Merge branch 'net-Add-address-attribute-to-control-metric-of-prefix-route'

David Ahern says:

====================
net: Add address attribute to control metric of prefix route

For use cases such as VRR (Virtual Router Redundancy) interface managers
want efficient control over the order of prefix routes when multiple
interfaces have addresses with overlapping/duplicate subnets.

Currently, if two interfaces have addresses in the same subnet, the order
of the prefix route entries is determined by the order in which the
addresses are assigned or the links brought up. Any actions like cycling
an interface up and down changes that order. This set adds a new attribute
for addresses to allow a user to specify the metric of the prefix route
associated with an address giving interface managers better and more
efficient control of the order of prefix routes.

Patches 1-3 refactor IPv6 address add functions to pass an ifa6_config
struct. The functions currently have a long list of arguments and adding
the metric just makes it worse. Because of the overall diff size in
moving the arguments to a struct, the change is done in stages to make
it easier to review starting with the bottom function and pushing the
struct up to callers in each successive patch.

Patch 4 introduces the new attribute.

Patches 5 and 6 add support for the new attribute to IPv4 and IPv6
addresses.

Patch 7 adds a set of test cases.

Patch 8 adds support to iproute2

Changes since RFC
- collapsed patches 1 and 3 into patch 2
- simplified stack variables in fib_modify_prefix_metric in patch 5
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 180 insertions, 1 deletions

diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index e7d76fbc36e9..9780c5a2d73f 100755..100644
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -6,7 +6,8 @@
 
 ret=0
 
-TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt"
+# all tests in this script. Can be overridden with -t option
+TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric"
 VERBOSE=0
 PAUSE_ON_FAIL=no
 PAUSE=no
@@ -642,6 +643,8 @@ check_route6()
 	local rc=0
 
 	out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//')
+	[ "${out}" = "${expected}" ] && return 0
+
 	if [ -z "${out}" ]; then
 		if [ "$VERBOSE" = "1" ]; then
 			printf "\nNo route entry found\n"
@@ -911,6 +914,98 @@ ipv6_route_test()
 	route_cleanup
 }
 
+ip_addr_metric_check()
+{
+	ip addr help 2>&1 | grep -q metric
+	if [ $? -ne 0 ]; then
+		echo "iproute2 command does not support metric for addresses. Skipping test"
+		return 1
+	fi
+
+	return 0
+}
+
+ipv6_addr_metric_test()
+{
+	local rc
+
+	echo
+	echo "IPv6 prefix route tests"
+
+	ip_addr_metric_check || return 1
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li add dummy2 type dummy
+	$IP li set dummy1 up
+	$IP li set dummy2 up
+
+	# default entry is metric 256
+	run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 256 2001:db8:104::/64 dev dummy2 proto kernel metric 256"
+	log_test $? 0 "Default metric"
+
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy1"
+	run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64 metric 257"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 256 2001:db8:104::/64 dev dummy1 proto kernel metric 257"
+	log_test $? 0 "User specified metric on first device"
+
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy2"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64 metric 258"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 257 2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+	log_test $? 0 "User specified metric on second device"
+
+	run_cmd "$IP -6 addr del dev dummy1 2001:db8:104::1/64 metric 257"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+		rc=$?
+	fi
+	log_test $rc 0 "Delete of address on first device"
+
+	run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::2/64 metric 259"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of address"
+
+	# verify prefix route removed on down
+	run_cmd "ip netns exec testns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
+	run_cmd "$IP li set dev dummy2 down"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 ""
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route removed on link down"
+
+	# verify prefix route re-inserted with assigned metric
+	run_cmd "$IP li set dev dummy2 up"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route with metric on link up"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
 # add route for a prefix, flushing any existing routes first
 # expected to be the first step of a test
 add_route()
@@ -955,6 +1050,8 @@ check_route()
 	local rc=0
 
 	out=$($IP ro ls match ${pfx})
+	[ "${out}" = "${expected}" ] && return 0
+
 	if [ -z "${out}" ]; then
 		if [ "$VERBOSE" = "1" ]; then
 			printf "\nNo route entry found\n"
@@ -1181,6 +1278,86 @@ ipv4_route_test()
 	route_cleanup
 }
 
+ipv4_addr_metric_test()
+{
+	local rc
+
+	echo
+	echo "IPv4 prefix route tests"
+
+	ip_addr_metric_check || return 1
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li add dummy2 type dummy
+	$IP li set dummy1 up
+	$IP li set dummy2 up
+
+	# default entry is metric 256
+	run_cmd "$IP addr add dev dummy1 172.16.104.1/24"
+	run_cmd "$IP addr add dev dummy2 172.16.104.2/24"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2"
+	log_test $? 0 "Default metric"
+
+	set -e
+	run_cmd "$IP addr flush dev dummy1"
+	run_cmd "$IP addr add dev dummy1 172.16.104.1/24 metric 257"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257"
+	log_test $? 0 "User specified metric on first device"
+
+	set -e
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.2/24 metric 258"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+	log_test $? 0 "User specified metric on second device"
+
+	run_cmd "$IP addr del dev dummy1 172.16.104.1/24 metric 257"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+		rc=$?
+	fi
+	log_test $rc 0 "Delete of address on first device"
+
+	run_cmd "$IP addr change dev dummy2 172.16.104.2/24 metric 259"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of address"
+
+	# verify prefix route removed on down
+	run_cmd "$IP li set dev dummy2 down"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route ""
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route removed on link down"
+
+	# verify prefix route re-inserted with assigned metric
+	run_cmd "$IP li set dev dummy2 up"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route with metric on link up"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
 ################################################################################
 # usage
 
@@ -1245,6 +1422,8 @@ do
 	fib_nexthop_test|nexthop)	fib_nexthop_test;;
 	ipv6_route_test|ipv6_rt)	ipv6_route_test;;
 	ipv4_route_test|ipv4_rt)	ipv4_route_test;;
+	ipv6_addr_metric)		ipv6_addr_metric_test;;
+	ipv4_addr_metric)		ipv4_addr_metric_test;;
 
 	help) echo "Test names: $TESTS"; exit 0;;
 	esac