ASoC: Rename ep93xx soc directory to cirrus

This patch is to rename the directory "ep93xx" in "cirrus".
Name more accurately reflects the manufacturer and allows to add
drivers not only for architecture ep93xx in this directory.
Patch not contain any functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 435 insertions, 0 deletions

diff --git a/sound/soc/cirrus/ep93xx-ac97.c b/sound/soc/cirrus/ep93xx-ac97.c
new file mode 100644
index 000000000000..bdffab33e160
--- /dev/null
+++ b/sound/soc/cirrus/ep93xx-ac97.c
@@ -0,0 +1,435 @@
+/*
+ * ASoC driver for Cirrus Logic EP93xx AC97 controller.
+ *
+ * Copyright (c) 2010 Mika Westerberg
+ *
+ * Based on s3c-ac97 ASoC driver by Jaswinder Singh.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/ac97_codec.h>
+#include <sound/soc.h>
+
+#include <mach/dma.h>
+#include "ep93xx-pcm.h"
+
+/*
+ * Per channel (1-4) registers.
+ */
+#define AC97CH(n)		(((n) - 1) * 0x20)
+
+#define AC97DR(n)		(AC97CH(n) + 0x0000)
+
+#define AC97RXCR(n)		(AC97CH(n) + 0x0004)
+#define AC97RXCR_REN		BIT(0)
+#define AC97RXCR_RX3		BIT(3)
+#define AC97RXCR_RX4		BIT(4)
+#define AC97RXCR_CM		BIT(15)
+
+#define AC97TXCR(n)		(AC97CH(n) + 0x0008)
+#define AC97TXCR_TEN		BIT(0)
+#define AC97TXCR_TX3		BIT(3)
+#define AC97TXCR_TX4		BIT(4)
+#define AC97TXCR_CM		BIT(15)
+
+#define AC97SR(n)		(AC97CH(n) + 0x000c)
+#define AC97SR_TXFE		BIT(1)
+#define AC97SR_TXUE		BIT(6)
+
+#define AC97RISR(n)		(AC97CH(n) + 0x0010)
+#define AC97ISR(n)		(AC97CH(n) + 0x0014)
+#define AC97IE(n)		(AC97CH(n) + 0x0018)
+
+/*
+ * Global AC97 controller registers.
+ */
+#define AC97S1DATA		0x0080
+#define AC97S2DATA		0x0084
+#define AC97S12DATA		0x0088
+
+#define AC97RGIS		0x008c
+#define AC97GIS			0x0090
+#define AC97IM			0x0094
+/*
+ * Common bits for RGIS, GIS and IM registers.
+ */
+#define AC97_SLOT2RXVALID	BIT(1)
+#define AC97_CODECREADY		BIT(5)
+#define AC97_SLOT2TXCOMPLETE	BIT(6)
+
+#define AC97EOI			0x0098
+#define AC97EOI_WINT		BIT(0)
+#define AC97EOI_CODECREADY	BIT(1)
+
+#define AC97GCR			0x009c
+#define AC97GCR_AC97IFE		BIT(0)
+
+#define AC97RESET		0x00a0
+#define AC97RESET_TIMEDRESET	BIT(0)
+
+#define AC97SYNC		0x00a4
+#define AC97SYNC_TIMEDSYNC	BIT(0)
+
+#define AC97_TIMEOUT		msecs_to_jiffies(5)
+
+/**
+ * struct ep93xx_ac97_info - EP93xx AC97 controller info structure
+ * @lock: mutex serializing access to the bus (slot 1 & 2 ops)
+ * @dev: pointer to the platform device dev structure
+ * @regs: mapped AC97 controller registers
+ * @done: bus ops wait here for an interrupt
+ */
+struct ep93xx_ac97_info {
+	struct mutex		lock;
+	struct device		*dev;
+	void __iomem		*regs;
+	struct completion	done;
+};
+
+/* currently ALSA only supports a single AC97 device */
+static struct ep93xx_ac97_info *ep93xx_ac97_info;
+
+static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = {
+	.name		= "ac97-pcm-out",
+	.dma_port	= EP93XX_DMA_AAC1,
+};
+
+static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = {
+	.name		= "ac97-pcm-in",
+	.dma_port	= EP93XX_DMA_AAC1,
+};
+
+static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info,
+					    unsigned reg)
+{
+	return __raw_readl(info->regs + reg);
+}
+
+static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info,
+					 unsigned reg, unsigned val)
+{
+	__raw_writel(val, info->regs + reg);
+}
+
+static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97,
+				       unsigned short reg)
+{
+	struct ep93xx_ac97_info *info = ep93xx_ac97_info;
+	unsigned short val;
+
+	mutex_lock(&info->lock);
+
+	ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
+	ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID);
+	if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) {
+		dev_warn(info->dev, "timeout reading register %x\n", reg);
+		mutex_unlock(&info->lock);
+		return -ETIMEDOUT;
+	}
+	val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA);
+
+	mutex_unlock(&info->lock);
+	return val;
+}
+
+static void ep93xx_ac97_write(struct snd_ac97 *ac97,
+			      unsigned short reg,
+			      unsigned short val)
+{
+	struct ep93xx_ac97_info *info = ep93xx_ac97_info;
+
+	mutex_lock(&info->lock);
+
+	/*
+	 * Writes to the codec need to be done so that slot 2 is filled in
+	 * before slot 1.
