42L43_AMP1_VDDSPK_FAULT_INT_SHIFT			10
+#define CS42L43_AMP2_SHUTDOWN_DONE_INT_MASK			0x00000200
+#define CS42L43_AMP2_SHUTDOWN_DONE_INT_SHIFT			9
+#define CS42L43_AMP1_SHUTDOWN_DONE_INT_MASK			0x00000100
+#define CS42L43_AMP1_SHUTDOWN_DONE_INT_SHIFT			8
+#define CS42L43_AMP2_STARTUP_DONE_INT_MASK			0x00000080
+#define CS42L43_AMP2_STARTUP_DONE_INT_SHIFT			7
+#define CS42L43_AMP1_STARTUP_DONE_INT_MASK			0x00000040
+#define CS42L43_AMP1_STARTUP_DONE_INT_SHIFT			6
+#define CS42L43_AMP2_THERM_SHDN_INT_MASK			0x00000020
+#define CS42L43_AMP2_THERM_SHDN_INT_SHIFT			5
+#define CS42L43_AMP1_THERM_SHDN_INT_MASK			0x00000010
+#define CS42L43_AMP1_THERM_SHDN_INT_SHIFT			4
+#define CS42L43_AMP2_THERM_WARN_INT_MASK			0x00000008
+#define CS42L43_AMP2_THERM_WARN_INT_SHIFT			3
+#define CS42L43_AMP1_THERM_WARN_INT_MASK			0x00000004
+#define CS42L43_AMP1_THERM_WARN_INT_SHIFT			2
+#define CS42L43_AMP2_SCDET_INT_MASK				0x00000002
+#define CS42L43_AMP2_SCDET_INT_SHIFT				1
+#define CS42L43_AMP1_SCDET_INT_MASK				0x00000001
+#define CS42L43_AMP1_SCDET_INT_SHIFT				0
+
+/* CS42L43_GPIO_INT */
+#define CS42L43_GPIO3_FALL_INT_MASK				0x00000020
+#define CS42L43_GPIO3_FALL_INT_SHIFT				5
+#define CS42L43_GPIO3_RISE_INT_MASK				0x00000010
+#define CS42L43_GPIO3_RISE_INT_SHIFT				4
+#define CS42L43_GPIO2_FALL_INT_MASK				0x00000008
+#define CS42L43_GPIO2_FALL_INT_SHIFT				3
+#define CS42L43_GPIO2_RISE_INT_MASK				0x00000004
+#define CS42L43_GPIO2_RISE_INT_SHIFT				2
+#define CS42L43_GPIO1_FALL_INT_MASK				0x00000002
+#define CS42L43_GPIO1_FALL_INT_SHIFT				1
+#define CS42L43_GPIO1_RISE_INT_MASK				0x00000001
+#define CS42L43_GPIO1_RISE_INT_SHIFT				0
+
+/* CS42L43_HPOUT_INT */
+#define CS42L43_HP_ILIMIT_INT_MASK				0x00000002
+#define CS42L43_HP_ILIMIT_INT_SHIFT				1
+#define CS42L43_HP_LOADDET_DONE_INT_MASK			0x00000001
+#define CS42L43_HP_LOADDET_DONE_INT_SHIFT			0
+
+/* CS42L43_BOOT_CONTROL */
+#define CS42L43_LOCK_HW_STS_MASK				0x00000002
+#define CS42L43_LOCK_HW_STS_SHIFT				1
+
+/* CS42L43_BLOCK_EN */
+#define CS42L43_MCU_EN_MASK					0x00000001
+#define CS42L43_MCU_EN_SHIFT					0
+
+/* CS42L43_SHUTTER_CONTROL */
+#define CS42L43_STATUS_SPK_SHUTTER_MUTE_MASK			0x00008000
+#define CS42L43_STATUS_SPK_SHUTTER_MUTE_SHIFT			15
+#define CS42L43_SPK_SHUTTER_CFG_MASK				0x00000F00
+#define CS42L43_SPK_SHUTTER_CFG_SHIFT				8
+#define CS42L43_STATUS_MIC_SHUTTER_MUTE_MASK			0x00000080
+#define CS42L43_STATUS_MIC_SHUTTER_MUTE_SHIFT			7
+#define CS42L43_MIC_SHUTTER_CFG_MASK				0x0000000F
+#define CS42L43_MIC_SHUTTER_CFG_SHIFT				0
+
+/* CS42L43_MCU_SW_REV */
+#define CS42L43_BIOS_SUBMINOR_REV_MASK				0xFF000000
+#define CS42L43_BIOS_SUBMINOR_REV_SHIFT				24
+#define CS42L43_BIOS_MINOR_REV_MASK				0x00F00000
+#define CS42L43_BIOS_MINOR_REV_SHIFT				20
+#define CS42L43_BIOS_MAJOR_REV_MASK				0x000F0000
+#define CS42L43_BIOS_MAJOR_REV_SHIFT				16
+#define CS42L43_FW_SUBMINOR_REV_MASK				0x0000FF00
+#define CS42L43_FW_SUBMINOR_REV_SHIFT				8
+#define CS42L43_FW_MINOR_REV_MASK				0x000000F0
+#define CS42L43_FW_MINOR_REV_SHIFT				4
+#define CS42L43_FW_MAJOR_REV_MASK				0x0000000F
+#define CS42L43_FW_MAJOR_REV_SHIFT				0
