tools/power/x86/intel-speed-select: Adjust scope of core-power config

When core-power configuration or enabled is modified, this is only done
for compute dies. But the config must also be set to cores with no CPUs.
Without this the configuration is not affective.

On displaying config information, allow display for non compute dies
also.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

1 files changed, 35 insertions, 8 deletions

diff --git a/tools/power/x86/intel-speed-select/isst-core-tpmi.c b/tools/power/x86/intel-speed-select/isst-core-tpmi.c
index 19caa9c78d41..3458768562e5 100644
--- a/tools/power/x86/intel-speed-select/isst-core-tpmi.c
+++ b/tools/power/x86/intel-speed-select/isst-core-tpmi.c
@@ -641,16 +641,30 @@ static int tpmi_pm_qos_config(struct isst_id *id, int enable_clos,
 			      int priority_type)
 {
 	struct isst_core_power info;
-	int ret;
+	int i, ret, saved_punit;
 
 	info.get_set = 1;
 	info.socket_id = id->pkg;
 	info.power_domain_id = id->punit;
 	info.enable = enable_clos;
 	info.priority_type = priority_type;
-	ret = tpmi_process_ioctl(ISST_IF_CORE_POWER_STATE, &info);
-	if (ret == -1)
-		return ret;
+
+	saved_punit = id->punit;
+
+	/* Set for all other dies also. This is per package setting */
+	for (i = 0; i < MAX_PUNIT_PER_DIE; i++) {
+		id->punit = i;
+		if (isst_is_punit_valid(id)) {
+			info.power_domain_id = i;
+			ret = tpmi_process_ioctl(ISST_IF_CORE_POWER_STATE, &info);
+			if (ret == -1) {
+				id->punit = saved_punit;
+				return ret;
+			}
+		}
+	}
+
+	id->punit = saved_punit;
 
 	return 0;
 }
@@ -686,7 +700,7 @@ int tpmi_set_clos(struct isst_id *id, int clos,
 		  struct isst_clos_config *clos_config)
 {
 	struct isst_clos_param info;
-	int ret;
+	int i, ret, saved_punit;
 
 	info.get_set = 1;
 	info.socket_id = id->pkg;
@@ -702,9 +716,22 @@ int tpmi_set_clos(struct isst_id *id, int clos,
 	if (info.max_freq_mhz <= 0xff)
 		info.max_freq_mhz *= 100;
 
-	ret = tpmi_process_ioctl(ISST_IF_CLOS_PARAM, &info);
-	if (ret == -1)
-		return ret;
+	saved_punit = id->punit;
+
+	/* Set for all other dies also. This is per package setting */
+	for (i = 0; i < MAX_PUNIT_PER_DIE; i++) {
+		id->punit = i;
+		if (isst_is_punit_valid(id)) {
+			info.power_domain_id = i;
+			ret = tpmi_process_ioctl(ISST_IF_CLOS_PARAM, &info);
+			if (ret == -1) {
+				id->punit = saved_punit;
+				return ret;
+			}
+		}
+	}
+
+	id->punit = saved_punit;
 
 	debug_printf("set cpu:%d clos:%d min:%d max:%d\n", id->cpu, clos,
 		     clos_config->clos_min, clos_config->clos_max);