+	 */
+	ep93xx_ac97_write_reg(info, AC97S2DATA, val);
+	ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
+
+	ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE);
+	if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
+		dev_warn(info->dev, "timeout writing register %x\n", reg);
+
+	mutex_unlock(&info->lock);
+}
+
+static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct ep93xx_ac97_info *info = ep93xx_ac97_info;
+
+	mutex_lock(&info->lock);
+
+	/*
+	 * We are assuming that before this functions gets called, the codec
+	 * BIT_CLK is stopped by forcing the codec into powerdown mode. We can
+	 * control the SYNC signal directly via AC97SYNC register. Using
+	 * TIMEDSYNC the controller will keep the SYNC high > 1us.
+	 */
+	ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC);
+	ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
+	if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
+		dev_warn(info->dev, "codec warm reset timeout\n");
+
+	mutex_unlock(&info->lock);
+}
+
+static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct ep93xx_ac97_info *info = ep93xx_ac97_info;
+
+	mutex_lock(&info->lock);
+
+	/*
+	 * For doing cold reset, we disable the AC97 controller interface, clear
+	 * WINT and CODECREADY bits, and finally enable the interface again.
+	 */
+	ep93xx_ac97_write_reg(info, AC97GCR, 0);
+	ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT);
+	ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE);
+
+	/*
+	 * Now, assert the reset and wait for the codec to become ready.
+	 */
+	ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET);
+	ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
+	if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
+		dev_warn(info->dev, "codec cold reset timeout\n");
+
+	/*
+	 * Give the codec some time to come fully out from the reset. This way
+	 * we ensure that the subsequent reads/writes will work.
+	 */
+	usleep_range(15000, 20000);
+
+	mutex_unlock(&info->lock);
+}
+
+static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id)
+{
+	struct ep93xx_ac97_info *info = dev_id;
+	unsigned status, mask;
+
+	/*
+	 * Just mask out the interrupt and wake up the waiting thread.
+	 * Interrupts are cleared via reading/writing to slot 1 & 2 registers by
+	 * the waiting thread.
+	 */
+	status = ep93xx_ac97_read_reg(info, AC97GIS);
+	mask = ep93xx_ac97_read_reg(info, AC97IM);
+	mask &= ~status;
+	ep93xx_ac97_write_reg(info, AC97IM, mask);
+
+	complete(&info->done);
+	return IRQ_HANDLED;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= ep93xx_ac97_read,
+	.write		= ep93xx_ac97_write,
+	.reset		= ep93xx_ac97_cold_reset,
+	.warm_reset	= ep93xx_ac97_warm_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
+			       int cmd, struct snd_soc_dai *dai)
+{
+	struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai);
+	unsigned v = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			/*
+			 * Enable compact mode, TX slots 3 & 4, and the TX FIFO
+			 * itself.
+			 */
+			v |= AC97TXCR_CM;
+			v |= AC97TXCR_TX3 | AC97TXCR_TX4;
+			v |= AC97TXCR_TEN;
+			ep93xx_ac97_write_reg(info, AC97TXCR(1), v);
+		} else {
+			/*
+			 * Enable compact mode, RX slots 3 & 4, and the RX FIFO
+			 * itself.