+
+/* CS42L43_NEED_CONFIGS */
+#define CS42L43_FW_PATCH_NEED_CFG_MASK				0x80000000
+#define CS42L43_FW_PATCH_NEED_CFG_SHIFT				31
+
+/* CS42L43_FW_MISSION_CTRL_MM_CTRL_SELECTION */
+#define CS42L43_FW_MM_CTRL_MCU_SEL_MASK				0x00000001
+#define CS42L43_FW_MM_CTRL_MCU_SEL_SHIFT			0
+
+/* CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_REG */
+#define CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_DISABLE_VAL		0xF05AA50F
+
+#endif /* CS42L43_CORE_REGS_H */
diff --git a/include/linux/mfd/cs42l43.h b/include/linux/mfd/cs42l43.h
new file mode 100644
index 000000000000..cf8263aab41b
--- /dev/null
+++ b/include/linux/mfd/cs42l43.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CS42L43 core driver external data
+ *
+ * Copyright (C) 2022-2023 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ */
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/workqueue.h>
+
+#ifndef CS42L43_CORE_EXT_H
+#define CS42L43_CORE_EXT_H
+
+#define CS42L43_N_SUPPLIES		3
+
+enum cs42l43_irq_numbers {
+	CS42L43_PLL_LOST_LOCK,
+	CS42L43_PLL_READY,
+
+	CS42L43_HP_STARTUP_DONE,
+	CS42L43_HP_SHUTDOWN_DONE,
+	CS42L43_HSDET_DONE,
+	CS42L43_TIPSENSE_UNPLUG_DB,
+	CS42L43_TIPSENSE_PLUG_DB,
+	CS42L43_RINGSENSE_UNPLUG_DB,
+	CS42L43_RINGSENSE_PLUG_DB,
+	CS42L43_TIPSENSE_UNPLUG_PDET,
+	CS42L43_TIPSENSE_PLUG_PDET,
+	CS42L43_RINGSENSE_UNPLUG_PDET,
+	CS42L43_RINGSENSE_PLUG_PDET,
+
+	CS42L43_HS2_BIAS_SENSE,
+	CS42L43_HS1_BIAS_SENSE,
+	CS42L43_DC_DETECT1_FALSE,
+	CS42L43_DC_DETECT1_TRUE,
+	CS42L43_HSBIAS_CLAMPED,
+	CS42L43_HS3_4_BIAS_SENSE,
+
+	CS42L43_AMP2_CLK_STOP_FAULT,
+	CS42L43_AMP1_CLK_STOP_FAULT,
+	CS42L43_AMP2_VDDSPK_FAULT,
+	CS42L43_AMP1_VDDSPK_FAULT,
+	CS42L43_AMP2_SHUTDOWN_DONE,
+	CS42L43_AMP1_SHUTDOWN_DONE,
+	CS42L43_AMP2_STARTUP_DONE,
+	CS42L43_AMP1_STARTUP_DONE,
+	CS42L43_AMP2_THERM_SHDN,
+	CS42L43_AMP1_THERM_SHDN,
+	CS42L43_AMP2_THERM_WARN,
+	CS42L43_AMP1_THERM_WARN,
+	CS42L43_AMP2_SCDET,
+	CS42L43_AMP1_SCDET,
+
+	CS42L43_GPIO3_FALL,
+	CS42L43_GPIO3_RISE,
+	CS42L43_GPIO2_FALL,
+	CS42L43_GPIO2_RISE,
+	CS42L43_GPIO1_FALL,
+	CS42L43_GPIO1_RISE,
+
+	CS42L43_HP_ILIMIT,
+	CS42L43_HP_LOADDET_DONE,
+};
+
+struct cs42l43 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct sdw_slave *sdw;
+
+	struct regulator *vdd_p;
+	struct regulator *vdd_d;
+	struct regulator_bulk_data core_supplies[CS42L43_N_SUPPLIES];
+
+	struct gpio_desc *reset;
+
+	int irq;
+	struct regmap_irq_chip irq_chip;
+	struct regmap_irq_chip_data *irq_data;
+
+	struct work_struct boot_work;
+	struct completion device_attach;
+	struct completion device_detach;
+	struct completion firmware_download;
+	int firmware_error;
+
+	unsigned int sdw_freq;
+	/* Lock to gate control of the PLL and its sources. */
+	struct mutex pll_lock;
+
+	bool sdw_pll_active;
+	bool attached;
+	bool hw_lock;
+};
+
+#endif /* CS42L43_CORE_EXT_H */
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
index 821a19135bb6..29e06905bc1f 100644
--- a/include/linux/soc/qcom/geni-se.h
+++ b/include/linux/soc/qcom/geni-se.h
@@ -35,6 +35,7 @@ enum geni_se_protocol_type {
 	GENI_SE_UART,
 	GENI_SE_I2C,
 	GENI_SE_I3C,
+	GENI_SE_SPI_SLAVE,
 };
 
