diff options
| -rw-r--r-- | include/linux/hrtimer.h | 1 | ||||
| -rw-r--r-- | include/linux/interrupt.h | 3 | ||||
| -rw-r--r-- | kernel/time/hrtimer.c | 163 | ||||
| -rw-r--r-- | kernel/time/tick-common.c | 10 | ||||
| -rw-r--r-- | kernel/time/timer.c | 2 |
5 files changed, 55 insertions, 124 deletions
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index d194c1dacdaa..048270a27bc5 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -459,7 +459,6 @@ extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode); /* Soft interrupt function to run the hrtimer queues: */ extern void hrtimer_run_queues(void); -extern void hrtimer_run_pending(void); /* Bootup initialization: */ extern void __init hrtimers_init(void); diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 950ae4501826..6bf15a66bce7 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -413,7 +413,8 @@ enum BLOCK_IOPOLL_SOFTIRQ, TASKLET_SOFTIRQ, SCHED_SOFTIRQ, - HRTIMER_SOFTIRQ, + HRTIMER_SOFTIRQ, /* Unused, but kept as tools rely on the + numbering. Sigh! */ RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ NR_SOFTIRQS diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 30178d0656cf..fc6b6d25f93d 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -555,59 +555,48 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) } /* - * Shared reprogramming for clock_realtime and clock_monotonic - * * When a timer is enqueued and expires earlier than the already enqueued * timers, we have to check, whether it expires earlier than the timer for * which the clock event device was armed. * - * Note, that in case the state has HRTIMER_STATE_CALLBACK set, no reprogramming - * and no expiry check happens. The timer gets enqueued into the rbtree. The - * reprogramming and expiry check is done in the hrtimer_interrupt or in the - * softirq. - * * Called with interrupts disabled and base->cpu_base.lock held */ -static int hrtimer_reprogram(struct hrtimer *timer, - struct hrtimer_clock_base *base) +static void hrtimer_reprogram(struct hrtimer *timer, + struct hrtimer_clock_base *base) { struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset); - int res; WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0); /* - * When the callback is running, we do not reprogram the clock event - * device. The timer callback is either running on a different CPU or - * the callback is executed in the hrtimer_interrupt context. The - * reprogramming is handled either by the softirq, which called the - * callback or at the end of the hrtimer_interrupt. + * If the timer is not on the current cpu, we cannot reprogram + * the other cpus clock event device. */ - if (hrtimer_callback_running(timer)) - return 0; + if (base->cpu_base != cpu_base) + return; + + /* + * If the hrtimer interrupt is running, then it will + * reevaluate the clock bases and reprogram the clock event + * device. The callbacks are always executed in hard interrupt + * context so we don't need an extra check for a running + * callback. + */ + if (cpu_base->in_hrtirq) + return; /* * CLOCK_REALTIME timer might be requested with an absolute - * expiry time which is less than base->offset. Nothing wrong - * about that, just avoid to call into the tick code, which - * has now objections against negative expiry values. + * expiry time which is less than base->offset. Set it to 0. */ if (expires.tv64 < 0) - return -ETIME; + expires.tv64 = 0; if (expires.tv64 >= cpu_base->expires_next.tv64) - return 0; - - /* - * When the target cpu of the timer is currently executing - * hrtimer_interrupt(), then we do not touch the clock event - * device. hrtimer_interrupt() will reevaluate all clock bases - * before reprogramming the device. - */ - if (cpu_base->in_hrtirq) - return 0; + return; + /* Update the pointer to the next expiring timer */ cpu_base->next_timer = timer; /* @@ -617,15 +606,14 @@ static int hrtimer_reprogram(struct hrtimer *timer, * to make progress. */ if (cpu_base->hang_detected) - return 0; + return; /* - * Clockevents returns -ETIME, when the event was in the past. + * Program the timer hardware. We enforce the expiry for + * events which are already in the past. */ - res = tick_program_event(expires, 0); - if (!IS_ERR_VALUE(res)) - cpu_base->expires_next = expires; - return res; + cpu_base->expires_next = expires; + tick_program_event(expires, 1); } /* @@ -660,19 +648,11 @@ static void retrigger_next_event(void *arg) */ static int hrtimer_switch_to_hres(void) { - int cpu = smp_processor_id(); - struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu); - unsigned long flags; - - if (base->hres_active) - return 1; - - local_irq_save(flags); + struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases); if (tick_init_highres()) { - local_irq_restore(flags); printk(KERN_WARNING "Could not switch to high resolution " - "mode on CPU %d\n", cpu); + "mode on CPU %d\n", base->cpu); return 0; } base->hres_active = 1; @@ -681,7 +661,6 @@ static int hrtimer_switch_to_hres(void) tick_setup_sched_timer(); /* "Retrigger" the interrupt to get things going */ retrigger_next_event(NULL); - local_irq_restore(flags); return 1; } @@ -984,26 +963,8 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, * on dynticks target. */ wake_up_nohz_cpu(new_base->cpu_base->cpu); - } else if (new_base->cpu_base == this_cpu_ptr(&hrtimer_bases) && - hrtimer_reprogram(timer, new_base)) { - /* - * Only allow reprogramming if the new base is on this CPU. - * (it might still be on another CPU if the timer was pending) - * - * XXX send_remote_softirq() ? - */ - if (wakeup) { - /* - * We need to drop cpu_base->lock to avoid a - * lock ordering issue vs. rq->lock. - */ - raw_spin_unlock(&new_base->cpu_base->lock); - raise_softirq_irqoff(HRTIMER_SOFTIRQ); - local_irq_restore(flags); - return ret; - } else { - __raise_softirq_irqoff(HRTIMER_SOFTIRQ); - } + } else { + hrtimer_reprogram(timer, new_base); } unlock_hrtimer_base(timer, &flags); @@ -1354,7 +1315,7 @@ retry: * local version of hrtimer_peek_ahead_timers() called with interrupts * disabled. */ -static void __hrtimer_peek_ahead_timers(void) +static inline void __hrtimer_peek_ahead_timers(void) { struct tick_device *td; @@ -1366,29 +1327,6 @@ static void __hrtimer_peek_ahead_timers(void) hrtimer_interrupt(td->evtdev); } -/** - * hrtimer_peek_ahead_timers -- run soft-expired timers now - * - * hrtimer_peek_ahead_timers will peek at the timer queue of - * the current cpu and check if there are any timers for which - * the soft expires time has passed. If any such timers exist, - * they are run immediately and then removed from the timer queue. - * - */ -void hrtimer_peek_ahead_timers(void) -{ - unsigned long flags; - - local_irq_save(flags); - __hrtimer_peek_ahead_timers(); - local_irq_restore(flags); -} - -static void run_hrtimer_softirq(struct softirq_action *h) -{ - hrtimer_peek_ahead_timers(); -} - #else /* CONFIG_HIGH_RES_TIMERS */ static inline void __hrtimer_peek_ahead_timers(void) { } @@ -1396,31 +1334,7 @@ static inline void __hrtimer_peek_ahead_timers(void) { } #endif /* !CONFIG_HIGH_RES_TIMERS */ /* - * Called from timer softirq every jiffy, expire hrtimers: - * - * For HRT its the fall back code to run the softirq in the timer - * softirq context in case the hrtimer initialization failed or has - * not been done yet. - */ -void hrtimer_run_pending(void) -{ - if (hrtimer_hres_active()) - return; - - /* - * This _is_ ugly: We have to check in the softirq context, - * whether we can switch to highres and / or nohz mode. The - * clocksource switch happens in the timer interrupt with - * xtime_lock held. Notification from there only sets the - * check bit in the tick_oneshot code, otherwise we might - * deadlock vs. xtime_lock. - */ - if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) - hrtimer_switch_to_hres(); -} - -/* - * Called from hardirq context every jiffy + * Called from run_local_timers in hardirq context every jiffy */ void hrtimer_run_queues(void) { @@ -1430,6 +1344,18 @@ void hrtimer_run_queues(void) if (__hrtimer_hres_active(cpu_base)) return; + /* + * This _is_ ugly: We have to check periodically, whether we + * can switch to highres and / or nohz mode. The clocksource + * switch happens with xtime_lock held. Notification from + * there only sets the check bit in the tick_oneshot code, + * otherwise we might deadlock vs. xtime_lock. + */ + if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) { + hrtimer_switch_to_hres(); + return; + } + raw_spin_lock(&cpu_base->lock); now = hrtimer_update_base(cpu_base); __hrtimer_run_queues(cpu_base, now); @@ -1700,9 +1626,6 @@ void __init hrtimers_init(void) hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE, (void *)(long)smp_processor_id()); register_cpu_notifier(&hrtimers_nb); -#ifdef CONFIG_HIGH_RES_TIMERS - open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq); -#endif } /** diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 3ae6afa1eb98..ea5f9eae8f74 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -102,6 +102,16 @@ void tick_handle_periodic(struct clock_event_device *dev) tick_periodic(cpu); +#if defined(CONFIG_HIGH_RES_TIMERS) || defined(CONFIG_NO_HZ_COMMON) + /* + * The cpu might have transitioned to HIGHRES or NOHZ mode via + * update_process_times() -> run_local_timers() -> + * hrtimer_run_queues(). + */ + if (dev->event_handler != tick_handle_periodic) + return; +#endif + if (dev->state != CLOCK_EVT_STATE_ONESHOT) return; for (;;) { diff --git a/kernel/time/timer.c b/kernel/time/timer.c index 2ece3aa5069c..b31f13f4fe41 100644 --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -1409,8 +1409,6 @@ static void run_timer_softirq(struct softirq_action *h) { struct tvec_base *base = __this_cpu_read(tvec_bases); - hrtimer_run_pending(); - if (time_after_eq(jiffies, base->timer_jiffies)) __run_timers(base); } |