Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

7 files changed, 27 insertions, 7 deletions

diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 2cd12ebd6826..c8c42214e7fb 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -100,7 +100,8 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
-	IOCTL_SET_SD_TAPDELAY = 7,
+	IOCTL_SD_DLL_RESET = 6,
+	IOCTL_SET_SD_TAPDELAY,
 	IOCTL_SET_PLL_FRAC_MODE,
 	IOCTL_GET_PLL_FRAC_MODE,
 	IOCTL_SET_PLL_FRAC_DATA,
@@ -271,6 +272,12 @@ enum tap_delay_type {
 	PM_TAPDELAY_OUTPUT,
 };
 
+enum dll_reset_type {
+	PM_DLL_RESET_ASSERT,
+	PM_DLL_RESET_RELEASE,
+	PM_DLL_RESET_PULSE,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index b7ba8810a3b5..29aa50711626 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -107,9 +107,6 @@ struct mmc_command {
  */
 
 	unsigned int		busy_timeout;	/* busy detect timeout in ms */
-	/* Set this flag only for blocking sanitize request */
-	bool			sanitize_busy;
-
 	struct mmc_data		*data;		/* data segment associated with cmd */
 	struct mmc_request	*mrq;		/* associated request */
 };
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 4c5eb3aa8e72..c318fb5b6a94 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -322,6 +322,8 @@ struct mmc_host {
 #define MMC_CAP_3_3V_DDR	(1 << 11)	/* Host supports eMMC DDR 3.3V */
 #define MMC_CAP_1_8V_DDR	(1 << 12)	/* Host supports eMMC DDR 1.8V */
 #define MMC_CAP_1_2V_DDR	(1 << 13)	/* Host supports eMMC DDR 1.2V */
+#define MMC_CAP_DDR		(MMC_CAP_3_3V_DDR | MMC_CAP_1_8V_DDR | \
+				 MMC_CAP_1_2V_DDR)
 #define MMC_CAP_POWER_OFF_CARD	(1 << 14)	/* Can power off after boot */
 #define MMC_CAP_BUS_WIDTH_TEST	(1 << 15)	/* CMD14/CMD19 bus width ok */
 #define MMC_CAP_UHS_SDR12	(1 << 16)	/* Host supports UHS SDR12 mode */
@@ -463,7 +465,10 @@ struct mmc_host {
 	bool			cqe_enabled;
 	bool			cqe_on;
 
-	unsigned long		private[0] ____cacheline_aligned;
+	/* Host Software Queue support */
+	bool			hsq_enabled;
+
+	unsigned long		private[] ____cacheline_aligned;
 };
 
 struct device_node;
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 897a87c4c827..4b85ef05a906 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -161,6 +161,16 @@ static inline bool mmc_op_multi(u32 opcode)
 #define R1_STATE_PRG	7
 #define R1_STATE_DIS	8
 
+static inline bool mmc_ready_for_data(u32 status)
+{
+	/*
+	 * Some cards mishandle the status bits, so make sure to check both the
+	 * busy indication and the card state.
+	 */
+	return status & R1_READY_FOR_DATA &&
+	       R1_CURRENT_STATE(status) == R1_STATE_TRAN;
+}
+
 /*
  * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
  * R1 is the low order byte; R2 is the next highest byte, when present.
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 5a177f7a83c3..fa2aaab5e57a 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -25,7 +25,7 @@ struct sdio_func_tuple {
 	struct sdio_func_tuple *next;
 	unsigned char code;
 	unsigned char size;
-	unsigned char data[0];
+	unsigned char data[];
 };
 
 /*
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
index 6c006078c8a1..0434f68eda86 100644
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -37,5 +37,6 @@ struct esdhc_platform_data {
 	unsigned int delay_line;
 	unsigned int tuning_step;       /* The delay cell steps in tuning procedure */
 	unsigned int tuning_start_tap;	/* The start delay cell point in tuning procedure */
+	unsigned int strobe_dll_delay_target;	/* The delay cell for strobe pad (read clock) */
 };
 #endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/include/uapi/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h
index 00c08120f3ba..98e29e7f54ac 100644
--- a/include/uapi/linux/mmc/ioctl.h
+++ b/include/uapi/linux/mmc/ioctl.h
@@ -57,7 +57,7 @@ struct mmc_ioc_cmd {
  */
 struct mmc_ioc_multi_cmd {
 	__u64 num_of_cmds;
-	struct mmc_ioc_cmd cmds[0];
+	struct mmc_ioc_cmd cmds[];
 };
 
 #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)