 struct geni_wrapper;
@@ -73,12 +74,14 @@ struct geni_se {
 
 /* Common SE registers */
 #define GENI_FORCE_DEFAULT_REG		0x20
+#define GENI_OUTPUT_CTRL		0x24
 #define SE_GENI_STATUS			0x40
 #define GENI_SER_M_CLK_CFG		0x48
 #define GENI_SER_S_CLK_CFG		0x4c
 #define GENI_IF_DISABLE_RO		0x64
 #define GENI_FW_REVISION_RO		0x68
 #define SE_GENI_CLK_SEL			0x7c
+#define SE_GENI_CFG_SEQ_START		0x84
 #define SE_GENI_DMA_MODE_EN		0x258
 #define SE_GENI_M_CMD0			0x600
 #define SE_GENI_M_CMD_CTRL_REG		0x604
@@ -111,6 +114,9 @@ struct geni_se {
 /* GENI_FORCE_DEFAULT_REG fields */
 #define FORCE_DEFAULT	BIT(0)
 
+/* GENI_OUTPUT_CTRL fields */
+#define GENI_IO_MUX_0_EN		BIT(0)
+
 /* GENI_STATUS fields */
 #define M_GENI_CMD_ACTIVE		BIT(0)
 #define S_GENI_CMD_ACTIVE		BIT(12)
@@ -130,6 +136,9 @@ struct geni_se {
 /* GENI_CLK_SEL fields */
 #define CLK_SEL_MSK			GENMASK(2, 0)
 
+/* SE_GENI_CFG_SEQ_START fields */
+#define START_TRIGGER			BIT(0)
+
 /* SE_GENI_DMA_MODE_EN */
 #define GENI_DMA_MODE_EN		BIT(0)
 
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index f523ceabd059..8923387a7405 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -6,6 +6,8 @@
 
 #include <linux/bug.h>
 #include <linux/lockdep_types.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/mod_devicetable.h>
 #include <linux/bitfield.h>
 
@@ -370,6 +372,7 @@ struct sdw_dpn_prop {
  * @clock_reg_supported: the Peripheral implements the clock base and scale
  * registers introduced with the SoundWire 1.2 specification. SDCA devices
  * do not need to set this boolean property as the registers are required.
+ * @use_domain_irq: call actual IRQ handler on slave, as well as callback
  */
 struct sdw_slave_prop {
 	u32 mipi_revision;
@@ -394,6 +397,7 @@ struct sdw_slave_prop {
 	u8 scp_int1_mask;
 	u32 quirks;
 	bool clock_reg_supported;
+	bool use_domain_irq;
 };
 
 #define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY	BIT(0)
@@ -641,6 +645,7 @@ struct sdw_slave_ops {
  * struct sdw_slave - SoundWire Slave
  * @id: MIPI device ID
  * @dev: Linux device
+ * @irq: IRQ number
  * @status: Status reported by the Slave
  * @bus: Bus handle
  * @prop: Slave properties
@@ -670,6 +675,7 @@ struct sdw_slave_ops {
 struct sdw_slave {
 	struct sdw_slave_id id;
 	struct device dev;
+	int irq;
 	enum sdw_slave_status status;
 	struct sdw_bus *bus;
 	struct sdw_slave_prop prop;
@@ -885,6 +891,7 @@ struct sdw_master_ops {
  * is used to compute and program bus bandwidth, clock, frame shape,
  * transport and port parameters
  * @debugfs: Bus debugfs
+ * @domain: IRQ domain
  * @defer_msg: Defer message
  * @clk_stop_timeout: Clock stop timeout computed
  * @bank_switch_timeout: Bank switch timeout computed
@@ -920,6 +927,8 @@ struct sdw_bus {
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
 #endif
+	struct irq_chip irq_chip;
+	struct irq_domain *domain;
 	struct sdw_defer defer_msg;
 	unsigned int clk_stop_timeout;
 	u32 bank_switch_timeout;
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index 4658e7801b42..0916cb9bcb0a 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -19,7 +19,7 @@ struct pxa2xx_spi_controller {
 	u16 num_chipselect;
 	u8 enable_dma;
 	u8 dma_burst_size;
-	bool is_slave;
+	bool is_target;
 