+			 */
+			v |= AC97RXCR_CM;
+			v |= AC97RXCR_RX3 | AC97RXCR_RX4;
+			v |= AC97RXCR_REN;
+			ep93xx_ac97_write_reg(info, AC97RXCR(1), v);
+		}
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			/*
+			 * As per Cirrus EP93xx errata described below:
+			 *
+			 * http://www.cirrus.com/en/pubs/errata/ER667E2B.pdf
+			 *
+			 * we will wait for the TX FIFO to be empty before
+			 * clearing the TEN bit.
+			 */
+			unsigned long timeout = jiffies + AC97_TIMEOUT;
+
+			do {
+				v = ep93xx_ac97_read_reg(info, AC97SR(1));
+				if (time_after(jiffies, timeout)) {
+					dev_warn(info->dev, "TX timeout\n");
+					break;
+				}
+			} while (!(v & (AC97SR_TXFE | AC97SR_TXUE)));
+
+			/* disable the TX FIFO */
+			ep93xx_ac97_write_reg(info, AC97TXCR(1), 0);
+		} else {
+			/* disable the RX FIFO */
+			ep93xx_ac97_write_reg(info, AC97RXCR(1), 0);
+		}
+		break;
+
+	default:
+		dev_warn(info->dev, "unknown command %d\n", cmd);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ep93xx_ac97_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct ep93xx_pcm_dma_params *dma_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &ep93xx_ac97_pcm_out;
+	else
+		dma_data = &ep93xx_ac97_pcm_in;
+
+	snd_soc_dai_set_dma_data(dai, substream, dma_data);
+	return 0;
+}
+
+static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = {
+	.startup	= ep93xx_ac97_startup,
+	.trigger	= ep93xx_ac97_trigger,
+};
+
+static struct snd_soc_dai_driver ep93xx_ac97_dai = {
+	.name		= "ep93xx-ac97",
+	.id		= 0,
+	.ac97_control	= 1,
+	.playback	= {
+		.stream_name	= "AC97 Playback",
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= SNDRV_PCM_RATE_8000_48000,
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture	= {
+		.stream_name	= "AC97 Capture",
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= SNDRV_PCM_RATE_8000_48000,
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.ops			= &ep93xx_ac97_dai_ops,
+};
+
+static int __devinit ep93xx_ac97_probe(struct platform_device *pdev)
+{
+	struct ep93xx_ac97_info *info;
+	struct resource *res;
+	unsigned int irq;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	info->regs = devm_request_and_ioremap(&pdev->dev, res);
+	if (!info->regs)
+		return -ENXIO;
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq)
+		return -ENODEV;
+
+	ret = devm_request_irq(&pdev->dev, irq, ep93xx_ac97_interrupt,
+			       IRQF_TRIGGER_HIGH, pdev->name, info);
+	if (ret)
+		goto fail;
+
+	dev_set_drvdata(&pdev->dev, info);
+
+	mutex_init(&info->lock);
+	init_completion(&info->done);
+	info->dev = &pdev->dev;
+
+	ep93xx_ac97_info = info;
+	platform_set_drvdata(pdev, info);
+
+	ret = snd_soc_register_dai(&pdev->dev, &ep93xx_ac97_dai);
+	if (ret)
+		goto fail;
+
+	return 0;
+
+fail:
+	platform_set_drvdata(pdev, NULL);
+	ep93xx_ac97_info = NULL;
+	dev_set_drvdata(&pdev->dev, NULL);
+	return ret;
+}
+
+static int __devexit ep93xx_ac97_remove(struct platform_device *pdev)
+{
+	struct ep93xx_ac97_info	*info = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_dai(&pdev->dev);
+
+	/* disable the AC97 controller */
+	ep93xx_ac97_write_reg(info, AC97GCR, 0);
+
+	platform_set_drvdata(pdev, NULL);
+	ep93xx_ac97_info = NULL;
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_ac97_driver = {
+	.probe	= ep93xx_ac97_probe,
+	.remove	= __devexit_p(ep93xx_ac97_remove),
+	.driver = {
+		.name = "ep93xx-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(ep93xx_ac97_driver);
+
+MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-ac97");