 	/* DMA engine specific config */
 	bool (*dma_filter)(struct dma_chan *chan, void *param);
@@ -31,7 +31,7 @@ struct pxa2xx_spi_controller {
 };
 
 /*
- * The controller specific data for SPI slave devices
+ * The controller specific data for SPI target devices
  * (resides in spi_board_info.controller_data),
  * copied to spi_device.platform_data ... mostly for
  * DMA tuning.
diff --git a/include/linux/spi/sh_msiof.h b/include/linux/spi/sh_msiof.h
index dc2a0cbd210d..f950d280461b 100644
--- a/include/linux/spi/sh_msiof.h
+++ b/include/linux/spi/sh_msiof.h
@@ -3,8 +3,8 @@
 #define __SPI_SH_MSIOF_H__
 
 enum {
-	MSIOF_SPI_MASTER,
-	MSIOF_SPI_SLAVE,
+	MSIOF_SPI_HOST,
+	MSIOF_SPI_TARGET,
 };
 
 struct sh_msiof_spi_info {
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 32c94eae8926..7f8b478fdeb3 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -6,18 +6,19 @@
 #ifndef __LINUX_SPI_H
 #define __LINUX_SPI_H
 
+#include <linux/acpi.h>
 #include <linux/bits.h>
+#include <linux/completion.h>
 #include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kthread.h>
-#include <linux/completion.h>
+#include <linux/mod_devicetable.h>
+#include <linux/overflow.h>
 #include <linux/scatterlist.h>
-#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+#include <linux/u64_stats_sync.h>
 
 #include <uapi/linux/spi/spi.h>
-#include <linux/acpi.h>
-#include <linux/u64_stats_sync.h>
 
 struct dma_chan;
 struct software_node;
@@ -36,7 +37,7 @@ extern struct bus_type spi_bus_type;
 
 /**
  * struct spi_statistics - statistics for spi transfers
- * @syncp:         seqcount to protect members in this struct for per-cpu udate
+ * @syncp:         seqcount to protect members in this struct for per-cpu update
  *                 on 32-bit systems
  *
  * @messages:      number of spi-messages handled
@@ -55,7 +56,7 @@ extern struct bus_type spi_bus_type;
  * @bytes_rx:      number of bytes received from device
  *
  * @transfer_bytes_histo:
- *                 transfer bytes histogramm
+ *                 transfer bytes histogram
  *
  * @transfers_split_maxsize:
  *                 number of transfers that have been split because of
@@ -156,7 +157,7 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  *	the device will bind to the named driver and only the named driver.
  *	Do not set directly, because core frees it; use driver_set_override() to
  *	set or clear it.
- * @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when
+ * @cs_gpiod: GPIO descriptor of the chipselect line (optional, NULL when
  *	not using a GPIO line)
  * @word_delay: delay to be inserted between consecutive
  *	words of a transfer
@@ -212,7 +213,7 @@ struct spi_device {
 	void			*controller_data;
 	char			modalias[SPI_NAME_SIZE];
 	const char		*driver_override;
-	struct gpio_desc	*cs_gpiod;	/* Chip select gpio desc */
+	struct gpio_desc	*cs_gpiod;	/* Chip select GPIO descriptor */
 	struct spi_delay	word_delay; /* Inter-word delay */
 	/* CS delays */
 	struct spi_delay	cs_setup;
@@ -223,7 +224,7 @@ struct spi_device {
 	struct spi_statistics __percpu	*pcpu_statistics;
 
 	/*
-	 * likely need more hooks for more protocol options affecting how
+	 * Likely need more hooks for more protocol options affecting how
 	 * the controller talks to each chip, like:
 	 *  - memory packing (12 bit samples into low bits, others zeroed)
 	 *  - priority
@@ -299,11 +300,11 @@ static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_d
 /**
  * struct spi_driver - Host side "protocol" driver
  * @id_table: List of SPI devices supported by this driver
- * @probe: Binds this driver to the spi device.  Drivers can verify
+ * @probe: Binds this driver to the SPI device.  Drivers can verify
  *	that the device is actually present, and may need to configure
  *	characteristics (such as bits_per_word) which weren't needed for
  *	the initial configuration done during system setup.
- * @remove: Unbinds this driver from the spi device
+ * @remove: Unbinds this driver from the SPI device
  * @shutdown: Standard shutdown callback used during system state
  *	transitions such as powerdown/halt and kexec
  * @driver: SPI device drivers should initialize the name and owner
@@ -415,7 +416,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @queued: whether this controller is providing an internal message queue
  * @kworker: pointer to thread struct for message pump
  * @pump_messages: work struct for scheduling work to the message pump
- * @queue_lock: spinlock to syncronise access to message queue
+ * @queue_lock: spinlock to synchronise access to message queue
  * @queue: message queue
  * @cur_msg: the currently in-flight message
  * @cur_msg_completion: a completion for the current in-flight message
@@ -473,7 +474,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
  * @target_abort: abort the ongoing transfer request on an SPI target controller
- * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS
+ * @cs_gpiods: Array of GPIO descriptors to use as chip select lines; one per CS
  *	number. Any individual value may be NULL for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
  * @use_gpio_descriptors: Turns on the code in the SPI core to parse and grab
@@ -500,7 +501,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  *	If the driver does not set this, the SPI core takes the snapshot as
  *	close to the driver hand-over as possible.
  * @irq_flags: Interrupt enable state during PTP system timestamping
- * @fallback: fallback to pio if dma transfer return failure with
+ * @fallback: fallback to PIO if DMA transfer return failure with
  *	SPI_TRANS_FAIL_NO_START.
  * @queue_empty: signal green light for opportunistically skipping the queue
  *	for spi_sync transfers.
@@ -522,15 +523,17 @@ struct spi_controller {
 
 	struct list_head list;
 
-	/* Other than negative (== assign one dynamically), bus_num is fully
-	 * board-specific.  usually that simplifies to being SOC-specific.
-	 * example:  one SOC has three SPI controllers, numbered 0..2,
-	 * and one board's schematics might show it using SPI-2.  software
+	/*
+	 * Other than negative (== assign one dynamically), bus_num is fully
+	 * board-specific. Usually that simplifies to being SoC-specific.
+	 * example: one SoC has three SPI controllers, numbered 0..2,
+	 * and one board's schematics might show it using SPI-2. Software
 	 * would normally use bus_num=2 for that controller.
 	 */
 	s16			bus_num;
 
-	/* chipselects will be integral to many controllers; some others
+	/*
+	 * Chipselects will be integral to many controllers; some others
 	 * might use board-specific GPIOs.
 	 */
 	u16			num_chipselect;
@@ -562,8 +565,7 @@ struct spi_controller {
 #define SPI_CONTROLLER_NO_TX		BIT(2)	/* Can't do buffer write */
 #define SPI_CONTROLLER_MUST_RX		BIT(3)	/* Requires rx */
 #define SPI_CONTROLLER_MUST_TX		BIT(4)	/* Requires tx */
-
-#define SPI_MASTER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
+#define SPI_CONTROLLER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
 
 	/* Flag indicating if the allocation of this struct is devres-managed */
 	bool			devm_allocated;
@@ -576,8 +578,8 @@ struct spi_controller {
 	};
 
 	/*
-	 * on some hardware transfer / message size may be constrained
-	 * the limit may depend on device transfer settings
+	 * On some hardware transfer / message size may be constrained
+	 * the limit may depend on device transfer settings.
 	 */
 	size_t (*max_transfer_size)(struct spi_device *spi);
 	size_t (*max_message_size)(struct spi_device *spi);
@@ -595,7 +597,8 @@ struct spi_controller {
 	/* Flag indicating that the SPI bus is locked for exclusive use */
 	bool			bus_lock_flag;
 
-	/* Setup mode and clock, etc (spi driver may call many times).
+	/*
+	 * Setup mode and clock, etc (SPI driver may call many times).
 	 *
 	 * IMPORTANT:  this may be called when transfers to another
 	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
@@ -613,18 +616,19 @@ struct spi_controller {
 	 */
 	int (*set_cs_timing)(struct spi_device *spi);
 
-	/* Bidirectional bulk transfers
+	/*
+	 * Bidirectional bulk transfers
 	 *
 	 * + The transfer() method may not sleep; its main role is
 	 *   just to add the message to the queue.
 	 * + For now there's no remove-from-queue operation, or
 	 *   any other request management
-	 * + To a given spi_device, message queueing is pure fifo
+	 * + To a given spi_device, message queueing is pure FIFO
 	 *
 	 * + The controller's main job is to process its message queue,
 	 *   selecting a chip (for masters), then transferring data
 	 * + If there are multiple spi_device children, the i/o queue
-	 *   arbitration algorithm is unspecified (round robin, fifo,
+	 *   arbitration algorithm is unspecified (round robin, FIFO,
 	 *   priority, reservations, preemption, etc)
 	 *
 	 * + Chipselect stays active during the entire message
@@ -705,7 +709,7 @@ struct spi_controller {
 	const struct spi_controller_mem_ops *mem_ops;
 	const struct spi_controller_mem_caps *mem_caps;
 
-	/* gpio chip select */
+	/* GPIO chip select */
 	struct gpio_desc	**cs_gpiods;
 	bool			use_gpio_descriptors;
 	s8			unused_native_cs;
@@ -789,7 +793,7 @@ void spi_take_timestamp_post(struct spi_controller *ctlr,
 			     struct spi_transfer *xfer,
 			     size_t progress, bool irqs_off);
 
-/* The spi driver core manages memory for the spi_controller classdev */
+/* The SPI driver core manages memory for the spi_controller classdev */
 extern struct spi_controller *__spi_alloc_controller(struct device *host,
 						unsigned int size, bool slave);
 
@@ -878,13 +882,13 @@ typedef void (*spi_res_release_t)(struct spi_controller *ctlr,
 				  void *res);
 
 /**
- * struct spi_res - spi resource management structure
+ * struct spi_res - SPI resource management structure
  * @entry:   list entry
  * @release: release code called prior to freeing this resource
  * @data:    extra data allocated for the specific use-case
  *
- * this is based on ideas from devres, but focused on life-cycle
- * management during spi_message processing
+ * This is based on ideas from devres, but focused on life-cycle
+ * management during spi_message processing.
  */
 struct spi_res {
 	struct list_head        entry;
@@ -902,7 +906,7 @@ struct spi_res {
  *
  * The spi_messages themselves consist of a series of read+write transfer
  * segments.  Those segments always read the same number of bits as they
- * write; but one or the other is easily ignored by passing a null buffer
+ * write; but one or the other is easily ignored by passing a NULL buffer
  * pointer.  (This is unlike most types of I/O API, because SPI hardware
  * is full duplex.)
  *
@@ -913,8 +917,8 @@ struct spi_res {
 
 /**
  * struct spi_transfer - a read/write buffer pair
- * @tx_buf: data to be written (dma-safe memory), or NULL
- * @rx_buf: data to be read (dma-safe memory), or NULL
+ * @tx_buf: data to be written (DMA-safe memory), or NULL
+ * @rx_buf: data to be read (DMA-safe memory), or NULL
  * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
  * @tx_nbits: number of bits used for writing. If 0 the default
@@ -937,7 +941,7 @@ struct spi_res {
  * @word_delay: inter word delay to be introduced after each word size
  *	(set by bits_per_word) transmission.
  * @effective_speed_hz: the effective SCK-speed that was used to
- *      transfer this transfer. Set to 0 if the spi bus driver does
+ *      transfer this transfer. Set to 0 if the SPI bus driver does
  *      not support it.
  * @transfer_list: transfers are sequenced through @spi_message.transfers
  * @tx_sg: Scatterlist for transmit, currently not for client use
@@ -966,16 +970,16 @@ struct spi_res {
  *	transmitting the "pre" word, and the "post" timestamp after receiving
  *	transmit confirmation from the controller for the "post" word.
  * @timestamped: true if the transfer has been timestamped
- * @error: Error status logged by spi controller driver.
+ * @error: Error status logged by SPI controller driver.
  *
  * SPI transfers always write the same number of bytes as they read.
  * Protocol drivers should always provide @rx_buf and/or @tx_buf.
  * In some cases, they may also want to provide DMA addresses for
  * the data being transferred; that may reduce overhead, when the
- * underlying driver uses dma.
+ * underlying driver uses DMA.
  *
- * If the transmit buffer is null, zeroes will be shifted out
- * while filling @rx_buf.  If the receive buffer is null, the data
+ * If the transmit buffer is NULL, zeroes will be shifted out
+ * while filling @rx_buf.  If the receive buffer is NULL, the data
  * shifted in will be discarded.  Only "len" bytes shift out (or in).
  * It's an error to try to shift out a partial word.  (For example, by
  * shifting out three bytes with word size of sixteen or twenty bits;
@@ -1009,7 +1013,7 @@ struct spi_res {
  * Some devices need protocol transactions to be built from a series of
  * spi_message submissions, where the content of one message is determined
  * by the results of previous messages and where the whole transaction
- * ends when the chipselect goes intactive.
+ * ends when the chipselect goes inactive.
  *
  * When SPI can transfer in 1x,2x or 4x. It can get this transfer information
  * from device through @tx_nbits and @rx_nbits. In Bi-direction, these
@@ -1023,10 +1027,11 @@ struct spi_res {
  * and its transfers, ignore them until its completion callback.
  */
 struct spi_transfer {
-	/* It's ok if tx_buf == rx_buf (right?)
-	 * for MicroWire, one buffer must be null
-	 * buffers must work with dma_*map_single() calls, unless
-	 *   spi_message.is_dma_mapped reports a pre-existing mapping
+	/*
+	 * It's okay if tx_buf == rx_buf (right?).
+	 * For MicroWire, one buffer must be NULL.
+	 * Buffers must work with dma_*map_single() calls, unless
+	 * spi_message.is_dma_mapped reports a pre-existing mapping.
 	 */
 	const void	*tx_buf;
 	void		*rx_buf;
@@ -1046,9 +1051,9 @@ struct spi_transfer {
 	unsigned	tx_nbits:3;
 	unsigned	rx_nbits:3;
 	unsigned	timestamped:1;
-#define	SPI_NBITS_SINGLE	0x01 /* 1bit transfer */
-#define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
-#define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
+#define	SPI_NBITS_SINGLE	0x01 /* 1-bit transfer */
+#define	SPI_NBITS_DUAL		0x02 /* 2-bit transfer */
+#define	SPI_NBITS_QUAD		0x04 /* 4-bit transfer */
 	u8		bits_per_word;
 	struct spi_delay	delay;
 	struct spi_delay	cs_change_delay;
@@ -1069,7 +1074,7 @@ struct spi_transfer {
  * struct spi_message - one multi-segment SPI transaction
  * @transfers: list of transfer segments in this transaction
  * @spi: SPI device to which the transaction is queued
- * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
+ * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual
  *	addresses for each transfer buffer
  * @complete: called to report transaction completions
  * @context: the argument to complete() when it's called
@@ -1079,8 +1084,10 @@ struct spi_transfer {
  * @status: zero for success, else negative errno
  * @queue: for use by whichever driver currently owns the message
  * @state: for use by whichever driver currently owns the message
- * @resources: for resource management when the spi message is processed
+ * @resources: for resource management when the SPI message is processed
  * @prepared: spi_prepare_message was called for the this message
+ * @t: for use with spi_message_alloc() when message and transfers have
+ *	been allocated together
  *
  * A @spi_message is used to execute an atomic sequence of data transfers,
  * each represented by a struct spi_transfer.  The sequence is "atomic"
@@ -1106,7 +1113,8 @@ struct spi_message {
 	/* spi_prepare_message() was called for this message */
 	bool			prepared;
 
-	/* REVISIT:  we might want a flag affecting the behavior of the
+	/*
+	 * REVISIT: we might want a flag affecting the behavior of the
 	 * last transfer ... allowing things like "read 16 bit length L"
 	 * immediately followed by "read L bytes".  Basically imposing
 	 * a specific message scheduling algorithm.
@@ -1124,15 +1132,19 @@ struct spi_message {
 	unsigned		frame_length;
 	unsigned		actual_length;
 
-	/* For optional use by whatever driver currently owns the
+	/*
+	 * For optional use by whatever driver currently owns the
 	 * spi_message ...  between calls to spi_async and then later
 	 * complete(), that's the spi_controller controller driver.
 	 */
 	struct list_head	queue;
 	void			*state;
 
-	/* List of spi_res reources when the spi message is processed */
+	/* List of spi_res resources when the SPI message is processed */
 	struct list_head        resources;
+
+	/* For embedding transfers into the memory of the message */
+	struct spi_transfer	t[];
 };
 
 static inline void spi_message_init_no_memset(struct spi_message *m)
@@ -1168,7 +1180,7 @@ spi_transfer_delay_exec(struct spi_transfer *t)
 /**
  * spi_message_init_with_transfers - Initialize spi_message and append transfers
  * @m: spi_message to be initialized
- * @xfers: An array of spi transfers
+ * @xfers: An array of SPI transfers
  * @num_xfers: Number of items in the xfer array
  *
  * This function initializes the given spi_message and adds each spi_transfer in
@@ -1185,24 +1197,21 @@ struct spi_transfer *xfers, unsigned int num_xfers)
 		spi_message_add_tail(&xfers[i], m);
 }
 
-/* It's fine to embed message and transaction structures in other data
+/*
+ * It's fine to embed message and transaction structures in other data
  * structures so long as you don't free them while they're in use.
  */
-
 static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags)
 {
 	struct spi_message *m;
 
-	m = kzalloc(sizeof(struct spi_message)
-			+ ntrans * sizeof(struct spi_transfer),
-			flags);
+	m = kzalloc(struct_size(m, t, ntrans), flags);
 	if (m) {
 		unsigned i;
-		struct spi_transfer *t = (struct spi_transfer *)(m + 1);
 
 		spi_message_init_no_memset(m);
-		for (i = 0; i < ntrans; i++, t++)
-			spi_message_add_tail(t, m);
+		for (i = 0; i < ntrans; i++)
+			spi_message_add_tail(&m->t[i], m);
 	}
 	return m;
 }
@@ -1291,7 +1300,7 @@ typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr,
  *                                 replacements that have occurred
  *                                 so that they can get reverted
  * @release:            some extra release code to get executed prior to
- *                      relasing this structure
+ *                      releasing this structure
  * @extradata:          pointer to some extra data if requested or NULL
  * @replaced_transfers: transfers that have been replaced and which need
  *                      to get restored
@@ -1301,9 +1310,9 @@ typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr,
  * @inserted_transfers: array of spi_transfers of array-size @inserted,
  *                      that have been replacing replaced_transfers
  *
- * note: that @extradata will point to @inserted_transfers[@inserted]
+ * Note: that @extradata will point to @inserted_transfers[@inserted]
  * if some extra allocation is requested, so alignment will be the same
- * as for spi_transfers
+ * as for spi_transfers.
  */
 struct spi_replaced_transfers {
 	spi_replaced_release_t release;
@@ -1329,7 +1338,8 @@ extern int spi_split_transfers_maxwords(struct spi_controller *ctlr,
 
 /*---------------------------------------------------------------------------*/
 
-/* All these synchronous SPI transfer routines are utilities layered
+/*
+ * All these synchronous SPI transfer routines are utilities layered
  * over the core async transfer primitive.  Here, "synchronous" means
  * they will sleep uninterruptibly until the async transfer completes.
  */
@@ -1472,7 +1482,7 @@ static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd)
  *
  * Callable only from contexts that can sleep.
  *
- * Return: the (unsigned) sixteen bit number returned by the device in cpu
+ * Return: the (unsigned) sixteen bit number returned by the device in CPU
  * endianness, or else a negative error code.
  */
 static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
@@ -1500,7 +1510,7 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * As a rule, SPI devices can't be probed.  Instead, board init code
  * provides a table listing the devices which are present, with enough
  * information to bind and set up the device's driver.  There's basic
- * support for nonstatic configurations too; enough to handle adding
+ * support for non-static configurations too; enough to handle adding
  * parport adapters, or microcontrollers acting as USB-to-SPI bridges.
  */
 
@@ -1537,12 +1547,13 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * are active in some dynamic board configuration models.
  */
 struct spi_board_info {
-	/* The device name and module name are coupled, like platform_bus;
+	/*
+	 * The device name and module name are coupled, like platform_bus;
 	 * "modalias" is normally the driver name.
 	 *
 	 * platform_data goes to spi_device.dev.platform_data,
 	 * controller_data goes to spi_device.controller_data,
-	 * irq is copied too
+	 * IRQ is copied too.
 	 */
 	char		modalias[SPI_NAME_SIZE];
 	const void	*platform_data;
@@ -1554,7 +1565,8 @@ struct spi_board_info {
 	u32		max_speed_hz;
 
 
-	/* bus_num is board specific and matches the bus_num of some
+	/*
+	 * bus_num is board specific and matches the bus_num of some
 	 * spi_controller that will probably be registered later.
 	 *
 	 * chip_select reflects how this chip is wired to that master;
@@ -1563,12 +1575,14 @@ struct spi_board_info {
 	u16		bus_num;
 	u16		chip_select;
 
-	/* mode becomes spi_device.mode, and is essential for chips
+	/*
+	 * mode becomes spi_device.mode, and is essential for chips
 	 * where the default of SPI_CS_HIGH = 0 is wrong.
 	 */
 	u32		mode;
 
-	/* ... may need additional spi_device chip config data here.
+	/*
+	 * ... may need additional spi_device chip config data here.
 	 * avoid stuff protocol drivers can set; but include stuff
 	 * needed to behave without being bound to a driver:
 	 *  - quirks like clock rate mattering when not selected
@@ -1585,7 +1599,8 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
 	{ return 0; }
 #endif
 
-/* If you're hotplugging an adapter with devices (parport, usb, etc)
+/*
+ * If you're hotplugging an adapter with devices (parport, USB, etc)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_controller().
@@ -1623,10 +1638,6 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer)
 #define spi_master			spi_controller
 
 #define SPI_MASTER_HALF_DUPLEX		SPI_CONTROLLER_HALF_DUPLEX
-#define SPI_MASTER_NO_RX		SPI_CONTROLLER_NO_RX
-#define SPI_MASTER_NO_TX		SPI_CONTROLLER_NO_TX
-#define SPI_MASTER_MUST_RX		SPI_CONTROLLER_MUST_RX
-#define SPI_MASTER_MUST_TX		SPI_CONTROLLER_MUST_TX
 
 #define spi_master_get_devdata(_ctlr)	spi_controller_get_devdata(_ctlr)
 #define spi_master_set_devdata(_ctlr, _data)	\
diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h
index c0248a8fa79c..e63d4a24d879 100644
--- a/include/trace/events/spi.h
+++ b/include/trace/events/spi.h
@@ -167,7 +167,7 @@ TRACE_EVENT(spi_message_done,
 );
 
 /*
- * consider a buffer valid if non-NULL and if it doesn't match the dummy buffer
+ * Consider a buffer valid if non-NULL and if it doesn't match the dummy buffer
  * that only exist to work with controllers that have SPI_CONTROLLER_MUST_TX or
  * SPI_CONTROLLER_MUST_RX.
  */